Interaction of gypsum with lead in aqueous solutions

Sorption processes on mineral surfaces are a critical factor in controlling the distribution and accumulation of potentially harmful metals in the environment. This work investigates the effectiveness of gypsum (CaSO₄⋅2H₂O) to sequester Pb. The interaction of gypsum fragments with Pb-bearing solutions (10, 100 and 1000 mg/L) was monitored by performing macroscopic batch-type experiments conducted at room temperature. The aqueous phase composition was periodically determined by Atomic Absorption Spectrometry (AAS), Ion Chromatography (IC) and Inductively Coupled Plasma Optical Emission Spectroscopy (ICP–OES). Regardless of the [Pb_aq]_initial, a [Pb_aq]_final < 4 mg/L was always reached. The uptake process was fast (t < 1 h) for [Pb_aq]_initial ? 100 mg/L and significantly slower (t > 1 week) for [Pb_aq]_initial = 10 mg/L. Speciation calculations revealed that after a long time of interaction (1 month), all the solutions reached equilibrium with respect to both gypsum and anglesite. For [Pb_aq]_initial ? 100 mg/L, sorption takes place mainly via the rapid dissolution of gypsum and the simultaneous formation of anglesite both on the gypsum surface and in the bulk solution. In the case of [Pb_aq]_initial = 10 mg/L, no anglesite precipitation was observed, but surface spectroscopy (proton Rutherford Backscattering Spectroscopy, p-RBS) confirmed the formation of Pb-bearing surface layers on the (0 1 0) gypsum surface in this case also. This study shows that the surface of gypsum can play an important role in the attenuation of Pb in contaminated waters.     

Genesis of the Huangshaping W–Mo–Cu–Pb–Zn polymetallic deposit in Southeastern Hunan Province,China: Constraints from fluid inclusions,trace elements,and isotopes

The Huangshaping polymetallic deposit is located in southeastern Hunan Province, China. It is a world-class W–Mo–Pb–Zn–Cu skarn deposit in the Nanling Range Metallogenic Belt, with estimated reserves of 74.31 Mt of W–Mo ore at 0.28% WO₃ and 0.07% Mo, 22.43 Mt of Pb–Zn ore at 3.6% Pb and 8.00% Zn, and 20.35 Mt of Cu ore at 1.12% Cu. The ore district is predominantly underlained by carbonate formations of the Lower Carboniferous period, with stocks of quartz porphyry, granite porphyry, and granophyre. Skarns occurred in contact zones between stocks and their carbonate wall rocks, which are spatially associated with the above-mentioned three types of ores (i.e., W–Mo, Pb–Zn, and Cu ores).Three types of fluid inclusions have been identified in the ores of the Huangshaping deposit: aqueous liquid–vapor inclusions (Type I), daughter-mineral-bearing aqueous inclusions (Type II), and H₂O–CO₂ inclusions (Type III). Systematic microthermometrical, laser Raman spectroscopic, and salinity analyses indicate that high-temperature and high-salinity immiscible magmatic fluid is responsible for the W–Mo mineralization, whereas low-temperature and low-salinity magmatic-meteoric mixed fluid is responsible for the subsequent Pb–Zn mineralization. Another magmatic fluid derived from deep-rooted magma is responsible for Cu mineralization.Chondrite-normalized rare earth element patterns and trace element features of calcites from W–Mo, Pb–Zn, and Cu ores are different from one another. Calcite from Cu ores is rich in heavy rare earth elements (187.4–190.5 ppm), Na (0.17%–0.19%), Bi (1.96–64.60 ppm), Y (113–135 ppm), and As (9.1–29.7 ppm), whereas calcite from W–Mo and Pb–Zn ores is rich in Mn (> 10.000 ppm) and Sr (178–248 ppm) with higher Sr/Y ratios (53.94–72.94). δ¹⁸O values also differ between W–Mo/Pb–Zn ores (δ¹⁸O = 8.10‰–8.41‰) and Cu ores (δ¹⁸O = 4.34‰–4.96‰), indicating that two sources of fluids were, respectively, involved in the W–Mo, Pb–Zn, and Cu mineralization.Sulfur isotopes from sulfides also reveal that the large variation (4‰–19‰) within the Huangshaping deposit is likely due to a magmatic sulfur source with a contribution of reduced sulfate sulfur host in the Carboniferous limestone/dolomite and more magmatic sulfur involved in the Cu mineralization than that in W–Mo and Pb–Zn mineralization. The lead isotopic data for sulfide (galena: ²⁰⁶Pb/²⁰⁴Pb = 18.48–19.19, ²⁰⁷/²⁰⁴Pb = 15.45–15.91, ²⁰⁸/²⁰⁴Pb = 38.95–39.78; sphalerite: ²⁰⁶Pb/²⁰⁴Pb = 18.54–19.03, ²⁰⁷/²⁰⁴Pb = 15.60–16.28, ²⁰⁸/²⁰⁴Pb = 38.62–40.27; molybdenite: ²⁰⁶Pb/²⁰⁴Pb = 18.45–19.21, ²⁰⁷/²⁰⁴Pb = 15.53–15.95, ²⁰⁸/²⁰⁴Pb = 38.77–39.58 chalcopyrite: ²⁰⁶Pb/²⁰⁴Pb = 18.67–19.38, ²⁰⁷/²⁰⁴Pb = 15.76–19.90, and ²⁰⁸/²⁰⁴Pb = 39.13–39.56) and oxide (scheelite: ²⁰⁶Pb/²⁰⁴Pb = 18.57–19.46, ²⁰⁷/²⁰⁴Pb = 15.71–15.77, ²⁰⁸/²⁰⁴Pb = 38.95–39.13) are different from those of the wall rock limestone (²⁰⁶Pb/²⁰⁴Pb = 18.34–18.60, ²⁰⁷/²⁰⁴Pb = 15.49–15.69, ²⁰⁸/²⁰⁴Pb = 38.57–38.88) and porphyries (²⁰⁶Pb/²⁰⁴Pb = 17.88–18.66, ²⁰⁷/²⁰⁴Pb = 15.59–15.69, ²⁰⁸/²⁰⁴Pb = 38.22–38.83), suggesting Pb²⁰⁶-, U²³⁸-, and Th ²³²-rich material are involved in the mineralization. The Sm–Nd isotopes of scheelite (ε_Nd(t) = − 6.1 to − 2.9), garnet (ε_Nd(t) = − 6.8 to − 6.1), and calcite (ε_Nd(t) = − 6.3) from W–Mo ores as well as calcite (ε_Nd(t) = − 5.4 to − 5.3) and scheelite (ε_Nd(t) = − 2.9) from the Cu ores demonstrate suggest more mantle-derived materials involved in the Cu mineralization.In the present study we conclude that two sources of ore-forming fluids were involved in production of the Huangshaping W–Mo–Pb–Zn–Cu deposit. One is associated with the granite porphyry magmas responsible for the W–Mo and then Pb–Zn mineralization during which its fluid evolved from magmatic immiscible to a magmatic–meteoritic mixing, and the other is derived from deep-rooted magma, which is related to Cu-related mineralization.     

Kinetics of Au (III) extraction by DBC from hydrochloric solution using Lewis cell

The kinetics of forward extraction [AuCl₄]^? from aqua regia medium by diethylene glycol dibutyl ether (DBC) have been investigated by the Lewis cell (LC) technique. At first gold extraction has been carried out under different experimental conditions for achieving the stoichiometry coefficients and the value of the extraction equilibrium constant (K = 0.1). For kinetic data treatment, flux ‘F’ method has been applied. Reaction order with respect to DBC, pH and [AuCl₄]^? was determined and then the rate constant was calculated. The rate of gold extraction from 2 M chloride medium can be expressed as F = 10^0.88[AuCl₄^?]^1.25 [DBC]^0.4 [H⁺]^?0.22. Kinetics data were treated by EVIEWS software and coefficients were obtained. The comparison of manual and software results indicated that the results had good conformity. Influence of temperature was studied and then activation energy, E_a, (11.17 kJ/mol), activation enthalpy (11.66 kJ/mol) and entropy (?187 J/mol K) were calculated by using Arrhenius and activation complex theory respectively. E_a value (< 20.9 kJ/mol) indicates that, the extraction of gold (III) in the investigated system is controlled by diffusion process.     

Controls on biochemical oxygen demand in the upper Klamath River,Oregon

A series of 30-day biochemical oxygen demand (BOD) experiments were conducted on water column samples from a reach of the upper Klamath River that experiences hypoxia and anoxia in summer. Samples were incubated with added nitrification inhibitor to measure carbonaceous BOD (CBOD), untreated to measure total BOD, which included demand from nitrogenous BOD (NBOD), and coarse-filtered to examine the effect of removing large particulate matter. All BOD data were fit well with a two-group model, so named because it considered contributions from both labile and refractory pools of carbon: BOD_t = a₁(1 ? e^? a₀t) + a₂t. Site-average labile first-order decay rates a₀ ranged from 0.15 to 0.22/day for CBOD and 0.11 to 0.29/day for BOD. Site-average values of refractory zero-order decay rates a₂ ranged from 0.13 to 0.25 mg/L/day for CBOD and 0.01 to 0.45 mg/L/day for BOD; the zero-order CBOD decay rate increased from early- to mid-summer. Values of ultimate CBOD for the labile component a₁ ranged from 5.5 to 28.8 mg/L for CBOD, and 7.6 to 30.8 mg/L for BOD. Two upstream sites had higher CBOD compared to those downstream. Maximum measured total BOD₅ and BOD₃₀ during the study were 26.5 and 55.4 mg/L; minimums were 4.2 and 13.6 mg/L. For most samples, the oxygen demand from the three components considered here were: labile CBOD > NBOD > refractory CBOD, though the relative importance of refractory CBOD to oxygen demand increased over time. Coarse-filtering reduced CBOD for samples with high particulate carbon and high biovolumes of Aphanizomenon flos-aquae. There was a strong positive correlation between BOD, CBOD, and the labile component of CBOD to particulate C and N, with weaker positive correlation to field pH, field dissolved oxygen, and total N. The refractory component of CBOD was not correlated to particulate matter, instead showing weak but statistically significant correlation to dissolved organic carbon, UV absorbance at 254 nm, and total N. Particulate organic matter, especially the alga A.flos-aquae, is an important component of oxygen demand in this reach of the Klamath River, though refractory dissolved organic matter would continue to exert an oxygen demand over longer time periods and as water travels downstream.     

In situ Pb and bulk Sr isotope analysis of the Yinchanggou Pb-Zn deposit in Sichuan Province (SW China): Constraints on the origin and evolution of hydrothermal fluids

The Yinchanggou Pb-Zn deposit, located in southwestern Sichuan Province, western Yangtze Block, is stratigraphically controlled by late Ediacaran Dengying Formation and contains >0.3 Mt of metal reserves with 11 wt% Pb + Zn. A principal feature is that this deposit is structurally controlled by normal faults, whereas other typical deposits nearby (e.g. Maozu) are controlled by reverse faults. The origin of the Yinchanggou deposit is still controversial. Ore genetic models, based on conventional whole-rock isotope tracers, favor either sedimentary basin brine, magmatic water or metamorphic fluid sources. Here we use in situ Pb and bulk Sr isotope features of sulfide minerals to constrain the origin and evolution of hydrothermal fluids. The Pb isotope compositions of galena determined by femtosecond LA-MC-ICPMS are as follows: ²⁰⁶Pb/²⁰⁴Pb = 18.17–18.24, ²⁰⁷Pb/²⁰⁴Pb = 15.69–15.71, ²⁰⁸Pb/²⁰⁴Pb = 38.51–38.63. These in situ Pb isotope data overlap with bulk-chemistry Pb isotope compositions of sulfide minerals (²⁰⁶Pb/²⁰⁴Pb = 18.11–18.40, ²⁰⁷Pb/²⁰⁴Pb = 15.66–15.76, ²⁰⁸Pb/²⁰⁴Pb = 38.25–38.88), and both sets of data plotting above the Pb evolution curve of average upper continental crust. Such Pb isotope signatures suggest an upper crustal source of Pb. In addition, the coarse-grained galena in massive ore collected from the deep part has higher ²⁰⁶Pb/²⁰⁴Pb ratios (18.18–18.24) than the fine-grained galena in stockwork ore sampled from the shallow part (²⁰⁶Pb/²⁰⁴Pb = 18.17–18.19), whereas the latter has higher ²⁰⁸Pb/²⁰⁴Pb ratios (38.59–38.63) than the former (²⁰⁸Pb/²⁰⁴Pb = 38.51–38.59). However, both types of galena have the same ²⁰⁷Pb/²⁰⁴Pb ratios (15.69–15.71). This implies two independent Pb sources, and the metal Pb derived from the basement metamorphic rocks was dominant during the early phase of ore formation in the deep part, whereas the ore-hosting sedimentary rocks supplied the majority of metal Pb at the late phase in the shallow part. In addition, sphalerite separated from different levels has initial ⁸⁷Sr/⁸⁶Sr ratios ranging from 0.7101 to 0.7130, which are higher than the ore formation age-corrected ⁸⁷Sr/⁸⁶Sr ratios of country sedimentary rocks (⁸⁷Sr/⁸⁶Sr_200 Ma = 0.7083–0.7096), but are significantly lower than those of the ore formation age-corrected basement rocks (⁸⁷Sr/⁸⁶Sr_200 Ma = 0.7243–0.7288). Again, such Sr isotope signatures suggest that the above two Pb sources were involved in ore formation. Hence, the gradually mixing process of mineralizing elements and associated fluids plays a key role in the precipitation of sulfide minerals at the Yinchanggou ore district. Integrating all the evidence, we interpret the Yinchanggou deposit as a strata-bound, normal fault-controlled epigenetic deposit that formed during the late Indosinian. We also propose that the massive ore is formed earlier than the stockwork ore, and the temporal-spatial variations of Pb and Sr isotopes suggest a certain potential of ore prospecting in the deep mining area.     

Ore genesis and hydrothermal evolution of the Huanggang skarn iron–tin polymetallic deposit,southern Great Xing'an Range: Evidence from fluid inclusions and isotope analyses

The southern Great Xing'an Range is one of the most important metallogenic belts in northern China, and contains numerous Pb–Zn–Ag–Cu–Sn–Fe–Mo deposits. The Huanggang iron–tin polymetallic skarn deposit is located in the Sn-polymetallic metallogenic sub-belt. Skarns and iron orebodies occur as lenses along the contact between granite plutons and the Lower Permian Huanggangliang Formation marble or Dashizhai Formation andesite. Field evidence and petrographic observations indicate that the three stages of hydrothermal activity, i.e., skarn, oxide and sulfide stages, all contributed to the formation of the Huanggang deposit.The skarn stage is characterized by the formation of garnet and pyroxene, and high-temperature, hypersaline hydrothermal fluids with isotopic compositions that are similar to those of typical magmatic fluids. These fluids most likely were generated by the separation of brine from a silicate melt instead of being a product of aqueous fluid immiscibility. The iron oxide stage coincides with the replacement of garnet and pyroxene by amphibole, chlorite, quartz and magnetite. The hydrothermal fluids of this stage are represented by L-type fluid inclusions that coexist with V-type inclusions with anomalously low δD values (approximately − 100 to − 116‰). The decrease in ore fluid δ¹⁸O_H2O values with time coincides with marked decreases in the fluid salinity and temperature. Based on the fluid inclusion and stable isotopic data, the ore fluid evolved by boiling of the magmatic brine. The sulfide stage is characterized by the development of sphalerite, chalcopyrite, fluorite, and calcite veins, and these veins cut across the skarns and orebodies. The fluids during this stage are represented by inclusions with a variable but continuous sequence of salinities, mainly low-salinity inclusions. These fluids yield the lowest δ¹⁸O_H2O values and moderate δD values ( − 1.6 to − 2.8‰ and − 101 to − 104‰, respectively). The data indicate that the sulfide stage fluids originated from the mixing of residual oxide-stage fluids with various amounts of meteoric water. Boiling occurred during this stage at low temperatures.The sulfur isotope (δ³⁴S) values of the sulfides are in a narrow range of − 6.70 to 4.50‰ (mean = − 1.01‰), and the oxygen isotope (δ¹⁸O) values of the magnetite are in a narrow range of 0.1 to 3.4‰. Both of these sets of values suggest that the ore-forming fluid is of magmatic origin. The lead isotope compositions of the ore (²⁰⁶Pb/²⁰⁴Pb = 18.252–18.345, ²⁰⁷Pb/²⁰⁴Pb = 15.511–15.607, and ²⁰⁸Pb/²⁰⁴Pb = 38.071–38.388) are consistent with those of K-feldspar granites (²⁰⁶Pb/²⁰⁴Pb = 18.183–18.495, ²⁰⁷Pb/²⁰⁴Pb = 15.448–15.602, ²⁰⁸Pb/²⁰⁴Pb = 37.877–38.325), but significantly differ from those of Permian marble (²⁰⁶Pb/²⁰⁴Pb = 18.367–18.449, ²⁰⁷Pb/²⁰⁴Pb = 15.676–15.695, ²⁰⁸Pb/²⁰⁴Pb = 38.469–38.465), which also suggests that the ore-forming fluid is of magmatic origin.     

Contemporary lead concentration and stable lead isotope ratio distribution in forest moss across the Czech Republic

Lead concentrations and stable lead isotopes (²⁰⁴Pb, ²⁰⁶Pb, ²⁰⁷Pb, ²⁰⁸Pb) were measured in forest moss samples (Pleurozium schreberi or Scleropodium purum) collected at 273 sites across the Czech Republic during 2010. Continuously decreasing median Pb concentrations in moss were documented over the last two decades: 1995: 11 mg/kg, 2000: 5.66 mg/kg, 2005: 4.94 mg/kg and 2010: 2.85 mg/kg. Several local anomalies have decreased in scale, the overall regional distribution patterns remained, however, the same. The regional Pb isotope ratio distributions show that the ratios show little variation for a large central part of the country and provide the large-scale background isotope ratios for the Czech Republic of about ²⁰⁴Pb/²⁰⁶Pb = 0.0550, ²⁰⁶Pb/²⁰⁷Pb = 1.167, ²⁰⁶Pb/²⁰⁸Pb = 0.478 and ²⁰⁷Pb/²⁰⁸Pb = 0.409 for 2010. This background Pb isotope ratio signal in moss has been locally (900–7500 km²) modified by specific Pb isotopic ratio signals caused by deposition of Pb emissions from known local anthropogenic Pb emission sources, such as industrial combustion of local coal, and a variety of industrial enterprises (metallurgical, engineering and glass works). At some sites where mining of uranium and polymetallic ores took place the moss samples show also a locally specific Pb isotope signal. The in terms of area affected largest deviations in the Pb-isotope ratios, e.g., in the Bohemian Massif, may be due to the input of geogenic dust.     

A LREE-depleted component in the Afar plume: Further evidence from Quaternary Djibouti basalts

Major, trace element and isotopic (Sr, Nd, Pb) data and unspiked K–Ar ages are presented for Quaternary (0.90–0.95 Ma old) basalts from the Hayyabley volcano, Djibouti. These basalts are LREE-depleted (La_n/Sm_n = 0.76–0.83), with ⁸⁷Sr/⁸⁶Sr ratios ranging from 0.70369 to 0.70376, and rather homogeneous ¹⁴³Nd/¹⁴⁴Nd (ε_Nd = + 5.9–+ 7.3) and Pb isotopic compositions (²⁰⁶Pb/²⁰⁴Pb = 18.47–18.55, ²⁰⁷Pb/²⁰⁴Pb = 15.52–15.57, ²⁰⁸Pb/²⁰⁴Pb = 38.62–38.77). They are very different from the underlying enriched Tadjoura Gulf basalts, and from the N-MORB erupted from the nascent oceanic ridges of the Red Sea and Gulf of Aden. Their compositions closely resemble those of (1) depleted Quaternary Manda Hararo basalts from the Afar depression in Ethiopia and (2) one Oligocene basalt from the Ethiopian Plateau trap series. Their trace element and Sr, Nd, Pb isotope systematics suggest the involvement of a discrete but minor LREE-depleted component, which is probably an intrinsic part of the Afar plume.     

Geochemical constraints on Cu–Fe and Fe skarn deposits in the Edong district,Middle–Lower Yangtze River metallogenic belt,China

Copper and iron skarn deposits are economically important types of skarn deposits throughout the world, especially in China, but the differences between Cu and Fe skarn deposits are poorly constrained. The Edong ore district in southeastern Hubei Province, Middle–Lower Yangtze River metallogenic belt, China, contains numerous Fe and Cu–Fe skarn deposits. In this contribution, variations in skarn mineralogy, mineralization-related intrusions and sulfur isotope values between these Cu–Fe and Fe skarn deposits are discussed.The garnets and pyroxenes of the Cu–Fe and Fe skarn deposits in the Edong ore district share similar compositions, i.e., dominantly andradite (Ad_29–100Gr_0–68) and diopside (Di_54–100Hd_0–38), respectively. This feature indicates that the mineral compositions of skarn silicate mineral assemblages were not the critical controlling factors for variations between the Cu–Fe and Fe skarn deposits. Intrusions associated with skarn Fe deposits in the Edong ore district differ from those Cu–Fe skarn deposits in petrology, geochemistry and Sr–Nd isotope. Intrusions associated with Fe deposits have large variations in their (La/Yb)_N ratios (3.84–24.6) and Eu anomalies (δEu = 0.32–1.65), and have relatively low Sr/Y ratios (4.2–44.0) and high Yb contents (1.20–11.8 ppm), as well as radiogenic Sr–Nd isotopes (εNd(t) = − 12.5 to − 9.2) and (⁸⁷Sr/⁸⁶Sr)_i = 0.7067 to 0.7086. In contrast, intrusions associated with Cu–Fe deposits are characterized by relatively high Sr/Y (35.0–81.3) and (La/Yb)_N (15.0–31.6) ratios, low Yb contents (1.00–1.62 ppm) without obvious Eu anomalies (δEu = 0.67–0.97), as well as (⁸⁷Sr/⁸⁶Sr)_i = 0.7055 to 0.7068 and εNd(t) = − 7.9 to − 3.4. Geochemical evidence indicates a greater contribution from the crust in intrusions associated with Fe skarn deposits than in intrusions associated with Cu–Fe skarn deposits. In the Edong ore district, the sulfides and sulfates in the Cu–Fe skarn deposits have sulfur isotope signatures that differ from those of Fe skarn deposits. The Cu–Fe skarn deposits have a narrow range of δ³⁴S values from − 6.2‰ to + 8.7‰ in sulfides, and + 13.2‰ to + 15.2‰ in anhydrite, while the Fe skarn deposits have a wide range of δ³⁴S values from + 10.3‰ to + 20.0‰ in pyrite and + 18.9‰ to + 30.8‰ in anhydrite. Sulfur isotope data for anhydrite and sedimentary country rocks suggest that the formation of skarns in the Edong district involved the interaction between magmatic fluids and variable amounts of evaporites in host rocks.     

Geology,geochronology and geochemistry of granitic intrusions and the related ores at the Hongshan Cu-polymetallic deposit: Insights into the Late Cretaceous post-collisional porphyry-related mineralization systems in the southern Yidun arc,SW China

The Hongshan Cu-polymetallic deposit is located in the southern Yidun arc in southwestern China, where both subduction-related (Late Triassic) and post-collisional (Late Cretaceous) porphyry–skarn–epithermal mineralization systems have been previously recognized. In this study, two distinct magmatic events, represented by diorite porphyry and quartz monzonite porphyry, have been revealed in the Hongshan deposit, with zircon SHRIMP U–Pb ages of 214 ± 2 Ma and 73.4 ± 0.7 Ma, respectively. The 73 Ma age is comparable to the Re–Os ages of 77 to 80 Ma of ore minerals from the Hongshan deposit, indicating that the mineralization is related to the Late Cretaceous quartz monzonite porphyries rather than Late Triassic diorite porphyries. The Late Triassic diorite porphyries belong to the high-K calc-alkaline series and show arc magmatic geochemical characteristics such as enrichment in Rb, Ba, Th and U and depletion in HFSEs, indicating that they were formed during the westward subduction of the Garzê–Litang Ocean. In contrast, the Late Cretaceous quartz monzonite porphyries show shoshonitic I-type geochemical characteristics, with high SiO₂, K₂O, LILE, low HREE, Y and Yb contents, and high LREE/HREE and La/Yb ratios. These geochemical characteristics, together with the Sr–Nd–Pb isotopic compositions (average (⁸⁷Sr/⁸⁶Sr)_i = 0.7085; ε_Nd(t) = − 6.0; ²⁰⁶Pb/²⁰⁴Pb = 19.064, ²⁰⁷Pb/²⁰⁴Pb = 15.738, ²⁰⁸Pb/²⁰⁴Pb = 39.733) suggest that the quartz monzonite porphyries originated from the partial melting of the ancient lower crust in response to underplating of mafic magma from subduction metasomatized mantle lithosphere, possibly triggered by regional extension in the post-collisional tectonic stage. The S isotopic compositions (δ³⁴S_V-CDT = 3.81‰ to 5.80‰) and Pb isotopic compositions (²⁰⁶Pb/²⁰⁴Pb = 18.014 to 18.809, ²⁰⁷Pb/²⁰⁴Pb = 15.550 to 15.785, and ²⁰⁸Pb/²⁰⁴Pb = 38.057 to 39.468) of ore sulfides indicate that the sulfur and metals were derived from mixed mantle and crustal sources. It is proposed that although the Late Triassic magmatic event is not directly related to mineralization, it contributed to the Late Cretaceous mineralization system through the storage of large amounts of sulfur and metals as well as water in the cumulate zone in the mantle lithosphere through subduction metasomatism. Re-melting of the mantle lithosphere including the hydrous cumulate zone and ancient lower crust during the post-collisional stage produced fertile magmas, which ascended to shallow depths to form quartz monzonite porphyries. Hydrothermal fluids released from the intrusions resulted in porphyry-type Mo–Cu ores in and near the intrusions, skarn-type Cu–Mo ores in the country rocks above the intrusions, and hydrothermal Pb–Zn ores in the periphery.     

Geochemical and isotopic variations in shallow groundwater in areas of the Fayetteville Shale development,north-central Arkansas

Exploration of unconventional natural gas reservoirs such as impermeable shale basins through the use of horizontal drilling and hydraulic fracturing has changed the energy landscape in the USA providing a vast new energy source. The accelerated production of natural gas has triggered a debate concerning the safety and possible environmental impacts of these operations. This study investigates one of the critical aspects of the environmental effects; the possible degradation of water quality in shallow aquifers overlying producing shale formations. The geochemistry of domestic groundwater wells was investigated in aquifers overlying the Fayetteville Shale in north-central Arkansas, where approximately 4000 wells have been drilled since 2004 to extract unconventional natural gas. Monitoring was performed on 127 drinking water wells and the geochemistry of major ions, trace metals, CH₄ gas content and its C isotopes (δ¹³C_CH4), and select isotope tracers (δ¹¹B, ⁸⁷Sr/⁸⁶Sr, δ²H, δ¹⁸O, δ¹³C_DIC) compared to the composition of flowback-water samples directly from Fayetteville Shale gas wells. Dissolved CH₄ was detected in 63% of the drinking-water wells (32 of 51 samples), but only six wells exceeded concentrations of 0.5 mg CH₄/L. The δ¹³C_CH4 of dissolved CH₄ ranged from −42.3‰ to −74.7‰, with the most negative values characteristic of a biogenic source also associated with the highest observed CH₄ concentrations, with a possible minor contribution of trace amounts of thermogenic CH₄. The majority of these values are distinct from the reported thermogenic composition of the Fayetteville Shale gas (δ¹³C_CH4 = −35.4‰ to −41.9‰). Based on major element chemistry, four shallow groundwater types were identified: (1) low (<100 mg/L) total dissolved solids (TDS), (2) TDS > 100 mg/L and Ca–HCO₃ dominated, (3) TDS > 100 mg/L and Na–HCO₃ dominated, and (4) slightly saline groundwater with TDS > 100 mg/L and Cl > 20 mg/L with elevated Br/Cl ratios (>0.001). The Sr (⁸⁷Sr/⁸⁶Sr = 0.7097–0.7166), C (δ¹³C_DIC = −21.3‰ to −4.7‰), and B (δ¹¹B = 3.9–32.9‰) isotopes clearly reflect water–rock interactions within the aquifer rocks, while the stable O and H isotopic composition mimics the local meteoric water composition. Overall, there was a geochemical gradient from low-mineralized recharge water to more evolved Ca–HCO₃, and higher-mineralized Na–HCO₃ composition generated by a combination of carbonate dissolution, silicate weathering, and reverse base-exchange reactions. The chemical and isotopic compositions of the bulk shallow groundwater samples were distinct from the Na–Cl type Fayetteville flowback/produced waters (TDS ∼10,000–20,000 mg/L). Yet, the high Br/Cl variations in a small subset of saline shallow groundwater suggest that they were derived from dilution of saline water similar to the brine in the Fayetteville Shale. Nonetheless, no spatial relationship was found between CH₄ and salinity occurrences in shallow drinking water wells with proximity to shale-gas drilling sites. The integration of multiple geochemical and isotopic proxies shows no direct evidence of contamination in shallow drinking-water aquifers associated with natural gas extraction from the Fayetteville Shale.     

Sicilian bottled natural waters: Major and trace inorganic components

Sixteen bottled waters of various Sicilian brands, 11 natural mineral waters and five normal drinking waters, were analyzed for major and trace inorganic components by ion chromatography (IC) and inductively coupled plasma-mass spectrometry (ICP-MS), respectively. The bottled waters represent a variety of water types with significantly different compositions in terms of salinity, major components and trace elements. Chemically, they range from Ca–HCO₃ and Ca–SO₄ to Na–HCO₃ types. Total dissolved solids ranges from 54 to 433 mg/L, total hardness from 25 to 238 mg/L CaCO₃, and measured Na content from 5.7 to 57 mg/L. According to total dissolved ions, all the bottled waters were classified as oligomineral (50 < TDS < 500 mg/L). All the bottled waters analyzed here had elemental concentrations which did not exceed the guideline and directive values, although a high concentration of Al was noted for one bottled water (O7, central Sicily) and high Rb and V in a bottled water (O1) from the Etna volcanic area. With regard to trace elements, the chemical quality of bottled waters was assessed by a metal index (MI). Chemical characteristics were compared with 10 tap water samples from private houses or public places, representative of the public water supply in Palermo, the largest and most densely populated city in Sicily. The municipal waters analyzed, belonging to HCO₃-alkaline earth and Cl–SO₄-alkaline earth waters, showed concentrations of chemical inorganic components well within drinking water limits. The data also indicated that the water supplied by the municipal authority is of fair quality, although fairly hard and high in Na concentration. Several considerations indicate that there is no sufficient reason to prefer bottled waters to tap waters.     

The role of evaporites in the formation of magnetite–apatite deposits along the Middle and Lower Yangtze River,China: Evidence from LA-ICP-MS analysis of fluid inclusions

Numerous magnetite–apatite deposits occur in the Ningwu and Luzong sedimentary basins along the Middle and Lower Yangtze River, China. These deposits are located in the contact zone of (gabbro)-dioritic porphyries with surrounding volcanic or sedimentary rocks and are characterized by massive, vein and disseminated magnetite–apatite ± anhydrite mineralization associated with voluminous sodic–calcic alteration. Petrologic and microthermometric studies on multiphase inclusions in pre- to syn-mineralization pyroxene and garnet from the deposits at Meishan (Ningwu basin), Luohe and Nihe (both in Luzong basin) demonstrate that they represent extremely saline brines (~ 90 wt.% NaCl_equiv) that were trapped at temperatures of about 780 °C. Laser ablation ICP-MS analyses and Raman spectroscopic studies on the natural fluid inclusions and synthetic fluid inclusions manufactured at similar P–T conditions reveal that the brines are composed mainly of Na (13–24 wt.%), K (7–11 wt.%), Ca (~ 7 wt.%), Fe (~ 2 wt.%), Cl (19–47 wt.%) and variable amounts of SO₄ (3–39 wt.%). Their Cl/Br, Na/K and Na/B ratios are markedly different from those of seawater evaporation brines and lie between those of magmatic fluids and sedimentary halite, suggesting a significant contribution from halite-bearing evaporites. High S/B and Ca/Na ratios in the fluid inclusions and heavy sulfur isotopic signatures of syn- to post-mineralization anhydrite (δ³⁴S_Anh = + 15.2 to + 16.9‰) and pyrite (δ³⁴S_Py = + 4.6‰ to + 12.1‰) further suggest a significant contribution from sedimentary anhydrite. These interpretations are in line with the presence of evaporite sequences in the lower parts of the sedimentary basins.The combined evidence thus suggests that the magnetite–apatite deposits along the Middle and Lower Yangtze River formed by fluids that exsolved from magmas that assimilated substantial amounts of Triassic evaporites during their ascent. Due to their Fe-oxide dominated mineralogy, their association with large-scale sodic–calcic alteration and their spatial and temporal associations with subvolcanic intrusions we interpret them as a special type of IOCG deposits that is characterized by unusually high contents of Na, Ca, Cl and SO₄ in the ore-forming fluids. Evaporite assimilation apparently led to the production of large amounts of high-salinity brine and thus to an enhanced capacity to extract iron from the (gabbro)-dioritic intrusions and to concentrate it in the form of ore bodies. Hence, we believe that evaporite-bearing sedimentary basins are more prospective for magnetite–apatite deposits than evaporite-free basins.     

Nakhlak carbonate-hosted Pb(Ag) deposit,Isfahan province,Iran: a geological,mineralogical, geochemical,fluid inclusion,and sulfur isotope study

The Upper Cretaceous Nakhlak epigenetic vein-type Pb(Ag) deposit is located 55 km northeast of the town of Anarak in Isfahan Province, Iran. The deposit contains 7 Mt of galena-barite ore with an average grade of 8.33% Pb, 0.38% Zn, and 72 ppm Ag. The ore mineralization occurs as stratabound, epigenetic, steeply dipping, east-west–trending veins in faulted- or fracture-controlled Upper Cretaceous Sadar carbonates. Galena and barite are the primary minerals. Minor sphalerite, tennantite-tetrahedrite, pyrite, and chalcopyrite occur as inclusions in galena. Cerussite with minor amounts of anglesite and plattnerite formed in the oxidized supergene zone. The ore and ore-related minerals were deposited in the hydrothermally dolomitized carbonate host rock containing saddle-shaped dolomite. Geochemically, the dolomitized carbonate host rocks are enriched in MgO, Fe₂O₃, MnO, Pb, Zn, and Ba, but depleted in CaO. The galena concentrate contains high values of Ag (932 ppm), Sb (342 ppm), Cu (422 ppm), As (91 ppm), and Zn (296 ppm); the presence of these trace elements indicates a low-temperature type of galena mineralization. This interpretation is corroborated by fluid inclusions containing 12.98 wt.% NaCl equivalent salinity; the inclusions homogenize at the low temperature of about 152.1 °C. The similarity between δ³⁴S_(V-CDT) values in Nakhlak barite and Permian–Triassic δ³⁴S marine sulfate values indicates that the Nakhlak sulfur was probably provided from evaporates of Permian–Triassic age. The δ³⁴S_(V-CDT) values of galena and barite samples occupy the ranges of − 1.04‰ to + 8.62‰ and + 10.95‰ to + 13.71‰, respectively, and are similar to Mississippi Valley–type (MVT) deposits. The low-temperature basinal fluids, evaporate-originated sulfur, and fault- or fracture-controlled galena-rich veins in the Nakhlak deposit resemble the type of geological features documented in Pb-rich MVT deposits.     

Effects of acid-sulfate weathering and cyanide-containing gold tailings on the transport and fate of mercury and other metals in Gossan Creek: Murray Brook mine,New Brunswick,Canada

Gossan Creek, a headwater stream in the SE Upsalquitch River watershed in New Brunswick, Canada, contains elevated concentrations of total Hg (Hg_T up to 60 μg/L). Aqueous geochemical investigations of the shallow groundwater at the headwaters of the creek confirm that the source of Hg is a contaminated groundwater plume (neutral pH with Hg and Cl concentrations up to 150 μg/L and 20 mg/L, respectively), originating from the Murray Brook mine tailings, that discharges at the headwaters of the creek. The discharge area of the contaminant plume was partially delineated based on elevated pH and Cl concentrations in the groundwater. The local groundwater outside of the plume contains much lower concentrations of Hg and Cl (<0.1 μg/L and 3.8 mg/L, respectively) and displays the chemical characteristics of an acid-sulfate weathering system, with low pH (4.1–5.5) and elevated concentrations of Cu, Zn, Pb and SO₄ (up to 5400 μg Cu/L, 8700 μg Zn/L, 70 μg Pb/L and 330 mg SO₄/L), derived from oxidation of sulfide minerals in the Murray Brook volcanogenic massive sulfide deposit and surrounding bedrock. The Hg_T mass loads measured at various hydrologic control points along the stream system indicate that 95–99% of the dissolved Hg_T is attenuated in the first 3–4 km from the source. Analyses of creek bed sediments for Au, Ag, Cu, Zn, Pb and Hg indicate that these metals have partitioned strongly to the sediments. Mineralogical investigations of the contaminated sediments using analytical scanning electron microscopy (SEM), transmission electron microscopy (TEM) and scanning transmission electron microscopy (STEM), reveal discrete particles (<1–2 μm) of metacinnabar (HgS), mixed Au–Ag–Hg amalgam, Cu sulfide and Ag sulfide.     

Synthesis and characterization of polycrystalline KAlSi3O8 hollandite [liebermannite]: Sound velocities vs. pressure to 13 GPa at room temperature

A polycrystalline specimen of liebermannite [KAlSi₃O₈ hollandite] was synthesized at 14.5 GPa and 1473 K using glass starting material in a uniaxial split-sphere apparatus. The recovered specimen is pure tetragonal hollandite [SG: I4/m] with bulk density of within 98% of the measured X-ray value. The specimen was also characterized by Raman spectroscopy and nuclear magnetic resonance spectroscopy. Sound velocities in this specimen were measured by ultrasonic interferometry to 13 GPa at room T in a uniaxial split-cylinder apparatus using Al₂O₃ as a pressure marker. Finite strain analysis of the ultrasonic data yielded K_S0 = 145(1) GPa, K₀′ = 4.9(2), G₀ = 92.3(3) GPa, G₀′ = 1.6(1) for the bulk and shear moduli and their pressure derivatives, corresponding to V_P0 = 8.4(1) km/s, V_S0 = 4.9(1) km/s for the sound wave velocities at room temperature. These elasticity data are compared to literature values obtained from static compression experiments and theoretical density functional calculations.     

The sources of ore-forming material in the low-sulfidation epithermal Wulaga gold deposit,NE China: Constraints from S,Pb isotopes and REE pattern

The Wulaga gold deposit, located in Heilongjiang province, NE China, is a subvolcanic rock-hosted, low-sulfidation epithermal gold deposit, and has an Au reserve of about 84 tons. The gold mineralization occurs in a crypto-explosive breccia, and is spatially and temporally associated with an Early Cretaceous granodioritic porphyry. Three individual stages of mineralization have been identified in the Wulaga gold deposit: an early white quartz-euhedral vein stage, a fine-grained pyrite–marcasite–stibnite–chalcedony stage, and a late calcite–pyrite stage. The sulfur isotopic values of sulfide minerals vary in a wide range from − 4 to 4.9‰, but are concentrated in the range of − 3 to 0‰, implying that sulfur in the hydrothermal fluids was derived from magmatic volatiles. Lead isotopic results of the granodioritic porphyry (²⁰⁶Pb/²⁰⁴Pb = 18.341–18.395, ²⁰⁷Pb/²⁰⁴Pb = 15.507–15.523, ²⁰⁸Pb/²⁰⁴Pb = 38.174–38.251) and sulfide minerals (²⁰⁶Pb/²⁰⁴Pb = 18.172–18.378, ²⁰⁷Pb/²⁰⁴Pb = 15.536–15.600, ²⁰⁸Pb/²⁰⁴Pb = 38.172–38.339) are comparatively consistent and clustered together between the orogenic and upper mantle lines, indicating the lead in the ores is closely related to the parent magma of the granodioritic porphyry. The REE patterns of fluid inclusions trapped in sulfides are similar to those of the granodioritic porphyry, which confirms the magmatic origin of the REE in the hydrothermal fluids. The characteristics of S and Pb isotopes and REE suggest that the ore-forming materials of the Wulaga gold deposit are partly magmatic in origin, and related to a high-level hydrous granodioritic magma.     

Kinetics of selenium release in mine waste from the Meade Peak Phosphatic Shale,Phosphoria Formation,Wooley Valley,Idaho, USA

Phosphorite from the Meade Peak Phosphatic Shale member of the Permian Phosphoria Formation has been mined in southeastern Idaho since 1906. Dumps of waste rock from mining operations contain high concentrations of Se which readily leach into nearby streams and wetlands. While the most common mineralogical residence of Se in the phosphatic shale is elemental Se, Se(0), Se is also an integral component of sulfide phases (pyrite, sphalerite and vaesite–pyrite_ss) in the waste rock. It may also be present as adsorbed selenate and/or selenite, and FeSe₂ and organo-selenides.Se release from the waste rock has been observed in field and laboratory experiments. Release rates calculated from waste rock dump and column leachate solutions describe the net, overall Se release from all of the possible sources of Se listed above. In field studies, Se concentration in seepage water (pH 7.4–7.8) from the Wooley Valley Unit 4 dump ranges from 3600 µg/L in May to 10 µg/L by Sept. Surface water flow, Q, from the seep also declines over the summer, from 2 L/s in May to 0.03 L/s in Sept. Se flux ([Se] ? Q) reaches a steady-state of < 150 mg/day in 1–4 months, depending upon the volume of Q. Se release (mg/L) follows a first order reaction with a rate constant, k, = 1.35 – 6.35e?3 h^? 1 (11.8–55.6 yr^? 1).Laboratory experiments were performed with the waste shale in packed bed reactors; residence time varied from 0.09 to 400 h and outlet pH ～ 7.5. Here, Se concentration increased with increasing residence time and release was modeled with a first order reaction with k = 2.19e?3 h^? 1 (19.2 yr^? 1).Rate constants reported here fall within an order of magnitude of reported rate constants for oxidation of Se(0) formed by bacterial precipitation. This similarity among rate constants from both field and laboratory studies combined with the direct observation of Se(0) in waste shales of the Phosphoria Formation suggests that oxidation of Se(0) may control steady-state Se concentration in water draining the Wooley Valley waste dump.     

Mechanisms controlling acid neutralization and metal mobility within a Ni-rich tailings impoundment

Low-quality pore waters containing high concentrations of dissolved H⁺, SO₄, and metals have been generated in the East Tailings Management Area at Lynn Lake, Manitoba, as a result of sulfide-mineral oxidation. To assess the abundance, distribution, and solid-phase associations of S, Fe, and trace metals, the tailings pore water was analyzed, and investigations of the geochemical and mineralogical characteristics of the tailings solids were completed. The results were used to delineate the mechanisms that control acid neutralization, metal release, and metal attenuation. Migration of the low-pH conditions through the vadose zone is limited by acid-neutralization reactions, resulting in the development of distinct pore-water pH zones at depth; the neutralization reactions involve carbonate (pH ⩾ 5.7), Al-hydroxide (pH ⩾ 4.0), and aluminosilicate solids. As the zone of low-pH pore water expands, the pH will then be primarily controlled by less soluble solids, such as Fe(III) oxyhydroxides (pH < 3.5) and the relatively more recalcitrant aluminosilicates (pH ⩾ 1.3). Precipitation/dissolution reactions involving secondary Fe(III) oxyhydroxides and hydroxysulfates control the concentrations of dissolved Fe(III). Concentrations of dissolved SO₄ are principally controlled by the formation of gypsum and jarosite. Geochemical extractions indicate that the solid-phase concentrations of Ni, Co, and Zn are associated predominantly with reducible and acid-soluble fractions. The concentrations of dissolved trace metals are therefore primarily controlled by adsorption/complexation and (or) co-precipitation/dissolution reactions involving secondary Fe(III) oxyhydroxide and hydroxysulfate minerals. Concentrations of dissolved metals with relatively low mobility, such as Cu, are also controlled by the precipitation of discrete minerals. Because the major proportion of metals is sequestered through adsorption and (or) co-precipitation, the metals are susceptible to remobilization if low-pH or reducing conditions develop within the tailings.     

Geological and isotopic constraints on the origin of the Anle carbonate-hosted Zn–Pb deposit in northwestern Yunnan Province,SW China

The Anle Zn–Pb deposit, hosted by Upper Cambrian dolostone, is located in the southern Songpan–Ganzi Block in southwest China. In this deposit, ore bodies occur as stratiform lenses and consist of galena, sphalerite and pyrite as ore minerals, and quartz, dolomite and calcite as gangue minerals. The mineralization shows mainly vein, banded and brecciated structures. Four ore bodies have been found in the Anle deposit, with a combined 2.0 million tonnes (Mt) of sulfide ores at average grades of 1.64 wt.% Pb, 6.64 wt.% Zn and 45 g/t Ag. Brown, brownish-yellow and yellow sphalerite samples have δ⁶⁶Zn values ranging from + 0.08 to + 0.10‰ (average + 0.09‰, n = 3), + 0.12 to + 0.38‰ (average + 0.24‰, n = 8) and + 0.40 to + 0.50‰ (average + 0.46‰, n = 3), respectively. We interpret the progressively heavier Zn isotopes from brown to yellow sphalerite as being led by kinetic Raleigh fractional crystallization. Calcite samples have δ¹³C_PDB and δ¹⁸O_SMOW values ranging from − 4.8 to − 0.2‰ (average − 1.7‰, n = 7) and + 17.9 to + 21.4‰ (average + 19.6‰, n = 7), respectively. Whole-rock δ¹³C_PDB and δ¹⁸O_SMOW values of the Cambrian ore-hosting dolostone range from + 0.1 to + 1.1‰ (average + 0.6‰, n = 3) and + 23.2 to + 24.1‰ (average + 23.6‰, n = 3), respectively. This suggests that carbon in the ore-forming fluids was provided by the host dolostone through carbonate dissolution. δ³⁴S_CDT values of sulfide samples range between − 1.3‰ and + 17.8‰ with an average value of + 6.3‰ (n = 25), lower than evaporites (such as barite + 19.8‰) in the overlaying Lower Ordovician sedimentary strata. The data suggest that sulfur in the hydrothermal fluids were derived from evaporites by thermo-chemical sulfate reduction (TSR). ²⁰⁶Pb/²⁰⁴Pb, ²⁰⁷Pb/²⁰⁴Pb and ²⁰⁸Pb/²⁰⁴Pb ratios for sulfide minerals range from 17.63 to 17.86, 15.58 to 15.69 and 37.62 to 37.95, respectively. The data are similar to those of the age-corrected Cambrian ore-hosting dolostone (²⁰⁶Pb/²⁰⁴Pb = 17.70–17.98, ²⁰⁷Pb/²⁰⁴Pb = 15.58–15.65 and ²⁰⁸Pb/²⁰⁴Pb = 37.67–38.06), but lower than those of age-corrected Ordovician sandstone and slate (²⁰⁶Pb/²⁰⁴Pb = 18.54–19.58, ²⁰⁷Pb/²⁰⁴Pb = 15.73–15.81 and ²⁰⁸Pb/²⁰⁴Pb = 38.44–39.60). This indicates that ore Pb was most likely to be derived from the Cambrian ore-hosting dolostone. Therefore, our new geological and isotopic evidence suggests that the Anle Zn–Pb deposit is best classified to be an epigenetic carbonate-hosted Mississippi Valley-type (MVT) deposit.