The Durham/ESO SLODAR optical turbulence profiler

An instrument for monitoring of the vertical profile of atmospheric optical turbulence strength, employing the Slope Detection and Ranging (SLODAR) double star technique applied to a small telescope, has been developed by Durham University and the European South Observatory. The system has been deployed at the Cerro Paranal observatory in Chile for statistical characterization of the site. The instrument is configured to sample the turbulence at altitudes below 1.5 km with a vertical resolution of approximately 170 m. The system also functions as a general-purpose seeing monitor, measuring the integrated optical turbulence strength for the whole atmosphere, and hence the seeing width. We give technical details of the prototype and present data to characterize its performance. Comparisons with contemporaneous measurements from a differential image motion monitor (DIMM) and a multi-aperture scintillation sensor (MASS) are discussed. Statistical results for the optical turbulence profile at the Paranal site are presented. We find that, in the median case, 49 per cent of the total optical turbulence strength is associated with the surface layer (below 100 m), 35 per cent with the 'free atmosphere' (above 1500 m) and 16 per cent with the intermediate altitudes (100–1500 m).     

SLODAR: measuring optical turbulence altitude with a Shack–Hartmann wavefront sensor

This paper discusses the use of Shack–Hartmann wavefront sensors to determine the vertical distribution of atmospheric optical turbulence above large telescopes. It is demonstrated that the turbulence altitude profile can be recovered reliably from time-averaged spatial cross-correlations of the local wavefront slopes for Shack–Hartmann observations of binary stars. The method, which is referred to as SLODAR, is analogous to the well known SCIDAR scintillation profiling technique, and a calibration against contemporaneous SCIDAR observations is shown. Hardware requirements are simplified relative to the scintillation method, and the number of suitable target objects is larger. The implementation of a Shack–Hartmann based turbulence monitor for use at the William Herschel Telescope is described. The system will be used to optimize adaptive optical observations at the telescope and to characterize anisoplanatic variations of the corrected point spread function.     

Model of optical turbulence profile at Cerro Pachón

New measurements of optical turbulence profile at the Cerro Pachón observatory in Chile are analysed jointly with previously published data to model the variations of the intensity and thickness of the ground layer and free atmosphere under a variety of observing conditions. This work is motivated by the need to predict statistically the performance of ground-layer adaptice optics. We find that the ground-layer profile can be represented by a decaying exponent with a scale height of 20–40 m, increasing to 100 m under bad conditions. The zone from 6 to 500 m contributes typically about 61 per cent to the total integral, the latter causing a median seeing of 0.77 arcsec. Turbulence integrals in the ground layer and in free atmosphere vary independently of each other, in 50 per cent of cases they deviate by less than 1.8 times from their respective median values. The existence of periods with low turbulence in the free atmosphere and their importance for adaptive optics is stressed.     

LOLAS: an optical turbulence profiler in the atmospheric boundary layer with extreme altitude resolution

We report the development and first results of an instrument called Low Layer SCIDAR (Scintillation Detection and Ranging) (LOLAS) which is aimed at the measurement of optical-turbulence profiles in the atmospheric boundary layer with high altitude resolution. The method is based on the Generalized SCIDAR (GS) concept, but unlike the GS instruments which need a 1-m or larger telescope, LOLAS is implemented on a dedicated 40-cm telescope, making it an independent instrument. The system is designed for widely separated double-star targets, which enables the high altitude resolution. Using a 200-arcsec-separation double star, we have obtained turbulence profiles with unprecedented 12-m resolution. The system incorporates necessary novel algorithms for autoguiding, autofocus and image stabilization. The results presented here were obtained at Mauna Kea Observatory. They show LOLAS capabilities but cannot be considered as representative of the site. A forthcoming paper will be devoted to the site characterization. The instrument was built as part of the Ground Layer Turbulence Monitoring Campaign on Mauna Kea for Gemini Observatory.     

Adaptive optics parameters connection to wind speed at the Teide Observatory

Current projects for large telescopes demand a proper knowledge of atmospheric turbulence to design efficient adaptive optics systems in order to reach large Strehl ratios. However, the proper characterization of the turbulence above a particular site requires long-term monitoring. Because of the lack of long-term information on turbulence, high-altitude winds (in particular winds at the 200 mbar pressure level) were proposed as a parameter for estimating the total turbulence at a particular site, with the advantage of records of winds going back several decades. We present the first complete study of atmospheric adaptive optics parameters above the Teide Observatory (Canary Islands, Spain) in relation to wind speed. On-site measurements of   C ² _N ( h )  profiles (more than 20 200 turbulence profiles) from G-SCIDAR (Generalized Scintillation Detection and Ranging) observations and wind vertical profiles from balloons have been used to calculate the seeing, the isoplanatic angle and the coherence time. The connection of these parameters to wind speeds at ground and at 200 mbar pressure level are shown and discussed. Our results confirm the well-known high quality of the Canary Islands astronomical observatories.     

Mauna Kea ground-layer characterization campaign

We present the results of an 18-month study to characterize the optical turbulence in the boundary layer and in the free atmosphere above the summit of Mauna Kea in Hawaii. This survey combined the Slope-Detection and Ranging (SLODAR) and Low-Layer SCIntillation Detection And Ranging (SCIDAR) (LOLAS) instruments into a single manually operated instrument capable of measuring the integrated seeing and the optical turbulence profile within the first kilometre with spatial and temporal resolutions of 40–80 m and 1 min (SLODAR) or 10–20 m and 5 min (LOLAS). The campaign began in the fall of 2006 and observed for roughly 50–60 h per month. The optical turbulence within the boundary layer is found to be confined within an extremely thin layer (≤80 m), and the optical turbulence arising within the region from 80 to 650 m is normally very weak. Exponential fits to the SLODAR profiles give an upper limit on the exponential scaleheight of between 25 and 40 m. The thickness of this layer shows a dependence on the turbulence strength near the ground, and under median conditions the scaleheight is <28 m. The LOLAS profiles show a multiplicity of layers very close to the ground but all within the first 40 m. The free-atmosphere seeing measured by the SLODAR is 0.42 arcsec (median) at 0.5 μm and is, importantly, significantly better than the typical delivered image quality at the larger telescopes on the mountain. This suggests that the current suite of telescopes on Mauna Kea is largely dominated by a very local seeing either from internal seeing, seeing induced by the flow in/around the enclosures, or from an atmospheric layer very close to the ground. The results from our campaign suggest that ground-layer adaptive optics can be very effective in correcting this turbulence and, in principle, can provide very large corrected fields of view on Mauna Kea.     

Measurements of atmospheric turbulence parameters at Vainu Bappu Observatory using short-exposure CCD images

We report atmospheric turbulence parameters, namely atmospheric seeing, tilt-anisoplanatic angle(θ_0) and coherence time(Τ_0), measured under various sky conditions, at Vainu Bappu Observatory in Kavalur. Bursts of short exposure images of selected stars were recorded with a high-speed, frame-transfer CCD mounted on the Cassegrain focus of a newly commissioned 1.3 m telescope. The estimated median seeing is ≈ 1.85 " at wavelength of ～ 600 nm, the image motion correlation between different pairs of stars is ～44% for θ0≈ 36" and mean Τ_0 is ≈ 2.4 ms. This work was motivated by the design considerations and expected performance of an adaptive optics system that is currently being planned for the telescope.     

Phasing of segmented mirrors: a new algorithm for piston detection

The point spread function of a segmented-mirror telescope is severely affected by segment misalignment, which can nullify the performance of adaptive optics systems. The piston and tilt of each segment must be precisely adjusted in relation to the other segments. Furthermore, the direct detection of the alignment error with natural stars would be desirable in order to monitor the errors during astronomical observation.
We have studied the lost information of the piston error caused by the presence of atmospheric turbulence in the measurements of curvature, and present a new algorithm for obtaining the local piston using the curvature sensor. A phase-wrapping effect is shown as responsible for the loss of curvature information and so the piston errors can no longer adequately be mapped; this happens not only in the presence of atmospheric turbulence, but also in its absence.
Good results are obtained using a new iterative method for obtaining the local piston error map. In the presence of atmospheric perturbation, the turbulent phase information obtained from a Shack–Hartmann sensor is introduced in our new iterative method. We propose a hybrid sensor composed of a curvature sensor and a Shack–Hartmann sensor, in order to complete all the information for the phasing. This design takes a short computation time and could be used in real time inside an adaptive optics system, where tilt and piston errors must be corrected.     

Laser guide stars for extremely large telescopes: efficient Shack–Hartmann wavefront sensor design using the weighted centre-of-gravity algorithm

Over the last few years increasing consideration has been given to the study of laser guide stars (LGS) for the measurement of the disturbance introduced by the atmosphere in optical and near-infrared (near-IR) astronomical observations from the ground. A possible method for the generation of a LGS is the excitation of the sodium layer in the upper atmosphere at approximately 90 km of altitude. Since the sodium layer is approximately 10 km thick, the artificial reference source looks elongated, especially when observed from the edge of a large aperture. The spot elongation strongly limits the performance of the most common wavefront sensors. The centroiding accuracy in a Shack–Hartmann wavefront sensor, for instance, decreases proportionally to the elongation (in a photon noise dominated regime). To compensate for this effect, a straightforward solution is to increase the laser power, i.e. to increase the number of detected photons per subaperture. The scope of the work presented in this paper is twofold: an analysis of the performance of the weighted centre of gravity algorithm for centroiding with elongated spots and the determination of the required number of photons to achieve a certain average wavefront error over the telescope aperture.     

Improvements on the optical differentiation wavefront sensor

We describe a novel concept for high-resolution wavefront sensing based on the optical differentiation wavefront sensor (OD). It keeps the advantages of high resolution, adjustable dynamic range, ability to work with polychromatic sources and, in addition, it achieves good performance in wavefront reconstruction when the field is perturbed by scintillation. Moreover, this new concept can be used as multi-object wavefront sensor in multiconjugate adaptive optics systems. It is able to provide high resolution and high sampling operation, which is of great interest for the projected extreme adaptive optics systems for large telescopes.