Paleoecology and paleoenvironment of the Middle–Upper Jurassic sedimentary succession,central Saudi Arabia

Four Middle–Upper Jurassic sections from central Saudi Arabia have been investigated to evaluate microfacies types and macro-invertebrate paleocommunities and to interpret their paleoecology and paleoenvironments. The studied Jurassic successions are part of the Middle–Upper Callovian Tuwaiq Mountain Limestone and the Middle–Upper Oxfordian Hanifa Formation. Three main facies were recorded, including mud-supported microfacies, grain-supported microfacies and boundstones. A data matrix comprising 48 macrobenthic species in 35 samples collected from four sections were grouped into fifteen assemblages and one poorly fossiliferous interval by means of a Q-mode cluster analysis. The recorded macrofaunal assemblages have been subdivided into low-stress and high-stress on the basis of hydrodynamic conditions, substrate type, nutrient supply and hypoxia. The low-stress assemblages occur in (a) high-energy paleoenvironments with firm substrates; (b) high-energy shoals with unstable substrates of low cohesion and in (c) low-energy open marine environments with soft-substrates. The moderate- to high-stress assemblages occur in (a) oligotrophic environments with reduced terrigenous input in shelf lagoonal or in restricted inner ramp settings; (b) low-energy, soft substrate environments with hypoxia below the sediment–water interface; and, in (c) high-energy shoals and shelf lagoonal environments. The temporal distribution patterns of epifaunal and infaunal bivalve taxa are controlled by variations in water energy, substrate characteristics and productivity level. The reported litho- and biofacies confirmed that the Callovian Tuwaiq Mountain Limestone and the Oxfordian Hanifa Formation were deposited across wide spectrum of depositional environments, ranging from restricted lagoon to moderately deeper open marine basin, and providing the perfect conditions for macrofossils.     

Dinosaur ichnofauna of the Upper Jurassic/Lower Cretaceous of the Paraná Basin (Brazil and Uruguay)

Upper Jurassic and Lower Cretaceous sedimentary layers are represented in the Brazilian Paraná Basin by the fluvio–aeolian Guará Formation and the Botucatu Formation palaeoerg, respectively, overlapped by the volcanic Serra Geral Formation. In Uruguay, the corresponding sedimentary units are named Batoví and Rivera Members (both from the Tacuarembó Formation), and the lava flows constitute the Arapey Formation (also in Paraná Basin). Despite the lack of body fossils in the mentioned Brazilian formations, Guará/Batoví dinosaur fauna is composed of theropod, ornithopod and wide–gauge sauropod tracks and isolated footprints, as well as theropod teeth. In turn, the Botucatu/Rivera dinosaur fauna is represented by theropod and ornithopod ichnofossils smaller than those from the underlying units. The analysis of these dinosaur ichnological records and comparisons with other global Mesozoic ichnofauna indicates that there is a size reduction in dinosaur fauna in the more arid Botucatu/Rivera environment, which is dominated by aeolian dunes. The absence of sauropod trackways in the Botucatu Sandstone fits with the increasingly arid conditions because it is difficult for heavy animals to walk on sandy dunes, as well as to obtain the required amount of food resources. This comparison between the Upper Jurassic and Lower Cretaceous dinosaur fauna in south Brazil and Uruguay demonstrates the influence of aridization on the size of animals occupying each habitat.     

Upper Campanian–Maastrichtian holostratigraphy of the eastern Danish Basin

One of the most expanded upper Campanian–Maastrichtian successions worldwide has been cored in a series of boreholes in eastern Denmark. A high-resolution holostratigraphic analysis of this part of the Chalk Group has been undertaken on these cores, notably Stevns-1, in order to provide a record of changes in chalk facies, water depths and sea-water temperatures. Combined lithological data, a suite of petrophysical logs including gamma ray (GR) logs, nannofossil and dinoflagellate palaeontology, stable carbon isotopes, seismic reflection and refraction sections form the basis for the definition of two new formations and six members, three of which are new, and for recognition of Boreal nannofossil subzones UC15e^BP to UC20d^BP. The upper Campanian–lowermost Maastrichtian Mandehoved Formation is subdivided into the Flagbanke and Boesdal Members and the Maastrichtian Møns Klint Formation is subdivided into the Hvidskud, Rørdal, Sigerslev, Kjølby Gaard Marl and Højerup Members. The Boesdal and Rørdal Members show high GR values and a pronounced chalk-marl cyclicity. The Rørdal and the thin Kjølby Gaard Marl Members have a regional distribution and can be traced over most of the Danish Basin, whereas the Højerup Member is restricted to the easternmost part of Sjælland. The other members consist of rather featureless white chalk.     

Magnetostratigraphy of the Upper Jurassic–Lower Cretaceous from Argentina: Implications for the J-K boundary in the Neuquén Basin

A systematic sedimentologic and paleomagnetic study was carried out in the Vaca Muerta Formation, cropping out in the northern Neuquén Basin, west-central Argentina. The studied section is c. 280 m-thick and represents a carbonate ramp system bearing ammonites that indicate Late Jurassic–Early Cretaceous ages. The Vaca Muerta Formation is one of the most important unconventional hydrocarbon reservoirs in the world and its thorough study has become a relevant target in Argentina. The J-K boundary is comprised within this unit, and although it is well-dated through biostratigraphy (mainly ammonites), the position of particularly the boundary is yet a matter of hot debate. Therefore, the systematic paleomagnetic and cyclostratigraphic study in the Vaca Muerta Formation was considered relevant in order to obtain the first Upper Jurassic–Lower Cretaceous magnetostratigraphy of the southern hemisphere on the first place and to precise the position of the J-K boundary in the Neuquén Basin, on the other. Biostratigraphy is well studied in the area, so that paleomagnetic sampling horizons were reliably tied, particularly through ammonites. Almost 450 standard specimens have been processed for this study distributed along 56 paleomagnetic sampling horizons that were dated using ammonites. Paleomagnetic behaviours showed to be very stable, and their quality and primary origin have been proved through several paleomagnetic field tests The resultant magnetostratigraphic scale is made up of 11 reverse and 10 normal polarity zones, spanning the Andean Virgatosphinctes mendozanus (lower Tithonian) to Spiticeras damesi Zones (upper Berriasian). These polarity zones were correlated with those of the International Geomagnetic Polarity Time Scale 2012 and 2016 through the correlation between Andean and Tethyan ammonite zones. Cyclostratigraphy on the other hand, proved to be quite consistent with the magnetostratigraphy. Through the correlation of the resultant paleomagnetic and cyclostratigraphic data, it was possible to date the section with unprecedented precision, and therefore, to establish the position of the Jurassic-Cretaceous boundary. The paleomagnetic pole calculated from the primary magnetization is located at: Lon = 191.6°E, Lat = 76.2°S, A₉₅ = 3.5°, indicating a c. 24° clockwise rotation for the studied section, which is consistent with structural data of the region.     

Use of Sedimentary Structures in the Recognition of Sequence Boundaries in Upper Jurassic–Upper Cretaceous Peritidal Carbonates of the Western Taurides,Turkey

Subtidal, intertidal, and supratidal carbonate facies are recognized in the Upper Jurassic (Kimmeridgian)-Upper Cretaceous (Cenomanian) peritidal carbonates of the Fele area (Western Taurides, Turkey). Vertical stacking patterns of these facies are of a cyclical character; shallowing upward is the trend of the cyclicity in these carbonate facies. In-situ karstic breccias, collapse breccias, caliche (laminar calcrete), “Microcodium” accretion, and root casts are structures commonly indicative of third-order sequence boundaries. However, mud cracks, solution pores or vugs, sheet cracks, loferites, and birds-eye structures are commonly delineated by parasequence boundaries. In-situ or collapse breccias can be genetically derived from sheet cracks, mud cracks, solution pores or vugs, and birds-eye structures with increasing exposure time. The use of such sedimentary structures in the recognition of sequence boundaries is highly practical in the ancient carbonate platforms of the world, inasmuch as the sequence boundaries, as demonstrated in this study, correlate with the eustatic sea level curves.     

Chronology of the Lower–Middle Pleistocene succession of the south-western part of the Crotone Basin (Calabria,Southern Italy)

Biostratigraphy based on calcareous nannofossils, integrated by magnetostratigraphic, geochronological and isotopic data, allowed establishing a precise chronological framework for the Pleistocene succession within the south-western sector of the Crotone Basin (Calabria, Southern Italy), where the Pliocene–Pleistocene global stratotype section and point is defined, thus demonstrating that sedimentation was quasi-continuous during most of the Lower and Middle Pleistocene.At a large scale, the Pleistocene succession in this sector of the Crotone Basin is characterized by an evident shallowing-upwards trend, showing facies changes from bathyal to shelfal to littoral/continental. However, comparison between adjacent sectors within the investigated area demonstrates that stratigraphic architectures change vastly on very short distances. Our chronological constraints indicate that such changes in sedimentation styles probably occurred in response to differential subsidence rates, which originated tectonically-controlled synsedimentary structures where accommodation space and sediment yield were allotted unevenly. This articulated physiography led to striking differences in the overall thicknesses and organization of Pleistocene stratigraphies and, eventually, to a distinct diachroneity in the first appearance of shallow-marine deposits. In addition, superimposed are complex interplays between regional and local tectonics, eustasy and orbitally-forced climate changes. These interactions have been highlighted by the oxygen isotope stratigraphy established for a part of the studied succession, which is likely to document almost continuously the interval from Marine Isotope Stage (MIS) 26 to MIS 17. In its younger part (post-MIS 17), chronological ties are poor, as the succession is dominated by shallow-water to continental deposits showing a prominent organization into cyclothems. Nevertheless, based on the chronology of the underlying units, it is feasible that basin infill ended during MIS 15-MIS 14 times.     

Basin evolution and stratigraphic correlation of sedimentary-exhalative Zn–Pb deposits of the Early Cambrian Zarigan–Chahmir Basin,Central Iran

The Zarigan–Chahmir basin is placed in the southern part of a crustal domain known as the Central Iranian microcontinent, at the northwestern margin of Gondwana. This basin hosts abundant mineral deposits, particularly of the iron oxide–apatite (IOA), Fe–Mn exhalative, and Zn–Pb sedimentary-exhalative (SEDEX) types. The evolution of this basin is governed by the Proto-Tethys oceanic crust subduction beneath the Central Iranian microcontinent and by the resulting continental arc and back-arc. This evolution followed two major stages of rifting: (I) Stage I or syn-rift phase, related to intra-basin extension, is indicated by coarse-grained detrital sedimentary rocks and bimodal volcanism (basis of the Early Cambrian Volcano-Sedimentary Sequence; ECVSS), which filled half-graben systems. During this stage, tuff-hosted stratiform, exhalative Fe–Mn deposits along with Kiruna-type IOA deposits formed. The former deposits (e.g., Narigan) are related to early submarine rhyolithic volcanism of the rift-phase sequence, whereas the latter (e.g., Esfordi, Choghart, Chadormalu, Chahgaz) are connected to hydrothermal activity directly linked to the arc calk-alkaline magmatism. (II) Stage II or sag-phase involved the deposition of calcareous shales, siltstones and carbonates (upper part of the ECVSS). Sedimentation during this phase was controlled by basin subsidence and by the reactivation of the half-graben faults. SEDEX deposits are hosted within a carbonaceous, black siltstone unit of the sag-phase sequence, which was deposited during a period of rapid basin subsidence and under anoxic conditions. The location of synsedimentary faults and the prevalence of poorly-oxygenated bottom water conditions were key factors controlling SEDEX mineralization processes in the basin. A high geothermal gradient caused by maximum syn-rift magmatism and sub-crustal lithospheric thinning, affecting primarily the center, western and northwestern basin, may have driven a basin-scale hydrothermal fluid circulation. This finding explains the occurrence of larger, well correlable SEDEX deposits in the northwestern and central parts of the Zarigan–Chahmir basin.     

Geochemical evolution of groundwater in the Cambrian–Vendian aquifer system of the Baltic Basin

The shallowly buried marginal part of the Cambrian–Vendian confined aquifer system of the Baltic Basin is characterised by fresh and low δ¹⁸O composition water, whereas the deeply settled parts of the aquifer are characterized by typical Na–Ca–Cl basinal brines. Spatial variation in water geochemistry and stable isotope composition suggests mixing origin of the diluted water of three end-members—glacial melt water of the Weichselian Ice Age (115 000–10 000 BP), Na–Ca–Cl composition basin brine and modern meteoric water. The mixing has occurred in two stages. First, the intrusion and mixing of isotopically depleted glacial waters with basinal brines occurred during the Pleistocene glacial periods when the subglacial melt-water with high hydraulic gradient penetrated into the aquifer. The second stage of mixing takes place nowadays by intrusion of meteoric waters. The freshened water at the northern margin of the basin has acquired a partial equilibrium with the weakly cemented rock matrix of the aquifer.     

Constraints on the paleogeographic evolution of the North China Craton during the Late Triassic–Jurassic

This paper reports U–Pb–Hf isotopes of detrital zircons from Late Triassic–Jurassic sediments in the Ordos, Ningwu, and Jiyuan basins in the western-central North China Craton (NCC), with the aim of constraining the paleogeographic evolution of the NCC during the Late Triassic–Jurassic. The early Late Triassic samples have three groups of detrital zircons (238–363 Ma, 1.5–2.1 Ga, and 2.2–2.6 Ga), while the latest Late Triassic and Jurassic samples contain four groups of detrital zircons (154–397 Ma, 414–511 Ma, 1.6–2.0 Ga, and 2.2–2.6 Ga). The Precambrian zircons in the Late Triassic–Jurassic samples were sourced from the basement rocks and pre-Late Triassic sediments in the NCC. But the initial source for the 238–363 Ma zircons in the early Late Triassic samples is the Yinshan–Yanshan Orogenic Belt (YYOB), consistent with their negative zircon ε_Hf(t) values (−24 to −2). For the latest Late Triassic and Jurassic samples, the initial source for the 414–511 Ma zircons with ε_Hf(t) values of −18 to +9 is the Northern Qinling Orogen (NQO), and that for the 154–397 Ma zircons with ε_Hf(t) values of −25 to +12 is the YYOB and the southeastern Central Asian Orogenic Belt (CAOB). In combination with previous data of late Paleozoic–Early Triassic sediments in the western-central NCC and Permian–Jurassic sediments in the eastern NCC, this study reveals two shifts in detrital source from the late Paleozoic to Jurassic. In the Late Permian–Early Triassic, the western-central NCC received detritus from the YYOB, southeastern CAOB and NQO. However, in the early Late Triassic, detritus from the CAOB and NQO were sparse in basins located in the western-central NCC, especially in the Yan’an area of the Ordos Basin. We interpret such a shift of detrital source as result of the uplift of the eastern NCC in the Late Triassic. In the latest Late Triassic–Jurassic, the southeastern CAOB and the NQO restarted to be source regions for basins in the western-central NCC, as well as for basins in the eastern NCC. The second shift in detrital source suggests elevation of the orogens surrounding the NCC and subsidence of the eastern NCC in the Jurassic, arguing against the presence of a paleo-plateau in the eastern NCC at that time. It would be subsidence rather than elevation of the eastern NCC in the Jurassic, due to roll-back of the subducted paleo-Pacific plate and consequent upwelling of asthenospheric mantle.     

The tectono-sedimentary evolution of a hyper-extended rift basin: the example of the Arzacq–Mauléon rift system (Western Pyrenees,SW France)

In this paper, we present a sedimentary and structural analysis that together with maps, sections and new Ar/Ar data enable to describe the tectono-sedimentary evolution of the Mauléon hyper-extended rift basin exposed in the W-Pyrenees. Hyper-extension processes that ultimately resulted in exhuming mantle rocks are the result of the subsequent development of two diachronous detachment systems related to two evolutional stages of rifting. An initial Late Aptian Early Albian crustal thinning phase is first recorded by the development of a crustal necking zone controlled by the north-vergent Southern Mauléon Detachment system. During a subsequent exhumation phase, active faulting migrates to the north with the emplacement of the Northern Mauléon detachment system that exhumed north section thinned continental crust and mantle rocks. This diachronous crustal thinning and exhumation processes are also recorded by the diachronous deposition of syn-tectonic sedimentary tracts above the two supra-detachment sub-basins. Syn-tectonic sedimentary tracts record the progressive exhumation of footwall rocks along detachment systems. Tectonic migration from the southern to the northern Mauléon Detachment system is recorded by the coeval deposition of “sag” deposits above the necking zone basin and of syn-tectonic tracts above exhumed rocks north section. Located on a hanging-wall situation related to the Mauléon hyper-extension structures, the Arzacq Basin also records a major crustal thinning phase as shown by its subsidence evolution so as by deep seismic images. The absence of major top-basement structures and its overall sag morphology suggest that crustal thinning processes occurred by decoupled extension of lower crustal levels contrasting with the Southern Mauléon Detachment system. Reconciling observations from the Mauléon and Arzacq Basins, we finally propose in this paper that they were the result of one and the same asymmetric crustal thinning and exhumation processes, where extension is accommodated into the upper crust in the Mauléon Basin (lower plate basin) and relayed in ductile lower crust below the Arzacq Basin (upper plate basin).     

Palynostratigraphy of a Jurassic–Cretaceous transitional succession in the Himalayan Tethys,southern Xizang (Tibet), China

A palynological analysis of a Late Jurassic–Early Cretaceous succession in the Himalayan Tethys, Gyangzê County, southern Xizang (Tibet) provides, for the first time, evidence of changing palynofloras through the Jurassic/Cretaceous (J/K) boundary. Species that are stratigraphically important and potential markers for delineating the boundary include both miospores and dinoflagellate cysts. The presence of the spores Crybelosporites sp. cf. stylosus, Foraminisporis wonthaggiensis, Jiaohepollis verus and Toroisporis welzowense and the cysts Cassiculosphaeridia delicata and Rhynchodiniopsis serrata imply that the J/K boundary is between samples 06-21-1 and 06-21-3. The occurrence of Aequitriradites spinulosus and Cicatricosisporites spp. a little below this level and of ?Dictyotosporites sp. cf. speciosus slightly above it is also significant. These results show that it is possible to locate the J/K boundary in the Himalayan Tethys near top of the Weimei Formation and the lower part of the Gyabula Formation in southern Xizang. This succession also contains various marine invertebrate fossils, including ammonites, bivalves and belemnites, and thus has considerable potential for erecting an integrated biostratigraphy around the J/K boundary in the eastern Tethyan realm. Palynofloristic correlation implies a more northerly location for the fossil locality at Gyangzê than that of northwest Australia during the latest Jurassic and earliest Cretaceous, which can be further constrained to around 43°S.     

High-resolution cyclostratigraphic analysis from magnetic susceptibility in a Lower Kimmeridgian (Upper Jurassic) marl–limestone succession (La Méouge,Vocontian Basin,France)

High-resolution magnetic susceptibility (MS) analysis was carried out on a Lower Kimmeridgian alternating marl–limestone succession of pelagic origin that crops out at La Méouge (Vocontian Basin, southeastern France). The aim of the study was to characterize the strong, dm-scale sedimentary cyclicity of the succession at a very high resolution, and to analyze the cycles for evidence of astronomical forcing. From marl to limestone, MS varies progressively and closely tracks the highest frequency cyclicity corresponding to the basic marl–limestone couplets. Long-term wavelength cycling modulates the high-frequency cyclicity (couplets), and appears to be controlled by clay content. Spectral analysis of the MS record reveals the presence of the complete suite of orbital frequencies in the precession, obliquity, and eccentricity (95–128 ka and 405 ka) bands with very high amplitude of the precession index cycles originating from dm-scale couplets. 405 ka-eccentricity cycles are very pronounced in the MS maxima of the marl members of the couplets, suggesting eccentricity-driven detrital input to the basin. 405 ka-orbital tuning of the MS maxima further sharpens all of the orbital frequencies present in the succession. These results are similar to those of previous studies at La Méouge that used carbonate content observed in field. Our results are also in accordance with cyclostratigraphic studies in Spain and Canada that report dominant precession index forcing. By contrast, in the Kimmeridge Clay (Dorset, UK), obliquity forcing dominates cyclic sedimentation, with weaker influence from the precession index. Ammonite zone duration estimates are made by counting the interpreted precession cycles, and provide an ultra-high resolution assessment of geologic time. In sum, this study demonstrates the power of the MS as a proxy in characterizing the high-resolution cyclostratigraphy of Mesozoic sections, particularly in alternating marl–limestone successions, and for high-resolution correlation and astronomical calibration of the geologic time scale.     

Mass-transport Deposits of the Upper Cretaceous Qingshankou Formation, Songliao Terrestrial Basin, Northeast China: Depositional Characteristics, Recognition Criteria and External Geometry

Extensive mass transport deposits（MTDs）, which form a significant component of the stratigraphic record in ancient and modern deep water systems, mostly distributed in the continental margin of ocean basins worldwide. To date, no large-scale MTDs have been found in Chinese terrestrial basins. Based on integrated analysis of the seismic, drilling, core and logging data, this article report MTDs have been found in Songliao terrestrial basin（SLTB）, Northeast China. During the depositional period of the Upper Cretaceous Qingshankou Formation, slope break of lacustrine basins was an ideal discharge place for gravity depositions. Regional sedimentary study of MTDs reveals that Cretaceous-age MTDs in SLTB were deposited in slope-break environments by slide, slump and debris flow, and MTDs were mixed with little turbidite simultaneously. Besides the massive aspect, key features of MTDs are the common presence of deformational structures or softsedimentary deformation, floating shale clasts, boudins, microfaults, distortion beddings, rotated sand debris. Detailed mapping of two three-dimensional（3-D） seismic surveys acquired in Yingtai（YT） and Haituozi（HTZ） areas reveals that MTDs are characterized by chaotic, mounded, and transparent seismic reflection. Growth fault, slope gully and geomorphology of the slope break greatly influenced the sedimentary process and external geometry of MTDs, and as a consequence, MTDs in SLTB exhibit classic fan-like geometry and some special（non-fan-like） external geometry. Furthermore, fanlike MTDs can be divided into three subcategories, including isolated fan, mother-son fan and stacked fan. Non-fan-like MTDs can be divided into two subcategories, strip-like MTDs and faulted-pit MTDs. A new sedimentary model has been built for MTDs in SLTB. MTDs have become a new exploration and development target in the SLTB.     

Deposition and deformation of fluvial–lacustrine sediments of the Upper Triassic–Lower Jurassic Whitmore Point Member,Moenave Formation,northern Arizona

The stratigraphic section of the Upper Triassic–Lower Jurassic Whitmore Point Member of the Moenave Formation at Potter Canyon, Arizona, comprises c. 26 m of gray to black shales and red mudstones interbedded with mainly sheet-like siltstones and sandstones. These strata represent deposition from suspension and sheetflow processes in shallow, perennial meromictic to ephemeral lakes, and on dry mudflats of the terminal floodout of the northward-flowing Moenave stream system. The lakes were small, as indicated by the lack of shoreline features and limited evidence for deltas. Changes in base level, likely forced by climate change, drove the variations between mudflat and perennial lacustrine conditions. Lenticular sandstones that occur across the outcrop face in the same stratigraphic interval in the lower part of the sequence represent the bedload fill of channels incised into a coarsening-upward lacustrine sequence following a fall in base level. These sandstones are distinctive for the common presence of over-steepened bedding, dewatering structures, and less commonly, folding. Deformation of these sandstones is interpreted as aseismic due to the lack of features typically associated with seismicity, such as fault-graded bedding, diapirs, brecciated fabrics and clastic dikes. Rapid deposition of the sands on a fluid-rich substrate produced a reverse density gradient that destabilized, and potentially fluidized the underlying, finer-grained sediments. This destabilization allowed synsedimentary subsidence of most of the channel sands, accompanied by longitudinal rotation and/or ductile deformation of the sand bodies.     

Structure and tectonic evolution of the Late Jurassic–Early Cretaceous Wandashan accretionary complex,NE China

The Late Jurassic–Early Cretaceous Wandashan accretionary complex (AC) in NE China is a key region for constraining the subduction and accretion of the Palaeo-Pacific Ocean; however, the protoliths and structure of the region remain poorly understood, resulting in debates regarding crustal growth mechanisms and subduction-related accretionary processes in Northeast China. In this contribution, we integrate detailed field observations, ocean plate stratigraphy (OPS) reconstruction, and associated geological data to determine the structure and tectonic evolution of the Wandashan AC. The Wandashan AC formed through the progressive incorporation of OPS units along an oceanic trench. The observed OPS comprises, in ascending order, Permian basalt and limestone, Middle Triassic–Early Jurassic chert, Middle Jurassic siliceous shale and mudstone, and Late Jurassic–Early Cretaceous turbidite. Numerous NNE–SSW-striking thrust faults have segmented the OPS into a series of bedding-parallel tectonic slices that were successively thrust over the Jiamusi massif along a basal thrust (the Yuejinshan Fault), producing a large-scale imbricate thrust system. The Wandashan AC underwent oceanward accretion via multiple deformational processes. The OPS units were detached and rearranged along or within a decollement through offscraping, underplating, thrusting, and duplexing. The units were then emplaced over the Jiamusi massif along the basal thrust. The timing of accretion and thrusting is constrained to the latest Middle Jurassic to earliest Early Cretaceous (ca. 167–131 Ma). Reconstructed accretion-related structural lines within the Wandashan AC trend dominantly NE–SW, close to the direction of Jurassic extension at the eastern Asian continental margin. Large-scale left-lateral strike-slip movement on the Dunmi Fault during the late Early Cretaceous resulted in the folding of structural lines within the Wandashan AC, producing their present-day westward-convex orientation.     

Paleo-environment and provenance in a lacustrine shallow-water delta-meandering river sedimentary system: insights from the Middle–Upper Jurassic formations of the Fukang Sag of Junggar Basin,NW China

The Middle–Upper Jurassic Shishugou Group in the central Junggar Basin was deposited in a lacustrine shallow-water delta-meandering river sedimentary system. The integrated petrological (thin-section, granularity and heavy minerals analysis), geochemical (trace elements and rare earth elements analysis) and geophysical analyses (well logging and 3D-seismic slice analysis) are used to determine redox conditions, paleoclimate, paleosalinity, provenance and sedimentary evolution extant during deposition of the Shishugou Group: (1) the redox condition changed from a weak anoxic/oxic condition to a strongly oxic condition; (2) the climate changed from humid to hot and arid in the Middle–Late Jurassic, which may have resulted in the lake water having slight–medium salinity; (3) the relatively distant northeastern provenance from the Kelameili Mountain is the most important sediment source; and (4) the south provenance from the Tianshan Mountains (Bogeda Shan) decreases with the development of the sag piedmont, which supplies sediments to the southeastern Fukang Sag. The sedimentary environment changed from a lacustrine shallow-water delta to a meandering river during the deposition of the Shishugou Group. The shallow-water meandering river delta was characterised by pervasive mudstones with oxide colours, thin single-layer sand bodies (1–15?m, mean 3?m), relatively low sand–strata ratios (0.2–0.5) and the absence of progradation, mouth bars and reverse rhythms. The gentle slope is the primary condition necessary for the formation of a shallow-water meandering river delta. Paleo-environment (climate change from warm-humid to hot-arid) and the stable and remote Kelameili Mountain provenance played critical roles in the development and evolution of lacustrine–delta-meandering river sedimentary systems.