The Palaeozoic evolution in the Alps: from Gondwana to Pangea

More than 50% of the Alps expose fragments of Palaeozoic basement which were assembled during the Alpine orogeny. Although the tectonic and metamorphic history of the basement units can be compared to that of the Variscan crust in the Alpine foreland, most of the basement pieces of the Alps do not represent the direct southern continuation of Variscan structural elements evident in the Massif Central, the Vosges–Black Forest or the Bohemian massif. The basement units of the Alps all originated at the Gondwana margin. They were derived from a Precambrian volcanic arc suture fringing the northern margin of Gondwana, from which they were rifted during the Cambrian–Ordovician and Silurian. A short-lived Ordovician orogenic event interrupted the general rifting tendency at the Gondwana active margin. After the Ordovician, the different blocks drifted from the Gondwana margin to their Pangea position, colliding either parallel to Armorica with Laurussia or with originally peri-Gondwanan blocks assembled presently in Armorica. From the Devonian onwards, many basement subunits underwent the complex evolution of apparently oblique collision and nappe stacking. Docking started in the External massifs, the Penninic and Lower and middle Austroalpine units in approximately Devonian/early Carboniferous times, followed by the Upper Austroalpine and the South Alpine domains, in the Visean and the Namurian times, respectively. Wrenching is probably the best mechanism to explain all syn and post-collisional phenomena since the Visean followed by post-orogenic collapse and extension. It explains the occurrence of strike-slip faults at different crustal levels, the formation of sedimentary troughs as well as the extrusion and intrusion of crustal and mantle-derived magmas, and allows for contemporaneous rapid uplift of lower crustal levels and their erosion. From the Stephanian onwards, all regions were deeply eroded by large river systems.     

Gondwana-derived microcontinents — the constituents of the Variscan and Alpine collisional orogens

The European Variscan and Alpine mountain chains are collisional orogens, and are built up of pre-Variscan “building blocks” which, in most cases, originated at the Gondwana margin. Such pre-Variscan elements were part of a pre-Ordovician archipelago-like continental ribbon in the former eastern prolongation of Avalonia, and their present-day distribution resulted from juxtaposition through Variscan and/or Alpine tectonic evolution. The well-known nomenclatures applied to these mountain chains are the mirror of Variscan resp. Alpine organization. It is the aim of this paper to present a terminology taking into account their pre-Variscan evolution at the Gondwana margin. They may contain relics of volcanic islands with pieces of Cadomian crust, relics of volcanic arc settings, and accretionary wedges, which were separated from Gondwana by initial stages of Rheic ocean opening. After a short-lived Ordovician orogenic event and amalgamation of these elements at the Gondwanan margin, the still continuing Gondwana-directed subduction triggered the formation of Ordovician Al-rich granitoids and the latest Ordovician opening of Palaeo-Tethys. An example from the Alps (External Massifs) illustrates the gradual reworking of Gondwana-derived, pre-Variscan elements during the Variscan and Alpine/Tertiary orogenic cycles.     

Organization of pre-Variscan basement areas at the north-Gondwanan margin

Pre-Variscan basement elements of Central Europe appear in polymetamorphic domains juxtaposed through Variscan and/or Alpine tectonic events. Consequently, nomenclatures and zonations applied to Variscan and Alpine structures, respectively, cannot be valid for pre-Variscan structures. Comparing pre-Variscan relics hidden in the Variscan basement areas of Central Europe, the Alps included, large parallels between the evolution of basement areas of future Avalonia and its former peri-Gondwanan eastern prolongations (e.g. Cadomia, Intra-Alpine Terrane) become evident. Their plate-tectonic evolution from the Late Proterozoic to the Late Ordovician is interpreted as a continuous Gondwana-directed evolution. Cadomian basement, late Cadomian granitoids, late Proterozoic detrital sediments and active margin settings characterize the pre-Cambrian evolution of most of the Gondwana-derived microcontinental pieces. Also the Rheic ocean, separating Avalonia from Gondwana, should have had, at its early stages, a lateral continuation in the former eastern prolongation of peri-Gondwanan microcontinents (e.g. Cadomia, Intra-Alpine Terrane). Subduction of oceanic ridge (Proto-Tethys) triggered the break-off of Avalonia, whereas in the eastern prolongation, the presence of the ridge may have triggered the amalgamation of volcanic arcs and continental ribbons with Gondwana (Ordovician orogenic event). Renewed Gondwana-directed subduction led to the opening of Palaeo-Tethys.     

The East Variscan Shear Zone: new insights into its role in the Late Carboniferous collision in southern Europe

A comparison of the petro-tectonic features recorded in the Variscan Massifs scattered throughout the Alps, the Corsica-Sardinia-Maures-Tanneron Massif, the Calabria-Peloritani Arc, and the Northern Apennines, has allowed us to propose that they belonged to the same geodynamic realm until Late Carboniferous time. In the interval 330–300 Ma, the development of a regional dextral strike–slip shear zone, the East Variscan Shear Zone (EVSZ), affected all the massifs, leading to their spatial separation. The EVSZ developed, together with numerous regional shear zones, under a transpressional tectonic regime deriving from the Late Carboniferous collision between Gondwana, peri-Gondwana microcontinents (Armorica and Avalonia), and Laurussia plates. The EVSZ evidently played a key role in the evolution of the subsequent Alpine and Apenninic cycles, acting as a pre-existing tectonic barrier. Our proposed geodynamic reconstruction does not reflect the acquisition of new data, but is based on the analysis and review of the recent geological literature.     

Variscan plate dynamics in the circum-carpathian area

Abstract

Magmatic and metamorphic events, imprinted in the crystalline rocks of the so-called core mountains inside the Alpine structure of the Inner Carpathians, allow the re-construction of the history of the Rheic Ocean opening, its development and its final closure. Intra-Carpathian core-mountains are the remnants of the continents that drifted away from Gondwana and docked, initially, with Baltica as part of Avalonia and later on as parts of the Gondwana-derived Armorica Terrane Group or as a separate micro-continent.

All magmatic suites, mafic and felsic, present in the Carpathians core mountains, show similarities to those found in the European Variscan Belt. All described- and dated metamorphic and magmatic events also have equivalents in the evolution of the Caledonian-Variscan Belts of Europe. The most pronounced feature of all Carpathian core mountains is the syn-collisional, multistage I/S granitoid magmatism (370-340 Ma) related to subduction, mafic-magma influx, extensional decompression and slab melting. That episode marked the Laurussia - Gondwana collision and closure of the Rheic Ocean, as in the whole of Central and Western Europe.

The Carpathian core-mountains, currently dispersed inside the Alpine mountain chain, can be considered the broken fragments of the eastern prolongation of the Variscan orogenic belts – possibly part of the Moldanubian Unit.     

Thermomechanical evolution of the high‐grade core in the nappe zone of Variscan Sardinia,Italy: the role of shear deformation and granite emplacement

In the nappe zone of the Sardinian Variscan chain, the deformation and metamorphic grade increase throughout the tectonic nappe stack from lower greenschist to upper amphibolite facies conditions in the deepest nappe, the Monte Grighini Unit. A synthesis of petrological, structural and radiometric data is presented that allows us to constrain the thermal and mechanical evolution of this unit. Carboniferous subduction under a low geothermal gradient (~490–570 °C GPa^?1) was followed by exhumation accompanied by heating and Late Carboniferous magma emplacement at a high apparent geothermal gradient (~1200–1450 °C GPa^?1). Exhumation coeval with nappe stacking was closely followed by activity on a ductile strike‐slip shear zone that accommodated magma intrusion and enabled the final exhumation of the Monte Grighini Unit to upper crustal levels. The reconstructed thermo‐mechanical evolution allows a more complete understanding of the Variscan orogenic wedge in central Sardinia. As a result we are able to confirm a diachronous evolution of metamorphic and tectonic events from the inner axial zone to the outer nappe zone, with the Late Variscan low‐P/high‐T metamorphism and crustal anatexis as a common feature across the Sardinian portion of the Variscan orogen.     

Crustal‐mantle lithosphere decoupling as a control on Variscan metamorphism in the Eastern Alps

Mica schists of the Variscan Austroalpine Ötztal basement (Eastern Alps) contain synkinematically grown garnet porphyroblasts showing three zones with complex inclusion trails. Staurolite, kyanite and sillimanite grew over the main schistosity that envelops the garnet porphyroblasts. The mineral‐forming reaction sequences modelled in the MnKFMASH and KFMASH systems show that garnet of zone 1 grew at approximately 1300 MPa, whereas zone 2 and zone 3 grew during substantial decompression and partial thermal relaxation. For the growth of staurolite, kyanite and sillimanite, this modelling shows that thermal relaxation continued after decompression under only slightly changing pressure conditions, until the peak temperature conditions of Variscan metamorphism were reached. The result of this modelling is a pressure‐temperature‐time (P–T–t) heating path that is consistent with a tectonic interpretation implying thickening of the lithosphere during continental collision and subsequent mantle ‐ crustal lithosphere decoupling plus extension. A direct implication of this model is that the heat budget of Variscan metamorphism was controlled by the convective replacement of the thickened lithospheric root with asthenospheric material.     

Structural inversion and its controls : examples from the Alpine foreland and the French Alps

Abstract

Positive structural inversion involves the uplift of rocks on the hanging-walls of faults, by dip slip or oblique slip movements. Controlling factors include the strike and dip of the earlier normal faults, the type of normal faults — whether they were listric or rotated blocks, the time lapsed since extension and the amount of contraction relative to extension. Steeply dipping faults are difficult to invert by dip slip movements; they form buttresses to displacement on both cover detachments and on deeper level but gently inclined basement faults. The decrease in displacement on the hanging-walls of such steep buttresses leads to the generation of layer parallel shortening, gentle to tight folds — depending on the amount of contractional displacement, back-folds and back-thrust systems, and short-cut thrust geometries — where the contractional fault slices across the footwall of the earlier normal fault to enclose a “floating horse”. However, early steeply dipping normal faults readily form oblique to strike slip inversion structures and often tramline the subsequent shortening into particular directions.

Examples are given from the strongly inverted structures of the western Alps and the weakly inverted structures of the Alpine foreland. Extensional faulting developed during the Triassic to Jurassic, during the initial opening of the central Atlantic, while the main phases of inversion date from the end Cretaceous when spreading began in the north Atlantic and there was a change of relative motion between Europe and Africa. During the mid-Tertiary well over 100 km of Alpine shortening took place; Alpine thrusts, often detached along, or close to, the basement-cover interface, stacking the late Jurassic to Cretaceous sediments of the post-extensional subsidence phase. These high level detachments were joined and breached by lower level faults in the basement which, in the external zones of the western Alps, generally reactivated and rotated the earlier east dipping half-graben bounding faults. The external massifs are essentially uplifted half-graben blocks. There was more reactivation and stacking of basement sheets in the eastern part of this external zone, where the faults had been rotated into more gentle dips above a shallower extensional detachment than on the steeper faults to the west.

There is no direct relationship between the weaker inversion of the Alpine foreland and the major orogenic contraction of the western Alps; the inversion structures of southern Britain and the Channel were separated from the Alps by a zone of rifting from late Eocene to Miocene which affected the Rhone, Bresse and Rhine regions. Though they relate to the same plate movements which formed the Alps, the weaker inversion structures must have been generated by within plate stresses, or from those emanating from the Atlantic rather than the Tethyan margin.     

Electron-microprobe dating of monazites from Western Carpathian basement granitoids: plutonic evidence for an important Permian rifting event subsequent to Variscan crustal anatexis

Accessory monazites from 35 granitoid samples from the Western Carpathian basement have been analysed with the electron microprobe in an attempt to broadly constrain their formation ages, on the basis of their Th, U and Pb contents. The sample set includes representative granite types from the Tatric, Veporic and Gemeric tectonic units. In most cases Lower Carboniferous (Variscan) ages have been obtained. However, a much younger mid-Permian age has been recorded for the specialised S-type granites of the Gemeric Unit, and several small A- and S-type granite bodies in the Veporic Unit and the southern Tatric Unit. This distinct Permian plutonic activity in the southern part of the Western Carpathians is an important, although previously little considered geological feature. It appears to be not related to the Variscan orogeny and is interpreted here to reflect the onset of the Alpine orogenic cycle, with magma generation in response to continental rifting. The voluminous Carboniferous granitoid bodies in the Tatric and Veporic units comprise S- and I-type variants which document crustal anatexis accompanying the collapse of a compressional Variscan orogen sector. The Variscan magmas were most likely produced through the remelting of a subducted Precambrian volcanic arc-type crust which included both igneous and sedimentary reworked volcanic-arc material. Although the 2C errors of the applied dating method are quite large and typically ᆞ-20 Ma for single samples, it would appear from the data that the Variscan S-type granitoids (333-367 Ma) are systematically older than the Variscan I-type granitoids (308-345 Ma). This feature is interpreted in terms of a prograde temperature evolution in the deeper parts of the post-collisional Variscan crust. In accordance with recently published zircon ages, this study shows that the Western Carpathian basement must be viewed as a distinct "eastern" tectonomagmatic province in the Variscan collision zone, where the post-collisional crustal melting processes occurred ~20 Ma earlier than in the central sector (South Bohemian Batholith, Hohe Tauern Batholith).     

Variscan to eo-Alpine events recorded in European lower-crust zircons sampled from the French Massif Central and Corsica, France

Ion-microprobe U–Pb zircon dating of lower-crust metasedimentary granulite are reported on samples from two localities in Europe in order to determine (a) how this environment recorded the Variscan and eo-Alpine events, and (b) whether the transition between the two orogenic cycles was continuous or separated by a gap. The samples come from enclaves hosted by Miocene volcanoes at Bournac in the French Massif Central, and from the granulitic metasedimentary basement of the Alpine Santa Lucia nappe in Corsica, on the South European paleomargin of the Ligurian branch of the Tethys Sea. The zircon ages from Bournac range between 630 and 430 Ma and between 380 and 150 Ma with a major frequency peak at 285 Ma; the zircons older than 430 Ma are interpreted as detrital, whereas those younger than 380 Ma are considered to have formed by metamorphic processes after burial in the lower crust. Zircon ages from Santa Lucia range from to 356 to 157 Ma, with exception of one inherited Archean grain, and are interpreted like the younger Bournac zircons as having been formed by metamorphic processes.

In a granulite metamorphic environment, as opposed to an anatectic environment, new zircon growth can occur in the solid state. Once Zr has been incorporated into zircon, however, it is difficult to remobilize without dissolution; thus Zr available for new zircon growth must result from the breakdown of Zr-bearing minerals during prograde and/or retrograde events. In this light, the U–Pb zircon-age probability curves are interpreted as markers for major tectonometamorphic events, as suggested by the close correspondence between peaks in the curve and geological events recorded in the upper-crust, such as magma emplacement and basin subsidence.

Evidence of a tectonometamorphic gap between the Variscan and Alpine orogeneses is provided by the Santa Lucia zircon-age probability curve, which reveals a probable interlude during the Variscan–Alpine transition between 240 and 210 Ma. Here, the peak at 240 Ma is interpreted as the very beginning of crustal extension and the low at 210 Ma as a period of quiescence prior to the formation of an active margin and oceanization.     

Variscan relicts in Alpine high-P pelitic rocks from Samos (Greece): evidence from multi-stage garnet and its included minerals

Porphyroblastic garnet schists from northern Samos contain in their matrix the assemblage Ca‐rich garnet + phengite + paragonite ± chloritoid equilibrated at ～530 °C and ～19 kbar during early Tertiary metamorphism. These high‐pressure/low‐temperature (HP‐LT) metapelitic rocks also exhibit mineralogical and microstructural evidence of an older, higher temperature metamorphism. Large, centimetre‐sized Fe‐rich garnet showing growth zoning developed discontinuous, <0.5 mm thick, Ca‐rich and Mn‐poor overgrowths, compositionally matching small (<1 mm) high‐P matrix garnet. Because the discontinuous garnet rims are in textural and chemical equilibrium with Alpine high‐P minerals, the central parts of the garnet porphyroblasts were found to have formed prior to the Tertiary metamorphism. This is supported by electron microprobe U‐Th‐Pb dating of monazite inclusions yielding partly reset Variscan ages between 360 and 160 Ma. Monazite‐xenotime and garnet‐muscovite thermometry applied to inclusions in the pre‐Alpine garnet yielded temperatures of 600–625 °C (at 3–8 kbar). Prismatic Al‐rich pseudomorphs, possibly after kyanite/sillimanite, and inclusions in garnet composed of white K‐Na mica + quartz ± albite ± K feldspar, interpreted as possible replacements of an intermediate K‐Na feldspar, further support Variscan amphibolite facies conditions. The Samos metapelites thus experienced higher temperatures during the Variscan than during Alpine metamorphism. Diffusional relaxation was very limited between pre‐Alpine garnet and Alpine garnet; both were filled with Alpine garnet along overgrowths and fractures. Fluid‐mediated intergranular element transport, enhanced by deformation, appears crucial in transforming the Variscan garnet into a grossular richer composition during Alpine subduction‐zone metamorphism. At such conditions, dissolution–reprecipitation appears to be a much more effective mechanism for modifying garnet compositions than diffusion. Amphibolite facies conditions are typical for Variscan basement relics exposed in central Cycladic and Dodecanese islands as well as in eastern Crete. The Samos metapelites studied comprise a north‐eastern extension of these basement occurrences.     

渤海湾盆地晚中生代-新生代伸展和走滑构造及深部背景

渤海湾盆地是一个在早白垩世被动裂陷盆地基础上发育起来的新生代主动裂陷盆地, 走滑作用贯穿始终, 特别是在兰聊-盐山断层以东, 使这个裂陷盆地具有鲜明的走滑特征。伸展和走滑作用此消彼长, 伸展构造和走滑构造相互叠加、转换, 垂向上相互叠置、交切, 并由此导致变换带的产生。晚中生代以来太平洋板块向欧亚板块俯冲的方向和速度变化、后撤以及板片窗效应、中始新世印欧板块碰撞导致的地幔上涌是控制盆地形成的深部背景, 郯庐断裂带早白垩世强烈的左行走滑、古新世-早始新世弱的左行走滑以及中始新世后的右行走滑活动也深刻地控制和影响着盆地的发育, 盆地内晚中生代-新生代的伸展和走滑构造的演化则是其浅部响应, 并由此控制着岩浆活动以及油气生成、运聚和分布的时空迁移。     

Paleozoic tectonostratigraphic units of the northwest and central Dinarides and the adjoining South Tisia

In the Central Dinarides and South Tisia different Paleozoic complexes occur in four geotectonic zones: (1) comparatively autochthonous units located in the cores of disrupted anticlines of the External Dinarides; (2) allochthonous disrupted units accompanied by more predominant Triassic formations in the Sava Nappe, which is thrust onto the northeastern margin of the External Dinarides; (3) allochthonous disrupted units, also together with Triassic formations, in the Pannonian and Durmitor nappes of the Internal Dinarides; and (4) polymetamorphic sequences in basement of the Pannonian Basin and South Tisia, respectively. This paper presents basic geological features for the main Paleozoic areas included in these four zones. The tectonostratigraphic units of the first two zones were related to the Gondwana passive continental margin, those of the third zone to the Paleotethyan oceanic realm, and those of Tisia to the active Laurussia margin. Geodynamic evolution of all these Paleozoic complexes was related to opening and closure of the Rheic and Paleotethys Oceans. Rifting processes along North Gondwana started in the Silurian, locally in the Cambrian-Ordovician, and were followed by the Late Silurian/Devonian opening of the Paleotethys. Subduction processes were active by the end of the Devonian and at the beginning of the Carboniferous along the Laurussia margin. They were followed during the Westphalian by main Variscan deformation during collision of Gondwana and Laurussia. Associated metamorphism was very low-grade in the Paleozoic units of the Sava Nappe, low-grade to epidote-amphibolite grade within the Paleozoic complexes of the Pannonian and Durmitor nappes in the Internal Dinarides, and poly-metamorphic with migmatites and granitoids in South Tisia. These processes gave rise to a Pangea stage with the Variscan basement disconformably overlain by Late Carboniferous and Permian sediments.     

Prograde eclogite in the Gföhl Nappe, Czech Republic: new evidence on Variscan high-pressure metamorphism

A layer of relict, high-temperature, prograde eclogite has been discovered within felsic granulite of the Gföhl Nappe, which is the uppermost tectonic unit in the Moldanubian Zone of the Bohemian Massif, the easternmost of the European Variscan massifs. Pressure-temperature conditions for eclogite (≥890  °C, 18.0  kbar) and felsic granulite ( c . 1000  °C, 16  kbar) place early metamorphism of the polymetamorphic Gföhl crustal rocks within the eclogite facies, and preservation of prograde compositional zoning in small garnet grains in high-temperature eclogite requires very rapid heating, as well as cooling. Mantle-derived garnet and spinel–garnet peridotites are associated with the high temperature-high pressure crustal rocks in the Gföhl Nappe, and this distinctive lithological suite appears to be unique among European Phanerozoic orogenic belts, implying that tectonic processes during the late stages in evolution of the Variscan belt were different from those in the Caledonian and Alpine belts. The unusually high temperatures and pressures in Gföhl crustal rocks, mineralogical evidence for rapid heating and cooling, juxtaposition of lithospheric and asthenospheric mantle with crustal rocks, and widespread production of late-stage granites indicate that culmination of the Variscan Orogeny may have been driven by lithospheric delamination and asthenospheric upwelling.     

Syntectonic crustal melting and high-grade metamorphism in a transpressional regime, Variscan Massif Central, France

Hot collisional orogens are characterized by abundant syn-kinematic granitic magmatism that profoundly affects their tectono-thermal evolutions. Voluminous granitic magmas, emplaced between 360 and 270 Ma, played a visibly important role in the evolution of the Variscan Orogen. In the Limousin region (western Massif Central, France), syntectonic granite plutons are spatially associated with major strike–slip shear zones that merge to the northwest with the South Armorican Shear Zone. This region allowed us to assess the role of magmatism in a hot transpressional orogen. Microstructural data and U/Pb zircon and monazite ages from a mylonitic leucogranite indicate synkinematic emplacement in a dextral transpressional shear zone at 313 ± 4 Ma. Leucogranites are coeval with cordierite-bearing migmatitic gneisses and vertical lenses of leucosome in strike–slip shear zones. We interpret U/Pb monazite ages of 315 ± 4 Ma for the gneisses and 316 ± 2 Ma for the leucosomes as the minimum age of high-grade metamorphism and migmatization respectively. These data suggest a spatial and temporal relationship between transpression, crustal melting, rapid exhumation and magma ascent, and cooling of high-grade metamorphic rocks.Some granites emplaced in the strike–slip shear zone are bounded at their roof by low dip normal faults that strike N–S, perpendicular to the E–W trend of the belt. The abundant crustal magmatism provided a low-viscosity zone that enhanced Variscan orogenic collapse during continued transpression, inducing the development of normal faults in the transpression zone and thrust faults at the front of the collapsed orogen.     

Durbachites–Vaugnerites – a geodynamic marker in the central European Variscan orogen

Durbachites–Vaugnerites are K–Mg‐rich magmatic rocks derived from an enriched mantle source. Observed throughout the European Variscan basement, their present‐day geographical distribution does not reveal any obvious plate‐tectonic context. Published geochronological data show that most durbachites–vaugnerites formed around 335–340 Ma. Plotted in a Visean plate‐tectonic reconstruction, the occurrences of durbachites–vaugnerites are concentrated in a hotspot like cluster in the Galatian superterrane, featuring a distinctive regional magmatic province. Reviewing the existing local studies on Variscan durbachite–vaugnerite rocks, we interpret their extensive appearance in the Visean in terms of two factors: (i) long‐term mantle enrichment above early Variscan subduction systems; and (ii) melting of this enriched subcontinental mantle source during the Variscan collision stage due to thermal anomalies below the Galatian superterrane, possibly created by slab windows and and/or the sinking of the subducted Rheic slab into the mantle. The tectonic reorganization of Europe in the Late Palaeozoic and during the Alpine orogeny has torn apart and blurred this marked domain of durbachites–vaugnerites.     

Late Variscan exhumation histories of the southern Rhenohercynian Zone and western Mid-German Crystalline Rise: results from thermal modeling

Thermal modeling techniques constrained by published petrological and thermo-chronometric data were applied to examine late orogenic burial and exhumation at a Variscan suture zone in Central Europe. The suture separates the southern Rhenohercynian zone from the Mid-German Crystalline Rise and traces the former site of a small oceanic basin. Closure of this basin during Variscan subduction and subsequent collision of continental units were responsible for different tectono-metamorphic evolutions in the suture's footwall and hanging wall. Relative convergence rates between the southern Rhenohercynian zone and western Mid-German Crystalline Rise can be inferred from the pressure-temperature-time evolution of the Northern Phyllite Zone. During Late Viséan-Early Namurian times, horizontal thrusting velocities were at least 20 mm/a. Thermal modeling suggests that exhumation of the Mid-German Crystalline Rise occurred temporarily at rates of more than 3 mm/a. Such rapid exhumation cannot be produced by erosion only, but requires a substantial contribution of extensional strain. Exhumation by upper crustal extension occurred contemporaneously with convergence and is explained by continuous underplating of crustal slices and thrusting along faults with ramp-flat geometry. Finally, implications for the tectono-metamorphic history of the study area and the thermal state of the crust during late Variscan exhumation are discussed.     

Single subduction zone for the generation of Devonian ophiolites and high‐P metamorphic belts of the Variscan Orogen (NW Iberia)

Within the Variscan Orogen, Early Devonian and Late Devonian high‐P belts separated by mid‐Devonian ophiolites can be interpreted as having formed in a single subduction zone. Early Devonian convergence nucleated a Laurussia‐dipping subduction zone from an inherited lithospheric neck (peri‐Gondwanan Cambrian back‐arc). Slab‐retreat induced upper plate extension, mantle incursion and lower plate thermal softening, favouring slab‐detachment within the lower plate and diapiric exhumation of deep‐seated rocks through the overlying mantle up to relaminate the upper plate. Upper plate extension produced mid‐Devonian suprasubduction ocean floor spreading (Devonian ophiolites), while further convergence resulted in plate coupling and intraoceanic ophiolite imbrication. Accretion of the remaining Cambrian ocean heralded Late Devonian subduction of inner sections of Gondwana across the same subduction zone and the underthrusting of mainland Gondwana (culmination of NW Iberian allochthonous pile). Oblique convergence favoured lateral plate sliding, and explained the different lateral positions along Gondwana of terranes separated by Palaeozoic ophiolites.     

Early Paleozoic accretionary orogens along the Western Gondwana margin

Early Paleozoic accretionary orogens dominated the Western Gondwana margin and were characterized by nearly continuous subduction associated with crustal extension and back-arc basin development.The southwestern margin is represented by Famatinian and Pampean basement realms exposed in South America,both related to the protracted Paleozoic evolution of the Terra Australis Orogen,whereas the northwestern margin is mainly recorded in Cadomian domains of Europe and adjacent regions.However,no clear relationships between these regions were so far established.Based on a compilation and reevaluation of geological,paleomagnetic,petrological,geochronological and isotopic evidence,this contribution focuses on crustal-scale tectonic and geodynamic processes occurring in Western Gondwana accretionary orogens,aiming at disentangling their common Early Paleozoic evolution.Data show that accretionary orogens were dominated by high-temperature/lowpressure metamorphism and relatively high geothermal gradients,resulting from the development of extended/hyperextended margins and bulk transtensional deformation.In this sense,retreating-mode accretionary orogens characterized the Early Paleozoic Gondwana margin,though short-lived pulses of compression/transpression also occurred.The existence of retreating subduction zones favoured mantle-derived magmatism and mixing with relatively young(meta)sedimentary sources in a thin continental crust.Crustal reworking of previous forearc sequences due to trenchward arc migration thus took place through assimilation and anatexis in the arc/back-arc regions.Therefore,retreating-mode accretionary orogens were the locus of Early Paleozoic crustal growth in Western Gondwana,intimately associated with major flare-up events,such as those related to the Cadomian and Famatian arcs.Slab roll back,probably resulting from decreasing convergence rates and plate velocities after Gondwana assembly,was a key factor for orogen-scale geodynamic processes.Coupled with synchronous oblique subduction and crustal-scale dextral deformation,slab roll back might trigger toroidal mantle flow,thus accounting for bulk dextral transtension,back-arc extension/transtension and a large-scale anticlockwise rotation of Gondwana mainland.     

Late evolution of the southern European Variscan belt: Exhumation of the lower crust in a context of oblique convergence

The south-eastern part of the European Variscan belt forms a zone composed of several crystalline segments: the External Crystalline Massifs of the western Alps, the Maures-Tanneron massif, also Corsica and Sardinia, which are mutually displaced due to the Alpine deformation of the European Paleozoic lithosphere. All these crystalline fragments record similar structural, metamorphic, geochronological and magmatic histories during Paleozoic times. In particular, the Late Carboniferous period (～320–300 Ma) is characterized by crustal-scale folding associated with strike-slip faulting and intracontinental basin formation. In this transpressive context, dome structures exhume partially-molten crust in convergent setting, which is in contradiction with generally accepted models of late orogenic collapse of the Variscan belt. It is suggested that this particular transpressive–obliquely convergent template, exemplified by tectonometamorphic evolution of the Maures-Tanneron massif, is valid for the whole eastern European Variscan margin.