Oceanography in northwestern Europe during the last interglacial from intrashell δO ranges in Littorina littorea gastropods

Coastal sea-surface temperature (SST) and sea-surface salinity (SSS), including seasonality, in northwest (NW) Europe during the early phase of the Eemian interglacial ca. 125 ka ago were reconstructed from Littorina littorea (common periwinkle) gastropods. The results were based on intra-annual δ¹⁸O analyses in recent and fossil shells, mainly originating from the sea of Kattegat (Sweden) and the English Channel (United Kingdom), and confined to intertidal settings. The Eemian L. littorea shells indicated annual SSTs in the range 8–18°C for the English Channel and 8–26°C for Kattegat. All specimens from the Eemian sites experienced summer SSTs of ca. 1–3°C above recent conditions. The estimated winter SST in the English Channel during the Eemian was comparable to modern measurements of ca. 8°C. However, the Kattegat region displayed Eemian winter SST approximately 8°C warmer than today, and similar to conditions in the western English Channel. The recent-fossil isotope analogue approach indicated high SSS above 35 practical salinity units (psu) for a channel south of England in full contact with the North Atlantic Ocean during the last interglacial. In addition, the Kattegat shells indicated a SSS of ca. 29 psu, which points out a North Sea affinity for this region during the Eemian.     

Upwelling signals in radiocarbon from early 20th-century Peruvian bay scallop (Argopecten purpuratus) shells

We quantified Δ¹⁴C, δ¹⁸O, and δ¹³C cycles along ontogeny within four bay scallop (Argopecten purpuratus) shells collected from Callao Bay, Salaverry, and Sechura Bay, Peru following the 1907–1908 non-El Niño years and the 1925–1926 El Niño. Δ¹⁴C and δ¹³C generally covary; Δ¹⁴C and δ¹⁸O vary inversely. Simultaneous decreases in Δ¹⁴C and increases in δ¹⁸O in non-El Niño shells are followed by constant Δ¹⁴C and gradually decreasing δ¹⁸O, which we interpret as evidence for discrete marine upwelling events followed by warming of the initially cold upwelled water. Upwelling changes from El Niño events are detectable with difficulty in mollusk shell Δ¹⁴C.     

Taxonomy, facies relationships and palaeobiology of bakevelliid bivalves from the Lower Cretaceous of west-central Argentina

Cretaceous bakevelliids in Argentina are restricted to the Lower Cretaceous. They are recorded in shallow marine deposits in two Mesozoic basins located in the Andes foothills in Patagonia. In the Austral Basin (44°–55°S) there is only one genus, Gervillella, represented by a single specimen from the Barremian. In the Neuquén Basin (30°–40°S) two genera, Gervillaria and Gervillella, occur, ranging from the Berriasian to the Lower Barremian. In the Pilmatué Member of the Agrio Formation two species are identified: Gervillaria alatior (Imlay) and Gervillella aviculoides (J. Sowerby). The former is also recorded in Mexico while the latter is more widespread, occurring in Europe, Asia, and Africa. In the Bajada del Agrio section they come from eight tabular shell beds located near and on top of shallowing-upwards cycles. They were abundant only in four of these levels. These shell beds are interpreted as having been deposited in the mid-ramp (middle of cycles), and upper mid-ramp (top of cycles). A functional analysis of shells revealed two life habits: epibyssate and endobyssate.     

Preservation of the shell matrix protein dermatopontin in 1500 year old land snail fossils from the Bonin islands

Organic molecules such as proteins can be preserved in certain fossils. The bulk properties of fossil proteins of both vertebrates and invertebrates have been studied for over half a century. Named proteins have so far been identified, however, only in vertebrate fossils, such as collagen from mammoth bones. Using immunological assays, we examined 1500 year old fossils of the extinct land snail Mandarina luhuana from the Bonin islands for the presence of dermatopontin, a molluscan shell matrix protein. First, we examined the shell microstructure and mineralogy of the fossil shells using scanning electron microscopy (SEM) and powder X-ray diffraction (XRD) in order to estimate the extent of diagenetic alteration. The results suggest that the original microstructure and mineralogy of the shells are preserved. Antiserum raised against the Type-1 dermatopontin fragment of the living land snail Euhadra brandtii showed significant immunological reactivity with the extracts from the fossil shells of M. luhuana. Immunological binding curves drawn for the shell extracts of extant M. aureola and the extinct M. luhuana confirmed the presence of dermatopontin in the fossil shells and provided an estimate that about 75–98% of the original dermatopontin was lost from the M. luhuana fossils. This is the first report of a named protein being identified in invertebrate fossils.     

Observations of the electrical asthenosphere beneath Scandinavia

The recent recognition that long period (i.e., of the order of hours) electromagnetic induction studies could play a major role in the detection of the asthenosphere has led to much interest amongst the geophysical and geological communities of the geomagnetic response functions derived for differing tectonic environments. Experiments carried out on the ocean bottom have met with considerable success in delineating the “electrical asthenosphere”, i.e., a local maximum in electrical conductivity (minimum in electrical resistivity) in the upper mantle.In this paper, observations of the time-varying magnetic field recorded in three regions of Scandinavia, northern Sweden (Kiruna—KIR), northern Finland/northeastern Norway (Kevo—KEV) and southern Finland (Sauvamaki—SAU), are analysed in order to obtain estimates of the inductive response function, C(ω), for each region. The estimated response functions are compared with one from the centre of the East European Platform (EEP), and it is shown that the induced eddy currents, at periods of the order of 10³–10⁴ s, in the three regions flow much closer to the surface than under the platform centre. Specifically, at a period of ~3000 s, these currents are flowing at depths of the order of: KEV—120 km; KIR—180 km; SAU—210 km; EEP—280 km; implying that the transition to a conducting zone, of σ -0.2 S/m, occurs at around these depths. One-dimensional inversion of and shows that there must exist a good conducting zone, of σ = 0.1–1.0 S/m, under each of the two regions, of 40 km minimum thickness, at depths of: KEV 105–115 km; KIR 160–185 km. This is to be contrasted with EEP, where the ρ-d profile displays a monotonically decreasing resistivity with depth, reaching σ~0.1 S/m at > 300 km.Finally, a possible temperature range for the asthenosphere, consistent with the deduced conducvitity, is discussed. It is shown that, at present, there is insufficient knowledge of the conditions (water content, melt fraction, etc.) likely to prevail in the asthenosphere to narrow down the probable range of 900°–1500°C.     

Metamorphic path constrained by metapelitic rocks from the inner Aiuruoca-Andrelândia nappe, south of the São Francisco craton, SE Brazil

A Nappe system south to southwest of the São Francisco Craton represents the southern extension of the Brasília belt and describes an inverted metamorphic pile of greenschist facies toward amphibolite facies. The Aiuruoca-Andrelândia nappe is one of the nappes of this system. The hind portion of the Aiuruoca-Andrelândia nappe, south of Caxambu and Aiuruoca (MG), consists of a structural-metamorphic domain transported toward the E-NE. There is a metamorphic transition, from the kyanite zone to kyanite and sillimanite coexistence, until the sillimanite zone. Metapelitic rocks preserve high-pressure parageneses (Rt–Ky–Grt–Ms–Bt–Pl–Qtz) and contain retrograde eclogitic rocks. Sil–Pl–Qtz coronitic intergrowths around garnets are common decompressive textures. Kyanite schists register the P_max of 11 kbar at 660 °C and define a decompressive path until 6–7.5 kbar at 650 °C. These P–T conditions represent the equilibrium in S₂ schistosity (amphibolite facies) and the beginning of the cooling path in the Ky–Sil transition. The decompressive path suggests an extrusional process, immediately after burying at about 60 km. Exhumation controlled by convergent events, related to the São Francisco Plate subduction and tectonic erosion, took these units, isothermally, to higher levels (20–33 km). Later, the metamorphic path shifted toward near-isobaric cooling.     

Poly-orogenic multi-stage metamorphic evolution inferred via P–T pseudosections: An example from Aspromonte Massif basement rocks (Southern Calabria, Italy)

The metamorphic evolution of a key sector of the western Mediterranean internal Alpine orogenic belt (southern Calabrian Peloritani Orogen) is identified and described by means of P–T pseudosections calculated for selected metapelite specimens, showing evidence of multi-stage metamorphism.Attention focused on the two lowermost basement nappes of the Aspromonte Massif (southern Calabria), which were differently affected by poly-orogenic multi-stage evolution. After a complete Variscan orogenic cycle, the upper unit (Aspromonte Peloritani Unit) was involved in a late-Alpine shearing event. In contrast, the several underlying metapelite slices, here grouped together as Lower Metapelite Group, show exclusive evidence of a complete Alpine orogenic cycle.In order to obtain reliable P–T constraints, an integrated approach was employed, based on: a) garnet isopleth thermobarometry; and b) theoretical predictions of the P–T stability fields of representative equilibrium assemblages. This approach, which takes into account the role of the local equilibrium volumes in controlling textural developments, yielded reliable information about P–T conditions from early to peak metamorphic stages, as well as estimates of the retrograde trajectory in the pseudosection P–T space.According to inferred detailed P–T paths, the evolution of the Aspromonte Peloritani Unit is characterised by a multi-stage Variscan cycle, subdivided into an early crustal thickening stage with P–T conditions ranging from 0.56 ± 0.05 GPa at 570 ± 10 °C to 0.63–0.93 GPa at 650–710 °C (peak conditions) and evolving to a later crustal thinning episode in lower P–T conditions (0.25 GPa at 540 °C), as documented by the retrograde trajectory.Conversely, the prograde evolution of the rocks of the Lower Metapelite Group shows evidence of a HP-LT early Alpine multi-stage cycle, with P–T evolving from 0.75–0.90 GPa at 510–530 °C towards peak conditions, with pressure increasing northwards from 1.12 ± 0.02 GPa to 1.24 ± 0.02 GPa, and temperatures of 540–570 °C.A late-Alpine mylonitic overprint affected the rocks of both the Aspromonte Peloritani Unit and the Lower Metapelite Group. This overprint was characterised by an initial retrograde decompression trajectory (0.75 ± 0.05 GPa at 570–600 °C), followed by a joint cooling history, ranging from 0.38 ± 0.14 at temperature from 450 to 520 °C.These inferred results were then used: a) to interpret the Lower Metapelite Group as a single crystalline basement unit exclusively affected by a complete Alpine orogenic cycle, according to the very similar features of P–T paths, comparable petrography and analogous structural characteristics; b) as a tool for more reliable correlations between the Aspromonte Massif, the other Calabrian terranes and the north African Orogenic Complexes. They may therefore consider a contribution to the geodynamic modelling of the western Mediterranean.     

Petrology and thermobarometry of mafic granulites and migmatites from the Chafalote Metamorphic Suite: New insights into the Neoproterozoic P–T evolution of the Uruguayan—Sul-Rio-Grandense shield

This paper reports a study of the metamorphic evolution of pelitic, semi-pelitic migmatites and mafic granulites of the Chafalote Metamorphic Suite (CMS), Uruguay, which represents the southernmost exposures of high-grade metamorphic rocks in the Dom Feliciano Belt, Uruguain—Sul-Rio-Grandense shield, South America. This belt is one of the Brasiliano orogens that crop out along the Brazilian and Uruguayan Atlantic margin, and the CMS is one of several disconnected segments of supracrustal rock in a dominantly granitic terrain. Petrological evidence from CMS mafic granulites and semi-pelitic migmatites indicates four distinct metamorphic assemblages. The early prograde assemblage (M₁) is preserved only as inclusions in porphyroblasts of the peak-metamorphic (M₂) assemblage. Peak-metamorphism was followed by near-isothermal decompression (M₃), which resulted in symplectites and coronitic textures in the mafic granulites and compositional zoning of Ca in garnet (decreasing rimwards) and plagioclase (increasing rimwards) in the semi-pelitic migmatites. The retrograde metamorphic assemblage (M₄) is represented by hydration reaction textures replacing minerals of the M₂ and M₃ assemblages. Average P–T calculations using the program THERMOCALC and conventional thermobarometric methods yield peak-metamorphic (M₂) P–T conditions of 7–10 kbar and 830–950 °C, near-decompressional (M₃) P–T conditions of 4.8–5.5 kbar and 788–830 °C and M₄ retrograde P–T conditions of 3–6 kbar and 600–750 °C. The calculated P–T path for the CMS rocks is ‘clockwise’ and incorporates a near-isothermal decompression segment followed by minor cooling, consistent with a history of crustal thickening followed by extensional collapse at ca. 650–600 Ma. The metamorphism recorded by rocks of this crustal segment may be correlated with 650 Ma metamorphism in the Coastal Terrane of the Kaoko Belt in Namibia, being the first unequivocal match between South America and Africa provided by crystalline rocks south of the Congo Craton.     

Process-response analysis for Hörnum tidal inlet in the German sector of the Wadden Sea

The Hörnum tidal inlet is located in the German sector of the Wadden Sea between the barrier islands Sylt and Amrum. On the basis of seven bathymetric surveys of the tidal inlet covering a 55-yr period from 1939 to 1994 and long-term records from two tide gauges, a process-response analysis for the inlet was carried out. Following the method described by Dean and Walton (1975), the volume of sediment stored in the ebb–tidal delta (V_ebd) was calculated for each survey. Furthermore, the cross-sectional area of the tidal inlet throat (A_c), and the area-height distribution (hypsographic curve) of the study area were established. Between 1939 and 1994, A_c increased by about 32%, whereas V_ebd diminished by about 18%. Earlier investigations by, e.g., O'Brien (1931), Walton and Adams (1976), Dean (1988), and Eysink and Biegel (1992) documented a strong positive correlation between these two morphological parameters and tidal currents in the inlet. In conformity with the literature, regression of the values of A_c with the corresponding fall velocities of the water level in the inlet (a direct indication of ebb–tidal currents) produced a correlation coefficient (r) of 0.87. However, V_ebd shows a weak negative correlation (r=−0.74) with fall velocities of the water level. Apparently, other factors than changes in ebb–tidal currents must have been responsible for the decrease in V_ebd. It is suggested that one factor might be the observed considerable increase in storminess, i.e. wave action, in the region since approximately 1960. Consequently, storm wave action on the ebb–tidal delta intensified and erosion was here initiated. As a result, the swash bars of the ebb–tidal delta, in particular, suffered from severe erosion between 1959 and 1994. As the ebb–tidal currents increased simultaneously, sand supply to the terminal lobe of the ebb–tidal delta increased as well, thereby balancing the loss of sediment from the terminal lobe caused by the increasing storminess. The results of this case study indicate that the ratio of ebb–tidal currents to (storm) wave action determines, in large part, the value of V_ebd.     

Metamorphic evolution of the Maud Belt: P–T–t path for high-grade gneisses in Gjelsvikfjella, Dronning Maud Land, East Antarctica

A metamorphic petrological study, in conjunction with recent precise geochronometric data, revealed a complex P–T–t path for high-grade gneisses in a hitherto poorly understood sector of the Mesoproterozoic Maud Belt in East Antarctica. The Maud Belt is an extensive high-grade, polydeformed, metamorphic belt, which records two significant tectono-thermal episodes, once towards the end of the Mesoproterozoic and again towards the late Neoproterozoic/Cambrian. In contrast to previous models, most of the metamorphic mineral assemblages are related to a Pan-African tectono-thermal overprint, with only very few relics of late Mesoproterozoic granulite-facies mineral assemblages (M₁) left in strain-protected domains. Petrological and mineral chemical evidence indicates a clockwise P–T–t path for the Pan-African orogeny. Peak metamorphic (M_2b) conditions recorded by most rocks in the area (T = 709–785 °C and P = 7.0–9.5 kbar) during the Pan-African orogeny were attained subsequent to decompression from probably eclogite-facies metamorphic conditions (M_2a).The new data acquired in this study, together with recent geochronological and geochemical data, permit the development of a geodynamic model for the Maud Belt that involves volcanic arc formation during the late Mesoproterozoic followed by extension at 1100 Ma and subsequent high-grade tectono-thermal reworking once during continent–continent collision at the end of the Mesoproterozoic (M₁; 1090–1030 Ma) and again during the Pan-African orogeny (M_2a, M_2b) between 565 and 530 Ma. Post-peak metamorphic K-metasomatism under amphibolite-facies conditions (M_2c) followed and is ascribed to post-orogenic bimodal magmatism between 500 and 480 Ma.     

Neoproterozoic subductions and differential exhumation of western Hoggar (southwest Algeria): new structural, petrological and geochronological evidence

The western terranes exposed east of the Pan-African suture in western Hoggar (southwest Algeria), are reexamined in the light of new structural, petrologic and by the ⁴⁰Ar/³⁹Ar laser probe data on metamorphic micas and amphiboles. To the north, the Tassendjanet nappe includes the Paleoproterozoic basement, its Mesoproterozoic cover and mafic rocks representing the roots of a ca. 680 Ma arc overlain by Late Neoproterozoic andesites and volcanic greywackes. The nappe preserved at rather shallow crustal level in the east was emplaced southward (D_1a) to southeastward (D₂). In the south, two metamorphic suites are distinguished. The Tideridjaouine–Tileouine high-pressure metamorphic belt (T=550–600 °C, P=1.4–1.8 GPa) represents a slab of subducted continental material exposed along the western edge of the In Ouzzal granulite unit interpreted as a microcontinent. Differential exhumation of tectonic slices from the high-pressure belt occurred around 615–600 Ma through a system of west-directed recumbent folds (D_1b). The Egatalis high grade belt in the west was intruded by syn-metamorphic gabbro–norite bodies. It includes unretrogressed low-pressure granulite facies rocks (T around 750–800 °C, P0.45 GPa) cooled at a rate of 15°/m.y. between 600 and 580 Ma, and followed by the emplacement of several late-kinematic granitic plutons. Final exhumation of the low-pressure, high-temperature metamorphic rocks, that are not found as pebbles in the molasse, took place in the Late Cambrian. The early and relatively fast cooling of the high-pressure and high-temperature metamorphic rocks of the southern part of the Tassendjanet terrane is at variance with the slow cooling of central Hoggar where repeated magmatic activity as young as Late Cambrian occurred [Lithos 45 (1998) 245].     

Identification of Cu and Ni indicator plants from mineralised locations in Botswana

Plant species that accumulate high levels of metals in proportion to the metal content in the soil are of considerable interest in biogeochemical and biogeobotanical prospecting. This study was aimed at investigating copper and nickel accumulation in the plants Helichrysum candolleanum and Blepharis diversispina, to assess their potential use as mineral indicators in biogeochemical prospecting. Soils and plants were collected from copper–nickel mineralised areas in Botswana. Analyses of the soils and the respective plant parts (roots, stem, leaves and flowers) were carried out using ultrasonic slurry sampling electrothermal atomic absorption spectrometry (ETAAS), which allowed rapid determination of copper and nickel in small amounts of the samples.The metal concentration in the soil was in the range ≈ 40 μg/g–4% (w/w) for Cu and ≈ 60 μg/g–0.3% (w/w) for Ni. The concentration ranges of the elements in the plant parts were ≈ 6 μg/g–0.2% Cu and ≈ 3–210 μg/g Ni. At high soil metal content (greater than 2.5% (w/w) Cu and 0.1% (w/w) Ni), high levels of both nickel and copper were found in the shoots (leaves and flowers) of H. candolleanum. Concentrations as high as 0.2% (w/w) Cu were found in the leaves and flowers of H. candolleanum, indicating hyperaccumulation for this plant. For B. diversispina, the metal concentrations did not exceed 100 μg/g for any plant part, for both metals. Both plant species tolerate high concentrations of metals and should therefore be categorized as metallophytes. In order to evaluate metal translocation from the soil to the shoots, metal leaf transfer coefficients (ratio of metal concentration in the leaf to metal concentration in the soil) were calculated. Our data suggest that the two plant species have different metal uptake and transport mechanisms, which needs to be investigated further. The present work also suggests that H. candolleanum may be used as a copper/nickel indicator plant in biogeochemical or biogeobotanical prospecting.     

Fossil mollusc-faunas: Their bearing on the Holocene evolution of the Lower Central Plain of Bangkok (Thailand)

In this work, fossil molluscan assemblages are analyzed in order to reconstruct the evolution of the Northern Gulf of Thailand during the Holocene. The marine sediments (Bangkok Clay Formation) of the Lower Central Plain of Bangkok and the coastal plain of Phetchaburi were sampled at 16 localities, obtaining fossil shells and mangrove peat whose ¹⁴C ages range from 9000 to 2000 CYBP. A statistical treatment of abundance data returned four major groups, namely the Dendostrea rosacea association (intertidal mud), the Corbula fortisulcata–Mactra luzonica association (shallow infralittoral sandy mud), the Nuculana mauritiana–Timoclea scabra association (infralittoral sand spit) and the Timoclea scabra–Arcopagia pudica association (infralittoral mud). The data allowed both a stratigraphic correlation along two transects covering all of the Holocene basin and the creation of digitalized maps showing the presumable extension of the Thai paleogulf around the apex of Flandrian transgression event (about 5500 CYBP).     

Pan-African high pressure granulites from SE-Kenya: Petrological and geothermobarometric evidence for a polycyclic evolution in the Mozambique belt

Two different Pan-African tectono-metamorphic events are recognised in the Taita Hill Tsavo East National Park/Galana river area, SE-Kenya (Mozambique belt) based on petrographic and geothermobarometric evidence. Structurally, this area can be subdivided into four units: (1) the easternmost part of the basement along the Galana river is characterized by subhorizontal slightly to the west and east dipping foliation planes. Migmatic paragneisses with intercalated marbles, calcsilicates and metapelites and bands of amphibolites are the dominant rock type. (2) The western part of the Galana river within the Tsavo East National Park is a ca. 25 km wide shear zone with subvertical foliation planes. The eastern part shows similar rocks as observed in unit 1, while towards west, metasedimentary units become rare and the main rock types are tonalitic gneisses with intercalated amphibolites. (3) A 10 km wide zone (Sagala Hills zone) between the strike slip zone (unit 2) and the Taita Hills (unit 4) is developed. This zone is characterized by elongated and folded felsic migmatic amphibole and garnet bearing orthogneiss bodies with intercalated bands of mafic rocks. (4) The Taita Hills are a slightly to the N dipping nappe stack. The main rock type in the Taita Hills are amphibole–biotite–plagioclase–quartz ± garnet ± clinopyroxene ± scapolite bearing migmatic gneisses with mafic bands. In the southern part, metapelites, marbles and some amphibolites are common.Although the geological structures are different in units 1 and 2, the calculated PT conditions are similar with peak PT of 760–820 °C and 7.5–9.5 kbar. Temperatures in unit 3 (Sagalla Hills zone) and unit 4 (Taita Hills) are slightly higher ca. 760–840 °C, but pressure is significantly higher, ranging from 10 to 12 kbar. Sillimanite growth around kyanite, garnet zonation pattern, mineral reaction textures, and PT calculations constrain a “clock-wise” PT-path with near isobaric cooling following the peak of metamorphism. The different PT conditions, tectonic setting, and a different age of metamorphism are evidence that units 1 and 2 (Galana river) belong to a different tectono-metamorphic event than unit 3 (Sagala Hills zone) and 4 (Taita Hills). The major shear zone (unit 2) marks a tectonic suture dividing the two different tectono-metamorphic domains. It is also likely that it played an important role during exhumation of the granulite facies rocks from units 3 and 4.     

On the affinity of Chuaria–Tawuia complex: A multidisciplinary study

In this study, biometric and structural engineering tool have been used to examine a possible relationship within Chuaria–Tawuia complex and micro-FTIR (Fourier Transform Infrared Spectroscopy) analyses to understand the biological affinity of Chuaria circularis Walcott, collected from the Mesoproterozoic Suket Shales of the Vindhyan Supergroup and the Neoproterozoic Halkal Shales of the Bhima Group of peninsular India. Biometric analyses of well preserved carbonized specimens show wide variation in morphology and uni-modal distribution. We believe and demonstrate to a reasonable extent that C. circularis most likely was a part of Tawuia-like cylindrical body of algal origin. Specimens with notch/cleft and overlapping preservation, mostly recorded in the size range of 3–5 mm, are of special interest. Five different models proposed earlier on the life cycle of C. circularis are discussed. A new model, termed as ‘Hybrid model’ based on present multidisciplinary study assessing cylindrical and spherical shapes suggesting variable cell wall strength and algal affinity is proposed. This model discusses and demonstrates varied geometrical morphologies assumed by Chuaria and Tawuia, and also shows the inter-relationship of Chuaria–Tawuia complex.Structural engineering tool (thin walled pressure vessel theory) was applied to investigate the implications of possible geometrical shapes (sphere and cylinder), membrane (cell wall) stresses and ambient pressure environment on morphologically similar C. circularis and Tawuia. The results suggest that membrane stresses developed on the structures similar to Chuaria–Tawuia complex were directly proportional to radius and inversely proportional to the thickness in both cases. In case of hollow cylindrical structure, the membrane stresses in circumferential direction (hoop stress) are twice of the longitudinal direction indicating that rupture or fragmentation in the body of Tawuia would have occurred due to hoop stress. It appears that notches and discontinuities seen in some of the specimens of Chuaria may be related to rupture suggesting their possible location in 3D Chuaria.The micro-FTIR spectra of C. circularis are characterized by both aliphatic and aromatic absorption bands. The aliphaticity is indicated by prominent alkyl group bands between 2800–3000 and 1300–1500 cm⁻¹. The prominent absorption signals at 700–900 cm⁻¹ (peaking at 875 and 860 cm⁻¹) are due to aromatic CH out of plane deformation. A narrow, strong band is centred at 1540 cm⁻¹ which could be COOH band. The presence of strong aliphatic bands in FTIR spectra suggests that the biogeopolymer of C. circularis is of aliphatic nature. The wall chemistry indicates the presence of ‘algaenan’—a biopolymer of algae.     

The determination of trace elements in Fe–Mn oxide coatings on pebbles using LA-ICP-MS

Iron–manganese oxide coatings form on a wide range of geologic samples where they have the ability to adsorb elements and potentially act as a mineral exploration/environmental monitoring tool. In this study, Fe–Mn oxide coatings on stream pebbles were collected from streams in four study areas located across the province of Newfoundland and Labrador, Canada. The study locations were in areas of former copper mines (Tilt Cove and Betts Cove), carbonate geology (Robinsons River), and a metropolitan area (Rennies River). Collected pebbles underwent a simple sample preparation procedure and were then analyzed for a wide range of elements by LA-ICP-MS after optimization of the operating conditions. Water samples accompanied the pebbles, and these were analyzed for pH, dissolved oxygen, conductivity, and a large selection of elements by ICP-MS. Multivariate statistics, in the form of Principal Component Factor Analysis (PCFA) was performed on both data sets. Graphs of the factor scores from the PCFA produced groupings of the samples that were related to geologic/environmental inputs. The loading of variables in each factor was related to the adsorption of the element either to the MnO₂ or Fe₂O₃ phase with most elements except Cr and Cu displaying preferential adsorption to MnO₂. Elemental Fe–Mn oxide coating concentrations were a result of the element's affinity (chalcophile, lithophile, or siderophile), pH of the environment, stream water concentration, and amount of each oxide phase present. Even with these complications, LA-ICP-MS analysis of Fe–Mn oxides was able to identify areas of heavy metal pollution and locate geologic inputs.     

Vp/Vs ratio along the Vøring Margin, NE Atlantic, derived from OBS data: implications on lithology and stress field

A total of 13 regional Ocean Bottom Seismograph (OBS) profiles with an accumulated length of 2207 km acquired on the Vøring Margin, NE Atlantic have been travel time modelled with regards to S-waves. The V_p/V_s ratios are found to decrease with depth through the Tertiary layers, which is attributed to increased compaction and consolidation of the rocks. The V_p/V_s ratio in the intra-Campanian to mid-Campanian layer (1.75–1.8) in the central Vøring Basin is significantly lower than for the layers above and beneath, suggesting higher sand/shale ratio. This layer was confirmed by drilling to represent a layer of sandstone. This mid-Cretaceous ‘anomaly’ is also present in the northern Vøring Basin, as well as on the southern Lofoten Margin further north. The V_p/V_s ratio in the extrusive rocks on the Vøring Plateau is estimated to be 1.85, conformable with mafic (basaltic) rocks. Landward of the continent/ocean transition (COT), the V_p/V_s ratio in the layer beneath the volcanics is estimated to be 1.67–1.75. These low values suggest that this layer represents sedimentary rocks, and that the sand/shale ratio might be relatively high here. The V_p/V_s ratio in the crystalline basement is estimated to be 1.67–1.75 in the basin and on the landward part of the Vøring Plateau, indicating the presence of granitic/granodioritic continental crust. In the lower crust, the V_p/V_s ratio in the basin decreases uniformly from southwest to northeast, from 1.85–1.9 to 1.68–1.73, suggesting a gradual change from mafic (gabbroic) to felsic (granodioritic) lower crust. Significant (3–5%) azimuthal S-wave anisotropy is observed for several sedimentary layers, as well as in the lower crust. All these observations can be explained by invoking the presence of liquid-filled microcracks aligned vertically along the direction of the present day maximum compressive stress (NW–SE).     

Matrix micrite δC and δO reveals synsedimentary marine lithification in Upper Jurassic Ammonitico Rosso limestones (Betic Cordillera, SE Spain)

Matrix micrites are a commonly used carbonate archive for the reconstruction of past environmental parameters, but one that is submitted to known limitations. Main reasons for the often ambiguous value of many micrite-based isotope data sets are the unknown origin of the micrite components and their poorly resolved diagenetic history. Here we present carbon and oxygen-isotope data retrieved from Oxfordian to Tithonian Ammonitico Rosso nodular micrites sampled from three sections in the Betic Cordillera (Southern Spain). All three sections were correlated and sampled using a rigorous biostratigraphic framework. A noteworthy feature is that analyzed matrix micrites are more conservative in terms of their isotopic composition than other carbonate materials commonly considered to resist diagenetic alteration under favourable circumstances. Remarkably, this refers not only to δ¹³C ratios, which reflect the typical Late Jurassic global trend, but also to δ¹⁸O ratios that range around 0.3‰. The ¹⁸O-enriched oxygen-isotope ratios are considered to represent diagenetic stabilization of carbonate ooze under the influence of marine porewaters within the sediment–water interphase (i.e., the immature sedimentary section, usually submitted to biogenic activity). This interpretation agrees with the very early lithification of micrite nodules with cements precipitated from marine porewaters, enriched by the dissolution of aragonite skeletals (i.e., ammonite shells). According to the model proposed, low sedimentation rates as well as rapid early marine differential cementation, under the influence of currents and seawater pumping, affected the sediment–water interphase of epioceanic swells where deposition resulted in early lithified Ammonitico Rosso facies. The data obtained show that special care must be taken to prevent oversimplified interpretations of carbonate archives, particularly in the context of epioceanic settings.     

Neoarchaean high-grade metamorphism in the Central Zone of the Limpopo Belt (South Africa): Combined petrological and geochronological evidence from the Bulai pluton

The Bulai pluton represents a calc-alkaline magmatic complex of variable deformed charnockites, enderbites and granites, and contains xenoliths of highly deformed metamorphic country rocks. Petrological investigations show that these xenoliths underwent a high-grade metamorphic overprint at peak P–T conditions of 830–860 °C/8–9 kbar followed by a pressure–temperature decrease to 750 °C/5–6 kbar. This P–T path is inferred from the application of P–T pseudosections to six rock samples of distinct bulk composition: three metapelitic garnet–biotite–sillimanite–cordierite–plagioclase–(K-feldspar)–quartz gneisses, two charnoenderbitic garnet–orthopyroxene–biotite–K-feldspar–plagioclase–quartz gneisses and an enderbitic orthopyroxene–biotite–plagioclase–quartz gneiss. The petrological data show that the metapelitic and charnoenderbitic gneisses underwent uplift, cooling and deformation before they were intruded by the Bulai Granite. This relationship is supported by geochronological results obtained by in situ LA-ICP-MS age dating. U–Pb analyses of monazite enclosed in garnet of a charnoenderbite gneiss provide evidence for a high-grade structural-metamorphic–magmatic event at 2644 ± 8 Ma. This age is significantly older than an U–Pb zircon crystallisation age of 2612 ± 7 Ma previously obtained from the surrounding, late-tectonic Bulai Granite. The new dataset indicates that parts of the Limpopo's Central Zone were affected by a Neoarchaean high-grade metamorphic overprint, which was caused by magmatic heat transfer into the lower crust in a ‘dynamic regional contact metamorphic milieu’, which perhaps took place in a magmatic arc setting.