Imaging a shallow salt diapir using ambient seismic vibrations beneath the densely built-up city area of Hamburg,Northern Germany

Salt diapirs are common features of sedimentary basins. If close to the surface, they can bear a significant hazard due to possible dissolution sinkholes, karst formation and collapse dolines or their influence on ground water chemistry. We investigate the potential of ambient vibration techniques to map the 3-D roof morphology of shallow salt diapirs. Horizontal-to-vertical (H/V) spectral peaks are derived at more than 900 positions above a shallow diapir beneath the city area of Hamburg, Germany, and are used to infer the depth of the first strong impedance contrast. In addition, 15 small-scale array measurements are conducted at different positions in order to compute frequency-dependent phase velocities of Rayleigh waves between 0.5 and 25 Hz. The dispersion curves are inverted together with the H/V peak frequency to obtain shear-wave velocity profiles. Additionally, we compare the morphology derived from H/V and array measurements to borehole lithology and a gravity-based 3-D model of the salt diapir. Both methods give consistent results in agreement with major features indicated by the independent data. An important result is that H/V and array measurements are better suited to identify weathered gypsum caprocks or gypsum floaters, while gravity-derived models better sample the interface between sediments and homogeneous salt. We further investigate qualitatively the influence of the 3-D subsurface topography of the salt diapir on the validity of local 1-D inversion results from ambient vibration dispersion curve inversion.     

Detecting the flow relationships between deep and shallow aquifers in an exploited groundwater system,using long‐term monitoring data and quantitative hydrogeology: the Acque Albule basin case (Rome,Italy)

Five years of hydrogeological monitoring and field activities performed in the complex hydrogeological system of the Acque Albule basin (AAB) were conducted to define the hydrogeological setting, the relationship between deep and shallow aquifers and a conceptual groundwater flow model of this exploited area using conventional quantitative techniques. The basin, which is located close to Rome (Italy) on the west side of the Apennine chain and just north of the Colli Albani volcano, subsided after development of a north–south fault system (about 115 000 y bp). The AAB experiences intense hydrothermal activity, which has produced a large travertine deposit (80‐m thick). The travertine deposit constitutes a fractured aquifer that is the final destination of more than 5 m³ s^‐1 of water and is strongly dewatered by quarry activities. The complex hydrogeology of this basin was investigated, revealing two main hydraulically connected aquifers, one thermalised and partly confined into the limestone bedrock and one unconfined in the travertine. The two aquifers are separated by a non‐continuous clayey aquiclude. The hydrogeological survey and geological characterisation contributed to the development of the groundwater flow conceptual model. Analysis and comparison of the monitored levels highlighted the pattern of flow between the deep and shallow parts of the flow system. Copyright © 2012 John Wiley & Sons, Ltd.     

Alpine Hydrogeology: The Critical Role of Groundwater in Sourcing the Headwaters of the World

Groundwater discharge in alpine headwaters sustains baseflow in rivers originating in mountain ranges of the world, which is critically important for aquatic habitats, run-of-river hydropower generation, and downstream water supply. Groundwater storage in alpine watersheds was long considered negligible, but recent field-based studies have shown that aquifers are ubiquitous in the alpine zone with no soil and vegetation. Talus, moraine, and rock glacier aquifers are common in many alpine regions of the world, although bedrock aquifers occur in some geological settings. Alpine aquifers consisting of coarse sediments have a fast recession of discharge after the recharge season (e.g., snowmelt) or rainfall events, followed by a slow recession that sustains discharge over a long period. The two-phase recession is likely controlled by the internal structure of the aquifers. Spatial extent and distribution of individual aquifers determine the groundwater storage-discharge characteristics in first- and second-order watersheds in the alpine zone, which in turn govern baseflow characteristics in major rivers. Similar alpine landforms appear to have similar hydrogeological characteristics in many mountain ranges across the world, suggesting that a common conceptual framework can be used to understand alpine aquifers based on geological and geomorphological settings. Such a framework will be useful for parameterizing storage-discharge characteristics in large river hydrological models.     

Improved salt imaging in a basin context by high resolution potential field data: Nordkapp Basin,Barents Sea

The seismic imaging of salt diapirs in the Nordkapp Basin gave rise to considerable problems in defining their shape and volume. Independent information was added by integrating the interpretation with high resolution gravity and magnetic data. We developed a novel, iterative workflow, separated into sub‐categories: sediments, salt structures, basement and Moho. Distinctions between the sources of the anomalies from different depths was achieved by utilizing the different decay characteristics of gravity, gravity gradiometry and high resolution magnetic anomalies. The workflow was applied to the southern part of the Nordkapp Basin. It started with the sedimentary model derived from seismics, populated with measured densities and magnetic susceptibilities and a starting model for the base salt. The residual after the removal of this model was interpreted in terms of a crustal model, including flexural isostatic calculations for the Moho with the sedimentary load. The residual after the removal of crustal and early sedimentary model was used to tune the salt model. As these major and minor modelling steps depend on each other, an iterative process was applied to stepwise improve the density and magnetic susceptibility model. The first vertical gradient of gravity and the magnetic field were found to give most information about the cap rock of the diapirs. The improvement in salt imaging, integrated with results from controlled‐source electromagnetic and magneto‐telluric modelling is shown for the salt diapir Uranus, where a well, terminated in the salt, constrains the minimum of the depth to base salt.     

Modeling the Transient Response of Saline Intrusion to Rising Sea‐Levels

Sea levels are expected to rise as a result of global temperature increases, one implication of which is the potential exacerbation of sea water intrusion into coastal aquifers. Given that approximately 70% of the world's population resides in coastal regions, it is imperative to understand the interaction between fresh groundwater and sea water intrusion in order to best manage available resources. For this study, controlled investigation has been carried out concerning the temporal variation in sea water intrusion as a result of rising sea levels. A series of fixed inland head two‐dimensional sea water intrusion models were developed with SEAWAT in order to assess the impact of rising sea levels on the transient migration of saline intrusion in coastal aquifers under a range of hydrogeological property conditions. A wide range of responses were observed for typical hydrogeological parameter values. Systems with a high ratio of hydraulic conductivity to recharge and high effective porosity lagged behind the equilibrium sea water toe positions during sea‐level rise, often by many hundreds of meters, and frequently taking several centuries to equilibrate following a cease in sea‐level rise. Systems with a low ratio of hydraulic conductivity to recharge and low effective porosity did not develop such a large degree of disequilibrium and generally stabilized within decades following a cease in sea‐level rise. This study provides qualitative initial estimates for the expected rate of intrusion and predicted degree of disequilibrium generated by sea‐level rise for a range of hydrogeological parameter values.     

Using geophysical methods to characterize an abandoned uranium mining site,Portugal

A major plan for Portugal Mainland is being envisaged to use old open pits from abandoned uranium mining sites as “Waste Containment Deposits”. These areas will store mining waste from other adjacent mines. The old mining sites classification to this kind of usage is carried out accordingly to its location, accessibility, geological and hydrogeological conditions. Mining waste deposition in the open pits may however cause environmental problems related with geological and hydrogeological features that must be predicted and prevented before a particular site is chosen. Therefore, the identification of faults and conductive zones that may promote groundwater circulation and the spread of contaminated waters is of great importance, since the surrounding area is highly populated. The possible negative environmental impacts of the presence of such potential waste disposal sites are therefore being assessed using geophysical methods and geological outcrop studies in several geological and hydrogeological critical areas. The abandoned Quinta do Bispo uranium mine is one of such places. This old open pit, chosen as one of the sites to be used in the near future as a “Waste Containment Deposit” (accordingly to the above mentioned criteria), needs to be characterized at depth to prevent any possible negative environmental impacts. Thus, the acquisition, processing and interpretation of electromagnetic, electrical and both seismic refraction and reflection have been carried out. 2D schematic models have been constructed, showing alteration and faults zones at depth. These fault zones control groundwater circulation and therefore, future water circulation problems with negative environmental impact may be predicted and prevented.     

Groundwater Deterioration of Shallow Groundwater Aquifers Due to Overexploitation in Northeast Jordan

Groundwater is the major water resource in Jordan and most of the groundwater basins are already exploited beyond their estimated safe yield. Azraq basin is one of the most important groundwater basins in Jordan, which supplies Amman with drinking water. However, due to overpumping from the shallow groundwater aquifers, the water level dropped dramatically and signs of salinization and depletion are starting to occur. The severe drawdown in the Azraq well‐field caused a reverse in the hydraulic gradient and consequently, the saltwater in the center of the basin (Qa‐Azraq) started to move in the direction of the well‐field. The salinization in the shallow aquifer (basalt/B5/B4) is believed to result from one of the following scenarios: (i) a reverse flow from Sabkha to the AWSA well field, (ii) an upward leakage from the middle aquifer system (B2/A7) and the combined B3 Aquitard‐B2/A7 aquifer, (iii) a dissolution process between the water and rock matrix due to lowering of the dynamic water levels during pumping which reached the mineralized formations underlying the Basalt. The salinization trend of some AWSA wells represented by the gradual increase of major ions is associated with rather constant stable isotopic contents. This indicates that these constituents originate from the main minerals existing in the matrix of the aquifers and thus this scenario is the most likely to occur.     

The Interface Configuration of the Fresh‐/Dead Sea Water – Theory and Measurements

The high‐density Dead Sea water (1.235 g/cm³) forms a special interface configuration with the fresh groundwater resources of its surrounding aquifers. The fresh groundwater column beneath its surroundings is around one tenth of its length compared to oceanic water. This fact alone indicates the vulnerability of the fresh groundwater resources to the impacts of changes in the Dead Sea level and to saltwater migration. Ghyben‐Herzberg and Glover equations were used to calculate the volumes of water in coastal aquifers which were replaced by freshwater due to the interface seaward migration as a result of the drop in the level of the Dead Sea. For that purpose, the dynamic equation of Glover approach has been integrated to accommodate that type of interface readjustment. The calculated amounts of freshwater which substituted salt Dead Sea water due to the migration of interface are 3.21 · 10¹¹ m³, from a Dead Sea level of –392 m to τ411 m below sea level. The average porosity of coastal aquifers was calculated to range from 2.8 to 2.94%. Geoelectric sounding measurements showed that areas underlying the coastal aquifers formerly occupied by the Dead Sea water are gradually becoming flushed and occupied by freshwater. The latter is becoming salinized due to the residuals of Dead Sea water in the aquifer matrix, the present salinity of which is lower than that of the Dead Sea water. At the same time salt dissolution from the Lisan Marl formation is causing collapses along the shorelines in the form of sinkholes, tens of meters in diameter and depth.     

Groundwater quality in Mesogea basin in eastern Attica (Greece)

Studies on the hydrogeological conditions of the Mesogea basin in east Attica reveal that the aquifers developed on the post‐alpine formations at the inner part of the coastal brackish zone exhibit positive hydraulic head. These Neogene and Quaternary deposits present high salt concentrations. Selected points were sampled (total 85: 51 wells and 34 boreholes) in order to obtain hydrogeological and hydrochemical data for a better understanding of the structure, operation and dynamics of the aquifer of the area. Statistical methods, R‐mode factor analysis and scatter‐plot diagrams were used for the hydrochemical analysis and presentation of the data. The groundwater resources are relatively weak and there is significant quality degradation due to the geological structure of the greater area, as well as the bad management of the aquifer and anthropogenic activities. Groundwater is characterized by high salt concentrations. Electrical conductivity values range between 260 and 6970 µS cm^?1. High salt concentrations at the coastal aquifers are due to sea intrusion, whereas they are attributed to the dissolution of minerals of the geological environment in the inland area. The groundwaters of the study area can be classified into five water types: Ca–HCO₃, Mg–HCO₃, Na–HCO₃, Na–Cl and Mg–Cl. They are saturated in dolomite and calcite, whereas they are unsaturated in anhydrite. High ion concentrations, e.g. ] (0‐221 mg l^?1), ] (0·01‐1·88 mg l^?1), ] (0·01‐6·75 mg l^?1), as well as high heavy metals concentrations are attributed to anthropogenic impacts. Copyright © 2006 John Wiley & Sons, Ltd.     

A re-evaluation of metal diapir breakup and equilibration in terrestrial magma oceans

Due to mechanisms such as impact heating, early atmospheric thermal blanketing, and radioactive heating, the presence of at least one global magma ocean stage in the early histories of terrestrial planets seems unavoidable. In such a context, a key question to constrain the early thermo–chemical evolution of the Earth is how much iron diapirs provided by differentiated impactors emulsified during their sinking towards the bottom of an early magma ocean.In the past years, several workers have focused on this question, using however various approaches and making different assumptions. While most studies favor rapid breakup and equilibration of iron bodies during their sinking through the magma ocean, recent work suggests that iron bodies of size comparable or greater than a few tens of kilometers may preserve most of their initial volume as they reach the bottom of a magma ocean, therefore leading to metal–silicate disequilibrium.To clarify the discrepancies and the differences among studies I have conducted a series of numerical simulations and theoretical calculations to derive the conditions and the timing for the breakup of metal diapirs of any size, sinking through a silicate magma ocean, with a large range of plausible viscosity values. The obtained breakup criterion is used to derive stable diapir sizes and their ability to equilibrate with the surrounding silicates. I show that for plausible magma ocean viscosities, diapirs with initial radii smaller than the thickness of a magma ocean rapidly break up into stable diapir sizes smaller than 0.2 m, at which metal–silicate equilibration is rapidly achieved.     

Estimation of groundwater vulnerability to pollution based on DRASTIC in the Niipele sub-basin of the Cuvelai Etosha Basin,Namibia

Surface water is a scarce resource in Namibia with about sixty percent of Namibia's population dependent on groundwater for drinking purposes. With increasing population, the country faces water challenges and thus groundwater resources need to be managed properly. One important aspect of Integrated Water Resources Management is the protection of water resources, including protection of groundwater from contamination and over-exploitation. This study explores vulnerability mapping as a basic tool for protecting groundwater resources from pollution. It estimates groundwater vulnerability to pollution in the upper Niipele sub-basin of the Cuvelai-Etosha in Northern Namibia using the DRASTIC index. The DRASTIC index uses GIS to estimate groundwater vulnerability by overlaying different spatially referenced hydrogeological parameters that affect groundwater contamination. The study assesses the discontinuous perched aquifer (KDP) and the Ohangwena multi-layered aquifer 1 (KOH-1). For perched aquifers, point data was regionalized by a hydrotope approach whereas for KOH-1 aquifer, inverse distance weighting was used. The hydrotope approach categorized different parts of the hydrogeological system with similar properties into five hydrotopes. The result suggests that the discontinuous perched aquifers are more vulnerable than Ohangwena multi-layered aquifer 1. This implies that vulnerability increases with decreasing depth to water table because contaminants have short travel time to reach the aquifer when they are introduced on land surface. The nitrate concentration ranges between 2 and 288 mg/l in perched aquifers while in Ohangwena multi-layered aquifer 1, it ranges between 1 and 133 mg/l. It was observed that perched aquifers have high nitrate concentrations than Ohangwena 1 aquifer, which correlates well with the vulnerability results.     

Degrees of melting in mantle diapirs and the origin of ultrabasic liquids

The temperature and degree of melting in an upwelling diapir in the mantle may be considerably less than that anticipated from an adiabatic cooling curve. Several geological and thermodynamic parameters may be incorporated to produce a more realistic melting model in diapirs. The latent heat of fusion of mantle material is the greatest buffer on degrees of melting. Models are presented which suggest that an uprising diapir intersecting the anhydrous solidus of mantle material at 50 kbars may be only 29% melted on reaching the surface. A diapir initiated at 100 kbars may be 69% melted. These are maximum values. These calculations imply that the generation of komatiitic liquids by diapiric uprise alone demands that the diapir originate at depths in excess of 300 km. Melting of mantle with an irregular geotherm is preferred for the origin of these liquids.     

Control of preexisting faults and near-surface diapirs on geometry and kinematics of fold-and-thrust belts (Internal Prebetic,Eastern Betic Cordillera)

We have determined, for the first time, the 3D geometry of a sector of the eastern Internal Prebetic comprised between Parcent and Altea diapirs, combining structural, borehole and multichannel seismic reflection data. The tectonic structure of the Jurassic-Cretaceous carbonate series is characterized by regional ENE-WSW fold-and-thrusts that interact with oblique N-S and WNW-ESE folds, detached over Triassic evaporites and clays. The structural style comprises box-shape anticlines, and N-vergent anticlines with vertical to overturned limbs frequently bordered by reverse and strike-slip faults. The anticlines surround a triangular broad synclinal structure, the Tárbena basin, filled by a late Oligocene to Tortonian sedimentary sequence that recorded folding and thrusting history. The location and geometrical characteristics of fold-and-thrusts may be controlled by the positive inversion of pre-existing Mesozoic normal faults, and by the position and shape of near-surface diapirs composed of Triassic rocks. Therefore, we propose an initial near-surface diapir emplacement of Triassic evaporitic rocks driven by late Jurassic to early Cretaceous rifting of the southern Iberian paleomargin. Thrusting and folding started during the latest Oligocene (∼28–23 Ma) roughly orthogonal to the NW-directed shortening. Deformation migrated to the south during Aquitanian (∼23–20 Ma), when tectonic inversion implied the left-lateral transpressive reactivation of N-S striking former normal faults and right-lateral/reverse reactivation of inherited WNW-ESE faults. We show two mechanisms driving the extrusion of the diapirs during contraction: lateral migration of a pre-existing near-surface diapir associated with dextral transpression; and squeezing of a previous near-surface diapir at the front of an anticline. Our study underlines the value of 3D geological modeling to characterize geometry and kinematics of complex fold-and-thrust belts influenced by preexisting faults and near-surface diapirs.     

Groundwater Resources Potential in Hard Rock Terrain: A Multivariate Approach

Groundwater resources are limited and difficult to predict in crystalline bedrock due to heterogeneity and anisotropy in rock fracture systems. Municipal‐level governments often lack the resources for traditional hydrogeological tests when planning for sustainable use of water resources. A new methodology for assessing groundwater resources potential (GRP) based on geological and topographical factors using principal component analysis (PCA) and analysis of variance (ANOVA) was developed and tested. ANOVA results demonstrated statistically significant differences in classed variable groups as well as in classed GRP scores with regard to hydrogeological indicators, such as specific capacity (SC) and transmissivity. Results of PCA were used to govern the weight of the variables used in the prediction maps. GRP scores were able to identify 79% of wells in a verification dataset, which had SC values less than the total dataset median. GRP values showed statistically significant correlations using both parametric (using transformed datasets) and non‐parametric methods. The method shows promise for municipal or regional level planning in crystalline terrains with high levels of heterogeneity and anisotropy as a hydrogeologically and statistically based tool to assist in assessing groundwater resources. The methodology is executed in a geographic information systems environment, and uses often readily available data, such as geological maps, feature maps and topography, and thus does not require expensive and time‐consuming aquifer tests.     

Groundwater interaction assessment based on the large-scale mapping of geological and hydrogeological conditions in Moscow

Assessing the interaction between aquifers is crucial for estimating the extent of protection of the aquifer in Carboniferous limestone (which is the main source of potable water supply to Moscow area) against contaminants penetrating from the overlying aquifers. The presented approach to assessing groundwater interaction and protection is based on large-scale mapping of the geological and hydrogeological conditions in Moscow. The obtained results may be used for solving the problem of groundwater protection against contamination, as well as for planning the engineering activities in the city.     

Structural and Hydrogeological Controls on Hydrocarbon and Brine Migration into Drinking Water Aquifers in Southern New York

Environmental concerns regarding the potential for drinking water contamination in shallow aquifers have accompanied unconventional energy development in the northern Appalachian Basin. These activities have also raised several critical questions about the hydrogeological parameters that control the naturally occurring presence and migration of hydrocarbon gases in shallow aquifers within petroliferous basins. To interrogate these factors, we analyzed the noble gas, dissolved ion, and hydrocarbon gas (molecular and isotopic composition) geochemistry of 98 groundwater samples from south‐central New York. All samples were collected ?1km from unconventional drilling activities and sample locations were intentionally targeted based on their proximity to various types of documented fault systems. In agreement with studies from other petroliferous basins, our results show significant correlations between elevated levels of radiogenic [⁴He], thermogenic [CH₄], and dissolved ions (e.g., Cl, Br, Sr, Ba). In combination, our data suggest that faults have facilitated the transport of exogenous hydrocarbon‐rich brines from Devonian source rocks into overlying Upper Devonian aquifer lithologies over geologic time. These data conflict with previous reports, which conclude that hydrodynamic focusing regulates the occurrence of methane and salt in shallow aquifers and leads to elevated levels of these species in restricted flow zones within valley bottoms. Instead, our data suggest that faults in Paleozoic rocks play a fundamental role in gas and brine transport from depth, regulate the distribution of their occurrence in shallow aquifers, and influence the geochemistry of shallow groundwater in this petroliferous basin.     

应用核磁共振技术分析干盐湖地区地下卤水空间分布特征——以昆特依干盐湖为例

昆特依干盐湖位于柴达木盆地西北部,为特大型综合盐类矿床.大盐滩是昆特依干盐湖内最大的盐滩,地下赋存有一定量的卤水矿床,但该矿床的水文地质条件差,主要卤水矿层含水性弱,开采难度大.核磁共振找水方法作为当今世界上唯一的直接找水地球物理新方法,具有高分辨力、高效率、信息量丰富和解的唯一性等优点,本文运用该方法对昆特依干盐滩地区地下卤水空间分布特征进行研究,通过对核磁共振数据进行处理与反演,结合已有的地质与钻井资料,对测点进行综合地质-地球物理解释,获得以下认识:1)大盐滩0~130 m深度范围内,共存在3个卤水含水层,主要呈扁平状或漏斗状、近似层状展布,W1为晶间潜卤水层,渗透系数较大,颗粒较粗,单位体积含水量为0.4%~2.7%,W2和W3为晶间承压卤水层,渗透系数较小,颗粒较粗,单位体积含水量分别为0.2%~1.1%和0.1%~0.8%;2)大盐滩地区存在两个卤水富集区,分别为研究区西南部沉积盆地中心的Ⅰ号富卤区和盆地东北部的Ⅱ号富卤区;3)根据区域内卤水富集分布以及构造情况,划定大盐滩向斜沉积中心、大盐滩北侧F1~F8及遥F6断裂发育区和冷湖构造带为区域内主要的找矿找水远景区;4)GMR核磁共振系统在干盐滩地区理论探测深度为130 m,该系统不仅可以有效地探测自由水,而且可以依据束缚水的分布解译地下各类含水盐类矿物和含水黏土矿物的存在与分布.     

Tracking Groundwater Discharge to a Large River using Tracers and Geophysics

Few studies have investigated large reaches of rivers in which multiple sources of groundwater are responsible for maintaining baseflow. This paper builds upon previous work undertaken along the Fitzroy River, one of the largest perennial river systems in north‐western Australia. Synoptic regional‐scale sampling of both river water and groundwater for a suite of environmental tracers (⁴He, ⁸⁷Sr/⁸⁶Sr, ²²²Rn and major ions), and subsequent modeling of tracer behavior in the river, has enabled definition and quantification of groundwater input from at least three different sources. We show unambiguous evidence of both shallow “local” groundwater, possibly recharged to alluvial aquifers beneath the adjacent floodplain during recent high‐flow events, and old “regional” groundwater introduced via artesian flow from deep confined aquifers. We also invoke hyporheic exchange and either bank return flow or parafluvial flow to account for background ²²²Rn activities and anomalous chloride trends along river reaches where there is no evidence of the local or regional groundwater inputs. Vertical conductivity sections acquired through an airborne electromagnetic (AEM) survey provide insights to the architecture of the aquifers associated with these sources and general groundwater quality characteristics. These data indicate fresh groundwater from about 300 m below ground preferentially discharging to the river, at locations consistent with those inferred from tracer data. The results demonstrate how sampling rivers for multiple environmental tracers of different types—including stable and radioactive isotopes, dissolved gases and major ions—can significantly improve conceptualization of groundwater—surface water interaction processes, particularly when coupled with geophysical techniques in complex hydrogeological settings.     

A graphical approach for documenting peatland hydrodiversity and orienting land management strategies

This study focuses on the development of an approach to document the hydrological characteristics of peatlands and understand their potential influence on runoff processes and groundwater flow dynamics. Spatial calculations were performed using geographic information systems data in order to evaluate the distribution of peatlands according to (a) neighbouring hydrogeological units and (b) their position within the hydrographic network. The data obtained from these calculations were plotted in a multiple trilinear diagram (two ternary plots projected into a diamond‐shaped diagram) that illustrates the position of a given peatland within the hydrogeological environment. The data allow for the segregation of peatlands according to groups sharing similarities as well as the identification of peatlands that are most likely to have similar hydrological functions. The approach was tested in a 19,549 km² region of the southern portion of the Barlow‐Ojibway Clay Belt (in Abitibi‐Témiscamingue, Canada) and lead to a conceptual model representing the hydrological interactions between peatlands, aquifers, and surface waters. This approach allows for a geographic information systems‐based differentiation of headwater peatland complexes that are likely to interact with aquifers and to supply continuous baseflow to small streams from lowland peatland complexes of the clay plain that are isolated from surrounding aquifers but that can act as storage reservoirs within the hydrographic network. The typology is further used to discuss land management strategies aimed at preserving peatland hydrodiversity within the study region. The proposed approach relies on widely applicable hydrogeological and hydrographic criteria and provides a tool that could be used for assessing peatland hydrodiversity in other regions of the planet.     

CALCULATIONS ON THE THERMAL CONDITIONS AROUND A SALT DIAPIR*

Temperature modeling around the Vejrum salt structure in Denmark shows that the heat flow near the top is twice the regional heat flow. The temperature in the vicinity of the top of the diapir is thus anomalously high. Overlying permeable formations could therefore be attractive for geothermal energy exploitation. A negative temperature anomaly of ?20°C is calculated around the root of the salt body. Comparisons between calculated and measured temperatures are used to test the model. It is shown that measurements of heat flow (or temperature gradients) in wells penetrating the region of groundwater circulation could be used in identification of salt diapirs.