强震前地震活动图象与震源机制类型的相关性分析

在对1966年以来63次强震前中等地震活动图象全时空扫描的基础上,讨论了大陆不同构造区域、不同震源机制强震前中等地震活动图象异常演化特征及其主要活动图象与震源机制节面的相关性. 研究表明:强震前中等地震活动图象显现出应力集中和减弱两个阶段性特征,第一阶段（中期阶段）的活动图象以条带、空区和集中活跃为主;第二阶段（中短期）以持续平静为主. 走滑和正断层机制震前显示出较好的特征图象;逆冲断层震前的活动图象与其它两种机制的图象不同,没有明显的特征图象,两个阶段都有平静现象出现. 强震前中等地震条带走向与震源机制的两个节面走向一致性较好,但空区的一致性较差.      

首都圈地震活动构造成因的小震精定位分析

应用双差地震定位法对首都圈及其邻区1980～2004年发生的地震进行重新定位,进行首都圈的地震构造成因分析表明：重定位的地震表现为与区域构造更为密切的“井”字形活动分布,地震震源分布证实了人工地震勘探所推断的深大断裂的存在;首都圈地区的地震多发生于地壳的中、上部,可能存在局域构造块体运动变形和深部构造动力作用的二种不同地震构造成因;地震活动图像表明中强震易发生在上下地壳相交的脆－韧性转换带中,并揭示了首都圈地区潜在的地震空区和陡倾角的隐伏断层.     

2013年8月香格里拉德钦—得荣M_S5.9地震序列震源机制与应力场特征

利用中国区域台网地震波形记录,采用CAP方法反演了香格里拉德钦(位于云南省)—得荣(属于四川省)2013年8月28日MS5.1、8月31日MS5.9地震及8次MS4余震的震源双力偶断层面解和震源质心深度.结合震区地质构造、余震分布、烈度分布、动力学背景等资料,分析了此次地震序列的震源机制和应力场特征.反演结果表明,此次地震序列为节面倾角倾斜的正断层型地震,发震断层为NWW向活动构造带.序列中最大地震MS5.9和次大地震MS5.1地震的破裂节面分别为走向299°、倾角53°、滑动角-73°;走向290°、倾角55°、滑动角-72°.震源区受到强烈的水平拉张力、垂直挤压力作用.MS5.9地震后续余震T、P轴方位角随时间变化强烈,表明MS5.9地震后震源区应力调整作用明显.震源区应力场反演结果显示,地震发生的构造带上最大主拉应力为NNE-SSW向,最大主压应力为NW-SE向,与GPS观测所反映的地表最大主应力分布方向基本一致,表明震源区的应力状态可能主要受到背景大尺度构造应力场的控制.此次地震序列填充了川滇地区震源机制及应力场的空间分布图像,1976年以来可靠的震源机制解资料表明香格里拉次级块体是川滇块体及周边区域显著的拉张作用区域.香格里拉次级块体和保山次级块体正断层地震的断层节面及震源应力轴分布的空间变化,与GPS观测反映的地表最大主拉应力分布较一致,其空间分布特征反映了在青藏高原物质挤出背景下,块体之间相互作用、地势差异等作用对构造活动的影响.     

安宁河-则木河-小江带的强震构造环境和运动速率

研究了安宁河——则木河一小江断裂带的强震构造环境和展源力学机制；据该带历史强震计算分析了地震短张量年速率；据该带跨断层形变观测资料分析了断裂带水平和垂直形变年速率；并就潜在地展危险性进行了讨论.     

Recent Crustal Stress Field and Dislocation Along Seismic Faults in the East China Region

INTRODUCTIONThere exist many methods for studying recent crustal stress field.One of the most commonmethodsis to use focal mechanismsolution data of earthquakes to deduce the recent crustal stressfield.The method is simple and feasible and the data obtained is reliable.Yan Jiaquan,et al.(1979)usedthe method to study the recent tectonic stress field in China and its adjacent areas andgave a rough configuration and regional characteristics of the stress field.Li Qinzu(1980),WeiGuangxing,e…     

The Rupture Process of the Manjil,Iran Earthquake of 20 June 1990 and Implications for Intraplate Strike-Slip Earthquakes

In terms of seismically radiated energy or moment release, the earthquake of 20 January 1990 in the Manjil Basin-Alborz Mountain region of Iran is the second largest strike-slip earthquake to have occurred in an intracontinental setting in the past decade. It caused enormous loss of life and the virtual destruction of several cities. Despite a very large meizoseismal area, the identification of the causative faults has been hampered by the lack of reliable earthquake locations and conflicting field reports of surface displacement. Using broadband data from global networks of digitally recording seismographs, we analyse broadband seismic waveforms to derive characteristics of the rupture process. Complexities in waveforms generated by the earthquake indicate that the main shock consisted of a tiny precursory subevent followed in the next 20 seconds by a series of four major subevents with depths ranging from 10 to 15 km. The focal mechanisms of the major subevents, which are predominantly strike-slip, have a common nodal plane striking about 285°–295°. Based on the coincidence of this strike with the dominant tectonic fabric of the region we presume that the EW striking planes are the fault planes. The first major subevent nucleated slightly south of the initial precursor. The second subevent occurred northwest of the initial precursor. The last two subevents moved progressively southeastward of the first subevent in a direction collinear with the predominant strike of the fault planes. The offsets in the relative locations and the temporal delays of the rupture subevents indicate heterogeneous distribution of fracture strength and the involvement of multiple faults. The spatial distribution of teleseismic aftershocks, which at first appears uncorrelated with meizoseismal contours, can be decomposed into stages. The initial activity, being within and on the periphery of the rupture zone, correlates in shape and length with meizoseismal lines. In the second stage of activity the aftershock zone expands and appears to cluster about the geomorphic and geologic features several tens of kilometres from the rupture zone. The activity is interpreted as a regional response to quasistatic stress migration along zones of tectonic weakness. The radiated energy of the main shock and the estimate of seismic moment yields an apparent stress of 20 bars. High apparent stress may be typical of strike slip earthquakes occurring in intracontinental environments undergoing continental collision.     

Stress tensor and focal mechanisms in the Dead Sea basin

We use the recorded seismicity, confined to the Dead Sea basin and its boundaries, by the Dead Sea Integrated Research (DESIRE) portable seismic network and the Israel and Jordan permanent seismic networks for studying the mechanisms of earthquakes in the Dead Sea basin. The observed seismicity in the Dead Sea basin is divided into nine regions according to the spatial distribution of the earthquakes and the known tectonic features. The large number of recording stations and the adequate station distribution allowed the reliable determinations of 494 earthquake focal mechanisms. For each region, based on the inversion of the observed polarities of the earthquakes, we determine the focal mechanisms and the associated stress tensor. For 159 earthquakes, out of the 494 focal mechanisms, we could determine compatible fault planes. On the eastern side, the focal mechanisms are mainly strike-slip mechanism with nodal planes in the N-S and E-W directions. The azimuths of the stress axes are well constrained presenting minimal variability in the inversion of the data, which is in agreement with the Eastern Boundary fault on the east side of the Dead Sea basin and what we had expected from the regional geodynamics. However, larger variabilities of the azimuthal and dip angles are observed on the western side of the basin. Due to the wider range of azimuths of the fault planes, we observe the switching of σ₁ and σ₂ or the switching of σ₂ and σ₃ as major horizontal stress directions. This observed switching of stress axes allows having dip-slip and normal mechanisms in a region that is dominated by strike-slip motion.     

2013年河北赞皇小震群活动特征及其指示意义

河北省数字地震台网在2013年5月19日至7月15日记录到河北赞皇县发生震群活动,ML-0.9级以上地震229次。震群附近30km之内之前没有发生过5级以上地震,1966年邢台7.2级地震区呈北北东向分布,在其南部存在北西向分支,抵达赞皇附近,发生过少量ML1~2级小震。与较为平静的地震活动背景相比,赞皇震群尤为突出。通过分析震级—频度关系,震群呈现低b值特征;利用振幅比法反演震群ML2级以上11个基本一致的震源机制解,并进一步反演震源区应力场,结果与华北构造应力场完全吻合。结果显示,震群呈北北东方向分布,震源机制也有相应的节面对应,大多数倾向北西西,表明震群为右旋走向滑动。同时,低b值和震源机制一致属于震兆现象,应注意加强赞皇附近区域的震情跟踪研究。     

川滇地区较长时间尺度的地震活动盛衰交替性

通过与更早地震资料的对比, 研究了鲜水河断裂带, 川滇地壳块体东带、 西带, 松潘、 龙门山断裂带以及整个川滇地区较长时间尺度的地震活动盛衰交替性。 结果表明, 川滇东带北段(鲜水河断裂带)、 松潘、 龙门山地震带及川滇西带中段和南段(主要是红河断裂带)的地震活动具有明显的几十到百年尺度的盛衰交替性。 而川滇东带中南段(安宁河-则木河-小江断裂带)与川滇西带北段(金沙江断裂带)在上述地震带的平静期里, 中强以上地震频次明显减少, 但有个别7级以上强震发生。 这样, 整个川滇地区地震活动的盛衰交替性呈现一种比较复杂的阶段性特征: 伴随频繁中强震的强震活跃期与突发强震活动期交替出现。 值得注意的是, 川滇地区从19世纪末开始的伴随频繁中强震的强震活跃期已超过百年, 目前出现长期平静, 应注意进入突发强震活动期的可能性。 根据川滇地区上一个突发强震活动期突发强震的空间分布, 推测未来的突发强震可能发生在南北向断裂带, 或其他方向断裂带与南北向断裂带的交汇部。 文中还对上述统计现象的机理作了简要讨论。     

Analysis on the Characteristics of the Kalpin MS5.3 Earthquake Sequence of December 1, 2013 and Anomalies before the Earthquake

This paper introduces the basic parameters, focal mechanism solutions and earthquake sequence characteristics of the Kalpin M_S5.3 earthquake sequence of December 1, 2013, and analyzed seismic activity before the earthquake, the adjacent tectonic features and the precursory anomaly at fixed points within a range of 200km. Research indicates:(1) The earthquake occurred on Kalpin fault, the source rupture type is thrust faulting with sinistral strike-slip component. (2) The earthquake sequence is mainshock-aftershock type, with the aftershock distribution attenuating quickly and trending NE. (3) Abnormal seismic activity before the earthquake was characterized by seismically nesting quiescence of M_S2.0-4.0 earthquakes, seismic quiescence of M_S4.0 earthquakes and seismic belts of M_S3.0 earthquakes in the Kalpin block, abnormal enhancement zone of moderate earthquakes on Puchang fault and seismological parameters. (4) Anomalies of precursory observation data at fixed stations are mainly characterized by mutation. Apart from the borehole tiltmeter in Halajun, the spatial distribution of other abnormal precursors showed a phenomenon of migration from the near field to far field and from the epicenter to the peripheries.     

STUDY ON THE SEISMOGENIC FAULT AND DYNAMICS PARAME-TERS OF THE 2014 MS6.6 JINGGU EARTHQUAKE IN YUNNAN

On October 17, 2014, a M_S6.6 earthquake occurred in Jinggu, Yunnan. The epicenter was located in the western branch of Wuliang Mountain, the northwest extension line of Puwen Fault. There are 2 faults in the surrounding area, one is a sinistral strike-slip and the other is the dextral. Two faults have mutual intersection with conjugate joints property to form a checkerboard faulting structure. The structure of the area of the focal region is complex. The present-day tectonic movement is strong, and the aftershock distribution indicates the faulting surface trending NNW. There is no obvious surface rupture related to the known fault in the epicenter, and there is a certain distance from the surface of the Puwen fault zone. Regional seismic activity is strong. In 1941, there were two over magnitude 7.0 earthquakes in the south of the epicenter of Jinggu County and Mengzhe Town. In 1988, two mainshock-aftershock type earthquakes occurred in Canglan-Gengma Counties, the principal stress axes of the whole seismic area is in the direction of NNE. Geological method can be adopted to clarify the distribution of surficial fracture caused by active faults, and high-precision seismic positioning and spatial distribution characteristics of seismic sequences can contribute to understand deep seismogenic faults and geometric features. Thus, we can better analyze the three-dimensional spatial distribution characteristics of seismotectonics and the deep and shallow tectonic relationship. The focal mechanism reveals the property and faulting process to a certain extent, which can help us understand not only the active property of faults, but also the important basis for deep tectonic stress and seismogenic mechanism. In order to study the fault characteristic of the Jinggu earthquake, the stress field characteristics of the source area and the geometric parameters of the fault plane, this paper firstly uses the 15 days aftershock data of the Jingsuo M_S6.6 earthquake, to precisely locate the main shock and aftershock sequences using double-difference location method. The results show that the aftershock sequences have clustering characteristics along the NW direction, with a depth mainly of 5~15km. Based on the precise location, calculations are made to the focal mechanisms of a total of 46 earthquakes including the main shock and aftershocks with M_L ≥ 3.0 of the Jinggu earthquake. The double-couple(DC)component of the focal mechanism of the main shock shows that nodal plane Ⅰ:The strike is 239°, the dip 81°, and the rake -22°; nodal plane Ⅱ, the strike is 333°, the dip 68°, and the rake -170.31°. According to focal mechanism solutions, there are 42 earthquakes with a focal mechanism of strike-slip type, accounting for 91.3%. According to the distribution of the aftershock sequence, it can be inferred that the nodal plane Ⅱ is the seismogenic fault. The obtained focal mechanism is used to invert the stress field in the source region. The distribution of horizontal maximum principal stress orienation is concentrated. The main features of the regional tectonic stress field are under the NNE-SSW compression(P axis)and the NW-SE extension(T axis)and are also affected by NNW direction stress fields in the central region of Yunnan, which indicates that Jinggu earthquake fault, like Gengma earthquake, is a new NW-trending fault which is under domination of large-scale tectonic stress and effected by local tectonic stress environment. In order to define more accurately the occurrence of the fault plane of the Jinggu earthquake, with the precise location results and the stress field in the source region, the global optimal solution of the fault plane parameters and its error are obtained by using both global searching simulated annealing algorithm and local searching Gauss-Newton method. Since the parameters of the fault plane fitting process use the stress parameters obtained by the focal mechanism inversion, the data obtained by the fault plane fitting is more representative of the rupture plane, that is, the strike 332.75°, the dip 89.53°, and the rake -167.12°. The buried depth of the rupture plane is 2.746km, indicating that the source fault has not cut through the surface. Based on the stress field characteristics and the inversion results of the fault plane, it is preliminarily believed that the seismogenic structure of the Jinggu earthquake is a newly generated nearly vertical right-lateral strike-slip fault with normal component. The rupture plane length is about 17.2km, which does not extend to the Puwen fault zone. Jinggu earthquake occurred in Simao-Puer seismic region in the south of Sichuan-Yunnan plate. Its focal mechanism solution is similar to that of the three sub-events of the Gengma earthquake in November 1988. The seismogenic structure of both of them is NW-trending and the principal stress is NE-SW. The rupture plane of the Jinggu main shock(NW direction)is significantly different from the known near NS direction Lancang Fault and the near NE direction Jinggu Fault in the study area. It is preliminarily inferred that the seismogenic structure of this earthquake has a neogenetic feature.     

南天山强震前小震活动的有序分布

小震活动有序图像是一种重要的以小震报强震的预报方法。通过对南天山西段强地震前小震活动有序图像进行研究,着重分析了图像与构造、与地震发生的时间、位置以及震源机制之间的联系。认为有序图像是区域应力沿构造快速调整、分布的结果,既可能反映发震构造带的活动,也可起到控震作用,图像受地震的断错性质影响,具一定的中期前兆意义。     

川滇地区7级大震前中强震震源机制变化

分析了 70年代以来 ,川滇地区发生的 8次 7级大震前 5年内 ,发生在大震孕震区和震源区内的中强震震源机制解时空分布。结果表明 ,最早中强震发生在大震震源区或其附近 ,其发震应力场与区域构造应力场一致 ,与大多数大震发震应力场一致或接近。大多数中强震震源破裂特征与大震明显不同。之后有多次中强震发生在距大震震源区较远的大震孕震区内其他地方 ,它们的发震应力场往往经历了与区域构造应力场和大震应力场一致与不一致的多次交替变化。大震前最后 1个中强震也发生在距大震震源区较近的地方 ,其发震应力场与大震发震应力场明显不一致 ,偏转了 30°～ 5 0° ,或更多 ,大多数也与区域构造应力场不一致 ,有的中强震发震断裂破裂特征与大震不一致。大震前中强震震源机制的变化 ,反映了大震孕育过程的不同阶段 ,区域构造应力场的时空调整变化和增强过程 ,以及由此引发的构造断裂异常活动 ,揭示出与大震发生有关的应力场和震源破裂特征信息     

发震构造的第三种型式

提出了一种新的发震构造型式－转换破型型。其特征是地震不发生在主干断裂和共轭断裂面上，而是在其两侧一定距离的岩块中；发震断裂不与其平行而是成一定的交角；震源机制解的三个力轴与造力应场相对应的三个力轴不一致，而是有规律地旋转了一定有角度。     

2022年1月8日青海门源MS6.9地震序列重定位和震源机制解研究

2022年1月8日青海省海北州门源县发生M_S6.9地震,震后产生了长约22 km的地表破裂带,青海、甘肃和宁夏等多地震感强烈。本文基于区域地震台网资料,通过多阶段定位方法对门源M_S6.9地震早期序列（2022年1月8日至12日）进行了重定位,并利用gCAP方法反演了主震和M_S≥3.4余震的震源机制和震源矩心深度,计算了现今应力场体系在门源M_S6.9地震震源机制两个节面产生的相对剪应力和正应力。结果表明:门源M_S6.9地震的初始破裂深度为7.8 km,震源矩心深度为4 km,地震序列的优势初始破裂深度主要介于7—8 km之间,而M_S≥3.4余震的震源矩心深度为3—7 km;该地震序列的震源深度剖面显示震后24个小时内的地震序列长度约为25 km,与地表破裂带的长度大体一致,整体地震序列长度约为30 km,其中1月8日M_S6.9主震和M_S5.1余震位于余震区西段,1月12日M_S5.2余震位于余震区东段。2022年1月8日门源M_S6.9主震的震源机制解节面Ⅰ为走向290°、倾角81°、滑动角16°,节面Ⅱ为走向197°、倾角74°、滑动角171°,根据余震展布的总体趋势估计断层面走向为290°,表明此次地震为近乎直立断层面上的一次左旋走滑型事件;M_S≥3.4余震的震源机制解显示这些地震主要为走滑型地震,P轴走向从余震区西段到东段之间大体呈现NE向到EW向的变化。现今应力场体系在门源M_S6.9主震震源机制解节面Ⅰ上产生的相对剪应力为0.638,而在节面Ⅱ上的相对剪应力为0.522,表明这两个节面均非构造应力场的最大释放节面,这与2016年门源M_S6.4地震逆冲型震源机制为构造应力场的最优释放节面有着明显差异。结合地质构造、震源机制和余震展布,2022年1月8日门源M_S6.9主震的发震构造可能为冷龙岭断裂西段,其地震断层错动方式为左旋走滑。根据重定位结果、震级-破裂关系以及剪应力结果,本文认为门源地区存在一定的应力积累且应力未得到充分释放,该地区仍存在发生强震的危险。      

利用GPS观测研究山西断陷带现今构造应力场变化与地震活动

基于1999—2007年山西断陷带GPS站点位移速率,采用格林函数法计算了山西断陷带地壳10 km深处的最大主应力和最大剪应力变化,并与区域地质构造、中强地震活动及其震源机制解等对比分析,结果表明:山西断陷带中强地震活动受区域构造应力场的控制,现今应力场变化强烈的区域,地震活动水平相对较高,地震震源机制与构造应力场变化特征一致性较强;构造应力场变化和中强地震活动还受构造相关区强震活动的影响,2009年以来忻定盆地原平段至石岭关隆起区中强地震活跃可能与汶川8.0级地震影响有关;山西南部尤其是运城盆地具有较高的背景应力水平,应进一步关注该区域的地震危险性。     

汶川Mw7.9和集集Mw7.6地震前应力场转换现象及其可能的前兆意义

2008年四川汶川Mw7.9地震和1999年台湾集集Mw7.6地震均为挤压推覆构造环境下发生的板内逆断层型地震.通过对比分析2次地震前的CMT解、震源区附近的中小地震震源机制解及其反演的应力场可知,集集地震主震震源机制解与用台湾内陆中西部的CMT解反演得到的逆断层类型构造应力场吻合,而在主震前震源区附近中小地震震源机制...     

三峡库区秭归与巴东交界Ms4.0地震矩张量及应力环境研究

三峡库区湖北秭归与巴东交界地区2013年以来发生5次Ms4.0以上地震.本文基于湖北、重庆等省属13个测震台站宽频带波形数据,采用kiwi软件包和rapidinv12程序反演了这些地震的全矩张量解,结果显示所有地震双力偶解均为走滑兼逆断性质,两个节面走向、倾角、滑动角与P、T轴走向和倾俯角的一致性均较好,主压应力P轴N...     

海城、盖州地区地震震源机制及一致性参数特征研究

本文选取辽宁海城、 盖州地区(40°~41°N, 122°~123°E)作为研究区, 利用广义极性振幅技术(GPAT)方法, 反演得到研究区2012—2017年6月共184个地震震源机制解, 并利用Misfit角度分析震源机制一致性参数特征。 研究结果表明: ① 研究区地震震源机制解以走滑型和正断型为主。 海城地区地震震源机制解以NW—SE向节面的左旋走滑型和NWW向节面的正断型为主。 发震构造以NW向海城河断裂为主, NE向节面为主的地震可能受到NE向金州断裂带的控制。 ② 青石岭地区的发震构造为与九寨—盖县北段共轭的NW向未知断裂, 西海域的地震活动可能是NE向的雁式断裂和NW向共轭的未知断裂共同作用的结果。 ③ 震源机制一致性结果显示, 一致性增强后发生了震级相对较大的地震。 研究区的震源机制一致性较强, 表明该区域的应力较为集中。 但由于2016年以来活动趋于平静, 尚难以根据震源机制解一致性程度做出当前应力状态的判断。     

DISCUSSION ON THE SEISMOGENIC STRUCTURE OF THE 2016 MENYUAN M6.4 EARTHQUAKE IN MENYUAN,QINGHAI

On January 21, 2016, a M6.4 earthquake occurred in Menyuan county, Qinghai Province. Its epicenter is located in the Qilian-Hexi Zoulang tectonic zone, which records several moderate-large historical earthquakes. Previous studies on this event are based on geology, remote sensing data and focal mechanism solutions, lacking analysis on its seismogenic structure. In order to study seismogenic fault plane and seismoteconic style of the earthquake, this work uses data of seismic intensity, aftershocks, and geology to address this issue. Furthermore, we calculate Coulomb stress changes imposed by the 1927 Gulang M8 and 1986 Menyuan M6.4 earthquake on the fault plane of the 2016 Menyuan M6.4 earthquake. The results indicate the early two events have posed distinct impacts on two nodal planes:loading or triggering on nodal plane Ⅰ, and unloading or delay on Ⅱ. In some cases such triggering stress is approaching or up to the threshold value of 0.01 MPa. Combining isoseismals, aftershock distribution, geological structure and different Coulomb stress changes aforementioned, the nodal plane Ⅱ of the source model is considered the seismogenic feature. In conjunction with geophysical data, we establish the seismogenic model of the Menyuan earthquake, which is a positive flower structure in a profile, gentle in the upper and steep in the lower, characterized by thrusting in a strike slipping fault system. This is a possible model for thrusting earthquakes generated by strike-slip faults in a compressional tectonic regime.