From incipient island arc to doubly‐vergent orogen: A review of geodynamic models and sedimentary basin‐fills of southern Central America

Southern Central America is a Late Mesozoic/Cenozoic island arc that evolved in response to the subduction of the Farallón Plate beneath the Caribbean Plate in the Late Cretaceous and, from the Oligocene, the Cocos and Nazca Plates. Southern Central America is one of the best studied convergent margins in the world. The aim of this paper is to review the sedimentary and structural evolution of arc‐related sedimentary basins in southern Central America, and to show how the arc developed from a pre‐extensional intra‐oceanic island arc into a doubly‐vergent, subduction orogen. The Cenozoic sedimentary history of southern Central America is placed into the plate tectonic context of existing Caribbean Plate models. From regional basin analysis, the evolution of the southern Central American island arc is subdivided into three phases: (i) non‐extensional stage during the Campanian; (ii) extensional phase during the Maastrichtian‐Oligocene with rapid basin subsidence and deposition of arc‐related, clastic sediments; and (iii) doubly‐vergent, compressional arc phase along the 280 km long southern Costa Rican arc segment related to either oblique subduction of the Nazca plate, west‐to‐east passage of the Nazca–Cocos–Caribbean triple junction, or the subduction of rough oceanic crust of the Cocos Plate. The Pleistocene subduction of the Cocos Ridge contributed to the contraction but was not the primary driver. The architecture of the arc‐related sedimentary basin‐fills has been controlled by four factors: (i) subsidence caused by tectonic mechanisms, linked to the angle and morphology of the incoming plate, as shown by the fact that subduction of aseismic ridges and slab segments with rough crust were important drivers for subduction erosion, controlling the shape of forearc and trench‐slope basins, the lifespan of sedimentary basins, and the subsidence and uplift patterns; (ii) subsidence caused by slab rollback and resulting trench retreat; (iii) eustatic sea‐level changes; and (iv) sediment dispersal systems.     

Kinematic setting and structural control of arc volcanism

The evaluation of the kinematic setting and the structural control of volcanic arcs are important in defining the tectono-magmatic processes along convergent plate boundaries. However, our knowledge is fragmented and the available data highlight different behaviours. This study analyzes the kinematic setting, the structural control and the volcanic productivity of 16 arcs. These arcs are characterized by predominant extensional, compressional, strike–slip or oblique motions. There is an overall coupling between the normal vs. parallel motions along the arc and those of the underlying slab. Therefore, the higher the trench-normal (or parallel) component of the subduction rate, the higher is the amount of arc-normal (or parallel) motion. This relation confirms that strain partitioning is, in general, feasible at many convergent settings, involving also the volcanic arc portion. The arc-normal motion may be characterized by extension or compression, as a function of the increase in the trench-normal convergence (or subduction) velocity. The lack of an evident relation between the subduction rate (or convergence rate) and the volcanic productivity of the arc is partly inconsistent with previous studies, which highlight a relation between the subduction rate and melt production below arcs. This discrepancy mainly suggests that different processes control the generation, rise and eruption of magma at different depths, varying the intrusive/extrusive ratio along arcs. The structure of the arc does not control the distribution of the volcanoes; however, it does control the volcanic output through different processes, even though regional or local extension (associated with strike–slip or compressive structures) is the ultimate requisite, in any setting. In general, the higher the amount of extension, the higher is the output rate along the arc.     

Shallow seismicity, stress distribution and crustal deformation pattern in the Andaman-West Sunda arc and Andaman Sea, northeastern Indian Ocean

Shallow seismicity and available source mechanisms in the Andaman–westSunda arc and Andaman sea region suggest distinct variation in stressdistribution pattern both along and across the arc in the overriding plate.Seismotectonic regionalisation indicates that the region could be dividedinto eight broad seismogenic sources of relatively homogeneousdeformation. Crustal deformation rates have been determined for each oneof these sources based on the summation of moment tensors. The analysisshowed that the entire fore arc region is dominated by compressive stresseswith compression in a mean direction of N23^°, and the rates ofseismic deformation velocities in this belt decrease northward from 5.2± 0.65 mm/yr near Nias island off Sumatra and 1.12 ±0.13 mm/yr near Great Nicobar islands to as much as 0.4 ±0.04 mm/yr north of 8^°N along Andaman–Nicobar islandsregion. The deformation velocities indicate, extension of 0.83 ±0.05 mm/yr along N343^° and compression of 0.19 ±0.01 mm/yr along N73^° in the Andaman back arc spreadingregion, extension of 0.18 ± 0.01 mm/yr along N125^° andcompression of 0.16 ± 0.01 mm/yr along N35^° in NicobarDeep and west Andaman fault zone, compression of 0.84 ±0.12 mm/yr N341^° and extension of 0.77 ± 0.11 mm/yralong N72^° within the transverse tectonic zone in the Andamantrench, N-S compression of 3.19 ± 0.29 mm/yr and an E-Wextension of 1.24 ± 0.11 mm/yr in the Semangko fault zone ofnorth Sumatra. The vertical deformation suggests crustal thinning in theAndaman sea and crustal thickening in the fore arc and Semangko faultzones. The apparent stresses calculated for all major events range between0.1–10 bars and the values increase with increasing seismic moment.However, the apparent stress estimates neither indicate any significantvariation with faulting type nor display any variation across the arc, incontrast to the general observation that the fore arc thrust events showhigher stress levels in the shallow subduction zones. It is inferred that theoblique plate convergence, partial subduction of 90^°E Ridge innorth below the Andaman trench and the active back arc spreading are themain contributing factors for the observed stress field within the overridingplate in this region.     

Two-Dimensional Geothermal Modelling Along the Central Pontides Magmatic Arc: Implications for the Geodynamic Evolution of Northern Turkey

The Pontides, which can be divided tectonically into three main segments as Eastern, Central, and Western Pontides, is one of the most complex geodynamic settings within the Alpine belt. The Central Pontides, where the Eastern and Western Pontides met and formed a tectonic knot, represent an amalgamated tectonic mosaic consisting of remnants of oceanic, continental, and island arc segments. Subduction polarity, which is responsible for the formation of the Pontides, is still under debate because of limited geological, geophysical, and geochemical data. Two-dimensional (2-D) thermal modelling studies along the Central Pontides magmatic arc (Northern Turkey), Sakarya and Kırşehir continents are investigated in order to delineate the crustal thermal structure and subduction polarity. The obtained numerical results indicate that arc and back-arc regions are hot because of the cooling effects of a subducting plate. Moho temperatures in the investigated region are found between 992°C in the south (back-arc) and 415°C in the north (arc). Moreover, mantle heat flow values vary from 57.2 mWm⁻² in the south (back-arc) to 34.7 mWm⁻² in the north (arc). It is shown from this study that the Eurasia plate had moved from north to south under the Anatolia plate along the south Black Sea coast.     

Evolution of the Bayramiç magmatic complex, northwestern Anatolia

During the Oligocene–Middle Miocene period widespread magmatic activity developed in Western Anatolia, following the continental collision between the Sakarya continent and the Tauride–Anatolide platform. This produced both intrusive and extrusive rocks, which appear to be associated in space and time, as exemplified from the Bayramiç area. In the Bayramiç area, the magmatic activity started with the intrusion of the Evciler granite, and the coeval lower volcanic association. This was followed by the development of the upper volcanic association. These rock groups form collectively the Bayramiç magmatic complex, which was generated under an on-going north–south compressional regime. The Bayramiç magmatic complex has a subalkaline composition, displaying a calcalkaline trend. Trace elements and REE contents resemble to island-arc and collision-related magmas. According to the isotope values the Bayramiç magmatic complex was derived from the magmas of lithospheric mantle origin, which were later contaminated, while passing through the thick continental crust, in a post-collisional tectonic setting, during the Oligocene–Early Miocene period. The latest product of the magmatism is the Late Miocene–Pliocene basalt lavas. Their geochemical properties are clearly different from the Oligocene–Early Miocene magmatic rocks. The basalts were generated when the north–south compression gave way to the north–south extensional regime.     

Pertrogenesis and tectonic implications of the late Jurassic basic rocks from the northern Shi‐Hang zone,Southeast China

The tectonic setting of the late mesozoic of South China is in a debate between two schools of thought: an intra‐continental rift zone along a passive continental margin or active rifting associated with subduction of the paleo‐Pacific Plate. In this study, we present new sensitive high‐resolution ion microprobe (SHRIMP) U‐Pb zircon ages, along with geochemical data of three basic dikes that cross‐cut the Dexing porphyry copper deposit. The deposit is the largest of its kind in eastern China and part of large scale mineralization associated with Mesozoic magmatic activity in the area. Our results indicate that the dikes were emplaced in the Late Jurassic with an average U‐Pb age of 153.5 ± 2.4 Ma. The intrusions have bulk ε_Nd(t) of ca +0.7 and zircon ε_Hf(t) value of +1.54 to +6.92. Based on relatively enriched light rare earth elements (LREE) and depleted high‐field‐strength elements (HFSE) abundances with pronounced negative Ta–Nb, Hf–Zr and Ti anomalies in multi‐element diagrams, we propose that these dikes were derived from a subduction‐modified lithospheric mantle source. The variability in Hf isotopes identifies some degree of crustal contaminations. Our data support a scenario with a back‐arc extensional setting or an intra‐arc rift environment associated with the westward subduction of the paleo‐Pacific Plate at or prior to the late Jurassic as the most likely cause for these subduction signatures.     

The subduction of the Paleo‐Pacific Plate to the Jiamusi Block: Evidence from the Early Mesozoic sedimentary rocks of the eastern Jiamusi Block

In order to provide references of the subduction process of the Paleo‐Pacific Plate beneath the Jiamusi Block, this paper studied the clastic rocks of the Nanshuangyashan Formation using modal analysis of sandstones, mudstone elements geochemistry, and detrital zircon U–Pb dating. These results suggest the maximum depositional age of the Nanshuangyashan Formation was between the Norian and Rhaetian (206.8 ±4.6 Ma, mean standard weighted deviation (MSWD) = 0.17). Whole‐rock geochemistry of mudstone indicates that source rocks of the Nanshuangyashan Formation were primarily felsic igneous rocks and quartzose sedimentary rocks, which were mainly derived from the stable continental block and a magmatic arc. Detrital zircon analysis showed the Nanshuangyashan Formation samples recorded four main age groups: 229–204 Ma, 284–254 Ma, 524–489 Ma and 930–885 Ma, and the provenances were attributed to the Jiamusi Block and a Late Triassic magmatic arc near the study area. Furthermore, the eastern Jiamusi Block was a backarc basin, affected by the subduction of the Paleo‐Pacific Plate in the Late Triassic, but the magmatic arc related to the subduction near the study area finally died out due to tectonic changes and stratigraphic erosion.     

Tectono-magmatic evolution of the 1.9-Ga great bear magmatic zone, Wopmay orogen, northwestern Canada

The 1875-1840-Ma Great Bear magmatic zone is a 100-km wide by at least 900-km-long belt of predominantly subgreenschist facies volcanic and plutonic rocks that unconformably overlie and intrude an older sialic basement complex. The basement complex comprises older arc and back-arc rocks metamorphosed and deformed during the Calderian orogeny, 5–15 Ma before the onset of Great Bear magmatism. The Great Bear magmatic zone contains the products of two magmatic episodes, separated temporally by an oblique folding event caused by dextral transpression of the zone: (1) a 1875-1860-Ma pre-folding suite of mainly calc-alkaline rocks ranging continuously in composition from basalt to rhyolite, cut by allied biotite-hornblende-bearing epizonal plutons; and (2) a 1.85-1.84-Ga post-folding suite of discordant, epizonal, biotite syenogranitic plutons, associated dikes, and hornblende-diorites, quartz diorites, and monzodiorites. The pre-folding suite of volcanic and plutonic rocks is interpreted as a continental magmatic arc generated by eastward subduction of oceanic lithosphere. Cessation of arc magmatism and subsequent dextral transpression may have resulted from ridge subduction and resultant change in relative plate motion. Increased heat flux due to ridge subduction coupled with crustal thickening during transpression may have caused crustal melting as evidenced by the late syenogranite suite. Final closure of the western ocean by collision with a substantial continental fragment, now forming the neoautochthonous basement of the northern Canadian Cordillera, is manifested by a major swarm of transcurrent faults found throughout the Great Bear zone and the Wopmay orogen.Although there is probably no single evolutionary template for magmatism at convergent plate margins, the main Andean phase of magmatism, exemplified by the pre-folding Great Bear magmatic suite, evolves as larger quantities of subduction-related mafic magma rise into and heat the crust. This results in magmas that are more homogeneous, siliceous, and explosive with time, ultimately leading to overturn and fractionation of the continental crust.     

Alpine tectonic evolution of a Jurassic subduction-accretionary complex: Deformation,kinematics and Ar/Ar age constraints on the Mesozoic low-grade schists of the Circum-Rhodope Belt in the eastern Rhodope-Thrace region,Bulgaria-Greece

Deformation of the Circum-Rhodope Belt Mesozoic (Middle Triassic to earliest Lower Cretaceous) low-grade schists underneath an arc-related ophiolitic magmatic suite and associated sedimentary successions in the eastern Rhodope-Thrace region occurred as a two-episode tectonic process: (i) Late Jurassic deformation of arc to margin units resulting from the eastern Rhodope-Evros arc–Rhodope terrane continental margin collision and accretion to that margin, and (ii) Middle Eocene deformation related to the Tertiary crustal extension and final collision resulting in the closure of the Vardar ocean south of the Rhodope terrane. The first deformational event D₁ is expressed by Late Jurassic NW-N vergent fold generations and the main and subsidiary planar-linear structures. Although overprinting, these structural elements depict uniform bulk north-directed thrust kinematics and are geometrically compatible with the increments of progressive deformation that develops in same greenschist-facies metamorphic grade. It followed the Early-Middle Jurassic magmatic evolution of the eastern Rhodope-Evros arc established on the upper plate of the southward subducting Maliac-Meliata oceanic lithosphere that established the Vardar Ocean in a supra-subduction back-arc setting. This first event resulted in the thrust-related tectonic emplacement of the Mesozoic schists in a supra-crustal level onto the Rhodope continental margin. This Late Jurassic-Early Cretaceous tectonic event related to N-vergent Balkan orogeny is well-constrained by geochronological data and traced at a regional-scale within distinct units of the Carpatho-Balkan Belt. Following subduction reversal towards the north whereby the Vardar Ocean was subducted beneath the Rhodope margin by latest Cretaceous times, the low-grade schists aquired a new position in the upper plate, and hence, the Mesozoic schists are lacking the Cretaceous S-directed tectono-metamorphic episode whose effects are widespread in the underlying high-grade basement. The subduction of the remnant Vardar Ocean located behind the colliding arc since the middle Cretaceous was responsible for its ultimate closure, Early Tertiary collision with the Pelagonian block and extension in the region caused the extensional collapse related to the second deformational event D₂. This extensional episode was experienced passively by the Mesozoic schists located in the hanging wall of the extensional detachments in Eocene times. It resulted in NE-SW oriented open folds representing corrugation antiforms of the extensional detachment surfaces, brittle faulting and burial history beneath thick Eocene sediments as indicated by 42.1–39.7 Ma ⁴⁰Ar/³⁹Ar mica plateau ages obtained in the study. The results provide structural constraints for the involvement components of Jurassic paleo-subduction zone in a Late Jurassic arc-continental margin collisional history that contributed to accretion-related crustal growth of the Rhodope terrane.     

Developing plate tectonics theory from oceanic subduction zones to collisional orogens

Crustal subduction and continental collision is the core of plate tectonics theory. Understanding the formation and evolution of continental collision orogens is a key to develop the theory of plate tectonics. Different types of subduction zones have been categorized based on the nature of subducted crust. Two types of collisional orogens, i.e. arc-continent and continent-continent collisional orogens, have been recognized based on the nature of collisional blocks and the composition of derivative rocks. Arc-continent collisional orogens contain both ancient and juvenile crustal rocks, and reworking of those rocks at the post-collisional stage generates magmatic rocks with different geochemical compositions. If an orogen is built by collision between two relatively old continental blocks, post-collisional magmatic rocks are only derived from reworking of the old crustal rocks. Collisional orogens undergo reactivation and reworking at action of lithosphere extension, with inheritance not only in the tectonic regime but also in the geochemical compositions of reworked products(i.e., magmatic rocks). In order to unravel basic principles for the evolution of continental tectonics at the post-collisional stages, it is necessary to investigate the reworking of orogenic belts in the post-collisional regime, to recognize physicochemical differences in deep continental collision zones, and to understand petrogenetic links between the nature of subducted crust and post-collisional magmatic rocks. Afterwards we are in a position to build the systematics of continental tectonics and thus to develop the plate tectonics theory.     

Basalt and tonalite from the Amami Plateau, northern West Philippine Basin: New Early Cretaceous ages and geochemical results, and their petrologic and tectonic implications

Abstract Basalts and tonalites dredged from the Amami Plateau in the northern West Philippine Basin have the geochemical characteristics of intraoceanic island arc rocks: low ⁸⁷Sr/⁸⁶Sr (0.70297–0.70310), intermediate ¹⁴³Nd/¹⁴⁴Nd (0.51288–0.51292), moderate light rare earth element (LREE) enrichment (La/Yb = 4.1–6.6) and high La/Nb (1.4–4.3). The incremental heating of hornblende from tonalites yielded well‐defined plateaus and ⁴⁰Ar/³⁹Ar isochron ages of 115.8 ± 0.5 Ma and 117.0 ± 1.1 Ma, while plagioclase yielded disturbed Ar release patterns, with ages ranging from 70 to 112 Ma. Taken together, these results show that the Amami Plateau was formed by subduction‐related magmatism in the Early Cretaceous period, earlier than indicated by prior K/Ar results. The results support tectonic models in which the West Philippine Basin was opened within a complex of Jurassic–Paleocene island arc terranes, which are now scattered in the northern West Philippine Basin, the Philippine Islands and Halmahera. The Amami Plateau tonalites and basalts have higher Sr/Y and lower Y and ⁸⁷Sr/⁸⁶Sr compared with younger tonalitic rocks from the northern Kyushu–Palau Ridge and the Tanzawa complex, which were formed by the subduction of the Pacific Plate beneath the Philippine Sea Plate. Based on the geochemical characteristics of the basalts, the Early Cretaceous subduction zone that formed the Amami Plateau may have been the site of slab melting, which suggests that a younger and hotter plate was being subducted at that time. However, the Amami tonalites were probably formed from basaltic magma by fractional crystallization or by partial melting of basaltic arc crust, rather than by melting of the subducted slab.     

Tectonic accretion of a subducted intraoceanic remnant arc in Cretaceous Hokkaido, Japan, and implications for evolution of the Pacific northwest

Abstract   An accretionary complex, which contains fragments of a remnant island arc, was newly recognized in the Cretaceous accretionary terranes in Hokkaido, Japan. It consists of volcanics, volcanic conglomerate, intermediate to ultramafic intrusive rocks with island-arc affinity including boninitic rocks, accompanied by chert and deformed terrigenous turbidites. Compared with the results of modern oceanic surveys, the preserved sequence from island-arc volcanics to chert, via reworked volcanics, is indicative of intraoceanic remnant arc, because the sequence suggests an inactive arc isolated within a pelagic environment before its accretion. The age of a subducting oceanic crust can be discontinuous before and after a remnant-arc subduction, resulting in abrupt changes in accretion style and metamorphism, as seen in Cretaceous Hokkaido. Subduction of such an intraoceanic remnant arc suggests that the subducted oceanic plate in the Cretaceous was not an extensive oceanic plate like the Izanagi and/or Kula Plates as previously believed by many authors, but a marginal basin plate having an arc–back-arc system like the present-day Philippine Sea Plate.     

巴布亚新几内亚构造演化与找矿潜力

巴布亚新几内亚在大地构造位置上位于欧亚板块、印度-澳大利亚板块和太平洋板块的结合部位.本文介绍了自晚白垩世以来巴布亚新几内亚经历的复杂地质构造演化过程,不同板块间的汇聚、碰撞、俯冲和拆离、扩张等地质作用形成了以区内南部克拉通、中部褶皱带及北部岛弧带为特点的地质构造单元,在区内形成了具有活动大陆边缘特色的成矿系统,对寻找以斑岩型和浅成低温热液型铜金矿、红土型镍矿为主要成矿类型具有重要意义.     

Volcanoes of the southwestern extension of the active Mariana island arc: New swath-mapping and geochemical studies

Until recently it was thought that the volcanoes of the Mariana island arc of the western Pacific terminated at Tracey Seamount at ∼ 14°N immediately west of Guam. Sea floor mapping in 1995 shows a series of large volcanic seamounts stretching westward for nearly 300 km beyond that point. The morphology, spacing, and composition of those sampled are consistent with their having formed as a consequence of eruption of suprasubduction zone arc magmas. The relationships of the volcanoes to the tectonic processes of subduction of the Pacific plate beneath the southern portion of the Mariana convergent plate margin are becoming increasingly clear as new bathymetry and geochemical data are amassed. The volcanoes along this trend that lie closest to Guam are forming where the center of active extension in the back-arc basin intersects the line of arc volcanoes. They develop well-defined rifts that are parallel to rift structures along the extension center, whereas volcanoes of the spreading axis to the north are smaller than the frontal arc volcanoes and tend to form along lineaments. Compositions of lavas from these intersection volcanoes bear some similarities to back-arc basin basalt, but are on the whole well within the range of compositions for Mariana island arc lavas. The Pacific plate subducts nearly orthogonal to the strike of the trench along the southern part of the Mariana system and the distance to the arc line from the trench axis is only ∼ 150 km. Several deep fault-controlled canyons on the inner slope of the southern Mariana trench indicate an enhanced tectonic extension of this plate margin. The presence of these active arc volcanoes and the existence of the orthogonal normal faulting along the southern Mariana forearc supports a model of radial extension for formation of the Mariana Trough, a model previously dismissed because of the lack of evidence of these two major geological features.     

Active deformation in the Vrancea region,Rumania

Recent and historical seismicity as well as reliable fault plane solutions are used to study the active deformation caused by the occurrence of intermediate depth (60–170 km) earthquakes of the Vrancea region, Rumania. In this area, located in the southeastern part of the Carpathian arc, the westward subduction of the Carpathian trench has terminated, leaving continental lithosphere, at present, at the arc. The principalT axis of the intermediate depth events trends N159°E and has a plunge of 74°, which is the same as the dip of the subducted plate. TheP axis has a trend of 314° and a shallow plunge of 15°. The analysis of the moment tensor of six focal mechanisms showed that the dominant mode of deformation of the subducted lithosphere is a down-dip extension at a rate of about 2 cm/yr, based on seismicity data.     

The geology, petrology, and petrogenesis of Saba Island, Lesser Antilles

Saba is the northernmost volcano along the Lesser Antilles island-arc chain. The Lesser Antilles arc results from the west-northwest subduction of the Atlantic lithosphere beneath the Caribbean Plate. Sediment thickness along the trench decreases northward away from sediment sources on the continent of South America. We focused our attention on Saba precisely because it is the furthest away from documented geochemical effects in the southern arc volcanics of the large sediment thicknesses — normally attributed to both source or upper level contamination (i.e. assimilation).Field mapping, petrology, mineralogy, K–Ar dating, and geochemical analyses (major and trace element) indicate a complex history of magma petrogenesis including crystal fractionation, magma mixing, and, surprisingly, crustal assimilation. This is the first time assimilation has been documented in the northern section of the Lesser Antilles arc. Magma mixing shows up in the field as banded pumice and petrographically and mineralogically as complex zoning in phenocrysts (such as reverse zoning in plagioclase), disequilibrium mineral assemblages (e.g. quartz and olivine), and disequilibrium between minerals and whole-rock compositions (e.g. forsterite content of olivine). Mass-balance modeling of major and trace elements support our contention that crystal fractionation (including amphibole) played an important role in magma evolution. However, various geochemical trends can only be explained by assimilation-fractional crystallization based on the fact that the trends of various trace elements and trace-element ratios vary with increasing silica. Finally, we could find no evidence of sediment source contamination in the most mafic rocks. It may exist but is overprinted by the later assimilation effects.     

Initiation of subduction by post-collision foreland thrusting and back-thrusting

While postulated causes of initial subduction and trench formation include underthrusting, controls on its location and age have not been determined. Consideration of the age of subduction zones bordering five collisional orogens suggests that subduction may have been initiated by foreland thrusts and back-thrusts. Foreland thrusts develop within a continental foreland on the subducting plate mostly within 50 my of collision with an arc system; where the foreland is narrow the thrusts may intersect the continent-ocean crust boundary. Back-thrusts develop in the fore-arc or back-arc area on the overriding plate within 10 to 20 my of collision, and can result in tectonic burial of the magmatic arc; where the arc system is oceanic the back-thrusts may intersect the arc-ocean crust boundary. Possible examples of subduction initiated by foreland thrusts are the start of subduction in the late Jurassic beneath the northern Sunda Arc, and at the end-Miocene in the Negros Trench. Examples of back-thrusts which have initiated or may initiate subduction are the late Cenozoic eastward translation of Taiwan over the Philippine Sea plate, the incipient southward subduction of the Banda Sea beneath Timor, and the W-dipping back-thrust comprising the Highland Boundary Fault zone and postulated early Ordovician thrusts to the SE in Scotland. The suggested relationship of subduction to collision helps to explain the persistence of Wilson cycles in the still-active late Mesozoic to Cenozoic orogenic belts and implies that orogeny will cease only with collision between major continents.     

Eruption characteristics and cycles at Pavlof Volcano, Alaska, and their relation to regional earthquake activity

Pavlof Volcano (55° 25′N, 161° 54′W) exhibits two eruption styles: magmatic eruptions of one-to-two-days duration, and phreatic-phreatomagmatic activity lasting several days to two months. Thirty-four eruptions have occurred in historic times; of these the largest are Volcano Explosivity Index=3. Nine magmatic and 13 phreatomagmatic eruptions occurred between 1973–1983. All the magmatic eruptions occurred in the fall, between Sept. 9–Nov. 20. Four magmatic eruptions occurred during November 11–15, but in four different years. A 3-year-long period of eruptive activity between 1973–1976 bears striking resemblance to a period of activity between 1980–1983. No locatable shallow earthquakes (<50 km) have occurred within 30 km of Pavlof since 1973, which is quite unusual for an active island-arc volcano. Shallow events in the adjacent are segments have focal mechanisms with P-axes perpendicular to the arc (and parallel to plate convergence). Deep earthquakes (> 100 km) are clustered beneath Pavlof and several other volcanoes. Their T-axes show downdip tension within the slab. Deep teleseisms (> 160 km) mostly occurred between 1977–1979 when the volcano was not erupting. Catalogued volcanic activity throughout the Alaska/Aleutian arc shows a weak tendency to increase around the time of great (M > 7.8) earthquakes.     

Formation of the Permian basalts and implications of geochemical tracing for paleo-tectonic setting and regional tectonic background in the Turpan-Hami and Santanghu basins,Xinjiang

The Turpan-Hami basin (as the Tu-Ha basin here-after) and the Santanghu basin, as the late Paleozoic– Mesozoic-Cenozoic reworked and superimposed sedi-mentary basins with the similar evolution history 1, 2), are located in between the Tianshan and the Altay moun-tains in northeastern Xinjiang. As the major oil-and gas-bearing basins in Xinjiang, study of both the ba-sins through their complicated tectonic evolution his-tory is scientifically significant for exploring conti-nental geology …     

Symmetrical and segmented variation of physical and geochemical characteristics of the central american volcanic front

The regional variation of physical and geochemical characteristics of Central American volcanoes occurs in two fundamentally different patterns. The first pattern is symmetrical about Nicaragua. Crustal thickness, silica contents of mafic lavas and volcanic edifice heights are lowest in Nicaragua and increase smoothly toward Costa Rica to the south and Guatemala to the north. Magma density is maximum in Nicaragua and decreases smoothly outward. The regional variation in crustal thickness is just enough so that magma densities, calculated at appropriate Moho pressures, are the same at the base of the crust throughout the region. This is consistent with magma ponding at the base of the crust. The bulk compositions of Central American basalts show the same symmetrical variation. Suites of Nicaraguan basalts plotted in pseudo-ternary CMAS projections indicate large olivine and plagioclase primary-phase volumes. Toward Costa Rica and Guatemala the olivine and plagioclase fields inferred from suites of basaltic lavas are smaller, which is consistent with fractionation at increasing depth.The second pattern is the segmentation of the volcanic front and the plate margin in general. The segmentation strongly affects the spacing and size of volcanic centers. At segment boundaries volcanic centers are generally small and unusually widely spaced. Toward segment interiors volcano spacing and size increase systematically. The LIL element contents of lavas strongly reflect this pattern. For lavas with similar silica contents the larger the volcano, the higher the LIL element contents. The relationships between segmentation, volcano spacing and volcano size are compatible with diapiric rise of magma accumulated in narrow ribbons near the upper surface of the underthrust slab. The relationship between volcano volume and LIL element content is qualitatively in agreement with an open-system fractionation model.