三次参数样条曲线在等高线矢量化中的应用

主要阐述了如何应用参数样条曲线在AutoCAD中快速准确地矢量化等高线。通过对三次参数样条曲线不同边界条件所绘线形的分析,最终选定了用夹持端样条曲线来矢量化等高线,并在AutoCAD平台上和VC 6.0开发环境下,用Object ARX开发工具包开发完成该矢量化程序。实践证明,该法切实可行,提高了工作效率。     

房产测量中椭圆和样条曲线的多段线逼近

本文介绍了在AutoCAD环境中,对椭圆和样条曲线以面积为逼近指标调整偏移距离,用B样条函数处理偏移后样条曲线的控制数据,生成多段线逼近原椭圆或样条曲线的方法.解决了房产测量和建筑设计中将椭圆和椭圆弧精确地转化为多段线的问题.     

彩色扫描地图中背景色的等高(等深)线矢量化研究

在介绍矢量化方式的基础上,根据国外地图的特点,选择了基于全要素地图的矢量化方式。通过综合利用多义点及方向信息,对等高线矢量化的追踪过程控制,不仅避免了误追踪等特殊情况,且减少了人机交互,实现了有背景色区域等高(等深)线的半自动矢量化。     

利用航天数据制图在国外铁路项目中的应用

本文详细介绍了在国外铁路项目前期工作实践中,采用影像纠正、自动提取等高线、影像矢量化等技术,摸索出的一套新的制图方法.     

一种地形图快速扫描矢量化方法

提出了利用adobe的Steamline以及AutoCAD、CorelDraw对纸介图进行扫描矢量化的方法，该方法的主要功能是原图扫描、扫描图矢量化及矢量图校正的处理。经实践应用，其速度、精度等均可满足一般地理信息系统的要求。     

基于空间插值彩色扫描地形图等高线的自动矢量化

本文主要描述了一种基于彩色扫描地形图等高线的自动提取以及自动矢量化的方法,提出了通过空间插值解决等高线不连通问题的新方法。首先利用图像分割方法分色提取出栅格等高线,自动矢量化等高线(CLs1),然后对这些不连续的等高线赋值,结合其他地形要素(高程点、山脊线、山谷线等)创建DEM,从DEM中提取等高线(CLs2),最后利用提取出的等高线(CLs2)修正从地形图中自动矢量化得到的等高线(CLs1),得到连通的矢量化等高线。通过实验证明此方法是有效的,提高了等高线自动化程度。     

利用AutoCAD2000 VBA编程实现矿图符号的绘制

本文通过对AutoCAD2000VBA编程方法的剖析，探讨了利用AutoCAD2000VBA编程绘帛矿图符号的过程，为直接在AutoCAD2000图形环境下实现矿图的矢量化和辅助地质制图提供了一种技术方法。     

CASS、RDMS与MapGIS软件的地籍数据转换

CASS是南方公司在AutoCAD 2000平台下开发的测图软件，多用于工程测量。RDMS是武汉瑞得公司研制的测图软件，在地籍测量方面有独道之处。MapGIS是武汉中地信息工程有限公司开发的地理信息处理软件，常用于图件矢量化，地图、地质矿产图制作，土地利用数据库建设等。     

线性要素栅格数据矢量化快速简便算法设计与实现

基于追踪圆线性要素矢量化算法,总结该方法的特性与不足之处,在此基础上提出改进的追踪框线性要素矢量化算法,并在VS2005环境下采用C＋＋语言实现线性要素矢量化功能。实验证明：该算法具有算法简洁、速度快、内存占用少,容易编程实现等特点,且矢量化效果十分理想。     

AutoCAD图形环境下基于对象的扫描等高线图自动识别

介绍了基于对象的图形扫描矢量化所要解决的一些问题，并描述了AutoCAD图像处理的原理。设计并实现了基于对象的扫描等高线图自动识别系统。用实例说明了本文所讨论系统的功能和实用性。     

阿克苏河-塔里木河水系水质污染遥感监测与评价

 采用Landsat TM数据分析了阿克苏河—塔里木河断面水质污染状况,通过波段的DN值和常规监测数据建立能反映水质状况的 污染物监测模型。结果发现,将2000年常规监测数据代入模型后,与遥感数据的结果基本吻合| 重建阿克苏河—塔里木河的连续水体 污染变化曲线,得出污染物浓度随着远离上游而增加。     

Monitoring drought dynamics in the Aravalli region (India) using different indices based on ground and remote sensing data

The hard-rock hilly Aravalli terrain of Rajasthan province of India suffers with frequent drought due to poor and delayed monsoon, abnormally high summer-temperature and insufficient water resources. In the present study, detailed analysis of meteorological and hydrological data of the Aravalli region has been carried out for the years 1984–2003. Standardised Precipitation Index (SPI) has been used to quantify the precipitation deficit. Standardised Water-Level Index (SWI) has been developed to assess ground-water recharge-deficit. Vegetative drought indices like Vegetation Condition Index (VCI) and Temperature Condition Index (TCI) and Vegetation Health Index (VHI) have been computed using NDVI values obtained from Global Vegetation Index (GVI) and thermal channel data of NOAA AVHRR satellite. Detailed analyses of spatial and temporal drought dynamics during monsoon and non-monsoon seasons have been carried out through drought index maps generated in Geographic Information Systems (GIS) environment. Analysis and interpretation of these maps reveal that negative SPI anomalies not always correspond to drought. In the Aravalli region, aquifer-stress shifts its position time to time, and in certain pockets it is more frequent. In comparison to hydrological stress, vegetative stress in the Aravalli region is found to be slower to begin but quicker to withdraw.     

使用FME与VBA提取机场方格网高程数据

因受机场工程设计软件的测量数据容量限制,基于LiDAR采集、点云分类后得到的地面点云数据LAS不能完整应用于目前设计软件进行设计计算。本文通过对拟选技术方案的筛选,提出了利用FME Workbench数据处理功能,结合VBA编程获取外部方格网平面数据的方法。该方法在FME Workbench中实现了地面点云数据构建TIN、采用逐点内插方法从TIN中提取方格网高程数据、等高线生成及相应图形处理与成果输出。最终通过实际算例证明了该方法的有效性。     

Landslide risk analysis between Giri and Tons Rivers in Himachal Himalaya (India)

The area around Sataun in the Sirmur district of Himachal Pradesh, India (falling between the rivers Giri and Tons; both tributaries of the Yamuna River) was studied for landslide vulnerability on behalf of the inhabitants. The study was made using extensive remote sensing data (satellite and airborne). It is well supported by field evidence, demographic and infrastructural details and aided by Geographic Information System (GIS) based techniques. Field observations testify that slope, aspect, geology, tectonic planes, drainage, and land use all influence landslides in the region. These parameters were taken into consideration using the statistical approach of landslide hazard zonation. Using the census data of 1991, vulnerability of the populace to the landslide hazard was accessed. As most of the infrastructure in the region is concentrated around population centres, population data alone was used for vulnerability studies.     

Gravity Changes Before Large Earthquakes in China: 1998-2005

Although it is well known that coseismic gravity changes take place during an earthquake, previous research has not yielded convincing evidence demonstrating that significant gravity changes occur before large earthquakes. Furthermore, even if we suspect that gravity changes occur before large earthquakes, we have yet to demonstrate how to consistently observe these changes for useful earthquake forecast that would bring benefits to society. We analyzed ground gravity survey data obtained in 1998, 2000, 200...     

GNSS系统及其技术的发展研究

阐述了国际上卫星导航系统的总体发展,对美、俄、欧、中的四大全球系统,以及相关的区域系统和增强系统进行了简单的介绍,研究分析了GNSS系统及其技术的发展趋势,同时分析了我国Compass全球系统面临的机遇和挑战,并提出了我国未来工作的建议.     

自动车辆定位导航系统中传感器的误差分析

对国界定位导航系统中几种常见的辅助传感器所产生的误差进行了分析，导出了不同传感器的误差模型。这些误差模型是估计车辆位置的扩展卡尔曼滤波器的基础，同时也为选择适当的传感器提供了理论根据。     

“4D”技术及其应用

介绍“４Ｄ”（即数字地面模型、数字正射影像、数字栅格地图和数字线划地图）系列产品的生产流程、关键技术、及其在耕地保护、防灾减灾救灾和城市规划等方面的应用方法。     

Virtual Australia: its key elements – know,think, communicate

Abstract

Virtual Australia is not a well-defined or agreed concept. This discussion paper conceptualises Virtual Australia as a ‘virtual [digital] model containing and representing all non-trivial objects and their contextual environment – from blue sky to bedrock – in real world Australia’. It describes a scenario for Virtual Australia, one or two decades from now, in which the locations and conditions of non-trivial objects and their environment are updated automatically through a combination of remote sensing and wireless communication technologies in support of a ‘Supranet’. It then examines the concept of the ‘Supranet’ – a pervasive information network based largely on wireless technology linking the physical world to a virtual model in real time – and develops and discusses three principal characteristics of the Supranet: the ability to have or collect specific information (know); the ability to process information (think); and the ability to communicate that information. If, in the near future, any or all non-trivial devices are to some extent able to know, think and communicate, the potential for object autonomy will be realised.