Structural analyses of the crystalline rocks between Dirang and Tawang,West Kameng district,Arunachal Himalaya

In Kameng Valley of Arunachal Pradesh, the crystalline rocks of Se La Group of Higher Himalaya are thrust over the Lesser Himalayan rocks of Dirang Formation, Bomdila Group along the Main Central Thrust and exhibit well preserved structures on macro- to microscopic scales. Detailed analysis of structures reveals that the rocks of the area have suffered four phases of deformation D₁, D₂, D₃ and D₄. These structures have been grouped into (i) early structures (ii) structures related to progressive ductile thrusting and (iii) late structures. The early structures which developed before thrusting formed during D₁ and D₂ phases of deformation, synchronous to F₁ and F₂ phases of folding respectively. The structures related to progressive ductile shearing developed during D₃ phase of deformation, when the emplacement of the crystalline rocks took place over the rocks of Dirang Formation along the Main Central Thrust. Different asymmetric structures/kinematic indicators developed during this ductile/brittle-ductile regime suggest top-to-SSW sense of movement of the crystalline rocks of the area. D₄ is attributed to brittle deformation. Based on satellite data two new thrusts, i.e. Tawang and Se La thrusts have been identified parallel to Main Central Thrust, which are suggestive of imbricate thrusting. Strain analysis from the quartz grains of the gneissic rocks reveals constriction type of strain ellipsoid where k value is higher near the MCT, gradually decreases towards the north. Further, the dynamic analysis carried out on the mesoscopic ductile and brittle-ductile shear zones suggest a NNE-SSW horizontal compression corresponding to the direction of northward movement of Indian Plate.     

Mineralogy and geochemistry of biotites from Proterozoic granitoids of western Arunachal Himalaya: Evidence of bimodal granitogeny and tectonic affinity

Felsic magmatic rocks in Kameng corridor of western Arunachal Himalaya are represented by extensively exposed Palaeoproterozoic porphyritic muscovite-biotite granite (GGn) of the Bomdila Group and small stock-like Mesoproterozoic hornblende-biotite granite (HBG) of the Salari Group. Mineralogy and chemical composition of biotites from GGn and HBG have been utilized to understand the nature and tectonic environment of their parental felsic melts. Biotites in GGn (FeO^t/MgO=3.1–4.6) are Fe-biotites and have shown affinity with primary biotites co-precipitating with muscovite in a peraluminous (S-type) felsic melt of syn-collisional tectonic environment. Biotites in HBG (FeO^t/MgO=1.3–2.2) are transitional between Fe and Mg biotites evolved from Fayalite-Magnetite-Quartz (FMQ) to Nickel-Nickel Oxide (NNO) buffers and are related to primary biotites co-existing with amphibole and other ferromagnesian minerals in a calc-alkaline metaluminous (I-type) felsic melt mostly formed in a subduction setting. Both GGn and HBG biotites exhibit Mg⇌Fe substitution, which is more pronounced in HBG biotites. GGn biotites exhibit 2Al⇌3Fe²⁺ substitution as expected in peraluminous melt, whereas 3Mg⇌2Al substitution normally expected to operate in metaluminous melt is less pronounced in HBG biotites. GGn biotites are markedly enriched in siderophyllite, and depleted in phlogopite components as compared to HBG biotites, which point to diverse genetic conditions. HBG biotites indicate oxidizing environment of the felsic melt unlike the reducing nature of the porphyritic granite (GGn).     

Geochemistry and petrogenesis of granitoids of Lesser Himalayan crystallines,Western Arunachal Himalaya

Low to medium grade crystalline rocks locally known as Bomdila Group extensively covers the Lesser Himalayan region in Western Arunachal Himalaya. This Group consists dominantly of mylonitic gneisses of granitic composition of Palaeoproterozoic age, named as Bomdila mylonitic gneiss (BMG) and a small body of hornblende bearing granite of Mesoproterozoic age known as Salari granite (SG). The BMG is affinity to peraluminous (A/CNK > 1.1) with high content of SiO₂, K₂O/Na₂O ratio, normative corundum, high ratio of FeO^t/MgO in biotite (3.21–5.11) that shows characteristics of S-type granite whereas SG has granodiorite composition with high Na₂O, low K₂O, presence of hornblende, normative diopside, low A/CNK ratio (<1.1) and low FeO^t/MgO ratio in biotite (1.58–1.60) indicates metaluminous I-type granite affinity. The SG has more fractionated nature of REE [(Ce/Yb)_N = 9.06–18.53] and minor negative Eu anomalies [Eu_N/Eu* = 0.69–0.94] as compared to BMG which has less fractionation of REE [(Ce/Yb)_N = 5.95–9.16] and strong negative Eu anomalies [Eu_N/Eu* = 0.37–0.43]. Geochemical and petrological studies suggest that the SG and BMG are not genetically related; SG appears to have derived from igneous source whereas the BMG have been derived from sedimentary source, however these granitoids might have produced during the same thermal event.     

Petrology of a non-classical Barrovian inverted metamorphic sequence from the western Arunachal Himalaya, India

In this study, we reconstruct the inverted metamorphic sequence in the western Arunachal Himalaya using combined structural and metamorphic analyses of rocks of the Lesser and Greater Himalayan Sequences. Four thrust-bounded stratigraphic units, which from the lower to higher structural heights are (a) the Gondwana rocks and relatively weakly deformed metasediments of the Bomdila Group, (b) the tectonically interleaved sequence of Bomdila gneiss and Bomdila Group, (c) the Dirang Formation and (d) the Se La Group are exposed along the transect, Jira–Rupa–Bomdila–Dirang–Se La Pass. The Main Central thrust, which coincides with intense strain localization and the first appearance of kyanite-grade partial melt is placed at the base of the Se La Group.Five metamorphic zones from garnet through kyanite, kyanite migmatite, kyanite-sillimanite migmatite to K-feldspar-kyanite-sillimanite migmatites are sequentially developed in the metamorphosed low-alumina pelites of Dirang and Se La Group, with increasing structural heights. Three phases of deformation, D₁–D₂–D₃ and two groups of planar structures, S₁ and S₂ are recognized, and S₂ is the most pervasive one. Mineral growths in all these zones are dominantly late-to post-D₂, excepting in some garnet-zone rocks, where syn-D₁ garnet growths are documented. Metamorphic isograds, which are aligned parallel to S₂ were subsequently folded during D₃. The deformation produced plane-non-cylindrical fold along NW–SE axis.In the garnet-zone, peak metamorphism is marked by garnet growth through the reaction biotite + plagioclase → garnet + muscovite. An even earlier phase of syn-D₁ garnet growth occurred in the chlorite stability field with or without epidote. In the kyanite-zone metapelites, kyanite appeared via the pressure-sensitive reaction, garnet + muscovite → kyanite + biotite + quartz. Staurolite was produced in the same rock by retrograde replacement of kyanite following the reaction, garnet + kyanite + H₂O → staurolite + quartz. These reactions depart from the classical kyanite- and staurolite-isograd reactions in low-alumina pelites, encountered in other segments of eastern Himalaya. In the metapelites, just above the kyanite-zone, melting begins in the kyanite field, through water-saturated and water-undersaturated melting of paragonite component in white mica. Leucosomes formed through these reactions are characteristically free of K-feldspar, with sodic plagioclase and quartz as the dominant constituents. With increasing structural height, the melting shifts to water-undersaturated melting of muscovite component of white mica, producing an early K-feldspar + kyanite and later K-feldspar + sillimanite assemblages and granitic leucosomes.Applications of conventional geothermobarometry and average P–T method reveal near isobaric (at P  8 kbar) increase in peak metamorphic temperatures from 550 °C in the garnet-zone to >700 °C for K-feldspar-kyanite-sillimanite-zone rocks. The findings of near isobaric metamorphic field gradient and by the reconstruction of the reaction history, reveal that the described inverted metamorphic sequence in the western Arunachal Himalaya, deviates from the classical Barrovian-type metamorphism. The tectonic implication of such a metamorphic evolution is discussed.     

扬子西缘瓦斯沟花岗岩的元素-Nd同位素地球化学——岩石成因与构造意义

对扬子地块西缘康滇裂谷北段的瓦斯沟花岗质杂岩进行了系统的岩石学、元素-Nd同位素地球化学研究,结果表明该岩体为I型花岗岩,是由前存年轻(中元古代末-新元古代初)岛弧地壳物质部分熔融形成的.早期的花岗岩形成于扬子地块西缘由会聚挤压向陆内伸展的转折环境,晚期的花岗闪长岩形成于板内环境,很可能与新元古代地幔柱事件有关.它们显示的"岛弧地球化学特征"是继承了源岩地球化学特征的结果,不代表其形成时的构造环境.     

Neotectonic study along mountain front of northeast Himalaya,Arunachal Pradesh,India

To study neotectonics, the structural and morphotectonic aspects are studied along a part of mountain front region of Northeast Himalaya, Arunachal Pradesh, India. Unpaired river terraces are recognized near north of transverse Burai River exit, which is cut by an oblique fault. Across this fault, fluvial terraces are located at heights of 22.7 and 3 m, respectively, on the left and right banks. A water gap is formed along the river channel where the uplifted Middle Siwalik sandstone beds dipping 43° towards ENE direction, thrust over the Quaternary deposit consisting of boulders, cobbles, pebbles and sandy matrix. This river channel incised the bedrock across the intraformational Ramghat Thrust along which the rocks of the Middle Siwalik Formation thrust over the Upper Siwalik Formation. Recent reactivated fault activity is suggested north of the Himalayan Frontal Thrust that forms the youngest deforming front of the Himalaya. The uplifting along the stream channel is noticed extended for a distance of ~130 m and as a result the alluvial river channel became a bedrock river. The relative displacement of rocks is variable along the length of strike–slip faults developed later within the Ramghat Thrust zone. Longitudinal and Channel gradient profiles of Burai River exhibit knick points and increase in river gradient along the tapering ends of the profiles. The study suggests active out-of-sequence neotectonically active thrusting along the mountain front. Neotectonics combined with climatic factor during the Holocene times presents a virgin landscape environment for studying tectonic geomorphology.     

西藏冈底斯带门巴地区印支期花岗岩地球化学特征及其构造意义

门巴地区晚三叠世花岗岩主要出露在西藏冈底斯构造带的弧背断隆上,主要岩石类型为黑云角闪花岗闪长岩和黑云二长花岗岩。岩石为钙碱性,具有富SiO2、K2O的特点。K2O/Na2O平均为1.13,相对富钾。Al2O3变化于13.27%～15.53%之间,A/CNK平均为1.0,为准铝质岩石。花岗岩体稀土元素总量∑REE变化于99.5×10-6～294.72×10-6之间,轻稀土元素富集,重稀土元素亏损,具弱至中等的负Eu异常。微量元素以富K、Rb、Ba、Th等大离子亲石元素和亏损Nb、Ta、Y、Yb等高场强元素为特征。岩石学和岩石地球化学研究表明,该时代的花岗岩具I型花岗岩的特点,形成于岛弧环境,是新特提斯洋早期俯冲作用的产物。同时它也暗示着冈底斯岩浆弧带在晚三叠世就已成雏形。     

Geochemistry and petrogenetic evolution of the diatexites of Central Kerala,India

The hornblende-biotite gneisses of Central Kerala which cover approximately 490km² exhibit schlieric and nebulitic structures, tending towards a homophanous nature and are classified here as diatexites. Mafic protoliths and restite biotite, each representing the refractory residuum of two independent partial melting episodes are widely present in the gneisses. The general mineral assemblage of the gneisses comprise quartz, K-feldspar, oligoclase, biotite and hornblende. Chemically, they are dominantly adamellitic and the behaviour of major and trace elements is consistent with a magmatic parentage. Based on petrochemical criteria, a two-stage evolution model is proposed here, which involves (i) partial melting of mafic granulites under high Archean geothermal gradients and generation of tonalite/trondhjemite through amphibole and plagioclase fractionation and (ii) partial melting and subsequent quartz-alkali feldspar fractionation of the tonalite/trondhjemite under amphibolite facies conditions with synchronous K-enrichment resulting in the diatectic adamellites.     

Geochemistry of biotites and host granitoid plutons from the Proterozoic Mahakoshal Belt,central India tectonic zone: implication for nature and tectonic setting of magmatism

The northern part of the central India tectonic zone (CITZ) is occupied by the Proterozoic Mahakoshal Belt, which is mainly comprised of granitoids and volcano-sedimentary lithounits. The granitoids (ca. 1880–1710 Ma) are exposed as small circular to elliptical-shaped, stock-like intrusive bodies, such as Nerueadamar granitoids (NG), Tumiya granitoids (TG), Jhirgadandi granitoids (JG), Dudhi granite gneiss (DG), Raspahari granitoids (RG), Katoli granitoids (KG), and Harnakachar granitoids (HG), collectively forming the granite gneissic complex (GGC). The geochemistry of biotites, host granitoids, and enclaves from these plutons has been investigated in order to understand the redox condition and likely tectonic affinity of host granitoids. The Al₂O₃–MgO–FeO^t contents and operated elemental substitution in biotites strongly suggest the diverse nature of host magmas such as calc-alkaline, metaluminous (I-type), peraluminous (S-type), and transitional between I- and S-types, which appear to have formed in subduction zone and syn-collisional tectonic settings. The transitional (I-S)-type granitoids inferred based on biotite compositions, however, represent both metaluminous (HG) and peraluminous (DG and KG) granitoids in terms of whole-rock molar A/CNK (Al₂O₃/CaO + Na₂O + K₂O) ratios. Ages of granitoid magmatism and its field association with contemporaneous volcano-sedimentary lithounits clearly mark the post-collisional tectonic setting, which contradicts the subduction-related tectonic setting inferred from biotites of JG and microgranular enclave (JE) hosted in JG. Whole-rock major and trace elements broadly suggest the existence of collision tectonics during the formation of granitoid plutons. The JG, KG, and DG contain a bt-Kf-mag-qtz assemblage, and their parental magmas evolved under moderate oxidizing environments (?O₂ = ?12.03 to ?13.27 bars). On the other hand, RG (bt-gt-Kf-pl-qtz), NG (bt-ms-Kf-pl-qtz), and TG (bt-ms-Kf-pl-qtz) represent pure crustal-derived magmas evolved in strongly reducing conditions formed under a syn-collisional tectonic setting as evident from their mineral assemblages and biotite and whole-rock compositions. Granitoid plutons of the Mahakoshal Belt were most likely formed during amalgamation of the Columbian supercontinent.     

Geochemistry and Petrogenesis of the Proterozoic Bandal Mafic Rocks,Himachal Pradesh,NW Himalaya

The Proterozoic Bandal mafic rocks, exposed in Kullu-Rampur window, Lesser Himalaya, Himachal Pradesh, indicate two distinct (high-Ti and low-Ti) magma types. The high-Ti basalts are characterised by high-TiO₂ (> 2 wt%), Ti/Y, Ti/Zr, TiO₂/K₂O and low Rb/Sr ratios. They are enriched in high field strength (HFS) elements (Nb, Zr, Ti) relative to low field strength (LFS) incompatible elements (K, Rb). The low-Ti basalts are charactersied by low TiO₂ (< 2 wt%), Ti/Y, Ti/Zr and high Rb/Sr and Rb/Ba ratios. Quartz-normative composition, continental tholeiite characteristics with Nb/La less than 1 are some of the common factors of the two groups of the Bandal mafic rocks. The trace element concentrations and their ratios of the two groups of the basalts indicate that they have been derived from the asthenosphere at different depths, low-Ti at shallow and high-Ti at deeper levels. Some of the chemical features like low Mg #, Cr, Ni, high incompatible element concentrations (especially Ba), light rare earth element (LREE) enriched patterns point towards assimilation and fractional crystallisation (AFC) process which may have played a significant role in the generation of these basalts.Furthermore, the Bandal mafic rocks, apart from field settings, are geochemically similar to other Proterozoic mafic bodies like the Rampur volcanics, Mandi-Darla volcanics, Garhwal volcanics and Bhimtal-Bhowlai volcanics of the Lesser Himalaya. This widespread Proterozoic continental tholeiitic magmatism over an area of 170,000 km² in the Lesser Himalaya provides an evidence of plume activity in the region.     

Geochemistry of Renuka Lake and wetland sediments,Lesser Himalaya (India): implications for source-area weathering,provenance, and tectonic setting

The geochemical investigation of sediments deposited in the Renuka Lake basin and its adjoining wetland has shown variation in the distribution and concentration of major, trace and REEs. The major elements are depleted in the lake in relation to wetland and that of Post Archaean Australian, Shale (PAAS), except for CaO which is strikingly in excess and has a dilution effect on SiO₂ and other oxides and trace elements. The Wetland sediments, on the other hand, are enriched in Al₂O₃, Fe₂O₃, K₂O and TiO₂ and the latter three show a positive correlation with Al₂O₃ in both wetland and lake sediments suggesting their association with phyllosilicates and similar source rocks. The enrichment of Y, Zr, Ni, Th, U and Nb in wetland compared to lake and their similarity with PAAS in the former, suggests more clay fractions in the wetland. A high Zr/Hf ratio in wetland and lake sediments and a positive correlation of Zr with Y and HREE indicate Zr control on HREEs. However, higher Zr/Yb and Zr/Th ratios in wetland compared to lake indicate mineral sorting during the process of lighter particles (clays) being trapped in wetland soil. This is also reflected from negative correlation of Gd_N/Yb_N with Al₂O₃ and a strong positive correlation with SiO₂ in wetland sediments. The wetland in this context has a control on lake sediment chemistry. The chondrite normalized REE patterns are essentially the same for lake as well as wetland sediments but abundance decreases in the former. The similarity of pattern with that of PAAS and negative Eu anomaly indicates a cratonic source of sediments. In a plot of the individual samples, wetland samples cluster while lake samples are separated indicating fractionation of lake sediments. A strong positive correlation of La_N/Yb_N with Al₂O₃ and a positive correlation of Zr-∑LREE and Zr-La_N/Yb_N suggest that LREEs are controlled by both phyllosilicates and zircon. The chemical index of alteration (CIA) indices in lake sediments and in wetland are higher than PAAS indicating moderate chemical weathering in the source area. The petrography, lack of felsic magmatic rock fragments, and negative correlation between Zr-(Gd/Yb)_C indicate sedimentary source rocks for the detritus. This is in conformity with the Lesser Himalayan sedimentary sequence belonging to neo-Proterozoic–Proterozoic age and constituting lake catchment of Renuka. The tectonic delineation and discriminant function plots of lake and wetland sediments indicate their cratonic and/or quartzose sedimentary orogenic terrain source that has been deposited in a passive margin setting.     

Geochemistry and petrogenesis of Neoproterozoic Mylliem granitoids,Meghalaya Plateau,northeastern India

The Mylliem granitoids of the Meghalaya Plateau, northeastern India, represent one of the disharmonic Neoproterozoic igneous plutons, which are intrusive into low-grade Shillong Group of metasediments. Field studies indicate that the Mylliem granitoids cover an area of about 40 km² and is characterized by development of variable attitude of primary foliations mostly marked along the margin of the pluton. Xenoliths of both Shillong Group of metasediments and mafic rocks have been found to occur within Mylliem granitoids. Structural study of the primary foliation is suggestive of funnel-shaped intrusion of Mylliem granitoids with no appreciable evidence of shearing. Petrographically, Mylliem granitoids are characterized by pink to white phenocrysts of prismatic microcline/perthite and lath-shaped plagioclase (An₂₀–An₂₉). Groundmass material is characterized by quartz, microcline, plagioclase, muscovite and biotite. Sphene and apatite occur as accessory minerals. Petrographically Mylliem granitoids have been discriminated as granite and granodiorite according to IUGS system of classification.     

Geochemistry and petrogenesis of the Palampur metavolcanics, Lesser Himachal Himalaya, India

Summary The Palampur metavolcanics (PV) in the northwest Himalaya are part of the Late Archaean (2.5 Ga) Rampur flood basalt province (RFBP) which represents one of the oldest manifestation of worldwide mafic magmatism. The volcanics occur as mafic lava flows with evidence of two phases of deformation. The first phase resulted in recrystallisation which almost completely obliterated the primary mineralogy, and the second phase was of weak cataclasis. Immobile trace element ratios as well as cation percent Al - (Fe - Ti) - Mg indicate that the volcanics are tholeiitic in composition. The chemical characteristics, such as the decoupling between HFS and LIL elements i.e., distinct negative Sr, Nb and Ti anomalies in the double normalisation ratios spiderdiagram together with low Ti/Y and Zr/Y ratios, testify the rocks as low-Ti continental flood basalts. The chemical variations in the volcanics can be related to varying extents of partial melting of the mantle source(s), followed by fractional crystallisation (predominantly olivine and clinopyroxene over plagioclase). Positive correlation between LREE and Fe abundances, Ce-Nd and Y/Nd-Zr/Y data preclude any significant role of crustal contamination in the evolution of their bulk chemistry. The REE data and [Mg]-[Fe] relations rather suggest that the parental magma of the PV derived from non-pyrolitic source(s) which was heterogeneous with respect to enrichment in Zr, LREE and Fe/Mg ratios. Mantle metasomatism appears to be the main process of such source enrichment, possibly caused by the addition of a volatilerich silicate melt phase.[/ p]

---

Geochemie und Petrogenese der Palampur Metavulkanite, Lesser Himachal Himalaya, Indien

Zusammenfassung Die Palampur Metavulkanite (PV), im nordwestlichen Himalaya, gehören zur spätarchaiischen (2.5 Ga) Rampur Plateau-Basalt-Provinz (RFBP), die einen der ältesten, weltweiten Phasen von mafischem Magmatismus manifestiert. Die Vulkanite treten als mafische Lavaströme auf und zeigen zwei Phasen von Deformation. Die erste resultierte in einer Rekristallisation, die nahezu den gesamten primären Mineralbestand überprägt hat. Die zweite Phase ist durch schwache Kataklase repräsentiert. Immobile Spurenelementverhältnisse, wie auch die Kationenprozent von Al- (Fe- (-Ti) -Mg, deuten eine tholeiitische Zusammensetzung der Vulkanite an. Die chemischen Charakteristika, die im unterschiedlichen Verhalten der HFS und LIL Elemente deutlich werden, deutlich negative Sr, Nb und Ti Anomalien in den zweifach normalisierten Spiderdiagrammen, niedrige Ti/Y und Zr/Y Verhältnisse, bezeugen, dass es sich um Ti-arme, kontinentale Plateaubasalte handelt. Die chemischen Unterschiede innerhalb der Vulkanite können auf unterschiedliche Grade von Aufschmelzung des (der) Mantelmaterials(e), gefolgt von fraktionierter Kristallisation (vor allem Olivin und Klinopyroxen, untergeordnet Plagioklas), zurückgeführt werden. Positive Korrelation der LREE mit Fe, wie auch die Ce-Nd und Y/Nd-Zr/Y Daten schließen eine signifikante Rolle von Krustenkontamination in der Evolution der Gesteinschemie aus. Die REE Daten und die /Mg/-/Fe/ Verhältnisse lassen eher vermuten, dass das Ausgangsmagma der PV von einem nicht-pyrolitischen Material stammt, welches bezüglich Anreicherung an Zr, LREE und Fe/Mg Verhältnis heterogen gewesen ist. Mantelmetasomatose scheint der Hauptprozeß für diese Anreicherng des Ausgangsmaterials gewesen zu sein, die möglicherweise durch Zufuhr einer silikatischen Schmelzphase, reich an flüchtigen Bestandteilen, hervorgerufen wurde.[/ p]

     

Geochemistry of Paleozoic ignimbrites in central Kazakhstan and their petrogenetic significance

Ignimbrites in the Devonian and Late Paleozoic volcanic belts in central Kazakhstan were produced in various geotectonic environments and are diverse in composition. The bulk composition of the Devonian ignimbrites is rhyolitic. The Eifelian rocks of the Chingiz island-arc system belong to the calc-alkaline series and are enriched in Zr, Nb, Y, and REE (predominantly LREE). The Frasnian ignimbrites that were formed in unusual island arcs of the Mediterranean type are ultrapotassic. Compared to the Eifelian ignimbrites, they bear lower concentrations of Zr, Nb, Y, and REE but are richer in Rb and Ba. Both rock varieties show clearly pronounced Eu minima and Ce anomalies. The Carboniferous and Permian ignimbrites were generated within a volcanic belt in a continental margin. The Carboniferous ignimbrites are mostly of dacite-rhyolite and sometimes of dacitic andesite composition. Compared to the Devonian ignimbrites, they are depleted in Zr, Nb, and Y at higher concentrations of Ba and low REE sums, which are notably dominated by LREE; their Eu minima are small, and they have no Ce anomalies. The Permian ignimbrites are predominantly of rhyolite composition. The Early Permian rocks have REE sums close to those in the Carboniferous rocks, but the former have clearly pronounced Eu minima and Ce anomalies. The Late Permian ignimbrites have total REE concentrations close to those in the Devonian ignimbrites, but the former are strongly enriched in LREE and have prominent Eu minima and Ce anomalies. The major-and trace-element composition of fiamme in all ignimbrite varieties varies depending on the relative age of the fiamme. The REE patterns of the fiamme differ from massif to massif, but their systematic changes from older to younger fiamme are similar. Along with the identity of the isotopic characteristics of whole-rock ignimbrite samples and fiamme of different ages in them, this testifies that the ignimbrites were formed not via the mixing of various melts but by the systematic evolution of a parental melts, which were different for different massifs.     

Occurrence of faunal coal balls in Gondwana sediments (Permian) of Arunachal Himalaya,India

The nature and genesis of fossiliferous inorganic concretions present within the coal and carbonaceous beds of Garu Formation, Arunachal Pradesh have been studied in detail. These concretionary bodies are described here as “coal balls” due to their close similarity with the true coal balls reported from European and American coals. Further, the presence of coal balls in this area also indicates that the sediments of the Garu Formation were deposited in shallow marginal swamps subjected to marine incursions during the Lower Permian.     

Thermal metamorphism of the Arunachal Himalaya, India: Raman thermometry and thermochronological constraints on the tectono-thermal evolution

Determination of the peak thermal condition is vital in order to understand tectono-thermal evolution of the Himalayan belt. The Lesser Himalayan Sequence (LHS) in the Western Arunachal Pradesh, being rich in carbonaceous material (CM), facilitates the determination of peak metamorphic temperature based on Raman spectroscopy of carbonaceous material (RSCM). In this study, we have used RSCM method of Beyssac et al. (J Metamorph Geol 20:859–871, 2002a) and Rahl et al. (Earth Planet Sci Lett 240:339–354, 2005) to estimate the thermal history of LHS and Siwalik foreland from the western Arunachal Pradesh. The study indicates that the temperature of 700–800 °C in the Greater Himalayan Sequence (GHS) decreases to 650–700 °C in the main central thrust zone (MCTZ) and decreases further to <200 °C in the Mio-Pliocene sequence of Siwaliks. The work demonstrates greater reliability of Rahl et al.’s (Earth Planet Sci Lett 240:339–354, 2005) RSCM method for temperatures >600 and <340 °C. We show that the higher and lower zones of Bomdila Gneiss (BG) experienced temperature of ~600 °C and exhumed at different stages along the Bomdila Thrust (BT) and Upper Main Boundary Thrust (U.MBT). Pyrolysis analysis of the CM together with the Fission Track ages from upper Siwaliks corroborates the RSCM thermometry estimate of ~240 °C. The results indicate that the Permian sequence north of Lower MBT was deposited at greater depths (>12 km) than the upper Siwalik sediments to its south at depths <8 km before they were exhumed. The ⁴⁰Ar/³⁹Ar ages suggest that the upper zones of Se La evolved ~13–15 Ma. The middle zone exhumed at ~11 Ma and lower zone close to ~8 Ma indicating erosional unroofing of the MCT sheet. The footwall of MCTZ cooled between 6 and 8 Ma. Analyses of P–T path imply that LHS between MCT and U.MBT zone falls within the kyanite stability field with near isobaric condition. At higher structural level, the temperatures increase gradually with P–T conditions in the sillimanite stability field. The near isothermal (700–800 °C) condition in the GHS, isobaric condition in the MCTZ together with T–t path evidence of GHS that experienced relatively longer duration of near peak temperatures and rapid cooling towards MCTZ, compares the evolution of GHS and inverted metamorphic gradient closely to channel flow predictions.