共查询到19条相似文献,搜索用时 171 毫秒
1.
在Wheeler本构模型框架的基础上,提出了一个水力与力学耦合的本构模型。该模型中的土-水特征曲线采用毛细滞回内变量模型,能够更好地描述水力历史变化下毛细滞回现象对非饱和多孔介质变形的影响,同时也可描述非饱和多孔介质变形对渗流的影响。非饱和土的强度不仅与吸力有关,而且受到饱和度的影响。相同的吸力下,土样经过吸湿和脱湿路径的饱和度不同,因此,非饱和土的强度也不同。此模型以体积含水率的塑性变化和体变的塑性变化为硬化参数,不仅能描述基质吸力对非饱和土的强化作用,而且考虑了饱和度对强度及变形的影响。试验结果与模型预测基本吻合,证明该模型能够模拟非饱和土的主要特性。为了简化,此模型是在各向同性荷载下推得的,有待于推广到一般的应力状态 相似文献
2.
在描述非饱和土力学本构行为的Gens-Alonso模型[1]的基础上,结合化学浓度对前固结压力的软化公式[2],并考虑了化学浓度对黏聚力的软化作用,建立了描述非饱和土化学-水力-力学耦合行为的本构模型。对包括化学-水力-力学本构关系、流体流动和污染物传输的控制方程的平衡方程组进行有限元离散,并采用此非饱和土化学-水力-力学耦合行为的数值模型对非饱和土中隧道周围化学-水力-力学耦合过程进行了模拟,对纯粹的力学响应、弹性化学力学响应、弹塑性化学力学响应 3 种情况进行了分析,数值结果显示了化学浓度作用下隧道周围的体积变化量和应力状态比单纯的力学响应有较大的提高,隧道表面的收缩量也有明显的增大。数值模拟的结果显示了该方法对模拟非饱和土复杂的耦合行为的可行性。 相似文献
3.
一种高温下混凝土化学塑性-损伤耦合本构模型 总被引:2,自引:0,他引:2
提出了一个用于模拟高温下混凝土化学塑性-损伤耦合本构行为的数值模型。发展了一个化学塑性-损伤耦合分析的一致性应力返回映射算法。为了保证对于全局守恒方程Newton迭代过程的2阶收敛率,推导并形成了一致性切线模量矩阵。数值算例显示了文中发展的化学塑性-损伤耦合本构模型在模拟高温下混凝土中复杂破坏过程的能力和有效性。 相似文献
4.
《岩土力学》2020,(2)
非饱和土应力-应变关系是土力学研究的重要领域。众多学者在非饱和土本构模型及其数值实现方面取得了大量研究成果,但在显示积分算法方面研究较少。在ABAQUS有限元平台基础上,应用带误差控制的显示积分算法,将一种扩展剑桥非饱和土本构模型编制成ABAQUS umat用户材料本构模型子程序,程序应用自动子增量步算法进行误差控制,采用改进欧拉法进行常微分方程显示求解。应用ABAQUS usdfld子程序将ABAQUS计算过程中饱和度及其增量保存为状态变量并导入umat进行耦合计算,使程序完全具备了进行非饱和土本构计算的能力。通过与ABAQUS自带饱和土本构模型的对比数值试验以及多种不同应力路径下的数值试验,验证了本构程序算法的正确性与合理性,相较于传统方法具有形式简洁、计算精度高、稳定性高等优点。最后运用扩展剑桥模型进行考虑水力滞回效应的土干湿循环数值试验,并分析了模型参数b对土干湿循环条件下不可逆累积变形的影响。结果表明,模型参数b对非饱和土干湿循环条件下的力学行为影响很大,b值越大不可逆累积变形越明显,b值越小则不可逆累积变形越小。所采用的误差控制自动子增量步显示积分算法在模拟非饱和土扩展剑桥模型时取得了良好效果,为后续研究打下坚实基础。 相似文献
5.
《岩土力学》2021,(2)
非饱和土应力应变关系是土力学研究的重要领域。众多学者在非饱和土本构模型及其数值实现方面取得了大量研究成果,但在显示积分算法方面研究较少。本文在Abaqus有限元平台基础上,应用带误差控制的显示积分算法,将一种扩展剑桥非饱和土本构模型编制成Abaqus umat用户材料本构模型子程序,程序应用自动子增量步算法进行误差控制,采用改进欧拉法进行常微分方程显示求解。应用Abaqus usdfld子程序将Abaqus计算过程中饱和度及其增量保存为状态变量并导入umat进行耦合计算,使程序完全具备了进行非饱和土本构计算的能力。通过与Anaqus自带饱和土本构模型的对比数值试验以及多种不同应力路径下数值试验,验证了本构程序算法的正确性与合理性,相较于传统方法具有形式简洁、计算精度高、稳定性高等优点。最后本文运用扩展剑桥模型进行考虑水力滞回效应的土干湿循环数值试验,并分析了模型参数b对土干湿循环条件下不可逆累积变形的影响,结果表明模型参数b对非饱和土干湿循环条件下的力学行为影响很大,b值越大不可逆累积变形越明显,b值越小则不可逆累积变形越小。本文采用的误差控制自动子增量步显示积分算法在模拟非饱和土扩展剑桥模型时取得了良好效果,为后续研究打下坚实基础。 相似文献
6.
非饱和土水-力本构模型及其隐式积分算法 总被引:1,自引:0,他引:1
在已有工作基础上建立了水力-力学耦合的非饱和土本构模型,在硬化方程中考虑饱和度的影响,同时在土水特征曲线中考虑了塑性体变的影响,从而使模型可以反映非饱和土中的毛细现象与土中弹塑性变形现象的耦合行为。采用隐式积分方法,建立了非饱和土耦合模型的数值模型,并推导了得到了水力-力学耦合的非饱和土的一致切线模量。利用该算法编制了本构模型计算的子程序,使其能向外输出切线刚度矩阵,用于有限元计算。为了验证该算法和程序的正确性,用所编制程序对不同路径下的土体行为进行了预测。通过预测结果与试验结果相对比,表明程序预测结果与试验数据相吻合,模型可以较好地模拟土体的水力-力学耦合行为特性。 相似文献
7.
8.
9.
非饱和土的水力和力学特性及其弹塑性描述 总被引:6,自引:3,他引:3
简单回顾了非饱和土本构模型研究的发展历程,总结了近几年非饱和土弹塑性本构模型最新研究成果,重点介绍了能统一模拟非饱和土水力性状和力学性状耦合的弹塑性本构模型。通过对建立模型过程中的几个核心问题讨论,较详细地说明该类模型的结构、性能以及相关问题。非饱和土水力性状的滞回性用假定存在饱和度弹性区间的弹塑性过程来模拟;该类耦合模型不仅考虑了吸力对非饱和土水力性状和力学性状的影响,还考虑了饱和度对应力-应变关系和强度的影响以及土体变形对土-水特征曲线的影响。用同一套模型参数,耦合模型可统一预测在吸力控制或含水率控制下沿各种应力路径下非饱和土的水力-力学特性,并简单介绍了膨胀性非饱和土的弹塑性本构模型以及耦合模型在有限元数值计算中的应用。 相似文献
10.
11.
A new constitutive formulation for simulating the behaviour of nearly saturated sands under seismic loads is presented. The formulation is based on combining the Henry's law for dissolution of gas in water, the ideal or perfect gas law and the law of conservation of mass. The effects of transient air dissolution in water on the compressibility of partially saturated soils are also taken into account. The model was calibrated based on numerical simulations of isotropically consolidated cyclic triaxial tests conducted on partially saturated samples of Toyoura sand. A multi‐yield plasticity soil constitutive model implemented in the finite element code DYNAFLOW was used for these numerical simulations. It is shown that the formulation proposed here is able to reasonably predict the soil cyclic undrained behaviour at various degrees of saturation (95% and higher). Copyright © 2006 John Wiley & Sons, Ltd. 相似文献
12.
T. Hueckel 《国际地质力学数值与分析法杂志》1997,21(1):43-72
Isothermal chemo-elasto-plasticity of clays is discussed, to describe strains induced in clay by permeation of it with a low dielectric constant organic contaminant, in the presence of stress. The strain is crucial in controlling permeability changes in chemically affected clay barriers of landfills and impoundments. The theory encompasses chemical softening or yield surface reduction, coefficient of chemical reversible expansion or contraction due to mass concentration increase, as well as chemical sensitivity of bulk plastic modulus. The experiments on chemistry and stress dependent permeability of Sarnia clay performed by Fernandez and Quigley (1985, 1991) are interpreted using this model. The numerical representations of the chemo-plastic softening function and the chemo-elastic strain function, as well as plastic bulk modulus sensitivity to concentration are evaluated for dioxane and ethanol. Specific requirements for the tests for chemo-plastic behavior of clays are discussed. © 1997 by John Wiley & Sons, Ltd. 相似文献
13.
饱和土变形过程模拟的统计损伤方法研究 总被引:1,自引:0,他引:1
针对传统损伤理论的不足与局限性,从研究岩土材料损伤的合理定义入手,并通过深入探讨饱和土损伤的微观力学机制,建立了适合于饱和土的新型损伤模型。在此基础上,引进统计损伤理论,建立了模拟特定围压下饱和土变形全过程的统计损伤本构模型及其参数确定方法。通过探讨饱和土损伤统计本构模型参数与围压的关系,建立了该模型的合理修正方法,从而建立了反映不同围压条件的统一饱和土损伤统计本构模型。理论与试验结果分析表明了该模型的合理性,该模型不仅能反映饱和土的变形全过程,而且能反映孔隙水压力对饱和土变形的影响。 相似文献
14.
Effect of suction on the mechanical behaviour of iron ore rock 总被引:1,自引:0,他引:1
The effect of suction on the behaviour of iron ore has been studied from both physical and mechanical points of view. The porosity and the suction phenomena have been analysed using different experimental techniques. Uniaxial compressive tests on partially saturated samples have shown that the suction is responsible for strength and cohesion improvement. Considering the theory of partially saturated porous soils of Coussy and Dangla (Mécanique des sols non saturés (2002 edn). Hermès Science: 2002; 390), we have proposed a constitutive law for partially saturated iron ore. The real increase in the apparent cohesion due to the capillary attraction forces is overestimated if the yield function is written in terms of effective stresses. The effect of the capillary cohesion has been modelled with a function in the expression of the apparent cohesion of the yield function. The effect of suction on the mechanical behaviour has been represented in the effective stresses space and in the total stresses space like the Alonso model (Géotechnique 1990; 40 :405–430). Copyright © 2005 John Wiley & Sons, Ltd. 相似文献
15.
上覆单相弹性层饱和地基上刚性条形基础竖向振动的混合边值问题 总被引:1,自引:0,他引:1
根据Biot动力控制方程,运用Fourier积分变换技术,并按照混合边值条件和连续条件建立了上覆单相弹性层饱和地基上刚性条形基础竖向振动的对偶积分方程,并将其退化到完全饱和地基的情形。通过引进正交多项式将对偶积分方程化为线性代数方程组,从而得到了上覆单相弹性层的饱和地基上刚性条形基础的竖向振动规律。通过算例分析得到,单相弹性层的厚度对动力柔度系数有着较大的影响,在单相弹性层厚度较小时(小于条形基础半宽的0.1),动力柔度系数曲线与完全饱和的基本重合;完全饱和地基上刚性基础的竖向振动是上覆弹性层厚度Hn=0的特例。 相似文献
16.
An analytical solution to the two-dimensional wave propagation in fluid-saturated half-space subjected to a strip load with vertical harmonic oscillation at the surface is presented. The basic equations have been derived on the basis of Biot's linear theory of poro-elasticity and then solved using Fourier complex transform for the horizontal direction. The importance of a number of soil characteristics including compressibility, degree of saturation and soil permeability has been examined. It is shown that the effect of pore fluid is dominant only for fully saturated soils with incompressible solid grains and low permeability. For partially saturated, compressible or very permeable soils, the stresses would be mainly transferred to solid part and there will be considerable reduction in pore pressure amplitude. 相似文献
17.
为描述饱和土体的流变特性,引入分数阶导数Kelvin-Voigt黏弹性模型,采用解析方法对半透水边界下的分数阶黏弹性饱和土一维固结特性进行了研究。分别对骤加恒载下饱和土一维固结微分方程和分数阶Kelvin-Voigt黏弹性本构方程进行Laplace变换,并联立求解得到了双边半透水边界条件下分数阶黏弹性饱和土在Laplace变换域内的解析表达式。通过Crump方法实现Laplace数值反演,得到时间域内的半解析解。将所得到的解分别退化为分数阶黏弹性饱和土一维固结半解析解和双边半透水黏弹性饱和土一维固结半解析解,结果与已有文献半解析解相同,验证了提出的双边半透水边界条件下分数阶黏弹性饱和土一维固结解的可靠性。通过算例考察了半透水边界条件和分数阶黏弹性饱和土参数对一维固结特性的影响。研究表明,双边半透水边界下分数阶黏弹性饱和土一维固结发展过程与半透水边界条件、分数阶次和黏滞系数有关,且土体的压缩模量对饱和土一维固结最终沉降量有显著影响。 相似文献
18.
This study presents a simple approach to modelling the effect of temperature on the deformation and strength of unsaturated/saturated soils by using the average skeleton stress and degree of saturation. The concept of thermo-induced equivalent stress is introduced to consider the influence of temperature on the pre-consolidated stress. A skeleton stress–saturation framework is applied to enable the model to describe the thermo-elastoplastic behaviour of both unsaturated and saturated soils, as the skeleton stress can smoothly shift to Terzaghi’s effective stress if saturation changes from the unsaturated to the saturated condition. The new model only employs seven parameters, of which five parameters are the same as those used in the Cam-Clay model. The other two parameters can be easily determined by oedometer tests and simple thermo-mechanical tests. Numerical simulations of isotropic loading tests and triaxial shear tests under different conditions are conducted to illustrate the performance of the proposed model. By comparing with experimental temperature controlled oedometer tests and triaxial tests, it is confirmed that the proposed model is able to capture the thermo-mechanical behaviour of unsaturated/saturated normally and over-consolidated soils with a set of unified parameters. 相似文献
19.
The coupled hydro‐mechanical state in soils coming from consolidation/subsidence processes and undergoing plasticity phenomena is here evaluated by means of the subloading surface model. The most important feature of this theory is the abolition of the distinction between the elastic and plastic domains, as it happens in the conventional elastoplastic models. This means that plastic deformations are generated whenever there is a change in stress and a smoother elastoplastic transition is produced. The plasticity algorithm has been implemented in the PLASCON3D FE code, coupling hydro‐thermo‐mechanical fields within a saturated (locally partially saturated) porous medium subjected to external loads and water/gas withdrawals from deep layers (aquifers/reservoirs). The 3D model has been first calibrated and validated against examples taken from the literature, and then subsidence analyses at regional scales due to gas extractions have been developed to predict the evolution of settlements and pore pressure in soils for long‐term scenarios. Copyright © 2011 John Wiley & Sons, Ltd. 相似文献