Delineation of contamination plume around oxidation sewage-ponds in Southwestern Nigeria

Integrated surface electrical resistivity and electromagnetic (EM) surveys were conducted in a hard-rock terrain of Southwestern Nigeria in the vicinity of active oxidation sewage treatment ponds. The aim was to detect soil contamination due to the spread of sewage effluent, locate possible leachate plumes and conductive lithologic layers, and access the risk of groundwater pollution in the vicinity of the sewage-ponds. Dipole–dipole resistivity profiling and very low frequency (VLF) data were acquired at 10-m intervals along five 200-m long east-west geophysical traverses. Resistivity sections obtained revealed four subsurface geologic layers comprised of lateritic clay, clayey sand/sand, weathered/fractured bedrock, and competent bedrock. A distinct low resistivity zone corresponding to the contamination plume (labeled B) was delineated from all the resistivity sections. This low zone extends into the weathered bedrock and possibly suggests contamination of this layer. The filtered real component of the processed VLF data detected three distinct anomaly zones that are representative of fractured zones filled with conductive fluids and/or lithologic boundaries that possibly serve as conduits for the movement of contaminated effluents. The results obtained from the two methods suggest possible contamination of the subsurface soil layers and groundwater in the vicinity of the sewage-ponds. The existence of this contaminated plume poses a serious threat to the ecosystem and health of the people living in the vicinity of the sewage-ponds.     

Hydrogeophysical approach for contamination assessment in NamSon landfill,Hanoi, Vietnam

Self potential (SP) and electrical resistivity tomography (ERT) methods are used together with the results of groundwater samples hydrogeochemical analysis to assess the impact of the water leak from the landfill garbage site at NamSon located in Northern Hanoi on causing pollution to the surrounding environment and affecting geological structure. Selected survey area covers an area of 180 × 300 m lying in the low land of the NamSon site with a slope ranging about 8 m in direction NW–SE. There are three geophysical measurements lines denoted as T1, T2 and T3. Processing 180 SP data points has allowed to draw maps of equipotential epoch in the two periods in 2015 and 2016. The maps show four zones of SP positive anomalies with maximum amplitudes of about +20 mV where the groundwater flow direction is downward and five zones of SP negative anomalies with minimum values in a range from ?180 to ?260 mV where the groundwater flow direction is upward. Resistivity values of the subsurface layers of soils and rocks have been aquired from 2D inverse model for measuring ERT in March 2015 and March 2016. The results of the ERT allowed to define the low resistivity in the range 15–20 Ωm related to leachate plume from NamSon landfill site. Results of the physico-chemical analysis of groundwater samples from the existing six boreholes show increases in concentration of the measured pollutant parameters indicating contamination of the groundwater as a result of solid waste leachate accumulation. This result is affirmative evidence for the survey results by geophysical technique. The rapid decrease in quality of groundwater over the last year is probably due to the influence of the leachate from the NamSon landfill site.     

Evaluation of landfill disposal boundary by means of electrical resistivity imaging

This paper deals with an employment of electrical resistivity imaging (ERI) for survey of leachate content on the waste disposal site in Northern Israel. The research consisted of conducting ten ERI lines and drilling investigation wells. Data simulation used a 2D EarthImager inversion program. Analysis of 2D ERI interpretation results shows that determination of the boundary between the landfill body bottom intensively saturated with leachates and underlying layers of highly water saturated fat nonconsolidated clays presents a challenge. However, statistical analysis of ERI data indicates that standard deviation and confidence interval of a set of resistivity data measured in the landfill body are significantly larger than those in underlying clays. Moreover, maximum changes of these parameters are found on the boundary between landfill body and underlying soil, thus reflecting natural differences in scattering of resistivity data measured in these two objects.     

Hydrogeological studies on the mechanical behavior of landfill gases and leachate of the Nanjido Landfill in Seoul, Korea

 The Nanjido Landfill is the largest uncontrolled landfill in Korea and it causes various kinds of environmental problems. Landfill gases and leachate are recognized as the most serious environmental problems associated with the landfill. This study employs a series of numerical models and uses test data to interpret the distribution and flow of landfill gases and leachate. Leachate seepage appears about 40–60 m higher than the estimated basal groundwater table. Thus, seepage data indicate that perched or floating leachate layers are formed in the unsaturated zone of the landfill. The leachate production rate is estimated using infiltration test data and a model for unsaturated groundwater flow. Geochemical data indicate that the landfill leachate degrades the basal groundwater quality along the downgradient zone. The environmental impact of the leachate on river water is estimated. Received: 17 June 1996 · Accepted: 2 October 1996     

Apparent Formation Factor for Leachate-Saturated Waste and Sediments: Examples from the USA and China

The formation factor relates bulk resistivity to pore fluid resistivity in porous materials. Understanding the formation factor is essential in using electrical and electromagnetic methods to monitor leachate accumulations and movements both within and around landfills. Specifically, the formation factor allows leachate resistivity, the degree of saturation, and, possibly, even the hydraulic conductivity of the waste to be estimated from non-invasive surface measurements. In this study, apparent formation factors are computed for three landfills with different types of waste as well as sediments contaminated by landfill leachate. Resistivity soundings at the closed Mallard North landfill in suburban Chicago (Illinois, USA) mapped leachate surfaces that were confirmed by monitoring wells. The resistivity of leachate-saturated waste from resistivity sounding inversions was then divided by the leachate resistivity values measured in-situ to compute apparent formation factors (Fa) ranging from 1.6 to 4.9. A global Fa of 3.0±1.9 was computed for the entire monitored portion of this landfill At a nearby mixed laboratory waste landfill, a 2D inverted resistivity section was used to compute an Fa of 2.9. Finally, a distinctly different Fa value of 10.6±2.8 was computed for leachate-saturated retorted oil and organic compounds. The Fa for aquifers containing contaminated groundwater fall in the same range as aquifers with normal groundwater, 1.7-3.9. However, models from inverted sounding curves over these contaminated areas exhibit unusually low resistivity layers, which may be diagnostic of contamination.     

Electromagnetic methods to characterize the Savoia di Lucania waste dump (Southern Italy)

The aim of this work is the joint application and integration of non-invasive geoelectrical methods for studying the landfill of Savoia di Lucania (Southern Italy). This landfill for its engineering features and small dimensions (70 m × 30 m × 6 m) represents an optimal test site to assess a geophysical survey protocol for municipal solid waste landfills investigation and monitoring. The landfill of Savoia di Lucania has been built with a reinforced concrete material and coated with a high-density polyethylene (HDPE) liner. Three electrical resistivity tomographies (ERT), two self-potential (SP) map surveys and one induced polarization (IP) section have been performed, both in the surrounding area and inside the waste landfill. The geophysical investigations have well defined some buried boundaries of the landfill basin and localized the leachate accumulation zones inside the dumpsite. Comparison of our results with other engineering and geological investigations could be the key for evaluating the integrity of the HDPE liner. Finally, the joint use of the ERT, IP and SP methods seems to be a promising tool for studying and designing new monitoring systems able to perform a time-lapse analysis of waste landfill geometry and integrity.     

Electrical resistivity surveys to delineate groundwater potential aquifers in Peddavanka watershed,Anantapur District,Andhra Pradesh,India

Vertical electrical resistivity soundings were conducted in order to delineate groundwater potential aquifers in Peddavanka watershed, which is a catchment of about 398 km² in Anantapur District, Andhra Pradesh, India. The main lithologic units in the watershed are quartzite, limestone, shale, and alluvium. Ninety-nine vertical electrical soundings were conducted using the Schlumberger configuration, covering the entire watershed. The data were interpreted with the help of master curves and auxiliary point charts. Interpretations of VES were used to generate a top layer apparent resistivity contour map and longitudinal conductance map. Isoresistivity contour maps were prepared and interpreted in terms of resistivity and thickness of various sub-surface layers using computer software (SURFER), and isocontour diagrams depicting the depth to bedrock were prepared. Resistivity results were correlated with the existing lithology. Based on the depth to bedrock, the thickness of the saturated layer and the resistivity of the second layer, a groundwater potential map has been prepared, in which good, moderate, and poor zones are classified. The study reveals that the weathered and fractured portions in shale and limestone that occur in the southernmost and central portions of the watershed area constitute the productive water-bearing zones categorized as good groundwater potential aquifers.     

Application of electrical imaging to leachate plume evolution studies under in-situ and model conditions

Electrical imaging (resistivity tomography) is increasingly used as a geophysical exploration technique in contaminated land research. The present work demonstrates the efficiency of electrical imaging in monitoring pollution plume evolution under both in-situ and model conditions. The in-situ campaign was done at an unlined landfill site situated in the city of Patras, Hellas. A partially saturated zone of alluvial fan deposits underlies the site, which retards leachate percolation to the underlying water table. Electrical imaging provided details of the internal structure of the waste tip, and confirmed the presence of a leachate plume beneath the base of the landfill. This field data component provided the constraints for the design of a generic model of contaminant infiltration into partially saturated sand. The aim was to study leachate plume evolution in a laboratory environment. For this purpose, a miniaturised resistivity tomography technique, developed at Cardiff University, was used to image the resistivity distribution before during and after contaminant infiltration. Comparison of resulting two-dimensional tomography with observed plume geometry at the end of the test showed the miniaturised electrical imaging technique to be highly effective. Experiment showed that contaminant evolution taking place in the model was gravity-driven, with capillary water in the vadose zone being displaced by the denser contaminant solution.     

Assessment of the leachate movement in a sealed landfill using geophysical methods

This paper describes a case study concerning the use of integrated geophysical methods applied to environmental assessment. The study is focused on an old municipal solid waste sealed landfill site, located in Gaeiras, Central Portugal. The problem is related with leachate overproduction in this domestic and industrial waste landfill that became an environmental problem with urgent assessment, so that a solution could be planned. Due to the lack of accurate information regarding the shape, history and development of the landfill, the use of a set of classical geophysical methods was the option, since they are non-invasive and non-destructive. The available area was small, almost restricted to the landfill area. To conduct this assessment, electromagnetic RF-EM and Geonics EM34, spontaneous potential (SP), vertical electrical soundings (VES) and magnetic prospecting surveys were planned to understand the various problems that could be related with the leachate overproduction. The joint use of these classical geophysical methods was targeted to investigate bedrock depth and structure (RF-EM, EM34 and VES), waste and leachate characteristics (EM34 and magnetics) and groundwater flow (SP) in the landfill. Geophysical results were correlated with hydrogeological information, integrated and interpreted, using geographic information system tools. The results obtained were important to understand the geological mechanisms that are responsible for leachate overproduction and to suggest remedial measures.     

Geophysical imaging of municipal solid waste contaminant pathways

Surface electrical and electromagnetic surveys were conducted on top of a solid waste facility in Unguwan Dosa, Kaduna State, Northwest Nigeria. The aim of the geophysical survey was to detect vertical and subvertical fractures that may provide pathways for groundwater and contaminant transport. Results from the 2D electrical resistivity imaging showed vertical and subvertical contacts overlain by 6–10 m thick overburden. Quantitative interpretation of the VLF-EM data correlates well with the results of the 2D resistivity imaging delineating the vertical and subvertical contacts as good and weak conductors (fractures zones) with resistivity values of 40–220 and 300–420 Ω m, respectively. Azimuthal Schlumberger VES measurements yield apparent anisotropy values ranging from 1.01 to 1.47 for electrode spacings of 1–45 m with the highest value recorded at spacing of 2 m. However, azimuthal variations at large spacings (30–45 m) showed no fracture anisotropy due possibly to the array’s low sensitivity to anisotropy at these spacings. The result of the study showed that pollutants in the leachate can reach and contaminate the groundwater. Therefore, urgency for leachate treatment at this site is recommended to prevent contamination of groundwater.     

甘肃某生活垃圾填埋场地下水污染特征及污染途径分析

依据实际调查数据,采用单因子污染指数分析法确定了生活垃圾填埋场地下水中主要污染物、污染程度和污染范围,并进行了土壤和地下水污染耦合性分析,研究结果表明：该生活垃圾填埋场地下水污染物主要为氨氮、总氮、高锰酸盐、锰、挥发酚和氟化物,其污染指数最大值分别为1 407.24、745.00、137.12、97.50、3.60和1.68,污染区总面积0.168 km²;填埋场下游沟谷纵向上,总氮、锰两项指标在土壤中的含量与地下水中浓度变化趋势一致;其污染途径主要为库区防渗层破损,渗滤液垂向沿基岩风化裂隙进入地下含水层,以连续渗漏的方式不断污染地下水,污染物在地下水径流作用下向拦挡坝下游不断迁移。     

Geophysical Surveys over Karst Recharge Features,Illinois,USA

Karst aquifers supply a significant fraction of the world's drinking water. These types of aquifers are alsohighly susceptible to pollution from the surface with recharge usually occurring through fractures and solution openings at the bedrock surface. Thickness of the protective soil cover, macropores and openings within the soil cover, and the nature of the weathered bedrock surface all influence infiltration. Recharge openings at the bedrock surface, however, are often covered by unconsolidated sediments, resulting in the inadvertent placement of landfills, unregulated dump sites, tailing piles, waste lagoons and septic systems over recharge zones. In these settings surface geophysical surveys, calibrated by a few soil cores, could be employed to identify these recharge openings, and qualitatively assess the protection afforded by the soil cover. In a test of this hypothesis, geophysical measurements accurately predicted the thickness of unconsolidated deposits overlying karstic dolomite at a site ab     

Induced polarization,resistivity, and self-potential: a case history of contamination evaluation due to landfill leakage

This article compares the efficiency of induced polarization (IP) and resistivity in characterizing a contamination plume due to landfill leakage in a typical tropical environment. The resistivity survey revealed denser electrical current flow that induced lower resistivity values due to the high ionic content. The increased ionic concentration diminished the distance of the ionic charges close to the membrane, causing a decrease in the IP phenomena. In addition, the self-potential (SP) method was used to characterize the preferential flow direction of the area. The SP method proved to be effective at determining the flow direction; it is also fast and economical. In this study, the resistivity results were better correlated with the presence of contamination (lower resistivity) than the IP (lower chargeability) data.     

Electrical geophysical and hydrogeological investigations of groundwater aquifers in Ruseifa municipal landfill, Jordan

The effect of the Ruseifa municipal landfill on the shallow groundwater aquifers in the area was investigated in two separate sites. The first one was not used since 1994, whereas the other is still being used for dumping. Fourteen electrical resistivity soundings were performed to detect the leachate and its effect on the quality of the groundwater. Results indicated that the solid waste thickness of the landfill was ranged from 3 to 20 m with resistivity value less than 10 Ω m. Based on the resistivity decreases of values less than 5 Ω m, the leachate was detected in the landfill sites at depths ranged from 10 to 50 m. However, the flow direction of the leachate at depth ranging 10–20 m in the terminated site was toward north, whereas the flow direction of the leachate in the site still used for dumping was toward east–northeast which causes the major source of groundwater pollution.     

Application of integrated methods in mapping waste disposal areas

An integrated suite of environmental methods was used to characterize the hydrogeological, geological and tectonic regime of the largest waste disposal landfill of Crete Island, the Fodele municipal solid waste site (MSW), to determine the geometry of the landfill (depth and spatial extent of electrically conductive anomalies), to define the anisotropy caused by bedrock fabric fractures and to locate potential zones of electrically conductive contamination. A combination of geophysical methods and chemical analysis was implemented for the characterization and management of the landfill. Five different types of geophysical surveys were performed: (1) 2D electrical resistance tomography (ERT), (2) electromagnetic measurements using very low frequencies (VLF), (3) electromagnetic conductivity (EM31), (4) seismic refraction measurements (SR), and (5) ambient noise measurements (HVSR). The above geophysical methods were used with the aim of studying the subsurface properties of the landfill and to define the exact geometrical characteristics of the site under investigation.     

高密度电法在西岭雪山蓄水池稳定性探测中的应用

通过对待建西岭雪山蓄水池工区进行的浅层勘测,对工区覆盖层与基岩电性差异和裂隙异常特征研究,并与钻孔资料进行比对、校正.结果表明,工区范围内的覆盖层与基岩,以及裂隙与围岩存在明显电性差异.经过软件反演后的测线视电阻率异常特征和断面,清晰地反映出地下基岩起伏和裂隙地下延展分布、地下埋深情况,进而可圈定不良地质体规模,为待建...     

地球物理方法对垃圾填埋场探测的有效性试验研究

文中根据在河北省某市两处不同类型垃圾(建筑垃圾和生活垃圾)填埋场上采用多种地球物理方法(高密度电阻率法、探地雷达法、高精度磁测法、激发极化法和瞬变电磁法)进行试验研究所取得的实测资料,结合工作地区的地质和岩土物性特征,通过分析对比,指出了不同地球物理方法在圈定和监测垃圾填埋场的污染范围和扩散趋势等方面的作用和能力。实验证明,垃圾填埋场渗漏污染检测中,探地雷达法、高密度电阻率法、激发极化法和瞬变电磁法均有一定的效果。除高密度电阻率方法外,激发极化法在监测垃圾的污染范围和污染趋势、圈定污染程度方面,效果也很明显。     

Hydrogeophysical investigation and estimation of groundwater potentials of the Lower Palaeozoic to Precambrian crystalline basement rocks in Keffi area, north-central Nigeria, using resistivity methods

The use of resistivity sounding and two-dimensional (2-D) resistivity imaging was investigated with the aim of delineating and estimating the groundwater potential in Keffi area. Rock types identified are mainly gneisses and granites. Twenty-five resistivity soundings employing the Schlumberger electrode array were conducted across the area. Resistivity sounding data obtained were interpreted using partial curve matching approach and 1-D inversion algorithm, RESIST version 1.0. The 2-D resistivity imaging was also carried out along two traverses using dipole–dipole array, and the data obtained were subjected to finite element method modeling using DIPRO inversion algorithm to produce a two-dimensional subsurface geological model. Interpretation of results showed three to four geoelectrical layers. Layer thickness values were generally less than 2 m for collapsed zone, and ranged from 5 to 30 m for weathered bedrock (saprolite). Two major aquifer units, namely weathered bedrock (saprolite) aquifer and fractured bedrock (saprock) aquifer, have been delineated with the latter usually occurring beneath the former in most areas. Aquifer potentials in the area were estimated using simple schemes that involved the use of three geoelectrical parameters, namely: depth to fresh bedrock, weathered bedrock (saprolite) resistivity and fractured bedrock (saprock) resistivity. The assessment delineated the area into prospective high, medium and low groundwater potential zones.     

Vertical electrical sounding as an exploration technique to improve on the certainty of groundwater yield in the fractured crystalline basement aquifers of eastern Uganda

Groundwater in eastern Uganda mostly occurs in fractures in the crystalline basement rocks and at the interface between the overburden and bedrock. The study was aimed at improving the success rate of boreholes through the use of complimentary geophysical siting procedures in 16 locations in Kamuli District, eastern Uganda. Boreholes that were sited after applying appropriate geophysical techniques yielded adequate quantities of water, whereas those sited where such procedures were not applied were out of service sooner than expected. Techniques to determine the precise location of resistivity anomaly and vertical electrical sounding (VES) models were used to locate water-bearing zones. VESs were undertaken to provide an overview of the geology. The apparent resistivities of the water-bearing zones both from VES and resistivity profiling data, had a relationship with the success rates of the boreholes. Electrical resistivities were correlated with hydrogeological parameters. The majority of successful boreholes had, within water-bearing zones, minimum apparent resistivity values less than 200 and 100 Ohmm, from the resistivity profiling anomalies and VES, respectively. The depth to bedrock was generally greater than 20 m below ground level, which indicates potential for medium yielding boreholes.     

Geophysical survey to estimate the 3D sliding surface and the 4D evolution of the water pressure on part of a deep seated landslide

Geophysical surveys were conducted on the very unstable front part of the La Clapière landslide in the French Alps (Alpes Maritimes). The electrical resistivity survey was carried out to obtain, for the first time on this deep-seated landslide, 3D information on the slipping surface and the vertical drained faults. Moreover, we planned to follow within time (6 months) the evolution of the saturated zones (presence of gravitational water) and their percolation into the shearing zones. Our 4D results showed the importance of the complex water channelization within the slope and relation to geological discontinuities.