Thiadiamondoids as proxies for the extent of thermochemical sulfate reduction

Thiadiamondoids have been analyzed in a suite of Smackover-derived oils from the US Gulf Coast to determine whether their abundance and distribution reflect alteration by thermochemical sulfate reduction (TSR). The sample suite includes oils and condensates having various thermal maturities that are characterized as being unaltered by TSR, altered by TSR, or of uncertain affinities due to inconsistencies between conventional geochemical indicators of TSR. Nearly all samples contain thiadiamondoids, indicating that small amounts of these compounds can be generated from sulfur rich kerogen. TSR results in the generation of H₂S, sulfides and thiophenic aromatic hydrocarbons, either by reaction with sulfate or by back reactions with the evolved H₂S. Evidence shows that thiadiamondoids originate exclusively from reactions involving TSR. Once generated, their high thermal stability permits thiadiamondoids to accumulate with little further reaction and their abundance reflects not only the occurrence of TSR, but the extent of the alteration. The abundance of thiaadamantanes (1-cage structures) is particularly diagnostic of the onset of TSR. Examination of condensates from reservoirs >180 °C indicates that the thiadiamondoids can be thermally degraded. They are more thermally stable than the dibenzothiophenes, but are less stable than diamondoid hydrocarbons. Their stability appears to increase with increasing cage number, suggesting that the thiatriamantanes are the best proxy for the extent of TSR alteration in very high temperature reservoirs. Polythiadiamondoids (diamondoids with multiple sulfur substitutions) were detected in trace amounts and are also indicators of TSR.     

Experimental investigation on thermochemical sulfate reduction by H2S initiation

Hydrogen sulfide (H₂S) is known to catalyze thermochemical sulfate reduction (TSR) by hydrocarbons (HC), but the reaction mechanism remains unclear. To understand the mechanism of this catalytic reaction, a series of isothermal gold-tube hydrous pyrolysis experiments were conducted at 330 °C for 24 h under a constant confining pressure of 24.1 MPa. The reactants used were saturated HC (sulfur-free) and CaSO₄ in the presence of variable H₂S partial pressures at three different pH conditions. The experimental results showed that the in-situ pH of the aqueous solution (herein, in-situ pH refers to the calculated pH of aqueous solution under the experimental conditions) can significantly affect the rate of the TSR reaction. A substantial increase in the TSR reaction rate was recorded with a decrease in the in-situ pH value of the aqueous solution involved. A positive correlation between the rate of TSR and the initial partial pressure of H₂S occurred under acidic conditions (at pH ∼3-3.5). However, sulfate reduction at pH ∼5.0 was undetectable even at high initial H₂S concentrations. To investigate whether the reaction of H₂S_(aq) and occurs at pH ∼3, an additional series of isothermal hydrous pyrolysis experiments was conducted with CaSO₄ and variable H₂S partial pressures in the absence of HC at the same experimental temperature and pressure conditions. CaSO₄ reduction was not measurable in the absence of paraffin even with high H₂S pressure and acidic conditions. These experimental observations indicate that the formation of organosulfur intermediates from H₂S reacting with hydrocarbons may play a significant role in sulfate reduction under our experimental conditions rather than the formation of elemental sulfur from H₂S reacting with sulfate as has been suggested previously (Toland W. G. (1960) Oxidation of organic compounds with aqueous sulphate. J. Am. Chem. Soc.82, 1911-1916).Quantification of labile organosulfur compounds (LSC), such as thiols and sulfides, was performed on the products of the reaction of H₂S and HC from a series of gold-tube non-isothermal hydrous pyrolysis experiments conducted at about pH 3 from 300 to 370 °C and a 0.1-°C/h heating rate. Incorporation of sulfur into HC resulted in an appreciable amount of thiol and sulfide formation. The rate of LSC formation positively correlated with the initial H₂S pressure. Thus, we propose that the LSC produced from H₂S reaction with HC are most likely the reactive intermediates for H₂S initiation of sulfate reduction. We further propose a three-step reaction scheme of sulfate reduction by HC under reservoir conditions, and discuss the geological implications of our experimental findings with regard to the effect of formation water and oil chemistry, in particular LSC content.     

硫酸盐热化学还原作用对原油裂解成气和碳酸盐岩储层改造的影响及作用机制

硫酸盐热化学还原作用(Thermochemical sulfate reduction, TSR)是发生在油气藏中复杂的有机-无机相互作用,它不仅会引起含H₂S天然气的富集,其产生的酸性气体对碳酸盐岩储层还具有明显的溶蚀改造作用。本文基于黄金管热模拟实验,研究了TSR反应对原油裂解气的生成的影响,发现这种氧化还原反应的存在能明显降低原油的稳定性,促进具高干燥系数的含H₂S天然气的生成。结合原位激光拉曼实验结果,证实了实际油藏中启动TSR反应的最可行的氧化剂应该是硫酸盐接触离子对(CIP)。全面探讨了影响TSR反应的地质和地球化学因素,提出除了初始原油的组分特征、不稳定含硫化合物(LSC)的含量外,地层水的含盐类型及盐度同样是控制TSR反应的关键因素。同时,基于大量地质分析,发现TSR对碳酸盐岩储层具有明显的溶蚀改造作用。结合溶蚀模拟实验,提出了酸性流体对碳酸盐储层溶蚀改造的机制,且深层碳酸盐岩层存在一个由TSR作用形成的次生孔隙发育带。研究认为,烃类与硫酸盐矿物的氧化还原反应与其产物对碳酸盐岩储层的改造是TSR作用的两个不可分割的部分,它们相互依存和制约。     

Experimental investigation on thermochemical sulfate reduction in the presence of 1-pentanethiol at 200 and 250 °C: Implications for in situ TSR processes occurring in some MVT deposits

Organic sulfur compounds are ubiquitous in natural oil and gas fields and moderate-low temperature sulfide ore deposits. Previous studies have shown that organic sulfur compounds are important in enhancing the rates of thermochemical sulfate reduction (TSR) reactions, but the details of these reaction mechanisms remain unclear. In order to assess the extent of sulfate reduction in the presence of labile sulfur species at temperature conditions near to those where TSR occurs in nature, we conducted a series of experiments using the fused silica capillary capsule (FCSS) method. The tested systems containing labile sulfur species are MgSO₄ + 1-pentanethiol (C₅H₁₁SH) + 1-octene (C₈H₁₆), MgSO₄ + 1-octene (C₈H₁₆), MgSO₄ + 1-pentanethiol (C₅H₁₁SH), 1-pentanethiol (C₅H₁₁SH)+H₂O, and MgSO₄ + 1-pentanethiol (C₅H₁₁SH) + ZnBr₂ systems. Our results show that: (1) intermediate oxidized carbon species (ethanol and acetic acid) are formed during TSR simulation experiments when 1-pentanethiol is present; (2) in the presence of ZnBr₂, 1-pentanethiol can be oxidized by sulfate to CO₂ at 200 °C, which is within the temperature range observed in natural TSR; and (3) the precipitation of sulfide minerals may significantly promote the rate of TSR, indicating that the rates of in situ TSR reactions in ore deposits could be much faster than previously thought. This may be important for understanding the possibility of in situ TSR as a mechanism for the precipitation of metal sulfides in some ore deposits. These findings provide important experimental evidence for understanding the role of organic sulfur compounds in TSR reactions and the pathway of TSR reactions initiated by organic sulfur compounds under natural conditions.     

The role of labile sulfur compounds in thermochemical sulfate reduction

The reduction of sulfate to sulfide coupled with the oxidation of hydrocarbons to carbon dioxide, commonly referred to as thermochemical sulfate reduction (TSR), is an important abiotic alteration process that most commonly occurs in hot carbonate petroleum reservoirs. In the present study we focus on the role that organic labile sulfur compounds play in increasing the rate of TSR. A series of gold-tube hydrous pyrolysis experiments were conducted with n-octane and CaSO₄ in the presence of reduced sulfur (e.g. H₂S, S°, organic S) at temperatures of 330 and 356 °C under a constant confining pressure. The in-situ pH was buffered to 3.5 (∼6.3 at room temperature) with talc and silica. For comparison, three types of oil with different total S and labile S contents were reacted under similar conditions. The results show that the initial presence of organic or inorganic sulfur compounds increases the rate of TSR. However, organic sulfur compounds, such as 1-pentanethiol or diethyldisulfide, were significantly more effective in increasing the rate of TSR than H₂S or elemental sulfur (on a mole S basis). The increase in rate is achieved at relatively low concentrations of 1-pentanethiol, less than 1 wt% of the total n-octane, which is comparable to the concentration of organic S that is common in many oils (∼0.3 wt%). We examined several potential reaction mechanisms to explain the observed reactivity of organic LSC. First, the release of H₂S from the thermal degradation of thiols was discounted as an important mechanism due to the significantly greater reactivity of thiol compared to an equivalent amount of H₂S. Second, we considered the generation of olefines in association with the elimination of H₂S during thermal degradation of thiols because olefines are much more reactive than n-alkanes during TSR. In our experiments, olefines increased the rate of TSR, but were less effective than 1-pentanethiol and other organic LSC. Third, the thermal decomposition of organic LSC creates free-radicals that in turn might initiate a radical chain-reaction that creates more reactive species. Experiments involving radical initiators, such as diethyldisulfide and benzyldisulfide, did not show an increase in reactivity compared to 1-pentanethiol. Therefore, we conclude that none of these can sufficiently explain our observations of the initial stages of TSR; they may, however, be important in the later stages. In order to gain greater insight into the potential mechanism for the observed reactivity of these organic sulfur compounds during TSR, we applied density functional theory-based molecular modeling techniques to our system. The results of these calculations indicate that 1-pentanethiol or its thermal degradation products may directly react with sulfate and reduce the activation energy required to rupture the first S-O bond through the formation of a sulfate ester. This study demonstrates the importance of labile sulfur compounds in reducing the onset timing and temperature of TSR. It is therefore essential that labile sulfur concentrations are taken into consideration when trying to make accurate predictions of TSR kinetics and the potential for H₂S accumulation in petroleum reservoirs.     

Gas genetic type and origin of hydrogen sulfide in the Zhongba gas field of the western Sichuan Basin, China

Natural gases and associated condensate oils from the Zhongba gas field in the western Sichuan Basin, China were investigated for gas genetic types and origin of H₂S by integrating gaseous and light hydrocarbon geochemistry, formation water compositions, S isotopes (δ³⁴S) and geological data. There are two types of natural gas accumulations in the studied area. Gases from the third member of the Middle Triassic Leikoupo Formation (T₂l³) are reservoired in a marine carbonate sequence and are characterized by high gas dryness, high H₂S and CO₂ contents, slightly heavy C isotopic values of CH₄ and widely variable C isotopic values of wet gases. They are highly mature thermogenic gases mainly derived from the Permian type II kerogens mixed with a small proportion of the Triassic coal-type gases. Gases from the second member of the Upper Triassic Xujiahe Formation (T₃x²) are reservoired in continental sandstones and characterized by low gas dryness, free of H₂S, slightly light C isotopic values of CH₄, and heavy and less variable C isotopic values of wet gases. They are coal-type gases derived from coal in the Triassic Xujiahe Formation.The H₂S from the Leikoupo Formation is most likely formed by thermochemical SO₄ reduction (TSR) even though other possibilities cannot be fully ruled out. The proposed TSR origin of H₂S is supported by geochemical compositions and geological interpretations. The reservoir in the Leikoupo Formation is dolomite dominated carbonate that contains gypsum and anhydrite. Petroleum compounds dissolved in water react with aqueous SO₄ species, which are derived from the dissolution of anhydrite. Burial history analysis reveals that from the temperature at which TSR occurred it was in the Late Jurassic to Early Cretaceous and TSR ceased due to uplift and cooling thereafter. TSR alteration is incomplete and mainly occurs in wet gas components as indicated by near constant CH₄ δ¹³C values, wide range variations of ethane, propane and butane δ¹³C values, and moderately high gas dryness. The δ³⁴S values in SO₄, elemental S and H₂S fall within the fractionation scope of TSR-derived H₂S. High organo-S compound concentrations together with the occurrence of 2-thiaadamantanes in the T₂l reservoir provide supplementary evidence for TSR related alteration.     

硫酸盐热化学还原作用的启动机制研究

硫酸盐热化学还原作用(TSR)是导致高含硫化氢天然气生成和聚集、碳酸岩盐储层酸化和溶蚀的重要因素,是地质盆地内烃-水-岩三者之间的复杂反应。本文利用黄金管热模拟实验,对TSR反应的可能启动机制及控制因素进行了研究。通过不同盐溶液与原油的热解实验,证实了硫酸盐的存在是启动TSR反应的必要因素,MgSO4比CaSO4和Na2SO4更容易启动TSR反应,体系中盐度的增加会加速H2S的生成。实验结果表明,不同水介质条件下,TSR反应的程度与溶液的离子强度呈正相关,弱酸性环境并不足以启动TSR反应;原油中不稳定含硫化合物的含量越高越有利于TSR反应的发生,饱和链烷烃比原油中其它组分更容易引发TSR反应,且大分子烷烃比小分子烷烃更容易被硫酸盐氧化。     

Proto-solid bitumen in petroleum altered by thermochemical sulfate reduction

Thermochemical sulfate reduction (TSR) involves a complex series of redox reactions whereby petroleum is oxidized by sulfate forming H₂S and CO_2. A highly aromatic, sulfur rich carbonaceous residue, which we define as TSR-solid bitumen, is commonly seen in reservoir rocks where TSR has occurred. Using atmospheric pressure photoionization (APPI) Fourier transform ion cyclotron resonance (FTICR) mass spectrometry, we find that TSR altered oils and condensates contain highly condensed polynuclear aromatic and naphthenoaromatic species with 0–3 S atoms. These chemical species are not present in petroleum fluids of equivalent maturity that have not experienced TSR and must have been formed by the TSR process. We call these species proto-solid bitumen as they represent the type of organic compounds that could easily precipitate from the TSR altered oils with slight chemical alteration or changes in reservoir conditions.     

Thermochemical Sulfate Reduction in the Tazhong District,Tarim Basin,Northeast China: Evidence from Formation Water and Natural Gas Geochemistry

<正>Systematic analyses of the formation water and natural gas geochemistry in the Central Uplift of the Tarim Basin(CUTB) show that gas invasion at the late stage is accompanied by an increase of the contents of H_2S and CO_2 in natural gas,by the forming of the high total dissolved solids formation water,by an increase of the content of HCO_3~-,relative to Cl~-,by an increase of the 2nd family ions(Ca~(2+),Mg~(2+),Sr~(2+) and Ba~(2+)) and by a decrease of the content of SO_4~(2-),relative to Cl~-.The above phenomena can be explained only by way of thermochemical sulfate reduction(TSR).TSR often occurs in the transition zone of oil and water and is often described in the following reaction formula:ΣCH+CaSO_4+H-_2O→H_2S+CO_2+CaCO_3.(1) Dissolved SO_4~(2-) in the formation water is consumed in the above reaction,when H_2S and CO_2 are generated,resulting in a decrease of SO_4~(2-) in the formation water and an increase of both H_2S and CO_2 in the natural gas.If formation water exists, the generated CO_2 will go on reacting with the carbonate to form bicarbonate,which can be dissolved in the formation water,thus resulting in the enrichment of Ca~(2+) and HCO_3~-.The above reaction can be described by the following equation:CO_2+H_2O+CaCO_3→Ca~(2+)+2HCO_3~-.The stratigraphic temperatures of the Cambrian and lower Ordovician in CUTB exceeded 120℃,which is the minimum for TSR to occur.At the same time,dolomitization,which might be a direct result of TSR,has been found in both the Cambrian and the lower Ordovician.The above evidence indicates that TSR is in an active reaction,providing a novel way to reevaluate the exploration potentials of natural gas in this district.     

Enrichment of nitrogen and 13C of methane in natural gases from the Khuff Formation,Saudi Arabia,caused by thermochemical sulfate reduction

Permian Khuff reservoirs along the east coast of Saudi Arabia and in the Arabian Gulf produce dry sour gas with highly variable nitrogen concentrations. Rough correlations between N₂/CH₄, CO₂/CH₄ and H₂S/CH₄ suggest that non-hydrocarbon gas abundances are controlled by thermochemical sulfate reduction (TSR). In Khuff gases judged to be unaltered by TSR, methane δ¹³C generally falls between −40‰ and −35‰ VPDB and carbon dioxide δ¹³C between −3‰ and 0‰ VPDB. As H₂S/CH₄ increases, methane δ¹³C increases to as much as −3‰ and carbon dioxide δ¹³C decreases to as little as −28‰. These changes are interpreted to reflect the oxidation of methane to carbon dioxide.Khuff reservoir temperatures, which locally exceed 150 °C, appear high enough to drive the reduction of sulfate by methane. Anhydrite is abundant in the Khuff and fine grained nodules are commonly rimmed with secondary calcite cement. Some cores contain abundant pyrite, sphalerite and galena. Assuming that nitrogen is inert, loss of methane by TSR should increase N₂/CH₄ of the residual gas and leave δ¹⁵N unaltered. δ¹⁵N of Paleozoic gases in Saudi Arabia varies from −7‰ to 1‰ vs. air and supports the TSR hypothesis. N₂/CH₄ in gases from stacked Khuff reservoirs varies by a factor of 19 yet the variation in δ¹⁵N (0.3–0.5‰) is trivial.Because the relative abundance of hydrogen sulfide is not a fully reliable extent of reaction parameter, we have attempted to assess the extent of TSR using plots of methane δ¹³C versus log(N₂/CH₄). Observed variations in these parameters can be fitted using simple Rayleigh models with kinetic carbon isotope fractionation factors between 0.98 and 0.99. We calculate that TSR may have destroyed more than 90% of the original methane charge in the most extreme instance. The possibility that methane may be completely destroyed by TSR has important implications for deep gas exploration and the origin of gases rich in nitrogen as well as hydrogen sulfide.     

沉积盆地热化学硫酸盐还原作用评述

川东天然气藏H2S 气体泄露而导致重大伤亡事故后,热化学硫酸盐还原作用（TSR）成为了国内研究的热点。在油气储层条件下,尽管甲烷是最稳定的烃类,但TSR被诱发后,因为甲烷浓度远高于其它烃类,水溶甲烷能与硫酸根离子反应产生H2S 气体。同时,发现在参与TSR反应的有机质、起始温度、硫同位素分馏效应等方面,实验模拟结果均与地质实例观察结果有较大的差异,可能与TSR反应的催化剂等方面认识不足有关。并认为,TSR成因的H2S或元素硫可以在晚成岩期合并入有机质中,形成新的有机含硫化合物。但在自然界中,这类化合物很少被鉴别出来。     

The role of metal sulfates in thermochemical sulfate reduction (TSR) of hydrocarbons: Insight from the yields and stable carbon isotopes of gas products

The mechanism of thermochemical sulfate reduction (TSR) was investigated by separately heating n-C₂₄ with three different sulfates (CaSO₄, Na₂SO₄, MgSO₄) in sealed gold tubes at 420 °C and measuring the stable carbon isotope values of hydrocarbon (C₁-C₅) and non-hydrocarbon (CO₂) products. Extensive TSR was observed with the MgSO₄ reactant as reflected by increasing concentrations of H₂S, ¹³C depleted CO₂ and relatively low concentrations of H₂ (compared to the control). H₂S yields were already very high at the first monitoring time (12 h) when the temperature had just reached 420 °C, suggesting that TSR had commenced well prior to this temperature. Only trace amounts of n-C₂₄ and secondary C₃-C₅ alkanes were detected at 12 h, reflecting the efficient TSR utilization of the reactant and lower molecular weight alkane products. Ethane levels were still relatively high at 12 h, but declined thereafter as it was subject to TSR in the absence of higher molecular weight alkanes which had already been utilized. Methane yields were consistently high throughout the 48 h MgSO₄ treatment. The temporal decrease in the concentrations of alkanes available for TSR may also contribute to the sharp enhancement of CO₂ after 36 h. Absence or dampening of the molecular and isotopic trends of MgSO₄ TSR was observed with Na₂SO₄ and CaSO₄ respectively, directly reflecting the levels of TSR reached using these sulfate treatments.For all treatments, the δ¹³C values of C_1-5n-alkanes showed an increase with both molecular weight and treatment time. MgSO₄ TSR led to a 5-10‰ increase in the δ¹³C values of the C₁-C₅ hydrocarbons and a 20‰ decrease in the δ¹³C value of CO₂. The significant ¹³C depletion of the CO₂ may be due to co-production of ¹³C enriched MgCO₃, although this remains unproven as the δ¹³C of MgCO₃ was not measured. The difference in the δ¹³C values of ethane and propane (Δδ¹³C_EP) increased in magnitude with the degree of TSR, and this trend could be used to help evaluate the occurrence and extent of TSR in subsurface gas reservoirs.     

Seawater sulfate reduction and sulfur isotope fractionation in basaltic systems: Interaction of seawater with fayalite and magnetite at 200–350°C

Sulfate reduction during seawater reaction with fayalite and with magnetite was rapid at 350°C, producing equilibrium assemblages of talc-pyrite-hematite-magnetite at low water/rock ratios and talc-pyrite-hematite-anhydrite at higher water/rock ratios. At 250°C, seawater reacting with fayalite produced detectable amounts of dissolved H₂S, but extent of reaction of solid phases was minor after 150 days. At 200°C, dissolved H₂S was not detected, even after 219 days, but mass balance calculations suggest a small amount of pyrite may have formed. Reaction stoichiometry indicates that sulfate reduction requires large amounts of H⁺, which, in subseafloor hydrothermal systems is provided by Mg metasomatism. Seawater contains sufficient Mg to supply all the H⁺ necessary for quantitative reduction of seawater sulfate.Systematics of sulfur isotopes in the 250 and 350°C experiments indicate that isotopic equilibrium is reached, and can be modeled as a Rayleigh distillation process. Isotopic composition of hydrothermally produced H₂S in natural systems is strongly dependent upon the seawater/basalt ratio in the geothermal system, which controls the relative sulfide contributions from the two important sulfur sources, seawater sulfate and sulfide phases in basalt. Anhydrite precipitation during geothermal heating severely limits sulfate ingress into high temperature interaction zones. Quantitative sulfate reduction can thus be accomplished without producing strongly oxidized rocks and resultant sulfide sulfur isotope values represent a mixture of seawater and basaltic sulfur.     

The separate production of H2S from the thermal reaction of hydrocarbons with magnesium sulfate and sulfur: Implications for thermal sulfate reduction

The yields and stable C and H isotopic composition of gaseous products from the reactions of pure n-C₂₄ with (1) MgSO₄; and (2) elemental S in sealed Au-tubes at a series of temperatures over the range 220–600 °C were monitored to better resolve the reaction mechanisms. Hydrogen sulfide formation from thermochemical sulfate reduction (TSR) of n-C₂₄ with MgSO₄ was initiated at 431 °C, coincident with the evolution of C₂–C₅ hydrocarbons. Whereas the yields of H₂S increased progressively with pyrolysis temperature, the hydrocarbon yields decreased sharply above 490 °C due to subsequent S consumption. Ethane and propane were initially very ¹³C depleted, but became progressively heavier with pyrolysis temperature and were more ¹³C enriched than the values of a control treatment conducted on just n-C₂₄ above 475 °C. TSR of MgSO₄ also led to progressively higher concentrations of CO₂ showing relatively low δ¹³C values, possibly due to input of isotopically light CO₂ derived from gaseous hydrocarbon oxidation (e.g., more depleted CH₄).     

Experimental reduction of aqueous sulphate by hydrogen under hydrothermal conditions: Implication for the nuclear waste storage

Sulphate reduction by hydrogen, likely to occur in deep geological nuclear waste storage sites, was studied experimentally in a two-phase system (water + gas) at 250-300 °C and under 4-16 bars H₂ partial pressure in hydrothermal-vessels. The calculated activation energy is 131 kJ/mol and the half-life of aqueous sulphate in the presence of hydrogen and elemental sulphur ranges from 210,000 to 2.7 × 10⁹ years at respective temperatures of 90 °C, the thermal peak in the site and 25 °C, the ambient temperature far from the site. The features and rate of the sulphate reduction by H₂ are close to those established for TSR in oil fields. The experiments also show that the rate of sulphate reduction is not significantly affected in the H₂ pressure range of 4-16 bars and in the pH range of 2-5, whereas a strong increase is measured at pH below 2. We suggest that the condition for the reaction to occur is the speciation of sulphate dominated by non symmetric species ( at low pH), and we propose a three steps reaction, one for each intermediate-valence sulphur species, the first one requiring H₂S as electron donor rather than H₂. We distinguish two possible reaction pathways for the first step, depending on pH: reduction of sulphate into sulphur dioxide below pH 2 or into thiosulphate or sulphite + elemental sulphur in the pH range 2-5.     

Characterization of solid bitumens originating from thermal chemical alteration and thermochemical sulfate reduction

Solid bitumen can arise from several reservoir processes acting on migrated petroleum. Insoluble solid organic residues can form by oxidative processes associated with thermochemical sulfate reduction (TSR) as well as by thermal chemical alteration (TCA) of petroleum. TCA may follow non-thermal processes, such as biodegradation and asphaltene precipitation, that produce viscous fluids enriched in polar compounds that are then altered into solid bitumens. It is difficult to distinguish solid bitumen formed by TCA from TSR since both processes occur under relatively high temperatures. The focus of the present work is to characterize solid bitumen samples associated with TSR- or TCA-processes using a combination of solid-state X-ray Photoelectron Spectroscopy (XPS), Sulfur X-ray Absorption Near Edge Structure Spectroscopy (S-XANES), and ¹³C NMR. Naturally occurring solid bitumens from three locations, Nisku Formation, Brazeau River area (TSR-related); La Barge Field, Madison Formation (TSR-related); and, the Alaskan North Slope, Brooks Range (TCA-related), are compared to solid bitumens generated in laboratory simulations of TSR and TCA.The chemical nature of solid bitumens with respect to organic nitrogen and sulfur can be understood in terms of (1) the nature of hydrocarbon precursor molecules, (2) the mode of sulfur incorporation, and (3) their concentration during thermal stress. TSR-solid bitumen is highly aromatic, sulfur-rich, and nitrogen-poor. These heteroatom distributions are attributed to the ability of TSR to incorporate copious amounts of inorganic sulfur (S/C atomic ratio >0.035) into aromatic structures and to initial low levels of nitrogen in the unaltered petroleum. In contrast, TCA-solid bitumen is derived from polar materials that are initially rich in sulfur and nitrogen. Aromaticity and nitrogen increase as thermal stress cleaves aliphatic moieties and condensation reactions take place. TCA-bitumens from the Brooks Range have <75% aromatic carbon. TCA-bitumens exposed to greater thermal stress can have a higher aromaticity, like that observed in TSR-bitumens. Organic sulfur in TCA-organic solids remains relatively constant with increasing maturation (S/C atomic ratio <0.035) due to offsetting preservation and H₂S elimination reactions. Although S-XANES and ¹³C NMR provide information needed to understand changes in structure and reactivity that occur in the formation of petroleum solids, in some cases XPS analysis is sufficient to determine whether a solid bitumen is formed by TCA or TSR.     

Oxygen isotope exchange rate between dissolved sulfate and water at hydrothermal temperatures

Oxygen isotope exchange rate between dissolved sulfate and water was experimentally determined at 100, 200 and 300°C. The isotope exchange rate is strongly dependent on temperature and pH of the solution. Combining the temperature and pH dependence of the reaction rate, the exchange reaction was estimated to be first-order with respect to sulfate. The logarithm of apparent rate constant of exchange reaction at a given temperature is a function of the pH calculated at the experimental temperatures. From the pH dependence of the apparent rate constant, it was deduced that the isotope exchange reaction between dissolved sulfate and water proceeds through collision between H₂SO⁰₄ and H₂O at low pH, and between HSO^?₄ and H₂O at intermediate pH. The isotope exchange rate obtained indicates that oxygen isotope geothermometry utilizing the studied isotope exchange is suitable for temperature estimation of geothermal reservoirs. The extrapolated half-life of this reaction to oceanic temperature is about 10⁹ years, implying that exchange between oceanic sulfate and water cannot control the oxygen isotope ratio of oceanic sulfates.     

Origin of the unusually high dibenzothiophene oils in Tazhong-4 Oilfield of Tarim Basin and its implication in deep petroleum exploration

Unusually high dibenzothiophene (DBT) concentrations are present in the oils from the Tazhong-4 Oilfield in the Tazhong Uplift, Tarim Basin. Positive-ion electrospray ionization Fourier transform ion cyclotron resonance mass spectrometry (FT-ICR MS) was used in combination with conventional geochemical approaches to unravel the enrichment mechanisms. Significant amounts of S₁ species with relatively low DBE values (0–8), i.e., sulfur ethers, mercaptans, thiophenes and benzothiophenes, were detected in three Lower Ordovician oils with high thermal maturity, which were suggested to be the products of thermochemical sulfate reduction (TSR) in the reservoir. The occurrence of TSR was also supported by the coexistence of thiadiamondoids and abundant H₂S in the gases associated with the oils. Obviously low concentrations of the DBE = 9 S₁ species (mainly equivalent to C₀–C₃₅ DBTs) compared to its homologues were observed for the three oils which were probably altered by TSR, indicating that no positive relationship existed between TSR and DBTs in this study. The sulfur compounds in the Tazhong-4 oils are quite similar to those in the majority of Lower Ordovician oils characterized by high concentrations of DBTs and dominant DBE = 9 S₁ species with only small amounts of sulfur compounds with low thermal stability (DBE = 0–8), suggesting only a small proportion of sulfur compounds were derived from TSR. It is thermal maturity rather than TSR that has caused the unusually high DBT concentrations in most of the Lower Ordovician oils. We suggest that the unusually high DBT oils in the Tazhong-4 Oilfield are caused by oil mixing from the later charged Lower Ordovician (or perhaps even deeper), with high DBT abundances from the earlier less mature oils, which was supported by our oil mixing experiments and previous relevant investigations as well as abundant authigenic pyrite of hydrothermal origin. We believe that TSR should have occurred in the Tazhong Uplift based on our FT-ICR MS results. However, normal sulfur compounds were detected in most oils and no increase of δ¹³C₂H₆–δ¹³C₄H₁₀ was observed for the gas hydrocarbons, suggesting only a slight alteration of the oils by TSR currently and/or recently. We suspect that the abnormal sulfur compounds in the Lower Ordovician oils might also be a result of deep oil mixing, which might imply a deeper petroliferous horizon, i.e., Cambrian, with a high petroleum potential. This study is important to further deep petroleum exploration in the area.     

Theoretical study on the reactivity of sulfate species with hydrocarbons

The abiotic, thermochemically controlled reduction of sulfate to hydrogen sulfide coupled with the oxidation of hydrocarbons, is termed thermochemical sulfate reduction (TSR), and is an important alteration process that affects petroleum accumulations in nature. Although TSR is commonly observed in high-temperature carbonate reservoirs, it has proven difficult to simulate in the laboratory under conditions resembling nature. The present study was designed to evaluate the relative reactivities of various sulfate species in order to provide greater insight into the mechanism of TSR and potentially to fill the gap between laboratory experimental data and geological observations. Accordingly, quantum mechanics density functional theory (DFT) was used to determine the activation energy required to reach a potential transition state for various aqueous systems involving simple hydrocarbons and different sulfate species. The entire reaction process that results in the reduction of sulfate to sulfide is far too complex to be modeled entirely; therefore, we examined what is believed to be the rate limiting step, namely, the reduction of sulfate S(VI) to sulfite S(IV). The results of the study show that water-solvated sulfate anions are very stable due to their symmetrical molecular structure and spherical electronic distributions. Consequently, in the absence of catalysis, the reactivity of is expected to be extremely low. However, both the protonation of sulfate to form bisulfate anions () and the formation of metal-sulfate contact ion-pairs could effectively destabilize the sulfate molecular structure, thereby making it more reactive.Previous reports of experimental simulations of TSR generally have involved the use of acidic solutions that contain elevated concentrations of relative to . However, in formation waters typically encountered in petroleum reservoirs, the concentration of is likely to be significantly lower than the levels used in the laboratory, with most of the dissolved sulfate occurring as , aqueous calcium sulfate ([CaSO₄]_(aq)), and aqueous magnesium sulfate ([MgSO₄]_(aq)). Our calculations indicate that TSR reactions that occur in natural environments are most likely to involve bisulfate ions () and/or magnesium sulfate contact ion-pairs ([MgSO₄]_CIP) rather than ‘free’ sulfate ions () or solvated sulfate ion-pairs, and that water chemistry likely plays a significant role in controlling the rate of TSR.     

四川盆地普光大型气田H2S及优质储层形成机理探讨——读马永生教授的“四川盆地普光大型气田的发现与勘探启示”有感

四川盆地普光大型气田的发现刷新了中国海相碳酸盐岩油气田的多项记录：储量规模最大、储层埋藏最深、资源丰度最高，同时也是中国原油裂解气藏规模最大、天然气最于、硫化氢储量最多的气藏；另外它还是中国目前发现的碳酸盐岩储层次生孔隙最发育的气藏。深入研究后发现，普光超大型气藏的形成具有特殊的地质地球化学条件，即充沛的烃源、储层附近发育一定的膏质岩类、储层经历过较大的埋深〈较高的温度），这些条件是硫酸盐热化学还原作用（thermochemical sulfate reduction，简称TSR，）发生所必须具备的；而正是由于TSR的发生，一方面形成了富含H2S、CO2等酸性气体的流体；同时TSR过程及其形成的硫化氢等酸性流体具有腐蚀性，对深部碳酸盐岩储层进行强烈的溶蚀改造作用，促进了次生大孔洞的发育和优质储层的形成，因此TSR的发生是普光大型气田形成的关键因素之一。