Settlement and sustainability in the Polish Sudetes

The paper summarises the history of human settlement in the Sudetes from the Bronze Age. A more intensive stage was reached in the Middle Ages when settlers from the west established new villages deep in the mountain valleys. By the beginning of the 20th century the Sudetes were already overpopulated but after a near-complete ethnic replacement from a German to a Polish population in 1945–8, population continued to grow until the 1980s. However, the economic system was hardly sustainable by this time. There were many polluting industries in the region and massive transboundary pollution from adjacent areas of Czechoslovakia and Germany had a devastating effect on the forests. Moreover, subsidised state agriculture placed heavy pressure on vulnerable mountain grazings. Since 1989 there has been a process of deindustrialisation in the Sudetes and surrounding areas and, with the disappearance of the state farms and the reduction in subsidies, agriculture is now better adjusted to the natural potential and is complemented by a promising start with agrotourism. The population of the region is growing relatively slowly (0.8% per annum 1956–1999), with the rural areas now in decline. A sustainable future for the region is now a possibility, but while there is a consensus for continued environmental reconstruction, supported by alternative economies, this will have to be carefully managed in the years ahead when EU accession may bring heavier development pressures than those evident at the moment. This revised version was published online in July 2006 with corrections to the Cover Date.     

Therapeutic waters in the Polish geological and mining law

The Polish legislation gives groundwaters declared as curative ones a high rank of basic minerals or, in well-defined cases, of common minerals. Both kinds of minerals are subject of mining law regulations. This explains the use of the word deposit which, in the case of groundwaters, often does not reflect reality.     

Stages of development in the Polish Carpathian Foredeep basin

In southern Poland, Miocene deposits have been recognised both in the Outer Carpathians and the Carpathian Foredeep (PCF). In the Outer Carpathians, the Early Miocene deposits represent the youngest part of the flysch sequence, while in the Polish Carpathian Foredeep they are developed on the basement platform. The inner foredeep (beneath the Carpathians) is composed of Early to Middle Miocene deposits, while the outer foredeep is filled up with the Middle Miocene (Badenian and Sarmatian) strata, up to 3,000mthick. The Early Miocene strata are mainly terrestrial in origin, whereas the Badenian and Sarmatian strata are marine. The Carpathian Foredeep developed as a peripheral foreland basin related to the moving Carpathian front. The main episodes of intensive subsidence in the PCF correspond to the period of progressive emplacement of the Western Carpathians onto the foreland plate. The important driving force of tectonic subsidence was the emplacement of the nappe load related to subduction roll-back. During that time the loading effect of the thickening of the Carpathian accretionary wedge on the foreland plate increased and was followed by progressive acceleration of total subsidence. The mean rate of the Carpathian overthrusting, and north to north-east migration of the axes of depocentres reached 12 mm/yr at that time. During the Late Badenian-Sarmatian, the rate of advance of the Carpathian accretionary wedge was lower than that of pinch-out migration and, as a result, the basin widened. The Miocene convergence of the Carpathian wedge resulted in the migration of depocentres and onlap of successively younger deposits onto the foreland plate.     

Investment policy in the Polish transport sector: An appraisal

The common nature of investment policy in the Polish transport system is analysed. The transport system should contribute to national economic growth by providing an efficient service to all sections of industry, agriculture and services, and by ensuring the maintenance of a reasonable level of personal mobility through public passenger facilities. Meanwhile, as shown in the first part of the paper, the volume of transport inputs, 1970–1984 were relatively low and, moreover, their allocation among different modes of transport — not always correct. Some specific features of investment policy in the 1970s are described. Finally, the present-day phenomena and problems characteristic of Polish transport — being mainly a result of improper past policy and nowadays crisis situation — are presented. Paper presented to the IGU Working Group on Geography of Transport: Symposium No. W11, 25–29 August 1986, León, Spain.     

Diagenetic and other highly mineralized waters in the Polish Carpathians

Highly mineralized waters of different chemical types and origin occur in the flysch formations and their bedrocks in the western part of the Polish Carpathians. The marine sedimentation water of the flysch formations is not preserved, as the most mineralized and the heaviest isotopic values of flysch waters are characterized by δ¹⁸O and δ²H values in the ranges of 5–7‰ and −(20–30)‰, respectively. Their origin is related to the dehydration of clay minerals during burial diagenesis, with molecules of marine water completely removed by molecules of released bound water. They are relatively enriched in Na⁺ in respect to the marine water, supposedly due to the release of Na⁺ during the illitization of smectites and preferable incorporation of other cations from the primary brine into newly formed minerals. In some parts of younger formations, i.e. in the Badenian sediments, brines occur with isotopic composition close to SMOW and Cl⁻ contents greatly exceeding the typical marine value of about 19.6 g/L, supposedly due to ultrafiltration. Most probably, the marine water of the flysch formations was similarly enriched chemically in its initial burial stages. Final Cl⁻ contents in diagenetic waters depend on different Cl⁻ contents in the primary brines and on relationships between diagenetic and further ultrafiltration processes. In some areas, diagenetic waters migrate to the surface along fault zones and mix with young local meteoric waters becoming diluted, with the isotope composition scattering along typical mixing lines. In areas with independent CO₂ flow from great depths, they form chloride CO₂-rich waters. Common CO₂-rich waters are formed in areas without near-surface occurrences of diagenetic waters. They change from the HCO₃–Ca type for modern waters to HCO₃–Mg–Ca, HCO₃–Na–Ca and other types with elevated TDS, Mg²⁺ and/or Na⁻ contents for old waters reaching even those of glacial age. Bedrocks of the flysch are represented by Mesozoic and Paleozoic mudstones, sandstones and carbonates, and in some areas by Badenian sediments. Brines of the Mesozoic and Paleozoic bedrocks are usually significantly enriched in Ca²⁺ and Mg²⁺ in comparison with the Badenian brines. By analogy to the deepest brines in the adjacent Upper Silesian Coal Basin, they are supposed to originate from paleometeoric waters of a hot climate.     

Agriculture versus tourism in rural areas of the Polish Carpathians

The Polish Carpathians is one of the regions with the best rural demographic and economic situation in Poland, as indicated by the growth of population, the very advantageous sex and age structure, the low unemployment rate and good housing standards. However, the situation in agriculture is complicated due to the unfavourable natural conditions of the mountainous terrain, the fragmentation of holdings and the low level of efficiency. On the other hand, tourism is a positive factor in the socio-economic transformation of the Carpathian countryside. Tourism was a significant activity even before the Second World War when lodgings were sought in private houses in many villages of the Sub-Tatra, Podhale Basin and the Silesian and Sacz Beskides. The villages currently active as tourist centres show the most dynamic development and the highest level of the socio-economic infrastructure.     

3D structural model of the Polish Basin

A 3D structural modelling of the Permian–Mesozoic Polish Basin was performed in order to understand its structural and sedimentary evolution, which led to basin maturation (Permian–Cretaceous) and its tectonic inversion (Late Cretaceous–Paleogene). The model is built on the present-day structure of the basin and comprises 13 horizons within the Permian to Quaternary rocks. The analysis is based on 3D depth views and thickness maps. The results image the basin-scale symmetry, the perennial localization of the NW–SE-oriented basin axis, the salt movements due to tectonics and/or burial, and the transverse segmentation of the Polish Basin. From these observations, we deduce that salt structures are correlated to the main faults and tectonic events. From the model analysis, we interpret the stress conditions, the timing, and the geometry of the tectonic inversion of the Polish Basin into a NW–SE-oriented central horst (Mid-Polish Swell) bordered by two lateral troughs. Emphasis is placed on the Zechstein salt, considering its movements during the Mesozoic sedimentation and its decoupling effect during the tectonic inversion. Moreover, we point to the structural control of the Paleozoic basement and the crustal architecture (Teisseyre–Tornquist Zone) on the geometry of the Polish Basin and the Mid-Polish Swell.     

Geographical perspectives on Polish tourism

Like other sectors of the Polish economy, the tourist industry is going through a radical restructuring process which began at the start of the 1990s and reached a new stage with the 1998 Tourist Services Act. The business is now firmly market-oriented and standards are being set in line with EU norms. Tourism is of great importance for Poland because, through the promotion of attractive natural and cultural landscapes of international importance, it plays a central role in the search for a more sustainable economy and it also enhances the potential for development in many of the country's poorer regions. Employment in the industry is increasing both relatively and absolutely. This paper examines the opportunities with particular reference to Lower Silesia where the tourism potential offers an important approach to the solution of the region's economic and social problems. Particular reference is made to the refurbishment of historic buildings for tourist use and the significance of the restoration of Krobielowice Palace near Wroclaw is fully evaluated. This revised version was published online in July 2006 with corrections to the Cover Date.     

Tectonics of the western part of the Polish Outer Carpathians

The western part of the Polish Outer Carpathians is built up from the thrust, imbricated Upper Jurassic-Neogene flysch deposits. The following Outer Carpathian nappes have been distinguished: Magura Nappe, Fore-Magura group of nappes, Silesian, Subsilesian and Skole nappes. Interpretation of seismic and magnetotelluric survey from the region South of Wadowice, allows observation of relationship between basement and flysch nappes in the Outer Carpathians. It also allows identification of dislocation cutting both flysch nappes and their basement. All the Outer Carpathian nappes are thrust over the southern part of the North European Platform. The platform basement is composed of older Precambrian metamorphic rocks belonging to the Bruno-Vistulicum terrane. Sedimentary cover consists of Paleozoic, Mesozoic and Neogene sequences. The characteristic features of this boundary are horsts and troughs of general direction NW-SE, turning W-E. Faults cutting only the consolidated basement and the Paleozoic cover were formed during the Hercynian Orogeny in the Carboniferous and the Early Permian. Most of the older normal faults were covered by allochtonous flysch nappes forming thus the blind faults. During the last stage of the geodynamic development the Carpathians thrust sheets moved towards their present position. Displacement of the Carpathians northwards is related to development of dextral strike-slip faults of N—S direction. The orientation of this strike-slip fault zones zone more or less coincides with the surface position of the major faults perpendicular to the strike of the Outer Carpathian thrustsheets. The huge fault cuts formations from the Paleozoic basement through the flysch allochton between the boreholes in Sucha Beskidzka area. The displacement of nappes of the Carpathian overthrust and diapiric extrusion of plastic formations of the lower flysch units occurred along this fault.     

The paleo- and petromagnetic record in the Polish and Ukrainian loess-paleosol sequences

718 samples from five loess-paleosol sections located in the Black Sea region, the western Ukraine and Poland (Lublin Upland) were the subject of a paleomagnetic and petromagnetic study. Strong magnetic enhancement is observed in the cambisols, chernozems and iluvial horizons of the forest (podzolic) and leached brown type (brownerde) soils. Distinct magnetic depletion or dilution occurs in the gley soils and the leached horizons of podsols and brown type soils. Magnetic enhancement in the section from Black Sea region was not simply dependent on paleotemperature. Soils from the interstadial periods could be magnetically enhanced to the same degree as soils which were formed during interglacials. In the Polish and Ukrainian loess-palesol sequences, paleorainfall could be a significant factor controlling the susceptibility signal in addition to paleotemperature. The degree of warming of paleoclimate can be expressed by the amount of secondary maghemite that was formed in the studied paleosols.All sections were deposited after the Brunhes/Matuyama paleomagnetic reversal. No remarkable paleomagnetic event was encountered. However, very distinct directional changes associated most probably with the secular variations were observed in the Polish and western Ukrainian sections. These changes can serve as a stratigraphic correlation tool for comparison with petromagnetic data.     

From the regulation of space to the space of regulation

For about ten years, economic geography has enjoyed a renewal. Many researchers have found anchorage in different theoretical currents in order to analyse current economic changes. Regulation theory has been particularly inspirational in these considerations. This article represents a balance between different axes of research in regional economics, and their encounters with regulationist ideas. The main schools of thought are presented in chronological order with the prominent actors and the research results underlining the principal elements from each school. Finally, some prospects for the future are outlined. This revised version was published online in July 2006 with corrections to the Cover Date.     

Impact of forecasted land use changes on flood risk in the Polish Carpathians

Flooding is a major environmental hazard in Poland with risks that are likely to increase in the future. Land use and land cover (LULC) have a strong influencing on flood risk. In the Polish Carpathians, the two main projected land use change processes are forest expansion and urbanization. These processes have a contradictory impact on flood risk, which makes the future impact of LULC changes on flooding in the Carpathians hard to estimate. In this paper, we investigate the impact of the projected LULC changes on future flood risk in the Polish Carpathians for the test area of Ropa river basin. We used three models of spatially explicit future LULC scenarios for the year 2060. We conduct hydrological simulations for the current state and for the three projected land use scenarios (trend extrapolation, ‘liberalization’ and ‘self-sufficiency’). In addition, we calculated the amount of flood-related monetary losses, based on the current flood plain area and both actual and projected land use maps under each of the three scenarios. The results show that in the Ropa river, depending on scenario, either peak discharge decreases due to the forest expansion or the peak discharge remains constant—the impact of LULC changes on the hydrology of such mountainous basins is relatively low. However, the peak discharges are very diverse across sub-catchments within the modeling area. Despite the overall decrease of peak discharge, there are areas of flow increase and there is a substantial projected increase in flood-related monetary losses within the already flood-prone areas, related to the projected degree of urbanization.     

Albian and Cenomanian palaeobathymetry in the Pieniny Klippen Belt Basin, Polish Carpathians

During the Albian and Cenomanian, the Pieniny Klippen Belt Basin, a part of the Carpathian geosynclinal domain, showed a clear differentiation into an axial deepest part represented by the Pieniny and Branisko successions and two marginal zones, a southern (Nizna and Haligovce successions, in Slovakia) and a northern zone (in Poland and Slovakia) represented by the Niedzica, Czertezik and Czorsztyn successions, becoming progressively more shallow towards the north. Five palaeobathymetric foraminiferal associations have been distinguished in the axial and northern marginal zone sediments of the Klippen Basin, corresponding to: ‘A’ shelf and upper slope: relatively large proportion of nodosariids and miliolids (Czorsztyn succession); ‘B1’ middle part of slope; oligotaxic planktonic assemblage dominant (Niedzica through Branisko successions and northern part of the Pieniny succession); ‘B2’ middle part of slope: larger proportion of agglutinated foraminifers, association characteristic of sediments influenced by turbidites (submarine flyschoid channels in the Branisko succession); ‘Cl’ middle and lower parts of slope: scarce microfauna, Hedbergella and textularids dominant (Pieniny succession, middle part); ‘C2’ slope/abyssal plain transition, close to foraminiferal lysocline (probably about 3500m below sea level): scarce specimens corroded and slightly dissolved (Pieniny succession, southern part).     

Evaluation of rock-mass state in Polish copper mines through monitoring the borehole deformations

Sensors for borehole deformation measurements in mining panel roofs, as well as a method of high-energy tremors risk evaluation, based on borehole deformation monitoring are described. There are differences in manners in which borehole deformation takes place prior to a high-energy tremor. A method for rock-mass instability detection in copper mining panels is developed and described, as well as a practical procedure for forecasting the rock-mass state. On the basis of 1351 “real time” forecasts made in the 10 copper mine panels during 5451 days and on the basis of the 55 high-energy tremors occurred, the evaluation of forecast effectiveness is presented. The mean chance value of occurrence of the high-energy tremor after a rock-mass stability forecast was evaluated as 1% and after a rock-mass instability forecast, as 20%.     

Evaluation of weathering-resistance classes in clastic rocks on the example of Polish sandstones

The scope of the paper is an attempt at the identification of the weathering-resistance classes within clastic rocks by means of analysis of capillary pressure saturation curves. The porosimetric parameters corresponding to the cementing character and the grains’ mineralogical content are very important features of stone building materials, because of the weathering processes. The analysed rocks were Polish sandstones and muddy sandstones used for building purposes, collected from different geological units of Poland (i.e. Sudety Mts. Carpathian Mts. and Holy Cross Mts.) The results indicate the usefulness of sandstone materials for building purposes. They could also be used in conservation procedures and for the reconstruction of existing buildings and monuments. Basing on the parameterisation, with the van Genuchten function, of cumulative capillary pressure saturation curves, it was possible to distinguish four groups of the sampled rocks. The lithological features and weathering sustainability within the groups are quite uniform, what allow identifying the weathering resistance classes. Taking into account the complicated nature of all the factors influencing weathering processes, it is supposed that the presented parameterisation could be a useful tool for weathering-resistance classification of clastic rocks. The classification could be useful in building industry and in conservation of historical stone monuments.     

Neogene stress field in the central and eastern parts of the outer Polish Carpathian Foredeep

The Polish Carpathian Foredeep (PCF) is a foreland basin formed during the regional flexure of the East European continental lithosphere related to a continental collision in the Carpathian realm. The infill of the PCF basin consist of the uppermost Lower to the Upper Miocene (Ottnangian-Pannonian) sediments. These are mostly mudstones and clays, more rarely sandstones, limestones and evaporites. Numerous thrusts, strike-slip and normal faults, and even folds exist in the whole PCF. The orientation of these structures is variable but they show the privileged directions. The spatial analysis of structures and their crosscutting relationships, together with published seismic data permit conclude that the regional stress field in studied part of PCF was stable during the whole Neogene time till now. The orientation of the maximum horizontal stress axis was NNE-SSW. The local changes of the stress field orientation were caused by activity of the strike-slip fault in the foredeep basement or even the rotation of the basement blocks. The visible response on the basement activity were mostly outcrop-scale structures, namely the number and variety of structures are increasing in individual outcrop. However, the map-scale structures were also generated, for example so called Ryszkowa Wola Horst, a large pop-up structure.