Thermal histories of Cretaceous basins in Korea: Implications for response of the East Asian continental margin to subduction of the Paleo‐Pacific Plate

Thermal histories of Cretaceous sedimentary basins in the Korean peninsula have been assessed to understand the response of the East Asian continental margin to subduction of the Paleo‐Pacific (Izanagi) Plate. The Izanagi Plate subducted obliquely beneath the East Asian continent during the Early Cretaceous and orthogonally in the Late Cretaceous. First, the Jinan Basin, a pull‐apart basin, was studied by illite crystallinity and apatite fission‐track analyses. Analytical results indicate that Jinan Basin sediment was heated to a maximum temperature of approximately 287°C by burial. The sediment experienced two cooling episodes during ca 95–80 Ma and after ca 30 Ma, with a quiescent period between them. A similar cooling pattern is recognized in the Gyeongsang Basin, the largest Cretaceous basin in Korea. The Jinan and Gyeongsang Basins were cooled mainly by exhumation between ca 95 and 80 Ma, but the former was exhumed slightly earlier than the latter by transpressional force due to the subduction direction change of the Izanagi Plate. Comparison of thermal history of Korean Cretaceous basins with those of granitoids in northeastern China and the accretionary complexes in southwestern Japan reveals that the Upper Cretaceous regional exhumation of the East Asian continental margin including the Korean peninsula during ca 95–80 Ma was facilitated by the subduction of the Izanagi–Pacific ridge, which migrated northeastwards with time, resulting in the end of regional exhumation at ca 80 Ma in this region.     

Cenozoic geodynamic evolution of the Andaman–Sumatra subduction margin: Current understanding

The Andaman–Sumatra margin displays a unique set‐up of extensional subduction–accretion complexes, which are the Java Trench, a tectonic (outer arc) prism, a sliver plate, a forearc, oceanic rises, inner‐arc volcanoes, and an extensional back‐arc with active spreading. Existing knowledge is reviewed in this paper, and some new data on the surface and subsurface signatures for operative geotectonics of this margin is analyzed. Subduction‐related deformation along the trench has been operating either continuously or intermittently since the Cretaceous. The oblique subduction has initiated strike–slip motion in the northern Sumatra–Andaman sector, and has formed a sliver plate between the subduction zone and a complex, right‐lateral fault system. The sliver fault, initiated in the Eocene, extended through the outer‐arc ridge offshore from Sumatra, and continued through the Andaman Sea connecting the Sagaing Fault in the north. Dominance of regional plate dynamics over simple subduction‐related accretionary processes led to the development and evolution of sedimentary basins of widely varied tectonic character along this margin. A number of north–south‐trending dismembered ophiolite slices of Cretaceous age, occurring at different structural levels with Eocene trench‐slope sediments, were uplifted and emplaced by a series of east‐dipping thrusts to shape the outer‐arc prism. North–south and east–west strike–slip faults controlled the subsidence, resulting in the development of a forearc basins and record Oligocene to Miocene–Pliocene sedimentation within mixed siliciclastic–carbonate systems. The opening of the Andaman Sea back‐arc occurred in two phases: an early (～11 Ma) stretching and rifting, followed by spreading since 4–5 Ma. The history of inner‐arc volcanic activity in the Andaman region extends to the early Miocene, and since the Miocene arc volcanism has been associated with an evolution from felsic to basaltic composition.     

The emplacement of in situ greenstones in the northern Hidaka belt: The tectonic relationship between subduction of the Izanagi–Pacific ridge and Hidaka magmatic activity

Greenstone bodies emplaced upon or into clastic sediments crop out ubiquitously in the Hidaka belt (early Paleogene accretionary and collisional complexes exposed in the central part of northern Hokkaido, NE Japan), but the timing and setting of their emplacement has remained poorly constrained. Here, we report new zircon U–Pb ages for the sedimentary complexes surrounding these greenstones. The Hidaka Supergroup in the northern Hidaka belt is divided into four zones from west to east: zones S, U, and R, which contain in situ greenstones; and zone Y, which does not. Detrital zircons in zones S, U, and R have early Eocene U–Pb ages (55–47 Ma) and these strata are intruded by early Eocene granites (46–45 Ma), indicating that they were deposited between 55 and 46 Ma. Therefore, in situ greenstones in the northern Hidaka belt can only be explained by the subduction of the Izanagi–Pacific Ridge during 55–47 Ma. In contrast, the deposition of zone Y (the Yubetsu Group, younging to the west) began by 73–71 Ma, indicating that the accretionary prism in front of the paleo-Kuril arc formed at the same time as that in the Idonnappu zone and grew continuously until 48 Ma. The plutonic rocks that intruded the Hidaka belt are roughly divided into three stages: (1) early Eocene granites intruded the northern Hidaka belt at 46–45 Ma, during subduction of the Izanagi–Pacific Ridge; (2) the upper sequence of the Hidaka metamorphic zone was metamorphosed by magmatism at 40–37 Ma associated with the collision of the paleo-Kuril arc and NE Asia; and (3) younger granites intruded the entire Hidaka belt at 20–17 Ma in association with asthenospheric upwelling caused by back-arc expansion.     

Oblique subduction, collision of microcontinents and subduction of oceanic ridge: Their implications on the Cretaceous tectonics of Japan

Abstract The Izanagi plate subducted rapidly and obliquely under the accretionary terrane of Japan in the Cretaceous before 85 Ma. A chain of microcontinents collided with it at about 140 Ma. In southwest Japan the major part of it subducted thereafter, but in northeast Japan it accreted and the trench jumped oceanward, resulting in a curved volcanic front. The oblique subduction and the underplated microcon-tinent caused uplifting of high-pressure (high-P) metamorphic rocks and large scale crustal shortening in southwest Japan. The oblique subduction caused left-lateral faulting and ductile shearing in northeast Japan. The arc sliver crossed over the high-temperature (high-T) zone of arc magmatism, resulting in a wide high-T metamorphosed belt. At about 85 Ma, the subduction mode changed from oblique to normal and the tectonic mode changed drastically. Just after this the Kula/Pacific ridge subducted and the subduction rate of the Pacific plate decreased gradually, causing the intrusion of huge amounts of granite magma and the eruption of acidic volcanics from large cauldrons. The oblique subduction of the Pacific plate resumed at 53 Ma and the left-lateral faults were reactivated.     

Tectonic reconstruction of batholith formation based on the spatiotemporal distribution of Cretaceous–Paleogene granitic rocks in southwestern Japan

The spatiotemporal distribution of Cretaceous–Paleogene granitic rocks in southwestern Japan is investigated to understand the origin of the granitic batholith belt and to reconstruct the tectonic setting of emplacement. New U–Pb zircon ages for 92 samples collected from a region measuring 50 km (E–W) by 200 km (N–S) reveals a stepwise northward younging of granitic rocks aged between 95 and 30 Ma with an age‐data gap between 60 and 48 Ma. Based on the spatiotemporal distribution of granite ages, we examine two plausible models to explain the pattern of magmatic activity: (i) subduction of a segmented spreading ridge and subsequent slab melting (ridge‐subduction model), and (ii) subduction with a temporally variable subduction angle and corresponding spatial distribution of normal arc magmatism (subduction angle model). We optimize the model parameters to fit the observed magmatism in time and space, and compare the best‐fit models. As to ridge subduction model, the best‐fit solution indicates that the spreading ridge started to subduct at approximately 100 Ma, and involved a 45‐km‐wide section of the ridge segment, a subduction obliquity of 30°, and a slow migration velocity (～1.6 cm/y) of the ridge. These values are within the ranges of velocities observed for present‐day ridge subduction at the Chile trench. On the other hand, the best‐fit solution of subduction angle model indicates that the subduction angle decreases stepwise from 37° at 95 Ma, 32° at 87 Ma, 22° at 72 Ma, to 20° at 65 Ma, shifting magmatic region towards the continental side. These results and comparison, together with constraints on the geometry of the tectonic setting provided by previous studies, suggest that the ridge subduction model better explains the limited duration of magmatism, although both models broadly fit the data and cannot be ruled out.     

Metamorphic and cooling history of the Shimanto accretionary complex,Kyushu, Southwest Japan: Implications for the timing of out‐of‐sequence thrusting

Illite crystallinity, K–Ar dating of illite, and fission‐track dating of zircon are analyzed in the hanging wall (Sampodake unit) and footwall (Mikado unit) of a seismogenic out‐of‐sequence thrust (Nobeoka thrust) within the Shimanto accretionary complex of central Kyushu, southwest Japan. The obtained metamorphic temperatures, and timing of metamorphism and cooling, reveal the tectono‐metamorphic evolution of the complex, and related development of the Nobeoka thrust. Illite crystallinity data indicate that the Late Cretaceous Sampodake unit was metamorphosed at temperatures of around 300 to 310°C, while the Middle Eocene Mikado unit was metamorphosed at 260 to 300°C. Illite K–Ar ages and zircon fission‐track ages constrain the timing of metamorphism of the Sampodake unit to the early Middle Eocene (46 to 50 Ma, mean = 48 Ma). Metamorphism of the Mikado unit occurred no earlier than 40 Ma, which is the youngest depositional age of the unit. The Nobeoka thrust is inferred to have been active during about 40 to 48 Ma, as the Sampodake unit started its post metamorphic cooling after 48 Ma and was thrust over the Mikado unit at about 40 Ma along the Nobeoka thrust. These results indicate that the Nobeoka thrust was active for more than 10 million years.     

Thermal consequences of the formation of a slab window beneath the Mid-Cretaceous southwest Japan arc: A 2-D numerical analysis

Abstract   The development of voluminous granitic magmatism and widespread high-grade metamorphism in Mid-Cretaceous southwest Japan have been explained by the subduction of a spreading ridge (Kula–Pacific or Farallon–Izanagi plate boundaries) beneath the Eurasian continent and the formation of a slab window. In the present study, the thermal consequences of the formation of a slab window beneath a continental margin are evaluated through a 2-D numerical simulation. The model results are evaluated by comparison with the Mid-Cretaceous geology of southwest Japan. Of particular interest are the absence of an amphibolite- to granulite-facies metamorphic belt near the Wadati–Benioff plane, and significant melting of the lower crustal-mafic rocks sufficient to form a large amount of granitic magma. Because none of the model results simultaneously satisfied these two geological interpretations, it is suggested that subduction of plate boundaries in Mid-Cretaceous southwest Japan was not associated with the opening of a slab window. According to previous studies, and the results of the present study, two different tectonic scenarios could reasonably explain the geological interpretations for Mid-Cretaceous southwest Japan: (i) The spreading ridge did not subduct beneath the Eurasian continent, but was located off the continental margin, implying the continuous subduction of very young oceanic lithosphere; (ii) ridge subduction beneath the continental margin occurred after active spreading had ceased. Consequently, in both tectonic scenarios, the subduction of plate boundaries at the Mid-Cretaceous southwest Japan was not associated with a slab window, but very young (hot) oceanic lithosphere.     

Timing of dextral oblique subduction along the eastern margin of the Asian continent in the Late Cretaceous: Evidence from the accretionary complex of the Shimanto Belt in the Kii Peninsula, Southwest Japan

Paleomagnetic studies and hotspot track analyses show that the Kula Plate was subducted dextrally with respect to the Eurasian Plate from the Coniacian to Campanian. However, geological evidence for dextral subduction of the Kula Plate has not been reported from Southwest Japan. Studies of the Coniacian to lower Campanian Miyama Formation of the Shimanto Belt reveal that the mélange fabrics show a dextral sense of shear both at outcrop and microscopic scales. In addition, thrust systems at map-scale also show dextral shearing. Restored shear directions in the mélange indicate dextral oblique subduction of an oceanic plate. This indicates that the Kula Plate subducted dextrally along the eastern margin of Asia during the Coniacian to early Campanian. Combinations with other published kinematic and age constraints suggest that Southwest Japan experienced a change from sinistral to dextral and back to sinistral shear between 89–76 Ma. This history is compatible with global-scale plate reconstructions and places good constraints on the timing of plate boundary interaction with the Cretaceous East Asian margin.     

Cretaceous episodic growth of the Japanese Islands

Abstract The Japanese Islands formed rapidly in situ along the eastern Asian continental margin in the Cretaceous due to both tectonic and magmatic processes. In the Early Cretaceous, huge oceanic plateaus created by the mid-Panthalassa super plume accreted with the continental margin. This tectonic interaction of oceanic plateau with continental crust is one of the significant tectonic processes responsible for continental growth in subduction zones. In the Japanese Islands, Late Cretaceous-Early Paleogene continental growth is much more episodic and drastic. At this time the continental margin uplifted regionally, and intra-continent collision tectonics took place in the northern part of the Asian continent. The uplifting event appears to have been caused by the subduction of very young oceanic crust (i.e. the Izanagi-Kula Plate) along the continental margin. Magmatism was also very active, and melting of the young oceanic slab appears to have resulted in ubiquitous plutons in the continental margin. Regional uplift of the continental margin and intra-continent collision tectonics promoted erosion of the uplifted area, and a large amount of terrigenous sediment was abruptly supplied to the trench. As a result of the rapid supply of terrigenous detritus, the accretionary complexes (the Hidaka Belt in Hokkaido and the Shimanto Belt in Southwest Japan) grew rapidly in the subduction zone. The rapid growth of the accretionary complexes and the subduction of very young, buoyant oceanic crust caused the extrusion of a high-P/T metamorphic wedge from the deep levels of the subduction zone. Episodic growth of the Late Cretaceous Japanese Islands suggests that subduction of very young oceanic crust and/or ridge subduction are very significant for the formation of new continental crust in subduction zones.     

A migration model of magmatism explaining a ridge subduction, and its details on a statistical analysis of the granite ages in Cretaceous Southwest Japan

A migration model of magmatism based on the granite ages in Southwest Japan is proposed to explain the ridge subduction beneath the Eurasia continent as the cause of the along-arc and across-arc youngings of the granite ages and the very high activity of the magmatism in the Cretaceous. For the construction of the magmatic model, the localities of the granite age samples are denoted by the cartesian coordinates X and Y, which are measured along and normal to the Median Tectonic Line (MTL), respectively, and their ages are set corresponding to the coordinate Z vertical to the X–Y plane. The age trend is then formulated by a regression plane of Z on X and Y, which inclines in both directions along and normal to the MTL, and approximates the ages with the very high multiple correlation coefficient 0.91. Evaluating the magmatic trend by such a method, various characteristics of the activities can be taken easily; for example, the isochronous line of the magmatism, which is an intersection of the regression plane and an arbitrary horizontal plane, is found to extend landward obliquely across the continental margin. The migrating rate of the isochronous line along the MTL is also taken to be 2.8 cm/year as a reciprocal of the inclination of the along-arc younging. The isochronous line is speculated to be the out-cropped manifestation of the subcrustal linear heat source. Such a migrating linear heat source is probably due to the subduction of an active ridge, the Kula (or Izanagi)–Pacific ridge in the Cretaceous. The migration model of magmatism harmonizes very well with the plates and the ridge motions in the East Asia area during the late Mesozoic. The ridge subduction is one of the important phenomena that explain the unusually active arc magmatism and the migrating slab window; it is important to grasp dynamically the geological messages issued from the system.     

Evidence for ∼80–75 Ma subduction jump during Anatolide–Tauride–Armenian block accretion and ∼48 Ma Arabia–Eurasia collision in Lesser Caucasus–East Anatolia

Orogens formed by a combination of subduction and accretion are featured by a short-lived collisional history. They preserve crustal geometries acquired prior to the collisional event. These geometries comprise obducted oceanic crust sequences that may propagate somewhat far away from the suture zone, preserved accretionary prism and subduction channel at the interplate boundary. The cessation of deformation is ascribed to rapid jump of the subduction zone at the passive margin rim of the opposite side of the accreted block. Geological investigation and ⁴⁰Ar/³⁹Ar dating on the main tectonic boundaries of the Anatolide–Tauride–Armenian (ATA) block in Eastern Turkey, Armenia and Georgia provide temporal constraints of subduction and accretion on both sides of this small continental block, and final collisional history of Eurasian and Arabian plates. On the northern side, ⁴⁰Ar/³⁹Ar ages give insights for the subduction and collage from the Middle to Upper Cretaceous (95–80 Ma). To the south, younger magmatic and metamorphic ages exhibit subduction of Neotethys and accretion of the Bitlis–Pütürge block during the Upper Cretaceous (74–71 Ma). These data are interpreted as a subduction jump from the northern to the southern boundary of the ATA continental block at 80–75 Ma. Similar back-arc type geochemistry of obducted ophiolites in the two subduction–accretion domains point to a similar intra-oceanic evolution prior to accretion, featured by slab steepening and roll-back as for the current Mediterranean domain. Final closure of Neotethys and initiation of collision with Arabian Plate occurred in the Middle-Upper Eocene as featured by the development of a Himalayan-type thrust sheet exhuming amphibolite facies rocks in its hanging-wall at c. 48 Ma.     

The origin of strata within the inner accretionary prism of Nankai Trough: Evidence from clay mineral assemblages along the NanTroSEIZE transect

One of the more prominent architectural elements of the Nankai subduction margin, offshore southwest Japan, is an out‐of‐sequence thrust fault (megasplay) that separates the inner accretionary prism from the outer prism. The inner prism (hanging wall of the megasplay) is dominated by mudstone, which is enigmatic when the sedimentary facies is compared to coeval deposits in the Shikoku Basin (i.e. inputs from the subducting Philippine Sea plate) and to coarser‐grained turbidite sequences from the Quaternary trench wedge. Clay mineral assemblages amplify the mismatches of sedimentary facies. Mudstones from the inner prism are uniformly depleted in smectite, with average bulk values of 23–24 wt%, whereas the Shikoku Basin deposits show progressive decreases in proportions of smectite over time, from averages of 46–48 wt% at 10 Ma to 17–21 wt% at 1 Ma. Plate‐boundary reconstructions for the Philippine Sea region provide one solution to the conundrum. Between 15 Ma and 10 Ma, the Pacific plate subducted near the NanTroSEIZE transect, and a trench‐trench‐trench triple junction migrated to the northeast. Accretion during that period involved sediments that had been deposited on the Pacific plate. Motion of the Philippine Sea plate changed from 10 Ma to 6 Ma, resulting in sinistral slip along the proto‐Nankai Trough. Sediments accreted during that period probably had been deposited near the triple junction, with a hybrid detrital provenance. Renewed subduction of the Philippine Sea plate at 6 Ma led to reorganization of watersheds near the Izu–Honshu collision zone and gradual incision of large submarine canyons on both sides of the colliding Izu arc. Accreted Pliocene mudstones share more of an affinity to the triple junction paleoenvironment than they do to Shikoku Basin. These differences between subducting Shikoku Basin strata and accreted Pacific plate sediments have important implications for interpretations of frictional properties, structural architecture, and diagenetic fluid production.     

Anatomy and genesis of a subduction-related orogen: A new view of geotectonic subdivision and evolution of the Japanese Islands

Abstract The Japanese Islands represent a segment of a 450 million year old subduction-related orogen developed along the western Pacific convergent margin. The geotectonic subdivision of the Japanese Islands is newly revised on the basis of recent progress in the 1980s utilizing microfossil and chronometric mapping methods for ancient accretionary complexes and their high-P/T metamorphic equivalents. This new subdivision is based on accretion tectonics, and it contrasts strikingly with previous schemes based on‘geosyncline’tectonics, continent-continent collision-related tectonics, or terrane tectonics. Most of the geotectonic units in Japan are composed of Late Paleozoic to Cenozoic accretionary complexes and their high-PIT metamorphic equivalents, except for two units representing fragments of Precambrian cratons, which were detached from mainland Asia in the Tertiary. These ancient accretionary complexes are identified using the method of oceanic plate stratigraphy. The Japanese Islands are comprised of 12 geotectonic units, all noted in southwest Japan, five of which have along-arc equivalents in the Ryukyus. Northeast Japan has nine of these 12 geotectonic units, and East Hokkaido has three of these units. Recent field observations have shown that most of the primary geotectonic boundaries are demarcated by low-angle faults, and sometimes modified by secondary vertical normal and/or strike-slip faults. On the basis of these new observations, the tectonic evolution of the Japanese Islands is summarized in the following stages: (i) birth at a rifted Yangtze continental margin at ca 750–700 Ma; (ii) tectonic inversion from passive margin to active margin around 500 Ma; (iii) successive oceanic subduction beginning at 450 Ma and continuing to the present time; and (iv) isolation from mainland Asia by back-arc spreading at ca 20 Ma. In addition, a continent-continent collision occurred between the Yangtze and Sino-Korean cratons at 250 Ma during stage three. Five characteristic features of the 450 Ma subduction-related orogen are newly recognized here: (i) step-wise (not steady-state) growth of ancient accretionary complexes; (ii) subhorizontal piled nappe structure; (iii) tectonically downward-younging polarity; (iv) intermittent exhumation of high-P/T metamorphosed accretionary complex; and (v) microplate-induced modification. These features suggest that the subduction-related orogenic growth in Japan resulted from highly episodic processes. The episodic exhumation of high-P/T units and the formation of associated granitic batholith (i.e. formation of paired metamorphic belts) occurred approximately every 100 million years, and the timing of such orogenic culmination apparently coincides with episodic ridge subduction beneath Asia.     

The odyssey of the Cache Creek terrane,Canadian Cordillera: Implications for accretionary orogens,tectonic setting of Panthalassa,the Pacific superwell,and break-up of Pangea

The Cache Creek terrane (CCT) of the Canadian Cordillera consists of accreted seamounts that originated adjacent to the Tethys Ocean in the Permian. We utilize Potential Translation Path plots to place quantitative constraints on the location of the CCT seamounts through time, including limiting the regions within which accretion events occurred. We assume a starting point for the CCT seamounts in the easternmost Tethys at 280 Ma. Using reasonable translation rates (11 cm/a), accretion to the Stikinia–Quesnellia oceanic arc, which occurred at about 230 Ma, took place in western Panthalassa, consistent with the mixed Tethyan fauna of the arc. Subsequent collision with a continental terrane, which occurred at about 180 Ma, took place in central Panthalassa, > 4000 km west of North America yielding a composite ribbon continent. Westward subduction of oceanic lithosphere continuous with the North American continent from 180 to 150 Ma facilitated docking of the ribbon continent with the North American plate.The paleogeographic constraints provided by the CCT indicate that much of the Canadian Cordilleran accretionary orogen is exotic. The accreting crustal block, a composite ribbon continent, grew through repeated collisional events within Panthalassa prior to docking with the North American plate. CCT's odyssey requires the presence of subduction zones within Panthalassa and indicates that the tectonic setting of the Panthalassa superocean differed substantially from the current Pacific basin, with its central spreading ridge and marginal outward dipping subduction zones. A substantial volume of oceanic lithosphere was subducted during CCT's transit of Panthalassa. Blanketing of the core by these cold oceanic slabs enhanced heat transfer out of the core into the lowermost mantle, and may have been responsible for the Cretaceous Normal Superchron, the coeval Pacific-centred mid-Cretaceous superplume event, and its lingering progeny, the Pacific Superswell. Far field tensile stress attributable to the pull of the slab subducting beneath the ribbon continent from 180 to 150 Ma instigated the opening of the Atlantic, initiating the dispersal phase of the supercontinent cycle by breaking apart Pangea. Docking of the ribbon continent with the North American plate at 150 Ma terminated the slab pull induced stress, resulting in a drastic reduction in the rate of spreading within the growing Atlantic Ocean.     

Polyphase accretionary tectonics in the Jurassic to Cretaceous accretionary belts of central Japan

Abstract Mesozoic accretionary complexes of the southern Chichibu and the northern Shimanto Belts, widely exposed in the Kanto Mountains, consist of 15 tectonostratigraphic units according to radiolarian biochronologic data. The units show a zonal arrangement of imbricate structure and the age of the terrigenous clastics of each unit indicates successive and systematic southwestward younging. Although rocks in these complexes range in age from Carboniferous to Cretaceous, the trench-fill deposits corresponding to the Hauterivian, the Aptian to Middle Albian and the Turonian are missing. A close relationship between the missing accretionary complexes and the development of strike-slip basins is recognizable. The tectonic nature of the continental margin might have resulted from a change from a convergent into a transform or oblique-slip condition, so that strike-slip basins were formed along the mobile zones on the ancient accretionary complexes. Most terrigenous materials were probably trapped by the strike-slip basins. Then, the accretion of the clastic rock sequence occurred, probably as a result of the small supply of terrigenous materials in the trench. However, in the case of right-angle subduction, terrigenous materials might have been transported to the trench through submarine canyons and deposited there. Thus, the accretionary complexes grew rapidly and thickened. Changes both in oceanic plate motion and in the fluctuation of terrigenous supply due to the sedimentary trap caused pulses of accretionary complex growth during Jurassic and Cretaceous times. In the Kanto Mountains, three tectonic phases are recognized, reflecting the changes of the consuming direction of the oceanic plates along the eastern margin of the Asian continent. These are the Early Jurassic to early Early Cretaceous right-angle subduction of the Izanagi Plate, the Early to early Late Cretaceous strike-slip movement of the Izanagi and Kula Plates, and the late Late Cretaceous right-angle subduction of the Kula Plate.     

Late Cretaceous genesis of the Kula plate

We propose that the Pacific-Kula ridge began spreading approximately 85 m.y. B.P., during Late Cretaceous time. Extrapolation of the Great Magnetic Bight backwards in time results in an implausible ridge configuration. This implies that plate velocity vectors for the Pacific, Kula, and Farallon plates were not constant during this interval. Evidence for splitting of the Kula plate from the Pacific plate along the Chinook trough is the relationship between the north-striking Amlia and Adak fracture zones, the Chinook and Emperor troughs, and the magnetic lineations south of the Aleutian trench. If this hypothesis is correct, it will require that Mesozoic reconstructions of the Pacific basin and their relation to Cenozoic reconstructions be re-examined. A previously unrecognized Mesozoic plate may be required. We propose calling this the Izanagi plate.     

The Heilongjiang Group: A Jurassic accretionary complex in the Jiamusi Massif at the western Pacific margin of northeastern China

Abstract The tectonic setting of the Eastern Asian continental margin in the Jurassic is highly controversial. In the current study, we have selected the Heilongjiang complex located at the western margin of the Jiamusi Massif in northeastern China for geochronological investigation to address this issue. Field and petrographic investigations indicate that the Heilongjiang complex is composed predominately of granitic gneiss, marble, mafic‐ultramafic rocks, blueschist, greenschist, quartzite, muscovite‐albite schist and two‐mica schist that were tectonically interleaved, indicating they represent a mélange. The marble, two‐mica schist and granitic gneiss were most probably derived from the Mashan complex, a high‐grade gneiss complex in the Jiamusi Massif with which the Heilongjiang Group is intimately associated. The ultramafic rocks, blueschist, greenschist and quartzite (chert) are similar to components in ophiolite. The sensitive high mass‐resolution ion microprobe U‐Pb zircon age of 265 ± 4 Ma for the granitic gneiss indicates that the protolith granite was emplaced coevally with Permian batholiths in the Jiamusi Massif. ⁴⁰Ar/³⁹Ar dating of biotite and phengite from the granitic gneiss and mica schist yields a late Early Jurassic metamorphic age between 184 and 174 Ma. Early components of the Jiamusi Massif, including the Mashan complex, probably formed part of an exotic block from Gondwana, affected by late Pan‐African orogenesis, and collided with the Asian continental margin during the Early Jurassic. Subduction of oceanic crust between the Jiamusi block and the eastern part of the Central Asian Orogenic Belt resulted in the formation of a huge volume of Jurassic granites in the Zhangguangcai Range. Consequently, the collision of the Jiamusi Massif with the Central Asian Orogenic Belt to the west can be considered as the result of circum‐Pacific accretion, unrelated to the Central Asian Orogenic Belt. The widespread development of Jurassic accretionary complexes along the Asian continental margin supports such an interpretation.     

Ar-Ar geochronology of Late Mesozoic volcanic rocks from the Yanji area, NE China and tectonic implications

Ar-Ar dating results of late Mesozoic-Cenozoic volcanic rocks from the Yanji area, NE China provide a new volcano-sedimentary stratigraphic framework. The previously defined “Triassic-Jurassic” volcanic rocks (including those from Sanxianling, Tuntianying, Tianqiaoling and Jingouling Fms.) were erupted during 118―106 Ma, corresponding to Early Cretaceous. The new eruption age span is slightly younger than the main stage (130―120 Ma) of the extensive magmatism in the eastern Central Asian Orogenic Belt and its adjacent regions. Subduction-related adakites occurring in the previously defined Quanshuicun Fm. were extruded at ca. 55 Ma. Based on these new Ar-Ar ages, the late Mesozoic to Palaeocene volcano-sedimentary sequences is rebuilt as: Tuopangou Fm., Sanxianling/Tuntianying Fm. (118―115 Ma), Malugou/Tianqiaoling Fm. (K1), Huoshanyan/Jingouling Fm. (108―106 Ma), Changcai Fm. (K2), Quanshuicun Fm. (~55 Ma) and Dalazi Fm. Our results suggest that subduction of the Pa- laeo-Pacific Ocean beneath the East Asian continental margin occurred during 106 to 55 Ma, consistent with the paleomagnetic observations and magmatic records which indicated that the Izanagi-Farallon ridge subduction beneath the southwestern Japan took place during 95―65 Ma.     

Early Tertiary rupture of the Pacific plate: 1700 km of dextral offset along the Emperor trough-Line Islands lineament

Between 67 and ～40 Ma ago a northwest-southeast-trending fracture system over 8000 km long split the Pacific plate and accumulated at least 1700 km of dextral offset between the east and west portions. This system, here named the Emperor fracture zone (EFZ) system, consisted of several segments, one along the present trace of the Emperor trough and another along the Line Islands, joined by short spreading ridges. The EFZ terminated at its northern end against the Kula-Pacific ridge, and at its southern end in a ridge-transform system, called the Emperor spreading system, which extended to the west, north of Australia.The finite angular velocity vector describing the relative motion between the East and West Pacific plates is ～0.6°/Ma about a pole at 36°N, 70°W. This vector, added to the known Early Tertiary motion of the Pacific plate with respect to the global hotspot reference frame, accounts in large part for the NNW trend of the Emperor seamount chain relative to the WNW Hawaiian trend, without violation of the integrity of the Antarctic plate. The Meiji-Emperor and Emperor-Hawaiian bends date, respectively, the initiation (～67 Ma ago) and cessation (～40 Ma ago) of seafloor spreading on the Emperor spreading system.The postulated Early Tertiary relative motion along the EFZ between the East and West Pacific plates explains (1) the present misalignment of the two sets of magnetic bights of the Pacific, (2) the abrupt truncation of eastern Pacific bathymetric lineaments against the Emperor trough and Line Islands, (3) the contrast in paleolatitude between the eastern and western Pacific as indicated by paleomagnetic and sedimentologic studies, and (4) the anomalous gravity signature of the central Hawaiian ridge that indicates that the ridge loaded thin hot lithosphere.