Mapping a Brine Plume Using Surface Geophysical Methods in Conjunction with Ground Water Quality Data

Oil field brine was applied to a gravel roadbed at an instrumented study site in Newark, Ohio, to simulate the use of brine as a deicer on roads in certain areas of Ohio. Brine was applied on a weekly basis eight times during the winter of 1988 as part of the deicing simulation. Eleven wells were installed at the site prior to brine application to permit collection of ground water quality samples. Surface geophysical methods — electrical resistivity and electromagnetic conductivity — were used to map the resulting brine plume. The accuracy of the methods was evaluated by comparing geophysical and ground water quality data. The presence of brine in ground water resulted in a decrease in resistivity and an increase in conductivity. Specific conductance measured in the field was used as a general indicator of the presence of the brine plume in ground water. Chloride concentration was an indicator of brine in the ground water. Results of the surface geophysical surveys correlated best with chloride and dissolved solids concentrations, and with specific conductance in ground water. The surface geophysical methods were found to be useful for qualitative interpretations of ground water quality changes resulting from the application of brine on roads.     

An inter-laboratory comparison of cosmogenic 3He and radiogenic 4He in the CRONUS-P pyroxene standard

This study reports an inter-laboratory comparison of the ³He and ⁴He concentrations measured in the pyroxene material CRONUS-P. This forms part of the CRONUS-Earth and CRONUS-EU programs, which also produced a series of natural reference materials for in situ produced ²⁶Al, ¹⁰Be, ¹⁴C, ²¹Ne and ³⁶Cl.Six laboratories (GFZ Potsdam, Caltech Pasadena, CRPG Nancy, SUERC Glasgow, BGC Berkeley, Lamont New York) participated in this intercomparison experiment, analyzing between 5 and 22 aliquots each. Intra-laboratory results yield ³He concentrations that are consistent with the reported analytical uncertainties, which suggests that ³He is homogeneous within CRONUS-P. The inter-laboratory dataset (66 determinations from the 6 different labs) is characterized by a global weighted mean of (5.02 ± 0.12) × 10⁹ at g⁻¹ with an overdispersion of 5.6% (2σ). ⁴He is characterized by a larger variability than ³He, and by an inter-lab global weighted mean of (3.60 ± 0.18) × 10¹³ at g⁻¹ (2σ) with an overdispersion of 10.4% (2σ).There are, however, some systematic differences between the six laboratories. More precisely, 2 laboratories obtained mean ³He concentrations that are about 6% higher than the clustered other 4 laboratories. This systematic bias is larger than the analytical uncertainty and not related to the CRONUS-P material (see Schaefer et al., 2015). Reasons for these inter-laboratory offsets are difficult to identify but are discussed below. To improve the precision of cosmogenic ³He dating, we suggest that future studies presenting cosmogenic ³He results also report the ³He concentration measured in the CRONUS-P material in the lab(s) used in a given study.     

Geographical Distribution of 3He/4He Ratios in the Chugoku District, Southwestern Japan

We have collected 34 hot spring and mineral spring gases and waters in the Chugoku and Kansai districts, Southwestern Japan and measured the ³He/⁴He and ⁴He/²⁰Ne ratios by using a noble gas mass spectrometer. Observed ³He/⁴He and ⁴He/²⁰Ne ratios range from 0.054 R_atm to 5.04 R_atm (where R_atm is the atmospheric ³He/⁴He ratio of 1.39 × 10⁻⁶) and from 0.25 to 36.8, respectively. They are well explained by a mixing of three components, mantle-derived, radiogenic, and atmospheric helium dissolved in water. The ³He/⁴He ratios corrected for air contamination are low in the frontal arc and high in the volcanic arc regions, which are consistent with data of subduction zones in the literature. The geographical contrast may provide a constraint on the position of the volcanic front in the Chugoku district where it was not well defined by previous works. Taking into account the magma aging effect, we cannot explain the high ³He/⁴He ratios of the volcanic arc region by the slab melting of the subducting Philippine Sea plate. The other source with pristine mantle material may be required. More precisely, the highest and average ³He/⁴He ratios of 5.88 R_atm and 3.8±1.6 R_atm, respectively, in the narrow regions near the volcanic front of the Chugoku district are lower than those in Kyushu and Kinki Spot in Southwestern Japan, but close to those in NE Japan. This suggests that the magma source of the former may be related to the subduction of the Pacific plate, in addition to a slight component of melting of the Philippine Sea slab.     

Mass Discharge in a Tracer Plume: Evaluation of the Theissen Polygon Method

A tracer plume was created within a thin aquifer by injection for 299 d of two adjacent “sub‐plumes” to represent one type of plume heterogeneity encountered in practice. The plume was monitored by snapshot sampling of transects of fully screened wells. The mass injection rate and total mass injected were known. Using all wells in each transect (0.77 m well spacing, 1.4 points/m² sampling density), the Theissen Polygon Method (TPM) yielded apparently accurate mass discharge (M_d) estimates at three transects for 12 snapshots. When applied to hypothetical sparser transects using subsets of the wells with average spacing and sampling density from 1.55 to 5.39 m and 0.70 to 0.20 points/m², respectively, the TPM accuracy depended on well spacing and location of the wells in the hypothesized transect with respect to the sub‐plumes. Potential error was relatively low when the well spacing was less than the widths of the sub‐plumes (>0.35 points/m²). Potential error increased for well spacing similar to or greater than the sub‐plume widths, or when less than 1% of the plume area was sampled. For low density sampling of laterally heterogeneous plumes, small changes in groundwater flow direction can lead to wide fluctuations in M_d estimates by the TPM. However, sampling conducted when flow is known or likely to be in a preferred direction can potentially allow more useful comparisons of M_d over multiyear time frames, such as required for performance evaluation of natural attenuation or engineered remediation systems.     

Helium isotopes in early Iceland plume picrites: Constraints on the composition of high 3He/4He mantle

A detailed study of the geochemistry of a new suite of early Iceland plume picrites shows that extremely high ³He/⁴He ratios (up to 50 R_a) are found in picrites from Baffin Island and West Greenland. High ³He/⁴He picrites display a wide range in ⁸⁷Sr/⁸⁶Sr (0.70288–0.70403), ¹⁴³Nd/¹⁴⁴Nd (0.51288–0.51308) and incompatible trace element ratios (e.g. La/Sm_n = 0.5–1.6). These overlap the complete range of compositions of mid-ocean ridge basalts and most northern hemisphere ocean island basalts, including Iceland. Crustal contamination modelling in which high-grade Proterozoic crustal basement rocks for the region are mixed with a depleted parent cannot account for the trend displayed by the Baffin Island and West Greenland picrites. This rules out the possibility that the incompatible trace element, Sr and Nd isotope range of the high ³He/⁴He picrites is due to crustal contamination. The compositional range at high ³He/⁴He is also inconsistent with derivation from a primordial-He-rich reservoir that is a residue of ancient mantle depletion. This implies that the composition of the high ³He/⁴He mantle cannot be determined simply by extrapolating ocean island basalt He–Sr–Nd–Pb–Os isotope data.The apparent decoupling of He from trace element and lithophile radiogenic isotope tracers is difficult to attain by simple mixing of a high-[He], high ³He/⁴He reservoir with various depleted and enriched He-poor mantle reservoirs. The possibility that primordial He has diffused into a reservoir with a composition typical of convecting upper mantle cannot be ruled out. If so, the process must have occurred after the development of existing mantle heterogeneity, and requires the existence of a deep, primordial He-rich reservoir.     

3H/3He age data in assessing the susceptibility of wells to contamination

Regulatory agencies are becoming increasingly interested in using young-ground water dating techniques, such as the 3H/3He method, in assessing the susceptibility of public supply wells (PSWs) to contamination. However, recent studies emphasize that ground water samples of mixed age may be the norm, particularly from long-screened PSWs, and tracer-based "apparent" ages can differ substantially from actual mean ages for mixed-age samples. We present age and contaminant data from PSWs in Salt Lake Valley, Utah, that demonstrate the utility of 3H and 3He measurements in evaluating well susceptibility, despite potential age mixing. Initial 3H concentrations (measured 3H + measured tritiogenic 3He) are compared to those expected based on the apparent 3H/3He age and the local precipitation 3H record. This comparison is used to determine the amount of modern water (recharged after approximately 1950) vs. prebomb water (recharged before approximately 1950) samples might contain. Concentrations of common contaminants were also measured using detection limits generally lower than those used for regulatory purposes. A clear correlation exists between the potential magnitude of the modern water fraction and both the occurrence and concentration of contaminants. For samples containing dominantly modern water based on their initial 3H concentrations, potential discrepancies between apparent 3H/3He ages and mean ages are explored using synthetic samples that are random mixtures of different modern waters. Apparent ages can exceed mean ages by up to 13 years for these samples, with an exponential age distribution resulting in the greatest discrepancies.     

Anomalous cosmogenic 3He production and elevation scaling in the high Himalaya

The production rate of cosmogenic ³He in apatite, zircon, kyanite and garnet was obtained by cross-calibration against ¹⁰Be in co-existing quartz in glacial moraine boulders from the Nepalese Himalaya. The boulders have ¹⁰Be ages between 6 and 16 kyr and span elevations from 3200 to 4800 m. In all of these minerals ³He correlates with ¹⁰Be and is dominantly cosmogenic in origin. After modest correction for non-cosmogenic components, ³He/¹⁰Be systematics imply apparent sea-level high-latitude (SLHL) apparent production rates for ³He of 226 atoms g^? 1 yr^? 1 in zircon, 254 atoms g^? 1 yr^? 1 in apatite, 177 atoms g^? 1 yr^? 1 in kyanite, and 153 atoms g^? 1 yr^? 1 in garnet. These production rates are unexpectedly high compared with rates measured elsewhere in the world, and also compared with proposed element-specific production rates. For apatite and zircon, the data are sufficient to conclude that the ³He/¹⁰Be ratio increases with elevation. If this reflects different altitudinal scaling between production rates for the two isotopes then the SLHL production rates estimated by our approach are overestimates. We consider several hypotheses to explain these observations, including production of ³He via thermal neutron capture on ⁶Li, altitudinal variations in the energy spectrum of cosmic-ray neutrons, and the effects of snow cover. Because all of these effects are small, we conclude that the altitudinal variations in production rates of cosmogenic ³He and ¹⁰Be are distinct from each other at least at this location over the last ～ 10 kyr. This conclusion calls into question commonly adopted geographic scaling laws for at least some cosmogenic nuclides. If confirmed, this distinction may provide a mechanism by which to obtain paleoelevation estimates.     

Biomass Determination in Some Species Using a Geometric Equivalent Technique of Plankton Organisms

The plankton collected from three fish ponds shows a considerable variability within a pond, between the ponds and in the course of the year. The individual volumes or weights are (minimum—mean—maximum): Gleotrichia echinulata 41–252–879 μg³, Chlorella vulgaris 18–42–94 μm³, Oscillatoria amphigranulata 99–306–827 μm³, Brachionus plicatilis 1–4.918 μg, nauplia 0.5–1.25–2.35 μg, Mesocyclops hyalinus 4–45–369—μg, Heliodiaptomus viduus 41–202–288 μg, Daphnia carinata 186–1468–4578 μg.     

Nitrate Source Identification Using δ15N in a Ground Water Plume Near an Intensive Swine Operation

Nitrate-contaminated ground water beneath and adjacent to an intensive swine ( Sus scrofa domesticus ) production facility in the Middle Coastal Plain of North Carolina was analyzed for δ¹⁵N of nitrate (δ¹⁵N-NO₃). Results show that the isotopic signal of animal waste nitrogen is readily identifiable and traceable in nitrate in this ground water. The widespread land application of animal wastes from intensive livestock operations constitutes a potential source of nitrogen contamination to natural water throughout large regions of the United States and other countries. The site of the present study has been suspected as a nitrate contamination source to nearby domestic supply wells and has been monitored for several years by government and private water quality investigators through sampling of observation wells, ditches, and streams. δ¹⁵N of nitrate allowed direct identification of animal waste-produced nitrate in 11 of 14 wells sampled in this study, as well as recognition of nitrate contributions from non-animal waste agricultural sources in remaining wells.     

Geophysical Discovery of a New LNAPL Plume at the Former Wurtsmith AFB, Oscoda, Michigan

Alight nonaqueous phase liquid (LNAPL) ground water contaminant plume has been discovered by purely geophysical means at the former Wurtsmith Air Force Base (AFB) near Oscoda, Michigan. It is located near another plume called FT-02, which is a well-studied area undergoing natural bioremediation. The plume was discovered by ground penetrating radar (GPR) profiling while extending a long line from FT-02 to establish background variability around that plume. The new plume was apparent because of a high-conductivity "shadow' or GPR reflection attenuation observed below the conductive zone at the top of the aquifer, identical to the pattern observed at the FT-02 plume. Further GPR surveys were conducted by students of a Western Michigan University geophysics field course to outline the proximal part of the plume. The GPR survey was supplemented by an electromagnetic induction (EM) survey which showed a group of four cables crossing the area. Finally, a magnetometer survey was conducted to search for any buried steel objects which might have been missed by the EM survey. The results of the three geophysical surveys were then used by students of a University of Michigan field course to guide subsurface soil and fluid sampling, which verified the presence of residual LNAPL product and ground water with conductivities 2.5 to 3.3 times above background. The plume source is in the vicinity of a vaulted underground storage tank (UST) formerly used for the collection of waste solvents and fuels for subsequent use in the fire training exercises at FT-02. This newly discovered LNAPL plume, along with other "mature' plumes, fits the electrical model which predicts conductive ground water below the decomposing but electrically resistive LNAPLs. Finally, this is a fine example of the cooperative use of a dedicated research site for training by students of two different universities.     

Flow Discharge Modeling in Open Canals Using a New Fuzzy Modeling Technique (SMRGT)

The main goal of this study was to research the answer to two important questions in flow modeling; i) how to optimally design the cross‐section of an open channel for a given flow, and ii) in the case of selecting the fuzzy method for modeling, how to construct the membership functions (MFs) and fuzzy rules (FRs) such that the system yields the best results. The first question is answered in order to minimize difficulties in excavation and related costs by using the appropriate flow velocity. To provide the best answer researchers use several methods. The second question is answered in order to minimize model error. For this aim, there are many algorithms proposed by researchers in the literature. In this paper, the fuzzy logic method was used for open canal flow modeling. Furthermore, a simple membership function and fuzzy rule generation technique (SMRGT) is introduced, and used for fuzzy modeling. Two fuzzy models, each for different cross‐sectional shape, are presented in this study as an application of SMRGT. The comparison depends on various statistics, mean absolute relative error, and contour maps showed that the fuzzy models were successful in open channel flow modeling and SMRGT is useful for MF (membership function) and FR (fuzzy rule) generation.