共查询到20条相似文献,搜索用时 15 毫秒
1.
H.M. Badr 《Ocean Engineering》1994,21(1)
The problem of oscillating inviscid flow over an elliptic cylinder is studied for various angles of attack. The flow is incompressible and two-dimensional and the oscillations are harmonic. The flow direction is always normal to the cylinder axis and oscillations are only allowed in the magnitude of the free stream velocity. The study focuses on the hydrodynamic forces acting on the cylinder as well as the surface pressure distribution and their time variation. The parameters involved are the cylinder axis ratio, the angle of attack and the Strouhal number. The variables are normalized in such a way that the solutions for the problems of oscillating flow over flat plates and circular cylinders can be easily obtained as special cases. Analytical expressions are given for the drag coefficient, the lift coefficient, and the surface pressure distribution and their variation with time. Similar analytical expressions are given for the special cases of circular cylinders and inclined flat plates in oscillating inviscid flows. 相似文献
2.
The hydrodynamic forces acting on an oblate spheroid placed in an oscillating free stream are obtained for the special case of inviscid flow. The flow is assumed incompressible and axisymmetric and the free stream oscillations are harmonic. The flow direction is always along the spheroid's axis of symmetry. Analytical expressions are obtained for the potential and stream functions as well as the surface pressure distribution and the hydrodynamic force coefficient. The analysis is based on the solution of the unsteady equations of motion and continuity in oblate spheroidal coordinate system. The parameters involved are the major to minor axes ratio and the Strouhal number. The solutions for the two limiting cases of oscillating flows over disks and spheres can be easily obtained from the presented analytical solution. 相似文献
3.
The problem of unsteady, laminar flow past a circular cylinder which starts translating and oscillating impulsively from rest in a viscous fluid is numerically investigated at a Reynolds number of R = 103. The flow is incompressible and two-dimensional, and the cylinder oscillations are harmonic. The transverse oscillations are only allowed when the maximum oscillatory-to-translational velocity ratio is 0.5. The investigation is based on an implicit finite difference scheme for integrating the unsteady Navier-Stokes equations together with the mass-conservation equation in their vorticity stream function formulation. A non-inertial coordinate transformation is used so that the grid mesh remains fixed relative to the accelerating cylinder. Present calculations are performed within the range of sufficiently large oscillation amplitude to induce separation. The time variation of the in-line and transverse force coefficients are presented. The study also focuses on the laminar asymmetric flow structure in the near-wake region. In this flow regime, it is found that there is alternate shedding of vortices from either side of the cylinder over an oscillation cycle (as predicted experimentally); this is the classical mode of vortex shedding leading to formation of the Kármán street. 相似文献
4.
The response of an oscillating circular cylinder at the wake of an upstream fixed circular cylinder was classified by different researchers as galloping, wake induced galloping or wake induced vibration. Furthermore it is already known that a sharp edge square cylinder would undergo galloping if it is subjected to uniform flow. In this study the influence of the wake of a fixed circular cylinder on the response of a downstream square cylinder at different spacing ratios (S/D = 4, 8, 11) is experimentally investigated. The subject appears not to have received previous attention. The lateral displacements, lift forces and the pressure data from gauges mounted in the wake of the oscillating cylinder are recorded and analyzed. The single degree of freedom vibrating system has a low mass-damping parameter and the Reynolds number ranges from 7.7 × 102 to 3.7 × 104.In contrast to that for two circular cylinders in tandem arrangement, the freely mounted downstream square cylinder displays a VIV type of response at all spacing ratios tested. There is no sign of galloping or wake induced galloping with the square cylinder. With increase at the spacing ratio the cross-flow oscillations decrease. It is shown that the vortices arriving from the upstream fixed circular cylinder play a major role on the shedding mechanism behind the downstream square cylinder and cause the square cylinder to shed vortices with frequencies above Strouhal frequency of the fixed square cylinder (St = 0.13). The VIV type of oscillations in the downstream square cylinder is most probably caused by the vortices newly generated behind the square cylinder. 相似文献
5.
The unsteady flow past a circular cylinder which starts translating and transversely oscillating from rest in a viscous fluid is investigated at a Reynolds numbers of R=103 and at a Strouhal number of π/4 and for the maximum oscillatory to translational velocity ratios between 0.1 and 1.0. This study is based on numerical solutions of the two-dimensional unsteady Navier–Stokes equations. The object of the study is to examine the effect of increase of velocity ratio on the near-wake structure as well as the hydrodynamic forces acting on the cylinder. For all velocity rates a periodic structure of vortex evaluation and shedding develops which is repeated exactly as time advances. Vortex dynamics close behind the body are affected by changing acceleration of the cylinder and a changeover from one mode to a different mode of vortex formation is observed with increase in velocity ratio. A comparison of the present results with the impulsively started translating case has been included to illustrate the effect of velocity ratio on drag at small values of velocity ratio. 相似文献
6.
Drag and inertia coefficients for a circular cylinder in steady plus low-amplitude oscillatory flows
Computer simulations of steady plus low-amplitude oscillatory flow about a circular cylinder are reported at a fixed Reynolds number of 150 based on the steady component. The conventional Keleugan–Carpenter number based on the oscillatory component is fixed at π/5. The oscillation frequency is varied so as to study a wide spectrum of flows where inertial forces dominate at one end and viscous drag forces at the other as a function of the modified Keleugan–Carpenter number. The hydrodynamic force on the cylinder in-line with the flow direction is represented by Morison's equation and an extended version with three terms. The drag and inertia coefficients in Morison's equation are determined by least-squares fits to data directly computed from integration of skin friction and pressure distributions around the periphery of the cylinder. The root-mean-square value of the residue of reconstructed minus directly-computed forces varies between 2 and 41% depending on the flow parameters. Comparable results can be obtained with a semi-theoretical approach using inviscid inertia and quasi-steady viscous drag terms. Physical explanations for the variation of the force coefficients are provided and implications for pertinent flow–structure interactions are discussed. 相似文献
7.
The incompressible viscous shear flow past a circular cylinder is analyzed by solving two-dimensional Navier-Stokes equations and pressure Poisson equation using a finite difference method. The shear flow is calculated for Reynolds numbers from 80 to 1000, and shear parameters up to 0.25. The numerical results indicate that the vortex shedding persists at the shear parameters up to 0.25 for the present Reynolds number range. The Strouhal number and the drag coefficient decrease as the shear parameter increases. There is a transverse force acting from the high velocity side toward the low velocity side in the shear flow. 相似文献
8.
The incompressible viscous uniform and shear flow past a circular cylinder is studied. The two-dimensional Navier-Stokes equations are solved by a finite element method. The governing equations are discretized by a weighted residual method in space. The stable three-step scheme is applied to the momentum equations in the time integration. The numerical model is firstly applied to the computation of the lid-driven cavity flow for its validation. The computed results agree well with the measured data and other numerical results. Then, it is used to simulate the viscous uniform and shear flow over a circular cylinder for Reynolds numbers from lO0 to lO00. The transient time interval before the vortex shedding occurs is shortened considerably by introduction of artificial perturbation. The computed Strouhal number, drag and lift coefficients agree well with the experimental data. The computation shows that the finite element model can be successfully applied to the viscous flow problem. 相似文献
9.
Large eddy simulations of the flow around a circular cylinder at high Reynolds numbers are reported. Five Reynolds numbers were chosen, such that the drag crisis was captured. A total of 18 cases were computed to investigate the effect of gridding strategy, turbulence modelling, numerical schemes and domain width on the results. It was found that unstructured grids provide better resolution of key flow features, when a ‘reasonable’ grid size is to be maintained.When using coarse grids for large eddy simulation, the effect of turbulence models and numerical schemes becomes more pronounced. The dynamic mixed Smagorinsky model was found to be superior to the Smagorinsky model, since the model coefficient is allowed to dynamically adjust based on the local flow and grid size. A blended upwind-central convection scheme was also found to provide the best accuracy, since a fully central scheme exhibits artificial wiggles, due to dispersion errors, which pollute the solution.Mean drag, fluctuating lift Strouhal number and base pressure are compared to experiments and empirical estimates for Reynolds numbers ranging from 6.31 × 104 to 5.06 × 105. In terms of the drag coefficient, the drag crisis is well captured by the present simulations, although the other integral quantities (rms lift and Strouhal number) show larger discrepancies. For the lowest Reynolds number, the drag is seen to be more sensitive to the domain width than the spanwise grid spacing, while at the higher Reynolds numbers the grid resolution plays a more important role, due to the larger extent of the turbulent boundary layer. 相似文献
10.
基于光滑粒子流体动力学(SPH)方法,开发了能够准确描述水流作用下圆柱强迫振动特性的数学模型。通过引入适合于无网格粒子法的开边界算法,来模拟出入流边界条件,建立了具有造流功能的SPH数值水槽。圆柱及计算域的上下边界均采用修正的动力边界条件进行模拟。借助于粒子位移矫正和压力修正算法,避免了圆柱周围流体粒子压力大幅震荡以及结构下游区域出现空腔等非物理性现象。使用典型的圆柱绕流数据,验证了所建SPH模型的计算性能,研究了固定圆柱在低雷诺数情况下的尾涡脱落模式和升阻力变化规律。明确了低雷诺数下强迫振动圆柱在频率锁定以及非锁定区间内的升力变化规律,量化了升力与外界激励频率之间的关系。 相似文献
11.
The flow about a circular cylinder placed centrally inside a channel is studied numerically with an unstructured collocated grid finite volume method based on the primitive variable formulation. The distance between the channel walls is allowed to vary to change the blockage ratio. Simulations are carried out over a range of Reynolds numbers that are consistent with the two-dimensional assumption. The study confirms that transition to vortex shedding regime is delayed when the channel walls are close to the cylinder because of the interaction between the vortices from the channel wall and cylinder wake. In the unsteady vortex shedding regime, the wake pattern is opposite to the classic Karman street in respect of the positions of the shed vortices. The cylinder drag coefficient and Strouhal number are considerably increased at smaller gaps while the root-mean-squared lift coefficient is significantly decreased. Several important flow parameters are correlated with the input parameters, namely Reynolds number and blockage ratio. 相似文献
12.
The aim of this paper is to evaluate the accuracy, stability and efficiency of the overset grid approach coupled with the RANS (Reynolds Averaged Navier-Stokes) model via the benchmark computations of flows around a stationary smooth circular cylinder. Two dimensional numerical results are presented within a wide range of Reynolds numbers (6.31 × 104 ∼ 7.57 × 105) including the critical flow regime. All the simulations are carried out using the RANS solver pimpleFoam provided by OpenFOAM, an open source CFD (Computational Fluid Dynamics) toolkit. Firstly, a grid convergence study is performed. The results of the time-averaged drag and lift force coefficients, root-mean square value of lift force coefficient and Strouhal number (St number) are then compared with the experimental data. The velocity, vorticity fields and pressure distribution are also given. One main conclusion is that the numerical solutions in regard to a fixed cylinderare not deteriorated due to the implementation of the overset grid. Furthermore, it can be an appealing approach to facilitate simulations of Vortex Induced Vibrations (VIV), which involves grid deformation. The present study is a good start to implement the overset grid to solve VIV problems in the future. 相似文献
13.
Experiments were conducted to investigate the geometry of the scour hole and flow structure around short cylinders under the action of waves alone (WA) and combined flows (CF). The study is aimed at better understanding the dynamics of isolated objects on a sandy floor under oscillatory flows as occurs in shallow water regions in coastal areas. Flow velocities within the fluid core were recorded and 3D mapping of the bottom was performed with sub-aquatic acoustic sensors. Experiments were conducted for cylinder Reynolds wave number and Keulegan-Carpenter number within the ranges 104Re1.7×105 and 2KC71, respectively. The present experimental evidence shows that the geometric characteristics of the scour hole (length and width) depend primarily on the Keulegan-Carpenter number (KC) and the cylinder aspect ratio (ar=Lc/D). The effect of variation in the angle of attack of the flow with respect to the cylinder main axis was also investigated. Initial orientations of zero and ninety degrees were found to be stable while cylinders with intermediate initial orientations tended to orientate their main axes perpendicular to the flow direction. The final angle of orientation was found to be primarily a function of the Shields parameter, θ, and the initial angle of attack, αi. 相似文献
14.
A series of three-dimensional numerical simulations is carried out to investigate the effect of inclined angle on flow behavior behind two side-by-side inclined cylinders at low Reynolds number Re=100 and small spacing ratio T/D=1.5 (T is the center-to-center distance between two side-by-side cylinders, D is the diameter of cylinder). The instantaneous and time-averaged flow fields, force coefficients and Strouhal numbers are analyzed. Special attention is focused on the axial flow characteristics with variation of the inclined angle. The results show that the inclined angle has a significant effect on the gap flow behaviors behind two inclined cylinders. The vortex shedding behind two cylinders is suppressed with the increase of the inclined angle as well as the flip-flop gap flow. Moreover, the mean drag coefficient, root-mean-square lift coefficient and Strouhal numbers decrease monotonously with the increase of the inclined angle, which follows the independent principle at small inclined angles. 相似文献
15.
The flow around a cylinder, surface mounted or partly buried has been examined at Reynolds number of 1.3×104 and 2.6×104 by using the flow visualization method in the case of steady current. The lengths of the upstream and downstream separation regions were determined and the characteristics of the flow area were discussed for the cylinder having different burial depth to the diameter ratio (G/D). For comparsion, some numerical results obtained from the application of the FLUENT, computational fluid dynamics (CFD) software package have also been presented. Both experimental and numerical results indicated that the lengths of the separation regions near the upstream and downstream of the cylinder decreased with the increasing burial ratio (G/D=0, 0.20, 0.50). The results have significant implications both for the illustration of the potential for using CFD software and highlighting the need for data of two dimensional flow around the buried cylinder. 相似文献
16.
Muk Chen Ong Torbjørn Utnes Lars Erik Holmedal Dag Myrhaug Bjørnar Pettersen 《Coastal Engineering》2010
High Reynolds number flows around a circular cylinder close to a flat seabed have been computed using a two-dimensional standard high Reynolds number k–ε turbulence model. The effects of gap to diameter ratio, Reynolds number and flat seabed roughness for a given boundary layer thickness of the inlet flow upstream of the cylinder have been investigated. Hydrodynamic quantities and the resulting bedload transport have been predicted, and the vortex shedding mechanisms have been investigated. Predictions of hydrodynamic quantities around a cylinder located far away from the bed (so that the effect of the bed is negligible) are in satisfactory agreement with published experimental data and numerical results obtained for the flow around an isolated cylinder. Results for lower Reynolds number flows have also been computed for comparison with the high Reynolds number flow results. Overall it appears that the present approach is suitable for design purposes at high Reynolds numbers which are present near the seabed in the real ocean. 相似文献
17.
Influence of the turbulence intensity and turbulence length scale on the hydrodynamic characteristics and heat transfer of a circular cylinder, streamlined by a viscous fluid flow, is numerically studied. We take the Reynolds number of the oncoming flow equal to 4×104, the turbulence intensity Tuf and the dimensionless turbulence length scale Lf varying from 1.0% to 40% and from 0.25 to 4.0, respectively. We confirmed that the increase of Tuf leads to the suppression of the periodic vortex shedding from the cylinder surface, and as a result the stationary mode of streamlining is formed. Consequently, with the increasing turbulence intensity directly in front of the cylinder Tu*, the amplitude of the lift coefficient decreases monotonically. Nevertheless, the time-averaged drag coefficient of the streamlined cylinder decreases at Tu*<6.0%, and increases at Tu*>9.0%. The dependence of the average Nusselt number on Tu* is near-linear, and with the increasing turbulence intensity, the Nusselt number rises. However, the change of the average Nusselt number depending on Lf is non-monotonic and at Lf=1.0, the value reaches its maximum. 相似文献
18.
A horizontal, circular cylinder fitted with one bilge keel is forced to rotate harmonically around its axis. The bilge keel load and hull pressure distribution are investigated. A fully submerged condition (infinite fluid), and three partly-submerged conditions are considered. A two-dimensional numerical study is performed, and the results are validated against recently published experimental data by van’t Veer et al. [30]. In addition, comparisons for mass and drag coefficients are also made with experimental data for plate in infinite fluid (Keulegan and Carpenter [8]), and wall-mounted plate (Sarpkaya and O’Keefe [9]) in oscillatory flow.A Navier–Stokes solver based on the Finite Volume Method is adopted for solving laminar flow of incompressible water. The free-surface condition is linearized by neglecting the nonlinear free-surface terms and the influence of viscous stresses in the free surface zone, while the body-boundary condition is exact. This simplified modeling of the problem required the mesh to be fine only around the bilge keels, leading to a total number of cells around N ≃ 1 ×104, which reduced computational cost significantly.The influence of draft and amplitude of oscillations on the bilge keel force and hull pressure distribution are considered. The bilge keel force is presented in terms of non-dimensional drag and mass coefficients including higher harmonic components. The numerical results are also compared with the industry standard empirical method for calculation of roll damping proposed by Ikeda et al. [4]. In general, a good agreement between the results of the present numerical method and the experimental data is obtained and the differences with those predicted by the empirical method are addressed. 相似文献
19.
When fluid flow passes a cylinder, the drag crisis phenomenon occurs between the sub-critical and the super-critical Reynolds numbers. The focus of the present studies was on the numerical prediction of the drag crisis based on CFD methods. In this work, block structured meshes with refined grids near the cylinder surface and in the downstream were employed. Both 2D and 3D simulations were performed using various turbulence models, including the SST k − ω model, the k − ϵ model, the SST with LCTM, the DES model, and the LES model. In the convergence studies, the effects of the grid size, the time step, the first grid size and the aspect ratio (for 3D simulations) on the solutions were examined. The errors due to spatial and time discretizations were quantified according to a V&V procedure. Validation studies were carried out for various Reynolds numbers between Re = 6.31 × 104 and 7.57 × 105. The averaged drag force, the RMS of lift force and the Strouhal number were compared with experimental data. The studies indicated that standard 2D and 3D RANS methods were inadequate to capture the drag crisis phenomenon. The LES method however has the potential to address the problem. 相似文献
20.
Hydrodynamic forces on a partly buried cylinder exposed to combined waves and current 总被引:1,自引:0,他引:1
The present study extends the investigations of the hydrodynamic forces on a cylinder, laid on, or partly buried in the bed. They were determined by measuring the pressure distribution on the cylinder surface in the case of steady current, waves and coexisting flow. The pressure distribution around the cylinder was measured by using pressure transducers, which were replaced in the cylinder. Force coefficients were obtained for the ranges of Re=0.8×104–1.5×104, for steady current, low KC numbers (KC<5) for wave alone case and, for current-to-wave velocity RATIO=0, 3, 6 and infinity (current) for coexisting flow. The forces were also determined for the various burial-depth-to-diameter ratios between 0 and 0.7 values of the cylinder. 相似文献