Characteristic mineralogy of the Zhutishi granite:Implication for petrogenesis of the late intrusive granite

Many granitic batholiths occur in the form of com-plexes, presented principally by a temporal-spacial association between two stages of intrusion, in the Nanling region. Compared with main intrusive gran-ites, late intrusive granites are characterized by fine- grained texture, Si- and Al-enriched composition, and small occurrence as stock or apophysis. On the basis of its rock chemistry (e.g., increasing aluminium saturation index) and geochemistry (e.g., Eu depletion, decreasing concentratio…     

浙江青田石平川钾长花岗岩特征及其成因探讨

青田县石平川钼矿床是浙江省现已发现的规模最大的钼矿床,多数人认为石平川钼矿床的形成与钾长花岗岩有密切关系。本文主要从岩相学、岩石地球化学、LA—ICPMS锆石U—Pb年代学等方面研究石平川钾长花岗岩,并探讨其成岩环境及成因。研究表明,石平川岩体属于高钾钙碱性、弱过铝质S型花岗岩,其形成于早自垩世晚期挤压环境,源岩物质主要是壳源,并有少部分幔源物质成分参与。     

新疆阿尔泰成矿带可可塔勒花岗岩体锆石LA-ICP-MSU-Pb年龄及其地质意义

新疆阿尔泰成矿带花岗岩发育,其中很多花岗岩与成矿作用有着密切的联系,特别是400Ma左右的岩浆活动是阿尔泰地区一次重要的岩浆成矿活动,阿尔泰许多金属矿床与这一时期的岩浆构造作用有关。本次研究的出露于可可塔勒铅锌矿区的黑云母花岗岩体,其锆石LA-ICPMSU-Pb年龄为（401．8士1．5）Ma,表明可可塔勒花岗岩是阿尔泰成矿带400Ma左右发生的一次重要岩浆构造作用的产物,该黑云母花岗岩体侵入于矿区下泥盆统康布铁堡组火山岩地层中,岩体与围岩接触带附近的围岩蚀变明显,该黑云母花岗岩的侵入以及其后期的岩浆热液活动可能对区内成矿物质的活化、迁移、富集、成矿具有一定的贡献。     

Petrology, geochronology and tectonic implications of Mesozoic high Ba–Sr granites in the Haemi area, Hongseong Belt, South Korea

Collision between the North and South China continental blocks began in the Korean peninsula during the Permian (290–260 Ma). The Haemi area in the Hongseong collision belt (proposed as the eastern extension in South Korea of the Dabie–Sulu collision zone of China) within the Gyeonggi Massif comprises post-collisional high Ba–Sr granite with intermediate enclaves that intruded into the Precambrian rocks. The intermediate enclaves have a shoshonitic affinity whereas the granite is a high-K calc-alkaline variety. The chondrite-normalized rare earth element (REE) pattern with relative enrichment of LREE over HREE and absence of a significant negative Eu anomaly typifies both enclaves and granite. Geochemical similarities of enclaves and granite are attributed to the involvement of enriched mantle sources in their genesis. However, dominant crustal components were involved in the formation of high Ba–Sr granites. A granite crystallization age of 233 ± 2 Ma was obtained from SHRIMP U–Pb zircon dating. This age is slightly younger than the Triassic collision event in the Hongseong Belt. Geochemical data, U–Pb zircon age, and regional tectonics indicate that the Haemi high Ba–Sr granite formed in a post-collisional tectonic environment. A Mesozoic post-collisional lithospheric delamination model can account for the genesis of high Ba–Sr granite in the Haemi area.     

Early Ordovician strongly peraluminous granite in the middle section of the Yarlung Zangbo junction zone and its geological significance

LA-ICP-MS zircon U-Pb isotopic dating and rock geochemical analysis were done of the Xarru granite in the middle section of the Yarlung Zangbo junction zone.Zircon 206Pb/238U weighted mean ages of 474.9±2.3 and 478.3±1.7 Ma have been obtained for two gneiss granite samples respectively,which represent the formation age of the granite.This is the first discovery of the Early Ordovician magmatism in the Yarlung Zangbo junction zone.The rocks are high-K calcic-alkalic granite,contain tourmaline but not hornblende,with aluminum saturation index(ASI) of A/CNK1.1(1.10–1.20),and are enriched in Rb,Th and U and relatively depleted in Ba,Nb,Sr,Zr,Ti and Eu.They are strongly peraluminous S-type granite,resulting from partial melting of argillaceous components in the crust in a syn-collisional setting.According to previous studies as well as the analysis in this paper,the formation of the Xarru granite is probably related to the Andean-type orogeny in the process of subduction of the Proto-Tethys Ocean towards the Gondwanaland,and it is a product of partial melting of the thickened upper crust as a result of collision between blocks or micro-blocks in the northern margin of the Gondwana supercontinent in the process of oceanic subduction.The Xarru granite is identified as the Early Ordovician granite,indicating that the wall rocks had probably formed in the Cambrian or Precambrian.A crustal basement may exist in the Xarru region.     

A preliminary study of rare-metal mineralization in the Himalayan leucogranite belts,South Tibet

The Himalayan leucogranite occurs as two extensive (>1000 km) E-W trending belts on the Tibetan Plateau with the unique features. The leucogranite comprised biotite granite, two-mica/muscovite granite, tourmaline granite and garnet granite, which have been identified in previous studies, as well as albite granite and granitic pegmatite that were identified in this investigation. Fifteen leucogranite plutons were studied and 12 were found to contain rare-metal bearing minerals such as beryl (the representative of Be mineralization), columbite-group minerals, tapiolite, pyrochlore-microlite, fergusonite, Nb-Ta rutile (the representative of Nb-Ta mineralization), and cassiterite (the representative of Sn mineralization) mainly based on the field trip, microscope observation and microprobe analysis. The preliminary result shows that the Himalayan leucogranite is commonly related to the rare-metal mineralization and warrants future investigation. Further exploration and intensive research work is important in determining the rare-metal resource potential of this area.     

Evidence from pseudomorphous β-quartz phenocryst for decompression of rock-forming and ore-forming processes in Shapinggou porphyry Mo deposit

The Shapinggou porphyry molybdenum(Mo) deposit, located in Jinzhai County, Anhui Province, China, is the largest in the Qinling-Dabie Mo Metallogenic Belt. The intrusive rocks in the Shapinggou Mo ore district formed in the Yanshanian can be divided into two stages based on zircon U-Pb dating and geochemical features. This study focuses on the late stage intrusions(quartz syenite and granite porphyry), which are closely genetically related to molybdenum mineralization. Petrographic observations identified two quartz polymorphs in the quartz syenite and granite porphyry, which were derived from the same magmatic sources and similar evolutionary processes. The quartzes were identified as a xenomorphic β-quartz within quartz syenite, while the quartz phenocrysts within the granite porphyry were pseudomorphous b-quartz, characterized by a hexagonal bipyramid crystallography. The pseudomorphous b-quartz phenocrysts within the granite porphyry were altered from b-quartz through phase transformation. These crystals retained b-quartz pseudomorph. Combined with titanium-inzircon thermometry, quartz phase diagrams, and granitic Q-Ab-Or-H_2O phase diagrams, it is suggested that the quartz syenite and granite porphyry were formed under similar magmatic origins, including similar depths and magmatic crystallization temperatures. However, the β-quartz within quartz syenite indicated that the crystallization pressure was greater than 0.7 GPa, while the original b-quartz within the granite porphyry was formed under pressures between 0.4 and 0.7 GPa. The groundmass of the granite porphyry which formed after the phenocryst indicated a crystallizing pressure below 0.05 GPa. This indicates that the granite porphyry was formed under repetitive and rapid decompression. The decompression was significant as it caused the exsolution of the ore-forming fluids, and boiling and material precipitation during the magmatic-fluid process. The volumetric difference during the phase transformation from b-quartz to β-quartz caused extensive fracturing on the granite porphyry body and the wall rocks. As the main ore-transmitting and ore-depositing structures, these fractures benefit the hydrothermal alteration and stockwork-disseminated mineralization of the porphyry deposit. It is considered that the pseudomorphous β-quartz phenocrysts of the porphyritic body are metallogenic indicators within the porphyry deposits. The pseudomorphous β-quartzes therefore provide evidence for the formation of the porphyry deposit within a decompression tectonic setting.     

Rock pillars shaped by columnar joints in granite at Mt. Mizugaki,Central Japan

Rock pillars of granite form a special type of characteristic topography in granite, but their origin is not well understood, partly because their 3D morphology has never been well characterized. Rock pillars were investigated at Mt. Mizugaki, which is underlain by Neogene granite that intruded into the Cretaceous accretionary complex in central Japan. Three rock pillars and their surrounding areas were investigated in detail using unmanned aerial vehicle (UAV) images and structure from motion (SfM). The rock pillars were up to 70 m high and were shaped by columnar joints, which has hardly been reported before in granitic rocks. Columnar joints in granite are much larger than columnar joints in volcanic rocks. The columnar joints curved vertically, and some of them showed dipyramid shapes. The large size and curved morphology of the columnar joints may be the result of the slow cooling of the granite, compared to that of volcanic rocks. Thus, the columnar joints at Mt. Mizugaki made large, high rock pillars, which are not common in volcanic rocks.     

40Ar/39Ar isotopic ages of Qitianling granite and their geologic implications

This paper has reported the first application of 40Ar/39Ar dating to orthoclase from Qitianling granite. The resultant plateau ages yielded by three orthoclase specimens 2KL-17, 99LQ-2 and 2KL-31 (Note: The last one was taken from the part of granite which had been attributed to Cailing super-unit of the Indosinian Period by the former researchers) collected from the said granite are (139.57±2.79) Ma, (140.55±2.81) Ma and (144.91±2.90) Ma respectively. The above-mentioned ages represent the closed 40Ar/39Ar age of the orthoclase. The consistency in age dating results, the similarity in geochemical characteristics and rock textures, and the NW-SE orientation of orthoclase phenocrysts almost throughout the granite, provide evidence for the intimate relationship between the Furong super-unit and the Cailing super-unit that form the main part of the granite, suggesting that they are products of comagmatic conjugate differentiation during the Late Jurassic. This paper also makes a comparison between the Qitianling granite and the Qianlishan granite.     

大型振动台试验花岗岩相似材料配比研究

为开展秦岭翠华山等大型花岗岩地震山崩的动力响应机制研究,研发配制用于振动台物理模型试验的花岗岩相似材料是该研究工作的基础。选取铁矿粉、石英砂、重晶石粉为骨料,石膏为调节材料,松香酒精溶液为黏结剂的相似材料配比方案,设计考虑4因素5水平的正交试验,并对试验结果进行极差分析及多元线性回归拟合,获得各因素对花岗岩相似材料物理力学性质的影响结果和相似材料配比经验方程。结果表明：花岗岩相似材料的密度随铁粉与重晶石粉占骨料比的增加而增大;随着黏结剂浓度的增加,花岗岩相似材料的抗压强度、弹性模量及黏聚力均显著增大;随着石膏含量的增加,密度、抗压强度及内摩擦角均减小。该试验得到的相似材料配比经验方程可以较好地为花岗岩相似材料或其他相似材料的配制提供参考。     

江西葛源黄山铌（钽）矿床地质特征及成因分析

江西葛源黄山铌（钽）矿床位于灵山花岗岩体西侧的内外接触带上,受赣东北深大断裂及其次级北东向和北西西向断裂的控制。围岩蚀变主要为角岩化、矽卡岩化和黑鳞、铁锂云母岩化等。总体矿化特征,近岩体富铌,远岩体而富钽。     

Reconstructing the evolution of fault zone architecture: Field‐based study of the core region of the Atera Fault,Central Japan

In order to reconstruct the architectural evolution of a fault zone with heterogeneous structures, we studied the Atera Fault in Central Japan, and described the detailed mesoscopic and microscopic features of the zone. The fault zone studied consists of a 1.2‐m wide fault core of fault breccia mixed with fragments derived from welded tuff, granite, and mafic volcanic rocks. The 1.2‐m wide fault core is bordered by a western damage zone characterized by a welded tuff fault breccia and an eastern damage zone characterized by a granite cataclasite. A secondary fault core, a 30‐cm wide granite‐derived fault gouge, cross‐cuts the granite cataclasite. Although welded tuff fault breccia and granite cataclasite are also pervasively fractured and fragmented, the fault cores are significantly affected by fragment size reduction due to intense abrasive wear and comminution. The 1.2‐m wide fault core includes fragments and a sharp dark layer composed of mafic volcanic rocks, which can be correlated with neighboring 1.6 Ma volcanic rocks. This observation places a younger constraint on the age of the fault core formation. Carbonate coating on basalt fragments in the 1.2‐m wide fault core has also been fractured indicating the repetition of intense fragmentation. Bifurcated, black and gray veins near the 1.2‐m wide fault core are likely injection veins, formed by the rapid injection of fine material within fault zones during seismic events. The granite‐derived fault gouge, characterized by hard granite fragments without intense brecciation and microfracturing, in a kaolinite‐rich clay matrix, is interpreted as the most recent slip zone within the exposed fault zone. A preview of published geological and hydrological studies of several fault zones shows that clay‐rich fault cores can exhibit much lower permeability than the adjacent damage zones represented in this present case by the welded tuff fault breccia and granite cataclasite.     

Geological interpretation of gravity profiles through the Karlovy Vary granite massif (Czech Republic)

We examined the shape of the Late Variscan Karlovy Vary granite massif located south of the Ohre/Eger graben in Northern Bohemia by reinterpretation of existing gravity data on two perpendicular profiles. The granite body of about 360 km² total outcrop size has the elongation ratio 0.35 with the major axis trending NE-SW. The SW part of the body was crossed in the nineties by the seismic profile 9HR which localized the bottom of granites in a depth of about 10 km. We used this value as a reference datum in our gravity profiles. We positioned one of our profiles along the seismic profile 9HR and the other one perpendicularly, i.e. parallel with the elongation of the outcrop surface. We interpret the shape of the main granite body in the vicinity of Karlovy Vary as a continuous desk whose floor is horizontal (or subhorizontal) and varies along its whole extension about a depth of 10 km. This thickness is approximately identical with that of the Saxothuringian nappes imaged by seismic reflection. The near surface upper contact of the granite body is mildly inclined, and outward dipping. It changes to steep sides or inward inclined contacts in deeper levels. The Lesny-Lysina (Kynžvart) massif is a separate granite body about 324 km thick, not continuously connected with the main Karlovy Vary massif. The gravity curve suggests that granites often enclose in their endocontact large blocks of country metasediments or metabasites the existence of which is partly evidenced by their outcrops outside the line of the profile. The granite body is found density-homogenous. Minor density differences between granite varieties are caused mainly by more intense hydrothermal alterations in younger suite granites. We interpret vertical conduits for the ascent of granitic magmas to be parallel to the Jáchymov-Gera and Ohře (Eger) lineaments or the Mariánské Lázně fault zone as indicated by the elongation of some outcrops. However, they are not clearly imaged from the gravity data. The effect of the depression of the Sokolov basin along the faults parallel with the Ohře (Eger) lineament is shallow and it is not indicated by any change in the floor depth of the granite body. Comparison of the seismicity distribution suggests that the hypocenters occur mostly outside of the granite bodies or near their contact with the country rock.     

福建紫金山外围东留花岗斑岩体地质特征及成矿作用分析

福建紫金山及其外围地区分布的浅成-超浅成斑岩体与成矿关切密切.紫金山外围东留花岗斑岩体位于福建省武平县境内,花岗斑岩体内外接触带普遍发育强烈的矿化蚀变带.通过对东留花岗斑岩体进行野外地质调查及全岩地球化学分析,结果表明东留花岗斑岩体具有过铝质A型花岗岩的特征：富硅、钾、铁,贫钙、钠、镁,A/CNK值大于1.1,分异指数高,富集HFSE、Ga、LREE、Y（Ce）,亏损Ba、Sr、P、Ti,具有强烈的铕负异常.东留花岗斑岩体作为矿化蚀变岩石的母岩,可能为矿化作用提供热源和成矿物质,具有寻找锡多金属矿的前景.     

Bashikaogong-Shimierbulake granitic complex, north Altun, NW China:Geochemistry and zircon SHRIMP ages

The Bashikaogong-Shimierbulake granitoid complex is about 30 km long and 2―6 km wide, with an area of 140 km2, located at the north margin of the Bashikaogong Basin in the north Altun terrain. It intruded into schist, metapelite and metatuff of Precambrian ages. This granitoid complex consists of darkish quartz diorite, grey granite, pink granite and pegmatite. Geochemically, the quartz diorite has I-type granite affinity and belongs to Calc-alkaline sereies, and the other gran- ites have S-type affinity and to high-K calc-alkaline series. Zircon SHRIMP U-Pb dating shows that the quartz diorite has a bigger age than those of other granites, which is 481.6±5.6 Ma for quartz diorite, 437.0±3.0 Ma―433.1±3.4 Ma for grey granite and 443±11 Ma―434.6±1.6 Ma for pink granite, re- spectively. Combined with regional geology, we think that the quartz diorite formed in tectonic envi- ronment related to oceanic crust subduction and the granites in post-collision.     

Geochemical evidence for contribution of ore-forming materials from peraluminous granite basement —— Taking Fucheng pluton and No. 6722 uranium deposit in southern Jiangxi Province as examples

Source of ore-forming material is always one of the fundamental subjects in the study of mineral deposits. Recently, in order to probe deep sources of ore-forming materials, many interna-tional and Chinese investigators have paid much attention to the rel…     

A geophysical approach to the granite batholith under the eastern Southern Uplands,Scotland

From our interpretation of the Bouguer gravity and aeromagnetic anomalies in south-east Scotland, we conclude that a massive granite batholith underlies the greater part of the eastern Southern Uplands. The granite model which we computed earlier from gravity anomalies in the Tweeddale area fits the observed magnetic anomalies closely, if a normal magnetization of 0.095 A m^–1 is assigned, similar to values found for exposed local granites. Further gravity modelling shows that, apart from the Tweeddale boss, the granite shallows to less than 1 km near Lammer Law in East Lothian and extends north of the Lammermuir Fault. A model for the East Lothian volcanics was computed from their aeromagnetic anomalies, then their gravitational effect was combined with that estimated for the Devonian and Carboniferous sediments and the result stripped off the observed gravity field. The residual gravity anomalies were used to generate a two-dimensional model for the granite north of the Lammermuir Fault. The expected tectonic consequences of a massive granite batholith in the eastern Southern Uplands are compared with the known development of faults and sedimentary basins around its margins.     

内蒙古锡林浩特I型花岗岩的时代及构造意义

在内蒙古锡林浩特水库地区出露的花岗岩确定为I型花岗岩,具有较高的Cr、Co、Ni丰度。Ca、Al含量和N2O／K2O比值较高,Fe、Mg含量较低。微量元素蛛网图中显示出明显的Nb、Ta、P、Ti负异常。在SiO2-K2O及AFM图中,花岗质岩石投在钙碱性系列区;在构造环境判别图中,花岗质岩石样品都投在火山弧＋同碰撞花岗岩区。锆石测年结果显示平均年龄为317．0±4．0Ma,属晚石炭世。这套晚石炭世岛弧花岗岩的存在,表明加里东期古亚洲洋并未完全关闭,晚石炭世时仍然存在洋壳的俯冲消减事件。从区域上看,是北侧的贺根山洋盆向南俯冲的结果。     

广东南山花岗岩形成时代、地球化学特征与成因

广东南山花岗岩体位于陂头复式岩体西端,锆石的SHRIMP U-Pb年龄为158.1±1.8Ma,是燕山早期岩浆活动的产物。岩石化学特征显示岩体以高硅、富碱、贫Ca和Mg以及高TFeO/MgO、低CaO/Na2O为特征。其K2O/Na2O〉1,A/NK=7.8~11.92,A/CNK=1.33~1.68,属过铝质碱性岩石。在稀土和微量元素组成上,岩石富含稀土元素（除明显的负Eu异常,δEu=0.09~0.16）以及Zr、Y、Th、U、Nb等高场强元素,贫Ba、Sr、Ti等,高10000x Ga/Al（比值大于2.6）。在Zr、Nb、Ce、Y对10000×Ga/Al以及TFeO/MgO-SiO2等A型花岗岩多种判别图上,投影点主要落在A型花岗岩区,而与高分异的I、S型花岗岩明显不同。这些特征均指示,南山岩体具有铝质A型花岗岩的特点。通过Y-Nb-3Ga和Y-Nb-Ce构造环境判别图解将其进一步划分为A2型花岗岩,代表其形成于拉张的构造背景之下。本文在此研究基础上,认为南山花岗质岩浆可能形成于相对挤压的中侏罗世。而在晚侏罗世早期相对拉张的作用下,岩石圈减薄,软流圈地幔上涌,地壳的泥质岩和少量砂质岩受到幔源流体富集后发生部分熔融后上侵形成铝质A型花岗岩,且有较强的结晶分异作用。