Crude Oil at the Bemidji Site: 25 Years of Monitoring,Modeling, and Understanding

The fate of hydrocarbons in the subsurface near Bemidji, Minnesota, has been investigated by a multidisciplinary group of scientists for over a quarter century. Research at Bemidji has involved extensive investigations of multiphase flow and transport, volatilization, dissolution, geochemical interactions, microbial populations, and biodegradation with the goal of providing an improved understanding of the natural processes limiting the extent of hydrocarbon contamination. A considerable volume of oil remains in the subsurface today despite 30 years of natural attenuation and 5 years of pump‐and‐skim remediation. Studies at Bemidji were among the first to document the importance of anaerobic biodegradation processes for hydrocarbon removal and remediation by natural attenuation. Spatial variability of hydraulic properties was observed to influence subsurface oil and water flow, vapor diffusion, and the progression of biodegradation. Pore‐scale capillary pressure‐saturation hysteresis and the presence of fine‐grained sediments impeded oil flow, causing entrapment and relatively large residual oil saturations. Hydrocarbon attenuation and plume extent was a function of groundwater flow, compound‐specific volatilization, dissolution and biodegradation rates, and availability of electron acceptors. Simulation of hydrocarbon fate and transport affirmed concepts developed from field observations, and provided estimates of field‐scale reaction rates and hydrocarbon mass balance. Long‐term field studies at Bemidji have illustrated that the fate of hydrocarbons evolves with time, and a snap‐shot study of a hydrocarbon plume may not provide information that is of relevance to the long‐term behavior of the plume during natural attenuation.     

A simple method for calculating growth rates of petroleum hydrocarbon plumes

Consumption of aquifer Fe(III) during biodegradation of ground water contaminants may result in expansion of a contaminant plume, changing the outlook for monitored natural attenuation. Data from two research sites contaminated with petroleum hydrocarbons show that toluene and xylenes degrade under methanogenic conditions, but the benzene and ethylbenzene plumes grow as aquifer Fe(III) supplies are depleted. By considering a one-dimensional reaction front in a constant unidirectional flow field, it is possible to derive a simple expression for the growth rate of a benzene plume. The method balances the mass flux of benzene with the Fe(III) content of the aquifer, assuming that the biodegradation reaction is instantaneous. The resulting expression shows that the benzene front migration is retarded relative to the ground water velocity by a factor that depends on the concentrations of hydrocarbon and bioavailable Fe(III). The method provides good agreement with benzene plumes at a crude oil study site in Minnesota and a gasoline site in South Carolina. Compared to the South Carolina site, the Minnesota site has 25% higher benzene flux but eight times the Fe(III), leading to about one-sixth the expansion rate. Although it was developed for benzene, toluene, ethylbenzene, and xylenes, the growth-rate estimation method may have applications to contaminant plumes from other persistent contaminant sources.     

Land Application of Sulfate Salts for Enhanced Natural Attenuation of Benzene in Groundwater: A Case Study

Sulfate reducing conditions are widely observed in groundwater plumes associated with petroleum hydrocarbon releases. This leads to sulfate depletion in groundwater which can limit biodegradation of hydrocarbons (usually benzene, toluene, ethylbenzene, xylenes [BTEX] compounds) and can therefore result in extended timeframes to achieve groundwater cleanup objectives by monitored natural attenuation. Under these conditions, sulfate addition to the subsurface can potentially enhance BTEX biodegradation and facilitate enhanced natural attenuation. However, a delivery approach that enables effective contact with the hydrocarbons and is able to sustain elevated and uniform sulfate concentrations in groundwater remains a key challenge. In this case study, sulfate addition to a groundwater plume containing predominantly benzene by land application of agricultural gypsum and Epsom salt is described. Over 4 years of groundwater monitoring data from key wells subjected to pilot‐scale and site‐wide land application events are presented. These are compared to data from pilot testing employing liquid Epsom salt injections as an alternate sulfate delivery approach. Sulfate land application, sulfate retention within the vadose zone, and periodic infiltration following ongoing precipitation events resulted in elevated sulfate concentrations (>150 mg/L) in groundwater that were sustained over 12 months between application events and stimulated benzene biodegradation as indicated by declines in dissolved benzene concentration, and compound‐specific isotope analysis data for carbon in benzene. Long‐term groundwater benzene concentration reductions were achieved in spite of periodic rebounds resulting from water table fluctuations across the smear zone. Land application of gypsum is a potentially cost‐effective sulfate delivery approach at sites with open, unpaved surfaces, relatively permeable geology, and shallow hydrocarbon impacts. However, more research is needed to understand the fate and persistence of sulfate and to improve the likelihood of success and effectiveness of this delivery approach.     

Crude Oil Metabolites in Groundwater at Two Spill Sites

Two groundwater plumes in north central Minnesota with residual crude oil sources have 20 to 50 mg/L of nonvolatile dissolved organic carbon (NVDOC). These values are over 10 times higher than benzene and two to three times higher than Diesel Range Organics in the same wells. On the basis of previous work, most of the NVDOC consists of partial transformation products from the crude oil. Monitoring data from 1988 to 2015 at one of the sites located near Bemidji, MN show that the plume of metabolites is expanding toward a lakeshore located 335 m from the source zone. Other mass balance studies of the site have demonstrated that the plume expansion is driven by the combined effect of continued presence of the residual crude oil source and depletion of the electron accepting capacity of solid phase iron oxide and hydroxides on the aquifer sediments. These plumes of metabolites are not covered by regulatory monitoring and reporting requirements in Minnesota and other states. Yet, a review of toxicology studies indicates that polar metabolites of crude oil may pose a risk to aquatic and mammalian species. Together the results suggest that at sites where residual sources are present, monitoring of NVDOC may be warranted to evaluate the fates of plumes of hydrocarbon transformation products.     

The Role of Bioattenuation in the Management of Aromatic Hydrocarbon Plumes in Aquifers

Ground water scientists have made significant advances in understanding the soil interactions, hydrogeology, fate and transport, and subsurface microbiology of aromatic hydrocarbons (BTEX) in aquifer systems. It is now generally recognized that a major factor responsible for the attenuation and mass reduction of BTEX in plumes is the widespread occurrence of hydrocarbon biodegradation by indigenous soil microorganisms in aquifer material. Most well-studied BTEX plumes that develop from the accidental release of gasoline fuels contain low levels of soluble hydrocarbons (< 1 to 5000 ppb) and have been shown to be spatially confined because of natural biotransformation mechanisms. These in situ processes are controlled by source and aquifer characteristics, permeability, sorption, and geochemical properties of the aquifer. Many laboratory subsoil-ground water microcosms and field studies (10 to 20 C) have demonstrated the rapid biodecay (1 to SO percent/day for microcosms and 0.5 to 1.5 percent/day for plumes) of these aromatic compounds under primarily aerobic conditions (i.e., those with sufficient dissolved oxygen). The ability to implement ground water bioremediation will depend upon our understanding of source control and aquifer recharge effects on the spatial distribution of plumes. In addition, estimating the biodegradation of sorbed BTEX, determining limits and potential for in situ biostimulation of soluble plumes, and establishing data requirements for predictive modeling of natural attenuation will be useful for this remediation technology. The use of these tools to manage ground water quality appears to represent the most practical alternative, particularly for low-risk ground water supplies.     

Evaluation of Seasonal Factors on Petroleum Hydrocarbon Vapor Biodegradation and Intrusion Potential in a Cold Climate

A detailed seasonal study of soil vapor intrusion at a cold climate site with average yearly temperature of 1.9 °C was conducted at a house with a crawlspace that overlay a shallow dissolved‐phase petroleum hydrocarbon (gasoline) plume in North Battleford, Saskatchewan, Canada. This research was conducted primarily to assess if winter conditions, including snow/frost cover, and cold soil temperatures, influence aerobic biodegradation of petroleum vapors in soil and the potential for vapor intrusion. Continuous time‐series data for oxygen, pressure differentials, soil temperature, soil moisture, and weather conditions were collected from a high‐resolution monitoring network. Seasonal monitoring of groundwater, soil vapor, crawlspace air, and indoor air was also undertaken. Petroleum hydrocarbon vapor attenuation and biodegradation rates were not significantly reduced during low temperature winter months and there was no evidence for a significant capping effect of snow or frost cover that would limit oxygen ingress from the atmosphere. In the residual light nonaqueous phase liquid (LNAPL) source area adjacent to the house, evidence for biodegradation included rapid attenuation of hydrocarbon vapor concentrations over a vertical interval of approximately 0.9 m, and a corresponding decrease in oxygen to less than 1.5% v/v. In comparison, hydrocarbon vapor concentrations above the dissolved plume and below the house were much lower and decreased sharply within a few tens of centimeters above the groundwater source. Corresponding oxygen concentrations in soil gas were at least 10% v/v. A reactive transport model (MIN3P‐DUSTY) was initially calibrated to data from vertical profiles at the site to obtain biodegradation rates, and then used to simulate the observed soil vapor distribution. The calibrated model indicated that soil vapor transport was dominated by diffusion and aerobic biodegradation, and that crawlspace pressures and soil gas advection had little influence on soil vapor concentrations.     

Effects of a Dual‐Pump Crude‐Oil Recovery System,Bemidji, Minnesota,USA

A crude‐oil spill occurred in 1979 when a pipeline burst near Bemidji, MN. In 1998, the pipeline company installed a dual‐pump recovery system designed to remove crude oil remaining in the subsurface at the site. The remediation from 1999 to 2003 resulted in removal of about 115,000 L of crude oil, representing between 36% and 41% of the volume of oil (280,000 to 316,000 L) estimated to be present in 1998. Effects of the 1999 to 2003 remediation on the dissolved plume were evaluated using measurements of oil thicknesses in wells plus measurements of dissolved oxygen in groundwater. Although the recovery system decreased oil thicknesses in the immediate vicinity of the remediation wells, average oil thicknesses measured in wells were largely unaffected. Dissolved‐oxygen measurements indicate that a secondary plume was caused by disposal of the pumped water in an upgradient infiltration gallery; this plume expanded rapidly immediately following the start of the remediation in 1999. The result was expansion of the anoxic zone of groundwater upgradient and beneath the existing natural attenuation plume. Oil‐phase recovery at this site was shown to be challenging, and considerable volumes of mobile and entrapped oil remain in the subsurface despite remediation efforts.     

Weathering of Oil in a Surficial Aquifer

The composition of crude oil in a surficial aquifer was determined in two locations at the Bemidji, MN, spill site. The abundances of 71 individual hydrocarbons varied within 16 locations sampled. Little depletion of these hydrocarbons (relative to the pipeline oil) occurred in the first 10 years after the spill, whereas losses of 25% to 85% of the total measured hydrocarbons occurred after 30 years. The C_6‐30 n‐alkanes, toluene, and o‐xylene were the most depleted hydrocarbons. Some hydrocarbons, such as the n‐C_10–24 cyclohexanes, tri‐ and tetra‐ methylbenzenes, acyclic isoprenoids, and naphthalenes were the least depleted. Benzene was detected at every sampling location 30 years after the spill. Degradation of the oil led to increases in the percent organic carbon and in the δ ¹³C of the oil. Another method of determining hydrocarbon loss was by normalizing the total measured hydrocarbon concentrations to that of the most conservative analytes. This method indicated that the total measured hydrocarbons were depleted by 47% to 77% and loss of the oil mass over 30 years was 18% to 31%. Differences in hydrocarbon depletion were related to the depth of the oil in the aquifer, local topography, amount of recharge reaching the oil, availability of electron acceptors, and the presence of less permeable soils above the oil. The results from this study indicate that once crude oil has been in the subsurface for a number of years there is no longer a “starting oil concentration” that can be used to understand processes that affect its fate and the transport of hydrocarbons in groundwater.     

Use of an Artificial Sweetener to Identify Sources of Groundwater Nitrate Contamination

The artificial sweetener acesulfame (ACE) is a potentially useful tracer of waste water contamination in groundwater. In this study, ACE concentrations were measured in waste water and impacted groundwater at 12 septic system sites in Ontario, Canada. All samples of septic tank effluent (n = 37) had ACE >6 µg/L, all samples of groundwater from the proximal plume zones (n = 93) had ACE >1 µg/L and, almost all samples from the distal plume zones had ACE >2 µg/L. Mean mass ratios of total inorganic nitrogen/ACE at the 12 sites ranged from 680 to 3500 for the tank and proximal plume samples. At five sites, decreasing ratio values in the distal zones indicated nitrogen attenuation. These ratios were applied to three aquifers in Canada that are nitrate‐stressed and an urban stream where septic systems are present nearby to estimate the amount of waste water nitrate contamination. At the three aquifer locations that are agricultural, low ACE values (<0.02‐0.15 µg/L) indicated that waste water contributed <15% of the nitrate in most samples. In groundwater discharging to the urban stream, much higher ACE values (0.2‐11 µg/L) indicated that waste water was the likely source of >50% of the nitrate in most samples. This study confirms that ACE is a powerful tracer and demonstrates its use as a diagnostic tool for establishing whether waste water is a significant contributor to groundwater contamination or not.     

Degradation of Six Selected Ultraviolet Filters in Aquifer Materials Under Various Redox Conditions

Laboratory biodegradation batch studies were performed to investigate the degradation behavior of six selected UV filters, namely benzophenone‐3 (BP‐3), 3‐(4‐methylbenzylidene) camphor (4‐MBC), Octyl 4‐methoxycinnamate (OMC), Octocrylene (OC), 2‐(3‐t‐butyl‐2‐hydroxy‐5‐methylphenyl)‐5‐chloro benzotriazole (UV‐326), and 2‐(2’‐hydroxy‐5’‐octylphenyl)‐benzotriazole (UV‐329) in an aquifer microcosm (groundwater and aquifer sediment mixture) under aerobic and anaerobic (nitrate, sulfate, and Fe(III) reducing) conditions within 77 d. The results from the biodegradation experiments showed that the six UV filters were degraded well in the aquifer materials under different redox conditions. Rapid biodegradation was observed for BP‐3 and OMC in the aquifer materials, with their half‐lives of 1.5‐8.8 d and 1.3‐5.2 d, respectively. In most cases, aerobic conditions were more favorable for the degradation of the UV filters in aquifer materials. Relatively slow degradation of 4‐MBC, UV‐326, and UV‐329 under anaerobic conditions was noted with their half‐lives ranging between 47 d and 126 d, indicating potential persistence in anaerobic aquifers. The results showed that redox conditions could have significant effects on biodegradation of the UV filters in aquifers.     

Rapid evolution of redox processes in a petroleum hydrocarbon-contaminated aquifer

Ground water chemistry data collected over a six-year period show that the distribution of contaminants and redox processes in a shallow petroleum hydrocarbon-contaminated aquifer has changed rapidly over time. Shortly after a gasoline release occurred in 1990, high concentrations of benzene were present near the contaminant source area. In this contaminated zone, dissolved oxygen in ground water was depleted, and by 1994 Fe(III) reduction and sulfate reduction were the predominant terminal electron accepting processes. Significantly, dissolved methane was below measurable levels in 1994, indicating the absence of significant methanogenesis. By 1996, however, depletion of solid-phase Fe(III)-oxyhydrox ides in aquifer sediments and depletion of dissolved sulfate in ground water resulted in the onset of methanogenesis. Between 1996 and 2000, water-chemistry data indicated that methanogenic metabolism became increasingly prevalent. Molecular analysis of 16S-rDNA extracted from sediments shows the presence of a more diverse methanogenic community inside as opposed to outside the plume core, and is consistent with water-chemistry data indicating a shift toward methanogenesis over time. This rapid evolution of redox processes reflects several factors including the large amounts of contaminants, relatively rapid ground water flow (approximately 0.3 m/day [approximately foot/day]), and low concentrations of microbially reducible Fe(III) oxyhydroxides ( approximately 1 micromol/g) initially present in aquifer sediments. These results illustrate that, under certain hydrologic conditions, redox conditions in petroleum hydrocarbon-contaminated aquifers can change rapidly in time and space, and that the availability of solid-phase Fe(III)-oxyhydroxides affects this rate of change.     

Biogeochemical evolution of a landfill leachate plume, Norman, Oklahoma

Leachate from municipal landfills can create groundwater contaminant plumes that may last for decades to centuries. The fate of reactive contaminants in leachate-affected aquifers depends on the sustainability of biogeochemical processes affecting contaminant transport. Temporal variations in the configuration of redox zones downgradient from the Norman Landfill were studied for more than a decade. The leachate plume contained elevated concentrations of nonvolatile dissolved organic carbon (NVDOC) (up to 300 mg/L), methane (16 mg/L), ammonium (650 mg/L as N), iron (23 mg/L), chloride (1030 mg/L), and bicarbonate (4270 mg/L). Chemical and isotopic investigations along a 2D plume transect revealed consumption of solid and aqueous electron acceptors in the aquifer, depleting the natural attenuation capacity. Despite the relative recalcitrance of NVDOC to biodegradation, the center of the plume was depleted in sulfate, which reduces the long-term oxidation capacity of the leachate-affected aquifer. Ammonium and methane were attenuated in the aquifer relative to chloride by different processes: ammonium transport was retarded mainly by physical interaction with aquifer solids, whereas the methane plume was truncated largely by oxidation. Studies near plume boundaries revealed temporal variability in constituent concentrations related in part to hydrologic changes at various time scales. The upper boundary of the plume was a particularly active location where redox reactions responded to recharge events and seasonal water-table fluctuations. Accurately describing the biogeochemical processes that affect the transport of contaminants in this landfill-leachate-affected aquifer required understanding the aquifer's geologic and hydrodynamic framework.     

Monitoring In Situ Biodegradation of MTBE Using Multiple Rounds of Compound‐Specific Stable Carbon Isotope Analysis

At a large industrial facility, methyl tert‐butyl ether (MTBE) was released to the subsurface and dispersed into the light, non‐aqueous phase liquids (LNAPL), in the first aquifer, with the LNAPL serving as a continuous source of MTBE in groundwater. Compound‐specific isotope analysis was conducted on both MTBE and tert‐butyl alcohol (TBA) in groundwater samples collected in 2008, 2011, and 2013 from wells located along and off the center line of the MTBE plume. The study demonstrated the onset and progress of biodegradation of MTBE between 2008 and 2013. The TBA observed in 2008 appears to be derived only in part from MTBE transformation while a significant portion of TBA might be contributed directly from LNAPL sources. In 2011 to 2013, the dominant source of TBA in the mid‐gradient plume was MTBE transformation. A contribution of an offsite LNAPL source, in particular to the down‐gradient area of the plume, is possible but could not be unequivocally confirmed. The time series provided direct evidence for MTBE biodegradation, but also a valuable insight on the sources of TBA.     

Attenuation of a Mixed Chromium and Chlorinated Etjeme Ground Wate Plume in Estuarine Influenced Glaciated Sediments

The natural attenuation behavior of a ground water contaminant plume containing chromium and chlorinated ethenes in glaciated sediments was assessed using traditional and nontraditional methods. The mixed waste is transported through and attenuated within an estuarine influenced ground water aquifer of spatially varying redox character and organic carbon content. Contaminant fate and speciation were assessed as a function of geochemical conditions. Total, speciation-based, and sequential chemical extraction analyses were performed to determine contaminant partitioning and the redox capacity of the aquifer. Chromium speciation and partitioning were correlated with the reductive capacity and redox conditions of the aquifer sediments spatially distributed within the aquifer. Reductive dechlorination and partitioning of chlorinated ethenes were correlated with the organic carbon content and redox conditions of the aquifer sediments. The data showed that sharp redox gradients existed within the aquifer. Active reduction and retardation of both chromium and chlorinated ethenes was exhibited. The aqueous hexavalent chromium concentrations decreased to near nondetect levels in the vicinity of the receptor, whereas degradation products of higher-order chlorinated ethenes increased as a fraction of the total chlorinated ethene concentrations along the length of the plume. The potential for competition for reducing power under specific cases within the aquifer was suggested by the data, highlighting the need to include contaminant interactions in natural attenuation assessments.     

Benzene Dynamics and Biodegradation in Alluvial Aquifers Affected by River Fluctuations

The spatial distribution and temporal dynamics of a benzene plume in an alluvial aquifer strongly affected by river fluctuations was studied. Benzene concentrations, aquifer geochemistry datasets, past river morphology, and benzene degradation rates estimated in situ using stable carbon isotope enrichment were analyzed in concert with aquifer heterogeneity and river fluctuations. Geochemistry data demonstrated that benzene biodegradation was on‐going under sulfate reducing conditions. Long‐term monitoring of hydraulic heads and characterization of the alluvial aquifer formed the basis of a detailed modeled image of aquifer heterogeneity. Hydraulic conductivity was found to strongly correlate with benzene degradation, indicating that low hydraulic conductivity areas are capable of sustaining benzene anaerobic biodegradation provided the electron acceptor (SO₄^2–) does not become rate limiting. Modeling results demonstrated that the groundwater flux direction is reversed on annual basis when the river level rises up to 2 m, thereby forcing the infiltration of oxygenated surface water into the aquifer. The mobilization state of metal trace elements such as Zn, Cd, and As present in the aquifer predominantly depended on the strong potential gradient within the plume. However, infiltration of oxygenated water was found to trigger a change from strongly reducing to oxic conditions near the river, causing mobilization of previously immobile metal species and vice versa. MNA appears to be an appropriate remediation strategy in this type of dynamic environment provided that aquifer characterization and targeted monitoring of redox conditions are adequate and electron acceptors remain available until concentrations of toxic compounds reduce to acceptable levels.     

Arsenic Remediation Field Study Using a Sulfate Reduction and Zero‐Valent Iron PRB

Toxic and carcinogenic effects of arsenic in drinking water continue to impact people throughout the world and arsenic remains common in groundwater at cleanup sites and in areas with natural sources. Advances in groundwater remediation are needed to attain the low concentrations that are protective of human health and the environment. In this article, we present the successful use of a permeable reactive barrier (PRB) utilizing sulfate reduction coupled with zero‐valent iron (ZVI) to remediate the leading edge of a dissolved arsenic plume in a wetland area near Tacoma, Washington. A commercially available product (EHC‐M®, Adventus Americas Inc., Freeport, Illinois) that contains ZVI, organic carbon substrate, and sulfate was injected into a reducing, low‐seepage‐velocity aquifer elevated in dissolved arsenic and iron from a nearby, slag‐containing landfill. Removal effectiveness was strongly correlated with sulfate concentration, and was coincident with temporary redox potential (Eh) reductions, consistent with arsenic removal by iron sulfide precipitation. The PRB demonstrates that induced sulfate reduction and ZVI are capable of attaining a regulatory limit of 5 µg/L total arsenic, capturing of 97% of the arsenic entering the PRB, and sustaining decreased arsenic concentrations for approximately 2 years, suggesting that the technology is appropriate for consideration at other sites with similar hydrogeochemical conditions. The results indicate the importance of delivery and longevity of minimum sulfate concentrations and of maintaining sufficient dissolved organic carbon and/or microscale ZVI to precipitate FeS, a precursor phase to arsenic‐bearing pyrite that may provide a stable, long‐term sink for arsenic.     

Spatiotemporal Variations in Microbial Communities in a Landfill Leachate Plume

We examined the spatiotemporal changes of microbial communities in relation to hydrochemistry variation over time and space in an aquifer polluted by landfill leachate (Banisveld, The Netherlands). Sampling in 1998, 1999, and 2004 at the same time of the year revealed that the center of the pollution plume was hydrochemically rather stable, but its upper fringe moved to the surface over time, especially at distances greater than 40 m away from the landfill. Complex and spatiotemporal heterogeneous bacterial and eukaryotic communities were resolved using denaturing gradient gel electrophoresis (DGGE) of 16S and 18S rRNA gene fragments. Large fluctuations were noted in the eukaryotic communities associated with strongly polluted and cleaner groundwater. The bacterial communities in strongly polluted samples were different from those in cleaner groundwater in 1998 and 1999, but no longer in 2004. The temporal variation in microbial communities was greater than the spatial variation: the 1998 bacteria communities in strongly polluted groundwater were more related to each other than to those recovered in 1999 and 2004. During the three sampling periods, the bacterial communities were more stable close to the landfill than at larger distances from the landfill. Overall, pollution appears to have only a minor influence on microbial communities. The considerable spatiotemporal variation in microbial community composition may contribute to better biodegradation of pollutants. Designing management strategies for natural attenuation of aquifer pollution will benefit from further long‐term, high‐density monitoring of changes in microbial communities, their diversity and physiological properties, in relation to changes in hydrochemistry.     

Tidal influence on BTEX biodegradation in sandy coastal aquifers

A numerical study was conducted to investigate the influence of tides on the fate of terrestrially derived BTEX discharging through an unconfined aquifer to coastal waters. Previous studies have revealed that tide-induced seawater circulations create an active salt–freshwater mixing zone in the near-shore aquifer and alter the specific subsurface pathway for contaminants discharging to the coastal environment. Here the coupled density-dependent flow and multi-species reactive transport code PHWAT was used to examine the impact of these tidal effects on the aerobic biodegradation of BTEX released in a coastal aquifer and its subsequent loading to coastal waters. Simulations indicated that tides significantly enhance BTEX attenuation in the near-shore aquifer. They also reduce the rate of chemical transfer from the aquifer to the ocean and exit concentrations at the beach face. For the base case consisting of toluene transport and biodegradation, 79% of toluene initially released in the aquifer was attenuated prior to discharge with tides present, compared to only 1.8% for the non-tidal case. The magnitude of tidal forcing relative to the fresh groundwater flow rate was shown to influence significantly the extent of biodegradation as it controls the intensity of salt–freshwater mixing, period of exposure of the contaminant to the mixing zone and rate of oxygen delivery to the aquifer. The oxygen available for biodegradation also depends on the rate at which oxygen is consumed by natural processes such as organic matter decomposition. While simulations conducted with heterogeneous conductivity fields highlighted the uncertainties associated with predicting contaminant loadings, the study revealed overall that BTEX may undergo significant attenuation in tidally influenced aquifers prior to discharge.     

Biodegradation of petroleum products in experimental plots in Antarctic marine sediments is location dependent

Clean sediment collected from O'Brien Bay, East Antarctica, was artificially contaminated with a mix of Special Antarctic Blend diesel fuel and lubricating oil and deployed in two uncontaminated locations (O'Brien and Sparkes Bays) and a previously contaminated bay (Brown Bay) to evaluate whether a history of prior contamination would influence the biodegradation process. Detailed analysis of the hydrocarbon composition in the sediment after 11 weeks revealed different patterns of degradation in each bay. Biodegradation indices showed that hydrocarbon biodegradation occurred in all three bays but was most extensive in Brown Bay. This study shows that even within a relatively small geographical area, the longevity of hydrocarbons in Antarctic marine sediments can be variable. Our results are consistent with faster natural attenuation of spilt oil at sites with previous exposure to oil but further work is needed to confirm this. Such information would be useful when evaluating the true risk and longevity of oils spills.