Temperature–salinity modeling for Ruwais coastal area in United Arab Emirates

A three dimensional rectangular grid model is applied to resolve the temperature–salinity dynamics of Ruwais, a segment of the UAE coast which is well known as dense water formation zone. The model employs a heat flux module and a turbulence closure scheme that facilitate realistic calculation of temperature–salinity dynamics. A field survey campaign is carried out to support the modeling study, involving measurements of tide, currents, temperature, and salinity. Investigation is done for two meteorologically extreme conditions, i.e. summer and winter. The model study showed that the western flux develops an anticlockwise circulation in the study area. The water industrial discharges elevated the temperature and salinity of the water near the southeastern shoreline. This water mass propagated towards north under the influence of gravity.     

Horizontal patterns of water temperature and salinity in an estuarine tidal channel: Ria de Aveiro

This work presents results from two complementary and interconnected approaches to study water temperature and salinity patterns in an estuarine tidal channel. This channel is one of the four main branches of the Ria de Aveiro, a shallow lagoon located in the Northwest coast of the Iberian Peninsula. Longitudinal and cross-sectional fields of water temperature and salinity were determined by spatial interpolation of field measurements. A numerical model (Mohid) was used in a 2D depth-integrated mode in order to compute water temperature and salinity patterns. The main purpose of this work was to determine the horizontal patterns of water temperature and salinity in the study area, evaluating the effects of the main forcing factors. The field results were depth-integrated and compared to numerical model results. These results obtained using extreme tidal and river runoff forcing, are also presented. The field results reveal that, when the river flow is weak, the tidal intrusion is the main forcing mechanism, generating saline and thermal fronts which migrate with the neap/spring tidal cycle. When the river flow increases, the influence of the freshwater extends almost as far as the mouth of the lagoon and vertical stratification is established. Results of numerical modelling reveal that the implemented model reproduces quite well the observed horizontal patterns. The model was also used to study the hydrology of the study area under extreme forcing conditions. When the model is forced with a low river flow (1 m³ s⁻¹) the results confirm that the hydrology is tidally dominated. When the model is forced with a high river flow (1,000 m³ s⁻¹) the hydrology is dominated by freshwater, as would be expected in such an area.     

Variability of dense water formation in the Ross Sea

This paper presents results from a model study of the interannual variability of high salinity shelf water (HSSW) properties in the Ross Sea. Salinity and potential temperature of HSSW formed in the western Ross Sea show oscillatory behaviour at periods of 5–6 and 9 years superimposed on long-term fluctuations. While the shorter oscillations are induced by wind variability, variability on the scale of decades appears to be related to air temperature fluctuations. At least part of the strong decrease of HSSW salinities deduced from observations for the period 1963–2000 is shown to be an aliasing artefact due to an undersampling of the periodic signal. While sea ice formation is responsible for the yearly salinity increase that triggers the formation of HSSW, interannual variability of net freezing rates hardly affects changes in the properties of the resulting water mass. Instead, results from model experiments indicate that the interannual variability of dense water characteristics is predominantly controlled by variations in the shelf inflow through a sub-surface salinity and a deep temperature signal. The origin of the variability of inflow characteristics to the Ross Sea continental shelf can be traced into the Amundsen and Bellingshausen Seas. The temperature anomalies are induced at the continental shelf break in the western Bellingshausen Sea by fluctuations of the meridional transport of circumpolar deep water with the eastern cell of the Ross Gyre. In the Amundsen Sea, upwelling due to a persistently cyclonic wind field carries the signal into the surface mixed layer, leading to fluctuations of the vertical heat flux, anomalies of brine release near the sea ice edge, and consequently to a sub-surface salinity anomaly. With the westward flowing coastal current, both the sub-surface salinity and deep temperature signals are advected onto the Ross Sea continental shelf. Convection carries the signal of salinity variability into the deep ocean, where it interacts with modified circumpolar deep water upwelled onto the continental shelf as the second source water mass of HSSW. Sea ice formation on the Ross Sea continental shelf thus drives the vertical propagation of the signal rather than determining the signal itself.     

Ore-forming fluids in the dongping gold deposit, northwestern Hebei Province

The Dongping gold deposit is contained within an inner contacting zone of the Hercynian Shuiquangou alkali syenite. The ores occur as veins or as replacement bodies. Fluid inclusion observation shows that in early and main mineralizing stages inclusion types are gas and gas-liquid inclusions, respectively. Gas inclusions occur in isolation in vein quartz, their homog-enization temperature is 372-306°C, and salinity 3.7-1.0 wt% NaCl. Gas-liquid inclusions occur in clusters or healed fractures but do not cut quartz boundary with homogenization temperature 342-267°C and salinity 1.9-0.8 wt% NaCl. Stable isotope measurements show that at main gold mineralization, hydrogen and oxygen isotopic ratios of the mineralizing fluids are -70.8‰-108.4‰ and 2.44‰-4.05‰, respectively. Primary ore fluids in Dongping are higher temperature and lower salinity NaCl-CO₂-H₂O fluids, and come from Yanshanian granitic magmatism. Fluid im-miscibility, fluid-rock interactions and meteoric water adding were main reasons for gold deposition.     

Analysis and modeling of the seasonal South China Sea temperature cycle using remote sensing

The present paper describes the analysis and modeling of the South China Sea (SCS) temperature cycle on a seasonal scale. It investigates the possibility to model this cycle in a consistent way while not taking into account tidal forcing and associated tidal mixing and exchange. This is motivated by the possibility to significantly increase the model’s computational efficiency when neglecting tides. The goal is to develop a flexible and efficient tool for seasonal scenario analysis and to generate transport boundary forcing for local models. Given the significant spatial extent of the SCS basin and the focus on seasonal time scales, synoptic remote sensing is an ideal tool in this analysis. Remote sensing is used to assess the seasonal temperature cycle to identify the relevant driving forces and is a valuable source of input data for modeling. Model simulations are performed using a three-dimensional baroclinic-reduced depth model, driven by monthly mean sea surface anomaly boundary forcing, monthly mean lateral temperature, and salinity forcing obtained from the World Ocean Atlas 2001 climatology, six hourly meteorological forcing from the European Center for Medium range Weather Forecasting ERA-40 dataset, and remotely sensed sea surface temperature (SST) data. A sensitivity analysis of model forcing and coefficients is performed. The model results are quantitatively assessed against climatological temperature profiles using a goodness-of-fit norm. In the deep regions, the model results are in good agreement with this validation data. In the shallow regions, discrepancies are found. To improve the agreement there, we apply a SST nudging method at the free water surface. This considerably improves the model’s vertical temperature representation in the shallow regions. Based on the model validation against climatological in situ and SST data, we conclude that the seasonal temperature cycle for the deep SCS basin can be represented to a good degree. For shallow regions, the absence of tidal mixing and exchange has a clear impact on the model’s temperature representation. This effect on the large-scale temperature cycle can be compensated to a good degree by SST nudging for diagnostic applications.     

Estimation of biogenic substance transport by water masses in Tatar Strait

The conditions of transformations of biogenic substances and the redistribution of their concentrations in the shelf water of Sakhalin Island are studied. Preliminary works have given the results for the water area of La Perouse Strait and Aniva Bay (the Sea of Okhotsk), while this paper gives such results for Tatar Strait (the Sea of Japan). Three electronic instruments of oceanographic studies are applied: an adapted version of Bergen Oceanic Model (for the reconstruction of the space and time distribution of seawater temperature, salinity, and density; the circulation intensity of water masses; and water exchange parameters with nearby water areas and within the strait); GIS “Sakhalin Shelf” (for the reconstruction of annual variations in thermohaline characteristics on a standard grid and horizons of oceanographic stations, and the parameters of the aquatic environment); hydroecological CNPSi-model (for studying the annual dynamics of biogenic element compounds, the biomasses, biohydrochemical activity and bioproduction of microorganisms—bacteria, phytoplankton, and zooplankton, taking part in transformation of biogenic substances and petroleum hydrocarbons, as well as the internal fluxes of biogenic substances governed by the activity of microorganisms and the external load on the marine ecosystem). The results of modeling the spatial transport of biogenic substances through the outer boundaries of Tatar Strait water area and the boundaries of the three areas identified within it are presented and discussed.     

Specific features of water circulation and biogenic substance transformation and transport in Tatar Strait (Sea of Japan): Assessment based on the results of mathematical modeling

This study has no analogues in terms of methodology, as it uses three electronic instruments for studying the oceanographic regime of Tatar Strait. GIS “Sakhalin Shelf” was used to reconstruct annual variations in hydrological and hydrochemical characteristics of the marine environment at standard horizons of oceanographic stations in fixed geographic coordinates. An adapted version of the Oceanic Model created in Bergen University was used to reconstruct the spatial and temporal distribution of seawater temperature and salinity, to calculate the density and the circulation rate of water masses and water exchange parameters between the strait and nearby water areas and between regions within the strait. The hydroecological CNPSi-model was next used to assess the annual dynamics of concentrations of biogenic element compounds; the biomasses, biohydrochemical activity, and bioproductivity of microorganisms (heterotrophic bacteria, three phytoplankton and two zooplankton groups), involved in transformation of biogenic substances, as well as the internal fluxes of biogenic substances, governed by microorganism activity and the external load onto the marine ecosystem. Analysis of calculation results made it possible to reveal new features in water circulation in the strait (including those for winter) and, for the first time, to analyze the transport regime of biogenic substances through the external boundaries of Tatar Strait and through the boundaries of three regions identified within the strait.     

Physical and dynamical oceanography of Liverpool Bay

The UK National Oceanography Centre has maintained an observatory in Liverpool Bay since August 2002. Over 8 years of observational measurements are used in conjunction with regional ocean modelling data to describe the physical and dynamical oceanography of Liverpool Bay and to validate the regional model, POLCOMS. Tidal dynamics and plume buoyancy govern the fate of the fresh water as it enters the sea, as well as the fate of its sediment, contaminants and nutrient loads. In this context, an overview and summary of Liverpool Bay tidal dynamics are presented. Freshwater forcing statistics are presented showing that on average the bay receives 233 m³ s^− 1. Though the region is salinity controlled, river input temperature is shown to significantly modulate the plume buoyancy with a seasonal cycle. Stratification strongly influences the region’s dynamics. Data from long-term moored instrumentation are used to analyse the stratification statistics that are representative of the region. It is shown that for 65% of tidal cycles, the region alternates between being vertically mixed and stratified. Plume dynamics are diagnosed from the model and are presented for the region. The spring–neap modulation of the plume’s westward extent, between 3.5 °W and 4°W, is highlighted. The rapid eastward erosion of the plume during spring tides is identified as a potentially important freshwater mixing mechanism. Novel climatological maps of temperature, salinity and density from the CTD surveys are presented and used to validate numerical simulations. The model is found to be sensitive to the freshwater forcing rates, temperature and salinities. The existing CTD survey grid is shown to not extend sufficiently near the coast to capture the near coastal and vertically mixed component the plume. Instead the survey grid captures the westward spreading, shallow and transient, portion of the plume. This transient plume feature is shown in both the long-term averaged model and observational data as a band of stratified fluid stretching between the mouth of the Mersey towards the Isle of Man. Finally the residual circulation is discussed. Long-term moored ADCP data are favourably compared with model data, showing the general northward flow of surface water and southward trajectory of bottom water.     

利用地震数据反演海水温盐结构

利用地震剖面获取海水层温度、盐度、密度等物理参数成为地震海洋学研究的一个重要问题.本文提出了以CTD(Conductivity-Temperature-Depth)温盐深剖面仪观测资料为约束的波阻抗、温-盐结构反演方法.该方法包括两个步骤:首先把少量的CTD作为"约束井"进行地震数据的波阻抗反演;然后利用从CTD资料获得的研究海区的温-盐关系式,结合波阻抗数据反演得到温度和盐度剖面.通过合成数据的试算表明,基于少量的CTD资料控制,利用地震数据可以反演得到高分辨率的二维温度、盐度结构.基于地震数据的温-盐结构反演方法有望弥补传统物理海洋学观测方法的不足,为海洋学研究提供大量的基础数据,有广泛的应用前景.     

Electrical earth resistivity surveying for delineating the characteristics of ground water in a semi‐arid region in the Khanasser Valley,northern Syria

A resistivity survey is conducted in Khanasser Valley, a semi‐arid region in northern Syria, to delineate the characteristics of ground water affected by the salt‐water intrusion related to Al‐Jaboul Sabkha. Existing wells were used to measure salinity and conductivity of water samplings. Vertical electrical sounding was carried out near the existing wells. The combination of resistivity and hydrogeological data enables the establishment of empirical relationships between earth resistivity, water resistivity, and the amount of total dissolved solids. These relationships are then used in order to derive salinity maps for electrode spacings of 70, 100, and 150 m. The distribution of fresh, brackish and salt‐water zones and their variations in space along two longitudinal profiles (LP1 and LP2) are established through converting subsurface depth–resistivity models into different ground‐water areas. The constructed ground‐water area maps allow interfaces between different water zones to be determined. Copyright © 2006 John Wiley & Sons, Ltd.     

Strong tidal currents over two shallow banks in the western subarctic Pacific

The south-flowing waters of the Kamchatka and Oyashio currents are key components of the western subarctic Pacific gyre. The dissipation of tidal energy in shallow and coastal regions of these currents and the attendant mixing are the important processes that affect the upper layer temperature and salinity. Examples of the impact of tidal currents on water temperature and salinity are the persistent tide-driven mixing around the Kashevarov and Kruzenshtern banks. The Kruzenshtern Bank is a shallow submarine bank stretching along the eastern continental slope of the Kuril Islands with the minimum depth of 86 m. Surface drifters observations are used to determine the characteristics of tidal currents and the circulation over these banks. New software that allows more versatility in the harmonic analysis is used for drifter’s data. The two banks have similar features. The variations in current velocities are dominated by the diurnal signals. The K₁ and O₁ tidal ellipses over the banks are the largest and clockwise. The enhanced tidal currents suggest that the formation of cold and saline water in summer is due to mixing of water column over the banks with intermediate waters. Variations of tidal ellipses over the bank may explain the formation of polynya at the western end of the Kashevarov Bank. We found that the 18.6-year lunar nodal cycle is a significant characteristic of salinity variation at the temperature minimum in the eddies eastward of the Boussole Strait over the period 1990–2015.     

Spatial prediction and modeling of soil salinity using simple cokriging,artificial neural networks,and support vector machines in El Outaya plain,Biskra, southeastern Algeria

Soil salinization is one of the most predominant environmental hazards responsible for agricultural land degradation, especially in the arid and semi-arid regions.An accurate spatial prediction and modeling of soil salinity in agricultural land are so important for farmers and decision-makers to develop the appropriate mechanisms to prevent the loss of fertile soil and increase crop production.El Outaya plain is marked by soil salinity increases due to the excessive use of poor groundwater quality for irrigation. This study aims to compare the performance of simple kriging, cokriging(SCOK), multilayer perceptron neural networks(MLP-NN), and support vector machines(SVM)in the prediction of topsoil and subsoil salinity. The field covariates including geochemical properties of irrigation groundwater and physical properties of soil and environmental covariates including digital elevation model and remote sensing derivatives were used as input candidates to SCOK, MLP-NN, and SVM. The optimal input combination was determined using multiple linear stepwise regression(MLSR). The results revealed that the SCOK using field covariates including water electrical conductivity(ECw) and sand percentage(sand %), and environmental covariates including land surface temperature(LST), topographic wetness index(TWI), and elevation could significantly increase the accuracy of soil salinity spatial prediction. The comparison of the prediction accuracy of the different modeling techniques using the Taylor diagram indicated that MLP-NN using LST, TWI, and elevation as inputs were more accurate in predicting the topsoil salinity [ECs(TS)] with a mean absolute error(MAE) of 0.43, root mean square error(RMSE) of 0.6 and correlation coefficient of 0.946. MLP-NN using ECw and sand % as inputs were more accurate in predicting the subsoil salinity [ECs(SS)] with MAE of 0.38, RMSE of0.6, and R of 0.968.     

Diatom assemblages and quantitative reconstruction for paleosalinity from a sediment core of Chencuo Lake,southern Tibet

Changing salinity in lakes and especially in closed lakes depends mainly on the balance between precipitation, runoff and evaporation in arid and semi-arid areas, hence influencing lake levels di-rectly[1-4]. Past salinity has been recovered by a vari-ety of environmental indicators from lake sediments such as diatoms, chironomids, ostracoda, isotopes of ostracoda shells, geochemistry, and isotopes of authi-cabonates[3,5—10]. Recently, with extensive data-base study on diatom-salinity transfe…     

浅海海洋盐度、温度和深度调查的精确度与海水密度计算的关系

一、本文目的海水密度系海水的盐度、温度和压力的连续函数,而在海水的压力每增加1分巴值深度几增加1米的极近似情况下,海水密度即系海水的盐度、温度和深度的连续函数。在必须精确获知海水密度值的要求下,海水的密度是藉它与盐度、温度和压力三者的函数关系计算而得的。为了要使计算所得的海水密度值有一定的精确度,所以海洋盐度、温度和深度调查的精确度就必须有一定的要求。由於中国海皆系浅海,所以本文仅就浅海海洋盐度、温度和深度调查的精确度与海水密度计算的关系加以论述。     

Implementation of a wetting-and-drying model in simulating the Kennebec–Androscoggin plume and the circulation in Casco Bay

A high-resolution coastal ocean model was developed to simulate the temporal/spatial variability of the Kennebec–Androscoggin (K–A) river plume and the circulation in Casco Bay. The model results agree favorably with the moored and shipboard observations of velocity, temperature, and salinity. The surface salinity gradient was used to distinguish the plume from the ambient coastal water. The calculated plume thickness suggests that the K–A plume is surface trapped. Its horizontal scales correlate well with Q ^0.25, where Q is the volume discharge of the rivers. Directional spreading is affected by the wind with the upwelling favorable wind transporting the plume water offshore. Both the wind and the tide also enhance mixing in the plume. The inclusion of a wetting-and-drying (WAD) scheme appears to enhance the mixing and entrainment processes near the estuary. The plume becomes thicker near the mouth of the estuary, the outflow velocity of the plume is weaker, and the radius of the river plume shrinks. The flow field in the model run with the WAD is noisier, not only in shallow areas of Casco Bay but also in the plume and even on the shelf. We speculate that the WAD processes can affect much larger areas than the intertidal zones, especially via a river plume that feeds into a coastal current.     

Assessing the spatial and temporal variability of dissolved organic matter in Liverpool Bay using excitation–emission matrix fluorescence and parallel factor analysis

The spatial and diurnal tidal variability of dissolved organic carbon (DOC) concentrations and the composition of dissolved organic matter (DOM), as evaluated by high-temperature catalytic oxidation and excitation–emission matrix combined with parallel factor analysis (EEM–PARAFAC), respectively, were determined in Liverpool Bay. EEM–PARAFAC modeling resulted in six fluorescent components characterized as terrestrial humic-like (two), microbial humic-like (two), and protein-like (two). The spatial distributions of DOC and the four humic-like components were negatively correlated with salinity in the high-salinity waters observed in this study (30.41–33.75), suggesting that terrestrial DOM was conservatively distributed. The spatial patterns of protein-like components were largely different from those of DOC, humic-like components, and chlorophyll a, suggesting that these distributions were the combined result of production and degradation in the bay in addition to river inputs. These findings suggest that the DOM dynamics in Liverpool Bay are strongly controlled by river-dominated allochthonous DOM inputs with some less significant contributions of autochthonous DOM within the bay. In addition, the temporal variations of DOM associated with the diurnal tidal cycles were determined at one inshore (31.34–32.24 salinity) and one offshore (33.64–33.75 salinity) station in the bay. Negative linear relationships between salinity and DOM characteristics, i.e., DOC, humic-like, and protein-like components, were observed at the inshore station. In contrast, no relationship was observed at the offshore station, suggesting that the export of DOM through rivers and possibly tidal flats have a noticeable influence on DOM concentration and composition up to a relatively elevated salinity of around 33 in Liverpool Bay.     

利用反射地震数据和XBT数据联合反演海水的温盐分布

利用地震数据反演海水的温盐分布是地震海洋学研究的一个重要方向.本文分析了采集于伊比利亚半岛西南缘海域的GOLR12低频地震数据和同步观测的XBT(eXpendable BathyThermograph)、CTD(Conductivity-Temperature-Depth)资料,将叠后约束波阻抗反演方法应用到海水温度、盐度剖面的计算当中,计算结果显示这种反演方法可以提供水平分辨率为6.25 m的温度和盐度资料,温度的精度约为0.16 ℃,可以为物理海洋学研究提供高横向分辨率的基础数据.     

Seasonal variation of water column structure and sediment transport in a mud depo-center off the Zhejiang-Fujian coast in China

Two surveys were conducted in December, 2008, and August, 2009, in the mud depo-center off the Zhejiang-Fujian coast (MDZFC) in the inner shelf of East China Sea to depict the seasonal variation of the water column structure and analyze the factors responsible for the variation. The results were also used to discuss the sediment transport process and formation mechanism of the MDZFC. The water column structures varied significantly between the two surveys, with respect to the temperature, salinity, and turbidity. The summer water body, with relatively high temperatures and salinities, was evidently stratified with respect to the temperature, whereas the salinity remained constant throughout the water column. The stratification restricts sediment resuspension and transport. From the north to the south, the temperature in the middle-bottom water layer slightly increased, whereas the salinity remained mostly constant. In winter, the water body, with relatively low temperatures and salinities, was well mixed vertically. The temperature and salinity both increased from the surface to the bottom toward the east (deep water) and the south. A wedge-shaped water mass, which appears as a coastal upwelling, with relatively low temperature and high salinity in summer and relatively high temperature and high salinity in winter, spread landward along the sea floor, from the sea deeper than 50 m, whereas the extension was relatively stronger in winter. The water turbidity in winter was clearly higher than in summer. In the surface layer, the turbidity was generally greater than 5 FTU in winter and less than 1 FTU in summer. In the bottom layer, the turbidity was much greater than 200 FTU in winter and slightly greater than 50 FTU in summer. Moreover, the turbid water layer close to the sea floor in winter can reach into an area deeper than 50 m with a thickness of over 10 m; however, it was only limited to only 30-m-deep water with a thickness of 5 m in summer. The differences of marine sedimentary environment in the MDZFC were attributed to the seasonal variations of hydrodynamics environment, weather conditions, sediment supplies, and seasonal circulations. The results suggest that winter is the key season for particle transportation and deposition. The bottom turbid layer is the primarily channel of sediment transport, and the upwelling currents and the oceanic front systems play an important role in the sediment deposit processes and the formation of the MDZFC.     

Modeling Water and Salt Balance of Bol’shoe Yashaltinskoe Lake

This article is the first to give morphometric and bathymetric relationships for Bol’shoe Yashaltinskoe Lake, derived by processing expedition data. A bathymetric map of the lake is constructed. A method is proposed for modeling lake water balance and water salinity based on geographic analogy and an algorithm for constructing a stochastic vector autoregression process. Realizations of the simulated series of lake water balance components and water salinity variations over 1000 years with a monthly step are constructed.     

Toxicity of antifouling biocides to the intertidal harpacticoid copepod Tigriopus japonicus (Crustacea, Copepoda): Effects of temperature and salinity

Intertidal harpacticoid copepods are commonly used in eco-toxicity tests worldwide. They predominately live in mid-high shore rock pools and often experience a wide range of temperature and salinity fluctuation. Most eco-toxicity tests are conducted at fixed temperature and salinity and thus the influence of these environmental factors on chemical toxicity is largely unknown. This study investigated the combined effect of temperature and salinity on the acute toxicity of the copepod Tigriopus japonicus against two common biocides, copper (Cu) and tributyltin (TBT) using a 2 × 3 × 4 factorial design (i.e. two temperatures: 25 and 35 °C; three salinities: 15.0‰, 34.5‰ and 45.0‰; three levels of the biocide plus a control). Copper sulphate and tributyltin chloride were used as the test chemicals while distilled water and acetone were utilised as solvents for Cu and TBT respectively. 96h-LC50s of Cu and TBT were 1024 and 0.149 μg l⁻¹ respectively (at 25 °C; 34.5‰) and, based on these results, nominal biocide concentrations of LC0 (i.e. control), LC30, LC50 and LC70 were employed. Analysis of Covariance using ‘concentration’ as the covariate and both ‘temperature’ and ‘salinity’ as fixed factors, showed a significant interaction between temperature and salinity effects for Cu, mortality increasing with temperature but decreasing with elevated salinity. A similar result was revealed for TBT. Both temperature and salinity are, therefore, important factors affecting the results of acute eco-toxicity tests using these marine copepods. We recommend that such eco-toxicity tests should be conducted at a range of environmentally realistic temperature/salinity regimes, as this will enhance the sensitivity of the test and improve the safety margin in line with the precautionary principle.