Patterns of surface downwearing on shore platforms in eastern Canada

Downwearing rates were measured on shore platforms at about 200 transverse micro‐erosion meter (TMEM) stations, over periods ranging from 2 to 6 years. There were seven study areas in eastern Canada. The platforms were surveyed and a Schmidt Rock Test Hammer was used to measure rock hardness. More than 1200 rock samples from three of the study areas were also subjected each day, over a 3 year period, to two tidal cycles of immersion and exposure, which simulated the central intertidal zone. A further 840 samples were subjected to longer periods of exposure and immersion, over a 1 year period, which represented different elevations within the upper and lower intertidal zone, respectively. These experiments suggested that tidally generated weathering and debris removal is an effective erosional mechanism, particularly at the elevation of the lowest high tides. In the field, mean rates of downwearing for each study area ranged from 0·24 mm yr^?1 to more than 1·5 mm yr^?1. Rates tended to increase with elevation in the field, with maxima in the upper intertidal zone. This trend in the field cannot be attributed entirely to the tidally induced weathering processes that were simulated in the laboratory, and must reflect, in part, the effect of waves, frost, ice, and other mechanisms. It is concluded that there are no strong spatial downwearing patterns on shore platforms, and that downwearing rates in the intertidal zone are the result of a number of erosional mechanisms with different elevation‐efficacy characteristics. Furthermore, even if only one or two mechanisms were dominant in an area, any resulting relationship between downwearing rates and elevation would be obscured or eliminated by the effect of variations in the chemical and physical characteristics of the rocks. Copyright © 2010 John Wiley & Sons, Ltd.     

Erosion of rocky shore platforms by block detachment from layered stratigraphy

The majority of shore platforms form in rocks that are characterised by layered stratigraphy and pervasive jointing. Plucking of weathered, joint and bed bounded blocks is an important erosion process that existing models of platform development do not represent. Globally, measuring platform erosion rates have focused on microscale (< 1 mm) surface lowering rather than mesoscale (0.1-1 m) block detachment, yet the latter appears to dominate the morphological development of discontinuity rich platforms. Given the sporadic nature of block detachment on platforms, observations of erosion from storm event to multi-decadal timescales (and beyond) are required to quantify shore platform erosion rates. To this end, we collected aerial photography using an unmanned aerial vehicle to produce structure-from-motion-derived digital elevation models and orthophotos. These were combined with historical aerial photographs to characterise and quantify the erosion of two actively eroding stratigraphic layers on a shore platform in Glamorgan, south Wales, UK, over 78-years. We find that volumetric erosion rates vary over two orders of magnitude (0.1-10 m³ yr^-1) and do not scale with the length of the record. Average rates over the full 78-year record are 2-5 m³ yr^-1. These rates are equivalent to 1.2-5.3 mm yr^-1 surface lowering rates, an order of magnitude faster than previously published, both at our site and around the world in similar rock types. We show that meso-scale platform erosion via block detachment processes is a dominant erosion process on shore platforms across seasonal to multi-decadal timescales that have been hitherto under-investigated. © 2019 The Authors. Earth Surface Processes and Landforms published by John Wiley & Sons Ltd     

A device for measuring downwearing rates on cohesive shore platforms

The device described in this paper, known as the traversing erosion beam, is believed to be the first to be designed specifically for measuring rates of downwearing of cohesive foreshores, such as clay shore platforms, under high‐energy wave conditions. It is primarily constructed of Flexlink Aluminium Structural System components and consists of a horizontal beam with a main leg and two further support legs. A sliding ‘dolly’ module is moved along the beam at precise intervals using a longitudinal scale as a reference. The topographic profile of the measurement surface is transferred to the dolly by a vertical sliding steel alloy rod, from which the relative height differences are measured by a separate engineer's digital height gauge placed on the dolly. The main leg of the device fits into a marine grade stainless steel box, which is deeply embedded into the foreshore or shore platform to act a permanent datum. The box is robust and can be expected to have a lifetime of at least a year, and possibly even five years or more. Sample data are provided from a clay shore platform at Warden Point in the Isle of Sheppey, Kent (UK), which demonstrate that the TEB can provide information on seasonal as well as annual rates of downwearing. The device has also been tested successfully on a peat and clay foreshore at Pett Level in Sussex and on a shore platform cut in glacial till at Easington, Yorkshire. Copyright © 2007 John Wiley & Sons, Ltd.     

Rates and patterns of erosion on inter-tidal shore platforms,Kaikoura Peninsula,South Island,New Zealand

This paper presents measured rates of erosion on shore platforms at Kaikoura Peninsula, South Island, New Zealand. Surface lowering rates were measured with a micro-erosion meter and traversing micro-erosion meter. The mean lowering rate for all shore platforms was 1·130 mm a⁻¹. Differences in lowering rates were found between different platform types and lithologies. The rate of surface lowering on Type A (sloping) mudstone platforms was 1·983 mm a⁻¹, and 0·733 mm a⁻¹ on Type B mudstone platforms (subhorizontal). On limestone platforms the lowering rate was 0·875 mm a⁻¹. A previously reported cross-shore pattern of surface lowering rates from Kaikoura was not found. Rates were generally higher on the landward margins and decreased in a seaward direction. Season is shown statistically to influence erosion rates, with higher rates during summer than winter. The interpretation given to this is that the erosive process is subaerial weathering in the form of wetting and drying and salt weathering. This is contrary to views of shore platform development that have favoured marine processes over subaerial weathering. Copyright © 1998 John Wiley & Sons, Ltd.     

Lacustrine shore platforms at Lake Waikaremoana,North Island,New Zealand

This paper examines the morphology and processes governing the development of shore platforms at Lake Waikaremoana, North Island, New Zealand. Shore platforms at Lake Waikaremoana are recent features, and were formed when a new sequence of shoreline development was initiated, due to lowering of the lake by 5 m in 1946 for hydroelectric power development. Three predominant platform morphologies were identified around the lake. These include gently sloping platforms (c.1·5 to 3·9°), ramp platforms (c.6·8 to 9·2°), and concave ramp platforms (c.7·9 to 12°). Platform widths ranged from 11 to 31 m, with the gently sloping platforms characterized by the widest morphologies. Erosion rates were estimated using perched sandstone boulders and were found to range from 3·4 to 12·5 mm a^?1, with a mean erosion rate of 5·9 mm a^?1. Higher rates of erosion were identified at lower platform elevations, due to a greater frequency of wetting and drying cycles coincident with storm waves, while lower erosion rates were identified at higher elevations. Field evidence suggests that shore platforms at Lake Waikaremoana were likely initiated and continue to develop as a result of subaerial wetting and drying cycles. Waves, coincident with fluctuating lake levels, play an important role by removing the weathered material from the platforms, and appear to control the width of the platforms. A conceptual model of platform development is presented, and analogies are drawn between this model, and the formation of shore platforms in oceanic environments. Copyright © 2002 John Wiley & Sons, Ltd.     

Short‐term microscale topographic changes of coastal bedrock on shore platforms

We report a series of short‐term (diurnal) rock surface monitoring studies on inter‐ and supra‐tidal shore platforms using a traversing micro‐erosion meter at two sites, Kaikoura Peninsula, New Zealand, and Apollo Bay, Victoria, Australia. Statistically signi?cant day‐to‐day changes were measured. Surface rise and lowering occurred at rates above instrument error, with a maximum range of 3·378 mm between 1·697 mm (lowering) and ‐1·681 mm (rise). Individual measurements showed rises greater than 2 mm. These daily variations reveal that surface lowering and rise occur at a much shorter time scale than previously reported from other studies. The patterns observed suggest wetting and drying is the most likely process causing surface changes at these temporal scales. We argue that traversing micro‐erosion meter studies operating at a short‐term time scale of day‐to‐day provide meaningful results that open new opportunities for studying rock weathering and erosion in a coastal environment. Copyright © 2004 John Wiley & Sons, Ltd.     

Assessing soil erosion rates in cultivated areas of Navarre (Spain)

Although there is much evidence of intense soil erosion in cultivated areas of Navarre (Spain), information on it is currently scarce. Rill and ephemeral gully volumes can be used as a guide to minimum erosion rates. With the main purpose of determining the annual soil loss rates in cultivated areas of central Navarre, a detailed assessment of rainfall and of rill and gully erosion was made in 19 small catchments from October 1999 to September 2001. Seventeen of them were randomly selected, and were cultivated with winter cereals, vineyards or sunflowers. The other two catchments were selected to represent partially uncultivated lands abandoned for ten years. Channel cross‐sections were measured by using a 1‐m‐wide micro‐topographic profile meter, describing 632 cross‐sections and processing information from 31 600 pins. Erosive events happened every year in the three study areas. For cereal catchments, soil losses occurred in only one or two rainfall events each year, usually at the end of autumn and in some summers, with high erosion rates (0·20–11·50 kg m^?2 a^?1). In vineyards, soil losses occurred several times per year, and in any season. This is attributed to the small percentage of surface covered by the crop throughout the year. Again, high erosion rates were found (0·33–16·19 kg m^?2 a^?1), with ephemeral gully erosion causing more loss than rill erosion. No‐till is proposed as an effective conservation measure. From this large data set, it can be stated that rill erosion and ephemeral gully erosion are widespread in Mediterranean regions, and that much more attention should be paid to the problem. Abandoned fields showed very high erosion rates (16·19 kg m^?2 a^?1 on average), suggesting that the abandonment of marginal lands without implementing any erosion control can lead to severe erosion rates. Copyright © 2005 John Wiley & Sons, Ltd.     

Gully erosion in the Siwalik Hills,Nepal: estimation of sediment production from active ephemeral gullies

A simple field‐based monitoring programme was established in a small catchment (area 4·6 km²) to find the rates of gully erosion in the Siwalik Hills, Nepal. The rates are used to estimate the amount of sediment produced by gully erosion in the catchment. Three large and active gullies were selected with areas ranging from 0·44 to 0·78 ha. Aerial photographs taken in 1964, 1978 and 1992 were ortho‐rectified and used to study the dynamics of gully heads. The same gullies were also monitored manually using an orthogonal reference system fixed by erosion pins around the gully heads. Results from the aerial photos indicated that the gullies expanded remarkably over the period from 1964 to 1992, by 34 to 58 per cent. Head‐retreat rates during that period were 0·48, 0·55 and 0·73 m a^?1 and average annual sediment evacuation was estimated as 2534 ± 171, 959 ± 60 and 2783 ± 118 m³ a^?1 for the three gullies respectively. From the field measurement, estimated volumes were found to vary from 731 ± 57 to 2793 ± 201 m³ a^?1 over the monitoring period of two years. It was also found that the gullies produce sediment which accounts for up to 59 per cent of the sediment produced from surface erosion in the headwater catchment. The findings are useful for planning and executing appropriate control measures and constructing a sediment hazard map at the catchment scale. Copyright © 2006 John Wiley & Sons, Ltd.     

Plot‐scale measurement of soil erosion at the experimental area of Sparacia (southern Italy)

Obtaining good quality soil loss data from plots requires knowledge of the factors that affect natural and measurement data variability and of the erosion processes that occur on plots of different sizes. Data variability was investigated in southern Italy by collecting runoff and soil loss from four universal soil‐loss equation (USLE) plots of 176 m², 20 ‘large’ microplots (0·16 m²) and 40 ‘small’ microplots (0·04 m²). For the four most erosive events (event erosivity index, R_e ≥ 139 MJ mm ha^?1 h^?1), mean soil loss from the USLE plots was significantly correlated with R_e. Variability of soil loss measurements from microplots was five to ten times greater than that of runoff measurements. Doubling the linear size of the microplots reduced mean runoff and soil loss measurements by a factor of 2·6–2·8 and increased data variability. Using sieved soil instead of natural soil increased runoff and soil loss by a factor of 1·3–1·5. Interrill erosion was a minor part (0·1–7·1%) of rill plus interrill erosion. The developed analysis showed that the USLE scheme was usable to predict mean soil loss at plot scale in Mediterranean areas. A microplot of 0·04 m² could be used in practice to obtain field measurements of interrill soil erodibility in areas having steep slopes. Copyright © 2003 John Wiley & Sons, Ltd.     

Field observations of infragravity waves and their behaviour on rock shore platforms

Infragravity wave (IGW) transformation was quantified from field measurements on two shore platforms on New Zealand's east coast, making this the first study to describe the presence, characteristics and behaviour of IGWs on rock platform coasts. Data was collected using a cross‐shore array of pressure transducers during a 22 hour experiment on Oraka shore platform and a 36 hour experiment at Rothesay Bay shore platform. A low pass Fourier filter was used to remove gravity wave frequency oscillations, allowing separate analysis of IGWs and the full wave spectrum. Offshore IGW heights were measured to be 7 cm (Oraka) and 9 cm (Rothesay Bay), which were 21% (Oraka) and 7.5% (Rothesay Bay) the height of incident wave height. At the cliff toe, significant IGW height averaged 15 cm at Oraka and 13 cm at Rothesay Bay. This increase in IGW height over the platform during both experiments is attributed to shoaling of 40 to 55% over the last 50–60 m before the cliff toe, respectively. Shoaling across the platform was quantified as the change in IGW height from the platform edge to cliff toe, resulting in a maximum increase of 1·88 and 2·63 on Rothesay Bay and Oraka platforms. IGW height at the cliff toe showed a strong correlation with incident wave height. The proportional increase in IGW height shows a strong correlation to water level on each platform. The rate of shoaling of long period waves on the shallow, horizontal platforms increased at higher water levels resulting in a super elevation in water level at the cliff toe during high tide. Greater IGW shoaling was also observed on the wider (Oraka) shore platform. Results from this study show the first measurements of IGWs on shore platforms and identify long wave motion a significant process in a morphodynamic understanding of rock coast. Copyright © 2011 John Wiley & Sons, Ltd.     

Identifying mechanisms of shore platform erosion using Structure-from-Motion (SfM) photogrammetry

Shore platforms control wave energy transformation which, in turn, controls energy delivery to the cliff toe and nearshore sediment transport. Insight into shore platform erosion rates has conventionally been constrained at millimetre-scales using micro-erosion metres, and at metre-scales using cartographic data. On apparently slowly eroding coasts, such approaches are fundamentally reliant upon long-term observation to capture emergent erosion patterns. Where in practise timescales are short, and where change is either below the resolution or saturates the mode of measurement, the collection of data that enables the identification of the actual mechanisms of erosion is hindered. We developed a method to monitor shore platform erosion at millimetre resolution within metre-scale monitoring plots using Structure-from-Motion photogrammetry. We conducted monthly surveys at 15 0.25 m² sites distributed across the Hartle Loup platform in North Yorkshire, UK, over one year. We derived topographic data at 0.001 m resolution, retaining a vertical precision of change detection of 0.001 m. We captured a mean erosion rate of 0.528 mm yr^-1, but this varied considerably both across the platform and through the year. We characterized the volume and shape of eroded material. The detachment volume–frequency and shape distributions suggest that erosion happens primarily via removal of shale platelets. We identify that the at-a-point erosion rate can be predicted by the distance from the cliff and the tidal level, whereby erosion rates are higher closer to the cliff and at locations of higher tidal duration. The size of individual detachments is controlled by local micro-topography and rock structure, whereby larger detachments are observed on more rough sections of the platform. Faster erosion rates and larger detachments occur in summer months, rather than in more energetic winter conditions. These results have the potential to form the basis of improved models of how platforms erode over both short- and long-timescales. © 2019 John Wiley & Sons, Ltd.     

Rates of tafoni weathering on uplifted shore platforms in Nojima-Zaki,Boso Peninsula,Japan

Many tafoni occur on the faces of marine cliffs on three uplifted shore platforms with different altitudes and with known ages of emergence. The mean value of the ten largest depths of tafoni, D (cm), was obtained and the period of their formation, t (years), was estimated. The relationship between the two variables was found to be D = 20·3 × (1?e^?0.005t).     

The influence of alongshore and cross‐shore wave energy flux on large‐ and small‐scale coastal erosion patterns

A strong low‐pressure system traveled along the Japanese main island Honshu in October 2006. High waves and storm surge attacked the Kashima Coast resulting in huge erosion over the area. Airborne laser data measured in October 2005 and November 2006 were analyzed to estimate cross‐sectional changes within the subaerial zone. The results of the alongshore distribution of the changes of cross‐sectional area indicate that the amount of erosion of the 38 km‐long northern and 15 km‐long southern parts decreased toward the south in each part and that the amount of erosion was smaller in protected areas with artificial headlands than in unprotected areas. The local alongshore variation of the erosion and accretion patterns showed wavy fluctuations of several hundreds of meters. The total amounts of the estimated eroded volume of the subaerial zone over the northern and southern parts were 620 000 m³ and 600 000 m³, respectively. The Simulating Waves Nearshore (SWAN) wave model was applied to estimate wave conditions along the coast during the storm. The computational results were verified, and then the alongshore distribution of wave energies, expressed as the alongshore and cross‐shore components of the wave energy flux, was compared with the alongshore distribution of cross‐sectional change. The results show that the distribution of energy flux explains the distribution of erosion well: The alongshore variability in the cross‐shore energy flux is responsible for the large‐scale variability in erosion, and shorter‐scale variability is due to gradients in the alongshore energy fluxes, especially for the areas without coastal works. Copyright © 2011 John Wiley & Sons, Ltd.     

Modelling the Quaternary evolution of shore platforms and erosional continental shelves

A mathematical model was used to investigate the effect of glacially induced fluctuations in sea level on the evolution of wave‐cut shore platforms and erosional continental shelves during the Quaternary. The model used two deep‐water wave sets, which were used to calculate breaker height and depth, and the force of the waves at the waterline, according to the width and bottom roughness of the surf zone and the gradient of the submarine slope. The model also incorporated an erosional threshold related to the strength of the rocks, the number of hours each year in which the water level is at each intertidal elevation and the amount and persistence of the debris at the cliff foot. Most runs were made using a sea level model that consisted of 26 glacial cycles from 2 million to 0·9 million years ago, and nine, of approximately twice the amplitude and wavelength, in the last 0·9 million years. The model emphasized the dynamic association between the contemporary intertidal platform and the continental shelf. Both surfaces trend towards a state of static equilibrium under oscillating sea level conditions, when attenuated waves are unable to continue eroding the rock. If there has not been enough time to reduce the gradient of the shallower portions of the continental shelf, however, intertidal shore platforms can be in a temporary, though possibly long‐lasting, state of dynamic equilibrium. The model suggests that most platforms are, at least in part, inherited from one, or in many cases more, interglacial stages when sea level was similar to today's. Copyright © 2001 John Wiley & Sons, Ltd.     

Modern sediment yield compared to geologic rates of sediment production in a semi‐arid basin,New Mexico: assessing the human impact

An Erratum has been published for this article in Earth Surface Processes and Landforms 29(13) 2004, 1707. In the semi‐arid Arroyo Chavez basin of New Mexico, a 2·28 km² sub‐basin of the Rio Puerco, we contrasted short‐term rates (3 years) of sediment yield measured with sediment traps and dams with long‐term, geologic rates (～10 000 years) of sediment production measured using ¹⁰Be. Examination of erosion rates at different time‐scales provides the opportunity to contrast the human impact on erosion with background or geologic rates of sediment production. Arroyo Chavez is grazed and we were interested in whether differences in erosion rates observed at the two time‐scales are due to grazing. The geologic rate of sediment production, 0·27 kg m^?2 a^?1 is similar to the modern sediment yields measured for geomorphic surfaces including colluvial slopes, gently sloping hillslopes, and the mesa top which ranged from 0·12 to 1·03 kg m^?2 a^?1. The differences between modern sediment yield and geologic rates of sediment production were most noticeable for the alluvial valley ?oor, which had modern sediment yields as high as 3·35 kg m^?2 a^?1. The hydraulic state of the arroyo determines whether the alluvial valley ?oor is aggrading or degrading. Arroyo Chavez is incised and the alluvial valley ?oor is gullied and piped and is a source of sediment. The alluvial valley ?oor is also the portion of the basin most modi?ed by human disturbance including grazing and gas pipeline activity, both of which serve to increase erosion rates. Copyright © 2004 John Wiley & Sons, Ltd.     

Short‐term rock surface expansion and contraction in the intertidal zone

Transverse micro‐erosion meter (TMEM) stations were installed in rock slabs from shore platforms in eastern Canada. The slabs were put into artificial sea water for 1, 6 or 11 hours, representing high, mid‐ and low tidal areas, respectively. The TMEMs were used to record changes in surface elevation as the rocks dried during the remainder of the 12 h of a semi‐diurnal tidal cycle. A similar technique was used on the same rock types at intertidal TMEM stations in the field, as the rocks dried during low tide. Argillite and basalt surface contraction was from 0 to 0·04 mm: there was little surface expansion. Sandstones contracted by up to 0·03 mm in the field, but there was almost no contraction in the laboratory. Argillite and basalt contraction tended to be greatest in the upper intertidal zone, and to increase with rates of longer‐term surface downwearing, but there was little relationship with rock hardness or air temperature and humidity. Changes in elevation at the same points at TMEM stations in the laboratory and field were quite consistent from one tidal cycle to the next, but there were considerable variations within single tidal cycles between different points within each station. The data suggest that contraction within the elevational zone that is normally submerged twice a day by the tides is by alternate wetting and drying. Short‐term changes in elevation are generally low compared with annual rates of downwearing owing to erosion, but they may generate stresses that contribute to rock breakdown. Copyright © 2007 John Wiley & Sons, Ltd.     

Late‐Holocene buried forests on the Oregon Coast

Deposits of late‐Holocene beach sand buried conifer forests episodically emerge on beaches of the Oregon coast. Simultaneously, sand dunes buried late‐Holocene forests growing on marine terraces landward of the beaches. Dune ramps, up to 60 m in elevation, connected the beach and dune deposits. The average age of wood samples from stumps rooted on the shore platforms is 3·07 ± 1·45 ka. The average age of wood and charcoal samples embedded in forest soil on the marine terraces is 3·27 ± 1·46 ka. Between 1994 and 2006, winter storm waves exposed more than 4·5 km² of late‐Holocene forest soil on shore platforms at 19 localities. Rooted stumps without soil were uncovered at an additional 14 localities. Once exposed, wave action eroded the soil rapidly (one to two years). The intact forest soil and roots on the shore platforms must have been nearly continuously buried, protected and preserved prior to recent exposure. The late‐Holocene buried forest provides the basis for a conceptual model of coastal evolution. A three stage reversal of erosion and sand supply must have occurred: (1) wave erosion switched to seaward advancement of forests, (2) forest growth and soil development switched to burial beneath beach and dune sand and (3) burial and preservation switched to wave erosion, truncation of dune ramps and landward retreat of sea cliffs. Copyright © 2006 John Wiley & Sons, Ltd.     

Shore platform morphology on a rapidly uplifting coast,Wellington, New Zealand

The coast of Wellington, New Zealand, is tectonically active and contains a series of uplifted and contemporary shore platforms that are developed in Triassic Greywacke. The platform profiles are rugged with relief of metre scale common. The surveyed platforms were formed at, and at two distinct levels 1–1·5 and 2–2·5 m above, mean sea level. They range in width up to 70 m and are highly fractured with fracture densities in excess of 20[sol ]m² common. The rate of development of these platforms is rapid, with lateral erosion rates of up to 0·15 m[sol ]yr calculated, allowing platform development to occur over centennial scales. Even given this rapid development, continued instantaneous uplift of the coast has meant they are unable to reach an equilibrium state, whereby the effectiveness of wave processes in removing material is reduced by platform extension. The co‐seismic uplift means that the rear of the platforms is raised beyond the limits of marine process and has become an area of deposition. Although no direct process measurements were made the highly fractured nature of the bedrock appears to play a major role in platform evolution, with wave processes being easily able to pluck blocks as evidenced by fresh erosion scars and active gravel beaches at the rear of many platforms. This coast therefore represents an extremely dynamic youthful shore platform environment, where the processes of marine abrasion can be observed over historical timescales. Copyright © 2005 John Wiley & Sons, Ltd.     

Bedrock erosion and relief production in the northern Flinders Ranges,Australia

Cosmogenic ¹⁰Be concentrations in exposed bedrock surfaces and alluvial sediment in the northern Flinders Ranges reveal surprisingly high erosion rates for a supposedly ancient and stable landscape. Bedrock erosion rates increase with decreasing elevation in the Yudnamutana Catchment, from summit surfaces (13·96 ± 1·29 and 14·38 ± 1·40 m Myr^?1), to hillslopes (17·61 ± 2·21 to 29·24 ± 4·38 m Myr^?1), to valley bottoms (53·19 ± 7·26 to 227·95 ± 21·39 m Myr^?1), indicating late Quaternary increases to topographic relief. Minimum cliff retreat rates (9·30 ± 3·60 to 24·54 ± 8·53 m Myr^?1) indicate that even the most resistant parts of cliff faces have undergone significant late Quaternary erosion. However, erosion rates from visibly weathered and varnished tors protruding from steep bedrock hillslopes (4·17 ± 0·42 to 14·00 ± 1·97 m Myr^?1) indicate that bedrock may locally weather at rates equivalent to, or even slower than, summit surfaces. ¹⁰Be concentrations in contemporary alluvial sediment indicate catchment‐averaged erosion at a rate dominated by more rapid erosion (22·79 ± 2·78 m Myr^?1), consistent with an average rate from individual hillslope point measurements. Late Cenozoic relief production in the Yudnamutana Catchment resulted from (1) tectonic uplift at rates of 30–160 m Myr^?1 due to range‐front reverse faulting, which maintained steep river gradients and uplifted summit surfaces, and (2) climate change, which episodically increased both in situ bedrock weathering rates and frequency–magnitude distributions of large magnitude floods, leading to increased incision rates. These results provide quantitative evidence that the Australian landscape is, in places, considerably more dynamic than commonly perceived. Copyright © 2006 John Wiley & Sons, Ltd.     

Measurement and prediction of sediment production from unpaved roads,St John,US Virgin Islands

Excess delivery of land‐based sediments is an important control on the overall condition of nearshore coral reef ecosystems. Unpaved roads have been identified as a dominant sediment source on St John in the US Virgin Islands. An improved understanding of road sediment production rates is needed to guide future development and erosion control efforts. The main objectives of this study were to: (1) measure sediment production rates at the road segment scale; (2) evaluate the importance of precipitation, slope, contributing area, traffic, and grading on road sediment production; (3) develop an empirical road erosion predictive model; and (4) compare our measured erosion rates to other published data. Sediment production from 21 road segments was monitored with sediment traps from July 1998 to November 2001. The selected road segments had varying slopes, contributing areas, and traffic loads. Precipitation was measured by four recording rain gauges. Sediment production was related to total precipitation and road segment slope. After normalizing by precipitation and slope, the mean sediment production rate for roads that had been graded within the last two years was 0·96 kg m^?2 cm^?1 m m^?1 or approximately 11 kg m^?2 a^?1 for a typical road with a 10 per cent slope and an annual rainfall of 115 cm a^?1. The mean erosion rate for ungraded roads was 42 per cent lower, or 0·56 kg m^?2 cm^?1 m m^?1. The normalized mean sediment production rate for road segments that had been abandoned for over fifteen years was only about 10 per cent of the mean value for ungraded roads. Sediment production was not related to traffic loads. Multiple regression analysis led to the development of an empirical model based on precipitation, slope to the 1·5 power, and a categorical grading variable. The measured and predicted erosion rates indicate that roads are capable of increasing hillslope‐scale sediment production rates by up to four orders of magnitude relative to undisturbed conditions. The values from St John are at the high end of reported road erosion rates, a finding that is consistent with the high rainfall erosivities and steep slopes of many of the unpaved roads on St John. Other than paving, the most practical methods to reduce current erosion rates are to minimize the frequency of grading and improve road drainage. Copyright © 2005 John Wiley & Sons, Ltd.