Exceedance probability for wave overtopping on a fixed deck

Detailed laboratory measurements were made of the instantaneous free surface elevation in front of a fixed deck and the instantaneous free surface elevation, velocity, and overtopping rate at the leading edge of the deck. The study showed that the exceedance probabilities for the normalized maximum instantaneous overtopping rate and the normalized overtopping volume were predicted by a simple exponential curve. The measured exceedance probability seaward of the deck compared well with the nonlinear theory of Kriebel and Dawson (Kriebel D.L., Dawson T.H., 1993. Nonlinearity in wave crest statistics. In: Proceedings Ocean Wave Measurement and Analysis. American Society of Civil Engineers, pp. 61–75). Conditional sampling of the crest heights seaward of the deck gave a normalized probability distribution similar to that of the maximum water level measured on the deck for each overtopping event. However, the values used to normalize each distribution were not the same.     

Laboratory observations of green water overtopping a fixed deck

A small-scale laboratory experiment was conducted to quantify a transient wave overtopping a horizontal, deck fixed above the free surface. Detailed free surface and velocity measurements were made for two cases with and without the deck structure to quantify the effect of the deck on the wave kinematics. The study showed that the structure increased the free surface above the leading edge of the deck by 20%. The velocity profile at the leading edge was fairly uniform, and the maximum horizontal velocity was similar to the maximum crest velocity measured without the deck. Immediately below the deck, the maximum velocity was 2.5 times greater than the corresponding velocity without the deck and 2.1 times greater than the maximum crest velocity without the deck. On the deck, the wave collapsed into a thin bore with velocities that exceeded 2.4 times the maximum crest velocity measured without the deck.     

Kinematics of extreme waves in deep water

The velocity profiles under crest of a total of 62 different steep wave events in deep water are measured in laboratory using particle image velocimetry. The waves take place in the leading unsteady part of a wave train, focusing wave fields and random wave series. Complementary fully nonlinear theoretical/numerical wave computations are performed. The experimental velocities have been put on a nondimensional form in the following way: from the wave record (at a fixed point) the (local) trough-to-trough period, T_TT and the maximal elevation above mean water level, η_m of an individual steep wave event are identified. The local wavenumber, k and an estimate of the wave slope, ε are evaluated from ω²/(gk)=1+ε², where ω=2π/T_TT and g denotes the acceleration of gravity. A reference fluid velocity, is then defined. Deep water waves with a fluid velocity up to 75% of the estimated wave speed are measured. The corresponding kη_m is 0.62. A strong collapse of the nondimensional experimental velocity profiles is found. This is also true with the fully nonlinear computations of transient waves. There is excellent agreement between the present measurements and previously published Laser Doppler Anemometry data. A surprising result, obtained by comparison, is that the nondimensional experimental velocities fit with the exponential profile, i.e. e^ky, y the vertical coordinate, with y=0 in the mean water level.     

A numerical model of wave overtopping on seadikes

This paper describes the development of a numerical model for wave overtopping on seadikes. The model is based on the flux-conservative form of the nonlinear shallow water equations (NLSW) solved with a high order total variation diminishing (TVD), Roe-type scheme. The goal is to reliably predict the hydrodynamics of wave overtopping on the dike crest and along the inner slope, necessary for the breach modelling of seadikes. Besides the mean overtopping rate, the capability of simulating individual overtopping events is also required. It is shown theoretically that the effect of wave breaking through the drastic motion of surface rollers in the surfzone is not sufficiently described by the conventional nonlinear shallow water equations, neglecting wave setup from the mean water level and thus markedly reducing the model predictive capacity for wave overtopping. This is significantly improved by including an additional source term associated with the roller energy dissipation in the depth-averaged momentum equation. The developed model has been validated against four existing laboratory datasets of wave overtopping on dikes. The first two sets are to validate the roller term performance in improving the model prediction of wave overtopping of breaking waves. The last two sets are to test the model performance under more complex but realistic hydraulic and slope geometric conditions. The results confirm the merit of the supplemented roller term and also demonstrate that the model is robust and reliable for the prediction of wave overtopping on seadikes.     

Analysis of the extreme wave elevation due to second-order diffraction around a vertical cylinder

Statistical analysis of nonlinear random waves is important in coastal and ocean engineering. One approach for modeling nonlinear waves is second-order random wave theory, which involves sum- and difference-frequency interactions between wave components. The probability distribution of the non-Gaussian surface elevation can be solved using a technique developed by Kac and Siegert [21]. The wave field can be significantly modified by wave diffraction due to a structure, and the nonlinear diffracted wave elevation can be of interest in certain applications, such as the airgap prediction for an offshore structure. This paper investigates the wave statistics due to second-order diffraction, motivated by the scarcity of prior research. The crossing rate approach is used to evaluate the extreme wave elevation over a specified duration. The application is a bottom-supported cylindrical structure, for which semi-analytical solutions for the second-order transfer functions are available. A new efficient statistical method is developed to allow the distribution of the diffracted wave elevation to be obtained exactly, accounting for the statistical dependency between the linear, sum-frequency and difference-frequency components. Moreover, refinements are proposed to improve the efficiency for computing the free surface integral. The case study yields insights into the problem. In particular, the second-order nonlinearity is found to significantly amplify the extreme wave elevation, especially in the upstream region; conversely, the extreme elevation at an oblique location downstream is attenuated due to sheltering effects. The statistical dependency between the linear and sum-frequency components is also shown to be important for the extreme wave statistics.     

Design weight of armour stone considering the effect of extreme waves

In this study, waves with the heights higher than H_1/3 in an irregular wave train are called as extreme waves and defined with the help of extreme wave parameter, α_extreme. In order to see the effect of extreme waves on the design weight of armour stone, stability analysis is carried out based on the hydraulic model test results. The test results of high α_extreme cases (HE) and low α_extreme cases (LE) are compared with currently used van der Meer's formulae with permeability factor P=0.4 and 0.45 and Hudson formula by using H_1/3 and H_1/10 in terms of the design weight of armour stone. As a result of the comparison, it is found that Hudson formula by using H_1/3 underestimates the necessary armour weight. Usage of H_1/10 instead of H_1/3 in Hudson formula doubles the weight which seems overestimated when Irribaren number is away from the transition zone in which both wave run-up and run-down forces become effective. However, it seems underestimated near the transition zone where experiment case HE gives higher armour weights. When the design weight of armour stone is calculated by van der Meer's formulae with P=0.4, it may be necessary to increase the weight up to 30% in the case of high extreme waves. On the other hand, van der Meer's formulae may overestimate the weight 14% when the extreme waves are low.     

Effect of a submerged plate on the near-bed dynamics underincoming waves in deep water conditions

It is well known that wave induced bottom oscillations become more and more negligible when the water depth exceeds half the wavelength of the surface gravity wave. However, it was experimentally demonstrated for regular waves that the bottom pressure oscillations at both first and second wave harmonic frequencies could be significant even for incoming waves propagating in deep water condition in the presence of a submerged plate [16]. For a water depth h of about the wavelength of the wave, measurements under the plate (depth immersion of top of plate h/6, length h/2) have shown bottom pressure variations at the wave frequency, up to thirty times larger than the pressure expected in the absence of the plate. In this paper, not only regular but also irregular wave are studied together with wave following current conditions. This behavior is numerically verified by use of a classical linear theory of waves. The wave bottom effect is explained through the role of evanescent modes and horizontally oscillating water column under the plate which still exist whatever the water depth. Such a model, which allows the calculation of the velocity fields, has shown that not only the bottom pressure but also the near bed fluid velocity are enhanced. Two maxima are observed on both sides of the location of the plate, at a distance of the plate increasing with the water depth. The possible impact of such near bed dynamics is then discussed for field conditions thanks to a scaling based on a Froude similarity. It is demonstrated that these structures may have a significant impact at the sea bed even in very deep water conditions, possibly enhanced in the presence of current.     

Forces and moment on a horizontal plate due to regular and irregular waves in the presence of current

This work presents an experimental study of a submerged plate used as a breakwater for coastal areas protection. Questions addressed concern the influence of current on the reflective power of the plate, and its influence on the hydrodynamic loads exerted on it. Results concern both monochromatic and irregular waves. Generally speaking, an influence of the current is found, changing the reflecting power of the structure up to 50%. A homogenized behavior of the loads and moments is found in the presence of currents, meaning that the load values become less sensitive to the frequency. Furthermore, the influence of waves reflected by the wave absorber, representing partially reflective conditions at the shore, is found to be of same order in the absence of current. In any case, the linear behavior of the breakwater is emphasized through the irregular waves approach.