Early history of the Izu–Bonin – Mariana arc system: Evidence from Belau and the Palau Trench

Volcanic rocks of the Kyushu–Palau Ridge (KPR) from Deep Sea Drilling Project (DSDP) site 448 and from Belau comprise a low-to-medium-K arc tholeiitic series. Belau rocks include (probable) Mid-Eocene low-Ca type-3 boninite and pre-Early Oligocene–Early Miocene low-K arc tholeiitic basalt, basaltic andesite, andesite and dacite. Palau Trench samples include sparsely phyric high-Mg, -Cr and -Ni rocks which resemble the Belau boninite and Izu–Bonin – Mariana (IBM) system boninites. The high-Mg Palau Trench samples also resemble other primitive arc lavas (e.g. arc picrites). Their chemistry suggests an origin involving steep thermal gradients in multiply depleted mantle. Subduction of hot, young lithosphere under a young hot upper plate is postulated to explain this occurrence. The KPR is inferred to be the source of Eocene boninite and arc tholeiitic terranes presently in forearc regions of the IBM system. A model is presented here showing how many IBM boninites may have originated in a small area near Belau. These have migrated eastward by episodic back-arc opening accompanying eastward migration of arcs and trenches. Oldest known KPR rocks ( ca 47.5 Ma at DSDP site 296), and presumed KPR-derived exotic terranes of Guam ( ca 43.8 Ma), presage the postulated Eocene ( ca 42–43 Ma) change in Pacific plate motion invoked as the cause of subduction initiation at the KPR. The KPR has been rotated more than 40° clockwise since the Eocene, thus the age mismatch may indicate a different tectonic style, for example transtension or transpression, in earliest KPR history.     

U–Pb ages of granitoids around the Kofu basin: Implications for the Neogene geotectonic evolution of the South Fossa Magna region,central Japan

The Japanese archipelago underwent two arc–arc collisions during the Neogene. Southwest Honshu arc collided with the Izu‐Bonin‐Mariana arc and the northeast Honshu arc collided with the Chishima arc. The complicated geological structure of the South Fossa Magna region has been attributed to the collision between the Izu‐Bonin‐Mariana arc and the southwest Honshu arc. Understanding the geotectonic evolution of this tectonically active region is crucial for delineating the Neogene tectonics of the Japanese archipelago. Many intrusive granitoids occur around the Kofu basin, in the South Fossa Magna region. Although the igneous ages of these granitoids have been mainly estimated through biotite and hornblende K–Ar dating, here, we perform U–Pb dating of zircon to determine the igneous ages more precisely. In most cases, the secondary post‐magmatic overprint on the zircon U–Pb system was minor. Based on our results, we identify four groups of U–Pb ages: ca 15.5 Ma, ca 13 Ma, ca 10.5 Ma, and ca 4 Ma. The Tsuburai pluton belongs to the first group, and its age suggests that the granite formation within the Izu‐Bonin‐Mariana arc dates back to at least 15.5 Ma. The granitoids of the second group intruded into the boundary between the Honshu arc and the ancient Izu‐Bonin‐Mariana arc, suggesting that the arc–arc collision started by ca 13 Ma. As in the case of the Kaikomagatake pluton, the Chino pluton likely corresponds to a granodiorite formed in a rear‐arc setting in parallel with the other granodiorites of the third group. The U–Pb age of the Kogarasu pluton, which belongs to the fourth group, is the same as those of the Tanzawa tonalitic plutons. This might support a syncollisional rapid granitic magma formation in the South Fossa Magna region.     

40Ar/ 39Ar and K–Ar geochronological age constraints for the inception and early evolution of the Izu–Bonin – Mariana arc system

K–Ar and ⁴⁰Ar/³⁹Ar dates are presented for locations in the Izu–Bonin – Mariana (IBM) forearc (Ocean Drilling Program (ODP) sites 786 & 782, Chichijima, Deep Sea Drilling Program (DSDP) sites 458 & 459, Saipan), and Palau on the remnant arc of the Kyushu–Palau Ridge. For a number of these locations, the ⁴⁰Ar/³⁹Ar plateau and ³⁶Ar/⁴⁰Ar versus ³⁹Ar/⁴⁰Ar isochrons give older ages than the K–Ar results. The most important results are: (i) at site 786, initial construction of the proto-IBM (now forearc) basement occurred at least by ca 47–45 Ma, consistent with the age of the immediately overlying sediments (middle Eocene nannofossil Zone CP13c); the younger pulse of construction dated at ca 35 Ma by K–Ar could not be confirmed by ⁴⁰Ar/³⁹Ar analysis; (ii) ⁴⁰Ar/³⁹Ar ages for the initial construction of the Mariana portion of the IBM system are as old as those of the Izu–Bonin portion, for example at site 458, initial construction commenced at least by ca 49 Ma and at ca 47 Ma at Saipan (Sankakayuma Formation); and (iii) a combination of K–Ar and ⁴⁰Ar/³⁹Ar ages indicate continued boninite magmatism in the Izu–Bonin forearc (and remnant arc at Palau) until ca 35 Ma. Subduction inception including boninite series rocks along most of the exposed length of the IBM system, clearly preceded by some 5 million years the Middle Eocene (ca 43.5 Ma) change in Pacific plate motion. Boninitic series magmatism persisted at locations now exposed in the forearc for ～ 15 million years after arc inception concurrently with low-K tholeiitic series eruptions from a subaerial arc system, established at ≥ 40 Ma, on the Kyushu–Palau Ridge. For the Mariana portion of the IBM system, reconstruction of the proto-arc places this activity adjacent to the concurrent but orthogonally spreading Central Basin Ridge of the West Philippine Basin. It is possible that a combination of subduction of a young North New Guinea Plate beneath newly created back-arc basin crust may account for some of the features of the Mariana system. It is clear, however, that the understanding of the processes of subduction initiation and early IBM arc development is incomplete.     

Arc–arc collision in the Izu collision zone, central Japan, deduced from the Ashigara Basin and adjacent Tanzawa Mountains

The Pleistocene Ashigara Basin and adjacent Tanzawa Mountains, Izu collision zone, central Japan, are examined to better understand the development of an arc–arc orogeny, where the Izu–Bonin – Mariana (IBM) arc collides with the Honshu Arc. Three tectonic phases were identified based on the geohistory of the Ashigara Basin and the denudation history of the Tanzawa Mountains. In phase I, the IBM arc collided with the Honshu Arc along the Kannawa Fault. The Ashigara Basin formed as a trench basin, filled mainly by thin-bedded turbidites derived from the Tanzawa Mountains together with pyroclastics. The Ashigara Basin subsided at a rate of 1.7 mm/year, and the denudation rate of the Tanzawa Mountains was 1.1 mm/year. The onset of Ashigara Basin Formation is likely to be older than 2.2 Ma, interpreted as the onset of collision along the Kannawa Fault. Significant tectonic disruption due to the arc–arc collision took place in phase II, ranging from 1.1 to 0.7 Ma in age. The Ashigara Basin subsided abruptly (4.6 mm/year) and the accumulation rate increased to approximately 10 times that of phase I. Simultaneously, the Tanzawa Mountains were abruptly uplifted. A tremendous volume of coarse-grained detritus was provided from the Tanzawa Mountains and deposited in the Ashigara Basin as a slope-type fan delta. In phase III, 0.7–0.5 Ma, the entire Ashigara Basin was uplifted at a rate of 3.6 mm/year. This uplift was most likely caused by isostatic rebound resulting from stacking of IBM arc crust along the Kannawa Fault which is not active as the decollement fault by this time. The evolution of the Ashigara Basin and adjacent Tanzawa Mountains shows a series of the development of the arc–arc collision; from the subduction of the IBM arc beneath the Honshu Arc to the accretion of IBM arc crust onto Honshu. Arc–arc collision is not the collision between the hard crusts (massif) like a continent–continent collision, but crustal stacking of the subducting IBM arc beneath the Honshu Arc intercalated with very thick trench fill deposits.     

Dredge petrology of the boninite‐ and adakite‐bearing Hahajima Seamount of the Ogasawara (Bonin) forearc: An ophiolite or a serpentinite seamount?§

Abstract During the Hakuho‐Maru KH03‐3 cruise and the Tansei‐Maru KT04‐28 cruise, more than 1000 rock samples were dredged from several localities over the Hahajima Seamount, a northwest–southeast elongated, rectangular massif, 60 km × 30 km in size, with a flat top approximately 1100 m deep. The rocks included almost every lithology commonly observed among the on‐land ophiolite outcrops. Volcanic rocks included mid‐oceanic ridge basalt (MORB)‐like tholeiitic basalt and dolerite, calc‐alkaline basalt and andesite, boninite, high‐Mg adakitic andesite, dacite, and minor rhyolite. Gabbroic rocks included troctolite, olivine gabbro, olivine gabbronorite (with inverted pigeonite), gabbro, gabbronorite, norite, and hornblende gabbro, and showed both MORB‐type and island arc‐type mineralogies. Ultramafic rocks were mainly depleted mantle harzburgite (spinel Cr? 50–80) and its serpentinized varieties, with some cumulate dunite, wehrlite and pyroxenites. This rock assemblage suggests a supra‐subduction zone origin for the Hahajima Seamount. Compilation of the available dredge data indicated that the ultramafic rocks occur in the two northeast–southwest‐oriented belts on the seamount, where serpentinite breccia and gabbro breccia have also developed, but the other areas are free from ultramafic rocks. Although many conical serpentinite seamounts 10 km in size are aligned along the Izu–Ogasawara (Bonin)–Mariana forearc, the Hahajima Seamount may be better interpreted as a fault‐bounded, uplifted massif composed of ophiolitic thrust sheets, resembling the Izki block of the Oman ophiolite in its shape and size. The ubiquitous roundness of the dredged rocks and their thin Mn coating (<2 mm) suggest that the Hahajima Seamount was uplifted above sealevel and wave‐eroded, like the present Macquarie Is., a rare example of ophiolite exposure in an oceanic setting. The Ogasawara Plateau on the Pacific Plate is adjacent to the east of the Hahajima Seamount, and collision and subduction of the plateau may have caused uplift of the forearc ophiolite body.     

Migration of a volcanic front inferred from K–Ar ages of late Miocene to Pliocene volcanic rocks in central Japan

K–Ar ages have been determined for 14 late Miocene to Pliocene volcanic rocks in the north of the Kanto Mountains, Japan, for tracking the location of the volcanic front through the time. These samples were collected from volcanoes located behind the trench–trench–trench (TTT) triple junction of the Pacific, Philippine Sea, and North American plates. This junction is the site of subduction of slabs of the Pacific and the Philippine Sea plates, both of which are thought to have influenced magmatism in this region. The stratigraphy and K–Ar ages of volcanic rocks in the study area indicate that volcanism occurred between the late Miocene and the Pliocene, and ceased before the Pleistocene. Volcanism in adjacent areas of the southern NE Japan and northern Izu–Bonin arcs also occurred during the Pliocene and ceased at around 3 Ma with the westward migration of the volcanic front, as reported previously. Combining our new age data with the existing data shows that before 3 Ma the volcanic front around the TTT junction was located about 50 km east of the preset‐day volcanic front. We suggest that northward subduction of the Philippine Sea Plate slab ended at ～3 Ma as a result of collision between the northern margin of the plate with the surface of the Pacific Plate slab. This collision may have caused a change in the subduction vector of the Philippine Sea Plate from the original north‐directed subduction to the present‐day northwest‐directed subduction. This indicates that the post ～3 Ma westward migration of the volcanic front was a result of this change in plate motion.     

Insights into operation of the subduction factory from the oxygen isotopic values of the southern Izu–Bonin–Mariana Arc

Abstract Oxygen is the most abundant element in the earth, and isotopic analysis of this element in island arc lavas potentially provides sensitive constraints on the proportion of oxygen recycled from subducted material, relative to that extracted from the mantle. Here we report on 225 new oxygen isotopic analyses of whole‐rock and glass samples, and clinopyroxene separates, from lavas collected from the southernmost 1500 km of the Izu–Bonin–Mariana (IBM) convergent margin. Whole‐rock samples clustered around a mean of 6.11 ± 0.47‰, whereas Mariana Trough glasses and mafic melts, calculated to be in equilibrium with mafic phenocrysts, clustered narrowly around a mean of 5.7‰. These data demonstrate that unequivocal identification of magmatic oxygen requires analysis of fresh glass or mafic minerals, and that the source of southern IBM Arc melts is entirely, or almost entirely, in equilibrium with normal mantle oxygen. If the elemental enrichments characteristic of the subduction component originate in subducted materials, these oxygen isotopic data are most consistent with the interaction of a small amount of sediment melt (<4%; mostly less than 1%) with mantle peridotite to yield the hybrid mantle that melts to form IBM Arc magmas.     

Timing of collision of the Kohistan–Ladakh Arc with India and Asia: Debate

The Kohistan–Ladakh Arc in the Himalaya–Karakoram region represents a complete section of an oceanic arc where the rocks from mantle to upper crustal levels are exposed. Generally this arc was regarded as of Jurassic–Cretaceous age and was welded to Asia and India by Northern and Southern Sutures respectively. Formation of this arc, timings of its collisions with Asia and India, and position of collision boundaries have always been controversial. Most authors consider that the arc collided with Asia first during 102–75 Ma and then with India during 55–50 Ma, whereas others suggest that the arc collided with India first at or before 61 Ma, and then the India–arc block collided with Asia ca 50 Ma. Recently published models of the later group leave several geological difficulties such as an extremely rapid drifting rate of the Indian Plate (30 ± 5 cm/year) northwards between 61–50 Ma, absence of a large ophiolite sequence and accretionary wedge along the Northern Suture, obduction of ophiolites and blueschists along the Southern Suture, and the occurrence of a marine depositional environment older than 52 Ma in the Indian Plate rocks south of the Southern Suture. We present a review based on geochemical, stratigraphic, structural, and paleomagnetic data to show that collision of the arc with Asia happened first and with India later.     

Collisional bending of the western Paleo‐Kuril Arc deduced from paleomagnetic analysis and U–Pb age determination

The Paleo‐Kuril Arc in the eastern Hokkaido region of Japan, the westernmost part of the Kuril Arc in the northwestern Pacific region, shows a tectonic bent structure. This has been interpreted, using paleomagnetic data, to be the result of block rotations in the Paleo‐Kuril Arc. To understand the timing and origin of this tectonic bent structure in the Paleo‐Kuril arc‐trench system, paleomagnetic surveys and U–Pb radiometric dating were conducted in the Paleogene Urahoro Group, which is distributed in the Shiranuka‐hill region, eastern Hokkaido. The U–Pb radiometric dating indicated that the Urahoro Group was deposited at approximately 39 Ma. Paleomagnetic analysis of the Urahoro Group suggested that the Shiranuka‐hill region experienced a 28° clockwise rotation with respect to East Asia. The degree of clockwise rotation implied from the Urahoro Group is smaller than that of the underlying Lower Eocene Nemuro Group (62°) but larger than that of the overlying Onbetsu Group (?9°). It is thus suggested that the Shiranuka‐hill region experienced a clockwise rotation of approximately 34° between the deposition of the Nemuro and Urahoro Groups (50–39 Ma), and a 38° clockwise rotation between the deposition of the Urahoro and Onbetsu Groups (39–34 Ma). The origin of the curved tectonic belt of the Paleo‐Kuril Arc was previously explained by the opening of the Kuril Basin after 34 Ma. The age constraint for the rotational motion of the Shiranuka‐hill region in this study contradicts this hypothesis. Consequently, it is suggested that the process of arc–arc collision induced the bent structure of the western Paleo‐Kuril Arc.     

The subduction of the Paleo‐Pacific Plate to the Jiamusi Block: Evidence from the Early Mesozoic sedimentary rocks of the eastern Jiamusi Block

In order to provide references of the subduction process of the Paleo‐Pacific Plate beneath the Jiamusi Block, this paper studied the clastic rocks of the Nanshuangyashan Formation using modal analysis of sandstones, mudstone elements geochemistry, and detrital zircon U–Pb dating. These results suggest the maximum depositional age of the Nanshuangyashan Formation was between the Norian and Rhaetian (206.8 ±4.6 Ma, mean standard weighted deviation (MSWD) = 0.17). Whole‐rock geochemistry of mudstone indicates that source rocks of the Nanshuangyashan Formation were primarily felsic igneous rocks and quartzose sedimentary rocks, which were mainly derived from the stable continental block and a magmatic arc. Detrital zircon analysis showed the Nanshuangyashan Formation samples recorded four main age groups: 229–204 Ma, 284–254 Ma, 524–489 Ma and 930–885 Ma, and the provenances were attributed to the Jiamusi Block and a Late Triassic magmatic arc near the study area. Furthermore, the eastern Jiamusi Block was a backarc basin, affected by the subduction of the Paleo‐Pacific Plate in the Late Triassic, but the magmatic arc related to the subduction near the study area finally died out due to tectonic changes and stratigraphic erosion.     

The earliest stage of Izu rear‐arc volcanism revealed by drilling at Site U1437, International Ocean Discovery Program Expedition 350

The International Ocean Discovery Program Expedition 350 drilled between two Izu rear‐arc seamount chains at Site U1437 and recovered the first complete succession of rear‐arc rocks. The drilling reached 1806.5 m below seafloor. In situ hyaloclastites, which had erupted before the rear‐arc seamounts came into existence at this site, were recovered in the deepest part of the hole (～15–16 Ma). Here it is found that the composition of the oldest rocks recovered does not have rear‐arc seamount chain geochemical signatures, but instead shows affinities with volcanic front or some of the extensional zone basalts between the present volcanic front and the rear‐arc seamount chains. It is suggested that following the opening of the Shikoku back‐arc Basin, Site U1437 was a volcanic front or a rifting zone just behind the volcanic front, and was followed at ~ 9 Ma by the start of rear‐arc seamount chains volcanism. This geochemical change records variations in the subduction components with time, which might have followed eastward moving of hot fingers in the mantle wedge and deepening of the subducting slab below Site U1437 after the cessation of Shikoku back‐arc Basin opening.     

Cenozoic geodynamic evolution of the Andaman–Sumatra subduction margin: Current understanding

The Andaman–Sumatra margin displays a unique set‐up of extensional subduction–accretion complexes, which are the Java Trench, a tectonic (outer arc) prism, a sliver plate, a forearc, oceanic rises, inner‐arc volcanoes, and an extensional back‐arc with active spreading. Existing knowledge is reviewed in this paper, and some new data on the surface and subsurface signatures for operative geotectonics of this margin is analyzed. Subduction‐related deformation along the trench has been operating either continuously or intermittently since the Cretaceous. The oblique subduction has initiated strike–slip motion in the northern Sumatra–Andaman sector, and has formed a sliver plate between the subduction zone and a complex, right‐lateral fault system. The sliver fault, initiated in the Eocene, extended through the outer‐arc ridge offshore from Sumatra, and continued through the Andaman Sea connecting the Sagaing Fault in the north. Dominance of regional plate dynamics over simple subduction‐related accretionary processes led to the development and evolution of sedimentary basins of widely varied tectonic character along this margin. A number of north–south‐trending dismembered ophiolite slices of Cretaceous age, occurring at different structural levels with Eocene trench‐slope sediments, were uplifted and emplaced by a series of east‐dipping thrusts to shape the outer‐arc prism. North–south and east–west strike–slip faults controlled the subsidence, resulting in the development of a forearc basins and record Oligocene to Miocene–Pliocene sedimentation within mixed siliciclastic–carbonate systems. The opening of the Andaman Sea back‐arc occurred in two phases: an early (～11 Ma) stretching and rifting, followed by spreading since 4–5 Ma. The history of inner‐arc volcanic activity in the Andaman region extends to the early Miocene, and since the Miocene arc volcanism has been associated with an evolution from felsic to basaltic composition.     

SHRIMP U–Pb zircon dating of the Kinshozan Quartz Diorite from the Kanto Mountains,Japan: Implications for late Paleozoic granitic activity in Japanese Islands

The new result of SHRIMP U–Pb zircon dating of the Kinshozan Quartz Diorite from the Kanto Mountains, Japan, provides 281.5 ± 1.8 Ma. The age is 30 m.y. older than the available age of the Kinshozan Quartz Diorite obtained by hornblende K–Ar method. The new U–Pb zircon age represents the time of crystallization of the Kinshozan Quartz Diorite. The hornblende K–Ar age indicates the time that the Kinshozan Quartz Diorite cooled down to 500 °C which is the closure temperature of the systematics. Permian granites are found in small exposures in Japan, and frequently referred to as 250 Ma granites. The Kinshozan Quartz Diorite is considered as a type of the 250 Ma granites, and the age was influential in establishing a model of Paleozoic tectonic evolution for the Japanese Islands. The new age of the Kinshozan Quartz Diorite provides the opportunity to re‐examine the model. The Kinshozan Quartz Diorite and other Permian granites in the south of the Median Tectonic Line of Japan were constituents of the Paleo‐Ryoke Belt. The geochemical characteristics of the granitic rocks in the Paleo‐Ryoke Belt indicated that the granitic rocks were formed in a primitive island arc environment, and the new trace element data also support this interpretation. Examination of the available data and results of the present study suggests the late Paleozoic granitic activity in Japan as follows. At about 310–290 Ma, arc magmatism generated adakitic granites and other granites in the South Kitakami Belt. Quartz diorite and tonalites of primitive characteristic, such as the Kinshozan Quartz Diorite and granites in the Maizuru Belt appear to have been formed at the immature island arc, and accreted to the Japanese Islands at the end of Paleozoic or early Mesozoic era. During 260–240 Ma, granitic activity took place in the Hida and Maizuru Belts as a part of the Asian continent.     

Late Cretaceous uplift history of the Cretaceous volcanic arc in Southwest Japan: Provenance analysis of the Yuasa–Aridagawa basin based on U–Pb zircon ages

The Ryoke Metamorphic complex has undergone low‐P/T metamorphism and was intruded by granitic magmas around 100 Ma. Subsequently, the belt was uplifted and exposed by the time deposition of the Izumi Group began. The tectonic history of uplift, such as the timing and processes, are poorly known despite being important for understanding the spatiotemporal evolution of the Ryoke Metamorphic Belt. U–Pb zircon ages from sedimentary rocks in the forearc and backarc basins are useful for constraining uplift and magmatism in the provenance. U–Pb dating of detrital zircons from 12 samples (four sandstones and eight granitic clasts) in the Yuasa–Aridagawa basin, a Cretaceous forearc basin in the Chichibu Belt of Southwest Japan, gave mostly ages of 60–110 Ma. Granitic clasts contained in conglomerate suggest that granitic intrusions predate the formation of Coniacian and Maastrichtian conglomerate. Emplacement ages of granitic bodies originated from granitic clasts in Coniacian conglomerate are (110.2 ±1.3) Ma, (106.1 ±1.8) Ma, (101.8+5.8–3.8) Ma, and (95.3 ±1.4) Ma; for granitic clasts in Maastrichtian conglomerate, (89.6 ±1.8) Ma, (87.3+2.4–1.8) Ma, (85.7 ±1.2) Ma, and (82.7 ±1.2) Ma. The results suggest that detrital zircons in the sandstones were mainly derived from volcanic eruptions contemporaneous with depositional age, and plutonic rocks of the Ryoke Metamorphic Belt. Zircon ages of the granitic clast samples also indicate that uplift in the provenance began after Albian and occurred at least during the Coniacian to Maastrichtian. Our results, together with the difference of provenance between backarc and forearc basins suggest that the southern marginal zone of the Ryoke Metamorphic Belt was uplifted and supplied a large amount of clastic materials to the forearc basins during the Late Cretaceous.     

Nature and growth rate of the Northern Izu–Bonin (Ogasawara) arc crust and their implications for continental crust formation

The bulk composition of the continental crust throughout geological history is thought by most previous workers to be andesitic. This assumption of an andesitic bulk composition led to an early hypothesis by 72 ) that the continental crust was created by arc magmatism. This hypothesis for the origin of continental crust was challenged by several authors because: (i) the mean rate of arc crust addition obtained by 50 ) is too small to account for some certain phases of rapid crustal growth; and (ii) the bulk composition of ocean island arcs, the main contributor to the Archean and early Proterozoic crust, is basaltic rather than andesitic ( 4 ; 49 ). New data from the Northern Izu–Bonin arc are presented here which support the 72 ) hypothesis for the origin of the continental crust by andesitic arc magma. A geological interpretation of P wave crustal structure obtained from the Northern Izu–Bonin arc by 66 ) indicates that the arc crust has four distinctive lithologic layers: from top to bottom: (i) a 0.5–2-km-thick layer of basic to intermediate volcaniclastic, lava and hemipelagite (layer A); (ii) a 2–5-km-thick basic to intermediate volcaniclastics, lavas and intrusive layer (layer B); (iii) a 2–7-km-thick layer of felsic (tonalitic) rocks (layer C); and (iv) a 4–7-km-thick layer of mafic igneous rocks (layer D). The chemical composition of the upper and middle part of the northern Izu–Bonin arc is estimated to be similar to the average continental crust by 73 ). The rate of igneous addition of the Northern Izu–Bonin arc since its initial 45-Ma magmatism was calculated as 80 km³/km per million years. This rate of addition is considered to be a reasonable estimate for all arcs in the western Pacific. Using this rate, the global rate of crustal growth is estimated to be 2.96 km³/year which exceeds the average rate of crustal growth since the formation of the Earth (1.76 km³/year). Based on this estimate of continental growth and the previously documented sediment subduction and tectonic erosion rate (1.8 km³/year, 24 ), several examples of growth curves of the continental crust are presented here. These growth curves suggest that at least 50% of the present volume of the continental crust can be explained by arc magmatism. This conclusion indicates that arc magmatism is the most important contributor to the formation of continental crust, especially at the upper crustal level.     

Paleomagnetic constraints on Miocene rotation in the central Japan Arc

We present new Middle Miocene paleomagnetic data for the central Japan Arc, and discuss their implications for Miocene rotation. To obtain a refined paleodirection, we made magnetic measurements on basaltic to andesitic lavas and intrusive rocks from 12 sites in the Tsugu volcanic rocks (ca 15 Ma) in the northern part of the Shitara area, Japan. Significant secondary magnetizations in samples with strong magnetic intensities are interpreted as lightning‐induced components. Mean directions carried by magnetite and/or titanomagnetite were determined for all sites. An overall mean direction with a northerly declination was obtained from dual‐polarity site means for nine sites. This direction is indistinguishable from the mean direction for coeval parallel dikes in the northern part of the Shitara area, and also indistinguishable from the Miocene reference direction derived from the paleopole for the North China Block in the Asian continent. These comparisons suggest little or no rotation or latitudinal motion in the study area with respect to the North China Block since 15 Ma. We obtained a refined early Middle Miocene paleodirection (D = 9.7°, I = 52.5°, α₉₅ = 4.8°; 30 sites) and paleopole (82.0°N, 230.8°E, A₉₅ = 5.6°) for Shitara by combining data from the Tsugu volcanic rocks and a coeval dike swarm. An anomalous direction found at three sites could be a record of an extraordinary field during a geomagnetic polarity transition or excursion. Paleomagnetic data from Shitara suggest that: (i) the western wing of the Kanto Syntaxis, a prominent cuspate geologic structure in central Honshu, underwent a counterclockwise rotation with respect to the main part of the southwestern Japan Arc between ca 17.5 Ma and 15 Ma; (ii) collision between the Japan and Izu–Bonin (Ogasawara) Arcs began prior to 15 Ma; and (iii) clockwise rotation of the entire southwestern part of the Japan Arc had ceased by 15 Ma.     

One Million Years tephra record at IODP Sites U1436 and U1437: Insights into explosive volcanism from the Japan and Izu arcs

The 1 Myr tephra records of IODP (International Ocean Discovery Program) Holes U1436A and U1437B in the Izu‐Bonin fore‐ and reararc were investigated in order to assess provenance and eruptive volumes, respectively. In total, 304 tephra samples were examined and 260 primary tephra layers were identified. Tephra provenance was determined by means of major and trace element compositions of glass shards and distinguished between Japan and Izu‐Bonin arc origin of the tephra layers. A total of 33 marine tephra compositions were correlated to the Japan arc and 227 to the Izu arc. Twenty marine tephra layers were correlated between the two drilling sites. Additionally, we defined eleven correlations of marine tephra deposits to major widespread Japanese eruptions; from the 1.05 Ma Shishimuta‐Pink Tephra to the 30 ka Aira‐Tn Tephra, both from Kyushu Island. These eruptions provide independent time markers within the sediment record and six correlations were used to date tephra layers from Japan in Hole U1436A to establish an alternative age model for this hole. Furthermore, the minimum distal tephra volumes of all detected events were calculated, which enabled the comparison of the tephra volumes that derived from the Japan and the Izu‐Bonin arcs. For some of the major Japanese eruptions these are the first volume estimations that also include distal deposits. All of the Japanese tephras derived from events with eruption magnitude M_v ≥ 5.6 and three of the investigated eruptions reach magnitudes M_v ≥ 7. Volcanic events of the Izu‐Bonin arc have mostly eruption magnitudes M_v ≤ 5.     

Late Carboniferous – Middle Permian arc/forearc‐related basin in Central Asian Orogenic Belt: Insights from the petrology and geochemistry of the Shuangjing Schist in Inner Mongolia,China

The Solonker Suture Zone is thought to record the terminal evolution of the Central Asian Orogenic Belt (CAOB) in Inner Mongolia. However, two contrasting interpretations of the timing of suturing of the Solonker Suture Zone exist: (i) Permian to Early Triassic; and (ii) Middle Devonian or Late Devonian to Carboniferous. The Shuangjing Schist is exposed in the Linxi area along the Xar Moron Fault Zone, which marks the southern boundary of the Solonker Suture Zone in the eastern section of the CAOB, and thus provides insight into the timing of suturing of the Solonker Suture Zone. Detailed and systematic analysis of the petrology and geochemistry of the Shuangjing Schist shows that the Shuangjing Schist developed by greenschist facies prograde metamorphism of a volcanisedimentary rock series protolith. The volcanic parts of the Shuangjing Schist are a calc‐alkaline series with large volumes of intermediate members and subordinate acidic members. Volcanism occurred in a magmatic arc on the continental margin and was induced by subduction‐related magmatism resulting from mantle metasomatism. The sedimentary parts of the Shuangjing Schist reflect a transition from continental shelf to abyssal plain sedimentation. The formation of the Shuangjing Schist is suggested to be related to closure of an arc/forearc‐related ocean basin. The timing is constrained by a laser ablation inductively coupled plasma–mass spectrometry (LA‐ICP–MS) U–Pb magmatic zircon age of 298 ± 2 Ma from a carbonaceous biotite–plagioclase schist that was intruded by granite at 272 ± 2 Ma. In the Linxi area, southward subduction of the arc/forearc basin led to uplift, thickening, collapse, and erosion of the overriding continental crust. Collapse induced extension and widespread magmatism along the volcanic arc at the northern margin of the North China Craton. The closure of the arc/forearc‐related oceanic basin led to the formation of Late Permian to Middle Triassic collisional granites and the subsequent end of the collision of the Solonker Suture Zone.     

Origin of the early Cenozoic belt boundary thrust and Izanagi–Pacific ridge subduction in the western Pacific margin

The belt boundary thrust within the Cretaceous–Neogene accretionary complex of the Shimanto Belt, southwestern Japan, extends for more than ~ 1 000 km along the Japanese islands. A common understanding of the origin of the thrust is that it is an out of sequence thrust as a result of continuous accretion since the late Cretaceous and there is a kinematic reason for its maintaining a critically tapered wedge. The timing of the accretion gap and thrusting, however, coincides with the collision of the Paleocene–early Eocene Izanagi–Pacific spreading ridges with the trench along the western Pacific margin, which has been recently re‐hypothesized as younger than the previous assumption with respect to the Kula‐Pacific ridge subduction during the late Cretaceous. The ridge subduction hypothesis provides a consistent explanation for the cessation of magmatic activity along the continental margin and the presence of an unconformity in the forearc basin. This is not only the case in southwestern Japan, but also along the more northern Asian margin in Hokkaido, Sakhalin, and Sikhote‐Alin. This Paleocene–early Eocene ridge subduction hypothesis is also consistent with recently acquired tomographic images beneath the Asian continent. The timing of the Izanagi–Pacific ridge subduction along the western Pacific margin allows for a revision of the classic hypothesis of a great reorganization of the Pacific Plate motion between ~ 47 Ma and 42 Ma, illustrated by the bend in the Hawaii–Emperor chain, because of the change in subduction torque balance and the Oligocene–Miocene back arc spreading after the ridge subduction in the western Pacific margin.     

Timescale of magma chamber processes revealed by U–Pb ages,trace element contents and morphology of zircons from the Ishizuchi caldera,Southwest Japan Arc

U–Pb geochronology and trace element chemistry of zircons in a microscale analysis were applied to the Ishizuchi caldera in the Outer Zone of Southwest Japan in order to estimate the timescale of the magma process, in particular, the magma differentiation. This caldera is composed mainly of ring fault complexes, major pyroclastic flow deposits, and felsic intrusion including central plutons. Using SHRIMP‐IIe, our new U–Pb zircon ages obtained from the major pyroclastic flow deposits (Tengudake pyroclastic flow deposits), granitic rocks from central plutons (Soushikei granodiorite and Teppoishigawa quartz monzonite), and rhyolite from the outer ring dike (Tenchuseki rhyolite) and the inner ring dike (Bansyodani rhyolite) are 14.80 ±0.11 Ma, 14.56 ±0.10 Ma, 14.53 ±0.12 Ma, 14.55 ±0.11 Ma and 14.21 ±0.19 Ma, respectively. Based on the U–Pb ages, the Hf contents and the REE patterns of the zircons, three stages are recognized in the evolutionary history of the magma chamber beneath the Ishizuchi caldera: (i) climactic Tengudake pyroclastic flow eruption; (ii) Tenchuseki rhyolite intrusion into the outer ring dike and central pluton intrusion; and (iii) Bansyodani rhyolite intrusion in the inner ring dike. These results indicate a magma evolution history of the Ishizuchi caldera system which took at least ca 600 kyr from the climatic caldera‐forming eruption to the post‐caldera intrusions. Our new geochronological data suggest that the Ishizuchi caldera formed as part of the voluminous and episodic magmatism that occurred in the wide zone along the Miocene forearc basin of Southwest Japan during the inception of the young Philippine Sea Plate subduction.