Microstructural evolution of the Seridó Belt, NE-Brazil: the effect of two tectonic events on development of c-axis preferred orientation in quartz

The polyphase evolution of the Seridó Belt (NE-Brazil) includes D₁ crust formation at 2.3–2.1 Ga, D₂ thrust tectonics at 1.9 Ga and crustal reworking by D₃ strike-slip shear zones at 600 Ma. Microstructural investigations within mylonites associated with D₂ and D₃ events were used to constrain the tectono-thermal evolution of the belt. D₂ shear zones commenced at deeper crustal levels and high amphibolite facies conditions (600–650 °C) through grain boundary migration, subgrain rotation and operation of quartz c-prism slip. Continued shearing and exhumation of the terrain forced the re-equilibration of high-T fabrics and the switching of slip systems from c-prism to positive and negative a-rhombs. During D₃, enhancement of ductility by dissipation of heat that came from syn-D₃ granites developed wide belts of amphibolite facies mylonites. Continued shearing, uplift and cooling of the region induced D₃ shear zones to act in ductile-brittle regimes, marked by fracturing and development of thinner belts of greenschist facies mylonites. During this event, switching from a-prism to a-basal slip indicates a thermal path from 600 to 350 °C. Therefore, microstructures and quartz c-axis fabrics in polydeformed rocks from the Seridó Belt preserve the record of two major events, which includes contrasting deformation mechanisms and thermal paths.     

Structures,kinematic analysis,rheological parameters and temperature-pressure estimate of the Mesozoic Xingcheng-Taili ductile shear zone in the North China Craton

The NE to ENE trending Mesozoic Xingcheng-Taili ductile shear zone of the northeastern North China Craton was shaped by three phases of deformation. Deformation phase D₁ is characterized by a steep, generally E–W striking gneissosity. It was then overprinted by deformation phase D₂ with NE-sinistral shear with K-feldspar porphyroclasts forming a subhorizontal low-angle stretching lineation on a steep foliation. During deformation phase D₃, lateral motion accommodated by ENE sinistral strike-slip shear zones dominated. Associated fabrics developed at upper greenschist metamorphic facies conditions and show the deformation characteristics of middle- to shallow crustal levels. In some parts, the older structures have been in turn overprinted by late-stage sinistral D₃ shearing. Finite strain and kinematic vorticity in all deformed granitic rocks indicate a prolate ellipsoid (L-S tectonites) near plane strain. Simple shear-dominated general shear during D₃ deformation is probably of general significance. The quartz c-axis textures indicate prism-gliding with a dominant rhomb <a> slip and basal <a> slip system formed mainly at low-middle temperatures. Mineral deformation behavior, quartz c-axis textures, quartz grain size and the Kruhl thermometer demonstrate that the ductile shear zone developed under greenschist facies metamorphic conditions at deformation temperatures ranging from 400 to 500 °C. Dislocation creep is the main deformation mechanism at a shallow crustal level. Fractal analysis showed that the boundaries of recrystallized quartz grains had statistically self-similarities. Differential stresses deduced from dynamically recrystallized quartz grain size are at around 20–39 MPa, and strain rates in the order of 10⁻¹² to 10⁻¹⁴ s⁻¹. This indicates deformation of granitic rocks in the Xingcheng-Taili ductile shear zone at low strain rates, which is consistent with most other ductile shear zones. Hornblende-plagioclase thermometer and white mica barometer indicate metamorphic conditions of medium pressures at around ca. 3–5 kbar and temperatures of 400–500 °C within greenschist facies conditions. The main D₃ deformation of the ENE-trending sinistral strike-slip ductile shearing is related to the roll-back of the subducting Pacific plate beneath the North China Craton.     

Kinematic and rheological model of exhumation of high pressure granulites in the Variscan orogenic root: example of the Blanský les granulite, Bohemian Massif, Czech Republic

Summary A large-scale relict domain of granulite facies deformation fabrics has been identified within the Blansky les granulite body. The granulite facies mylonitic fabric is discordant to the dominant amphibolite facies structures of the surrounding retrograde granulite. The complex geometry of retrograde amphibolite facies fabric indicates a large-scale fold-like structure, which is interpreted to be a result of either crustal-scale buckling of an already exhumed granulite sheet or active rotation of a rigid granulite facies ellipsoidal domain in kinematic continuity with the regional amphibolite facies deformation. We argue that both concepts allow similar restoration of the original granulite facies fabrics prior to the amphibolite facies deformation and “folding”. The geometry of the granulite facies foliations coincides with the earliest fabrics in the nearby mid-crustal units suggesting complete mechanical coupling between the deep lower crust and the mid-crustal levels during the vertical movements of crustal materials. Microstructures indicate grain-size sensitive flow enhanced by the presence of silicate melts at deep crustal levels and a beginning of an exhumation process of low viscosity granulites through a vertical channel. The amphibolite facies fabrics developed at middle crustal levels and their microstructures indicate significant hardening of feldspar-made rigid skeleton of the retrograde granulite. Increase in the strength of the granulite allowed an active buckling or a rigid body rotation of the granulite sheet, which acted as a strong layer inside the weaker metasediments.     

Temporal links between pluton emplacement,garnet granulite metamorphism,partial melting and extensional collapse in the lower crust of a Cretaceous magmatic arc,Fiordland, New Zealand

Garnet granulite facies mid‐to lower crust in Fiordland, New Zealand, provides evidence for pulsed intrusion and deformation occurring in the mid‐to lower crust of magmatic arcs. ²³⁸U‐²⁰⁶Pb zircon ages constrain emplacement of the ～595 km² Malaspina Pluton to 116–114 Ma. Nine Sm‐Nd garnet ages (multi‐point garnet‐rock isochrons) ranging from 115.6 ± 2.6 to 110.6 ± 2.0 Ma indicate that garnet granulite facies metamorphism was synchronous or near synchronous throughout the pluton. Hence, partial melting and garnet granulite facies metamorphism lasted <5 Ma and began within 5 Ma of pluton emplacement. Garnet granulite facies L‐S tectonites in the eastern part of the Malaspina Pluton record the onset of extensional strain and arc collapse. An Sm‐Nd garnet age and thermobarometric results for these rocks directly below the amphibolite facies Doubtful Sound shear zone provide the oldest known age for extension in Fiordland at ≥112.8 ± 2.2 Ma at ～920 °C and 14–15 kbar. Narrow high Ca rims in garnet from some of these suprasolidus rocks could reflect a ≤ 1.5 kbar pressure increase, but may be largely a result of temperature decrease based on the Ca content of garnet predicted from pseudosections. At peak metamorphic conditions >900 °C, garnet contained ～4000 ppm Ti; subsequently, rutile inclusions grew during declining temperature with limited pressure change. Garnet granulite metamorphism of the Malaspina Pluton is c. 10 Ma younger than similar metamorphism of the Pembroke Granulite in northern Fiordland; therefore, high‐P metamorphism and partial melting must have been diachronous for this >3000 km² area of mid‐to‐lower crust. Thus, two or more pulses of intrusion shortly followed by garnet granulite metamorphism and extensional strain occurred from north to south along the axis of the lower crustal root of the Cretaceous Gondwana arc.     

Syn-kinematic emplacement of the Pangong metamorphic and magmatic complex along the Karakorum Fault (N Ladakh)

This paper investigates the age, P–T conditions and kinematics of Karakorum Fault (KF) zone rocks in the NW part of the Himalaya–Karakorum belt. Granulite to greenschist facies assemblages were developed within the KF zone during strike-slip shearing. The granulites were formed at high temperature (800 °C, 5.5 kbar), were subsequently retromorphosed into the amphibolite facies (700–750 °C, 4–5 kbar) and the greenschist facies (350–400 °C, 3–4 kbar). The Tangtse granite emplaced syn-kinematically at the contact between a LT and the HT granulite facies. Intrusion occurred during the juxtaposition of the two units under amphibolite conditions. Microstructures observed within the Tangtse granite exhibit a syn-magmatic dextral S–C fabric. Compiled U–Pb and Ar–Ar data show that in the central KF segment, granulite facies metamorphism occurred at a minimum age of 32 Ma, subsequent amphibolite facies metamorphism at 20–18 Ma. Further shearing under amphibolite facies (650–500 °C) was recorded at 13.6 ± 0.9 Ma, and greenschist-facies mica growth at 11 Ma. These data give further constrains to the age of initiation and depth of the Karakorum Fault. The granulite-facies conditions suggest that the KF, accommodating the lateral extrusion of Tibet, could be at least a crustal or even a Lithosphere-scale shear zone comparable to other peri-Himalayan faults.     

Fabric development during shear deformation in the Main Central Thrust Zone, NW-Himalaya, India

Quartz microfabrics and associated microstructures have been studied on a crustal shear zone—the Main Central Thrust (MCT) of the Himalaya. Sampling has been done along six traverses across the MCT zone in the Kumaun and Garhwal sectors of the Indian Himalaya. The MCT is a moderately north-dipping shear zone formed as a result of the southward emplacement of a part of the deeply rooted crust (that now constitutes the Central Crystalline Zone of the Higher Himalaya) over the less metamorphosed sedimentary belt of the Lesser Himalaya. On the basis of quartz c- and a-axis fabric patterns, supported by the relevant microstructures within the MCT zone, two major kinematic domains have been distinguished. A noncoaxial deformation domain is indicated by the intensely deformed rocks in the vicinity of the MCT plane. This domain includes ductilely deformed and fine-grained mylonitic rocks which contain a strong stretching lineation and are composed of low-grade mineral assemblages (muscovite, chlorite and quartz). These rocks are characterized by highly asymmetric structures/microstructures and quartz c- and a-axis fabrics that indicate a top-to-the-south sense that is compatible with south-directed thrusting for the MCT zone. An apparently coaxial deformation domain, on the other hand, is indicated by the rocks occurring in a rather narrow belt fringing, and structurally above, the noncoaxial deformation domain. The rocks are highly feldspathic and coarse-grained gneisses and do not possess any common lineation trend and the effects of simple shear deformation are weak. The quartz c-axis fabrics are symmetrical with respect to foliation and lineation. Moreover, these rocks contain conjugate and mutually interfering shear bands, feldspar/quartz porphyroclasts with long axes parallel to the macrosopic foliation and the related structures/microstructures, suggesting deformation under an approximate coaxial strain path.On moving towards the MCT, the quartz c- and a-axis fabrics become progressively stronger. The c-axis fabric gradually changes from random to orthorhombic and then to monoclinic. In addition, the coaxial strain path gradually changes to the noncoaxial strain path. All this progressive evolution of quartz fabrics suggests more activation of the basal, rhomb and a slip systems at all structural levels across the MCT.     

Long-term deformation and fluid-enhanced mass transport in a Variscan peridotite shear zone in the Ivrea Zone,northern Italy: a microtextural,petrological and geochemical study of a reactivated shear zone

The microtextural, petrological and geochemical study of a ductile shear zone in the phlogopite peridotite of Finero/Ivrea Zone (northern Italy) reveals the long-term deformation of this zone. The zone is divided into a protomylonitic and an ultramylonitic part. Both parts reflect different periods of deformation, although the orientation of the mineral lineations does not change. In the coarse-grained part (period 1) the deformation started under granulite facies conditions (about 775°C). Olivine, ortho- and clinopyroxene and phlogopite recrystallized dynamically. In the ultramylonitic part relics of the granulite facies event and evidence for a continuous or two-stage deformation history under amphibolite facies (minimum 640°C) to upper greenschist facies conditions (maximum 520°C) are preserved (period 2). Amphibolite facies conditions are indicated by olivine recrystallization, the monoclinization of orthopyroxene porphyroclasts and the recrystallization and chemical changes of clinopyroxene. The greenschist facies final stage of period 2 is characterized by decreased X _{CO 2} and the syntectonic formation of antigorite, tremolite and phlogopite at the expense of recrystallized and porphyroclastic olivine and pyroxene. Between both deformation periods a short break in deformation continuity is probable. Continuous deformation or reactivation in shear zones of the Ivrea Zone has not been described so far. During the granulite facies shearing, small amounts of channelized fluid flow led to a slight mass transfer. The shear zone shows a moderate enrichment of Na, Ba, Cu, Cs, H₂O and CO₂ and a small loss of P. The mass balance of the ultramylonite indicates a significant increase in mass transport. A mass gain can be inferred for H, Na, K, Ba, Al, Ti, P, S, Cs, Sr, Rb, C, Zn, Zr, S, Sc, light rare earth elements, Nb, Cl and Au. The zone is depleted in Ca, Cu, Co, F and Ni. Si, Mg, Cr, Mn, Y, Nb and V are constant within analytical error. Deformation and fluid infiltration led to a change in volume which increases during the granulite facies event by 5.7% and during the lower temperature phase by 3.3%. The calculated fluid to rock ratios by standard equations results in unrealistically high values. For the interpretation of highly deformed rocks with drastic grain size reduction it is therefore necessary to consider the enhanced diffusion, which is mainly controlled by the increased grain boundary surface.     

Tectonic framework of the Precambrian of Madagascar and its Gondwana connections: a review and reappraisal

The Precambrian of Madagascar is divided into two sectors by the north-west trending sinistral Ranotsara shear zone, which continues in the Mozambique belt, probably as the Surma shear zone, and in Southern India as the Achankovil shear zone. South of Ranotsara six north-south trending tectonic belts are recognized that consist largely of granulite and high amphibolite facies paragneisses, phlogopite diopsidites, concordant granites and granulites. North of Ranotsara the central-northern segment is traversed by a north-trending axial 100–150 km wide dextral shear zone of probable Pan-African age, which was metamorphosed under granulite and high amphibolite facies conditions and which has reworked older basement. This shear zone continues across southern India as the Palghat-Cauvery shear zone. Major stratiform basic -ultrabasic complexes occur in the axial zone and in the basement to the west. Well preserved low grade continental margin-type sediments (quartzites, mica schists and stromatolitic marbles) of Kibaran age are present in western Madagascar. Two partly greenschist grade sedimentary groups lie unconformably on high grade basement in north-east Madagascar. Isotopic age data suggest the presence in Madagascar of Archaean, Early and Mid-Proterozoic crustal material that was extensively reworked in Pan-African times.     

Metamorphic path constrained by metapelitic rocks from the inner Aiuruoca-Andrelândia nappe, south of the São Francisco craton, SE Brazil

A Nappe system south to southwest of the São Francisco Craton represents the southern extension of the Brasília belt and describes an inverted metamorphic pile of greenschist facies toward amphibolite facies. The Aiuruoca-Andrelândia nappe is one of the nappes of this system. The hind portion of the Aiuruoca-Andrelândia nappe, south of Caxambu and Aiuruoca (MG), consists of a structural-metamorphic domain transported toward the E-NE. There is a metamorphic transition, from the kyanite zone to kyanite and sillimanite coexistence, until the sillimanite zone. Metapelitic rocks preserve high-pressure parageneses (Rt–Ky–Grt–Ms–Bt–Pl–Qtz) and contain retrograde eclogitic rocks. Sil–Pl–Qtz coronitic intergrowths around garnets are common decompressive textures. Kyanite schists register the P_max of 11 kbar at 660 °C and define a decompressive path until 6–7.5 kbar at 650 °C. These P–T conditions represent the equilibrium in S₂ schistosity (amphibolite facies) and the beginning of the cooling path in the Ky–Sil transition. The decompressive path suggests an extrusional process, immediately after burying at about 60 km. Exhumation controlled by convergent events, related to the São Francisco Plate subduction and tectonic erosion, took these units, isothermally, to higher levels (20–33 km). Later, the metamorphic path shifted toward near-isobaric cooling.     

Ar/Ar mineral ages from basement rocks in the Eastern Kunlun Mountains, NW China, and their tectonic implications

⁴⁰Ar/³⁹Ar dating and estimates of regional metamorphic P–T conditions were carried out on the basement rocks of the Eastern Kunlun Mountains, Western China. Samples from the Jinshuikou, Xiaomiao, Kuhai, Wanbaogou, and Nachitai groups revealed distinct metamorphic events and four age groups. The age group in the range from 363 to 439 Ma is interpreted to represent cooling after Middle Silurian–Late Devonian granulite(?) and amphibolite facies metamorphism, which is dominated by low–middle pressure/high temperature conditions. This tectono-thermal event is related to the closure of an oceanic basin or marginal sea. An age group of 212–242 Ma represents cooling after Triassic metamorphic overprint, which is probably associated with magmatic intrusions. This thermal event, together with the Permo-Triassic ophiolite zone along the South Kunlun Fault, relates to the closure of a major ocean (between India and Eurasia) and the eventual N-ward accretion of the Qiangtang block in Permo-Triassic times. The significance of the age group of 104–172 Ma may be related to the ductile deformation along the Xidatan fault due to the northward-directed accretion of the Lhasa block. Biotites from Nachitai record a partial isotopic resetting at ca. 32 Ma that is interpreted to represent a late-stage exhumation caused by further crustal shortening.     

Unusual transition in quartzite dislocation creep regimes and crystal slip systems in the aureole of the Eureka Valley–Joshua Flat–Beer Creek pluton, California: a case for anhydrous conditions created by decarbonation reactions

Microstructures and quartz c-axis fabrics were analyzed in five quartzite samples collected across the eastern aureole of the Eureka Valley–Joshua Flat–Beer Creek composite pluton. Temperatures of deformation are estimated to be 740±50 °C based on a modified c-axis opening angle thermometer of Kruhl (J. Metamorph. Geol. 16 (1998) 142). In quartzite layers located closest (140 m) to the pluton-wall rock contact, flattened detrital grains are plastically deformed and partially recrystallized. The dominant recrystallization process is subgrain rotation (dislocation creep regime 2 of Hirth and Tullis (J. Struct. Geol. 14 (1992) 145)), although grain boundary migration (dislocation creep regime 3) is also evident. Complete recrystallization occurs in quartzite layers located at a distance of 240 m from the contact, and coincides with recrystallization taking place dominantly through grain boundary migration (regime 3). Within the quartzites, strain is calculated to be lowest in the layers closest to the pluton margin based on the aspect ratios of flattened detrital grains.The c-axis fabrics indicate that a slip operated within the quartzites closest to the pluton-wall rock contact and that with distance from the contact the operative slip systems gradually switch to prism [c] slip. The spatial inversion in microstructures and slip systems (apparent “high temperature” deformation and recrystallization further from the pluton-contact and apparent “low temperature” deformation and recrystallization closer to the pluton-contact) coincides with a change in minor phase mineral content of quartzite samples and also in composition of the surrounding rock units. Marble and calc-silicate assemblages dominate close to the pluton-wall rock contact, whereas mixed quartzite and pelite assemblages are dominant further from the contact.We suggest that a thick marble unit located between the pluton and the quartzite layers acted as a barrier to fluids emanating from the pluton. Decarbonation reactions in marble layers interbedded with the inner aureole quartzites and calc-silicate assemblages in the inner aureole quartzites may have produced high X_CO2 (water absent) fluids during deformation. The presence of high X_CO2 fluid is inferred from the prograde assemblage of quartz+calcite (and not wollastonite)+diopside±K-feldspar in the inner aureole quartzites. We suggest that it was these “dry” conditions that suppressed prism [c] slip and regime 3 recrystallization in the inner aureole and resulted in a slip and regime 2 recrystallization, which would normally be associated with lower deformation temperatures. In contrast, the prograde assemblage in the pelite-dominated outer part of the aureole is biotite+K-feldspar. These “wet” pelitic assemblages indicate fluids dominated by water in the outer part of the aureole and promoted prism [c] slip and regime 3 recrystallization. Because other variables could also have caused the spatial inversion of c-axis fabrics and recrystallization mechanisms, we briefly review those variables known to cause a transition in slip systems and dislocation creep regimes in quartz. Our conclusions are based on a small number of samples, and therefore, the unusual development of crystal fabrics and microstructures in the aureole to the EJB pluton suggests that further study is needed on the effect of fluid composition on crystal slip system activity and recrystallization mechanisms in naturally deformed rocks.     

Anatomy of the Mondoñedo Nappe basal shear zone (NW Spain)

This paper analyses a major shear zone from the Iberian Hercynian belt which forms the basal thrust of the Mondoñedo Nappe. The shear zone developed by ductile deformation under amphibolite facies metamorphic conditions and later by brittle-ductile deformation in greenschists facies. Folds in the shear zone are asymmetric, very tight, 1C or similar class and frequently developing sheath geometries. The sheath folds originated by non-coaxial flow superimposed on earlier irregularities. The fabric of quartzitic rocks in the shear zone changes from bottom to top from ultramylonites through blastomylonitic rocks to non-mylonitic tectonites. c-axis fabrics vary across the shear zone, but show a dominant monoclinic symmetry. The blastomylonitic rocks include the fabrics representing the highest temperatures. The main foliation of the schists results from flattening of an earlier foliation, recording occasional microfolds. The use of different kinematic criteria has allowed an analysis of their validity as well as an assessment of movement direction towards the foreland of the orogen.     

Pan-African high pressure granulites from SE-Kenya: Petrological and geothermobarometric evidence for a polycyclic evolution in the Mozambique belt

Two different Pan-African tectono-metamorphic events are recognised in the Taita Hill Tsavo East National Park/Galana river area, SE-Kenya (Mozambique belt) based on petrographic and geothermobarometric evidence. Structurally, this area can be subdivided into four units: (1) the easternmost part of the basement along the Galana river is characterized by subhorizontal slightly to the west and east dipping foliation planes. Migmatic paragneisses with intercalated marbles, calcsilicates and metapelites and bands of amphibolites are the dominant rock type. (2) The western part of the Galana river within the Tsavo East National Park is a ca. 25 km wide shear zone with subvertical foliation planes. The eastern part shows similar rocks as observed in unit 1, while towards west, metasedimentary units become rare and the main rock types are tonalitic gneisses with intercalated amphibolites. (3) A 10 km wide zone (Sagala Hills zone) between the strike slip zone (unit 2) and the Taita Hills (unit 4) is developed. This zone is characterized by elongated and folded felsic migmatic amphibole and garnet bearing orthogneiss bodies with intercalated bands of mafic rocks. (4) The Taita Hills are a slightly to the N dipping nappe stack. The main rock type in the Taita Hills are amphibole–biotite–plagioclase–quartz ± garnet ± clinopyroxene ± scapolite bearing migmatic gneisses with mafic bands. In the southern part, metapelites, marbles and some amphibolites are common.Although the geological structures are different in units 1 and 2, the calculated PT conditions are similar with peak PT of 760–820 °C and 7.5–9.5 kbar. Temperatures in unit 3 (Sagalla Hills zone) and unit 4 (Taita Hills) are slightly higher ca. 760–840 °C, but pressure is significantly higher, ranging from 10 to 12 kbar. Sillimanite growth around kyanite, garnet zonation pattern, mineral reaction textures, and PT calculations constrain a “clock-wise” PT-path with near isobaric cooling following the peak of metamorphism. The different PT conditions, tectonic setting, and a different age of metamorphism are evidence that units 1 and 2 (Galana river) belong to a different tectono-metamorphic event than unit 3 (Sagala Hills zone) and 4 (Taita Hills). The major shear zone (unit 2) marks a tectonic suture dividing the two different tectono-metamorphic domains. It is also likely that it played an important role during exhumation of the granulite facies rocks from units 3 and 4.     

秦岭商丹糜棱岩带石英组构特征变化及成因分析

商丹糜棱岩带岩湾、沙沟和商南等3个区段石英C-轴组构和显微构造特征表明,该带自西向东石英C-轴组构形式由单一环带型转为Y-轴方向的点极密型,然后变为Ⅰ型交叉环带型,构造变形环境从低绿片岩相过渡到中-高绿片岩相,然后变为高绿片岩相-低角闪岩相。构造变形环境差异是造成石英组构形式变化的主要因素。随着温压条件的升高,石英滑移系从以底面〈a〉滑移系和柱面〈a〉滑移系的共同作用为主转向以单一柱面〈a〉滑移系为主,进而底面〈a〉滑移系和柱面〈a〉滑移系又重新变得活跃,且菱面滑移系的作用也变得十分重要。     

Genetic and metamorphic conditions constrained by fluid inclusions from Paleoproterozoic (c. 1.8 Ga) magnesite ore deposits, NE Brazil

Precambrian magnesite occurrences hosted by metadolomites from the Orós belt, Ceará, Brazil, are part of a greenschist–amphibolite, metavolcano-sedimentary terrain, dated at 1.8 Ga, cut by Meso- to Neoproterozoic Brasiliano granites and Neoproterozoic basic sills. These rocks were affected by a shear zone between 580 and 500 Ma. The magnesite-bearing marbles can be grouped as medium-grained (1–9 mm) at the Riacho Fundo ore deposit or sparry magnesite (1–15 cm) at the Cabeça de Negro ore deposit. The sparry magnesite shows textural characteristics related to original sedimentary structures. Both types of magnesite-bearing marbles contain aqueous and aqueous-carbonic fluid inclusions that yield homogenization temperatures between 170 and 370 °C. Applying a pressure correction, these temperatures are compatible with the evolution from greenschist to amphibolite facies metamorphic conditions, as described in previous work on the Orós region. It also agrees with data in specialized literature on the metamorphism of carbonate rocks. Fluid inclusion distribution, composition, and physical-chemical characteristics suggest temperature increase, probably related to metamorphism on these rocks. The medium-grained magnesite records partial contamination of CO₂-rich inclusions by relict carbonaceous material (bitumen, hydrocarbons?) that favors, but does not confirm, a syngenetic sedimentary origin and could have caused the lowering of CO₂ melting point in these inclusions. Therefore, though textural evidence points to a sedimentary-diagenetic model, fluid inclusions record conditions of a metamorphic event.     

Strain distribution within a km-scale,mid-crustal shear zone: The Kuckaus Mylonite Zone,Namibia

The subvertical Kuckaus Mylonite Zone (KMZ) is a km-wide, crustal-scale, Proterozoic, dextral strike-slip shear zone in the Aus granulite terrain, SW Namibia. The KMZ was active under retrograde, amphibolite to greenschist facies conditions, and deformed felsic (and minor mafic) gneisses which had previously experienced granulite facies metamorphism during the Namaqua Orogeny. Lenses of pre- to syn-tectonic leucogranite bodies are also deformed in the shear zone. Pre-KMZ deformation (D₁) is preserved as moderately dipping gneissic foliations and tightly folded migmatitic layering. Shear strain within the KMZ is heterogeneous, and the shear zone comprises anastomosing high strain ultramylonite zones wrapping around less deformed to nearly undeformed lozenges. Strain is localized along the edge of leucogranites and between gneissic lozenges preserving D₁ migmatitic foliations. Strain localization appears controlled by pre-existing foliations, grain size, and compositional anisotropy between leucogranite and granulite. The local presence of retrograde minerals indicate that fluid infiltration occurred in places, but most ultramylonite in the KMZ is free of retrograde minerals. In particular, rock composition and D₁ fabric heterogeneity are highlighted as major contributors to the strain distribution in time and space, with deformation localization along planes of rheological contrast and along pre-existing foliations. Therefore, the spatial distribution of strain in crustal-scale ductile shear zones may be highly dependent on lithology and the orientation of pre-existing fabric elements. In addition, foliation development and grain size reduction in high strain zones further localizes strain during progressive shear, maintaining the anastomosing shear zone network established by the pre-existing heterogeneity.     

Development of fluid conduits in the auriferous shear zones of the Hutti Gold Mine, India: evidence for spatially and temporally heterogeneous fluid flow

The gold mineralization of the Hutti Mine is hosted by nine parallel, N–S trending, steeply dipping, 2–10 m wide shear zones, that transect Archaean amphibolites. The shear zones were formed after peak metamorphism during retrograde ductile D₂ shearing in the lower amphibolite facies. They were reactivated in the lower to mid greenschist facies by brittle–ductile D₃ shearing and intense quartz veining. The development of a S₂–S₃ crenulation cleavage facilitates the discrimination between the two deformation events and contemporaneous alteration and gold mineralization. Ductile D₂ shearing is associated with a pervasively developed distal chlorite–sericite alteration assemblage in the outer parts of the shear zones and the proximal biotite–plagioclase alteration in the center of the shear zones. D₃ is characterized by development of the inner chlorite-K-feldspar alteration, which forms a centimeter-scale alteration halo surrounding the laminated quartz veins and replaces earlier biotite along S₃. The average size of the laminated vein systems is 30–50 m along strike as well as down-dip and 2–6 m in width.Mass balance calculations suggest strong metasomatic changes for the proximal biotite–plagioclase alteration yielding mass and volume increase of ca. 16% and 12%, respectively. The calculated mass and volume changes of the distal chlorite–sericite alteration (ca. 11%, ca. 8%) are lower. The decrease in δ¹⁸O values of the whole rock from around 7.5‰ for the host rocks to 6–7‰ for the distal chlorite–sericite and the proximal biotite–plagioclase alteration and around 5‰ for the inner chlorite-K-feldspar alteration suggests hydrothermal alteration during two-stage deformation and fluid flow.The ductile D₂ deformation in the lower amphibolite facies has provided grain scale porosities by microfracturing. The pervasive, steady-state fluid flow resulted in a disseminated style of gold–sulfide mineralization and a penetrative alteration of the host rocks. Alternating ductile and brittle D₃ deformation during lower to mid greenschist facies conditions followed the fault-valve process. Ductile creep in the shear zones resulted in a low permeability environment leading to fluid pressure build-up. Strongly episodic fluid advection and mass transfer was controlled by repeated seismic fracturing during the formation of laminated quartz(-gold) veins. The limitation of quartz veins to the extent of earlier shear zones indicate the importance of pre-existing anisotropies for fault-valve action and economic gold mineralization.     

Timing and tectonic setting of Grenvillian metamorphism—constraints from a transect along Georgian Bay,Ontario*

Systematic mapping of a transect along the well-exposed shores of Georgian Bay, Ontario, combined with the preliminary results of structural analysis, geochronology and metamorphic petrology, places some constraints on the geological setting of high-grade metamorphism in this part of the Central Gneiss Belt. Correlations within and between map units (gneiss associations) have allowed us to recognize five tectonic units that differ in various aspects of their lithology, metamorphic and plutonic history, and structural style. The lowest unit, which forms the footwall to a regional decollement, locally preserves relic pre-Grenvillian granulite facies assemblages reworked under amphibolite facies conditions during the Grenvillian orogeny. Tectonic units above the decollement apparently lack the early granulite facies metamorphism; out-of-sequence thrusting in the south produced a duplex-like structure. Two distinct stages of Grenvillian metamorphism are apparent. The earlier stage (c. 1160–1120 Ma) produced granulite facies assemblages in the Parry Sound domain and upper amphibolite facies assemblages in the Parry Island thrust sheet. The later stage (c. 1040–1020 Ma) involved widespread, dominantly upper amphibolite facies metamorphism within and beneath the duplex. Deformation and metamorphism recently reported from south and east of the Parry Sound domain at c. 1100–1040 Ma have not yet been documented along the Georgian Bay transect. The data suggest that early convergence was followed by a period of crustal thickening in the orogenic core south-east of the transect area, with further advance to the north-west during and after the waning stages of this deformation.     

Exhumation of the lower crust during crustal shortening: an Alice Springs (380 Ma) age for a prograde amphibolite facies shear zone in the Strangways Metamorphic Complex (central Australia)

Foliated garnet-bearing amphibolites occur within the West Bore Shear Zone, cutting through granulite facies gneisses of the Strangways Metamorphic Complex. In the amphibolites, large euhedral garnet (up to 3 cm) occurs within fine-grained recrystallized leucocratic diffusion haloes of plagioclase–quartz. The garnet and their haloes include a well-developed vertical foliation, also present in the matrix. This foliation is the same as that cutting through the unconformably overlying Neoproterozoic Heavitree Quartzite. The textures indicate syn- to late kinematic growth of the amphibolite facies mineral assemblages.
All mineral assemblages record an arrested prograde reaction history. Noteworthy is the growth of garnet at the expense of hornblende and plagioclase, and the breakdown of staurolite–hornblende to give plagioclase–gedrite. These dehydration reactions indicate increasing P – T  conditions during metamorphism, and suggest heating towards the end of a period of intense deformation. Temperature estimates for the garnet–amphibolite and related staurolite–hornblende assemblages from the shear zone are about 600 °C. Pressure is estimated at about 5 kbar.
An Sm–Nd isochron gives an age of 381±7 Ma for the peak metamorphism and associated deformation. This age determination confirms that amphibolite facies conditions prevailed during shear zone development within the Strangways Metamorphic Complex during the Alice Springs Orogeny. These temperature conditions are significantly higher than those expected at this depth assuming a normal geothermal gradient. The Alice Springs Orogeny was associated with significant crustal thickening, allowing exhumation of the granulite facies, Palaeoproterozoic, lower crust. Along-strike variations of the tectonic style suggest a larger amount of crustal shortening in the eastern part of the Alice Springs Orogeny.     

The deformation and recrystallization of biotite in the Woodroffe Thrust mylonite zone

The deformation and recrystallization microstructures in biotite from the Woodroffe Thrust mylonites are described and interpreted. The degree of strain causing recrystallization and the nucleation mechanisms differ across the mylonite zone. These differences are associated with the contrast in water content between the granulite and amphibolite facies felsic gneisses on either side of the zone. p]In moderately mylonitized granulite facies felsic gneisses (0.1–0.6% H₂O) subgrains form in intensely deformed host biotite and recrystallization mechanisms involve subgrain rotation both on host grain boundaries and associated with kink band bulge. In the amphibolite facies felsic gneisses (0.9–1.2% H₂O) the biotite recrystallizes by a mechanism involving localized internal kinking of the host and subsequent migration of high angle boundaries generated on the kink limbs. This combined with rotation due to the concurrent deformation generates high angle grain boundaries around the entire original kink limb and thus a new grain.