Fluid and magmatic processes in the formation of the Ary-Bulak ongonite massif (eastern Transbaikalia)

The paper discusses the formation conditions of the Ary-Bulak ongonite massif (eastern Transbaikalia). Studies of melt and fluid inclusions have shown that, along with crystalline phases and a silicate melt, ongonitic magma contained aqueous–saline fluids of different types, fluoride melts compositionally similar to fluorite, sellaite, cryolite, chiolite, and more complex aluminum fluorides as well as silicate melts with abnormal Cs and As contents. An ongonite melt crystallized with the participation of P–Q fluids as vapor solutions, presumably NaF-containing and slightly admixed with chlorides. We studied the properties and composition of brine inclusions from Ca- and F-rich rocks on the margin of the massif. Depending on the thermophysical properties of the host rocks and ongonite melt, the duration of its crystallization has been estimated for a magma chamber of the size and shape of the Ary-Bulak massif. Magma chamber cooling has been modeled, and the density, viscosity, and Rayleigh number of the ongonite melt have been estimated from the composition of silicate glasses in melt inclusions. These data strongly suggest intense convection in the residual magma chamber lasting for centuries. We have calculated possible fluid overpressure during the crystallization and degassing of the ongonite melt in a closed magma chamber.Calcium- and fluorine-rich aphyric and porphyritic rocks on the southwestern margin of the massif might have formed by the following mechanism. Local decompression in the magma chamber quenched an oxygen-containing calcium fluoride melt accumulated at the crystallization front, and then these rocks altered during the interaction with fluids. When penetrating the marginal zone, a P–Q magmatic fluid which coexisted with the melt in the residual chamber cooled and changed its composition and properties. This caused the fluid to boil and segregate into immiscible phases: a vapor solution and a brine extremely rich in Cl, F, K, Cs, Mn, Fe, and Al. The fluoride and silicate liquids were immiscible; the silicate melts had abnormal Cs and As contents; changes in the composition and properties of the magmatic fluids caused them to boil and produce brines. All this is evidence for complex fluid–magma interaction and heterogeneous ongonitic magma during the crystallization of the Ary-Bulak rocks. These processes were favored by the low viscosity and high mobility of the F- and water-rich ongonite melt, intense melt convection in the residual chamber, and rising fluid pressure during its degassing.     

Significance of selective crystal entrainment and differential crystal-melt separation in petrogenesis of granites from the Tongbai orogen

Partial melting has been shown to be an important mechanism for intracrustal differentiation and granite petrogenesis. However, a series of compositional differences between granitic melt from experiments and natural granites indicate that the processes of crustal differentiation are complex. To shed light on factors that control the processes of crustal differentiation, and then the compositions of granitic magma, a combined study of petrology and geochemistry was carried out for granites (in the forms of granitic veins and parautochthonous granite) from a granulite terrane in the Tongbai orogen, China. These granites are characterized by high SiO₂ (>72 wt%) and low FeO and MgO (<4 wt%) with low Na₂O/K₂O ratios (<0.7). Minerals in these granites show variable microstructures and compositions. Phase equilibrium modelling using P–T pseudosections shows that neither anatectic melts nor fractionated melts match the compositions of the target granites, challenging the conventional paradigm that granites are the crystallized product of pure granitic melts. Based on the microstructural features of minerals in the granites, and a comparison of their compositions with crystallized minerals from anatectic melts and minerals in granulites, the minerals in these granitoids are considered to have three origins. The first is entrained garnets, which show comparable compositions with those in host granulites. The second is early crystallized mineral from melts, which include large plagioclase and K-feldspar (with high Ca contents) crystals as well as a part of biotite whose compositions can be reproduced by crystallization of the anatectic melts. The compositions of other minerals such as small grained plagioclase, K-feldspar and anorthoclase in the granites with low Ca contents are not well reconstructed, so they are considered as the third origin of crystallized products of fractionated melts. The results of mass balance calculation show that the compositions of these granites can be produced by mixing between different proportions of crystallized minerals and fractionated melts with variable amounts of entrained minerals. However, the calculated modal proportions of different crystallized minerals (plagioclase, K-feldspar, biotite and quartz) in the granites are significantly different from those predicted by melt crystallization modelling. Specifically, some rocks have lower modes of biotite and plagioclase, whereas others show lower K-feldspar modes than those produced by melt crystallization. This indicates that the crystallized minerals would be differentially separated from the primary magmas to form the evolved magmas that produce these granites. Therefore, the crystal entrainment and differential melt-crystal separation make important contributions to the composition of the target granites. Compared with leucogranites worldwide, the target granites show comparable compositions. As such, the leucogranites may form through the crystal fractionation of primary granitic magmas at different extents in addition to variable degrees of partial melting.     

Laser-ablation ICP-MS analysis of silicate and sulfide melt inclusions in an andesitic complex II: evidence for magma mixing and magma chamber evolution

Laser-ablation microanalysis of a large suite of silicate and sulfide melt inclusions from the deeply eroded, Cu-Au-mineralizing Farallón Negro Volcanic Complex (NW Argentina) shows that most phenocrysts in a given rock sample were not formed in equilibrium with each other. Phenocrysts in the andesitic volcano were brought together in dominantly andesitic—dacitic extrusive and intrusive rocks by intense magma mixing. This hybridization process is not apparent from macroscopic mingling textures, but is clearly recorded by systematically contrasting melt inclusions in different minerals from a given sample. Amphibole (and rare pyroxene) phenocrysts consistently contain inclusions of a mafic melt from which they crystallized before and during magma mixing. Most plagioclase and quartz phenocrysts contain melt inclusions of more felsic composition than the host rock. The endmember components of this mixing process are a rhyodacite magma with a likely crustal component, and a very mafic mantle-derived magma similar in composition to lamprophyre dykes emplaced early in the evolution of the complex. The resulting magmas are dominantly andesitic, in sharp contrast to the prominently bimodal distribution of mafic and felsic melts recorded by the inclusions. These results severely limit the use of mineral assemblages to derive information on the conditions of magma formation. Observed mineral associations are primarily the result of the mixing of partially crystallized magmas. The most mafic melt is trapped only in amphibole, suggesting pressures exceeding 350 MPa, temperatures of around 1,000 °C and water contents in excess on 6 wt%. Upon mixing, amphibole crystallized with plagioclase from andesitic magma in the source region of porphyry intrusions at 250 MPa, 950 °C and water contents of 5.5 wt%. During ascent of the extrusive magmas, pyroxene and plagioclase crystallized together, as a result of magma degassing at low pressures (150 MPa). Protracted extrusive activity built a large stratovolcano over the total lifetime of the magmatic complex (>3 m.y.). The mixing process probably triggered eruptions as a result of volatile exsolution.Electronic Supplementary Material Supplementary material (eTable 1and eFigure 1) is available for this article if you access the article at . A link in the frame on the left on that page takes you directly to the supplementary material.Editorial responsibility: T.L. Grove     

Partitioning of rare earth elements between an aqueous chloride fluid phase and melt during the decompression-driven degassing of granite magmas

This paper reports the results of numerical simulation for the behavior of rare earth elements (REE) during decompression degassing of H₂O- and Cl-bearing granite melts at pressures decreasing from 3 to 0.5–0.3 kbar under near isothermal conditions (800 ± 25°C). Fluid phase in equilibrium with the melt contains mainly chloride REE complexes, and their behavior during magma degassing is, therefore, intimately related to the behavior of chlorine. It was shown that the contents and distribution patterns of REE in the aqueous chloride fluid phase formed during decompression vary considerably depending on (1) the contents of volatiles (Cl and H₂O) in the initial melt, (2) the redox state of the magma, and (3) the dynamics of fluid phase separation from magmas during their ascent toward the Earth’s surface. During decompressiondriven degassing, the contents of both Cl and REE in the fluid decrease, especially dramatically under opensystem conditions. The REE patterns of the fluid phase compared with those of the melt are characterized by a higher degree of light to heavy REE fractionation. A weak negative Eu anomaly may be present in the REE patterns of Cl-rich fluids formed during the early stages of degassing at relatively high pressures. At a further decrease in pressure and Cl content in the fluid, it is transformed into a positive Eu anomaly increasing during decompression degassing. Such an anomalous behavior of Eu during degassing is related to its occurrence in magmatic melts in two valence states, Eu³⁺ and Eu²⁺, whereas the other REE occur in melts mainly as (REE)³⁺. The Eu³⁺/Eu²⁺ ratio of melt is controlled by the redox state of the magmatic system. The higher the degree of melt reduction, the more pronounced the anomalous behavior of Eu during decompression degassing. The amount of REE extracted by fluid from melt during various stages of degassing does not significantly influence the content and distribution patterns of REE in the melt.     

Crystal fractionation,magma step ascent,and syn-eruptive mingling: the Averno 2 eruption (Phlegraean Fields,Italy)

The 3.7 ka year-old Averno 2 eruption is one of the rare eruptions to have occurred in the northwest sector of the Phlegraean Fields caldera (PFc) over the past 5 ka. We focus here on the fallout deposits of the pyroclastic succession emplaced during this eruption. We present major and trace element data on the bulk pumices, along with major and volatile element data on clinopyroxene-hosted melt inclusions, in order to assess the conditions of storage, ascent, and eruption of the feeding trachytic magma. Crystal fractionation accounts for the evolution from trachyte to alkali-trachyte magmas; these were intimately mingled (at the micrometer scale) during the climactic phase of the eruption. The Averno 2 alkali trachyte represents one of the most evolved magmas erupted within the Phlegraean Fields area and belongs to the series of differentiated trachytic magmas erupted at different locations 5 ka ago. Melt inclusions record significant variations in H₂O (from 0.4 to 5 wt%), S (from 0.01 to 0.06 wt%), Cl (from 0.75 up to 1 wt%), and F (from 0.20 to >0.50 wt%) during both magma crystallization and degassing. Unlike the eruptions occurring in the central part of the PFc, deep-derived input(s) of gas and/or magma are not required to explain the composition of melt inclusions and the mineralogy of Averno 2 pumices. Compositional data on bulk pumices, glassy matrices, and melt inclusions suggest that the Averno 2 eruption mainly resulted from successive extrusions of independent magma batches probably emplaced at depths of 2–4 km along regional fractures bordering the Neapolitan Yellow Tuff caldera.     

Pre- and syn-eruptive degassing and crystallisation processes of the 2010 and 2006 eruptions of Merapi volcano,Indonesia

The 2010 eruption of Merapi (VEI 4) was the volcano’s largest since 1872. In contrast to the prolonged and effusive dome-forming eruptions typical of Merapi’s recent activity, the 2010 eruption began explosively, before a new dome was rapidly emplaced. This new dome was subsequently destroyed by explosions, generating pyroclastic density currents (PDCs), predominantly consisting of dark coloured, dense blocks of basaltic andesite dome lava. A shift towards open-vent conditions in the later stages of the eruption culminated in multiple explosions and the generation of PDCs with conspicuous grey scoria and white pumice clasts resulting from sub-plinian convective column collapse. This paper presents geochemical data for melt inclusions and their clinopyroxene hosts extracted from dense dome lava, grey scoria and white pumice generated during the peak of the 2010 eruption. These are compared with clinopyroxene-hosted melt inclusions from scoriaceous dome fragments from the prolonged dome-forming 2006 eruption, to elucidate any relationship between pre-eruptive degassing and crystallisation processes and eruptive style. Secondary ion mass spectrometry analysis of volatiles (H₂O, CO₂) and light lithophile elements (Li, B, Be) is augmented by electron microprobe analysis of major elements and volatiles (Cl, S, F) in melt inclusions and groundmass glass. Geobarometric analysis shows that the clinopyroxene phenocrysts crystallised at depths of up to 20 km, with the greatest calculated depths associated with phenocrysts from the white pumice. Based on their volatile contents, melt inclusions have re-equilibrated during shallower storage and/or ascent, at depths of ~0.6–9.7 km, where the Merapi magma system is interpreted to be highly interconnected and not formed of discrete magma reservoirs. Melt inclusions enriched in Li show uniform “buffered” Cl concentrations, indicating the presence of an exsolved brine phase. Boron-enriched inclusions also support the presence of a brine phase, which helped to stabilise B in the melt. Calculations based on S concentrations in melt inclusions and groundmass glass require a degassing melt volume of 0.36 km³ in order to produce the mass of SO₂ emitted during the 2010 eruption. This volume is approximately an order of magnitude higher than the erupted magma (DRE) volume. The transition between the contrasting eruptive styles in 2010 and 2006 is linked to changes in magmatic flux and changes in degassing style, with the explosive activity in 2010 driven by an influx of deep magma, which overwhelmed the shallower magma system and ascended rapidly, accompanied by closed-system degassing.     

Alkaline granites and Be (Phenakite-bertrandite) mineralization: An example of the Orot and Ermakovka deposits

The Orot (Or) and Ermakovka (Er) intrusions of aegirine granites with various resources of accompanying Be mineralization in Transbaikalia were studied to reproduce Be behavior during the crystallization and degassing of alkaline granite magma. Data on the petrography and geochemistry of the rocks and the microthermomety and microprobe analysis of fluid and melt inclusions in them indicate that the intrusions were formed by discrete magma portions derived from a single magmatic source during successive stages of its differentiation. The intrusions crystallized at temperatures higher than 1030–1070°C (Or) and 840–640°C (Er), and the melts contained elevated concentrations of H₂O and F: from 2.1 to 3.5% F and from <1 to 1% H₂O for the former intrusion and from 3.9 to 6.7% F and from <2.6 to 4.1% H₂O for the latter. Fluids were released from the magma during a late crystallization stage for the Orot intrusion and an intermediate stage for the Ermakovka intrusion. Early in the course of this process, the fluids were halide-sulfate brines with the Cl: F ratio higher for the Orot intrusion and lower for the Ermakovka intrusion. A temperature decrease resulted in the exsolution of the fluids into two immiscible phases, one of which contained low and the other high concentrations of salts. The magmatic brines and low-salinity solutions of both intrusions were enriched in Be (up to 1.1 g/kg), which is comparable with the concentration of this element in the emanations of Be-bearing pegmatites in the Pamirs and is manyfold higher than C _Be in magmatic fluids related to granite intrusions with W-Sn mineralization. The Be ore mineralization of the Orot and Ermakovka deposits was produced by solutions whose composition and Be concentrations were analogous to those in the low-salinity phase of the corresponding magmatic fluids. The brines of the Ermakovka intrusion were enriched in Mo (up to 17 g/kg) and, to a lesser extent, Mn, Ce, and La and produced uneconomic monazite-molybdenite ore mineralization. Based on available data and results of our calculations, we arrived at the conclusion that the very high alkali concentrations in the melts of both intrusions (ASI < 1), their high F concentrations (up to 4.1%), and the absence of magmatic Be-bearing minerals facilitated Be selective extraction by the separated fluids in the form of its most soluble F-complexes. The high oxidation of the melt predetermined the predominance of hexavalent S and Mo compounds, which could be efficiently extracted by the fluid phase in the form of sulfates and molybdates of alkali metals. The differences in the ore potentials of the Orot and Ermakovka intrusions were caused by the different H₂O, F, and perhaps, also Be concentrations in the parental melts, which was, in turn, caused by their different degrees of differentiation during the preintrusive stages of their magmatic evolution.     

Contrasting compositional trends of rocks and olivine-hosted melt inclusions from Cerro Negro volcano (Central America): implications for decompression-driven fractionation of hydrous magmas

Melt inclusions in olivine Fo_83–72 from tephras of 1867, 1971 and 1992 eruptions of Cerro Negro volcano represent a series of basaltic to andesitic melts of narrow range of MgO (5.6–8 wt %) formed by ~46 wt % fractional crystallization of olivine (~6 wt %), plagioclase (~27 wt %), pyroxene (~13 wt %) and magnetite (<1 wt %) from primitive basaltic melt (average SiO₂ = 49 wt %, MgO = 7.6 wt %, H₂O = 6 wt %) as it ascended to the surface from the depth of about 14 km. The crystallization occurred at increasing liquidus temperature from 1,050 to 1,090 °C in the pressure range from 400 to 50 MPa and was induced by release of mixed H₂O–CO₂ fluid from the melt at decreasing pressure. Matrix glass compositions fall at the high-Si end of the melt inclusion trend and represent the final stage of melt crystallization during and after eruption. The bulk compositions of erupted Cerro Negro magmas (tephras and lavas) range from high- to low-MgO (3–10 wt %) basalts, which form a compositional array crossing the trend of melt inclusions so that virtually no rock from Cerro Negro has composition akin to true melt represented by the inclusions. The variations of the bulk magma (rocks) and melt (melt inclusions) compositions can be generated in a dyke connecting a deep primitive magma reservoir with the Cerro Negro edifice. While the melt inclusions represent the compositional trend of instantaneous melts along the magma pathway at decreasing pressure and H₂O content, occurrence of low-Mg to high-Mg basalts reflects the process of phenocryst re-distribution in progressively evolving melt. The crystallization scenario is anticipated to operate everywhere in dykes feeding basaltic volcanoes and can explain the predominance of plagioclase-rich high-Al basalts in island arc as well as typical compositional variations of magmas during single eruptions.     

Experimental Constraints on the Origin of the 1991 Pinatubo Dacite

Crystallization (dacite) and interaction (dacite–peridotite)experiments have been performed on the 1991 Pinatubo dacite(Luzon Island, Philippines) to constrain its petrogenesis. Inthe dacite–H₂O system at 960 MPa, magnetite and eitherclinopyroxene (low H₂O) or amphibole (high H₂O) are the liquidusphases. No garnet is observed at this pressure. Dacite–peridotite interaction at 920 MPa produces massive orthopyroxenecrystallization, in addition to amphibole ± phlogopite.Amphibole crystallizing in dacite at 960 MPa has the same compositionas the aluminium-rich hornblende preserved in the cores of amphibolephenocrysts in the 1991 dacite, suggesting a high-pressure stageof dacite crystallization with high melt H₂O contents (>10wt %) at relatively low temperature (<950°C). The compositionsof plagioclase, amphibole and melt inclusion suggest that thePinatubo dacite was water-rich, oxidized and not much hotterthan 900°C, when emplaced into the shallow magma reservoirin which most phenocrysts precipitated before the onset of the1991 eruption. The LREE-enriched REE pattern of the whole-rockdacite demands garnet somewhere during its petrogenesis, whichin turn suggests high-pressure derivation. Partial melting ofsubducted oceanic crust yields melts unlike the Pinatubo dacite.Interaction of these slab melts with sub-arc peridotite is unableto produce a Pinatubo type of dacite, nor is a direct mantleorigin conceivable on the basis of our peridotite–daciteinteraction experimental results. Dehydration melting of underplatedbasalts requires unrealistically high temperatures and doesnot yield dacite with the low FeO/MgO, and high H₂O, Ni andCr contents typical of the Pinatubo dacite. The most plausibleorigin of the Pinatubo dacite is via high-pressure fractionationof a hydrous, oxidized, primitive basalt that crystallized amphiboleand garnet upon cooling. Dacite melts produced in this way weredirectly expelled from the uppermost mantle or lower crust toshallow-level reservoirs from which they erupted occasionally.Magmas such as the Pinatubo dacite may provide evidence forthe existence of particularly H₂O-rich conditions in the sub-arcmantle wedge rather than the melting of the young, hot subductingoceanic plate. KEY WORDS: Pinatubo dacite; slab melt; experimental petrology; arc magmas     

Contribution of mafic melt to porphyry copper mineralization: evidence from Mount Pinatubo, Philippines, and Bingham Canyon, Utah, USA

Mount Pinatubo in the Philippines, known for its cataclysmic eruption in 1991, hosts several porphyry copper deposits and active geothermal systems. An underlying mafic melt supplied much of the sulphur for the dacitic magma and its injection into the dacitic magma chamber triggered the eruption. The eruption caused purging of the sulphur-rich fluid from the dacite to the atmosphere and extensive fracturing. Similar events took place at Bingham Canyon, Utah, site of the largest copper and gold deposit in North America at 38 Ma. The Bingham Canyon mineralization took place beneath an active stratovolcano and pyroclastic flows contemporaneous with the mineralization show evidence for magma mingling. Ascent of mafic melt supplied sulphur and chalcophile elements to the felsic magma, which consolidated to form the Bingham stock and its underlying magma chamber. Injections of the mafic melt caused periodic eruptions of felsic magma to form the stratovolcano and deposition of sulphide minerals in highly fractured rocks in and around the stock.     

Meimechites, porphyritic alkaline picrites, and melanephelinites of Siberia: Conditions of crystallization, parental magmas, and sources

The investigation of rocks, minerals, and melt inclusions showed that porphyritic alkaline picrites and meimechites crystallized from different parental magmas. At a similar ultrabasic composition, the alkaline picrite melts were enriched in K₂O relative to Na₂O, and contained up to 0.12–0.13 wt % F and less Cr, Ni, and H₂O (only 0.01–0.16 wt % H₂O, versus 0.6–1.6 wt % in the meimechite melts) compared with the meimechite magmas. The crystallization of alkaline picrite melts occurred under stable conditions at relatively low temperatures without abrupt changes: olivine and clinopyroxene crystallized at 1340–1285 and 1230–1200°C, respectively, as compared with 1600–1450 and 1230–1200°C in the meimechites. The alkaline picrite melts evolved toward melanephelinite, nephelinite, tephrite, and trachydolerite; whereas the meimechite magmas gave rise to subalkaline picritic rocks. The partitioning of vanadium between olivine and melt suggests that the meimechite magma crystallized under more oxidizing conditions compared with the alkaline picrite melts: the K_DV values for the meimechite melts (0.011–0.016) were three times lower than those for the alkaline picrite melts (0.045–0.052). The parental magmas of the alkaline picrites and meimechites were enriched in trace elements relative to mantle levels by factors of tens to hundreds. The alkaline picrite magma showed lower LILE and LREE contents compared with the meimechite magma. The magmas had also different indicator ratios of incompatible elements, including those immobile in aqueous fluids. It was concluded that the meimechite and alkaline picrite melts were derived from different mantle sources. The former were generated at lower degrees of melting of an undepleted mantle source, and the meimechite melts were produced by high-degree melting of a probably lherzolite-harzburgite source.     

Magmatic Evolution of Changbaishan Tianchi Volcano,China–North Korea: Evidence from Mineral-Hosted Melt and Fluid Inclusions

Data on mineral-hosted melt, fluid, and crystalline inclusions were used to study the composition and evolution of melts that produced rocks of Changbaishan Tianchi volcano, China–North Korea, and estimate their crystallization parameters. The melts crystallized within broad ranges of temperature (1220–700°C) and pressure (3100–1000 bar), at a drastic change in the redox potential: Δ log \(f_{O_2}\) from NNO + 0.92 to +1.42 for the basalt melts, NNO –1.61 to –2.09 for the trachybasaltic andesite melts, NNO –2.63 to –1.89 for the comendite melts, and NNO –1.55 to –3.15 for the pantellerite melts. The paper reports estimates of the compositions of melts that produced the continuous rock series from trachybasalt to comendite and pantellerite. In terms of trace-element concentrations, all of the mafic melts are comparable with OIB magmas. The silicic melts are strongly enriched in trace elements and REE. The most strongly enriched melts contain concentrations of certain elements almost as high as in ores of these elements. The paper reports data on H2O concentrations in melts of different composition. It is demonstrated that the variations in the H₂O concentrations were controlled by magma degassing. Data are reported on the Sr and Nd composition of the rocks. The deviations in the Sr isotopic composition are proportional to the ⁸⁷Sr/⁸⁶Sr ratio and could be produced in a melt with a high enough ⁸⁷Sr/⁸⁶Sr ratio during a geologically fairly brief time period. The evolution of melts that produced rocks of the volcano was controlled by crystallization differentiation of the parental basalt magmas at insignificant involvement of melt mixing and liquid immiscibility of silicate and sulfide melts. The alkaline salic rocks were generated in shallow-sitting (13–3.5 km) magmatic chambers in which the melts underwent profound differentiation that gave rise to pantellerites and comendites strongly enriched in trace elements (Th, Nb, Ta, Zr, and REE). Data on the composition of the magmas and parameters of their derivation are used to develop a generalized petrologic–geodynamic model for the origin of Changbaishan Tianchi volcano.     

Trace Elements in Alkaline Lamprophyres,Clinopyroxene, and Amphibole of the Tomtor Massif and the Ore Potential of the Melts

Data obtained on lamprophyres from the carbonatite–volcanic unit in the lower horizon of the Tomtor Massif indicate that the rocks and zoned diopside and kaersutite phenocrysts in them are enriched in incompatible elements more significantly than is typical of alkaline ultramafic rocks of the Maymecha–Kotui and Kola provinces. The concentrations of these elements and their indicator ratios in the cores and intermediate zones of the diopside and kaersutite phenocrysts significantly vary, and this suggests that the minerals might have crystallized from different melts. This is consistent with the earlier conclusions, which were derived from studying melt inclusions, that the phenocrysts crystallized from mixing alkaline mafic melts of sodic and potassic types and different Mg–number which were enriched in the carbonatite component. The cores of the diopside phenocrysts started to crystallize from sodic mafic magma in a magmatic chamber, while the intermediate and outermost zones of this mineral crystallized from mixed sodic–potassic mafic melts. The carbonatite component was separated from the sodic mafic melt at high temperature (>1150°C) during diopside core crystallization. The bulk compositions of the alkaline lamprophyres and of the diopside and kaersutite phenocrysts contain lower normalized concentrations of HREE than LREE. This led us to conclude that the parental sodic and potassic mafic melts were derived from an enriched mantle source material under garnet–facies parameters, as is typical of continental rifts. It is noteworthy that the potassic mafic melt was derived at greater depths and lower degrees of melting of the mantle source than the sodic melt. The iron–rich sodic melt from which the cores of the diopside phenocrysts started to crystallize was enriched in V, REE, Y, and volatile components (H₂O, CO₂, F, Cl, and S). The onset of carbonate–silicate liquid immiscibility was marked by the redistribution of REE and Y into the carbonatite melt. The potassic, more Mg–rich mafic melt from which the intermediate and outermost zones of the diopside phenocrysts crystallized was enriched in Ti, Nb, Zr, and REE and always remained homogeneous when this mineral crystallized.     

Deep differentiation of alkali ultramafic magmas: Formation of carbonatite melts

The study of melt microinclusions in olivine megacrysts from meimechites and alkali picrites of the Maimecha–Kotui alkali ultramafic and carbonatite province (Polar Siberia) revealed that the melt compositions corrected for loss of olivine due to post-entrapment crystallization of olivine on inclusion walls (differentiates of primary meimechite magma) match well to the composition of nephelinites and olivine melilitites belonging to carbonatite magmatic series. Modeling of fractional crystallization of meimechite magmas results in the high-alkali melt compositions corresponding to the silicate–carbonate liquid immiscibility field. The appearance of volatile-rich melts at the base of magma-generating plume systems at early stages of partial melting can be explained by extraction of incompatible elements including volatiles, by near-solidus melts at low degrees of partial melting, and meimechites are an example of such magmas. Subsequent accumulation of CO₂ in the residual melt results in generation of carbonate magma.     

Crystallization conditions of the alkaline-basic dike from the Yllymakh Massif,Central Aldan: Evidence from melt inclusion data in minerals

Alkaline-basic dike from the Yllymakh Massif (Central Aldan) has been studied. Its partially crystallized matrix contains corroded phenocrysts of olivine and hypidiomorphic phenocrysts of clinopyroxene and pseudo-, epileucite. It was found that phenocrysts of clinopyroxene contain abundant primary inclusions, Ti-magnetite and apatite bear only single inclusions, whereas olivine is enriched in secondary inclusions, which are confined to the cleavage of host mineral (along second and third pinacoids) and its cracks. The homogenization temperatures of the primary inclusions in clinopyroxene and secondary inclusions in olivine are approximately equal and lie within 1260–1240°C. The compositions of melt inclusions in olivine and clinopyroxene are also similar and corresponded to the malignite-pseudoleucite phonolite-monzonite pulaskites, which are developed at the Yllymakh Massif. Unheated inclusions in apatite and Ti-magnetite compositionally approach monzonites and nepheline syenites—tinguaites, respectively. It was concluded that the alkaline basaltoid magma was presumably parental magma for the entire rock complex of the Yllymakh Massif. Its crystallization and differentiation presumably provided all observed rock variety from ultrabasics (early derivatives located at depth) and malignites (later derivatives) to leucite phonolites, monzonites, and alkaline pulaskites, which were obtained during subsequent stages of the melt evolution. The parental magma, and especially its derivatives, were enriched in BaO (0.8–0.1 wt %), Cl (0.1–0.3 wt %) and trace elements (primarily, LREE and MREE), which are several times higher than mantle values. At the same time, ion microprobe (SIMS) study showed that derivative melts were dry: contained only 0.01–1.13 wt % H₂O. The trend of melts conserved in the minerals and the massif rocks corresponds to the evolution of alkalinebasaltoid magma with increase in Si, Al, alkalis and decrease in Mg, Ca, and Fe, i.e. the Bowen trend. The considered alkaline-basic dike was presumably formed from the derivative of leucite-phonolite melt, which during emplacement captured olivine xenocrysts from previously fractionated ultrabasic rocks. The parental magma was presumably derived by high-degree melting of garnet-spinel-facies depleted mantle at some influence of crustal material.     

Genesis of mineralized cavities (Miaroles) in granitic pegmatites and granites

Analysis the development of large fluid segregations in a flux of small fluid bubbles during the degassing of granitic (pegmatitic) melts indicates that the velocity of the buoyant ascent of fluid bubbles depends on their sizes, the viscosity and density of the melts, and the duration of melt flow. Possible variants of the primary and secondary boiling of magma are discussed depending on the P-T conditions and concentrations of H₂O, F, B, and other components dissolved in the magma. The possible density ranges of the fluid phases are considered, along with the viscosity and density of granitic (pegmatitic) melts, velocities of the buoyant ascent of fluid bubbles in them, and the processes of their coalescence and accumulation in the temperature range of 650–850°C. Provisional evaluates are obtained for the duration of melt crystallization and the development of intrusive massifs and dikes of granites and syngenetic intragranite and epigenetic (intruded into the host rocks) granite pegmatites. Simulation data and geological observations suggest that large fluid segregations were formed already in the magma chambers in which the heterogeneous granite (pegmatitic) magma was derived, before its emplacement into the host rocks. These generation regions could be magma chamber areas within granite intrusions, in which melts enriched in volatiles were accumulated and then degassed with the release of fluid phases of various composition and density. The crystallization of fluid-rich melts under favorable conditions gives rise to granites with miarolitic structures. The emplacement of heterogeneous pegmatitic magma (which consists of immiscible silicate melts and large fluid segregations) into the host rocks results in that these segregations (would-be miaroles) occur in any part of the pegmatite-hosting chamber. This explains why miaroles of significantly different composition and with broadly varying proportions of their filling minerals may occur in various parts of pegmatite veins or their swells, as well as near contacts with the host rocks.     

Mafic pyroclastic flows at Santa Maria (Gaua) Volcano, Vanuatu: the caldera formation problem in mainly mafic island arc volcanoes

At Santa Maria Volcano (New Hebrides island arc), extensive ash and scoria flow deposits overlie the mainly effusive, pre-caldera cone. Hydromagmatic features characterize these deposits, the composition of juvenile clasts ranges from basalt to acid andesite/dacite (SiO₂= 51–63.6%) with a dominant basaltic composition. The stratigraphic position of this pyroclastic series and its spatial distribution around a 8.5 km × 6 km wide caldera provide evidence of a relationship between this series and the caldera formation. In addition, these pyroclastic deposits are co-genetic to parasitic cones and lava flows developed along faults concentric to the caldera. Both series result from a compositionally layered magma reservoir, the subordinate differentiated magmas being the result of fractional crystallization from the basalts. A model of caldera formation which implies a large hydromagmatic eruption at the central vent and minor magma withdrawal by flank eruptions is proposed. This model emphasizes the importance of mafic hydroclastic eruptions in the caldera forming event and contradicts a model implying only quiet subsidence, a process often proposed for the formation of calderas in island are volcanoes of mainly mafic composition.     

Physicochemical parameters of crystallization of melts in intermediate suprasubduction chambers (by the example of Tolbachik and Ichinskii Volcanoes,Kamchatka Peninsula)

In study of plagioclases, amphiboles, and melt inclusions, we have determined the physicochemical parameters of crystallization of melts in the intermediate suprasubduction chambers of volcanoes representing different types of subduction magmatism on the Kamchatka Peninsula: the young basaltic systems of Tolbachik Volcano (Klyuchevskaya group) and ancient Ichinskii Volcano (Sredinnyi Ridge) with alternating basaltic and felsic eruptions. For Tolbachik Volcano, we have found that plagioclase lapilli formed from basaltic melts at 1075-1115 °C and low (< 1 kbar) pressures at depths of 2-3 km. Andesite minerals crystallized within a wider range of temperatures and pressures (1220-1020 °C and 3.3-1.6 kbar) in an intermediate chamber at depths of < 10 km. The melts were generated in basaltic magma chambers (detected well by geophysical methods at depths of 18-20 km) with minimum temperatures of ~ 1290 °C. For Ichinskii Volcano, three levels of intermediate chambers are distinguished. Andesites formed at depths of < 23 km at < 1225 °C. Dacitic melts were generated from an intermediate chamber (14 km) at 1135-1045 °C as a result of differentiation of andesitic magmas. Dacites formed in the uppermost horizons (9-3 km) at 1130-1030 °C. Despite the similarity between differentiation processes in the intermediate chambers of the Kamchatka volcanoes, each volcano is characterized by specific magmatism. The lavas of basaltic volcanoes (Tolbachik) and those of andesitic volcanoes (Ichinskii) differ in genesis and differentiation.     

Textural and compositional evidence for magma mixing and its mechanism,Abu volcano group,southwestern Japan

Quaternary basalts, andesites and dacites from the Abu monogenetic volcano group, SW Japan, (composed of more than 40 monogenetic volcanoes) show two distinct chemical trends especially on the FeO^*/MgO vs SiO₂ diagram. One trend is characterized by FeO^*/MgO-enrichment with a slight increase in SiO₂ content (Fe-type trend), whereas the other shows a marked SiO₂-enrichment with relatively constant FeO^*/MgO ratios (Si-type trend). The Fe-type trend is explained by fractional crystallization with subtraction of olivine and augite from a primitive alkali basalt magma. Rocks of the Si-type trend are characterized by partially melted or resorbed quartz and sodic plagioclase phenocrysts and/or fine-grained basaltic inclusions. They are most likely products of mixing of a primitive alkali basalt magma containing olivine phenocrysts with a dacite magma containing quartz, sodic plagioclase and hornblende phenocrysts. Petrographic variation as well as chemical variation from basalt to dacite of the Si-type trend is accounted for by various mixing ratios of basalt and dacite magmas. Pargasitic hornblende and clinopyroxene phenocrysts in andesite and dacite may have crystallized from basaltic magma during magma mixing. Olivine and spinel, and quartz, sodic plagioclase and common hornblende had crystallized in basaltic and dacitic magmas, respectively, before the mixing. Within a lava flow, the abundance of basaltic inclusions decreases from the area near the eruptive vent towards the perimeter of the flow, and the number of resorbed phenocrysts varies inversely, suggesting zonation in the magma chamber.The mode of mixing changes depending on the mixing ratio. In the mafic mixture, basalt and dacite magmas can mix in the liquid state (liquid-liquid mixing). In the silicic mixture, on the other hand, the basalt magma was quenched and formed inclusions (liquid-solid mixing). During mixing, the disaggregated basalt magma and the host dacite magma soon reached thermal equilibrium. Compositional homogenization of the mixed magma can occur only when the equilibrium temperature is sufficiently above the solidus of the basalt magma. The Si-type trend is chemically and petrographically similar to the calc-alkalic trend. Therefore, a calc-alkalic trend which is distinguished from a fractional crystallization trend (e.g. Fe-type trend) may be a product of magma mixing.     

Magmatic processes in the Bishop Tuff rhyolitic magma based on trace elements in melt inclusions and pumice matrix glass

To investigate the origin of compositional zonation in the Bishop Tuff magma body, we have analyzed trace elements in the matrix glass of pumice clasts and in quartz-hosted melt inclusions. Our results show contrasting patterns for quartz in different parts of the Bishop Tuff. In all samples from the early part of the eruption, trace element compositions of matrix glasses are similar to but slightly more evolved than quartz-hosted melt inclusions. This indicates a cogenetic relationship between quartz crystals and their surrounding matrix glass, consistent with in situ crystallization. The range of incompatible element concentrations in melt inclusions and matrix glass from single pumice clasts requires 16–20 wt% in situ crystallization. This is greater than the actual crystal content of the pumices (<15 % crystals). In contrast to the pattern for the early pumices, pyroclastic flow samples from the middle part of the eruption show contrasting trends: In some clasts, the matrix is more evolved than the inclusions, whereas in other clasts, the matrix is less evolved. In the late Bishop Tuff, all crystal-rich samples have matrix glasses that are less evolved than the melt inclusions. Trace element abundances indicate that the cores of quartz in the late Bishop Tuff crystallized from more differentiated rhyolitic magma that was similar in many ways, yet distinct from the early-erupted Bishop Tuff. Our results are compatible with a model of secular incremental zoning (Hildreth and Wilson in Compositional zoning of the Bishop Tuff. J Petrol 48(5):951–999, 2007), in which melt batches from underlying crystal mush rise to various levels in a growing magma body according to their buoyancy. Early- and middle-erupted quartz crystallized from highly evolved rhyolitic melt, but then some parts of the middle-erupted magma were invaded by less differentiated rhyolite such that the matrix melt at the time of eruption was less evolved than the melt inclusions. A similar process occurred but to a greater extent in magma that erupted to form the late Bishop Tuff. In addition, there was a final, major magma mixing event in the late magma that formed Ti-rich rims on quartz and Ba-rich rims on sanidine, trapped less evolved rhyolitic melt inclusions, and resulted in dark and swirly crystal-poor pumice that is a rare type throughout much of the Bishop Tuff.