Interactions and connectivity between runoff generation processes of different spatial scales

Monitoring runoff generation processes in the field is a prerequisite for developing conceptual hydrological models and theories. At the same time, our perception of hydrological processes strongly depends on the spatial and temporal scale of observation. Therefore, the aim of this study is to investigate interactions between runoff generation processes of different spatial scales (plot scale, hillslope scale, and headwater scale). Different runoff generation processes of three hillslopes with similar topography, geology and soil properties, but differences in vegetation cover (grassland, coniferous forest, and mixed forest) within a small v‐shaped headwater were measured: water table dynamics in wells with high spatial and temporal resolution, subsurface flow (SSF) of three 10 m wide trenches at the bottom of the hillslopes subdivided into two trench sections each, overland flow at the plot scale, and catchment runoff. Bachmair et al. ( 2012 ) found a high spatial variability of water table dynamics at the plot scale. In this study, we investigate the representativity of SSF observations at the plot scale versus the hillslope scale and vice versa, and the linkage between hillslope dynamics (SSF and overland flow) and streamflow. Distinct differences in total SSF within each 10 m wide trench confirm the high spatial variability of the water table dynamics. The representativity of plot scale observations for hillslope scale SSF strongly depends on whether or not wells capture spatially variable flowpaths. At the grassland hillslope, subsurface flowpaths are not captured by our relatively densely spaced wells (3 m), despite a similar trench flow response to the coniferous forest hillslope. Regarding the linkage between hillslope dynamics and catchment runoff, we found an intermediate to high correlation between streamflow and hillslope hydrological dynamics (trench flow and overland flow), which highlights the importance of hillslope processes in this small watershed. Although the total contribution of SSF to total event catchment runoff is rather small, the contribution during peak flow is moderate to substantial. Additionally, there is process synchronicity between spatially discontiguous measurement points across scales, potentially indicating subsurface flowpath connectivity. Our findings stress the need for (i) a combination of observations at different spatial scales, and (ii) a consideration of the high spatial variability of SSF at the plot and hillslope scale when designing monitoring networks and assessing hydrological connectivity. Copyright © 2013 John Wiley & Sons, Ltd.     

Changes to sediment sources following wildfire in a forested upland catchment,southeastern Australia

Few investigations link post‐fire changes to sediment sources and erosion processes with sediment yield response at the catchment scale. This linkage is essential if downstream impacts on sediment transport after fire are to be understood in the context of fire effects across different forest environments. In this study, we quantify changing source contributions to fine sediment (<63 µm) exported from a eucalypt forest catchment (136 ha) burnt by wildfire. The study catchment is one of a pair of research catchments located in the East Kiewa River valley in southeastern Australia that have been the subject of a research program investigating wildfire effects on runoff, erosion, and catchment sediment/nutrient exports. This previous research provided the opportunity to couple insights gained from a range of measurement techniques with the application of fallout radionuclides ¹³⁷Cs and ²¹⁰Pb_ex to trace sediment sources. It was found that hillslope surface erosion dominated exports throughout the 3·5‐year post‐fire measurement period. During this time there was a pronounced decline in the proportional surface contribution from close to 100% in the first six months to 58% in the fourth year after fire. Over the study period, hillslope surface sources accounted for 93% of the fine sediment yield from the burnt catchment. The largest decline in the hillslope contribution occurred between the first and second years after fire, which corresponded with the previously reported large decline in sediment yield, breakdown of water repellency in burnt soils, substantial reduction in hillslope erodibility, and rapid surface vegetation recovery. Coupling the information on sediment sources with hillslope process measurements indicated that only a small proportion of slopes contributed sediment to the catchment outlet, with material derived from near‐channel areas dominating the post‐fire catchment sediment yield response. Copyright © 2011 John Wiley & Sons, Ltd.     

Throughflow variability during snowmelt in a forested mountain catchment,coastal British Columbia,Canada

This study documented the spatial and temporal variability of outflow from a forested hillslope segment during snowmelt at a small mountain catchment in south coastal British Columbia, Canada. A pit 5 m wide was established just upslope from the stream channel. Outflow from the organic horizon was intercepted and measured by a single trough, and outflow from the mineral horizons was measured separately for three adjacent sections. Throughflow exhibited non‐steady‐state behaviour involving shifting allocations of flow amongst different sections of the outflow pit, as well as threshold effects and hysteresis in the relationship between pit outflow and water table elevation. Most of the pit outflow originated from the mineral horizons, indicating that throughflow was the dominant pathway by which water was delivered to the stream channel. Direct precipitation and snowmelt onto near‐stream saturated areas can account for less than 20% of the total outflow from the hillslope segment. Throughflow from the mineral sections consistently peaked either at the same time as or earlier than stream flow from the 150‐ha catchment during diurnal snowmelt cycles, indicating that throughflow appears to respond rapidly enough to contribute to snowmelt‐induced peak stream flow. Pit outflow cannot be extrapolated reliably to the catchment scale on the basis of simple length‐ or area‐based ratios. Copyright © 2004 John Wiley & Sons, Ltd.     

Lumped hysteretic model for subsurface stormflow developed using downward approach

The terms ‘downward’ and ‘upward’ (synonymous with ‘top‐down’ and ‘bottom‐up’ respectively) are sometimes used when describing methods for developing hydrological models. A downward approach is used here to develop a lumped catchment‐scale model for subsurface stormflow at the 0·94 km² Slapton Wood catchment. During the development, as few assumptions as possible are made about the behaviour of subsurface stormflow at the catchment scale, and no assumptions are made about its behaviour at smaller scales. (In an upward approach, in contrast, the modelling would be based on assumptions about, and data for, the behaviour at smaller scales, such as the hillslope, plot, and point scales.) The model has a single store with a relatively simple relationship between discharge and storage, based on equations describing hysteretic patterns seen in a graph of discharge against storage. Double‐peaked hydrographs have been observed at the catchment outlet. Rainfall on the channel and infiltration‐excess and saturation‐excess runoff give a rapid response, and shallow subsurface stormflow gives a delayed response. Hydrographs are successfully simulated for the large delayed responses observed in 1971–1980 and 1989–1991, then a lumped model for the rapid response is coupled to the lumped hysteretic model and some double‐peaked hydrographs simulated. A physical interpretation is developed for the lumped hysteretic model, making use of information on patterns of perched saturation observed in 1982 on a hillslope at the Slapton Wood catchment. Downward and upward approaches are complementary, and the most robust way to develop and improve lumped catchment models is to iterate between downward and upward steps. Possible next steps are described. Copyright © 2006 John Wiley & Sons, Ltd.     

The impact of upland land management on flooding: results from an improved pasture hillslope

In response to growing concern about impacts of upland agricultural land management on flood risk, an intensely instrumented experimental catchment has been established at Pontbren, a sheep‐farmed headwater catchment of the River Severn, UK. Primary aims are to develop understanding of the processes governing flood generation and the associated impacts of land management practices, and to bridge the gap between process understanding and ability to predict effects on downstream flooding. To achieve this, the experiment is designed to operate at plot (～100 m²), hillslope (～0·1 km²) and small catchment scale (～10 km²). Hillslope‐scale data, from an under‐drained, agriculturally ‘improved’ pasture, show that drain flow is a dominant runoff process. However, depending on antecedent moisture conditions, overland flow may exceed drain flow rates and can be an important contributor to peak flow runoff at the hillslope‐scale. Flow, soil tension data and tracer tests confirm the importance of macropores and presence of perched water tables under ‘normal’ wet conditions. Comparisons of pasture runoff with that from within a 10 year‐old tree shelterbelt show significantly reduced overland flow due to the presence of trees and/or absence of sheep. Comparisons of soil hydraulic properties show significant increases in hydraulic conductivity and saturated moisture content of soil under trees compared to adjacent improved pasture. Copyright © 2008 John Wiley & Sons, Ltd.     

Sediment and fluvial particulate carbon flux from an eroding peatland catchment

Erosion and the associated loss of carbon is a major environmental concern in many peatlands and remains difficult to accurately quantify beyond the plot scale. Erosion was measured in an upland blanket peatland catchment (0.017 km²) in northern England using structure-from-motion (SfM) photogrammetry, sediment traps and stream sediment sampling at different spatial scales. A net median topographic change of –27 mm yr^–1 was recorded by SfM over the 12-month monitoring period for the entire surveyed area (598 m²). Within the entire surveyed area there were six nested catchments where both SfM and sediment traps were used to measure erosion. Substantial amounts of peat were captured in sediment traps during summer storm events after two months of dry weather where desiccation of the peat surface occurred. The magnitude of topographic change for the six nested catchments determined by SfM (mean value: 5.3 mm, standard deviation: 5.2 mm) was very different to the areal average derived from sediment traps (mean value: –0.3 mm, standard deviation: 0.1 mm). Thus, direct interpolation of peat erosion from local net topographic change into sediment yield at the catchment outlet appears problematic. Peat loss measured at the hillslope scale was not representative of that at the catchment scale. Stream sediment sampling at the outlet of the research catchment (0.017 km²) suggested that the yields of suspended sediment and particulate organic carbon were 926.3 t km^–2 yr^–1 and 340.9 t km^–2 yr^–1, respectively, with highest losses occurring during the autumn. Both freeze–thaw during winter and desiccation during long periods of dry weather in spring and summer were identified as important peat weathering processes during the study. Such weathering was a key enabler of subsequent fluvial peat loss from the catchment. © 2019 John Wiley & Sons, Ltd.     

Are spatial patterns of soil moisture at plot scales generalisable across catchments,climates, and other characteristics? A synthesis of synoptic soil moisture across the Mid-Atlantic

The spatial variation of soil moisture over very small areas (<100 m²) can have nonlinear impacts on cycling and flux rates resulting in bias if it is not considered, but measuring this variation is difficult over extensive temporal and spatial scales. Most studies examining spatial variation of soil moisture were conducted at hillslope (0.01 km²) to multi-catchment spatial scales (1000 km²). They found the greatest variation at mid wetness levels and the smallest variation at wet and dry wetness levels forming a concave down relationship. There is growing evidence that concave down relationships formed between spatial variation of soil moisture and average soil moisture are consistent across spatial scales spanning several orders of magnitude, but more research is needed at very small, plot scales (<100 m²). The goal of this study was to characterise spatial variation in shallow soil moisture at the plot scale by relating the mean of measurements collected in a plot to the standard deviation (SD). We combined data from a previous study with thousands of new soil moisture measurements from 212 plots in eight catchments distributed across the US Mid-Atlantic Region to (1) test for a generalisable mean–SD relationship at plot scales, (2) characterise how landcover, land use, season, and hillslope position contribute to differences in mean–SD relationships, and (3) use these generalised mean–SD relationships to quantify their impacts on catchment scale nitrification and denitrification potential. Our study found that 98% of all measurements formed a generalised mean–SD relationship like those observed at hillslope and catchment spatial scales. The remaining 2% of data comprised a mean–SD relationship with greater spatial variation that originated from two riparian plots reported in a previous study. Incorporating the generalised mean–SD relationship into estimates of nitrification and denitrification potential revealed strong bias that was even greater when incorporating mean–SD observations from the two riparian plots with significantly greater spatial variation.     

Estimating the deep seepage component of the hillslope and catchment water balance within a measurement uncertainty framework

Deep seepage is a term in the hillslope and catchment water balance that is rarely measured and usually relegated to a residual in the water balance equation. While recent studies have begun to quantify this important component, we still lack understanding of how deep seepage varies from hillslope to catchment scales and how much uncertainty surrounds its quantification within the overall water balance. Here, we report on a hillslope water balance study from the H. J. Andrews Experimental Forest in Oregon aimed at quantifying the deep seepage component where we irrigated a 172‐m² section of hillslope for 24·4 days at 3·6 ± 3 mm/h. The objective of this experiment was to close the water balance, identifying the relative partitioning of, and uncertainties around deep seepage and the other measured water balance components of evaporation, transpiration, lateral subsurface flow, bedrock return flow and fluxes into and out of soil profile storage. We then used this information to determine how the quantification of individual water balance components improves our understanding of key hillslope processes and how uncertainties in individual measurements propagate through the functional uses of the measurements into water balance components (i.e. meteorological measurements propagated through potential evapotranspiration estimates). Our results show that hillslope scale deep seepage composed of 27 ± 17% of applied water. During and immediately after the irrigation experiment, a significant amount of the irrigation water could not be accounted for. This amount decreased as the measurement time increased, declining from 28 ± 16% at the end of the irrigation to 20 ± 21% after 10 days drainage. This water is attributed to deep seepage at the catchment scale. Copyright © 2010 John Wiley & Sons, Ltd.     

Monitoring spatial variability of forest interception

Field instrumentation was designed and installed to quantify the influence of forest interception on the spatial and temporal distribution of water flux onto and into the forest soil at the plot scale. An application is presented which demonstrates that the instrumentation has the required resolution to monitor the spatial variability and dynamics of the flux processes. The observations show that spatial variability of interception may play an important role, not only in small scale soil moisture heterogeneity, but also in the hydrological response of a forested catchment at the hillslope scale. They also highlight the need of gathering more field information on the effects of vegetation on the spatial variability of soil surface water input.     

The roles of channels and hillslopes in rainfall/run‐off lag times during intense storms in a steep catchment

The response time (lag time) between rainfall input and run‐off output in headwater catchments is a key parameter for flood prediction. Lag times are expected to be controlled by run‐off processes, both on hillslopes and in channels. To demonstrate these effects on peak lag times within a 4.5‐km² catchment, we measured stream water levels at up to 16 channel locations at 1‐min intervals and compared the lag times with topographic indices describing the length and gradient of the hillslope and channel flow path. We captured storm events with a total precipitation of 38–198 mm and maximum hourly precipitation intensity of 9–90 mm/hr. There were positive relationships between lag time and flow path length as well as the ratio of the flow path length and the square root of the gradient of channels for the most intense storms, demonstrating that channel flow paths generally defined the variation in lag times. Topographic analysis showed that hillslope flow path lengths were similar among locations, whereas channel flow path length increased almost one order of magnitude with a 100‐fold increase in catchment area. Thus, the relative importance of hillslope flow path decreased with increasing catchment area. Our results indicate that the variation in lag times is small when hillslopes are sufficiently wet; thus, catchment‐scale variation in lag times can be explained almost entirely by channel processes. Detailed topographic channel information can improve prediction of flood peak timing, whereas hillslopes can be treated as homogeneous during large flood events.     

Consistency between hydrological models and field observations: linking processes at the hillslope scale to hydrological responses at the watershed scale

The purpose of this paper is to identify simple connections between observations of hydrological processes at the hillslope scale and observations of the response of watersheds following rainfall, with a view to building a parsimonious model of catchment processes. The focus is on the well‐studied Panola Mountain Research Watershed (PMRW), Georgia, USA. Recession analysis of discharge Q shows that while the relationship between dQ/dt and Q is approximately consistent with a linear reservoir for the hillslope, there is a deviation from linearity that becomes progressively larger with increasing spatial scale. To account for these scale differences conceptual models of streamflow recession are defined at both the hillslope scale and the watershed scale, and an assessment made as to whether models at the hillslope scale can be aggregated to be consistent with models at the watershed scale. Results from this study show that a model with parallel linear reservoirs provides the most plausible explanation (of those tested) for both the linear hillslope response to rainfall and non‐linear recession behaviour observed at the watershed outlet. In this model each linear reservoir is associated with a landscape type. The parallel reservoir model is consistent with both geochemical analyses of hydrological flow paths and water balance estimates of bedrock recharge. Overall, this study demonstrates that standard approaches of using recession analysis to identify the functional form of storage–discharge relationships identify model structures that are inconsistent with field evidence, and that recession analysis at multiple spatial scales can provide useful insights into catchment behaviour. Copyright © 2008 John Wiley & Sons, Ltd.     

Multi-scale permeability estimation for a tropical catchment

Physically based and spatially distributed modelling of catchment hydrology involves the estimation of block or whole-hillslope permeabilities. Invariably these estimates are derived by calibration against rainfall–runoff response. Rarely are these estimates rigorously compared with parameter measurements made at the small scale. This study uses a parametrically simple model, TOPMODEL, and an uncertainty framework to derive permeability at the catchment scale. The utility of expert knowledge of the internal catchment dynamics (i.e. extent of saturated area) in constraining parameter uncertainty is demonstrated. Model-derived estimates are then compared with core-based measurements of permeability appropriately up-scaled. The observed differences between the permeability estimates derived by the two methods might be attributed to the role of intermediate scale features (natural soil pipes). An alternative method of determining block permeabilities at the intermediate or hillslope scale is described. This method uses pulse-wave tests and explicitly incorporates the resultant effects of phenomena such as soil piping and kinematic wave migration. The study aims to highlight issues associated with parameterizing or validating distributed models, rather than to provide a definitive solution. The fact that the permeability distribution within the Borneo study catchment is comparatively simple, assists the comparisons. The field data were collected in terrain covered by equatorial rainforest. Combined field measurement and modelling programmes are rare within such environments. © 1998 John Wiley & Sons, Ltd.     

Throughflow variability on a forested hillslope underlain by compacted glacial till

This study examined the spatial and temporal variability of throughflow in a shallow forest oil in terms of the controls exerted by topography, soil properties and the shape of the water table. Hillslope outflow was measured at nine troughs installed at a road cut, and hydraulic head was measured at 37 piezometers installed to the confining till surface at the base of the soil. At the lowest flows, the distribution of throughflow across the hillslope conformed reasonably to the distribution of upslope contributing area computed from the topography of the confining basal till layer. At higher flows, however, the distribution of throughflow shifted, partly as a result of changes in the orientation in flow tubes as the piezometric surface changed. At high flows, surface topography appeared to provide a reasonable proxy for the shape of the water table. Shunting of water through discrete macropores, however, can apparently overwhelm topographic controls on throughflow, at least for slope widths less than about 10 m. Effective hydraulic conductivities computed at the scale of the troughs varied over two orders of magnitude and displayed no consistent relationship with the thickness of the saturated layer. Estimates at the plot scale (c. 10 m hillslope width) were far less variable, and for higher flows displayed an approximately linear relationship with saturated zone thickness. Copyright © 2000 John Wiley & Sons, Ltd.     

Effects of hillslope topography on runoff response in a small catchment in the Fudoji Experimental Watershed,central Japan

We investigated the role of different hillslope units with different topographic characteristics on runoff generation processes based on field observations at two types of hillslopes (0·1 ha): a valley‐head (a convergent hillslope) and a side slope (a planar hillslope), as well as at three small catchments having two types of slopes with different drainage areas ranging from 1·9 to 49·7 ha in the Tanakami Mountains, central Japan. We found that the contribution of the hillslope unit type to small catchment runoff varied with the magnitude of rainfall. When the total amount of rainfall for a single storm event was < 35 mm, runoff in the small catchment was predominantly generated from the side slope. As the amount of rainfall increased (>35 mm), the valley‐head also began to contribute to the catchment runoff, adding to runoff from the side slope. Although the direct runoff from the valley‐head was greater than that from the side slope, the contribution from the side slope was quantitatively greater than that from the valley‐head due to the proportionally larger area occupied by the side slope in the small catchment. The storm runoff responses of the small catchments reflected the change in the runoff components of each hillslope unit as the amount of rainfall increased and rainfall patterns changed. However, similar runoff responses were found for the small catchments with different areas. The similarity of the runoff responses is attributable to overlay effects of different hillslope units and the similar composition ratios of the valley‐head and side slope in the catchments. This study suggests that the relative roles of the valley‐head and side slope are important in runoff generation and solute transport as the catchment size increases from a hillslope/headwater to a small catchment. Copyright © 2011 John Wiley & Sons, Ltd.     

Stormflow generation and flowpath characteristics in an Amazonian rainforest catchment

The Amazon basin covers an area of roughly 7 × 10⁶ km² and encompasses diverse soil – landscape types with potentially differing hydrological behaviour. This study was conducted in the Ultisol landscape of the western Amazon basin in Peru. Processes of stormflow generation were investigated on an event basis in a first‐order rainforest catchment to establish a causal link between soil physical and precipitation characteristics, hillslope flowpaths and stormflow hydrograph attributes. A sharp decrease in soil hydraulic conductivity with depth and high rainfall intensity and frequency favour rapid near‐surface flowpaths, mainly in the form of saturation‐excess overland flow and return flow. The latter results in an almost random occurrence of overland flow, with no obvious topographic control. Hillslope flowpaths do not vary much with respect to the hydrograph attributes time of rise, response time, lag time and centroid lag time. They have the same response time as streamflow, but a somewhat lower time of rise and significantly shorter lag times. The recession constant for hillslope hydrographs is about 10 min, in contrast to the streamflow recession constants of 28, 75 and 149 min. Stormflow generation in this Ultisol rainforest catchment differs strongly from that reported for Oxisol rainforest catchments. These two soilscapes may define a spectrum of possible catchment hydrological behaviour in the Amazon basin. Copyright © 2000 John Wiley & Sons, Ltd.     

Using hydro‐chemograph analyses to reveal runoff generation processes in a Mediterranean catchment

The paper deals with the hydro‐chemical analysis performed in order to reveal processes, sources, paths and timing of the runoff generation in an experimental catchment representative of the hilly, terrigenous and forested watershed in the Mediterranean humid eco‐region of southern Italy. The analysis is based on the data recorded at the outlet of the catchment during 2013–2014. A mixing law procedure was applied on discharge (Q) and electrical conductivity (EC) data, by using the Q–EC end members previously collected at selected groundwater, sub‐surficial and surficial stations. In this way, we found four bound curves delimiting fields in a Q–EC plot, each with hydro‐chemograph value ranges. At annual time scale, the analysis revealed a seasonal behaviour of the hydrological response, different for the wet period, when the aquifer is recharging, and the dry periods, when the aquifer is discharging, despite frequent summer rain showers. At event time scale, the catchment seems to show the behaviour of a typical hydro‐geomorphic threshold system. We interpreted this behaviour as due to a progressive addition of water from distinctive components (i.e. deep aquifer, riparian corridor, hillslope and hollow), each with originally different mechanisms of runoff production (i.e. groundwater, groundwater ridging, saturation excess, infiltration excess and soil pipe exfiltration) and response time. During the event, the contributing areas enlarge upward the riparian corridors and the zero‐order basins, where the aforementioned components become superposed and the mechanisms interact more and more. We hypothesize that the threshold values between different states of the system are defined by the intersections of the boundary curves on the Q–EC plot. Different patterns in the Q–EC hysteretic cycles are prevalently related to the pre‐event soil saturation and groundwater contributions to stormflow and recharge mechanisms. Copyright © 2016 John Wiley & Sons, Ltd.     

Quantifying hydrological budgets and pathways in a small upland catchment using a combined modelling and tracer approach

Hydrological budgets and flow pathways have been quantified for a small upland catchment (1.76 km²) in the northeast of Scotland. Water balance calculations for four subcatchments identified spatial variability within the catchment, with an estimated runoff enhancement of up to 25% for the upper western area, compared with the rest of the catchment. Data from spatial hydrochemical sampling, over a range of flow conditions, were used to identify the principal hillslope runoff mechanisms within the catchment. A hydrochemical mixing analysis revealed that runoff emerging from springs in various locations of the hillslope accounted for a significant proportion of flow in the streams, even during storm events. A hydrological model of the catchment was calibrated using the calculated stream flows for four locations, together with results from the mixing analysis for different time points. The calibrated model was used to predict the temporal variability in contributions to stream flow from the hillslope springs and soil water flows. The overall split ranged from 57%:43% spring water:soil water in the upper eastern subcatchment, to 76%:24% in the upper western subcatchment. Copyright © 2006 John Wiley & Sons, Ltd.     

Defining hydrochemical evolution of streamflow through flowpath dynamics in Kawakami headwater catchment,Central Japan

The hydrochemical behaviour of catchments is often investigated by inferring stream chemistry through identification of source areas involved in hydrograph separation analysis, yet its dynamic evolution of hydrologic pathways has received little attention. Intensive hydrometric and hydrochemical measurements were performed during two different storms on March 29, 2001 and August 21–22, 2001 to define hydrochemical evolution under the dynamic of flow pathways in a 5·2 ha first‐order drainage of the Kawakami experimental basin (KEB), Central Japan, a forested headwater catchment with various soil depths (1·8 to 5 m) overlying late Neogene of volcanic bedrocks. The hydraulic potential distribution and flow lines data showed that the change in flow direction, which was controlled by rainfall amount and antecedent wetness of the soil profile, agreed well with the hydrochemical change across the slope segment during the storm. Hydrograph separation predicted by end‐member mixing analysis (EMMA) using Ca²⁺ and SiO₂ showed that near surface riparian, hillslope soil water and deep riparian groundwater were important in stream flow generation. The evidence of decrease in solutes concentration at a depth of 1 m in the hillslope and 0·6 m in the near surface riparian during peak storm suggested a flushing of high solutes concentration. Most of the solutes accumulated in the deep riparian groundwater zone, which was due to prominent downward flow and agreed well with the residence time. The distinct flow pathways and chemistry between the near surface riparian and deep riparian groundwater zones and the linkage hillslope aquifer and near surface riparian reservoir, which controls rapid flow and solutes flushing during the storm event, are in conflict with the typical assumption that the whole riparian zone resets flow pathways and chemical signature of hillslope soil water, as has been reported in a previous study. Copyright © 2005 John Wiley & Sons, Ltd.     

Complex multiple cosmogenic nuclide concentration and histories in the arid Rio Lluta catchment,northern Chile

Terrestrial cosmogenic nuclide (TCN) concentrations measured in river sediments can be used to estimate catchment‐wide denudation rates. By investigating multiple TCN the steadiness of sediment generation, transport and depositional processes can be tested. Measurements of ¹⁰Be, ²¹Ne and ²⁶Al from the hyper‐ to semi‐arid Rio Lluta catchment, northern Chile, yield average single denudation rates ranging from 12 to 75 m Myr^–1 throughout the catchment. Paired nuclide analysis reveals complex exposure histories for most of the samples and thus the single nuclide estimates do not exclusively represent catchment‐wide denudation rates. The lower range of single nuclide denudation rates (12–17 m Myr^–1), established with the noble gas ²¹Ne, is in accordance with palaeodenudation rates derived from ²¹Ne/¹⁰Be and ²⁶Al/¹⁰Be ratio analysis. Since this denudation rate range is measured throughout the system, it is suggested that a headwater signal is transported downstream but modulated by a complex admixture of sediment that has been stored and buried at proximal hillslope or terrace deposits, which are released during high discharge events. That is best evidenced by the stable nuclide ²¹Ne, which preserves the nuclide concentration even during storage intervals. The catchment‐wide single ²¹Ne denudation rates and the palaeodenuation rates contrast with previous TCN‐derived erosion rates from bedrock exposures at hillslope interfluves by being at least one order of magnitude higher, especially in the lower river course. These results support earlier studies that identified a coupling of erosional processes in the Western Cordillera contrasting with decoupled processes in the Western Escarpment and in the Coastal Cordillera. Copyright © 2008 John Wiley & Sons, Ltd.     

A hillslope-based hydrological model using catchment area and width functions

Abstract

A flow-interval hillslope discretization scheme is proposed for catchment hydrological modelling. By this scheme, a two-dimensional catchment is simplified into a one-dimensional cascade of flow intervals linked by the main stream. Each flow interval comprises a set of parallel hillslopes. The hillslope is the fundamental computational unit in the hydrological model providing lateral inflow to the main stream. The size of hillslope is determined by the catchment area and width functions. Catchment runoff is the total of hillslope responses through the river routing. Tests in four Japanese catchments showed that the model performed well on simulating the overall water balance, general flow pattern, and daily and hourly hydrographs of a whole catchment, as well as simultaneous simulation in different subcatchments. Characteristics of catchment hydrological responses and model applicability are discussed.