Influence of anthropogenic land‐use change on hillslope erosion in the Waipaoa River Basin,New Zealand

European settlement of the Poverty Bay Region resulted in deforestation and conversion of > 90% of the landscape to pastureland. The resulting loss of vegetation triggered a rapid increase in hillslope erosion as widespread landslide complexes and gully systems developed on weak lithologic units in the Waipaoa Basin. To quantify the rate and volume of historic hillslope degradation, we used a 1956–2010 sequence of aerial photographs for a ~16 km² catchment to map temporal changes in the spatial extent of active landslides. Then we created a ‘turf index’ based on the extent and style of pastoral ground disruption, which correlates with downslope velocity. Based on the movement of trees and other features, we assigned average velocities to the turf classes as follows: (1) minimal disrupted ground: 0.6 m/yr, (2) a mix of disrupted ground and intact blocks: 3.4 m/yr, and (3) no intact blocks or vegetation: > 6 m/yr. We then calculated the average annual sediment flux using these turf‐derived velocities, the width of the landslide‐channel intersection, and an average toe depth of 4.4 ± 1.3 m (mean ± standard deviation [SD]) from 37 field measurements. The resulting catchment averaged erosion rates are (mean ± SD): 29.9 ± 12.9 mm/yr (1956), 28.8 ± 13.7 mm/yr (1969), 13.4 ± 4.9 mm/yr (1979), 17.0 ± 6.2 mm/yr (1988), and 9.9 ± 3.6 mm/yr (2010). Compared with long‐term (post‐18 ka) erosion rates (1.6 mm/yr) and the long‐term uplift rate (~1 mm/yr) for this site, the 50‐year anthropogenically‐driven rate is an order of magnitude larger (~20 mm/yr). Previously, we measured an increase in erosion over the past 3.4 kyr (2.2 mm/yr), and here, we demonstrate this increase could be primarily due to human land‐use change – showing that a century of rapid erosion superimposed on the background geologic rate can profoundly skew the interpretation of erosion rates. Copyright © 2016 John Wiley & Sons, Ltd.     

Modelling the relative dominance of wave erosion and weathering processes in shore platform development in micro‐ to mega‐tidal settings

In this paper we use a numerical model to explore the relative dominance of two main processes in shore platform development: wave erosion; weathering due to wetting and drying. The modelling approach differs from previous work in several aspects, including: the way that it accounts for weathering arising from gradual surficial intertidal rock degradation; subtidal profile shape development; and the consideration of a broad erosion parameter space in which, at either end of the erosion spectrum, shore platform profiles are produced by waves or weathering alone. Results show that in micro‐tidal settings, wave erosion dominates the evolution of (i) shore platforms that become largely subtidal and (ii) sub‐horizontal shore platforms that have a receding seaward edge. Weathering processes dominate the evolution of sub‐horizontal shore platforms with a stable seaward edge. In contrast, sloping shore platforms in mega‐tidal settings are produced across the full range of the process‐dominance spectrum depending on the how the erosional efficacy of wave erosion and weathering are parameterized. Morphological feedbacks control the process‐dominance. In small tidal environments wave processes are strongly controlled by the presence/absence of an abrupt seaward edge, but this influence is much smaller in large tidal environments due to larger water depths particularly at high tides. In large tidal environments, similar shore platform profile geometries can be produced by either wave‐dominant or weathering‐dominant process regimes. Equifinality in shore platform development has been noted in other studies, but mainly in the context of smaller‐scale (centimetre to metre) erosion features. Here we draw attention to geomorphic equifinality at the scale of the shore platform itself. Progress requires a greater understanding of the actual mechanics of the process regimes operating on shore platforms. However, this paper makes a substantial contribution to the debate by identifying the physical conditions that allow clear statements about process dominance. © 2018 John Wiley & Sons, Ltd.     

Identifying mechanisms of shore platform erosion using Structure-from-Motion (SfM) photogrammetry

Shore platforms control wave energy transformation which, in turn, controls energy delivery to the cliff toe and nearshore sediment transport. Insight into shore platform erosion rates has conventionally been constrained at millimetre-scales using micro-erosion metres, and at metre-scales using cartographic data. On apparently slowly eroding coasts, such approaches are fundamentally reliant upon long-term observation to capture emergent erosion patterns. Where in practise timescales are short, and where change is either below the resolution or saturates the mode of measurement, the collection of data that enables the identification of the actual mechanisms of erosion is hindered. We developed a method to monitor shore platform erosion at millimetre resolution within metre-scale monitoring plots using Structure-from-Motion photogrammetry. We conducted monthly surveys at 15 0.25 m² sites distributed across the Hartle Loup platform in North Yorkshire, UK, over one year. We derived topographic data at 0.001 m resolution, retaining a vertical precision of change detection of 0.001 m. We captured a mean erosion rate of 0.528 mm yr^-1, but this varied considerably both across the platform and through the year. We characterized the volume and shape of eroded material. The detachment volume–frequency and shape distributions suggest that erosion happens primarily via removal of shale platelets. We identify that the at-a-point erosion rate can be predicted by the distance from the cliff and the tidal level, whereby erosion rates are higher closer to the cliff and at locations of higher tidal duration. The size of individual detachments is controlled by local micro-topography and rock structure, whereby larger detachments are observed on more rough sections of the platform. Faster erosion rates and larger detachments occur in summer months, rather than in more energetic winter conditions. These results have the potential to form the basis of improved models of how platforms erode over both short- and long-timescales. © 2019 John Wiley & Sons, Ltd.     

Short‐term microscale topographic changes of coastal bedrock on shore platforms

We report a series of short‐term (diurnal) rock surface monitoring studies on inter‐ and supra‐tidal shore platforms using a traversing micro‐erosion meter at two sites, Kaikoura Peninsula, New Zealand, and Apollo Bay, Victoria, Australia. Statistically signi?cant day‐to‐day changes were measured. Surface rise and lowering occurred at rates above instrument error, with a maximum range of 3·378 mm between 1·697 mm (lowering) and ‐1·681 mm (rise). Individual measurements showed rises greater than 2 mm. These daily variations reveal that surface lowering and rise occur at a much shorter time scale than previously reported from other studies. The patterns observed suggest wetting and drying is the most likely process causing surface changes at these temporal scales. We argue that traversing micro‐erosion meter studies operating at a short‐term time scale of day‐to‐day provide meaningful results that open new opportunities for studying rock weathering and erosion in a coastal environment. Copyright © 2004 John Wiley & Sons, Ltd.     

10Be‐derived assessment of accelerated erosion in a glacially conditioned inner gorge,Entlebuch, Central Alps of Switzerland

Inner gorges often result from the propagation of erosional waves related to glacial/interglacial climate shifts. However, only few studies have quantified the modern erosional response to this glacial conditioning. Here, we report in situ ¹⁰Be data from the 64 km² Entlen catchment (Swiss Alps). This basin hosts a 7 km long central inner gorge with two tributaries that are >100 m‐deeply incised into thick glacial till and bedrock. The ¹⁰Be concentrations measured at the downstream end of the gorge yield a catchment‐wide erosion rate of 0.42 ± 0.04 mm yr^‐1, while erosion rates are consistently lower upstream of the inner gorge, ranging from 0.14 ± 0.01 mm yr^‐1 to 0.23 ± 0.02 mm yr^‐1. However, ¹⁰Be‐based sediment budget calculations yield rates of ~1.3 mm yr^‐1 for the inner gorge of the trunk stream. Likewise, in the two incised tributary reaches, erosion rates are ~2.0 mm yr^‐1 and ~1.9 mm yr^‐1. Moreover, at the erosional front of the gorge, we measured bedrock incision rates ranging from ~2.5 mm yr^‐1 to ~3.8 mm yr^‐1. These rates, however, are too low to infer a post‐glacial age (15–20 ka) for the gorge initiation. This would require erosion rates that are between 2 and 6 times higher than present‐day estimates. However, the downcutting into unconsolidated glacial till favored high erosion rates through knickzone propagation immediately after the retreat of the LGM glaciers, and subsequent hillslope relaxation led to a progressive decrease in erosion rates. This hypothesis of a two‐ to sixfold decrease in erosion rates does not conflict with the ¹⁰Be‐based erosion rate budgets, because the modern erosional time scale recorded by ¹⁰Be cover the past 2–3 ka only. These results point to the acceleration of Holocene erosion in response to the glacial overprint of the landscape. Copyright © 2012 John Wiley & Sons, Ltd.     

Short‐term rock surface expansion and contraction in the intertidal zone

Transverse micro‐erosion meter (TMEM) stations were installed in rock slabs from shore platforms in eastern Canada. The slabs were put into artificial sea water for 1, 6 or 11 hours, representing high, mid‐ and low tidal areas, respectively. The TMEMs were used to record changes in surface elevation as the rocks dried during the remainder of the 12 h of a semi‐diurnal tidal cycle. A similar technique was used on the same rock types at intertidal TMEM stations in the field, as the rocks dried during low tide. Argillite and basalt surface contraction was from 0 to 0·04 mm: there was little surface expansion. Sandstones contracted by up to 0·03 mm in the field, but there was almost no contraction in the laboratory. Argillite and basalt contraction tended to be greatest in the upper intertidal zone, and to increase with rates of longer‐term surface downwearing, but there was little relationship with rock hardness or air temperature and humidity. Changes in elevation at the same points at TMEM stations in the laboratory and field were quite consistent from one tidal cycle to the next, but there were considerable variations within single tidal cycles between different points within each station. The data suggest that contraction within the elevational zone that is normally submerged twice a day by the tides is by alternate wetting and drying. Short‐term changes in elevation are generally low compared with annual rates of downwearing owing to erosion, but they may generate stresses that contribute to rock breakdown. Copyright © 2007 John Wiley & Sons, Ltd.     

The use of ablation‐dominated medial moraines as samplers for 10Be‐derived erosion rates of glacier valley walls,Kichatna Mountains,AK

We use cosmogenic ¹⁰Be concentrations in amalgamated rock samples from active, ice‐cored medial moraines to constrain glacial valley sidewall backwearing rates in the Kichatna Mountains, Alaska Range, Alaska. This dramatic landscape is carved into a small ～65 Ma granitic pluton about 100 km west of Denali, where kilometer‐tall rock walls and ‘cathedral’ spires tower over a radial array of over a dozen valley glaciers. These supraglacial landforms erode primarily by rockfall, but erosion rates are difficult to determine. We use cosmogenic ¹⁰Be to measure rockwall backwearing rates on timescales of 10³–10⁴ years, with a straightforward sampling strategy that exploits ablation‐dominated medial moraines. A medial moraine and its associated englacial debris serve as a conveyor system, bringing supraglacial rockfall debris from accumulation‐zone valley walls to the moraine crest in the ablation zone. We discuss quantitatively several factors that complicate interpretation of cosmogenic concentrations in this material, including the complex scaling of production rates in very steep terrain, the stochastic nature of the rockfall erosion process, the unmixed nature of the moraine sediment, and additional cosmogenic accumulation during transport of the sediment. We sampled medial moraines on each of three glaciers of different sizes and topographic aspects. All three moraines are sourced in areas with identical rock and similar sidewall relief of ～1 km. Each sample was amalgamated from 25 to 35 clasts collected over a 1‐km longitudinal transect of each moraine. Two of the glaciers yield similar ¹⁰Be concentrations (～1·6–2·2 × 10⁴ at/g) and minimum sidewall slope‐normal erosion rates (～0·5–0·7 mm/yr). The lowest ¹⁰Be concentrations (8 × 10³ at/g) and the highest erosion rates (1·3 mm/yr) come from the largest glacier in the range with the lowest late‐summer snowline. These rates are reasonable in an alpine glacial setting, and are much faster than long‐term exhumation rates of the western Alaska Range as determined by thermochronometric studies. Copyright © 2010 John Wiley & Sons, Ltd.     

Erosion of rocky shore platforms by block detachment from layered stratigraphy

The majority of shore platforms form in rocks that are characterised by layered stratigraphy and pervasive jointing. Plucking of weathered, joint and bed bounded blocks is an important erosion process that existing models of platform development do not represent. Globally, measuring platform erosion rates have focused on microscale (< 1 mm) surface lowering rather than mesoscale (0.1-1 m) block detachment, yet the latter appears to dominate the morphological development of discontinuity rich platforms. Given the sporadic nature of block detachment on platforms, observations of erosion from storm event to multi-decadal timescales (and beyond) are required to quantify shore platform erosion rates. To this end, we collected aerial photography using an unmanned aerial vehicle to produce structure-from-motion-derived digital elevation models and orthophotos. These were combined with historical aerial photographs to characterise and quantify the erosion of two actively eroding stratigraphic layers on a shore platform in Glamorgan, south Wales, UK, over 78-years. We find that volumetric erosion rates vary over two orders of magnitude (0.1-10 m³ yr^-1) and do not scale with the length of the record. Average rates over the full 78-year record are 2-5 m³ yr^-1. These rates are equivalent to 1.2-5.3 mm yr^-1 surface lowering rates, an order of magnitude faster than previously published, both at our site and around the world in similar rock types. We show that meso-scale platform erosion via block detachment processes is a dominant erosion process on shore platforms across seasonal to multi-decadal timescales that have been hitherto under-investigated. © 2019 The Authors. Earth Surface Processes and Landforms published by John Wiley & Sons Ltd     

Rates and patterns of erosion on inter-tidal shore platforms,Kaikoura Peninsula,South Island,New Zealand

This paper presents measured rates of erosion on shore platforms at Kaikoura Peninsula, South Island, New Zealand. Surface lowering rates were measured with a micro-erosion meter and traversing micro-erosion meter. The mean lowering rate for all shore platforms was 1·130 mm a⁻¹. Differences in lowering rates were found between different platform types and lithologies. The rate of surface lowering on Type A (sloping) mudstone platforms was 1·983 mm a⁻¹, and 0·733 mm a⁻¹ on Type B mudstone platforms (subhorizontal). On limestone platforms the lowering rate was 0·875 mm a⁻¹. A previously reported cross-shore pattern of surface lowering rates from Kaikoura was not found. Rates were generally higher on the landward margins and decreased in a seaward direction. Season is shown statistically to influence erosion rates, with higher rates during summer than winter. The interpretation given to this is that the erosive process is subaerial weathering in the form of wetting and drying and salt weathering. This is contrary to views of shore platform development that have favoured marine processes over subaerial weathering. Copyright © 1998 John Wiley & Sons, Ltd.     

Threshold of erosion of submarine bedrock landscapes by tidal currents

Since sea level stabilized 7000 yr bp , shelf seas experiencing semi‐diurnal tides will have been affected by streaming four times per day. If tidal erosion of bedrock were even only marginally efficient, the ~10 million streamings since then should have left geomorphological imprints. We examine high‐resolution multibeam sonar data from three areas with extreme tidal currents. The Minas Passage (Bay of Fundy) experiencing 8‐knot surface tidal currents was surveyed in 2007 with a multibeam sonar. In an area near to transverse dunes, which are evidence for bedload transport, the data show local overhanging surfaces near to the sediment‐rock contact, potentially created by abrasion by saltating particles. However, they are uncommon. In the Straits of Messina, where surface currents reach 10 knots, surveying revealed ridges lying oblique to the flow that are not obviously broken into separate outcrops by erosion. In the Bristol Channel, UK, sonar data collected where currents reach 3·4 knots at 1·5 m above the bed reveal outcrops of limestone with superimposed sand dunes, but only minor rounding of blocks. Holocene tidal currents have apparently been generally ineffective at eroding bedrock. We examine this issue further by compiling extreme tidal streams around the UK and from them estimate shear stresses, representing a macro‐tidal environment where peak surface currents reach 9·7 knots. Those data are compared with shear stresses in mountainous rivers where long‐term rates of erosion are comparable with tectonic uplift rates and are thus geomorphologically significant. Whereas river stresses reach 10²–10³ Pa, the largest tidal stresses are generally 10¹ and only rarely approach 10² Pa, too small for quarrying to operate generally. However, the vertical faces in the Minas Passage may represent the onset of abrasion. Given this limited evidence for abrasion, we explore conditions in the geological past for tides that may have locally eroded bedrock. Copyright © 2012 John Wiley & Sons, Ltd.     

Responses of water erosion to rainfall extremes and vegetation types in a loess semiarid hilly area,NW China

Rainfall extremes (RE) become more variable and stochastic in the context of climate change, increasing uncertainties and risks of water erosion in the real world. Vegetation also plays a key role in soil erosion dynamics. Responses of water erosion to RE and vegetation, however, remain unclear. In this article, on the basis of the data measured on 15 plots (area: 10 m × 10 m and 10 m × 5 m) and the definition of World Meteorological Organization (WMO) on rainfall extremes, 158 natural rainfall events from 1986 to 2005 were analysed, and rain depth and maximal 30‐min intensity (MI₃₀) were used to define RE. Then, water erosion process under RE and five vegetation types (spring wheat, alfalfa, sea buckthorn, Chinese pine, and wheatgrass) were studied in a key loess semiarid hilly area, NW China. The following findings were made: (1) The minimal thresholds of depth and MI₃₀ for defining RE were determined as 40·11 mm and 0·55 mm/min, respectively. Among the studied rainfall events, there were four events with both the variables exceeding the thresholds (REI), five events with depths exceeding 40·11 mm (REII), and four events with MI₃₀ exceeding 0·55 mm/min (REIII). Therefore, not only extreme rainstorm, but also events with lower intensities and long durations were considered as RE. Moreover, RE occurred mostly in July and August, with a probability of 46 and 31%, respectively. (2) Extreme events, especially REI, in general caused severer soil‐water loss. Mean extreme runoff and erosion rates were 2·68 and 53·15 times of mean ordinary rates, respectively. The effect of each event on water erosion, however, becomes uncertain as a result of the variations of RE and vegetation. (3) The buffering capacities of vegetation on RE were generally in the order of sea buckthorn > wheatgrass > Chinese pine > alfalfa > spring wheat. In particular, sea buckthorn reduced runoff and erosion effectively after 3–4 years of plantation. Therefore, to fight against water erosion shrubs like sea buckthorn are strongly recommended as pioneer species in such areas. On the contrary, steep cultivation (spring wheat on slopes), however, should be avoided, because of its high sensitivities to RE. Copyright © 2009 John Wiley & Sons, Ltd.     

The use of RFID in soil‐erosion research

In this paper, we examine the use of radio frequency identification (RFID) tags for studying soil erosion. Surrogate soil particles were created by coating RFID tags with silicone clay and bronze powder to give them an overall density similar to that of quartz particles. The particles were between 2.5 mm and 4.0 mm in diameter and had specific weights of 2.5 to 3.0. These tagged particles were deployed on two plots: first, in a proof‐of‐concept laboratory study and secondly in a field study, the latter involving repeated surveys after rainfall events. Seven surveys under natural rainfall over four months yielded recovery rates averaged 56%. RFIDs are shown to provide useful insights into the movement of individual soil particles during erosion processes. As RFID technology advances, further miniaturization is likely to occur enabling the movement of a greater range of soil particles to be studied, and we may anticipate improvements to the signal detection so that recovery does not rely wholly on visual identification. Copyright © 2014 John Wiley & Sons, Ltd.     

Quantifying periglacial erosion: insights on a glacial sediment budget,Matanuska Glacier,Alaska

Glacial erosion rates are estimated to be among the highest in the world. Few studies have attempted, however, to quantify the flux of sediment from the periglacial landscape to a glacier. Here, erosion rates from the nonglacial landscape above the Matanuska Glacier, Alaska are presented and compare with an 8‐yr record of proglacial suspended sediment yield. Non‐glacial lowering rates range from 1·8 ± 0·5 mm yr^?1 to 8·5 ± 3·4 mm yr^?1 from estimates of rock fall and debris‐flow fan volumes. An average erosion rate of 0·08 ± 0·04 mm yr^?1 from eight convex‐up ridge crests was determined using in situ produced cosmogenic ¹⁰Be. Extrapolating these rates, based on landscape morphometry, to the Matanuska basin (58% ice‐cover), it was found that nonglacial processes account for an annual sediment flux of 2·3 ± 1·0 × 10⁶ t. Suspended sediment data for 8 years and an assumed bedload to estimate the annual sediment yield at the Matanuska terminus to be 2·9 ± 1·0 × 10⁶ t, corresponding to an erosion rate of 1·8 ± 0·6 mm yr^?1: nonglacial sources therefore account for 80 ± 45% of the proglacial yield. A similar set of analyses were used for a small tributary sub‐basin (32% ice‐cover) to determine an erosion rate of 12·1 ± 6·9 mm yr^?1, based on proglacial sediment yield, with the nonglacial sediment flux equal to 10 ± 7% of the proglacial yield. It is suggested that erosion rates by nonglacial processes are similar to inferred subglacial rates, such that the ice‐free regions of a glaciated landscape contribute significantly to the glacial sediment budget. The similar magnitude of nonglacial and glacial rates implies that partially glaciated landscapes will respond rapidly to changes in climate and base level through a rapid nonglacial response to glacially driven incision. Copyright © 2009 John Wiley & Sons, Ltd.     

A 13‐year record of erosion on badland sites in the Karoo,South Africa

Land degradation in South Africa has been of concern for more than 100 years with both climate change and inappropriate land management (overgrazing) being proposed as primary drivers. However, there are few quantitative studies of degradation and, in particular, few of erosion by water. Badlands, taken here to be the landform which results from extreme erosion, have been notably neglected. We report on 13 consecutive years of erosion pin measurements of badland erosion on 10 study sites in the Sneeuberg uplands of the eastern Karoo in South Africa. The study sites are on Holocene colluvium which mantles footslopes. They have been subject to overgrazing for at least 100 years, c. 1850–1950. Currently they are lightly grazed by sheep. The area receives about 500 mm rainfall per year. The sites are remote, with only informal, farmer‐operated, daily raingauges nearby. The nearest sub‐daily raingauge is c. 55 km distant. Also we report on an analysis of the erosion pin data which focuses on establishing the origins and context of the badlands, including the relationship between study sites and adjacent valley‐bottom gully systems; compare erosion rates on our study sites with rates determined by erosion pins on other badland sites; and discuss the implications of these erosion rates for landscape development and off‐site impacts. Net erosion rates on the study sites are relatively high compared with global badland rates and range from 3.1 to 8.5 mm yr^‐1 which may be extrapolated to 53 to 145 t ha yr^‐1 (using a measured bulk density of 1.7 g cm^‐3). However, comparisons with badland sites elsewhere are difficult because of different measuring methodologies, lithologies, climate and dominant processes. Erosion rates on the study sites are strongly influenced by rainfall amounts and, in particular, by daily rainfall events which exceed ~10 mm: this is the threshold intensity at which runoff has been observed to commence on badlands. Of significance, but of lesser influence, is weathering, mainly by wetting and drying: this prepares bare surfaces for erosion. However, questions remain regarding the role of site characteristics, and of processes at each site, in determining between‐site differences in erosion rate. Crude extrapolation of current rates of erosion, in conjunction with depths of incision into the badlands, suggests that badland development started around 200 years ago, probably as a response to the introduction of European‐style stock farming which resulted in overgrazing. We assume, but cannot quantify, the additional influence of periods of drought and burning in the erosional history of the area. Intermittent connection of these badlands to valley‐bottom gullies and therefore to small farm dams and ultimately to large water storage reservoirs increases their impact on local water resources. Copyright © 2015 John Wiley & Sons, Ltd.     

Supra‐glacial deposition and flux of catastrophic rock–slope failure debris,south‐central Alaska

The ongoing debate over the effects of global environmental change on Earth's cryosphere calls for detailed knowledge about process rates and their variability in cold environments. In this context, appraisals of the coupling between glacier dynamics and para‐glacial erosion rates in tectonically active mountains remain rare. We contribute to filling this knowledge gap and present an unprecedented regional‐scale inventory of supra‐glacial sediment flux and hillslope erosion rates inferred from an analysis of 123 large (> 0·1 km²) catastrophic bedrock landslides that fell onto glaciers in the Chugach Mountains, Alaska, as documented by satellite images obtained between 1972 to 2008. Assuming these supra‐glacial landslide deposits to be passive strain markers we infer minimum decadal‐scale sediment yields of 190 to 7400 t km^–2 yr^–1 for a given glacier‐surface cross‐section impacted by episodic rock–slope failure. These rates compare to reported fluvial sediment yields in many mountain rivers, but are an order of magnitude below the extreme sediment yields measured at the snouts of Alaskan glaciers, indicating that the bulk of debris discharged derives from en‐glacial, sub‐glacial or ice‐proximal sources. We estimate an average minimum para‐glacial erosion rate by large, episodic rock–slope failures at 0·5–0·7 mm yr^–1 in the Chugach Mountains over a 50‐yr period, with earthquakes likely being responsible for up to 73% of this rate. Though ranking amongst the highest decadal landslide erosion rates for this size of study area worldwide, our inferred rates of hillslope erosion in the Chugach Mountains remain an order of magnitude below the pace of extremely rapid glacial sediment export and glacio‐isostatic surface uplift previously reported from the region. Copyright © 2012 John Wiley & Sons, Ltd.     

Very slow erosion rates and landscape preservation across the southwestern slope of the Ladakh Range,India

Erosion rates are key to quantifying the timescales over which different topographic and geomorphic domains develop in mountain landscapes. Geomorphic and terrestrial cosmogenic nuclide (TCN) methods were used to determine erosion rates of the arid, tectonically quiescent Ladakh Range, northern India. Five different geomorphic domains are identified and erosion rates are determined for three of the domains using TCN ¹⁰Be concentrations. Along the range divide between 5600 and 5700 m above sea level (asl), bedrock tors in the periglacial domain are eroding at 5.0 ± 0.5 to 13.1 ± 1.2 meters per million years (m/m.y.)., principally by frost shattering. At lower elevation in the unglaciated domain, erosion rates for tributary catchments vary between 0.8 ± 0.1 and 2.0 ± 0.3 m/m.y. Bedrock along interfluvial ridge crests between 3900 and 5100 m asl that separate these tributary catchments yield erosion rates <0.7 ± 0.1 m/m.y. and the dominant form of bedrock erosion is chemical weathering and grusification. Erosion rates are fastest where glaciers conditioned hillslopes above 5100 m asl by over‐steepening slopes and glacial debris is being evacuated by the fluvial network. For range divide tors, the long‐term duration of the erosion rate is considered to be 40–120 ky. By evaluating measured ¹⁰Be concentrations in tors along a model ¹⁰Be production curve, an average of ~24 cm is lost instantaneously every ~40 ky. Small (<4 km²) unglaciated tributary catchments and their interfluve bedrock have received very little precipitation since ~300 ka and the long‐term duration of their erosion rates is 300–750 ky and >850 ky, respectively. These results highlight the persistence of very slow erosion in different geomorphic domains across the southwestern slope of the Ladakh Range, which on the scale of the orogen records spatial changes in the locus of deformation and the development of an orogenic rain shadow north of the Greater Himalaya. Copyright © 2014 John Wiley & Sons, Ltd.     

Variability in erosion rates related to the state of landscape transience in the semi‐arid Chilean Andes

We quantify erosion rates in the higher sectors of the Huasco Valley, in the Main Cordillera of the semi‐arid Andes of Chile, using elevation differences between three successive geomorphic markers (pediments and paleo‐valleys) and the present day valley. Available Ar‐Ar ages of Neogene pediments are used to estimate mean erosion rates for the three periods (16 to 13 My, 13 to 8 My, and following 8 My). The landscape of the Huasco Valley is in a transient state, as indicated by well‐preserved pediment surfaces in interfluves, valleys deeply incised by fluvial and glacial erosion and scarped head‐valleys that represent the current knickzones. Higher erosion rates (45–75 m/My) are calculated for the more recent period (< 8 My) during which deep incision developed compared to previous periods (6–31 m/My). Quantitative data indicate that glaciers had a much higher erosional capability than fluvial activity in the higher sectors of the Main Cordillera. Comparison with erosion rates calculated in other drainage basins of the Chilean Andes suggests that the variability of erosion rates depends on the landscape's transient erosive state. The landscape's geomorphologic response to the uplift of the Main Cordillera results in the retreat of a knickzone, for which retreat velocity depends on precipitation rate pattern and glacial erosion intensity. Copyright © 2011 John Wiley & Sons, Ltd.     

Bank erosion of an incised upland channel by subaerial processes: Tasmania,Australia

The headwaters of many rivers are characterized by gullies and incised streams that generate significant volumes of sediment and degrade downstream water quality. These systems are characterized by harsh climates, ephemeral flows that do not reach bank top, and bare cohesive banks of clay and weathered bedrock. We investigated the rates and processes of bank erosion in an incised canal that has such characteristics. Detailed measurements of bank position were made over two years with a purpose‐built groundprofiler and photo‐electronic erosion pins (PEEPs). Stage height and turbidity were also monitored. The bare banks eroded at 13 ± 2 mm a⁻¹. Erosion is controlled by subaerial processes that loosen bank material. Observations show that needle‐ice growth is important in winter and desiccation of clays predominates in summer. Flows are unable to erode firm cohesive clays from the banks, and erosion is generally limited by the availability of loosened material. This produces strong hysteresis in turbidity during events. Peak turbidity is related to the number of days with low flow between events, and not peak stage. Rehabilitation with a moderate cover of grass is able to prevent bank erosion by limiting the subaerial erosion processes. Projections of current erosion suggest that without vegetation cover the banks are unlikely to stabilize for many years. Copyright © 2000 John Wiley & Sons, Ltd.     

Natural recovery from accelerated forest ditch and stream bank erosion five years after harvesting of plantation forest on Plynlimon,mid‐Wales

Erosion rates surveyed using 230 erosion pins on 24 occasions over eight years (1994–2001) on forested stream banks, tributaries and forest ditches in the 0·89 km² Nant Tanllwyth catchment, part of the Hafren Forest on Plynlimon, mid‐Wales, showed statistically significant increases of up to 40 mm a^?1 in mean erosion rates during the two‐year period in which environmentally sensitive plot‐scale timber harvesting operations took place (1996–97). In the four years following timber harvesting mean erosion rates at all sites recovered to levels that were lower than before the harvesting operations began. This is attributed to increased light levels, following canopy removal, allowing vegetation to colonize exposed banks. There was a statistically significant relationship (p < 0·05) between mean erosion rate in 2000–01 (four years after harvesting) and percentage vegetation cover at erosion monitoring sites in the clearfelled (south tributaries) area though the same relationship did not hold for sites on the mainstream banks or for sites on the north (mature forest) ditch sites. The implications of natural vegetation colonization for management of such streams are discussed. Copyright © 2005 John Wiley & Sons, Ltd.