共查询到20条相似文献,搜索用时 93 毫秒
1.
本文主要介绍了崇启长江大桥主桥钢连续梁大节段整体安装的施工测量控制对水上大跨度构件安装施工中起重船舶定位及移动、吊装过程中的安全监控、精调位控制作了较详细的阐述;并对现场安装误差的消除及控制误差不累积作了叙述,为以后水上进行大型构件安装施工定位提供了可借鉴的技术方法。 相似文献
2.
现代大型构件在多数情况下,是由分部件组合拼装而成,为了确保大型构件的安全运行,在其拼接过程中需要对其平面度和直线度等关键状态量进行测量,比较基于一维、三维和六自由度测量的3种测量模型.结果表明,对于拼接完成的大型构件的监测,3种测量模型都可以获得很好的监测效果;对于正在动态拼接的大型构件,前两种测量模型无法快速得到状态... 相似文献
3.
反应堆穹顶吊装施工测量方法的探讨 总被引:1,自引:0,他引:1
反应堆是核电站的关键部位,穹顶既是反应堆的安全壳,又是各种构件和设备的悬挂点或安装处.穹顶体积大、重量大、吊装高差大,安装精度要求高.从实际出发,对反应堆穹顶拼装场地和重型吊车基础定位、穹顶各层标高与半径测定、穹顶内部构件的定位和安装测量进行探讨,提出切实可行的测量方法. 相似文献
4.
一、引言
随着国民经济的快速发展,核能越来越受到各国能源部门的重视,最近中国通过了AP1000项目的规划,新的一轮核电站建设的高潮已经到来。核反应堆是核电站建设的核心,链式裂变反应就在其中进行的。而核反应堆施工测量的一个主要问题就是堆内各构件安装的精密对中。本文就堆内构件安装精密对中测量作一探讨。 相似文献
5.
6.
在机械制造中,精密测量技术是所生产制造产品能够满足设计要求的保障,也是对所生产制造产品进行质量检查和控制的基本技术。对于大型机械产品和设备,精密测量技术是实现产品和设备正确安装,使大型机械产品和设备正常运行的必要技术。本文总结了在机械制造中所使用的在线测量技术和离线测量技术以及测量技术在大型机械安装中的应用。 相似文献
7.
对大型会展中心钢结构安装施工测量的经验进行总结,在实际工作中根据现场条件、钢结构安装特点、难点等,采用多种常规测量手段,并结合有效的土办法,完成了钢结构安装施工测量.结果表明:施工测量精度良好,达到了预期的效果,取得了良好的经济效益. 相似文献
8.
吴栋材 《武汉大学学报(信息科学版)》1995,(4)
结合现代大型斜拉桥的施工测量实践,阐述了斜拉桥的大型构件──缆索管精密定位的原理和方法,分析了缆索管的定位精度与质量,指出了为保证缆索管的定位质量,设计和施工中值得改进的问题。 相似文献
9.
10.
11.
针对Grafarend的四类设计,提出了网的同步设计,论证了异步设计的相互关系,并从最优性及解集论证了同步设计和异步设计的最优性问题.得到整体最优和局部最优。最后以一算例表明结果的合理性。 相似文献
12.
A. A. Seemkooei 《Journal of Geodesy》2001,75(4):227-233
The proper and optimal design and subsequent assessment of geodetic networks is an integral part of most surveying engineering
projects. Optimization and design are carried out before the measurements are actually made. A geodetic network is designed
and optimized in terms of high reliability and the results are compared with those obtained by the robustness analysis technique.
The purpose of an optimal design is to solve for both the network configuration (first-order design) and observations accuracy
(second-order design) in order to meet the desired criteria. For this purpose, an analytical method is presented for performing
the first-order design, second-order design, and/or the combined design. In order to evaluate the geometrical strength of
a geodetic network, the results of robustness analysis are displayed in terms of robustness in rotation, robustness in shear,
and robustness in scale. Results showed that the robustness parameters were affected by redundancy numbers. The largest robustness
parameters were due to the observations with minimum redundancy numbers.
Received: 14 August 2000 / Accepted: 2 January 2001 相似文献
13.
14.
15.
何春秀 《测绘与空间地理信息》2021,44(1):207-209
随着互联网信息技术的飞速发展,电子化地图得到了广泛应用,高德地图、百度地图等互联网地图广泛应用于我们日常生活中,地图的美观性和设计感就决定了人们对它的第一印象。专题图作为一种集设计理念、空间信息于一体的地图产品,在很多场合中发挥着越来越大的作用。在制作专题地图中常常使用到的软件工具有ArcMap、CorelDRAW、Adobe Illustrator等,本文基于ArcMap进行专题图地图符号的设计,利用ArcMap专业地理信息的特性和强大的符号管理工具,对地图符号设计进行深入研究探索,发掘ArcMap对专题地图符号设计的潜力。 相似文献
16.
17.
18.
本文针对最小均方误差系统在理论和设计方法上存在的问题,推导出按无纹波条件下最小均方误差系统更完善的设计公式以及应用计算机的快速设计方法。 相似文献
19.
基于MapX的热力管网系统的设计与实现 总被引:4,自引:1,他引:3
介绍了基于MapX的GIS应用专题系统--热力管网信息系统的设计与实现,阐述了系统的技术设计、功能设计,实现了热力管网信息的科学化管理. 相似文献
20.
Zhilin Li 《制图学和地理信息科学》2013,40(4):348-362
Legends are important for understanding maps. Legend design is a part of map design and forms an important topic of cartographic research. Most research on legend design concentrates on the development of techniques rather than the development of basic principles. This study is devoted to the latter topic. Particularly, attention is paid to the development of spacing and alignment rules for effective design of legends shown on screens (computer monitors and tablet screens). Based upon Gestalt laws and Bumstead’s rules, a set of spacing and alignment rules is developed. Experimental evaluations are conducted, and the results indicate that a legend designed with proper consideration of the spacing and alignment rules is much more effective and efficient than ordinary legends. 相似文献