知识型企业中创造型团队的管理

主要对知识型企业中团队问题进行了研究。从团队领导、团队结构以及团队协作与企业家精神的关系等方面讨论了在知识型企业中建立创造型团队的重要性，并相应提出了人力资源政策建议。     

Characteristics from a hydrodynamic model of a trapezoidal artificial reef

Flume experiments and numerical simulation were conducted to characterize the hydrodynamics of a trapezoid artificial reef. Measurements in particle image velocimetry were conducted to observe the formation of upwelling and vortices; and forces for the reef model were measured by load cell. The results of flume experiments agree well with the numerical data. In addition, the flow structure around a reef combining trapezoidal and cubic blocks was simulated numerically under two deployment schemes, showing a more complicated flow structure than that of a stand-alone reef. Relationship between drag coefficient and Reynolds number suggest that the degree of turbulence can be assessed from the value of drag coefficient downstream from the reef. The role of the reef in water flow is to reduce flow velocity and generate turbulence.     

Conceptual design of a deep draft semi-submersible platform with a moveable heave-plate

Based on the principle of turned mass damper(TMD) systems,the conceptual design of semi-submersible platform with a moveable heave-plate(MHS) has been put forward.The heave motion response amplitude operator(RAO) and viscous damping of the MHS platform are calculated by iteration,and the coupling stiffness between the MHS hull and the heave-plate is optimized to decrease the maximum heave motion response of the MHS hull under 10-year survival conditions in the South China Sea.The nu-merical results indicate that the heave motion RAO of the MHS hull can be decreased in the range of predominant wave frequencies,which may provide some reference to the heave motion control of offshore platforms.     

Bearing mechanism of a tunnel-type anchorage in a railway suspension bridge

A tunnel-type anchorage(TTA) is one of the main components in suspension bridges: the bearing mechanism is a key problem. Investigating the deformation characteristics, development law, and failure phenomenon of a TTA under load can provide the theoretical basis for a robust design. Utilizing the TTA of the Jinsha River suspension bridge at Lijiang Shangri-La railway as a prototype, a laboratory model test of the TTA was carried out for three different contact conditions between the anchorage body and the surrounding rock. The stress and deformation distribution law of the anchorage body and its surrounding rock were studied, and the ultimate bearing capacity and failure mode of the TTA were analyzed. The test results show that the compressive stress level is highest at the rear part of the anchorage body. Moving away from the rear portion of the body, the stress decays in a negative exponential function. Based on the load transfer curve, the calculation formula for the shear stress on the contact surface between the anchorage body and the surrounding rock was derived, which shows that the distribution of the shear stress along the axial direction of the anchorage body is not uniform. The distance from the maximum value to the loading surface is approximately 1/3 of the length of the anchorage body, and the stress decreases as the distance from the loading surface increases. Furthermore, the contact condition between the anchorage body and surrounding rock has a great influence on the bearing capacity of the TTA. The increase in the anti-skid tooth ridge and radial anchor bolt can improve the cooperative working capacity of the anchorage body and the surrounding rock, which is approximately 50% higher than that of the flat contact condition. The main function of the anchor bolt is to increase the overall rigidity of the TTA. The contact condition between the anchorage body and the surrounding rock will lead to a change in the failure mode of the TTA. With an increase in the degree of contact, the failure mode will change from shear sliding along the interface to trumpet-shaped inverted cone-shaped failure extending into the surrounding rock.     

Landslide susceptibility: a statistically-based assessment on a depositional pyroclastic ramp

This study aimed to produce a high-quality landslide susceptibility map for Teziutlán municipality, a landslide-prone region in Mexico, which is characterised by a depositional pyroclastic ramp. The heterogeneous quality of available topographic information(i.e. higher resolution digital elevation model only for a sub-region) encouraged to confront modelling results based on two different study area delineations and two raster resolutions. Input data was based on the larger modelling region L15(163 km2) and smaller S(70 km2; located inside L15) with an associated raster cell size of 15 m(region L15 and S15) and 5 m(region S5). The resulting three data sets(L15, S15 and S5) were included into three differently flexible modelling techniques(Generalized Linear Model-GLM, General Additive Model-GAM, Support Vector Machine-SVM) to produce nine landslide susceptibility models. Preceding variable selection was performed heuristically and supported by an exploratory data analysis. The final models were based on the explanatory variables slope angle, slope aspect, lithology, relative slope position, elevation, convergence index, distance to streams, distance to springs and topographic wetness index. The ability of the models to classify independent test data was elaborated using a k-fold cross validation procedure and the AUROC(Area Under the Receiver Operating Characteristic) metric. In general, all produced landslide susceptibility maps depicted the hillslopes of the ravines, which cut the pyroclastic ramp, as prone to landsliding. The modelling results showed that predictive performances(i.e. AUROC values) slightly increased with an increasing flexibility of the applied modelling technique. Thus, SVM performed best, while the GAM outperformed the GLM. This tendency was most distinctive when modelling with the largest landslide sample size(i.e. data set L15; n = 662 landslides). Non-linear classifiers(GAMs, SVMs) performed slightly better when trained on the basis of lower raster resolution(data set S15) compared to the 5 m counterparts(data set S5). Highest predictive performance was obtained for the model based on data set L15 and the SVM classifier(median AUROC: 0.82). However, SVMs also indicated the highest degree of model overfitting. This study indicates that the decision to delineate a study area, the selection of a raster resolution as well as the chosen classification technique can affect varying aspects of subsequent modelling results. The results do not support the assumption that a higher raster resolution(i.e. a more detailed digital representation of the terrain) inevitably leads to better performing or geomorphically more plausible landslide susceptibility maps.     

Interception of sulfate deposition from a closed canopy to a forest gap edge canopy in a subalpine dragon spruce plantation

Reducing the threats of sulfate ion(SO_4~(2-))deposition to terrestrial ecosystems is a great challenge.The canopy interception effect on SO_4~(2-)deposition has been well documented,but the interception efficiency of the gap edge remains unknown.Therefore,a subalpine dragon spruce(Picea asperata) plantation was evaluated in the upper reaches of the Yangtze River.The dynamics of the SO_4~(2-) concentration in the throughfall were investigated from the gap edge to the closed canopy during the rainfall and snowfall periods from August 2015 to July 2016.The annual input of SO_4~(2-) totaled 2.56 kg/ha through rainfall and 0.69 kg/ha through snowfall.The total annual net interception fluxes(NIFs) of SO_4~(2-) at the gap edge and in the closed canopy were 1.48 kg/ha and 0.66 kg/ha,respectively,and the net interception ratios(NIRs) accounted for 45.40% and 20.25%,respectively.The NIF and the NIR of SO_4~(2-) at the gap edge were higher than those in the closed canopy.Therefore,the results suggested that a significant amount of SO_4~(2-) deposition was intercepted by the tree canopy in the subalpine plantation,with more SO_4~(2-) deposition at the gap edge than in the closed canopy,which is beneficial for improving the water quality in the upper reaches of the Yangtze River via forest management.     

Violent transient sloshing-wave interaction with a baffle in a three-dimensional numerical tank

A finite difference model for solving Navier Stokes equations with turbulence taken into account is used to investigate viscous liquid sloshing-wave interaction with baffles in a tank. The volume-of-fluid and virtual boundary force methods are employed to simulate free surface flow interaction with structures. A liquid sloshing experimental apparatus was established to evaluate the accuracy of the proposed model, as well as to study nonlinear sloshing in a prismatic tank with the baffles. Damping effects of sloshing in a rectangular tank with bottom-mounted vertical baffles and vertical baffles touching the free surface are studied numerically and experimentally. Good agreement is obtained between the present numerical results and experimental data. The numerical results match well with the current experimental data for strong nonlinear sloshing with large free surface slopes. The reduction in sloshing-wave elevation and impact pressure induced by the bottom-mounted vertical baffle and the vertical baffle touching the free surface is estimated by varying the external excitation frequency and the location and height of the vertical baffle under horizontal excitation.     

Effect of rainfall on a colluvial landslide in a debris flow valley

A colluvial landslide in a debris flow valley is a typical phenomena and is easily influenced by rainfall. The direct destructiveness of this kind of landslide is small, however, if failure occurs the resulting blocking of the channel may lead to a series of magnified secondary hazards. For this reason it is important to investigate the potential response of this type of landslide to rainfall. In the present paper, the Goulingping landslide, one of the colluvial landslides in the Goulingping valley in the middle of the Bailong River catchment in Gansu Province, China, was chosen for the study. Electrical Resistivity Tomography (ERT), Terrestrial Laser Scanning (TLS), together with traditional monitoring methods, were used to monitor changes in water content and the deformation of the landslide caused by rainfall. ERT was used to detect changes in soil water content induced by rainfall. The most significant findings were as follows:(1) the water content in the centralupper part (0~41 m) of the landslide was greater than in the central-front part (41~84 m) and (2) there was a relatively high resistivity zone at depth within the sliding zone. The deformation characteristics at the surface of the landslide were monitored by TLS and the results revealed that rainstorms caused three types of deformation and failure: (1) gully erosion at the slope surface; (2) shallow sliding failure; (3) and slope foot erosion. Subsequent monitoring of continuous changes in pore-water pressure, soil pressure and displacement (using traditional methods) indicated that long duration light rainfall (average 2.22 mm/d) caused the entire landslide to enter a state of creeping deformation at the beginning of the rainy season. Shear-induced dilation occurred for the fast sliding (30.09 mm/d) during the critical failure sub-phase (EF). Pore-water pressure in the sliding zone was affected by rainfall. In addition, the sliding L1 parts of the landslide exerted a discontinuous pressure on the L2 part. Through the monitoring and analysis, we conclude that this kind of landslide may have large deformation at the beginning and the late of the rainy season.     

Mechanisms involved in triggering debris flows within a cohesive gravel soil mass on a slope: a case in SW China

The triggering mechanisms of debris flows were explored in the field using artificial rainfall experiments in two gullies, Dawazi Gully and Aizi Gully, in Yunnan and Sichuan Provinces, China, respectively. The soils at both sites are bare, loose and cohesive gravel-dominated. The results of a direct shear test, rheological test and back-analysis using soil mass stability calculations indicate that the mechanisms responsible for triggering debris flows involved the decreases in static and dynamic resistance of the soil. The triggering processes can be divided into 7 stages: rainfall infiltration, generation of excess runoff, high pore water pressure, surface erosion, soil creep, soil slipping, debris flow triggering and debris flow increment. In addition, two critical steps are evident: (i) During the process of the soil mass changing from a static to a mobile state, its cohesion decreased sharply (e.g., the cohesion of the soil mass in Dawazi Gully decreased from 0.520 to 0.090 kPa, a decrease of 83%). This would have reduced the soil strength and the kinetic energy during slipping, eventually triggered the debris flow. (ii) When the soil mass began to slip, the velocity and the volume increment of the debris flow fluctuated as a result of the interaction of soil resistance and the sliding force. The displaced soil mass from the source area of the slope resulted in the deposition of a volume of soil more than 7 - 8 times greater than that in the source area.     

Drought Forecasting in a Semi-arid Watershed Using Climate Signals:a Neuro-fuzzy Modeling Approach

Large-scale annual climate indices were used to forecast annual drought conditions in the Maharlu-Bakhtegan watershed,located in Iran,using a neuro-fuzzy model.The Standardized Precipitation Index（SPI） was used as a proxy for drought conditions.Among the 45 climate indices considered,eight identified as most relevant were the Atlantic Multidecadal Oscillation（AMO）,Atlantic Meridional Mode（AMM）,the Bivariate ENSO Time series（BEST）,the East Central Tropical Pacific Surface Temperature（NINO 3.4）,the Central Tropical Pacific Surface Temperature（NINO 4）,the North Tropical Atlantic Index（NTA）,the Southern Oscillation Index（SOI）,and the Tropical Northern Atlantic Index（TNA）.These indices accounted for 81% of the variance in the Principal Components Analysis（PCA） method.The Atlantic surface temperature（SST：Atlantic） had an inverse relationship with SPI,and the AMM index had the highest correlation.Drought forecasts of neuro-fuzzy model demonstrate better prediction at a two-year lag compared to a stepwise regression model.     

Reproductive rate of a marine planktonic copepodLabidocera euchaet a Giesbrecht in Xiamen Harbor

Reproductive rate of a marine planktonic copepodLabidocera euchaeta Giesbrecht in Xiamen Harbor bor was studied during the period from April 1986 to August 1987. Results showed that rate of egg production (F, eggs/(♀, d)) was positively correlated with temperature (T,^oC) and body weight of spawning female (Wc, μgC) as:F=0.0637 (T−7)^0.7445 Wc. Each month a maximum rate of egg production occurred at one of the five experimental temperatures (10°, 15°, 25°, and 30°C) near the monthly mean field temperature. The available food density (P, μgC/ml) had significant effect on specific rate of egg production (Fc, %C ♀/d) as:Fc=0.1732 (P-0.0179)/P. The gross efficiency of egg production of ca 62% in carbon was independent of food density snd ingestion rate. Observations on in situ egg production and hatching rate demonstrated that this species reproduces continuously all the year round, with summer as its high reproductive season and winter a low one. Ten generations a year is also suggested based on the number of the peaks of average population egg production rate. This agreed well with the result obtained from the generation-time equations. Egg-laying pattern was also observed and discussed.     

Ground subsidence mechanism of a filling mine with a steeply inclined ore body

Long-term field monitoring finds that serious surface subsidence can still occur even if the high strength cemented fill method is adopted. Combining the results of numerical simulations with global position system(GPS) monitoring, we took a typical filling mining mine with a steeply inclined ore body as an example, and explored its ground subsidence mechanism. The results show that the ground subsidence caused by the mining of steep ore body is characterized by two settlement centers and a sign...     

Plant diversity as a good indicator of vegetation stability in a typical plateau wetland

Biotic indicators have been widely used to monitor wetland health. However, few studies have explicitly evaluated if plant diversity could serve as a useful community-level indicator of wetland stability, especially when wetlands are confronted with anthropogenic perturbations. Based on three-year record of wetland plant species abundance in Napahai plateau wetland, Shangri-la under the influence of varying anthropogenic perturbation types, our study tests the impact of such perturbations on plant richness and the relationship between ecosystem temporal stability and plant richness, and further assesses the effectiveness of using plant diversity indicator to probe ecosystem temporal stability of Napahai plateau wetland and the potential mechanisms. The results showed that anthropogenic perturbations could have contributed significantly to realistic variation in plant diversity, and further demonstrated that ecosystem temporal stability was positively related to realistic variation in plant diversity. In particular, communities with high levels of diversity might have better capacity to dampen perturbation impacts than communities with low levels of diversity, and statistical averaging could have played an important role in causing greater stability in more diverse communities. Also, asynchrony might have a stabilizing effect on community stability, and diversity could have stabilized communities through both species asynchrony and population stability propagation. Therefore, our results suggest that plant diversity could be used as a useful indicator of the stability conditions of plateau wetland ecosystems confronted with anthropogenic perturbations, and the preservation of plant communities at sufficient abundance and diversity is necessary for maintaining healthy plateau wetlands and for sustaining their essential ecosystem functions and services.     

欧氏空间En中任意两个平面间的距离

设πp为欧氏空间中过定点x0的p-维平面及πq为同一空间中过定点y0的q-维平面。得到了这两个平面间距离d(πp,πq)的一个简明计算公式。     

便携式气压计的电路与系统设计

简述了压力传感器的温度补偿技术以及如何选择恒流源和数据放大器,重点对气压计的系统电路进行了设计。安装调试,结果证明,线性很好,完全符合设计要求。     

Decadal variability of chlorophyll a in the South China Sea: a possible mechanism

Four climatologies on a monthly scale (January, April, May and November) of chlorophyll a within the South China Sea (SCS) were calculated using a Coastal Zone Color Scanner (CZCS) (1979-1983) and the Sea-viewing Wide Field-of-view Sensor (SeaWiFS) (1998-2002). We analyzed decadal variability of chlorophyll a by comparing the products of the two observation periods. The relationships of variability in chlorophyll a with sea surface wind speed (SSW), sea surface temperature (SST), wind stress (WS), and mixed layer depth (MLD) were determined. The results indicate that there is obvious chlorophyll a decadal variability in the SCS. The decadal chlorophyll a presents distinct seasonal variability in characteristics, which may be as a result of various different dynamic processes. The negative chlorophyll a concentration anomaly in January was associated with the warming of SST and a shallower MLD. Generally, there were higher chlorophyll a concentrations in spring during the SeaWiFS period compared with the CZCS period. However, the chlorophyll a concentration exhibits some regional differences during this season, leading to an explanation being difficult. The deepened MLD may have contributed to the positive chlorophyll a concentration anomalies from the northwestern Luzon Island to the northeastern region of Vietnam during April and May. The increases of chlorophyll a concentration in northwestern Borneo during May may be because the stronger SSW and higher WS produce a deeper mixed layer and convective mixing, leading to high levels of nutrient concentrations. The higher chlorophyll a off southeastern Vietnam may be associated with the advective transport of the colder water extending from the Karimata Strait to southeastern Vietnam.     

一次持续大暴雨过程新一代天气雷达回波特征分析

为探讨西北地区东部的持续大暴雨过程成因及预警指标,利用2010年7月22~23日500~700hPa大气环流背景及天气影响系统和西峰新一代多普勒天气雷达回波资料分析,结果得到:500hPa西太平洋副热带高压外围河套地区环境场的演变高压外围低涡发展及维持,是这次持续性大暴雨过程的大气环流背景和影响天气系统,700hPa强盛的水汽场输送场与汇聚作用为这次持续性大暴雨过程提供了充沛的水汽条件,随着500hPa河套地区低涡-切变辐合系统的准静止维持造成这次持续性大暴雨过程;大暴雨前1.5~9.7km垂直方向上,存在明显的东南风场与西南风场的切变,风向随高度顺转,对应持续的暖平流;天气雷达强度回波反射率因子≥40dBz,暴雨期间维持少变;径向速度回波的水平辐合和气旋性涡旋运动与河套低涡切变天气系统对应一致;垂直液态水含量≥35kg.m2的雨团范围大、持续时间长;云顶回波高度维持在8km以上,对监测预警持续大暴雨天气具有一定指示意义。     

Scattering process of internal waves propagating over a subcritical strait slope onto a shelf region

The scattering process, which means the redistribution of energy fluy in modenumber space, is analyzed for internal waves propagating from the abyssal ocean onto a subcritical strait slope and then a shelf region. In light of Wunsch＇s work, the waves are analytically expressed as superimposition of eigensolutions distribution of energy flux in the shelf region： one is the ratio of water depth in and the other is the ratio of the slope of the internal tide rays to the topographic energy flux distribution： the energy flux is focused around one modenumber or case, the range of modenumbers where energy flux is distributed is narrow. Two parameters have evident effects on the the shelf region to that in the abyssal ocean slope. Generally, there are two patterns of focused around two modenumbers. In any case, the range of modenumbers where energy flux is distributed is narrow.     

Development of a seaweed species-selection index for successful culture in a seaweed-based integrated aquaculture system

Integrated multi-trophic aquaculture (IMTA) has been proposed as a concept that combines the cultivation of fed aquaculture species (e.g., finfish/shrimp) with extractive aquaculture species (e.g., shellfish/seaweed). In seaweed-based integrated aquaculture, seaweeds have the capacity to reduce the environmental impact of nitrogen-rich effluents on coastal ecosystems. Thus, selection of optimal species for such aquaculture is of great importance. The present study aimed to develop a seaweed species-selection index for selecting suitable species in seaweed-based integrated aquaculture system. The index was synthesized using available literature-based information, reference data, and physiological seaweed experiments to identify and prioritize the desired species. Undaria pinnatifida, Porphyra yezoensis and Ulva compressa scored the highest according to a seaweed-based integrated aquaculture suitability index (SASI). Seaweed species with the highest scores were adjudged to fit the integrated aquaculture systems. Despite the application of this model limited by local aquaculture environment, it is considered to be a useful tool for selecting seaweed species in IMTA.