Mid-Quaternary decoupling of sediment routing in the Nankai Forearc revealed by provenance analysis of turbiditic sands

Coring during Integrated Ocean Drilling Program Expeditions 315, 316, and 333 recovered turbiditic sands from the forearc Kumano Basin (Site C0002), a Quaternary slope basin (Site C0018), and uplifted trench wedge (Site C0006) along the Kumano Transect of the Nankai Trough accretionary wedge offshore of southwest Japan. The compositions of the submarine turbiditic sands here are investigated in terms of bulk and heavy mineral modal compositions to identify their provenance and dispersal mechanisms, as they may reflect changes in regional tectonics during the past ca. 1.5 Myrs. The results show a marked change in the detrital signature and heavy mineral composition in the forearc and slope basin facies around 1 Ma. This sudden change is interpreted to reflect a major change in the sand provenance, rather than heavy mineral dissolution and/or diagenetic effects, in response to changing tectonics and sedimentation patterns. In the trench-slope basin, the sands older than 1 Ma were probably eroded from the exposed Cretaceous–Tertiary accretionary complex of the Shimanto Belt and transported via the former course of the Tenryu submarine canyon system, which today enters the Nankai Trough northeast of the study area. In contrast, the high abundance of volcanic lithics and volcanic heavy mineral suites of the sands younger than 1 Ma points to a strong volcanic component of sediment derived from the Izu-Honshu collision zones and probably funnelled to this site through the Suruga Canyon. However, sands in the forearc basin show persistent presence of blue sodic amphiboles across the 1 Ma boundary, indicating continuous flux of sediments from the Kumano/Kinokawa River. This implies that the sands in the older turbidites were transported by transverse flow down the slope. The slope basin facies then switched to reflect longitudinal flow around 1 Ma, when the turbiditic sand tapped a volcanic provenance in the Izu-Honshu collision zone, while the sediments transported transversely became confined in the Kumano Basin. Therefore, the change in the depositional systems around 1 Ma is a manifestation of the decoupling of the sediment routing pattern from transverse to long-distance axial flow in response to forearc high uplift along the megasplay fault.     

Potential collapse of the upper slope and tsunami generation on the Great Barrier Reef margin, north-eastern Australia

Analysis of high-resolution multibeam bathymetry and seismic profiles in the Noggin Passage region, north-eastern Australia, has identified a small area (Noggin block) in the upper-slope offshore Cairns that may potentially collapse and generate a tsunami wave. The Noggin block extends from 340 to 470 m depth covering a roughly circular (2.4 km long and 3.7 km wide) area of about 5.3 km². The well-defined margins of the block correspond to different bounding seabed features. These features include steep headscarps, small landslides and a group of aligned circular pockforms up to 500 m wide and 20 m deep. Slope stability simulations indicate that the Noggin block is stable under normal present-day gravitational conditions on the upper slope. However, block failure may result under external loads, such as those produced by earthquakes. Failure modelling shows that critical peak horizontal accelerations of 0.2–0.4 g could lead to the collapse of the Noggin block. In north-eastern Australia, these acceleration values would involve earthquakes generated at short hypocentral distances and short periods. The collapse of the potential sediment slide mass of about 0.86 km³ (162 m average thickness) may lead to the formation of a landslide-generated tsunami wave. Semi-empirical equations indicate the collapse of this mass would yield a 7–11-m high three-dimensional tsunami wave. These waves could reach an estimated run-up height at the coast of 5–7 m. Our first-order approach highlights the potential consequences for nearby coastal communities, the need for better sediment characterisation in the study area, and the systematic identification of other areas prone to slope failures along the Great Barrier Reef margin.     

Physical criteria for distinguishing sandy tsunami and storm deposits using modern examples

Modern subaerial sand beds deposited by major tsunamis and hurricanes were compared at trench, transect, and sub-regional spatial scales to evaluate which attributes are most useful for distinguishing the two types of deposits. Physical criteria that may be diagnostic include: sediment composition, textures and grading, types and organization of stratification, thickness, geometry, and landscape conformity.

Published reports of Pacific Ocean tsunami impacts and our field observations suggest that sandy tsunami deposits are generally < 25 cm thick, extend hundreds of meters inland from the beach, and fill microtopography but generally conform to the antecedent landscape. They commonly are a single homogeneous bed that is normally graded overall, or that consists of only a few thin layers. Mud intraclasts and mud laminae within the deposit are strong evidence of tsunami deposition. Twig orientation or other indicators of return flow during bed aggradation are also diagnostic of tsunami deposits. Sandy storm deposits tend to be > 30 cm thick, generally extend < 300 m from the beach, and will not advance beyond the antecedent macrotopography they are able to fill. They typically are composed of numerous subhorizontal planar laminae organized into multiple laminasets that are normally or inversely graded, they do not contain internal mud laminae and rarely contain mud intraclasts. Application of these distinguishing characteristics depends on their preservation potential and any deposit modifications that accompany burial.

The distinctions between tsunami and storm deposits are related to differences in the hydrodynamics and sediment-sorting processes during transport. Tsunami deposition results from a few high-velocity, long-period waves that entrain sediment from the shoreface, beach, and landward erosion zone. Tsunamis can have flow depths greater than 10 m, transport sediment primarily in suspension, and distribute the load over a broad region where sediment falls out of suspension when flow decelerates. In contrast, storm inundation generally is gradual and prolonged, consisting of many waves that erode beaches and dunes with no significant overland return flow until after the main flooding. Storm flow depths are commonly < 3 m, sediment is transported primarily as bed load by traction, and the load is deposited within a zone relatively close to the beach.     

Characterization of the 26 December 2004 tsunami deposits in Andaman Islands (Bay of Bengal, India)

The large tsunami, which was generated by an earthquake on 26 December 2004, affected most of the countries around the Indian Ocean. A total of 48 tsunamigenic surface sediments and nine core samples have been collected from various coastal geomorphological features such as beaches, estuaries/creeks and mangrove areas in the Andaman Islands. These samples were analysed for textural analysis and geochemical studies to evaluate effects of the tsunami on sediment contamination. The studied sediments, deposited by the 26 December 2004 tsunami in Andaman group of islands, belong to poorly sorted, coarse to medium sands. Generally the concentration of heavy metals in the tsunamigenic surface sediments is mainly in the order of Cu > Mn > Fe > Zn > Pb during the post-tsunami (2005) and Cu > Fe > Mn > Zn > Pb during the post-monsoon (2008). The analysed core samples show that tsunami sediments have been preserved at certain depths from the sampling locations and indicate that they were derived from shallow littoral to neritic depths. The approximate width of deposits deposited by the 26 December 2004 Tsunami in Diglipur and Mayabandar areas (North Andaman) is ~10 cm, in Rangat and Baratang (Middle Andaman) the thickness of the deposits is ~15 cm. In Chidiyatapu, Junglighat, Rutland Islands and Havelock Island (South Andaman) the thickness of the deposits is ~30, ~8, ~25 and ~5 cm, respectively, and in Hut Bay (Little Andaman) the thickness of the deposits is about ~15 cm.     

A study on pre- and post-tsunami shallow deposits off SE coast of India from the 2004 Indian Ocean tsunami: a geochemical approach

A study was made on samples from one core collected immediately after the December 2004 Asian tsunami to know the geochemical nature of the offshore tsunami sediments. The core sample was analyzed for sediment grain size, CaCO₃, organic carbon (OC) and major elements (SiO₂, TiO₂, Al₂O₃, Fe₂O₃, CaO, MgO, Na₂O, K₂O, P₂O₅, MnO). The results indicate that the core sample can be divided into two parts: (1) upper 0–25 cm, interpreted to be deposited after tsunami (AT), and (2) lower 25–45 cm, interpreted as before tsunami (BT) as evidenced by the sandy nature AT with fluctuating CaCO₃ contents. The AT part is devoid of OC suggesting that the sediment could have been transported to deeper regions along with the finer particles. Major elements such as SiO₂, TiO₂, CaO indicate high values than the other elements in AT part than in the BT part. The BT part contains Al rich alluvium mud associated with finer mud and organic particles. An analysis of the correlation matrix indicates the possible source of elements and transport of heavy minerals in the AT part than the BT part. The overall results suggest that the sediments could possibly have two different origins.     

Maritime tsunami evacuation guidelines for the Pacific Northwest coast of Oregon

Recent tsunamis affecting the West Coast of the USA have resulted in significant damage to ports and harbors, as well as to recreational and commercial vessels attempting to escape the tsunami. With the completion of tsunami inundation simulations for a distant tsunami originating from the Aleutian Islands and a locally generated tsunami on the Cascadia subduction zone (CSZ), the State of Oregon is now able to provide guidance on the magnitudes and directions of the simulated currents for the Oregon coast and shelf region. Our analyses indicate that first wave arrivals for an Aleutian Island event would take place on the north coast,?~?3 h 40 min after the start of the earthquake,?~?20 min later on the southern Oregon coast. The simulations demonstrated significant along-coast variability in both the tsunamis water levels and currents, caused by localized bathymetric effects (e.g., submarine banks and reefs). A locally generated CSZ event would reach the open coast within 7–13 min; maximum inundation occurs at?~?30–40 min. As the tsunami current velocities increase, the potential for damage in ports and harbors correspondingly increases, while also affecting a vessels ability to maintain control out on the ocean. Scientific consensus suggests that tsunami currents?<?1.54 m/s are unlikely to impact maritime safety in ports and harbors. No such guidance is available for boats operating on the ocean, though studies undertaken in Japan suggest that velocities in the region of 1–2 m/s may be damaging to boats. In addition to the effects of currents, there is the added potential for wave amplification of locally generated wind waves interacting with opposing tsunami currents in the offshore. Our analyses explore potential wave amplification effects for a range of generic sea states, ultimately producing a nomogram of wave amplification for a range of wave and opposing current conditions. These data will be useful for US Coast Guard and Port authorities as they evaluate maritime tsunami evacuation options for the Oregon coast. Finally, we identify three regions of hazard (high, moderate, and low) across the Oregon shelf, which can be used to help guide final designation of tsunami maritime evacuation zones for the coast.     

Reconstruction of Recent Sedimentary Processes in a Carbonate Platform (Gulf of Batabano,Cuba) Using Environmental Radiotracers

Recent (past 100 years) sedimentary processes in the highly dynamic Gulf of Batabano (Cuba, Caribbean Sea) were investigated through the analyses of environmental radionuclides (e.g., ²¹⁰Pb, ²²⁶Ra, ¹³⁷Cs, ^239,240Pu, and ¹⁴C) in nine sediment cores. We evaluated the mean mass accumulation rates (MARs) and the surface mixed layers (SMLs) in each sediment core. Based on these results, three sedimentary environments were identified in the study region. In the central zone, the sediments were mainly composed of carbonate transported from the southern area and showed elevated mass accumulation rates (MAR, 0.11–0.23 g cm^?2 year^?1) and relatively deep surface mixed layers (SML, 14–16 cm). The southwestern zone was characterized by lower MAR (0.05–0.08 g cm^?2 year^?1) and thinner SML (7–8 cm). In both areas, the long sediment mixing times in the SMLs (of 45–61 years) smoothed out the sedimentary records. The coastline sedimentary environments were characterized by higher MAR (0.30–0.57 g cm^?2 year^?1) and the sedimentary records displayed clear signatures of extreme climatic events such as the intensive rains in 1999 reported for La Coloma and the hurricanes Lili and Isodore in 2002. Our study shows that the application of the ²¹⁰Pb sediment dating method in dynamic costal zones is a challenging task but still may provide important information regarding sedimentation and mixing processes in the ecosystem.     

Identification of tsunami deposits considering the tsunami waveform: An example of subaqueous tsunami deposits in Holocene shallow bay on southern Boso Peninsula, Central Japan

This study proposes a tsunami depositional model based on observations of emerged Holocene tsunami deposits in outcrops located in eastern Japan. The model is also applicable to the identification of other deposits, such as those laid down by storms. The tsunami deposits described were formed in a small bay of 10–20-m water depth, and are mainly composed of sand and gravel. They show various sedimentary structures, including hummocky cross-stratification (HCS) and inverse and normal grading. Although, individually, the sedimentary structures are similar to those commonly found in storm deposits, the combination of vertical stacking in the tsunami deposits makes a unique pattern. This vertical stacking of internal structures is due to the waveform of the source tsunamis, reflecting: 1) extremely long wavelengths and wave period, and 2) temporal changes of wave sizes from the beginning to end of the tsunamis.

The tsunami deposits display many sub-layers with scoured and graded structures. Each sub-layer, especially in sandy facies, is characterized by HCS and inverse and normal grading that are the result of deposition from prolonged high-energy sediment flows. The vertical stack of sub-layers shows incremental deposition from the repeated sediment flows. Mud drapes cover the sub-layers and indicate the existence of flow-velocity stagnant stages between each sediment flow. Current reversals within the sub-layers indicate the repeated occurrence of the up- and return-flows.

The tsunami deposits are vertically divided into four depositional units, Tna to Tnd in ascending order, reflecting the temporal change of wave sizes in the tsunami wave trains. Unit Tna is relatively fine-grained and indicative of small tsunami waves during the early stage of the tsunami. Unit Tnb is a protruding coarse-grained and thickest-stratified division and is the result of a relatively large wave group during the middle stage of the tsunami. Unit Tnc is a fine alternation of thin sand sheets and mud drapes, deposited from waning waves during the later stage of the tsunami. Unit Tnd is deposited during the final stage of the tsunami and is composed mainly of suspension fallout. Cyclic build up of these sub-layers and depositional units cannot be explained by storm waves with short wave periods of several to ten seconds common in small bays.     

Foraminiferal record of the postglacial (Holocene) marine transgression and subsequent regression,northern Spencer Gulf,South Australia

Core SG120 recovered 3.65 m of Quaternary sediment from a northern, shallow-water environment of Spencer Gulf, a marine embayment into the southern continental margin of Australia. Previous investigations had revealed that the upper interval 0 – 148 cm is Holocene marine bioclastic sediment, and that the lower Late Pleistocene interval 250 – 365 cm, with its carbonate palaeosol, had a similar marine origin. However, the age and origin of the interval 148 – 250 cm remained subject to ambiguous interpretation. Re-examination of core SG120, employing detailed foraminiferal analysis, has revealed that this middle unit records the earliest sedimentation associated with the postglacial marine transgression into the northern gulf. These basal Holocene sediments, which incorporated broken, corroded and carbonate-encrusted tests from the underlying palaeosol, together with tests of more pristine appearance, were deposited in a shallow-water, seagrass sandflat environment similar to those in coastal settings of the modern gulf. The lithological change at 148 cm has therefore been reinterpreted as a facies change related to increasing water depth. Radiocarbon analyses of fossil molluscs support this interpretation and reveal that marine transgression, at the site of SG120, was initiated prior to 8600 y cal BP. Selected species of foraminifers (Nubecularia lucifuga, Massilina milletti, Peneroplis planatus, Discorbis dimidiatus, Elphidium crispum and E. macelliforme) together reveal a consistent record of the final stages of the transgression with maximum water depth indicated at a core depth of 90 cm. Subsequent regression, which has been attributed to the combined effects of hydroisostatic uplift and sediment aggradation, is equally recorded by the foraminiferal assemblages.     

Climate and environmental changes over the past 150 years inferred from the sediments of Chaiwopu Lake, central Tianshan Mountains, northwest China

We used a 55-cm sediment core from shallow Chaiwopu Lake in the central Tianshan Mountains of Xinjiang, northwest China, to investigate climate and environmental changes in this arid region over the past ~150 years. The core was dated using ¹³⁷Cs. We compared temporal changes in several sediment variables with recent meteorological and tree-ring records. Organic matter had a positive correlation with the Palmer Drought Severity Index in the central Tianshan Mountains, and the δ¹³C of organic matter had a positive correlation with regional temperature. We applied constrained incremental sum-of-squares cluster analysis to element concentrations in the core and identified three distinct zones: (1) 55–46 cm, ~1860–1910, (2) 46–26 cm, ~1910–1952, and (3) 26–0 cm, 1952–present. Between 1880 and 1910 AD, following the Little Ice Age (LIA), the sediment environment was relatively stable, climate was cold and dry, and the lake water displayed high salinity, in contrast to conditions during the LIA. During the LIA, westerlies carried more water vapor into Central Asia when the North Atlantic Oscillation was in a negative phase, and encountered the enhanced Siberia High, which probably led to increased precipitation. In the period 1910–1950 AD, the lake was shallow and the regional climate was unstable, with high temperatures and humidity. In the last ~15–20 years, human activities caused an increase in sediment magnetic susceptibility, and heavy metal and total phosphorus concentrations in the sediment were substantially enriched. Mean annual temperature displays a warming trend over the past 50 years, and the lowest temperature was observed in the 1950s. There has been an increase in annual total precipitation since the 1990s. The combined influences of climate and human activity on the lake environment during this period were faithfully recorded in sediments of Chaiwopu Lake. This study provides a scientific basis for environmental management and protection.     

Tsunami sedimentary facies deposited by the Storegga tsunami in shallow marine basins and coastal lakes, western Norway

Sedimentary successions in small coastal lakes situated from 0 to 11 m above the 7000 year BP shoreline along the western coast of Norway, contain a distinctive deposit, very different from the sediments above and below. The deposit is interpreted to be the result of a tsunami inundating the coastal lakes. An erosional unconformity underlies the tsunami facies and is traced throughout the basins, with most erosion found at the seaward portion of the lakes. The lowermost tsunami facies is a graded or massive sand that locally contains marine fossils. The sand thins and decreases in grain size in a landward direction. Above follows coarse organic detritus with rip-up clasts, here termed ‘organic conglomerate’, and finer organic detritus. The tsunami unit generally fines and thins upwards. The higher basins (6–11 m above the 7000 year shoreline) show one sand bed, whereas basins closer to the sea level 7000 years ago, may show several sand beds separated by organic detritus. These alternations in the lower basins may reflect repeated waves of sea water entering the lakes. In basins that were some few metres below sea level at 7000 years BP, the tsunami deposit is more minerogenic and commonly present as graded sand beds, but also in some of these shallow marine basins organic-rich facies occur between the sand beds. The total thickness of the tsunami deposit is 20–100 cm in most studied sites. An erosional and depositional model of the tsunami facies is developed.     

Sedimentology of a lacustrine fan-delta system, Miocene Horse Camp Formation, Nevada, USA

A 1600-m-thick succession of the Miocene Horse Camp Formation (Member 2) exposed in east-central Nevada records predominantly terrigenous clastic deposition in subaerial and subaqueous fan-delta environments and nearshore and offshore lacustrine environments. These four depositional environments are distinguished by particular associations of individual facies (14 defined facies). Subaerial and subaqueous fan-delta facies associations include: ungraded, matrix-and clast-supported conglomerate; normally graded, matrix- and clast-supported conglomerate; ungraded and normally graded sandstone; and massive to poorly laminated mudstone. Subaqueous fan-delta deposits typically have dewatering structures, distorted bedding and interbedded mudstone. The subaerial fan-delta environment was characterized by debris flows, hyperconcentrated flows and minor sheetfloods; the subaqueous fan-delta environment by debris flows, high- and low-density turbidity currents, and suspension fallout. The nearshore lacustrine facies association provides examples of deposits and processes rarely documented in lacustrine environments. High-energy oscillatory wave currents, probably related to a large fetch, reworked grains as large as 2 cm into horizontally stratified sand and gravel. Offshore-directed currents produced uncommonly large (typically 1–2 m thick) trough cross-stratified sandstone. In addition, stromatolitic carbonate interbedded with stratified coarse sandstone and conglomerate suggests a dynamic environment characterized by episodic terrigenous clastic deposition under high-energy conditions alternating with periods of carbonate precipitation under reduced energy conditions. Massive and normally graded sandstone and massive to poorly laminated mudstone characterize the offshore lacustrine facies association and record deposition by turbidity currents and suspension fallout. A depositional model constructed for the Horse Camp Formation (Member 2) precludes the existence of all four depositional environments at any particular time. Rather, phases characterized by deposition in subaerial fan, nearshore lacustrine and offshore lacustrine environments alternated with phases of subaerial fan-delta, subaqueous fan-delta and offshore lacustrine deposition. This model suggests that high-energy nearshore currents due to deep water along the lake margin reworked sediment of the fan edge, thus preventing development of a subaqueous fan-delta environment and promoting development of a well-defined nearshore lacustrine environment. Low-energy nearshore currents induced by shallow water along the     

Influence of friction on erosion and accretion processes in the Yavaros Bay,Gulf of California

A two-dimensional, vertically integrated, nonlinear numerical model was applied to investigate the tide-driven bed load transport of sediments and morphodynamics in the shallow coastal lagoon of Yavaros, located in the southeastern part of the Gulf of California, Mexico. Satellite imagery exposes strong sediment dynamics in this coastal region. The dynamics in the lagoon were forced by 13 tidal constituents at the open boundary. Tides are of a mixed character and they are predominantly semidiurnal. The calculations showed areas of intense tidal currents and considerable water exchange with the Gulf of California. Numerical experiments revealed an ebb-dominant tidal distortion and a net export of sediment from the lagoon to the Gulf of California. A simulation of 20 years showed that the lagoon exported about 1,600 m³ of sediment; however, the daily oscillating exchange of sediment reached values of around 8 m³. The daily averaged flux of export–import sediments oscillates principally with semiannual, monthly and fortnightly periods. By applying a threshold velocity, a variable friction coefficient and the calculated amplitude of tidal velocities, it was possible to determine that morphological changes occur in zones of sharp topographic gradients and to explain the effect of friction on the export–import process of sediments. A 10-year simulation revealed that accumulation of sediment (~20 cm) occurred in small areas, whereas erosion occurred in larger areas but with less intensity (~8 cm). Besides the importance for the morphodynamics, these kinds of erosion–accretion processes may be relevant for the marine ecology.     

Depositional environment in and around Tamiraparani estuary,and off Tuticorin,Tamil Nadu,India: clues from grain size studies

The sediments of the estuaries and offshore Tuticorin along the southern coast of Tamil Nadu were studied for their textural variation. Ninety sediment samples were collected from three sectors (river, estuary, offshore) on the basis of prevailing energy conditions and oceanographic parameters. Frequency curves show unimodal to bimodal in nature. Offshore samples also fall in bimodal with medium and fine sand where sediment is additionally deposited by the Tamiraparani River. The mean values ranging from 1.69 to 2.01 φ with medium to fine sand. The fine sand in the riverine region indicates the depositional nature of the sediments. In pre-monsoon, the standard deviation ranges from 0.29 to 0.81 φ, which falls in the very well sorted to moderately well sorted. Estuary ranges from 0.63 to 1.30 φ, with moderately sorted, whereas in the marine sediments ranges from 0.4 to 1.01 φ, with moderately to moderately well- sorted and some patches of poorly sorted is observed. In both monsoons, the grain size variations are mostly influenced in river and offshore samples compared to the estuaries. The CM pattern indicates the deposition of sediments in graded suspension. In estuary, the sediments are medium sand with moderately to poorly sorted, fine skewed which are indicative of denudation processes taking place there. In marine, the sediments are medium-to-fine, moderately-to-well sorted, and fine skewed to very fine skewed sediments, probably as a result of the influence of palaeo-sediments deposited by rivers from inland as well as by waves and currents from offshore. Further, the marine samples also highlight depositional processes.     

Indirect economic losses of drought under future projections of climate change: a case study for Spain

This study presents the results of numerical simulations of the 2004 Indian Ocean earthquake and tsunami in the Bay of Lhok Nga (northwestern coast of Sumatra, Indonesia) integrating sediment erosion and deposition. We investigate the transport of sediment both by suspension and by bedload under different scenarii of long breaking dispersive waves through a series of numerical experiments. The earthquake source model used by Koshimura et al. (Coast Eng J 51:243–273, 2008) with a 25-m dislocation better reproduces the wave travel time, flow depth and inundation area than the other models tested. The model reproduces realistically the pronounced coastal retreat in the northern part of Lhok Nga Bay (retreat ranging between 50 and 150 m), where Paris et al. (Geomorphology 104:59–72, 2009) estimated a mean retreat of 80 m. There is also a good agreement between the simulated area of coastal retreat (195,400 m²) and the field observations (203,200 m²). The simulation may underestimate the volume of tsunami deposits (611,700 m³ vs. 500,000–1,000,000 m³ estimated by Paris et al. (2009). The model fully reproduces the observed thickness of tsunami deposits when considering both bedload and suspension, even if bedload transport dominates. Limitations are due to micro-scale topographic, anthropic features (which are not always represented by the DEM) and the amount of debris which may influence flow dynamics and sediment transport.     

Revealing effect of bathymetry over tsunami run-up through factor analysis

The east coast of Tamil Nadu, particularly Chennai–Nagapattinam was worstly affected by the 2004 tsunami. Run-up shows remarkable variation of 2–8 m with maximum at Cuddalore port and minimum at Marina beach. Factors like width of dislocation, source distance, orientation of the coastline, and bathymetry guide tsunami surge. While most of the parameters are similar in characteristics for the entire coast, it is presumed that variation in bathymetry have played an imperative role in guiding run-up. Based on gradient bathymetry, up to 50 km off the coast was classified into five classes, viz shallow, moderate, and steep continental slope and continental shelf. Statistical analysis was performed between offshore bathymetry and run-up. The results clearly indicate that moderate slopes have guided tsunami to attain maximum height. While steeper slope have acted as barriers and gentle slopes have shoaled tsunami surge resulting in reduced run-up height. The study offers early but potentially meaningful guidance on the role of bathymetry on run-up.     

Geochemistry of deep-sea sediments in two cores retrieved at the mouth of the Coatzacoalcos River delta,western Gulf of Mexico,Mexico

Coastal margins, especially the river-influenced coastal areas, are considered as active interfaces between the continental and oceanic environments, which have huge dispersal of detrital materials and heavy metal input. It is well determined that the fine-grained sediments are important reservoir for the accumulation of heavy metals. In this study, we analyzed the radiocarbon age, texture, organic matter, carbonate content, and geochemical compositions of two sediment cores (GM42 and GM44) retrieved in front of the Coatzacoalcos River mouth basin, southwestern Gulf of Mexico (～864 and 845 m water depth, respectively). Our objective was to infer the sedimentation rate, intensity of weathering, provenance, and influence of anthropogenic activities on heavy metal contamination in sediments. The radiocarbon-age measurements of mixed planktonic foraminifera for core GM44 reveals an age of 21,289 ± 136 cal. years B.P., which fall within the Late Glacial Maximum (LGM; 21000 ± 2000 years B.P). The calculated sedimentation rate for core GM42 (~0.013 cm/year) is lower than in core GM44 (0.022 cm/year), which is probably due to the variations in detrital sediment input and/or seafloor topography. The weathering indices such as chemical index of alteration (CIA), chemical index of weathering (CIW), and plagioclase index of alteration (PIA) suggested that the source area experienced low to moderate intensity of chemical weathering under warm to humid climatic conditions. The SiO₂/Al₂O₃, Al₂O₃/Na₂O, and K₂O/Al₂O₃ ratio values indicated moderate to high compositional maturity. The major and trace element concentrations suggested that the sediments were likely derived from intermediate source rocks. The heavy metal contents indicated that the sediments were not contaminated by the industrial waste disposals supplied by the Coatzacoalcos River. The redox proxy sensitive elements such as V, Cr, Cu, and Zn indicated an oxic depositional environment for the deep-sea sediment cores. The application of discrimination diagrams for the geochemistry data revealed a passive margin setting for the sediment cores. The compositional variations observed at the upper sections (<30 cm) between the two sediment cores revealed that the type of detrital sediments supplied by the Coatzacoalcos River to the deep sea area is not uniform, which is also revealed by the variation in sedimentation rate.     

Lithostratigraphy of the late Early Permian (Kungurian) Wandrawandian Siltstone,New South Wales: record of glaciation?

The late Early Permian (273 – 271 Ma) Wandrawandian Siltstone in the southern Sydney Basin of New South Wales represents a marine highstand that can be correlated over 2000 km. A mainly fine-grained terrigenous clastic succession, the Wandrawandian Siltstone contains evidence for cold, possibly glacial conditions based on the presence of outsized clasts and glendonites, mineral pseudomorphs after ikaite, a mineral that forms in cold (0 – 7°C) marine sediments. A lithostratigraphic and facies analysis of the unit was conducted, based on extensive coastal outcrops and continuous drillcores. Eight facies associations were identified: (i) siltstone; (ii) siltstone with minor interbedded sandstone; (iii) interbedded tabular sandstone and siltstone; (iv) admixed sandstone and siltstone to medium-grained sandstone; (v) discrete, discontinuous sandstone intervals; (vi) chaotic conglomerate and sandstone in large channel forms; (vii) chaotically bedded and pervasively soft-sediment-deformed intervals; and (viii) tuffaceous siltstone and claystone. Using lithology and ichnology, relative water depths were ascribed to each facies association. Based on these associations, the unit was divided into five informal members that reveal a history of significant relative sea-level fluctuations throughout the formation: member I, interbedded/admixed sandstone and siltstone; member II, siltstone; member III, slumped masses of members I and II; member IV, siltstone and erosionally based lensoid sandstone beds and channel bodies; and member V, interbedded/admixed sandstone and siltstone with abundant tuffs. Member I marks an initial marine transgression from shoreface to offshore depths. Member II records the maximum water depth of the shelf. Member III is interpreted to be a slump sheet; plausible mechanisms for its emplacement include seismicity produced by tectonism or glacio-isostatic rebound, changes in pore-water pressures due to sea-level fluctuations, or an increase in sedimentation rates. Members IV and V record minor fluctuations in depositional environments from offshore to shoreface water depths. Member IV includes regionally extensive, large channel bodies, with composite fills that are interpreted as storm-influenced mass-flow deposits. Member V includes a greater abundance of volcanic ash. Glacial controls (isostasy, eustasy) and tectonic affects may have worked in concert to produce the changes in depositional environments observed in the Wandrawandian Siltstone.     

Transverse and linear dunes in an Upper Pleistocene marine sequence, Corinth Basin, Greece

A range of large-scale dunes of oolitic calcarenite composition are exposed in the Corinth Basin of central Greece. These transverse dunes and a very large linear dune (> 15 m high) lie within an Upper Pleistocene, transgressive marine sequence. Tidal flow, accelerated by constriction through a narrow, fault-bounded seaway, is interpreted to have generated the current velocities necessary to produce the dunes. Marine facies in the Upper Pleistocene sequence include beach to offshore conglomerates and sandstones with wave-modified sedimentary structures and herringbone cross-stratification. An offshore facies association comprises variably bioturbated siltstones and sandstones with a varied marine fauna that includes thermophile species such as scleractinian corals and Strombus bubonius. Oolitic sandstone facies also occur. Oolitic sands were apparently produced in shoal environments subject to tidal (and wave) action, and transported by dominant southerly currents over the southern part of the basin. Oolites accumulated in a linear dune 2.7 km long and 15–20 m high and in three-dimensional transverse dunes up to 10 m high having a variety of compound and simple internal geometries. The isolated, WSW-ENE-trending linear form exhibits angle of repose sedimentary dips (up to 35°) of avalanche sets on its SE flank and sets typically with dips of 15–20° to the NW. Internal high-angle discontinuities are developed in the SE-dipping lee face. It is proposed that a dominant north-to-south flow crossed over the crest obliquely, resulting in both net erosional and depositional processes on the lee flank. A subordinate (?tidal) current may have locally and or periodically crossed the dune crest in a westwards direction. A string of transverse dunes, which were located adjacent to a fault/marine terrace scarp, is interpreted to have originally coalesced to form the linear dune. The distribution of transverse and linear dunes together with the palaeogeographical reconstruction suggest that a marine connection periodically existed across the Corinth Isthmus during the Late Pleistocene due to a combination of active faulting and glacio-eustatic highstands of sea level.