装设粘弹性阻尼器钢筋混凝土结构抗震实用分析

为了设计装设粘弹性阻尼器受控结构、推进此项技术的工程应用,分别利用粘弹性阻尼器的复刚度模型和有限元模型,编制了振型分解反应谱程序和弹性时程分析程序,并对一装设粘弹性阻尼器的16层钢筋混凝土结构和相应原结构在多遇地震下的响应进行了分析。     

Rigid‐plastic seismic design of reinforced concrete structures

In this paper a new seismic design procedure for Reinforced Concrete (R/C) structures is proposed—the Rigid‐Plastic Seismic Design (RPSD) method. This is a design procedure based on Non‐Linear Time‐ History Analysis (NLTHA) for systems expected to perform in the non‐linear range during a lifetime earthquake event. The theoretical background is the Theory of Plasticity (Rigid‐Plastic Structures). Firstly, a collapse mechanism is chosen and the corresponding stress field is made safe outside the regions where plastic behaviour takes place. It is shown that this allows the determination of the required structural strength with respect to a pre‐defined performance parameter using a rigid‐plastic response spectrum, which is characteristic of the ground motion alone. The maximum strength demand at any point is solely dependent on the intensity of the ground motion, which facilitates the task of distributing required strength throughout the structure. Any artificial considerations intended to adjust results according to empirical observations are avoided, which, from a conceptual point of view, is considered to be an advantage over other simplified design procedures for seismic design. The procedure is formulated using a step‐by‐step format followed by a design example of a 4‐storey‐R/C‐plane‐frame. Results are compared with refined NLTHA and found to be extremely encouraging. Copyright © 2006 John Wiley & Sons, Ltd.     

钢筋混凝土结构的抗震加固方法述评

本文讨论了钢筋混凝土结构抗震加固的原则,对目前常用的钢筋混凝土结构的加固方法进行了简要的论述,给出了各种方法的特点和适用范围以及一些需要注意的问题.文中还提出了加固方法将来可能的发展方向.     

Performance‐based optimum seismic design of reinforced concrete structures

A fully automated design methodology based on nonlinear response history analysis is proposed for the optimum seismic design of reinforced concrete (RC) structures. The conventional trial‐and‐error process is replaced by a structural optimization algorithm that serves as a search engine capable of locating the most efficient design in terms of cost and performance. Two variations of the proposed design methodology are introduced. The first approach treats the optimum design problem in a deterministic manner, while in the second variation the optimum design is sought in the framework of a reliability‐based optimization problem. The reliability‐based approach seems to be a more rational procedure since more meaningful design criteria that correlate better with the performance‐based design concept can be adopted. Thus, the practice of using the mean annual frequency of a limit‐state being exceeded to assess the candidate designs is compared with the use of deterministic criteria. Both formulations take into consideration the structural response for a number of limit‐states, from serviceability to collapse prevention. The proposed design procedure is specifically tailored to the design of RC structures, where a preliminary design step of generating tables of concrete sections is introduced. In order to handle the large size of the tables, the concept of multi‐database cascade optimization is implemented. The final design has to comply with the provisions of European design codes. The proposed methodology allows for a significant reduction of the direct construction cost combined with improved control of the seismic performance under earthquake loading. Copyright © 2008 John Wiley & Sons, Ltd.     

钢骨混凝土结构抗震研究综述

介绍了钢骨混凝土结构的特点以及抗震研究发展现状,指出了这种结构在抗震研究中存在的主要问题和今后需要进一步研究的方向。     

钢筋混凝土渡槽结构地震反应数值分析

首先介绍了钢筋混凝土渡槽结构在地震荷载作用下的分析理论,根据这些理论建立了渡槽结构的动力有限元分析模型,分别采用干模态法、附加质量法和ALE法考虑渡槽结构液固耦合作用,通过具体的工程算例,对钢筋混凝土渡槽结构进行了不同工况下的数值模拟研究,包括混凝土非线性材料分析、渡槽结构静水与动水响应分析、渡槽结构自振特性分析和槽墩的能力曲线分析。研究表明,考虑固液耦合作用的渡槽实体有限元模型能较好地模拟渡槽结构地震反应,并得到相应的渡槽结构地震反应规律。     

钢筋混凝土连梁的抗震性能研究

进行了3个剪跨比等于3．0的钢筋混凝土连梁模型的伪静力试验，结合前一批试验^[1]的部分试验结果，考察了提高配箍参数、降低纵筋配筋率和增加核心钢骨对改善连梁抗震性能的效果。通过与其他学者的试验结果进行比较和分析。建立了连梁破坏位移角的回归计算公式。     

An envelope for Mohr's circle in seismically excited three‐dimensional structures

A previously developed response‐spectrum‐based procedure for computing the envelope that bounds the time‐varying realizations of Mohr's circle at any prescribed location within a two‐dimensional structure is extended for use with three‐dimensional structures subjected to as many as three translational components of ground acceleration. The proposed envelope, which is completely defined by quantities that are routinely used and calculated in conventional response spectrum analyses, is developed for the general case in which the principal directions of the earthquake, along which the ground accelerations are uncorrelated, are unknown. The accuracy of the proposed envelope is evaluated by comparing it to the results of an ensemble of time‐history analyses performed on a concrete arch dam using simulated accelerograms. It is found that the proposed envelope has a level of accuracy that is suitable for structural design and analysis. The largest observed difference between the simulated and predicted mean envelopes is less than 5%. Copyright © 2004 John Wiley & Sons, Ltd.     

Experimental study on the seismic response of braced reinforced concrete frame with irregular columns

A 15-storey K-braced reinforced concrete model frame with irregular columns, i.e., T-shaped, L-shaped, as well as +-shaped columns, was constructed and tested on the six-degree-of-freedom shaking table at the State Key Laboratory for Disaster Reduction in Civil Engineering in Tongji, China. Two types of earthquake records, El-Centro wave (south-north direction) and Shanghai artificial wave (SHAW) with various peak accelerations and principal-secondary sequences, were input and experimentally studied. Based on the shaking table tests and theoretical analysis, several observations can be made. The failure sequence of the model structure is brace→beam→column→joints, so that the design philosophy for several lines of defense has been achieved. Earthquake waves with different spectrums not only influence the magnitude and distribution of the earthquake force and the storey shear force, but also obviously affect the magnitude of the displacement response. The aftershock seismic response of previously damaged reinforced concrete braced frames with irregular columns possesses the equivalent elastic performance characteristic. Generally speaking, from the aspects of failure features and drift ratio, this type of reinforced concrete structure provides adequate earthquake resistance and can be promoted for use in China.     

套建增层预应力钢骨混凝土框架弹塑性地震反应分析

从套建增层改造实践中存在的问题出发,提出了一种新型外套增层结构型式,即以内置H型钢预应力混凝土组合梁为框架梁、以配置4个或8个角钢的角钢混凝土柱为框架柱的套建增层用框架结构,并给出了节点构造。根据不同的场地条件和地震设计分组,对基于现行设计标准设计的跨度为16m的新型套建增层框架进行了罕遇地震作用下的时程分析。分析结果表明,在满足常遇地震作用下的设计要求时,在7度和8度罕遇地震作用下,建造在I、II、III类场地上的部分套建增层框架将会倒塌。根据弹塑性反应分析结果,提出了在罕遇地震作用下避免这种套建增层框架发生倒塌的设计建议。     

钢筋混凝土结构抗震能力评估的简化能力谱方法

本文通过对现有能力谱法的研究,在吸收前人研究成果的基础上,探讨了一种简化的能力谱方法。该方法不是根据需求谱与能力谱有无交点(性能点)为评估依据,而是以能力谱为根据求出不同延性状态下既有建筑物相应的抗震能力,并与需求谱相应的谱加速度比较,判断结构的抗震能力是否满足要求。该方法不需要复杂的迭代计算来求结构的性能点,计算过程简单;同时,可以考虑既有建筑物的老化及损伤。最后,本文应用自行编制的计算程序,通过一个工程实例说明了该方法的应用及其特点。     

Self-centering seismic retrofit scheme for reinforced concrete frame structures: SDOF system study

This paper presents the results of a parametric study of self-centering seismic retrofit schemes for reinforced concrete (RC) frame buildings. The self-centering retrofit system features flag-shaped hysteresis and minimal residual deformation. For comparison purpose,an alternate seismic retrofit scheme that uses a bilinear-hysteresis retrofit system such as buckling-restrained braces (BRB) is also considered in this paper. The parametric study was carried out in a single-degree-of-freedom (SDOF) system framework since a multi-story building structure may be idealized as an equivalent SDOF system and investigation of the performance of this equivalent SDOF system can provide insight into the seismic response of the multi-story building. A peak-oriented hysteresis model which can consider the strength and stiffness degradation is used to describe the hysteretic behavior of RC structures. The parametric study involves two key parameters -the strength ratio and elastic stiffness ratio between the seismic retrofit system and the original RC frame. An ensemble of 172 earthquake ground motion records scaled to the design basis earthquake in California with a probability of exceedance of 10% in 50 years was constructed for the simulation-based parametric study. The effectiveness of the two seismic retrofit schemes considered in this study is evaluated in terms of peak displacement ratio,peak acceleration ratio,energy dissipation demand ratio and residual displacement ratio between the SDOF systems with and without retrofit. It is found from this parametric study that RC structures retrofitted with the self-centering retrofit scheme (SCRS) can achieve a seismic performance level comparable to the bilinear-hysteresis retrofit scheme (BHRS) in terms of peak displacement and energy dissipation demand ratio while having negligible residual displacement after earthquake.     

基于性能的既有钢筋混凝土建筑结构抗震评估与加固技术研究

根据我国现行的建筑结构抗震规范,无论是新建建筑结构的抗震设计还是既有建筑结构的抗震评估与加固,均通过小震弹性承载力计算 抗震延性构造措施来达到"小震不坏、中震可修、大震不倒"的抗震设防目标(对于不规则且具有明显薄弱部位的建筑结构还需要进行罕遇地震作用下的弹塑性层间变形验算)。对于抗震延性构造措施不满足现行规范的既有建筑结构的评估、改建、扩建,如果仅通过小震弹性的承载力计算,显然无法达到"大震不倒"的目标。本文通过引入国际上先进的基于性能的结构抗震思想,以结构层间位移和结构构件变形作为性能目标,从定量上解决了既有钢筋混凝土建筑结构的抗震评估与加固问题。     

Finite element analysis of damage and failure of reinforced concrete members under earthquake loading

This paper presents a three‐dimensional analysis framework, based on the explicit finite element method, for the simulation of reinforced concrete components under cyclic static and dynamic loading. A recently developed triaxial constitutive model for concrete is combined with a material model for reinforcing steel which can account for rupture due to low‐cycle fatigue. The reinforcing bars are represented with geometrically nonlinear beam elements to account for buckling of the reinforcement. The strain penetration effect is also accounted for in the models. The modeling scheme is used in a commercial finite element program and validated with the results of experimental static and dynamic tests on reinforced concrete columns and walls. The analyses are supplemented with a parametric study to investigate the impact of several modeling assumptions on the obtained results.     

预应力混凝土结构非线性地震反应分析

本文针对预应力混凝土与普通混凝土不同的受力特点,提出了适合于分析预应力混凝土结构抗震性能的非线性有限元模型。模型首先将混凝土结构离散为杆单元,然后对各杆单元按分层组合原理分成许多混凝土层、预应力钢筋层和普通钢筋层,计算混凝土分层单元、预应力钢筋和普通钢筋的应力和应变,最后,根据钢筋与混凝土之间的粘结－滑移关系高速钢筋变形,根据混凝土弹性模量调整结构及杆单元变形,通过对普通混凝土构件和三个预应力混凝     

日本钢筋混凝土结构抗震加固技术现状与发展趋势

既有钢筋混凝土结构的丰富而可靠的抗震加固技术是提升我国建筑物抗震性能,实现社会可持续发展的重要保障.在长期工程实践的积累中,日本建筑界逐渐发展出一套行之有效的抗震性能评估、加固设计体系和多种多样的抗震加固技术,值得我国借鉴.文章在简要回顾日本抗震加固设计方法之后,介绍了日本钢筋混凝土结构抗震加固的传统方法,总结了近年来在传统加固方法基础上所做的改良,并在此基础上,从外附子结构、消能减震化和自复位技术等3个方面归纳了日本新一代钢筋混凝土结构抗震加固技术的发展趋势.     

Pseudo‐dynamic seismic response of reinforced concrete frames infilled with non‐structural brick masonry

This paper presents pseudo‐dynamic test results on the in‐plane seismic behaviour of infilled frames. Thirteen single‐storey, single‐bay, half‐size‐scale, reinforced concrete‐frame specimens, most of which infilled with non‐structural masonry made of perforated bricks and cement mortar are tested. The infills are in contact with frames, without any connector; openings are not covered. The frames are different in their strength and details, reinforcement grade, and aspect ratio. Seismic input is the 1976 Tolmezzo (Friuli, Italy) ground acceleration, to which specimens are subjected two times: virgin and damaged by the previous test. The global seismic response of initially virgin infilled specimens considerably differs from that of bare specimens. This follows a dramatic change of properties: compared to a bare frame, the initial stiffness increases by one order of magnitude, and the peak strength more than doubles. The peak drift lessens; however, the displacement ductility demand does not. The energy demand is greater. Nevertheless, the influence of infill decreases as damage proceeds. Displacement time histories of damaged specimens are quite similar. At the local level, infill causes asymmetry and concentration of the frame deformation. Copyright © 2005 John Wiley & Sons, Ltd.     

基于抗震承载力和改进能力谱法的钢筋混凝土结构耐久性设计

钢筋混凝土结构是一种广泛使用的结构形式,其耐久性设计是一个十分迫切需要解决的问题。在一般大气环境下,混凝土碳化和钢筋锈蚀是钢筋混凝土结构耐久性的重要影响因素,在其作用下结构的抗震承载力发生变化,因此可将结构抗震承载力因素引入结构的耐久性设计中。采用改进能力谱法,以罕遇地震下薄弱层的弹塑性层间位移作为结构承载力指标,研究了一般大气环境下钢筋锈蚀因素对钢筋混凝土结构抗震耐久性的影响,提出了基于抗震承载力和改进的能力谱法的钢筋混凝土结构耐久性设计方法。通过一个五层钢筋混凝土结构的算例说明了验算结构抗震性能耐久行的必要性。     

型钢混凝土剪力墙抗震性能影响参数研究

型钢混凝土剪力墙是一种广泛应用于高层混合结构中的剪力墙形式。本文采用通用有限元程序ADINA,以边缘构件含钢率为主要参数,对不同剪跨比的几组剪力墙承载力和变形能力进行了分析,并与考虑了剪力墙混凝土等级、轴压比、配筋率和边缘约束指标等参数影响的剪力墙性能进行了比较研究。结果表明,在高层结构中采用较高强度的混凝土是有利的,但剪力墙的轴压比需要严格限制,且墙体配筋率并不是提高其抗震性能的有效手段。在高层混合结构剪力墙中,通过边缘构件设置型钢可有效增加墙体延性,且边缘约束构件的约束指标可取0.32左右。     

Inelastic response analysis of reinforced concrete structures using modified force analogy method

A modified force analogy method (MFAM) is developed to simulate the nonlinear inelastic response of reinforced concrete (RC) structures. Beam–column elements with three different plastic mechanisms are utilized to simulate inelastic response caused by moment and shear force. A multi‐linear hysteretic model is implemented to simulate the nonlinear inelastic response of RC member. The P‐Δ effect of the structure is also addressed in MFAM. Static and dynamic inelastic response of structure, damage condition and failure type for structural element, structural limit state and collapse time can also be simulated using MFAM. Compared with the general algorithm, the MFAM provides less computational time especially in the case of large structural system. It is also easier to be written as computer program. Three test data groups, which include cyclic loading test data of a non‐ductile RC bridge column, a two‐storey RC frame, and dynamic collapse test data of a non‐ductile RC portal frame, are selected to confirm the effectiveness of applying MFAM to simulate the inelastic behaviour of structures. Copyright © 2007 John Wiley & Sons, Ltd.