可变角度换能器在海底沉积物声学原位测量应用的探讨

海底沉积物的声学测量是海底测深的关键技术之一,应用于海底地形地貌测量、海洋矿产资源开采和海底工程建设等。海底沉积物声学测量方法中的原位测量方法可以避免保真采样法的强扰动性和遥测法的准确度、精度及灵敏度的不确定性等缺点,如何改进原位测量系统渐成为海底探测的研究热点。通过分析现有海底沉积物原位测量设备测试换能器的工作原理,针对垂直压入方式换能器测量深度有限,提出了一种通过改变换能器压入沉积物的角度来增加测量深度的方法。在理论上论证出在不低于换能器接收阈值时,测量深度随着掠射角的增加而增加。在不增加压入深度的前提下提供了一种增加测量深度方法。     

精密海洋测量与数据处理技术及其应用进展

随着我国海洋经济向深海、远海推进,精密海洋测量及数据处理技术得到迅速发展。简要地介绍了武汉大学测绘科学与技术学院在海洋大地测量、海底地形地貌信息获取、水下导航定位、潮汐潮流数据处理及应用、海底底质探测和分类等方面的最新研究进展,对我国的海洋测绘发展具有一定的借鉴和促进作用。     

温盐深测量平台发展现状与趋势

温度、盐度和压力是海洋重要的基本物理特性参数。温盐深测量仪(Conductivity Temperature Depth,CTD)是海水温盐剖面观测的关键仪器,在海洋经济开发、海洋观测、海洋国防建设方面有着极为重要的意义。本文介绍了几种典型的温盐深测量设备及移动观测平台,重点论述了CTD在Argo浮标、水下滑翔机等海洋移动观测平台上的应用现状,分析了水下滑翔机搭载的CTD在热滞效应、湍流等因素影响下产生的测量误差。最后探讨了以水下滑翔机为代表的海洋移动观测平台搭载CTD测量技术的发展趋势及应用前景。     

基于观测网的海底动力环境监测系统的设计与实现

海底动力环境监测系统是南海海底观测网试验系统的重要课题。在"十一五"观测网的基础上,对系统的稳定性与可靠性进行改进,设计使用CAN现场总线通信、ARM双冗余备份、Modem声学网关通道、DC/DC并联冗余与备份电池。该系统主要搭载声学多普勒流速剖面仪(ADCP)、国家海洋技术中心温盐深测量仪(CTD)、高精度压力传感器等设备,集成岸基监测与反馈子系统、控制与数据采集子系统、通信与电源管理子系统,实现了对海底边界层速度剖面场、湍流速度、温度、盐度、压力等海洋动力要素的长期实时稳定监测。经过试验测试,该系统稳定可靠,利于传感器扩展集成,为海底观测网提供了可靠的验证观测节点。     

以二相饱和介质为模型的地基与结构相互作用的动力有限元分析

本文首次将海洋地基土模型化为二相饱和介质进行土壤地基与海洋平台结构相互作用的动力有限元分析,文中给出了分析原理,并以此为基础编制了动力子结构分析程序。算例结果表明孔隙水存在对结构和地基的受力与变形的影响。文末对该课题有待进行的一些工作进行了论述。     

轻型海洋静力触探系统在黄河水下三角洲的应用

轻型海洋静力触探系统是适合于海上作业的电测式原位测试系统,它通过传感器可以同步测量锥端阻力、侧壁摩擦力及孔隙水压力等3项指标,从而推算海底土力学参数。使用轻型海洋静力触探系统在黄河水下三角洲浅水区域进行了地质勘察,勘察结果表明：该系统运行稳定,操作简单,测试结果可靠,成果可以在海底土层结构划分、地基土承载力计算和土体液化判别等方面进行应用,从而避免了常规地质钻探取芯对样品扰动造成测试结果失真的问题,该项原位测试技术可以在海洋工程或油气开发中得到广泛的应用。     

海底观测网发展现状及趋势研究

文中详细研究了当前世界上最典型的海底观测网的建设发展规模、形式、设备类型以及我国海底观测网的发展现状,并对国内外海底观测网的发展趋势进行总结。对日本、加拿大、美国及欧洲的海底观测网进行了设备级研究,对我国台湾地区、东海、南海的海底观测网现状进行了研究,并讨论了国外先进观测网对我国的海底观测网建设的借鉴意义。文中总结出海底观测网发展的整体趋势为:单节点网络加速验证新型设备及传感器的水下能力;区域尺度网络用于加速多学科发展并提升灾害预警能力;而浮标平台网络作为补充,铺设在远海区域以降低阶段建设成本。     

一种新型浅地层剖面仪试验平台的设计与应用

为探讨浅地层剖面声学影像形成原理,探索不同类型沉积物声学影像特征,厘清不同沉积物厚度的识别算法,采用模块化设计理念研发一套新型浅地层剖面仪室内试验平台。综合室内定位技术、浅剖试验平台尺寸合理性分析技术、直线轨道与换能器之间的固定连接技术和海底声学参数反演技术,形成一个试验高效的新型平台。通过铺设沉积物和布设障碍物,利用浅地层剖面仪进行走航测试,精确识别了沉积物的厚度和障碍物的位置。该平台可为开展理想环境下沉积物厚度和障碍物识别提供较好的测试环境,为声学海洋设备性能检测提供测试平台,也为高校学生和技术人员提供设备使用培训场所。     

基于半仿真实验系统的调谐质量阻尼器等效阻尼力测量

为了研究调谐质量阻尼器(tuned mass damper,TMD)在海洋平台冰激振动中的减振效果,提出一种基于半仿真实验系统的TMD等效阻尼力测量方法,利用该系统可以直接测试结构安装TMD装置时产生的作用力.介绍该实验系统的测试原理及等效阻尼力的测量方法,并在正弦位移输入下,对TMD装置进行了测试,比较等效阻尼力的实测值与计算值,结果证明利用该系统可以测量得到TMD的等效阻尼力.     

海底热流原位测量技术研究

海底热流测量对于海洋地热学基础研究与天然气水合物等新兴海洋矿产资源勘测具有重要意义。海底热流原位测量是现代海底热流探测技术的发展方向。针对我国目前在该项技术的落后局面,通过对现存几种热流原位测量技术的原理与技术特点的对比与分析,指出了我国未来发展海底热流测量技术的方向与重点。     

国际海洋测绘教育培训特点及发展对策

分析了海洋测绘教育培训国际化和标准化的原因及进程,论述了海洋测绘国际化教育培训的指导性文件及内容,针对国际化海洋测绘教育培训的特点与发展趋势,提出了发展我国海洋测绘教育培训的对策与建议。     

壳寡糖及其全乙酰化衍生物的制备及结构表征

探讨了壳寡糖及全乙酰壳寡糖的制备方法,通过正交实验考察了原料、温度、时间对降解产物的影响.制备了八种寡糖（八乙酰壳二糖、十一乙酰壳三糖、十四乙酰壳四糖和十七乙酰壳五糖,以及N,N′-二乙酰壳二糖、N,N′,N″-三乙酰壳三糖、N,N′,N″,N′′′四乙酰壳四糖和N,N′,N″,N′′′,N′′′′-五乙酰壳五糖）,并通过IR、NMR及MS等确定了其化学结构.     

聚多巴胺的合成、聚合机理及其在海洋防腐防污中的应用

聚多巴胺(polydopamine, PDA)含有大量的酚羟基和氨基官能团, 可以在玻璃、不锈钢、塑料、橡胶、聚四氟乙烯等材料表面黏附, 具有优异的粘附性能, 是重要的功能材料之一。本文对近年来国内外围绕聚多巴胺展开的研究进行了综述, 从聚多巴胺的合成方法、聚合机理和性能出发, 分析总结了当前合成的特点、机理研究的方案和存在的问题, 并对聚多巴胺在海洋防腐领域的应用进行了总结和展望, 旨在为研究者较全面了解聚多巴胺的研究现状提供参考。     

Coastal and estuarine habitat mapping, using LIDAR height and intensity and multi-spectral imagery

The airborne laser scanning LIDAR (LIght Detection And Ranging) provides high-resolution Digital Terrain Models (DTM) that have been applied recently to the characterization, quantification and monitoring of coastal environments. This study assesses the contribution of LIDAR altimetry and intensity data, topographically-derived features (slope and aspect), and multi-spectral imagery (three visible and a near-infrared band), to map coastal habitats in the Bidasoa estuary and its adjacent coastal area (Basque Country, northern Spain). The performance of high-resolution data sources was individually and jointly tested, with the maximum likelihood algorithm classifier in a rocky shore and a wetland zone; thus, including some of the most extended Cantabrian Sea littoral habitats, within the Bay of Biscay. The results show that reliability of coastal habitat classification was more enhanced with LIDAR-based DTM, compared with the other data sources: slope, aspect, intensity or near-infrared band. The addition of the DTM, to the three visible bands, produced gains of between 10% and 27% in the agreement measures, between the mapped and validation data (i.e. mean producer's and user's accuracy) for the two test sites. Raw LIDAR intensity images are only of limited value here, since they appeared heterogeneous and speckled. However, the enhanced Lee smoothing filter, applied to the LIDAR intensity, improved the overall accuracy measurements of the habitat classification, especially in the wetland zone; here, there were gains up to 7.9% in mean producer's and 11.6% in mean user's accuracy. This suggests that LIDAR can be useful for habitat mapping, when few data sources are available. The synergy between the LIDAR data, with multi-spectral bands, produced high accurate classifications (mean producer's accuracy: 92% for the 16 rocky habitats and 88% for the 11 wetland habitats). Fusion of the data enabled discrimination of intertidal communities, such as Corallina elongata, barnacles (Chthamalus spp.), and stands of Spartina alterniflora and Phragmites australis, which presented misclassification when conventional visible bands were used alone. All of these results were corroborated by the kappa coefficient of agreement. The high classification accuracy found here, selecting data sources, highlights the value of integrating LIDAR data with multi-spectral imagery for habitat mapping in the intertidal complex fringe.     

Adsorption and desorption of proteins and polyamino acids by clay minerals and marine sediments

The adsorption and desorption of proteins and polyamino acids on illite, montmorillonite, goethite, and marine sediments was investigated. Three ¹⁴C-labeled hydrophilic proteins, Rubisco from C. reinhardtii, and GroEL and GroES from genetically modified Escherichia coli, were synthesized and purified for this study. The proteins were strongly and rapidly adsorbed by the clay minerals and marine sediments, and much of the adsorbed protein was not readily desorbed. Sodium dodecyl sulfate (SDS) extraction and separation by SDS-polyacrylamide gel electrophoresis (PAGE) and sucrose density gradients showed that Rubisco and GroEL were adsorbed on illite and sediments in their original forms. The apparent adsorption partition coefficients of the proteins were on the order of 10² l/kg on illite, 10³–10⁴ l/kg on goethite and montmorillonite, and 200 and 75 l/kg on Skan Bay and Resurrection Bay (Alaska) sediments, respectively. These partition coefficients are sufficiently large to permit sedimentary protein preservation via an adsorptive mechanism. Generally, basic polyamino acids had greater adsorption partition coefficients than acidic polyamino acids. Molecular size did not affect the electrostatic interaction between polyamino acids and mineral surfaces. Adsorption of bovine serum albumin (BSA) and negatively charged polyamino acids inhibited Rubisco adsorption, while positively charged cytochrome c and polyamino acids increased Rubisco adsorption. These results indicate that electrostatic interactions dominated in protein adsorption.