Geochemical reconnaissance survey and environmental assessment for stream sediments of Wadi Um Gier,Southeastern Desert,Egypt

The purposes of this study were to assess the influence of old mining activities on the geochemistry and quality of sediments and to identify the sites of economic elements. Thirty sites of stream sediment were sampled in the study area covered by granitic, metarhyodacitic and meta-andesitic rocks and related tuffs-hosted abandoned Au mine. The suite of chemical elements, Ag, Bi, Cd, Cu, Fe, Ga, Hg, Mn, Nb, Pb, Rb, Sb, Se, Sn, Te, Th, U, Y, Zn and Zr, pH value and total organic carbon were determined, and univariate, bivariate and multivariate statistical methods were applied. The results show that the enrichment factor (EF) is very high in the case of Te and significant also with respect to Ag, Bi, Cu, Sb, Se, Sn and Zn. Likewise, geoaccumulation indices (Igeos) varied from very highly polluted with Sn and Te, strongly to very strongly polluted with Bi and Se, and moderately polluted with Sb. The polluted sites of Ag, Bi, Sb, Se, Sn and Te were outlined using Igeos maps, and economic sites of Ag and Sn were identified by geochemical maps leading to their sources, which are likely to be mining activities and lithogenic processes. The pollutant elements may cause toxicity in stream sediments, or surface or underground water, as well as plants and animals in the area. This investigation provides an environmental baseline for future monitoring of possible human/anthropogenic, industrial and agricultural impacts on the study area and considers an attempt at re-mining Ag and Sn.     

Spatial variability of soils and stream sediments and the remediation effects in a Portuguese uranium mine area

The old Senhora das Fontes uranium mine, located in central Portugal, was closed down in 1971. The treatment of ores from this mine and other mines by heap-leach ended in 1982. Seven dumps partially covered by vegetation were left in the area. Soil and stream sediment samples were collected in December 2009. The remediation was carried out from May 2010 to January 2011. Stream sediment samples were collected again in October 2013. Before the remediation, soils from inside the mine influence area have higher Al, As, Co, Cr, Cu, Fe, Ni, Sr, Th, U and Zn concentrations than soils from outside this area, due to radionuclides, metals and metalloid released from the mine dumps. The principal component analysis (PCA) shows a distinction between soils from inside and outside the mine influence area. The U(VI), As(V) and metals from soils can be adsorbed to Fe-oxyhydroxides and the humic acid can increase the U uptake. Soils must not be used for public or private green and residential areas, because they are contaminated in U, As, Co, Cd and Ni. Before the remediation, downstream sediments have higher Al, As, Cu, Mn, Ni, Pb, U and Zn than upstream sediments, due to erosion and percolation of water through the mine dumps. The PCA shows a distinction between downstream and upstream sediments. The U(VI), Th and As(V) can be adsorbed to Fe-oxyhydroxides. The stream sediments are contaminated in As, Mn, Th and U. Downstream sediments are the most contaminated in U and As. After the remediation, upstream and downstream sediments have generally higher Al, Fe, As, Cr, Ni, Th, U and Zn concentrations than before the remediation, attributed to the relocation of dumps. Radionuclides, metals and metalloids were transported by surface water. Consequently downstream sediments have higher Al, As, Cu, Mn, Ni, Th, U and Zn concentrations than upstream sediments. The U(VI), Th and As(V) can be adsorbed to Fe-oxyhydroxides. Stream sediments became more contaminated in U, Th and As than before the remediation, but more intensively downstream.     

Heavy metal distribution and assessment in stream sediments of River Orle,Southwestern Nigeria

Ten heavy metals, namely, Ag, As, Cd, Co, Cr, Cu, Hg, Ni, Pb and Zn were partially extracted using aqua regia digestion method and analysed by ICP-AES from 56 stream sediment samples collected from River Orle, Igarra area, southwestern Nigeria. The analytical results were used to produce geochemical distribution maps for the elements and were subjected to univariate statistical analysis in order to evaluate the distribution and abundance of the heavy metals in the study area. The degree of pollution of these stream sediments by these heavy metals was evaluated by calculating such parameters as enrichment factors (EF), as well as pollution load and geo-accumulation indices (PLI and Igeo). Co, Cr, Cu, Ni, Pb and Zn are widely distributed in the drainage system while the distribution of Ag, Cd, As and Hg is restricted to only parts of the drainage system with Ag and Cd being localized to one sample site each near Epkeshi in the southern part of the study area. Cr and Pb display anomalously high concentrations, each from a site, also in the same locality where Ag and Cd were detected, indicating the likelihood that the four elements, Cr, Pb, Ag and Cd, are genetically related. Calculation of the enrichment factor (EF), pollution load index (PLI) and geo-accumulation index (Igeo) yielded results that indicate that all the 56 stream sediment sites, except one located about 4 km southeast of Epkeshi in the southern part of the Orle drainage system, are practically unpolluted by heavy metals. The relatively high metal concentration of this anomalous site having Pb EF of 62.5, PLI of 1.14 and Pb Igeo of 2.44 signifies Pb pollution. Both natural and anthropogenic sources of the Pb contamination around Epkeshi locality are possible. In conclusion, the levels of concentrations of heavy metals in the study area, in general, do not constitute any serious environmental risk except for Pb which needs to be monitored at only one site in the study area. Therefore the concentration ranges for the different heavy metals in the study area can serve as baseline environmental data against which the degree of pollution of these heavy metals can be evaluated in future.     

Selective chemical extraction of heavy metals in tailings and soils contaminated by mining activity: Environmental implications

Total concentrations of chemical elements in soils may not be enough to understand the mobility and bioavailability of the elements. It is important to characterise the degree of association of chemical elements in different physical and chemical phases of soil. Another geochemical characterisation methodology is to apply sequential selective chemical extraction techniques. A seven-step sequential extraction procedure was used to investigate the mobility and retention behaviour of Al, Fe, Mn, Cu, Zn, Pb, Cr, Co, Ni, Mo, Cd, Bi, Sn, W, Ag, As and U in specific physical–chemical and mineral phases in mine tailings and soils in the surroundings of the abandoned Ervedosa mine. The soil geochemical data show anomalies associated with mineralised veins or influenced by mining. Beyond the tailings, the highest recorded concentrations for most elements are in soils situated in mineralised areas or under the influence of tailings. The application of principal components analysis allowed recognition of (a) element associations according to their geochemical behaviour and (b) distinction between samples representing local geochemical background and samples representing contamination. Some metal cations (Mn, Cd, Cu, Zn, Co, Cr, Ni) showed important enrichment in the most mobilisable and bioavailable (i.e., water-soluble and exchangeable) fractions due likely to the acidic conditions in the area. In contrast, oxy-anions such as Mo and As showed lower mobility because of adsorption to Fe oxy-hydroxides. The residual fraction comprised largest proportions of Sn and Al and to a lesser extent Zn, Pb, Ni, Cr, Bi, W, and Ag, which are also present at low concentrations in the bioavailable fractions. The elements in secondary mineral phases (mainly Fe, Mn, Cu, Zn, Cd, Pb, W, Bi, Mo, Cr, Ni, Co, As and U) as well as in organic matter and sulphides are temporarily withheld, suggesting that they may be released to the environment by changes in physico-chemical conditions.     

区域化探成果在环境保护中的应用

进入土壤和天然水体中的有害元素,对环境质量造成影响,其影响程度在区域化探资料上有反映,可采用水系沉积物背景值、污染起始值、污染指数等参数来评价环境质量,圈出污染区和划分污染等级。据1/200 000株洲幅区域化探资料,计算Cd、W、Ag、Bi、Hg、Sn、Pb、Mo、Zn、F、Cu、U、As、Ba、Sb、Be、P、Cr等18个元素各项污染参数,圈出50多处污染区,中等污染程度达21处,以Cd、W、Ag、Bi、Hg等污染严重、污染面广、危害较大,並对潘家冲、贺家桥两个污染区的环境质量作了具体评价,指出工厂、矿山排放的“三废”为污染源,应有效地进行治理。     

Spatio-temporal trends of heavy metals and source apportionment in Tolo Harbour,Hong Kong

This study provided a picture of the spatial and temporal distributions of Cr, Co, Ni Cu, Zn, As, Cd and Pb in bottom sediments of Tolo Harbour. The concentrations of the eight heavy metals differed significantly between sites due to the poor tidal flushing in Tolo Harbour. The levels of Cu, Zn, Cd and Pb were generally enriched in sediments from inner Tolo Harbour, while sediments from outer Tolo Harbour (Tolo Channel) had higher levels of Cr, Co and Ni. The redox sensitive element arsenic showed no distinct spatial pattern in Tolo Harbour. The decreasing levels of Cu, Zn, Pb and Cd in sediments with increasing distance from land demonstrated a typical diffusion pattern from land to the direction of sea. Two hot spots of Cu, Zn, Pb and Cd in sediments were located near Tai Po and Sha Tin new town, indicating that Cu, Zn, Pb and Zn were from land-derived sources. The sites with relatively high levels of Cr, Co and Ni in sediments were located in areas close to waste spoil in sea floor. The natural and anthropogenic inputs from Sha Tin and Tai Po to Tolo Harbour were mostly responsible for Cu, Zn, Cd and Pb enrichment in sediments from inner Tolo Harbour. The waste spoil in sea floor was believed to contribute to the Cr, Co and Ni in outer Tolo Harbour. The results of correlation coefficient between the eight heavy metals showed that Cu, Zn, Cd and Pb were strongly positively correlated, and Cr, Co and Ni were also significantly correlated with each other. The best explanation of strong correlation was their similar source. As, however, is not well correlated with the other seven heavy metals. The average concentrations of Cu and Zn displayed general increasing trends from 1978 to 2006 in Tolo Harbour, while the mean levels of Cr and Pb displayed a substantial decrease from 1978 to 1987, then a slight increase after 1987. No distinct temporal trends of the concentrations of Ni and As were observed from 1978 due to the inconsecutive data. On the other hand, the increasing trends of Cr, Cu, Zn, Cd and Pb were observed since 1996.     

Distribution and immobilization of heavy metals in Pliocene aquifer sediments in Wadi El Natrun depression, Western Desert

The Pliocene aquifer receives inflow of Miocene and Pleistocene aquifer waters in Wadi El Natrun depression. The aquifer also receives inflow from the agricultural activity and septic tanks. Nine sediment samples were collected from the Pliocene aquifer in Wadi E1 Natrun. Heavy metal (Cu, Sr, Zn, Mn, Fe, Al, Ba, Cr, Ni, V, Cd, Co, Mo, and Pb) concentrations of Pliocene aquifer sediments were investigated in bulk, sand, and mud fractions. The determination of extractable trace metals (Cu, Zn, Fe, Mn, and Pb) in Pliocene aquifer sediments using sequential extraction procedure (four steps) has been performed in order to study environmental pathways (e.g., mobility of metals, bounding states). These employ a series of successively stronger chemical leaching reagents which nominally target the different compositional fractions. By analyzing the liquid leachates and the residual solid components, it is possible to determine not only the type and concentration of metals retained in each phase but also their potential ecological significance. Cu, Sr, Zn, Mn, Fe, and Al concentrations are higher in finer sediments than in coarser sediments, while Ba, Cr, Ni, V, Cd, Co, Mo, and Pb are enriched in the coarser fraction. The differences in relative concentrations are attributed to intense anthropogenic inputs from different sources. Heavy metal concentrations are higher than global average concentrations in sandstone, USEPA guidelines, and other local and international aquifer sediments. The order of trace elements in the bulk Pliocene aquifer sediments, from high to low concentrations, is Fe?>?Al?>?Mn?>?Cr?>?Zn?>?Cu?>?Ni?>?V?>?Sr?>?Ba?>?Pb?>?Mo?>?Cd?>?Co. The Pliocene aquifer sediments are highly contaminated for most toxic metals, except Pb and Co which have moderate contamination. The active soluble (F0) and exchangeable (F1) phases are represented by high concentrations of Cu, Zn, Fe, and Mn and relatively higher concentrations of Pb and Cd. This may be due to the increase of silt and clay fractions (mud) in sediments, which act as an adsorbent, retaining metals through ion exchange and other processes. The order of mobility of heavy metals in this phase is found to be Pb?>?Cd?>?Zn?>?Cu?>?Fe?>?Mn. The values of the active phase of most heavy metals are relatively high, indicating that Pliocene sediments are potentially a major sink for heavy metals characterized by high mobility and bioavailability. Fe–Mn oxyhydroxide phase is the most important fraction among labile fractions and represents 22% for Cd, 20% for Fe, 11% for Zn, 8% for Cu, 5% for Pb, and 3% for Mn. The organic matter-bound fraction contains 80% of Mn, 72% of Cu, 68% of Zn, 60% of Fe, 35% of Pb, and 30% of Cd (as mean). Summarizing the sequential extraction, a very good immobilization of the heavy metals by the organic matter-bound fraction is followed by the carbonate-exchangeable-bound fraction. The mobility of the Cd metal in the active and Fe–Mn oxyhydroxide phases is the highest, while the Mn metal had the lowest mobility.     

Heavy metal history from cores in Wellington Harbour,New Zealand

Analysis of ten heavy metals (Ag, Cd, Cr, Cu, Fe, Mn, Ni, Pb, Sb, Zn) in six sediment cores from Wellington Harbour show both anthropogenic enrichments and diagenetic modifications. Absolute concentrations determined by two methods, x-ray fluorescence and acid leaching for bioavailability, are not comparable. However, vertical trends in concentrations of the cored sediment are comparable. To assess levels of anthropogenic pollution, enrichment factors (enriched concentrations in upper core divided by background levels in lower core) are preferred over index of accumulation (I _geo) values because preindustrial or background levels of heavy metals are well constrained. The ten metals are placed into three groups: (1) Cu, Pb, and Zn, which show the most anthropogenic enrichment; (2) As, Cd, Cr, Ni, and Sb, which are often associated with anthropogenic pollution but show only minor enrichment; and (3) Fe and Mn, which are diagenetically enriched. Assuming harbor waters are well mixed, anthropogenic enrichments of Cu, Pb, and Zn, are time correlative, but the degree of enrichment depends on the method of analysis and core location. Levels of As, Cd, Pb, and Zn show small variations in preindustrial sediments that are not related to changes in grain size and probably result from changes in the oxidation-reduction potential of the sediments and salinity of the pore waters.     

Environmental contamination of trace elements in the vicinity of Okpara coal mine, Enugu, Southeastern Nigeria

Water, sediment, and mine spoil samples were collected within the vicinity of the Okpara coal mine in Enugu, Southeastern Nigeria, and analyzed for trace elements using ICP-MS to assess the level of environmental contamination by these elements. The results obtained show that the mine spoils and sediments are relatively enriched in Fe, with mean values of 1,307.8(mg/kg) for mine spoils and 94.15% for sediments. As, Cd, Cr, Mn,Ni, Pb, and Zn in the sediments were found to be enriched relative to the mean values obtained from the study area, showing contamination by these elements. The mean values of Fe, Mn, Cu, and Cr in the mine spoils and mean values of Fe, Cu, Pb, Zn, Ni, Cr, and Mn in sediments, respectively, are above the background values obtained from coal and shale in the study area, indicating enrichment with these elements. The water and sediments are moderately acidic, with mean pH values of 4.22?±?1.06 and 4.66?±?1.35, respectively. With the exception of Fe, Mn, and Ni, all other elements are within the Nigerian water quality standard and WHO limits for drinking water and other domestic purposes. The strong to moderate positive correlation between Fe and Cu (r?=?0.72), Fe and Zn (r?=?0.88), and Fe and As (r?=?0.60) at p?<?0.05 as obtained for the sediments depict the scavenging effect of Fe on these mobile elements. As also shows a strong positive correlation with Mn (r?=?≥ 0.70, p?<?0.05), indicating that Mn plays a major role in scavenging elements that are not co-precipitated with Fe. In water, the strong positive correlation observed between Cr and Cd (r?=?1.00), Cu and Ni (r?=?0.94), Pb and Cu (r?=?0.87) and Zn and Cu (r?=?0.99); Ni and Pb (r?=?0.83) and Zn and Ni (r?=?0.97); and between Pb and Zn (0.84) at p?<?0.05 may indicate similar element–water reaction control on the system due to similarities in chemical properties as well as a common source. Elevated levels of heavy metals in sediments relative to surface water probably imply that sorption and co-precipitation on Al and Fe oxides are more effective in the mobilization and attenuation of heavy metals in the mine area than acid-induced dissolution. The level of concentration of trace elements for the mine spoils will serve as baseline data for future reference in the study area.     

Evidences for heavy metal contamination in surface sediments of seagrass ecosystem of Lakshadweep archipelago, India

Surface sediments of nine islands of Lakshadweep were evaluated for their heavy metal concentration (Cd, Co, Cr, Cu, Fe, Mn, Ni, Pb and Zn). Sediments of thirteen seagrass and seven non seagrass sites were collected randomly and analysed for heavy metal concentration using Inductively Coupled Plasma Optical Emission Spectrometer. Heavy metals like Cu, Ni and Zn were found in higher concentrations in the seagrass sediments, whereas other heavy metals such as Cd, Co, Cr, Fe, Mn and Pb were higher in non seagrass sediments. Different pollution indices were calculated to evaluate contamination level of all heavy metals in the sediments. Cadmium recorded higher contamination factor (1.733–21.067), enrichment factor (276.10–12,270) and Geo-accumulation Index (0.208–3.811) both in seagrass and nonseagrass sediments. Multivariate statistical analysis such as principal component analysis and cluster analysis coupled together with correlation co-efficient was used to identify the possible sources of heavy metal pollution in the region. Average concentrations of Cd in Lakshadweep islands were slightly higher than effective range, low but still below effective range medium. All other metals were still below these ranges indicating fairly uncontaminated sediment in the region.     

Heavy metal pollution in freshly deposited sediments of the Yamuna River (the Ganges River tributary): a case study from Delhi and Agra urban centres, India

 The Yamuna River sediments, collected from Delhi and Agra urban centres, were analysed for concentration and distribution of nine heavy metals by means of atomic adsorption spectrometry. Total metal contents varied in the following ranges (in mg/kg): Cr (157–817), Mn (515–1015), Fe (28,700–45,300), Co(11.7–28.4), Ni (40–538), Cu (40–1204), Zn (107–1974), Pb (22–856) and Cd (0.50–114.8). The degree of metal enrichment was compared with the average shale concentration and shows exceptionally high values for Cr, Ni, Cu, Zn, Pb and Cd in both urban centres. In the total heavy metal concentration, anthropogenic input contains 70% Cr, 74% Cu, 59% Zn, 46% Pb, 90% Cd in Delhi and 61% Cr, 23% Ni, 71% Cu, 72% Zn, 63% Pb, 94% Cd in Agra. A significant correlation was observed between increasing Cr, Ni, Zn, and Cu concentrations with increasing total sediment carbon and total sediment sulfur content. Based on the Müller's geoaccumulation index, the quality of the river sediments can be regarded as being moderately polluted to very highly polluted with Cr, Ni, Cu, Zn, Pb and Cd in the Delhi and Agra urban centres. The present sediment analysis, therefore, plays an important role in environmental measures for the Yamuna River and the planning of these city centres. Received: 21 June 1999 · Accepted: 1 October 1999     

Trace metal in beach sediments of Velanganni Coast,South India: application of autoclave leach method

The concentration of trace metals like Cd, Cr, Cu, Fe, Mn, Ni, Pb, and Zn were studied in beach and estuarine sediments of the Velanganni Coast, South East coast of India to understand metal pollution due to urbanization/industrialization. This area was affected by the urbanization activity like untreated effluent discharge, transportation and incineration of solid waste, etc. In this context, quality of the sediments was evaluated based on the enrichment factor, geo-accumulation index (Igeo), pollution load index, and sediment quality guidelines. Furthermore, correlation matrix and principal compound analyses have been performed with SPSS 7.5 statistical software. The result illustrated that the metal enrichment is in the following order: Cd > Cr > Ni > Zn > Pb > Mn > Cu. The level of Igeo suggests that Cd has moderately polluted the sediment class. Similarly, principal component analysis showed that Cd and Pb accounted for the anthropogenic pollution, but Pb inferred as its tracers level. The results strongly indicate anthropogenic sources for moderate input of Cd contamination in to Velanganni coastal sediments.     

Status of anthropogenically induced metal pollution in the Kanpur-Unnao industrial region of the Ganga Plain, India

 The Ganga Plain is one of the most densely populated regions and one of the largest groundwater repositories of the Earth. For several decades, the drainage basin of the Ganga Plain has been used for the disposal of domestic and industrial wastes which has adversely affected the quality of water, sediments and agricultural soils of the plain. The concentrations of Al, Cd, Co, Cr, Cu, Fe, Mn, Ni, Pb, Sn, Zn and organic carbon were determined in river sediments and soils of the Ganga Plain in the Kanpur-Unnao industrial region in 1994 and 1995 (pre-monsoon period of April–May). High contents (maximum values) of C-org (12.0 wt. %), Cr (3.40 wt. %), Sn (1.92 wt. %), Zn (4000 mg/kg), Pb (646 mg/kg), Cu (408 mg/kg), Ni (502 mg/kg) and Cd (9.8 mg/kg) in sediments (<20 μm fraction); and C-org (5.9 wt. %), Cr (2.16 wt. %), Sn (1.21 wt %), Zn (975 mg/kg) and Ni (482 mg/kg) in soils (<20 μm) in the pre-monsoon period of 1994 were found. From 1994 to 1995 the contents of Fe and Sn in sediments increase whereas those of C-org, Cd, Cu, Ni and Zn decrease. Considering the analytical errors, Al, Co, Cr, Mn and Pb do not show any change in their concentrations. In soils, the contents of Cd, Fe and Sn increase whereas those of Ni decrease from 1994 to 1995. Aluminium, Co, Cr, Cu, Mn, Pb and Zn do not show any change in their concentrations from 1994 to 1995. About 90% of the contents of Cd, Cr and Sn; 50–75% of C-org, Cu and Zn; and 25% of Co, Ni and Pb in sediments are derived from the anthropogenic input in relation to the natural background values, whereas in soils this is the case for about 90% of Cr and Sn; about 75% of Cd; and about 25% of C-org, Cu, Ni and Zn. The sediments of the study area show enrichment factors of 23.6 for Cr, 14.7 for Cd, 12.2 for Sn, 3.6 for C-org, 3.2 for Zn, 2.6 for Cu and 1.6 for Ni. The soils are enriched with factors of 10.7 for Cr, 9.0 for Sn, 3.6 for Cd, 1.8 for Ni and 1.5 for Cu and Zn, respectively. Received: 3 March 1998 · Accepted: 15 June 1998     

Concentrations and solubility of heavy metals in muck sediments from the St. Lucie Estuary,U.S.A.

To evaluate muck sediments as a potential soil amendment, total and Mehlich III-extractable concentrations of Cd, Cu, Cr, Ni, Pb, Zn, and Co in 59 muck sediment samples from the St. Lucie Estuary were analyzed. A seven-step chemical fractionation procedure was used to assess the potential mobility of heavy metals. Except for Cd, the average total concentrations of the metals are lower than the reported average concentrations of these elements in municipal composts in the U.S.A. The concentrations were also below critical levels for the safe use of wastes and byproducts in agriculture, as established by the United States Environmental Protection Agency. The Cd, Cu, Cr, Ni, Pb, Zn and Co in the sediments were predominantly associated with silicate minerals in the residual form. Most metals in the muck sediments occur predominantly in weakly mobile or nonbioavailable forms. Use of mucks in neutral pH upland soils should not pose any significant hazards or risk to the environment. However, Cd, Cu, Cr, Ni, Pb, Zn, and Co, especially Zn, Cu, and Pb, could be more readily released from the muck sediments under acidic soil conditions.     

雅鲁藏布江表层沉积物地球化学元素研究

雅鲁藏布江流域还没有大的工业污染源,仍然属于自然河流.对雅鲁藏布江16个表层沉积样品的全样、小于20μm 和小于63μm 粒级的32种元素含量进行了测定,并分析了与人类活动密切相关的元素 Cr、Mn、Fe、Co、Ni、Cu、Zn、As、Cd 和 Pb 的含量分布特征,以及这些元素含量与粒径之间的关系.结果表明,多数元素(Cs 除外)与西藏土壤元素背景值相差不大, B、Cr、Ni、As 和 Cs 含量高于中国陆壳元素丰度值,但这些元素主要来源于该流域富含这些元素的页岩、片岩和千枚岩等母岩.由于相似的地球化学行为,沉积物中 Cr、Mn、Fe、Co、Ni、Cu、Zn 之间显著正相关;除 Pb、As 外,一些元素(如 Zn、Ni)与沉积物的粒径显著负相关     

Distribution of trace elements in waters and sediments of the Seversky Donets transboundary watershed (Kharkiv region,Eastern Ukraine)

This paper reports on the aquatic chemistry of trace elements in terms of spatial and temporal distribution, but also pollution sources in the transboundary watershed of the Seversky Donets River (Ukraine/Russia). Bed sediments and filtered water were collected from the Udy and Lopan Rivers at sites from the river source in the Belgorod region (Russia) to rural and urban areas in the Kharkiv region (Ukraine) in May and August 2009. Priority trace elements (As, Cd, Cr, Cu, Hg, Ni, Pb and Zn), an urban tracer (Ag) and additional metals (Co, Mo, V) and Th were measured in stream water and sediments. The low levels and variability of Th-normalized concentrations indicated the absence of geochemical anomalies in the upstream part of the rivers and suggested that these data represent a regional baseline for trace elements in bed sediments. In contrast, water and sediments within the city of Kharkiv were contaminated by Ag, Pb, Cd, Cu, Cr and Zn, which are mainly attributed to municipal wastewater inputs and urban run-off. Results of the environmental quality assessment showed that element concentrations in the sediments can be considered as potentially toxic to aquatic organisms in sites downstream of the wastewater discharges.     

Geochemical variations of major and trace elements in recent sediments,off the Gulf of Mannar,the southeast coast of India

The Gulf of Mannar along the Tuticorin coast is a coral base of the southeast coast of India. To obtain a preliminary view of its environmental conditions, geochemical distribution of major elements (Si, Al, Fe, Ca, Mg, Na, K, P), trace elements (Mn, Cr, Cu, Ni, Co, Pb, Zn, Cd) and acid leachable elements (Fe, Mn, Cr, Cu, Ni, Co, Pb, Zn, Cd) were analyzed in surface sediment samples from two seasons. Geochemical fractionation confirmed the lithogenic origin of metals, which were mainly associated with the detrital phase. The sediments in the gulf are sandy with abundant calcareous debris, which controls the distribution of total and acid leachable elements. Enrichment factors relative to crust vary by a magnitude of two to three and the presence of trace metals indicates the input of Cr, Pb, Cd, Cu and Zn in both forms through industrial activities. Factor analysis supports the above observation with higher loadings on acid leachable elements and its association with CaCO₃. The increase in concentration of trace metals (Cr, Pb, Cd, Cu, Co, Ni, Zn) along the Gulf of Mannar indicates that the area has been contaminated by the input from riverine sources and the industries nearby. The present study indicates that other sources should be evaluated in the long-term monitoring program.     

Multivariate statistical techniques for evaluating and identifying the environmental significance of heavy metal contamination in sediments of the Yangtze River, China

The concentrations of heavy metals (Cr, Co, Ni, Cu, Zn, Pb, Cd, As, Hg, and Fe) in sediments of the Yangtze River, China, were investigated to evaluate levels of contamination and their potential sources. The lowest heavy metal concentrations were found in the source regions of the river basin. Relatively high concentrations of metals, except Cr, were found in the Sichuan Basin, and the highest concentrations were in the Xiangjiang and Shun’anhe rivers. All concentrations, except Ni, were higher than global averages. Principal component analysis and hierarchical cluster analysis showed that Zn, Pb, As, Hg, and Cd were derived mainly from the exploitation of various multi-metal minerals, industrial wastewater, and domestic sewage. Cu, Co, and Fe were derived mainly from natural weathering (erosion). Cr and Ni were derived mainly from agricultural activities, municipal and industrial wastewater. Sediment pollution was assessed using the geoaccumulation index (I _geo) and enrichment factor (EF). Among the ten heavy metals assessed, Cd and Pb had the highest I _geo values, followed by Cu, As, Zn, and Hg. The I _geo values of Fe, Cr, Co, and Ni were <0 in all sediments. EF provided similar information to I _geo: no enrichment was found for Cr, Co, and Ni. Cu, Zn, As, and Hg were relatively enriched at some sites while Cd and Pb showed significant enrichment.     

Multivariate canonical correlation techniques: An economic approach for evaluation of pollutants in soil and sediments of Bombay region, India

Multivariate canonical correlation analysis has been carried out taking physical variables (mean, standard deviation, skewness, kurtosis) as predictors and chemical variables (Cd, Co, Cr, Cu, Fe, Mn, Ni, Pb, and Zn) as responses from the soils and sediments of Thane Creek and Ulhas River areas in Bombay, India. Soil samples provide the first canonical correlation to the presence of more clay fractions, which controls the concentration of trace elements such as Co, Fe, and Ni. In sediment samples, the first canonical correlation explains the role of mean particle size in controlling the concentration of Pb and Ni. The second correlation shows the role of clay minerals in controlling the concentration of the trace elements such as Fe and Zn. The plot of transformed scores of first canonical correlation for soil illustrate the high correlation between sets of variables as all points are grouped closely within an ellipsoidal field. The plot of transformed scores of first canonical correlation illustrate that there is a clear distinction between the type of sediments collected from Thane creek and the Ulhas river region.     

A GIS-based approach for detecting pollution sources and bioavailability of metals in coastal and marine sediments of Chabahar Bay,SE Iran

Chabahar Bay in SE of Iran is a shallow semi-enclosed environment affected by anthropogenic activities. In this paper, 19 sediment samples were collected and concentration of selected metals (Cu, Pb, Zn, Cd, Ni, Cr, Co, V and Fe) was determined using ICP-MS analytical method. Sediment samples from five stations were also selected for sequential extraction analysis and concentration of metals in each fraction was determined using ICP-OES. In order to investigate the environmental quality of Chabahar Bay, geographic information system (GIS) along with geochemical data, environmental indices and statistical analyses were used. Calculated contamination degree (C_d) revealed that most contaminated stations (Ch3, S1 and S3) are located SE of Chabahar Bay and contamination decreases in a NW direction. The S9 station, west of the bay, is also contaminated. High organic matter (OM) content in the sediments is most likely the result of fuel and sewage discharge from fishing vessels along with discharge of fishing leftovers. Significant correlation coefficient among OM, Fe, Cu, Pb, Zn and Cd seemingly reflects the importance of the role that OM and Fe oxy-hydroxides play in the metals mobility. The results of hierarchical cluster analysis (HCA), computed correlation coefficient and sequential extraction analysis suggest that Cu, Pb, Zn and Cd probably come from antifouling and sea vessel paints, while Ni, Cr, Co, V and Fe are most likely contributed by ophiolitic formations located north of the bay and/or deep sea sediments. Average individual contamination factors (ICFs) indicated that the highest health hazard from the bay is posed by Cu, Pb and Zn.