利用线性调频脉冲进行帧同步的方法及性能

针对水声信道的特点,提出了一种利用具有大的时宽带宽积的线性调频信号作为帧同步信号的方法。该方法首先在接收端进行滑动时频分析,从而实现线性调频信号的检测及粗同步,再进一步利用拷贝相关处理来实现细同步。计算机仿真和海上试验结果均表明,该方法能够在多途干扰下有效地实现同步。     

水声信道中一种抗多途跳频通信的研究

水声通道系统是当代海洋开发和海洋环境立体监测中的重要技术组成部分，广泛应用于海洋监测、海洋资源勘探和开发等方面。然而，水声信道的随机起伏、时－空－频变的多途特征使水声通信技术成为当代最为复杂的通信技术之一。本文介绍近年来在高速水声通信方面的一些研究进展，讨论了一种利用高速数字信号处理器（DSP）实现水声信道跳频通信的方案，并探讨了该方案在调制信号设计及信号处理实现上所采用的关键技术。     

Underwater acoustic channel models for 4800 b/s QPSK signals

Two computer models are presented, one for short-range and one for long-range propagation of acoustic signals through an underwater channel from a transmitter to a receiver. In the short-range model, the received signal is due to a direct path (steady component) and a random path (diffused component) that could be the result of boundary scattering. For the long-range case, the received signal is the superposition of a number of time-delayed, randomly propagated components arriving by different paths. Both models assume perfect transmitter-receiver synchronization but use realistic channel time delays. They demonstrate the time-varying characteristics of underwater acoustic channels and are used in simulations to evaluate the performance of the detection technique     

一个水声扩频通信系统设计与实现

严重的多途衰落、多普勒频偏是水声通信中引起误码的主要原因。低功耗、远距离、高隐蔽性、低信噪比检测、高可靠性的数据传输是水声通信的一个发展方向。设计并实现了一个水声扩频通信系统,有效地解决了以上问题,并采用快速相关算法,代替传统的矢量与矩阵相乘运算,极大地减少了程序的运行量,从而实时地处理接收信号。通过湖试和海试,验证了此通信系统的优良性能。     

一种基于正交频分复用的高速水声通信技术的研究

OFDM(正交频分复用)是一种适合于在多径衰落和受限带宽信道中进行高速传输的技术。论文把OFDM技术应用于高速水声通信中,设计了一套基于OFDM的高速水声通信系统,阐述了OFDM水声通信系统中同步和信道估计的方法。海上试验证明了系统的有效性。     

Shipborne Underwater Acoustic Communication System and Sea Trials with Submersible Shenhai Yongshi

The Shipborne acoustic communication system of the submersible Shenhai Yongshi works in vertical, horizontal and slant channels according to the relative positions. For ease of use, an array combined by a vertical-cone directional transducer and a horizontal-toroid one is installed on the mothership. Improved techniques are proposed to combat adverse channel conditions, such as frequency selectivity, non-stationary ship noise, and Doppler effects of the platform’s nonlinear movement. For coherent modulation, a turbo-coded single-carrier scheme is used. In the receiver, the sparse decision-directed Normalized Least-Mean-Square soft equalizer automatically adjusts the tap pattern and weights according to the multipath structure, the two receivers’ asymmetry, the signal’s frequency selectivity and the noise’s spectrum fluctuation. The use of turbo code in turbo equalization significantly suppresses the error floor and decreases the equalizer’s iteration times, which is verified by both the extrinsic information transfer charts and bit-error-rate performance. For noncoherent modulation, a concatenated error correction scheme of nonbinary convolutional code and Hadamard code is adopted to utilize full frequency diversity. Robust and low-complexity synchronization techniques in the time and Doppler domains are proposed. Sea trials with the submersible to a maximum depth of over 4500 m show that the shipborne communication system performs robustly during the adverse conditions. From the ten-thousand communication records in the 28 dives in 2017, the failure rate of the coherent frames and that of the noncoherent packets are both below 10%, where both synchronization errors and decoding errors are taken into account.     

Coastal acoustic tomography system and its field application

The coastal acoustic tomography system (CATS), composed of five moored acoustic stations, has been constructed to measure current fields. The system is developed with special considerations in mind, including the use of Global Positioning System clock signals in the synchronization of the system clock timing among the multiple acoustic stations, and the use of the differently coded Gold sequences to identify the acoustic signals corresponding to individual stations from a received signal. The CATS was successfully applied to map the structure of strongly nonlinear tidal currents in the coastal sea. In spite of the limited spatial resolution caused by inadequate sound transmission data, the two-dimensional tidal vortices features of growth, translation, and decay processes are reconstructed through an inverse analysis of the acoustic travel time obtained among the station pairs. It is evident that the CATS is a powerful tool for measuring variable current fields generated in the coastal seas     

Spatial modulation experiments in the underwater acoustic channel

A modulation technique for increasing the reliable data rate achievable by an underwater acoustic communication system is presented and demonstrated. The technique, termed spatial modulation, seeks to control the spatial distribution of signal energy such that the single physical ocean channel supports multiple parallel communication channels. Given a signal energy constraint, a communication architecture with access to parallel channels will have increased capacity and reliability as compared to one with access to a single channel. Results from two experiments demonstrate higher obtainable data rates and power throughput for a system employing spatial modulation than for one that does not. The demonstrated benefits were characterized by an equivalent SNR gain of over 5 dB in the first experiment. In the second experiment, using two element source and receiver arrays with apertures of 0.9 m, a coherently modulated signal was shown to offer nearly 50% greater capacity by using spatial modulation than by using temporal modulation alone.     

MIMO Underwater Acoustic Communication in Shallow Water with Ice Cover

Although multiple-input multiple-output(MIMO) underwater acoustic(UWA) communication has been intensively investigated in the past years, existing works mainly focus on open-water environment. There is no work reporting MIMO acoustic communication in under-ice environment. This paper presents results from a recent MIMO acoustic communication experiment which was conducted in Bohai Gulf during winter. In this experiment, high frequency MIMO signals centered at 10 kHz were transmitted from a two-element source array to a four-element vertical receiving array at 1 km range. According to the received signal of different array elements, MIMO acoustic communication in under-ice environment suffers less effect from co-channel interference compared with that in open-water environment. In this paper, time reversal followed by a single channel decision feedback equalizer is used to process the experimental data. It is demonstrated that this simple receiver is capable of realizing robust performance using fewer hydrophones(i.e. 2) without the explicit use of complex co-channel interference cancelation algorithms, such as parallel interference cancelation or serial interference cancelation.     

感应耦合技术在海洋声学同步测量中的应用

海洋声场环境研究需要对不同深度的海洋声学环境要素进行同步测量,而感应耦合数据传输技术可实现多个单通道水声测量仪之间的同步采集和记录。文中阐述了感应耦合数据传输技术的特点及其在海洋声学环境同步测量中的应用,介绍了一种利用感应耦合数据传输技术实现数据同步测量的声学浮标系统,详细描述了系统的方案设计、结构组成及感应耦合部分的关键技术。实验水池测试表明,该系统工作稳定可靠,数据同步性好,具有良好的应用前景。     

A simulation tool for high data-rate acoustic communication in ashallow-water, time-varying channel

The paper discusses the development of a simulation tool to model high data-rate acoustic communication in shallow water. The simulation tool is able to generate synthetic time series of signals received at a transducer array after transmission across a shallow-water communication channel. The simulation tool is suitable for testing advanced signal processing techniques for message recovery. A channel model has been developed based on the physical aspects of the acoustic channel. Special emphasis has been given to fluctuations of the signal transmission caused by time-varying multipath effects. At shorter ranges, the temporal variations are dominated by acoustic scattering from the moving sea surface. Therefore, the channel model produces a coherence function which may be interpreted as a time-varying reflection coefficient for the surface scattered acoustical path. A static, range-independent ray model identifies the significant multipaths, and the surface path is modulated with the time-varying reflection coefficient. The advantages and limitations of the channel model are discussed and assumptions necessary to overcome the limitations are emphasised. Based on the assumptions, an algorithm has been developed and implemented to model how a binary message will be modulated when transmitted by a transducer, is distorted in the channel and finally is received by a transducer array     

Digital underwater acoustic voice communications

This paper describes the design of an underwater acoustic diver communication system controlled by a digital signal processor. The speech signal transmission rate is compressed by using linear predictive coding (LPC) and the extracted parameters are transmitted through the water to a synchronized receiver by employing digital pulse position modulation (DPPM). The pulse position in each time frame is estimated by an energy detection and decision algorithm which enables the received LPC parameters to be recovered and used to synthesize the speech signal     

A Novel Method for Real-Time Monitoring of Channel Siltation Based on Bistatic Scattering Theory

Monitoring the thickness changes of channel siltation is paramount in safeguarding navigation and guiding dredging.This paper presents a novel method for realizing the field monitoring of channel siltation in real time.The method is based on the bistatic scattering theory and concerned more with the receiving and processing of multipath signal at high-frequency and small grazing angle.By use of the multipath propagation structure of underwater acoustic channel,the method obtains the silt thickness by calculating the relative time delay of acoustic signals between the direct and the shortest bottom reflected paths.Bistatic transducer pairs are employed to transmit and receive the acoustic signals,and the GPS time synchronization technology is introduced to synchronize the transmitter and receiver.The WRELAX (Weighted Fourier transform and RELAX) algorithm is used to obtain the high resolution estimation of multipath time delay.To examine the feasibility of the presented method and the accuracy and precision of the developed system,a series of sea trials are conducted in the southwest coast area of Dalian City,north of the Yellow Sea.The experimental results are compared with that using high-resolution dual echo sounder HydroBoxTM,and the uncertainty is smaller than ±0.06 m.Compared with the existing means for measuring the silt thickness,the present method is innovative,and the system is stable,efficient and provides a better real-time performance.It especially suits monitoring the narrow channel with rapid changes of siltation.     

多模式自适应水下无线通信网络框架研究

对当前典型的水下无线通信网进行分析,针对水声、光、射频3种通信模式在水下无线通信中的优缺点,提出基于软件无线电技术的多模式自适应水下无线通信网络的概念及其框架结构,并对其中的自适应调制解调方式展开研究.结合MAC层协议,提出一种跨层的自适应调制解调解决方案,即通过收发双方的握手信息携带当前信道状态,由发射方根据握手信息,判断双方通信距离,预计信道未来状态,结合需要传输的数据量,自适应选择合适的通信模式和调制方式,并利用握手信号通知接收方,从而实现在通信网络范围内数据或指令的快速可靠传输.     

AUV定位信号检测延时的蒙特卡洛模拟分析

在简要介绍AUV声学定位声纳接收机原理基础上,分析了CW脉冲信号在极性相关检测电路中的传输过程,建立了极性相关积分检测延时仿真分析模型。提出采用蒙特卡洛模拟方法获取检测延时的分布特征和统计参数的观点。实验结果表明蒙特卡洛模拟实验与硬件电路实验结果一致,对于解决随机性检测延时问题具有很强的能力。获得的结果可为AUV定位声纳检测门限的设定、声学测距和定位精度分析以及水声通信延时分析提供参考。     

一种简易的潜标辅助寻标定位系统

介绍一种自主研发的、结合GPS定位和水声测距于一体的潜标自动搜寻定位系统。系统由安装于搜索船只上的全球定位系统GPS接收机、水声释放器甲板单元、综合信号接收处理单元(由计算机组成),以及集成于潜标系统水声释放器上的水声应答系统组成。利用GPS定位原理,将GPS测得的定位信息,与水声测距技术相结合,实现潜标系统的空间定位,为潜标系统的可靠回收提供技术保障。     

水声数据通信系统研究

提出一种基于并行传输体制的水声数据通信系统设计方案,发射端采用纠错能力很强的级联码和MFSK调制,分集技术采用抑制载波的双边带调制方式,接收端对接收信号利用快速频谱分析进行解调,并进行硬判决Viterbi译码和BM迭代译码。实验表明,该水声数据通信系统的传输波特率为200bits/s。误码率达到10^-5～10^-6以下。     

Acoustic telemetry--An overview

Acoustic telemetry from underwater submersibles and sensors has been pursued ever since it was recognized that the ocean could support signal transmission. While it has been evident that some form of communication is possible, the ocean has proved to be a distressingly difficult medium in which to achieve high data rates. High data rate transmission requires a wide bandwidth which is severely constrained in the ocean because of the absorption of high-frequency energy. Moreover, the ocean is a very reverberant environment with both time and frequency spreading of signals; this further limits data transmission rates. The net effect of the bandwidth and reverberation constraints has led to either acoustic telemetry systems with low data rates or to the use of tethered systems. Over the years, various forms of acoustic communication systems have been developed. These have included direct AM and SSB for underwater telephones, FM for sensor data, FSK and DPSK for digital data, and parametric sonars for narrow-beam systems. As offshore operations have increased, several other systems have been proposed and/or built to respond to particular needs. In this paper, we review the underwater channel and the limitations that it imposes upon acoustic telemetry systems. We then survey some of the systems that have been built (excluding military systems) and indicate how they use various communication system principles to overcome these limitations.     

The range-averaged intensity model: a tool for underwater acousticfield analysis

The range-averaged intensity model (RAIM) long known as a powerful method for transmission loss estimation in waveguides, is extended to other aspects of the acoustic field: impulse response and angular pattern estimations at a receiver, general time spreading in a waveguide, signal fluctuations, reverberation levels, and ambient noise structure. An example of its application to a SOFAR propagation and detection case is presented. This method appears to be a very efficient and reliable analysis tool for many underwater acoustics configurations: particularly long-range horizontal telemetry and shallow-water sonar     

1PPS时间同步对多波束测深质量的影响

时间同步误差是多波束测量的一个重要误差源.因此,在进行多波束海底地形测量时,一般都利用GPS的1PPS信号来实现精确的时间同步.介绍了1PPS信号,分析了多波束测深系统的时间同步原理,以及在没有1PPS同步的情况下,后处理时应注意的事项.最后对野外资料采集提出了相应的建议.