Provenance of Triassic and Jurassic sandstones in the Banda Arc: Petrography,heavy minerals and zircon geochronology

Quartz-rich sandstones in the Banda Arc Islands are thought to be equivalent of Mesozoic sandstones on the Australian NW Shelf where they are important proven and potential reservoirs. Previous studies suggested that rivers draining Australia provided most of the sediment input and there have been suggestions of a northern provenance for some Timor sediments. We present results from a provenance study of Triassic and Jurassic sandstones of the Banda Arc between Timor and Tanimbar, which used several methodologies, including conventional light and heavy mineral point counting, textural classification and laser ablation (LA-ICP-MS) U–Pb dating of detrital zircons. Most sandstones are quartz-rich and detrital modes suggest a recycled origin and/or continental affinity, consistent with an Australian source. However, many of the sandstones are texturally immature and commonly contain volcanic quartz and volcanic lithic fragments. In the Tanimbar Islands and Babar, acid igneous material came from both the Australian continent and from the Bird's Head, whereas sandstones in Timor have a greater metamorphic component. Heavy mineral assemblages are dominated by rounded ultra-stable minerals, but mixed with angular grains, and indicate an ultimate origin from acid igneous and metamorphic sources. Detrital zircon ages range from Archean to Mesozoic, but variations in age populations point to differences in source areas along the Banda Arc both spatially and temporally. Significant zircon populations with ages of 240–280 Ma, 1.5 Ga and 1.8 Ga are characteristic and are also common in many other areas of SE Asia. We interpret sediment to have been derived mainly from the Bird's Head, Western and Central Australia in the Triassic. In the Jurassic local sources close to Timor are suggested, combined with recycling of NW Shelf material.     

Provenance of Cretaceous sandstones in the Banda Arc and their tectonic significance

The provenance of Cretaceous sandstones in the Banda Arc islands differs from west to east. Sandstones in Sumba and West Timor contain significant amounts of feldspar (K-feldspar and plagioclase) and lithic fragments, suggesting a recycled to magmatic arc origin. In comparison, East Timor and Tanimbar sandstones are quartz rich, and suggest a recycled origin and/or continental affinity. Heavy mineral assemblages in Sumba and West Timor indicate metamorphic and minor acidic igneous sources and include a mixture of rounded and angular zircon and tourmaline grains. In East Timor, Babar and Tanimbar, an ultimate origin from a mainly acid igneous and minor metamorphic source is interpreted, containing a mixture of rounded and angular zircon and tourmaline grains.Detrital zircon ages in all sandstones range from Archean to Mesozoic, but variations in age populations indicate local differences in source areas. Sumba and West Timor are characterised by zircon age peaks at 80–100 Ma, 200–240 Ma, 550 Ma, 1.2 Ga, 1.5 Ga and 1.8 Ma. East Timor and Tanimbar contain 80–100 Ma, 160–200 Ma, 240–280 Ma, 550 Ma and 1.5 Ga zircon peaks. Most populations are also common in Triassic and Jurassic formations along the Outer Banda Arc and in many other areas of SE Asia. However, the abundance of Jurassic and Cretaceous populations was unexpected. We interpret Cretaceous sandstones from Sumba, Timor and Tanimbar to have been deposited in SE Sundaland. Syn-sedimentary Cretaceous (68–140 Ma) sources are suggested to include the Schwaner Mountains in SW Borneo and Sumba. Material derived mainly from older recycled sediments that had their main sources in the Bird's Head, Western and Central Australia, and local sources close to Timor.     

Provenance of Permian–Triassic Gondwana Sequence units accreted to the Banda Arc in the Timor region: Constraints from zircon U–Pb and Hf isotopes

Analysis of zircons from Australian affinity Permian–Triassic units of the Timor region yield age distributions with large age peaks at 230–400 Ma and 1750–1900 Ma, which are similar to zircon age spectra found in rocks from NE Australia and crustal fragments now found in Tibet and SE Asia. It is likely that these terranes, which are now widely separated, were once part of the northern edge of Gondwana near what is now the northern margin of Australia. The Cimmerian Block rifted from Gondwana in the Early Permian during the initial formation of the Neo-Tethys Ocean. The zircon age spectra of the Gondwana Sequence of NE Australia and in the Timor region are most similar to the terranes of northern Tibet and Malaysia, further substantiating a similar tectonic affinity. A large 1750–1900 Ma zircon peak is also very common in other terranes in SE Asia.Hf analysis of zircon from the Aileu Complex in Timor and Kisar Islands shows a bimodal distribution (both radiogenically enriched and depleted) in the Gondwana Sequence at ~ 300 Ma. The magmatic event from which these zircons were derived was likely bimodal (i.e. mafic and felsic). This is substantiated by the presence of Permian mafic and felsic rocks interlayered with the sandstone used in this study. Similar rock types and isotopic signatures are also found in Permian–Triassic igneous units throughout the Cimmerian continental block.The Permian–Triassic rocks of the Timor region fill syn-rift intra-cratonic basins that successfully rifted in the Jurassic to form the NW margin of Australia. This passive continental margin first entered the Sunda Trench in the Timor region at around 7–8 Ma causing the Permo-Triassic rocks to accrete to the edge of the Asian Plate and emerge as a series of mountainous islands in the young Banda collision zone. Eventually, the Australian continental margin will collide with the southern edge of the Asian plate and these Gondwanan terranes will rejoin.     

Zircon age and Nd–Hf isotopic composition of the Yunnan Tethyan belt,southwestern China

The Baoshan block of the Tethyan Yunnan, southwestern China, is considered as northern part of the Sibumasu microcontinent. Basement of this block that comprises presumably greenschist-facies Neoproterozoic metamorphic rocks is covered by Paleozoic to Mesozoic low-grade metamorphic sedimentary rocks. This study presents zircon ages and Nd–Hf isotopic composition of granites generated from crustal reworking to reveal geochemical feature of the underlying basement. Dating results obtained using the single zircon U–Pb isotopic dilution method show that granites exposed in the study area formed in early Paleozoic (about 470 Ma; Pingdajie granite) and in late Yanshanian (about 78–61 Ma, Late Cretaceous to Early Tertiary; Huataolin granite). The early Paleozoic granite contains Archean to Mesoproterozoic inherited zircons and the late Yanshanian granite contains late Proterozoic to early Paleozoic zircon cores. Both granites have similar geochemical and Nd–Hf isotopic charateristics, indicating similar magma sources. They have whole-rock T _DM(Nd) values of around 2,000 Ma and zircon T _DM(Hf) values clustering around 1,900–1,800 and 1,600–1,400 Ma. The Nd–Hf isotopic data imply Paleoproterozoic to Mesoproterozoic crustal material as the major components of the underlying basement, being consistent with a derivation from Archean and Paleoproterozoic terrains of India or NW Australia. Both granites formed in two different tectonic events similarly originated from intra-crustal reworking. Temporally, the late Yanshanian magmatism is probably related to the closure of the Neotethys ocean. The early Paleozoic magmatism traced in the Baoshan block indicates a comparable history of the basements during early Paleozoic between the SE Asia and the western Tethyan belt, such as the basement outcrops in the Alpine belt and probably in the European Variscides that are considered as continental blocks drifting from Gondwana prior to or simultaneously with those of the SE Asia.     

Gondwana dispersion and Asian accretion: Tectonic and palaeogeographic evolution of eastern Tethys

Present-day Asia comprises a heterogeneous collage of continental blocks, derived from the Indian–west Australian margin of eastern Gondwana, and subduction related volcanic arcs assembled by the closure of multiple Tethyan and back-arc ocean basins now represented by suture zones containing ophiolites, accretionary complexes and remnants of ocean island arcs. The Phanerozoic evolution of the region is the result of more than 400 million years of continental dispersion from Gondwana and plate tectonic convergence, collision and accretion. This involved successive dispersion of continental blocks, the northwards translation of these, and their amalgamation and accretion to form present-day Asia. Separation and northwards migration of the various continental terranes/blocks from Gondwana occurred in three phases linked with the successive opening and closure of three intervening Tethyan oceans, the Palaeo-Tethys (Devonian–Triassic), Meso-Tethys (late Early Permian–Late Cretaceous) and Ceno-Tethys (Late Triassic–Late Cretaceous). The first group of continental blocks dispersed from Gondwana in the Devonian, opening the Palaeo-Tethys behind them, and included the North China, Tarim, South China and Indochina blocks (including West Sumatra and West Burma). Remnants of the main Palaeo-Tethys ocean are now preserved within the Longmu Co-Shuanghu, Changning–Menglian, Chiang Mai/Inthanon and Bentong–Raub Suture Zones. During northwards subduction of the Palaeo-Tethys, the Sukhothai Arc was constructed on the margin of South China–Indochina and separated from those terranes by a short-lived back-arc basin now represented by the Jinghong, Nan–Uttaradit and Sra Kaeo Sutures. Concurrently, a second continental sliver or collage of blocks (Cimmerian continent) rifted and separated from northern Gondwana and the Meso-Tethys opened in the late Early Permian between these separating blocks and Gondwana. The eastern Cimmerian continent, including the South Qiangtang block and Sibumasu Terrane (including the Baoshan and Tengchong blocks of Yunnan) collided with the Sukhothai Arc and South China/Indochina in the Triassic, closing the Palaeo-Tethys. A third collage of continental blocks, including the Lhasa block, South West Borneo and East Java–West Sulawesi (now identified as the missing “Banda” and “Argoland” blocks) separated from NW Australia in the Late Triassic–Late Jurassic by opening of the Ceno-Tethys and accreted to SE Sundaland by subduction of the Meso-Tethys in the Cretaceous.     

Tectonic framework and Phanerozoic evolution of Sundaland

Sundaland comprises a heterogeneous collage of continental blocks derived from the India–Australian margin of eastern Gondwana and assembled by the closure of multiple Tethyan and back-arc ocean basins now represented by suture zones. The continental core of Sundaland comprises a western Sibumasu block and an eastern Indochina–East Malaya block with an island arc terrane, the Sukhothai Island Arc System, comprising the Linchang, Sukhothai and Chanthaburi blocks sandwiched between. This island arc formed on the margin of Indochina–East Malaya, and then separated by back-arc spreading in the Permian. The Jinghong, Nan–Uttaradit and Sra Kaeo Sutures represent this closed back-arc basin. The Palaeo-Tethys is represented to the west by the Changning–Menglian, Chiang Mai/Inthanon and Bentong–Raub Suture Zones. The West Sumatra block, and possibly the West Burma block, rifted and separated from Gondwana, along with Indochina and East Malaya in the Devonian and were accreted to the Sundaland core in the Triassic. West Burma is now considered to be probably Cathaysian in nature and similar to West Sumatra, from which it was separated by opening of the Andaman Sea basin. South West Borneo and/or East Java-West Sulawesi are now tentatively identified as the missing “Argoland” which must have separated from NW Australia in the Jurassic and these were accreted to SE Sundaland in the Cretaceous. Revised palaeogeographic reconstructions illustrating the tectonic and palaeogeographic evolution of Sundaland and adjacent regions are presented.     

西藏拉萨地块过铝质花岗岩中继承锆石的物源区示踪及其古地理意义

富含继承锆石的过铝质花岗岩一般来源于富铝质岩石(如变泥质岩)的部分熔融,因而分析这些继承锆石的U-Pb年龄可以像分析沉积岩碎屑锆石的U-Pb年龄一样,提供过铝质花岗岩源区物质中碎屑沉积物物源区的丰富信息。本文报道了中部拉萨地块早侏罗世过铝质花岗岩的全岩地球化学和锆石U-Pb年代学数据,结合拉萨地块已有二叠纪和晚三叠世过铝质花岗岩的继承锆石年代学数据,总结了目前已有的拉萨地块过铝质花岗岩的继承锆石U-Pb年龄特征(共199个谐和测点)。这些过铝质花岗岩属强过铝质S型花岗岩,其中的继承锆石定义了1250~1100Ma(峰值1181±14Ma)和550~450Ma(峰值494±7Ma)2个最突出的年龄群,分别可比于拉萨地块古生代沉积岩的碎屑锆石年龄峰值(约1170Ma)和寒武纪火山岩的侵位时代,明显不同于西羌塘、安多和特提斯喜马拉雅新元古代-古生代沉积岩中的碎屑锆石年龄频谱。拉萨地块过铝质花岗岩中约1181Ma的继承锆石,可能与拉萨地块古生代沉积岩中的同期碎屑锆石一样,都来自澳大利亚南西部Albany-Fraser造山带和东南极Wilkes等地,而约494的继承锆石,既可能来自澳大利亚西部,也可能来自拉萨地块本地。本文提供了拉萨地块与澳大利亚大陆北缘具有古地理联系的过铝质花岗岩继承锆石U-Pb年龄证据。拉萨地块的研究实践表明,采用过铝质花岗岩继承锆石和古生代沉积岩碎屑锆石相结合的锆石U-Pb年代学方法,可为重建冈瓦纳大陆北缘其它微陆块的古地理和构造岩浆演化提供重要约束。     

Provenance and geochronology of Cenozoic sandstones of northern Borneo

The Crocker Fan of Sabah was deposited during subduction of the Proto-South China Sea between the Eocene and Early Miocene. Collision of South China microcontinental blocks with Borneo in the Early Miocene terminated deep water sedimentation and resulted in the major regional Top Crocker Unconformity (TCU). Sedimentation of fluvio-deltaic and shallow marine character resumed in the late Early Miocene. The Crocker Fan sandstones were derived from nearby sources in Borneo and nearby SE Asia, rather than distant Asian and Himalayan sources. The Crocker Fan sandstones have a mature composition, but their textures and heavy mineralogy indicate they are first-cycle sandstones, mostly derived from nearby granitic source rocks, with some input of metamorphic, sedimentary and ophiolitic material. The discrepancy between compositional maturity and textural immaturity is attributed to the effects of tropical weathering. U–Pb ages of detrital zircons are predominantly Mesozoic. In the Eocene sandstones Cretaceous zircons dominate and suggest derivation from granites of the Schwaner Mountains of southern Borneo. In Oligocene sandstones Permian–Triassic and Palaeoproterozoic zircons become more important, and are interpreted to be derived from Permian–Triassic granites and Proterozoic basement of the Malay Tin Belt. Miocene fluvio-deltaic and shallow marine sandstones above the TCU were mostly recycled from the deformed Crocker Fan in the rising central mountain range of Borneo. The provenance of the Tajau Sandstone Member of the Lower Miocene Kudat Formation in north Sabah is strikingly different from other Miocene and older sandstones. Sediment was derived mainly from granitic and high-grade metamorphic source rocks. No such rocks existed in Borneo during the Early Miocene, but potential sources are present on Palawan, to the north of Borneo. They represent continental crust from South China and subduction-related metamorphic rocks which formed an elevated region in the Early Miocene which briefly supplied sediment to north Sabah.     

Late Triassic sedimentary records in the northern Tethyan Himalaya:Tectonic link with Greater India

The Upper Triassic flysch sediments(Nieru Formation and Langjiexue Group)exposed in the Eastern Tethyan Himalayan Sequence are crucial for unraveling the controversial paleogeography and paleotectonics of the Himalayan orogen.This work reports new detrital zircon U-Pb ages and whole-rock geochemical data for clastic rocks from flysch strata in the Shannan area.The mineral modal composition data suggest that these units were mainly sourced from recycled orogen provenances.The chemical compositions of the sandstones in the strata are similar to the chemical composition of upper continental crust.These rocks have relatively low Chemical Index of Alteration values(with an average of 62)and Index of Compositional Variability values(0.69),indicating that they experienced weak weathering and were mainly derived from a mature source.The geochemical compositions of the Upper Triassic strata are similar to those of graywackes from continental island arcs and are indicative of an acidicintermediate igneous source.Furthermore,hornblende and feldspar experienced decomposition in the provenance,and the sediment became enriched in zircon and monazite during sediment transport.The detrital zircons in the strata feature two main age peaks at 225-275 Ma and 500-600 Ma,nearly continuous Paleoproterozoic to Neoproterozoic ages,and a broad inconspicuous cluster in the Tonian-Stenian(800-1200 Ma).The detrital zircons from the Upper Triassic sandstones in the study area lack peaks at 300-325 Ma(characteristic of the Lhasa block)and 1150-1200 Ma(characteristic of the Lhasa and West Australia blocks).Therefore,neither the Lhasa block nor the West Australia blocks likely acted as the main provenance of the Upper Triassic strata.Newly discovered Permian-Triassic basalt and mafic dikes in the Himalayas could have provided the 225-275 Ma detrital zircons.Therefore,Indian and Himalayan units were the main provenances of the flysch strata.The Tethyan Himalaya was part of the northern passive margin and was not an exotic terrane separated from India during the Permian to Early Cretaceous.This evidence suggests that the Neo-Tethyan ocean opened prior to the Late Triassic and that the Upper Triassic deposits were derived from continental crustal fragments adjacent to the northern passive continental margin of Greater India.     

Palaeozoic and Mesozoic tectonic evolution and palaeogeography of East Asian crustal fragments: The Korean Peninsula in context

East and Southeast Asia comprises a complex assembly of allochthonous continental lithospheric crustal fragments (terranes) together with volcanic arcs, and other terranes of oceanic and accretionary complex origins located at the zone of convergence between the Eurasian, Indo-Australian and Pacific Plates. The former wide separation of Asian terranes is indicated by contrasting faunas and floras developed on adjacent terranes due to their prior geographic separation, different palaeoclimates, and biogeographic isolation. The boundaries between Asian terranes are marked by major geological discontinuities (suture zones) that represent former ocean basins that once separated them. In some cases, the ocean basins have been completely destroyed, and terrane boundaries are marked by major fault zones. In other cases, remnants of the ocean basins and of subduction/accretion complexes remain and provide valuable information on the tectonic history of the terranes, the oceans that once separated them, and timings of amalgamation and accretion. The various allochthonous crustal fragments of East Asia have been brought into close juxtaposition by geological convergent plate tectonic processes. The Gondwana-derived East Asia crustal fragments successively rifted and separated from the margin of eastern Gondwana as three elongate continental slivers in the Devonian, Early Permian and Late Triassic–Late Jurassic. As these three continental slivers separated from Gondwana, three successive ocean basins, the Palaeo-Tethys,. Meso-Tethys and Ceno-Tethys, opened between these and Gondwana. Asian terranes progressively sutured to one another during the Palaeozoic to Cenozoic. South China and Indochina probably amalgamated in the Early Carboniferous but alternative scenarios with collision in the Permo–Triassic have been suggested. The Tarim terrane accreted to Eurasia in the Early Permian. The Sibumasu and Qiangtang terranes collided and sutured with Simao/Indochina/East Malaya in the Early–Middle Triassic and the West Sumatra terrane was transported westwards to a position outboard of Sibumasu during this collisional process. The Permo–Triassic also saw the progressive collision between South and North China (with possible extension of this collision being recognised in the Korean Peninsula) culminating in the Late Triassic. North China did not finally weld to Asia until the Late Jurassic. The Lhasa and West Burma terranes accreted to Eurasia in the Late Jurassic–Early Cretaceous and proto East and Southeast Asia had formed. Palaeogeographic reconstructions illustrating the evolution and assembly of Asian crustal fragments during the Phanerozoic are presented.     

Early Middle Triassic mafic dikes from the Baoshan subterrane,western Yunnan: implications for the tectonic evolution of the Palaeo-Tethys in Southeast Asia

The time of final closure of the Palaeo-Tethys and the Sibumasu-Indochina collision in Southeast Asia represents a major unresolved geologic problem. Here, we present zircon chronology, whole-rock elemental, Sr–Nd, and zircon Hf isotopic geochemistry for newly discovered mafic dikes from the northern segment of the Sibumasu terrane, to provide constraints on this issue. Zircon U–Pb data indicate that the dikes were emplaced at 240 ± 3 Ma. These are the earliest Mesozoic magmatic rocks reported so far in the Sibumasu terrane, the late Palaeozoic passive margin of the Palaeo-Tethys. They are subalkaline tholeiites, showing geochemical characteristics similar to those of enriched mid-ocean ridge basalts (E-MORBs). They have ⁸⁷Sr/⁸⁶Sr(t) ratios of 0.703161–0.703826, ?Nd(t) of +4.8 to +7.5, and zircon ?Hf(t) of +9.2 to +13.3, implying strong mantle depletion. They were derived by partial melting of asthenospheric mantle and underwent subsequent fractional crystallization and lithospheric assimilation. The geologic–petrologic evidence suggests that the mafic dikes were generated in a collisional setting, when suturing of the Baoshan and Simao subterranes (the two subterranes are part of the Sibumasu and Indochina terranes, respectively) occurred. These early Middle Triassic mafic dikes provide an upper limit for Sibumasu–Indochina collision. In conjunction with previous work, we conclude that the final closure of the Palaeo-Tethys and collision of the Sibumasu and Indochina terranes took place during the late Permian to Early Triassic.     

东特提斯喜马拉雅下白垩统碎屑锆石U-Pb年代学及其古地理

东特提斯喜马拉雅在中生代位于东冈瓦纳大陆的结合部位,其古地理对于了解东冈瓦纳大陆裂解至关重要.对东特提斯喜马拉雅塔嘎地区沉积地层进行了详细的碎屑锆石U-Pb年代学研究.结果表明,东特提斯喜马拉雅塔嘎地区采样剖面沉积下限为126.6±2.7 Ma.碎屑锆石年龄谱显示东特提斯喜马拉雅塔嘎地区采样地层主要包含~520 Ma、~890 Ma和~1 200 Ma的特征峰值年龄,对比结果表明东特提斯喜马拉雅塔嘎地区沉积地层碎屑锆石年龄谱与印度东部和澳大利亚西南部地层碎屑锆石年龄谱具有一定的相似性.结合东冈瓦纳岩浆活动记录以及该剖面下部玄武岩年龄,东特提斯喜马拉雅塔嘎地区地层沉积于东特提斯喜马拉雅从东冈瓦纳大陆分离时期,其物质来源可能为印度东部、澳大利亚西南部以及南极大陆.      

U-Pb-Hf isotopic data from detrital zircons in late Carboniferous and Mid-Late Triassic sandstones,and also Carboniferous granites from the Tauride and Anatolide continental units in S Turkey: implications for Tethyan palaeogeography

ABSTRACT

Zircons from Carboniferous sandstones (three samples) and Mid-Late Triassic sandstones (four samples) from the Tauride and Anatolide continental units were analysed for U-Pb-Hf isotopes. For comparison, zircons were also analysed from Carboniferous granites of the Afyon Zone, Anatolides (three samples). A NE African/Arabian source is inferred for both the Carboniferous sandstones of the Taurides (Alada?) and the Anatolides (Konya Complex). In contrast, the Carboniferous Karaburun Melange is characterised by a NW African provenance. A prominent Devonian population occurs in the Carboniferous Karaburun Melange, characterised by mainly positive ε_Hf(t) values that differ significantly from those of the Devonian granites of the Sakarya continental crustal unit (Pontides). Middle-Late Triassic Tauride sandstones include minor Palaeozoic and Early Mesozoic zircons. In contrast, Devonian and Carboniferous zircons are relatively abundant in Late Triassic sandstones of the Karaburun Peninsula. The Hf isotopic compositions of 25 Carboniferous-aged zircons from three samples of Mid-Late Triassic sandstone and one of Late Carboniferous age (one sample) overlap with the ε_Hf(t) values of Carboniferous arc-type granites in the Anatolides. Taking account of the available U-Pb and Lu-Hf isotopic data from comparative crustal units, the Devonian zircon populations from the melanges in the Karaburun Peninsula and the Konya Complex are inferred to have a westerly source (e.g. granitic rocks of Aegean region or central Europe). A tectonic model is proposed in which Palaeozoic Tethys sutured during the late Carboniferous in the west (Aegean region westwards), leaving an eastward-widening oceanic gulf in which sandstone turbidites accumulated, including Devonian zircons.     

An alternative plate tectonic model for the Palaeozoic–Early Mesozoic Palaeotethyan evolution of Southeast Asia (Northern Thailand–Burma)

An alternative model for the geodynamic evolution of Southeast Asia is proposed and inserted in a modern plate tectonic model. The reconstruction methodology is based on dynamic plate boundaries, constrained by data such as spreading rates and subduction velocities; in this way it differs from classical continental drift models proposed so far. The different interpretations about the location of the Palaeotethys suture in Thailand are revised, the Tertiary Mae Yuam fault is seen as the emplacement of the suture. East of the suture we identify an Indochina derived terrane for which we keep the name Shan–Thai, formerly used to identify the Cimmerian block present in Southeast Asia, now called Sibumasu. This nomenclatural choice was made on the basis of the geographic location of the terrane (Eastern Shan States in Burma and Central Thailand) and in order not to introduce new confusing terminology. The closure of the Eastern Palaeotethys is related to a southward subduction of the ocean, that triggered the Eastern Neotethys to open as a back-arc, due to the presence of Late Carboniferous–Early Permian arc magmatism in Mergui (Burma) and in the Lhasa block (South Tibet), and to the absence of arc magmatism of the same age East of the suture. In order to explain the presence of Carboniferous–Early Permian and Permo-Triassic volcanic arcs in Cambodia, Upper Triassic magmatism in Eastern Vietnam and Lower Permian–Middle Permian arc volcanites in Western Sumatra, we introduce the Orang Laut terranes concept. These terranes were detached from Indochina and South China during back-arc opening of the Poko–Song Ma system, due to the westward subduction of the Palaeopacific. This also explains the location of the Cathaysian West Sumatra block to the West of the Cimmerian Sibumasu block.     

青藏高原东北缘祁连山三叠系砂岩碎屑锆石U-Pb定年及其物源分析

三叠系沉积物广泛覆盖青藏高原东北缘,其中松潘—甘孜地区三叠系的沉积物得到了较系统的研究,但是青藏高原北缘的祁连山三叠系盆地的研究却较为缺乏。为了丰富相关研究和揭示区域构造演化的特点,通过古水流方向统计、砂岩中碎屑矿物统计和碎屑锆石U-Pb测年等方法对祁连山三叠纪盆地物源进行系统研究。结果表明,祁连山三叠系盆地的古流向主要有南东向、正南向、南西向,物源来自岩浆弧和大规模褶皱造山作用的混合区。祁连山三叠系砂岩中的碎屑锆石的年龄谱主要峰值集中在250~290 Ma、360~460 Ma、1 600~2 000 Ma和2 200~2 600 Ma这4个年龄段。通过对比分析华北板块、华南板块中和秦祁昆中央造山带中岩浆锆石年龄谱特征可知:1 600~2 000 Ma和2 200~2 600 Ma年龄段的锆石来自华北板块,360~460 Ma年龄段的锆石来自北祁连造山带,250~290 Ma年龄段的锆石来自东昆仑的火山岛弧。此外,600~1 000 Ma年龄段锆石很少,这些锆石来自扬子板块,表明在三叠纪扬子克拉通和华北克拉通发生碰撞形成了秦岭造山带,阻断了来自扬子克拉通的物源。     

Late Jurassic-Cretaceous fluvial evolution of central Africa: Insights from the Kasai-Congo Basin,Democratic Republic Congo

The Congo Basin in central Africa is one of the largest intracratonic sedimentary basins in the world. The geological knowledge of Congo Basin is mainly based on studies from the central part of the basin (“Cuvette Centrale”). We present the results of sedimentary provenance investigations of the Jurassic–Cretaceous strata from the southwestern part of the basin, called the Kasai region. This study combines sandstone petrography with U-Pb and Lu-Hf analyses of detrital zircons to assess the stratigraphy, sedimentary provenance and drainage history of the Upper Jurassic-Cretaceous strata in the Kasai region. The stratigraphy is subdivided into a single Upper Jurassic unit (J1) and four Cretaceous units (C1–C4). Petrographically, sandstones from all units except the conglomeratic C3 are texturally and compositionally mature, dominated by quartzarenite and subarkosic compositions. These characteristics can be attributed to considerable recycling of older sedimentary strata and crustal sources, along with long distance fluvial and aeolian processes. The analyses of fifteen detrital zircon samples from the Upper Jurassic–Cretaceous strata yielded mainly Archean and Proterozoic zircons. This result suggests that sandstones are likely sourced from the underlying Archean-Paleoproterozoic Congo–Kasai Craton and from nearby Proterozoic mobile belts, particularly the Irumide and Lufilian Belts to the south of the basin. The dominance of Archean and Proterozoic detrital zircons in Upper Jurassic–Cretaceous strata suggests that the Kasai portion of the Congo Basin experienced exhumation and erosion, which is possibly associated with far-field reactivation of Archean and Proterozoic structures during and following Gondwana rifting in the late Mesozoic. A large fluvial drainage network sourced from the south of the basin, is interpreted to have developed across central Africa during the Late Jurassic–Cretaceous. This fluvial system is believed to have flowed northward across the Congo Basin and ultimately drained into a wrench fault system called the Central African Shear Zone, which extends in an ENE direction from the Gulf of Guinea through Cameroon into Sudan and Kenya.     

The regional significance of Cretaceous magmatism and metamorphism in Fiordland, New Zealand, from U–Pb zircon geochronology

The western Fiordland Orthogneiss (WFO) is an extensive composite metagabbroic to dioritic arc batholith that was emplaced at c. 20–25 km crustal depth into Palaeozoic and Mesozoic gneiss during collision and accretion of the arc with the Mesozoic Pacific Gondwana margin. Sensitive high‐resolution ion microprobe U–Pb zircon data from central and northern Fiordland indicate that WFO plutons were emplaced throughout the early Cretaceous (123.6 ± 3.0, 121.8 ± 1.7, 120.0 ± 2.6 and 115.6 ± 2.4 Ma). Emplacement of the WFO synchronous with regional deformation and collisional‐style orogenesis is illustrated by (i) coeval ages of a post‐D1 dyke (123.6 ± 3.0 Ma) and its host pluton (121.8 ± 1.7 Ma) at Mt Daniel and (ii) coeval ages of pluton emplacement and metamorphism/deformation of proximal paragneiss in George and Doubtful Sounds. The coincidence emplacement and metamorphic ages indicate that the WFO was regionally significant as a heat source for amphibolite to granulite facies metamorphism. The age spectra of detrital zircon populations were characterized for four paragneiss samples. A paragneiss from Doubtful Sound shows a similar age spectrum to other central Fiordland and Westland paragneiss and SE Australian Ordovician sedimentary rocks, with age peaks at 600–500 and 1100–900 Ma, a smaller peak at c. 1400 Ma, and a minor Archean component. Similarly, one sample of the George Sound paragneiss has a significant Palaeozoic to Archean age spectrum, however zircon populations from the George Sound paragneiss are dominated by Permo‐Triassic components and thus are markedly different from any of those previously studied in Fiordland.     

Provenance analyses of early Mesozoic sediments in the Ningwu basin: Implications for the tectonic–palaeogeographic evolution of the northcentral North China Craton

This paper reports results from detrital zircon U–Pb geochronology, Hf isotopic geochemistry, sandstone modal analysis, and palaeocurrent analysis of the early Mesozoic strata within the Ningwu basin, China, with the aims of constraining the depositional ages and sedimentary provenances and shedding new light on the Mesozoic tectonic evolution of the northcentral North China Craton (NCC). The zircons from early Mesozoic sandstones are characterized by three major populations: Phanerozoic (late Palaeozoic and early Mesozoic), late Palaeoproterozoic (with a peak at approximately 1.8 Ga), and Neoarchaean (with a peak at approximately 2.5 Ga). Notably, three Phanerozoic zircons in the Early Triassic Liujiagou Formation were found to have positive ε_Hf(t) values and characteristics typical of zircons from the Central Asian Orogenic Belt (CAOB). Therefore, the CAOB began to represent the provenance of sediment in the sedimentary basins in the northern NCC no later than the Early Triassic (261 Ma), implying that the final amalgamation of the NCC and CAOB occurred before the Early Triassic. The U–Pb geochronologic and Hf isotopic results show that the Lower Middle Triassic sediments were mainly sourced from the Yinshan–Yanshan Orogenic Belt (YYOB), and that a sudden change in provenances occurred, shifting from a mixed YYOB and CAOB source in the Middle Jurassic to a primarily YYOB source in the Late Jurassic. The results of the sandstone modal analysis suggest that the majority of the samples from the Lower Middle Jurassic rocks were derived from either Continental Block or Recycled Orogen sources, whereas all the samples from the Upper Jurassic rocks were derived from Mixed sources. The change in source might be ascribed to the southward subduction and closure of the Okhotsk Ocean and the resulting intense uplift of the YYOB during the Late Jurassic. This uplift likely represents the start of the Yanshan Orogeny.     

Tectonic evolution of the Malay Peninsula

The Malay Peninsula is characterised by three north–south belts, the Western, Central, and Eastern belts based on distinct differences in stratigraphy, structure, magmatism, geophysical signatures and geological evolution. The Western Belt forms part of the Sibumasu Terrane, derived from the NW Australian Gondwana margin in the late Early Permian. The Central and Eastern Belts represent the Sukhothai Arc constructed in the Late Carboniferous–Early Permian on the margin of the Indochina Block (derived from the Gondwana margin in the Early Devonian). This arc was then separated from Indochina by back-arc spreading in the Permian. The Bentong-Raub suture zone forms the boundary between the Sibumasu Terrane (Western Belt) and Sukhothai Arc (Central and Eastern Belts) and preserves remnants of the Devonian–Permian main Palaeo-Tethys ocean basin destroyed by subduction beneath the Indochina Block/Sukhothai Arc, which produced the Permian–Triassic andesitic volcanism and I-Type granitoids observed in the Central and Eastern Belts of the Malay Peninsula. The collision between Sibumasu and the Sukhothai Arc began in Early Triassic times and was completed by the Late Triassic. Triassic cherts, turbidites and conglomerates of the Semanggol “Formation” were deposited in a fore-deep basin constructed on the leading edge of Sibumasu and the uplifted accretionary complex. Collisional crustal thickening, coupled with slab break off and rising hot asthenosphere produced the Main Range Late Triassic-earliest Jurassic S-Type granitoids that intrude the Western Belt and Bentong-Raub suture zone. The Sukhothai back-arc basin opened in the Early Permian and collapsed and closed in the Middle–Late Triassic. Marine sedimentation ceased in the Late Triassic in the Malay Peninsula due to tectonic and isostatic uplift, and Jurassic–Cretaceous continental red beds form a cover sequence. A significant Late Cretaceous tectono-thermal event affected the Peninsula with major faulting, granitoid intrusion and re-setting of palaeomagnetic signatures.     

Late Tournaisian conodonts from the Taungnyo Group near Loi Kaw,Myanmar (Burma): Implications for Shan Plateau stratigraphy and evolution of the Gondwana-derived Sibumasu Terrane

Carboniferous conodonts are reported for the first time from Myanmar (Burma). Conodont faunas representative of the Scaliognathus anchoralis and Gnathodus typicus–Protognathodus cordiformis conodont zones date the sampled Taungnyo Group south of Loi Kaw, Kayah State as late Tournaisian confirming a Mississippian (Lower Carboniferous) age for the sampled part of this stratigraphic unit. The dated strata are stratigraphically just below the Tournaisian–Visean (T-V) boundary. Tournaisian strata are thus for the first time unequivocally demonstrated in the Shan Plateau region of Myanmar. Similar conodont faunas from the T-V boundary interval in SE Asia indicate a complete stratigraphic sequence at this level in shallow-marine sequences on intra-Tethyan Cathaysian tectonic blocks (South China) and in deep-marine Palaeo-Tethyan sediments (cherts of the Inthanon suture zone, Thailand). However, in shallow-marine sequences on the Sibumasu Block, located on the NE margin of Gondwana in the Carboniferous, they demonstrate a non-sequence or unconformity at this level, also seen elsewhere in Gondwana. Biogeographic links between upper Tournaisian and early Visean conodonts on the Sibumasu Terrane and Laurentia and Eastern Australian Gondwana support a NW Australian Gondwana margin position for Sibumasu in the Late Palaeozoic.