Trace and rare earth elements in cassiterite — sources of components for the tin deposits of the Mole Granite,Australia

Trace and rare earth elements have been determined for cassiterite from deposits associated with the Mole Granite and hosted by granite, metasediments and metavolcanics. The REE of cassiterite is controlled by the REE of the the ore fluid and the rocks through which this fluid circulated. The REE distribution factor and LREE/HREE value of cassiterite is strongly influenced by the associated mineral assemblage, the fluid chemistry and the crystal chemical characteristics of the host mineral. Cassiterite from deposits hosted by granite have trace and rare earth element characteristics similar to those determined for the Mole Granite. Cassiterite from deposits hosted by metasediments or acid volcanics have most trace and rare earth element characteristics similar to those of the enclosing rocks and some characteristics similar to the Mole Granite. The ore fluid had chemical components derived from the parental granite and components acquired by passage through the metamorphosed aureole.     

Tectonic Features and Stages of Evolution of the Baltic–Mezen Shear Zone in the Phanerozoic,Northwestern Russia

Geotectonics - The general tectonic features of the Baltic-Mezen zone developed along the border of the Fennoscandian shield and the Russian Plate in the north of the East European platform, are...     

Scent of a supercontinent: Gondwana's ores as chemical tracers—tin,tungsten and the Neoproterozoic Laurentia-Gondwana connection

The birth of Gondwana is inextricably linked to the break-up of the earlier Neoproterozoic supercontinent Rodinia. In detail, the Neoproterozoic reconstructions of Rodinia are unsolved and without them a detailed kinematic history of the birth of Gondwana cannot be constructed. This paper shows that Gondwana's ore deposits provide chemical “scents” that can be effectively used to trace the tectonic history of Gondwana; and the heterogenous distribution of Gondwana's ore deposits are used to evaluate Late Neoproterozoic reconstructions, which place Laurentia against West Gondwana along a common belt of Grenville age rocks. West Gondwana (including its Grenville-like rocks) is anomalously enriched in Sn and W relative to the rest of Gondwana. The Grenville Province of Laurentia and its immediate hinterland are devoid of Sn-W deposits and even occurrences of any significance. Therefore, Rodinia reconstructions which juxtapose East Laurentia against the west coast of South America result in juxtaposition of distinctly different metalliferous crustal blocks. These reconstructions may not be correct, and other models should be (re-)explored.     

Geochemical constraints on the genesis of the Pb–Zn deposit of Jalta (northern Tunisia): Implications for timing of mineralization,sources of metals and relationship to the Neogene volcanism

The occurrence of Pb–Zn deposits of Jalta district (northern Tunisia) as open space fillings and cements and breccia in the contact zones between Triassic dolostones and Miocene conglomerates along or near major faults provides evidence of the relationship between the mineralization and tectonic processes. Pb isotopes in galena from the deposits yielded average ²⁰⁶Pb/²⁰⁴Pb, ²⁰⁷Pb/²⁰⁴Pb and ²⁰⁸Pb/²⁰⁴Pb ratios of 18.821, 15.676 and 38.837, respectively, implying a well-mixed multi-source upper crustal reservoir of metals. Magmatism and compressional tectonism during the Alpine orogeny favored Pb–Zn mineralization in the Jalta district. The enrichment in Pb, Zn, Cd and Co of the Triassic carbonates and enrichments in Pb, Zn and Cd in Triassic clayey shales is associated with hydrothermal alteration around faults. Alunite in the deposit has δ³⁴S values (−2.5 to −1.5‰ VCDT), which could have been formed at and above the water table in a kind of steam-heated environment, where fluids containing H₂S mixed with fluids containing K and Al. The H₂S could have been produced by TSR of sulfates at high temperature at depth and then leaked upward through deep-seated faults, whereas the K and Al could have been acid-leached from Miocene volcanic rocks.     

Tectonic Units and Their Fundamental Characteristics on the Northern Margin of the Alxa Block

The northern margin of the Alxa block is the junction of a tectonic units. Four first-order tectonic units are distinguished: 1. the Yagan structural zone characteristic of an immature island arc; 2. the Zhusileng-Hangwula structural zone, which was a passive continental margin in the Early Palaeozoic and was transformed into an active continental margin in the Late Palaeozoic;3. the Shalazha structural zone characteristic of a mature island arc; 4. the Nuru-Langshan structural zone, which was a Proterozoic orogenic belt and later evolved into an extensional transtional crust in the Palaeozoic. The above-mentioned tectonic units differ remarkably in sedimentary formations, magmatic rock associations, metamorphism and geochemistry and are bounded by faults between one another.     

Combined zircon and cassiterite U–Pb dating of the Piaotang granite-related tungsten–tin deposit,southern Jiangxi tungsten district,China

The large low-grade Piaotang W–Sn deposit in the southern Jiangxi tungsten district of the eastern Nanling Range, South China, is related to a hidden granite pluton of Jurassic age. The magmatic-hydrothermal system displays a zonation from an inner greisen zone to quartz veins and to peripheral veinlets/stringers (Five-floor zonation model). Most mineralization is in quartz veins with wolframite > cassiterite. The hidden granite pluton in underground exposures comprises three intrusive units, i.e. biotite granite, two-mica granite and muscovite granite. The latter unit is spatially associated with the W–Sn deposit.Combined LA-MC-ICP-MS U–Pb dating of igneous zircon and LA-ICP-MS U–Pb dating of hydrothermal cassiterite are used to constrain the timing of granitic magmatism and hydrothermal mineralization. Zircon from the three granite units has a weighted average ²⁰⁶Pb/²³⁸U age of 159.8 ± 0.3 Ma (2 σ, MSWD = 0.3). The cathodoluminescence (CL) textures indicate that some of the cassiterite crystals from the wolframite-cassiterite quartz vein system have growth zonations, i.e. zone I in the core and zone II in the rim. Dating on cassiterite (zone II) yields a weighted average ²⁰⁶Pb/²³⁸U age of 159.5 ± 1.5 Ma (2 σ, MSWD = 0.4), i.e. the magmatic and hydrothermal systems are synchronous. This confirms the classical model of granite-related tin–tungsten mineralization, and is against the view of a broader time gap of >6 Myr between granite magmatism and W–Sn mineralization which has been previously proposed for the southern Jiangxi tungsten district. The elevated trace element concentrations of Zr, U, Nb, Ta, W and Ti suggest that cassiterite (zone II) formed in a high-temperature quartz vein system related to the Piaotang granite pluton.     

Middle Devonian Picrites of the Southern Margin of Altay Orogenic Belt and Implications for the Tectonic Setting and Petrogenesis

INTRODUCTION Inrecentyears,greatprogressonthegeologic tec tonicevolutionandmineralresourcesofXinjianghas beenachieved.However,manyissuesarestilldebated, suchasancienttectonicpatternsandtheclosuretimeof theancientoceanicbasin(LiandXu,2004).Theseis sueshavelimitedourknowledgeoftheformationande volutionofAsiancontinents,aswellastheexploration anddevelopmentofmineralresources. Recently,theHilaketehalasuporphyrycopperde positwasdiscoveredinthestrataoftheMiddleDevoni anBeitashanFormatio…     

Chemical and tectonic controls on the formation of sparry magnesite deposits — the deposits of the northern Greywacke Zone (Austria)

The sparry magnesite deposits of the northern Greywacke Zone are situated at the base of thrust sheets. Model calculations and natural examples suggest that an inverse temperature gradient can only be established at the base of a thrust sheet if thrusting is so rapid as to be geologically unrealistic. Independently of this thrusting induces a fluid flow from the lower units to the front of the moving thrust sheet. Stability data of magnesite and dolomite in contact with fluids with different Ca/(Ca+Mg) ratios suggest that this tectonically induced fluid flow produce magnesite from preexisting dolomite by metasomatism.

---

Zusammenfassung Die Spatmagnesitvorkommen der Nördlichen Grauwackenzone liegen innerhalb von Deckengrenzen. Modellberechnungen zeigen, daß ein inverser Temperaturgradient sich nur dann an der Basis von Decken einstellen kann, wenn die Überschiebungsgeschwindigkeit so groß wird, daß sie geologisch unglaubwürdig ist. Deckenüberschiebungen erzeugen aber in jedem Fall in der überschobenen Einheit einen zur Deckenfront hin gerichteten Fluidstrom. Eine Betrachtung der Stabilitätsdaten für Magnesit und Dolomit im Gleichgewicht mit einer fluiden Phase mit unterschiedlichen Ca/(Ca+Mg)-Verhältnissen zeigt, daß durch einen solchen Fluidstrom metasomatisch Magnesit aus Dolomit gebildet werden kann.

---

Résumé Les dépôts de magnésite spathique de la Grauwacken Zone septentrionale sont situés à la base d'unités charriées. Un calcul de modélisation et des exemples naturels montrent qu'un gradient inverse de température ne peut s'établir à la base d'une unité charriée qu'à la condition d'admettre une vitesse de charriage tellement élevée qu'elle est irréaliste. D'autre part, le phénomene de charriage induit un déplacement de fluide depuis les unités inférieures vers le front de la nappe. Les données relatives aux conditions de stabilité de la magnésite et de la dolomite en présence de fluides de divers rapports Ca/Ca+Mg permettent de déduire que le flux ainsi engendré par la tectonique peut engendrer la magnésite par métasomatose à partir de dolomite préexistante.

---

. , , , , . . , Ca/(Ca+Mg) , , , , , , - .

     

Fractal variability in superdeep borehole — implications for the signature of crustal heterogeneities

The deep and superdeep boreholes of the German Continental Deep Drilling Program (KTB) provide probably the most extensive data archive on in-situ properties of metamorphic crustal rock from a single site. Analysis of the variability of several geophysical parameters point out fractal features and a degree of correlation between data values comparable to 1/f-noise. Accordingly, the Earth's crust, at the KTB site, can be statistically described as an inhomogeneous medium whose properties are basically invariant from metre to kilometre scale. Piecewise homogeneous models appear to be inadequate to represent petrophysical properties, at least in the vertical dimension, and 1/f-noise offers a far more suitable concept to simulate heterogeneities in the Earth's crust.     

Re–Os ages for molybdenum mineralization in the Fengning region of northern Hebei Province,China: New constraints on the timing of mineralization and geodynamic setting

A recently recognized molybdenum (Mo) metallogenic belt is present within and adjacent to the northern part of the North China Craton (NCC). More than 20 Mo deposits are present in the belt, including the Sadaigoumen and Dacaoping porphyry deposits located in the Fengning region of the northern part of Hebei Province. The Sadaigoumen deposit has a Re–Os molybdenite weighted mean age of 236.5 ± 2.2 Ma (MSWD = 1.4, n = 6), which is more reliable than existing dates and is interpreted as the precise age for formation of the deposit. The Dacaoping Mo deposit is about 100 million years younger, with a Re–Os molybdenite isochron age of 140.1 ± 3.4 Ma (2σ, MSWD = 0.26, n = 5), which is within error of the weighted mean age of 139.4 ± 0.9 Ma. The ages of the two deposits show that there are at least two episodes of Mo porphyry formation in the Fengning region. In combination with the regional geological evolution of this part of the craton margin, we propose that the Triassic Mo event at Sadaigoumen is associated with a collisional event during the closure of the ancient Asian Ocean, whereas the Early Cretaceous Mo event at Dacaoping is associated with lithospheric thinning of the NCC.     

Temporal and spatial controls on the formation of magmatic PGE and Ni–Cu deposits

Magmatic PGE and Ni–Cu deposits form in contrasting geologic environments and periods. PGE deposits predominantly occur in large layered intrusions emplaced during the late Archean and early Proterozoic into stabilized, relatively S-poor cratonic lithosphere that provides enhanced preservation potential. The magmas ascend through intracratonic sutures where extension and rifting is limited. Crystallization under conditions of low regional stress, with limited magma-induced sagging due to underlying thick buoyant sub-continental mantle lithosphere, is consistent with their laterally continuous layering. Most of the global resources occur in three large intrusions: Bushveld, Great Dyke and Stillwater. Due to the large size (tens of kilometres) and limited complexity of the deposits, they are relatively easy to locate and delineate. As a result, the search space is relatively mature and few new discoveries have been made in the last few decades. The parental magmas to the intrusions are predominantly derived from the convecting mantle but, in addition, the involvement of the sub-continental lithospheric mantle is suggested by the relative Pt enrichment of most of the major deposits. In contrast to the PGE deposits, Ni–Cu deposits form throughout geologic time, but with the largest deposits being younger than ca. 2 Ga. The sulfide ores are concentrated under highly dynamic conditions within lava channels and magma conduits. The deposits are preferentially located near craton margins towards which mantle plumes have been channelled and where mantle magmas can readily ascend through abundant trans-lithospheric structures. Magma flow is focused and locally enhanced by shifting compressive–extensional tectonic regimes, and abundant S-rich crustal rocks provide an external S source that is required for the majority of deposits. The igneous bodies hosting the deposits tend to be irregular and small, tens to hundreds of metres in width and height, and are difficult to locate. As a result, the search space remains relatively immature. Understanding their tectonic setting helps reduce the prospective search space for world-class examples.     

Geochemical constraints on the genesis of the Sarıcakaya intrusive rocks,Turkey: Late Paleozoic crustal melting in the central Sakarya Zone

The Sakarya Zone is intruded by several Late Paleozoic granitoids, of which the Sar?cakaya intrusive rocks in the central Sakarya (Eski?ehir) region, is the least-studied. The Sar?cakaya intrusive rocks consist mainly of quartz diorite-granodiorite, granodiorite and granite. They are, geochemically, divided into two groups: diorites and granites. The former is medium-K and calc-alkaline (mainly I-type), whereas the latter is high-K to shoshonite and calcic (I-type). Typical minerals for both rock types are plagioclase, K-feldspar, quartz, biotite, hornblende and Fe–Ti oxides. Chondrite-normalized REE patterns for the Sar?cakaya intrusive rocks are moderately fractionated and have small negative Eu anomalies. They are enriched in LILE and LREE relative to HFSE showing characteristics of arc-related granitoids. Geochemical characteristics of the Sar?cakaya intrusive rocks indicate a hybrid origin through partial melting of lower crustal source rocks.     

POLONAISE'97 — Seismic and gravimetric modelling of the crustal structure in the polish basin

The main aim of this paper is seismic and gravimetric modelling of the crustal structure in the Polish Basin. Preliminary results of a large seismic experiment POLONAISE'97 which was conducted during May of 1997 and targeted the deep structure of the Trans-European Suture Zone in Poland are presented. Apart of five POLONAISE'97 profiles (P1÷ P5) two other deep seismic sounding profiles (LT-7 and TTZ) passing the Polish Basin are discussed. Two-dimensional P-wave velocity models of the crust for these high resolution profiles of a total length of about 3000 km are presented. The actual resolution of the crustal structure recognition gives a new possibility for the study of the gravity field's morphology. The gravity modelling along the profiles was undertaken in a general form, as the study of the mutual accordance between the geometry of seismic boundaries and gravity anomalies as a mathematical relation and it given suggestion for reformulation of the fit problem. The first results obtained using the new technique and interpretation are presented in the case of the two-dimensional density modelling of the layers for single profiles of the network and estimations of the supracrustal gravity compensation. The analysis of the residue (r.m.s.) and its gradient is proposed in this new technique instead of analysis of density values, which determination is unstable. The supracrustal gravity response was modelled as a field of equivalent masses on the level situated in the lower lithosphere.     

Geochemical Constraints of Sediments on the Provenance, Depositional Environment and Tectonic Setting of the Songliao Prototype Basin

The geochemistry of sediments is primarily controlled by their provenances, and different tectonic settings have distinctive provenance characteristics and sedimentary processes. So, it is possible to discriminate provenances, depositional environments and tectonic settings in the development of a sedimentary basin with the geochemistry of the clastic rocks. The analytical results of the present paper demonstrate that sediments in the Songliao prototype basin are enriched in silica (SiO2=66.48-80.51 %), and their ΣREE are 30-130 dmes of that of chondrite with remarkable Eu anomalies. In discriminating diagrams of Eu/Eu vs eeeeeREE and (La/Yb)N vs ΣREE, most samples locate above the line Eu/ Eu=l, on the right of the line Eu/Eu/ΣREE=1 and under the line La/Yb)N/eeeeeREE=1/8, which indicates that the depositional environment of sediments in the basin was oxidizing. In addition, variations of MgO, TiO2, A12O3, FeO+Fe2O3, Na2O and CaO vs SiO2 reflect a tendency of increasing mineral maturity of sediments     

Experimental study of the phase and melting relations of homogeneous basalt + peridotite mixtures and implications for the petrogenesis of flood basalts

Flood basalt provinces may constitute some of the most catastrophic volcanic events in the Earth's history. A popular model to explain them involves adiabatic ascent of plumes of anomalously hot peridotite from a thermal boundary layer deep in the mantle, across the peridotite solidus. However, peridotitic plumes probably require unreasonably high potential temperatures to generate sufficient volumes of magma and high enough melting rates to produce flood volcanism. This lead to the suggestion that low melting eclogitic or pyroxenitic heterogeneities may be present in the source regions of the flood basalts. In order to constrain petrogenetic models for flood basalts generated in this way, an experimental investigation of the melting relations of homogeneous peridotite + oceanic basalt mixtures has been performed. Experiments were conducted at 3.5 GPa on a fertile peridotite (MPY90)–oceanic basalt (GA1) compositional join. The hybrid basalt + peridotite compositions crystallised garnet lherzolite at subsolidus temperatures plus quenched ne-normative picritic liquids at temperatures just above the solidus, over the compositional range MPY90 to GA1₅₀MPY90₅₀. The solidus temperature decreased slightly from ∼1500 °C for MPY90 to ∼1450 °C for GA1₅₀MPY90₅₀. Compositions similar to GA1₃₀MPY90₇₀ have 100% melting compressed into a melting interval which is approximately 50–60% smaller than that for pure MPY90, due to a liquidus minimum. During adiabatic ascent of hybrid source material containing a few tens of percent basalt in peridotite, the lower solidus and compressed solidus–liquidus temperature interval may conspire to substantially enhance melt productivity. Mixtures of recycled oceanic crust and peridotite in mantle plumes may therefore provide a viable source for some flood volcanics. Evidence for this would include higher than normal Fe/Mg values in natural primary liquids, consistent with equilibration with more Fe-rich olivine than normal pyrolitic olivine (i.e. <Fo_89–92). Modelling of fractionation trends in West Greenland picrites is presented to demonstrate that melts parental to the Greenland picrites were in equilibrium at mantle P–T conditions with olivine with Fo_84–86, suggesting an Fe-enriched source compared with normal peridotite, and consistent with the presence of a basaltic component in the source. Received: 29 October 1999 / Accepted: 3 February 2000     

Integrated P-T Paths of the High-Pressure Rocks and Their Tectonic Implications for the Mountain-Building of the North Qilian, China

After the integration of petrographic study, geothermobarometry and Gibbs method, the synthetic P-T paths for the rocks from different geological profiles in the North Qilian, China, have been derived. The composite P-T paths from different methods indicate that all the high-pressure rocks in the Qilian area recorded P-T paths with clockwise loops starting at the blueschist facies, later reaching peak metamorphism at the blueschist facies, eclogite fades or epidote-amphibolite facies and ending up with the greenschist facies. The incremental Ar-Ar dating shows that the plateau ages for the high-pressure rocks range from 410 to 443 Ma. The plateau ages could be used as a minimum age constraint for the subduction that resulted in the formation of these high-pressure rocks in the Qilian area. It is proposed that the late-stage decompressional and cooling P-T paths with ends at the greenschist facies for these high-pressure rocks probably reflect the uplift process which could occur after shifting the arc-t     

K–Ar illite dating to constrain multiple events in shallow crustal rocks: Implications for the Late Phanerozoic evolution of NE Asia

A recently developed illite-age-analysis (IAA) approach was applied to determine the multiple events for the Chugaryeong fault belt, Korea. Each event was determined by a combined approach of the optimized illite-polytype quantification and the K–Ar age-dating of clay fractions separated from the fault clays. The Late Cretaceous to Paleogene events (76.5 ± 0.8, 69.1 ± 0.6, 59.3 ± 0.7, and 48.2 ± 0.7 Ma) were recognized by calculating the authigenic 1M/1M_d illite ages on the IAA plots of the fault clays. The Early Cretaceous ages (121.7–124.7 and 112.4 ± 1.5 Ma) were also obtained from the convergent intercepts of 100% 2M₁ illite on the IAA plots. The absence of the 2M₁ illites in the host-rock indicates that the Early Cretaceous ages represent the timings of high-T hydrothermal events of >280 °C. The 2M₁ illites in the fault clays should be pre-formed by a fluid-rock interaction under a relatively high-T subsurface condition, and be mechanically reworked into the near surface along the fault by post-tectonic events. This is the first report determining the absolute age constraints of multi-activated tectonic events from a fault. These geochronological determinations of the multiple events recorded in the Chugaryeong fault belt are crucial to establish the tectonic evolution of the Korean Peninsula since the Late Cretaceous.     

A study on the geochemical characteristics of natural gas and gas sources in the Bozhong sag

Natural gas is composed largely of hydrocarbon gas, especially wet gas in the Bozhong sag. The carbon isotopic composition shows that the gas is of organic origin. The carbon isotopic values of ethane indicate that the natural gas is dominated by mixed gas with minor coal-generated gas and oil-type gas. A gas-source correlation study showed that the source rocks of natural gas are those of the Lower Dongying Formation, the Shahejie Formation and the pre-Tertiary. The natural gas is characterized by multi-source and continuous generation in the study area, indicating that gas exploration potential is good in the Bozhong sag.