Trace metal levels in coastal sea water investigation of Danish waters

The concentration levels of Cd (25 ng l^?1), Cu (0.45 μg l^?1), Ni (0.48 μg l^?1), Fe (0.2–7.0 μg l^?1), Pb (40 ng l^?1) and Zn (0.80 μg l^?1) have been determined in the Danish Sounds and in the Kattegat. Different sampling techniques have been used and analyses have been carried out separately by two different investigators, both using freon-extraction followed by determination by atomic absorption spectrometry (a.a.s.). Except for iron, found mainly in the particulate phase, the metals are found predominantly in a dissolved and labile (extractable) form. The results are compared with trace metal levels found in the two main water masses entering the Kattegat—the North Sea and the Baltic Sea.     

Integration of magnetism and heavy metal chemistry of soils to quantify the environmental pollution in Kathmandu, Nepal

Abstract Soil profiles of the Kathmandu urban area exhibit significant variations in magnetic susceptibility (χ) and saturation isothermal remanence (SIRM), which can be used to discriminate environmental pollution. Magnetic susceptibility can be used to delineate soil intervals by depth into normal (< 10^?7 m³/kg), moderately enhanced (10^?7–< 10^?6 m³/kg) and highly enhanced (≥ 10^?6 m³/kg). Soils far from roads and industrial sites commonly fall into the ‘normal’ category. Close to a road corridor, soils at depths of several centimeters have the highest χ, which remains high within the upper 20 cm interval, and decreases with depth through ‘moderately magnetic’ to ‘normal’ at approximately 30–40 cm. Soils in the upper parts of profiles in urban recreational parks have moderate χ. Soil SIRM has three components of distinct median acquisition fields (B_1/2): soft (30–50 mT, magnetite‐like phase), intermediate (120–180 mT, probably maghemite or soft coercivity hematite) and hard (550–600 mT, hematite). Close to the daylight surface, SIRM is dominated by a soft component, implying that urban pollution results in enrichment by a magnetite‐like phase. Atomic absorption spectrometry of soils from several profiles for heavy metals reveals remarkable variability (ratio of maximum to minimum contents) of Cu (16.3), Zn (14.8) and Pb (9.3). At Rani Pokhari, several metals are well correlated with χ, as shown by a linear relationship between the logarithmic values. At Ratna Park, however, both χ and SIRM show significant positive correlation with Zn, Pb and Cu, but poor and even negative correlation with Fe (Mn), Cr, Ni and Co. Such differences result from a variety of geogenic, pedogenic, biogenic and man‐made factors, which vary in time and space. Nevertheless, for soil profiles affected by pollution (basically traffic‐related), χ exhibits a significant linear relationship with a pollution index based on the contents of some urban elements (Cu, Pb, Zn), and therefore it serves as an effective parameter for quantifying the urban pollution.     

40 年来江苏石梁河水库重金属污染的沉积记录

根据石梁河水库沉积物粒度和重金属元素(Cu,Cr,Zn,As和Pb)含量的分析,结合137Cs放射性比活度精确定年,研究了石梁河水库沉积速率和重金属的污染变化特征,并利用地累积指数法评价了重金属的污染程度.结果表明:石梁河水库 40年来平均淤积速率为3.85cm/a,Cu,Cr和zn地累积指数一直小于1,处于轻微污染;As污染水平变化较大.现处于低水平的轻度污染;Pb污染水平自柱底始持续恶化,目前地累积指数大于1,且有污染加剧趋势.     

Response of the paleomagnetic record to environmental changes in the late Pleistocene

During revisiting the Upper Pleistocene Pekla loess-soil section located on the Sea of Azov coast of the Taman Peninsula, its lower 6 m were continuously sampled, which led to an increase in the age range from ∼50 to 400 ka. The detailed rock magnetic study of the structure, grain-size, and concentrations of magnetic mineral (natural remanent magnetization (NRM) carrier) in the collected rock samples revealed regular changes in rock magnetic characteristics along the section and their correlation with climatic fluctuations. Magnetite and hematite both deposited during the transport of sedimentary material and formed during pedogenesis, which involved the entire section to a varying extent, represent the main magnetic minerals in the examined rocks. Automorphic paleosoils that were formed during warm and humid periods corresponding to odd stages of the MIS scale are characterized by elevated concentrations of magnetic mineral (NRM, magnetic susceptibility (K _lf), saturation isothermal remanent magnetization (SIRM), and anhysteresis (ideal) remanent magnetization (ARM)) parameters and share of superparamagnetic particles (up to 80%, according to elevated values of the frequency-dependent magnetic susceptibility K _td) as well as by lowered rigidity parameter (B _cr) and grain size (ARM/K parameter). Such changes in the paleosoils may be explained by the occurrence of newly formed fine-grained magnetite particles close in size to its superparamagnetic and single-domain varieties due to the activation of bio/geochemical processes during warm stages. The growth of the above-mentioned rock magnetic parameters in automorphic soils may be considered as serving a quantitative criterion for defining the boundary between warm and cold periods even in poorly developed soils.     

Movement and strain conditions of active blocks in the Chinese mainland

The definition of active block is given from the angles of crustal deformation and strain. The movement and strain parameters of active blocks are estimated according to the unified velocity field composed of the velocities at 1598 GPS stations obtained from GPS measurements carried out in the past years in the Chinese mainland and the surrounding areas. The movement and strain conditions of the blocks are analyzed. The active blocks in the Chinese mainland have a consistent E-trending movement component, but its N and S components are not consistent. The blocks in the western part have a consistent N-trending movement and the blocks in the eastern part have a consistent S-trending movement. In the area to the east of 90°E, that is the area from Himalayas block towards NE, the movement direction of the blocks rotates clockwisely and the movement rates of the blocks are different. Generally, the movement rate is large in the west and south and small in the east and north with a difference of 3 to 4 times between the rates in the west and east. The distributions of principal compressive strain directions of the blocks are also different. The principal strain of the blocks located to the west of 90oE is basically in the SN direction, the principal compressive strain of the blocks in the northeastern part of Qingzang plateau is roughly in the NE direction and the direction of principal compressive strain of the blocks in the southeastern part of Qingzang plateau rounds clockwisely the east end of Himalayas structure. In addition, the principal strain and shear strain rates of the blocks are also different. The Himalayas and Tianshan blocks have the largest principal compressive strain and the maximum shear strain rate. Then, Lhasa, Qiangtang, Southwest Yunnan (SW Yunnan), Qilian and Sichuan-Yunan (Chuan-Dian) blocks followed. The strain rate of the blocks in the eastern part is smaller. The estimation based on the stain condition indicates that Himalayas block is still the area with the most intensive tectonic activity and it shortens in the NS direction at the rate of 15.2±1.5 mm/a. Tianshan block ranks the second and it shortens in the NS direction at the rate of 10.1±0.9 mm/a. At present, the two blocks are still uprising. It can be seen from superficial strain that the Chinese mainland is predominated by superficial expansion. Almost the total area in the eastern part of the Chinese mainland is expanded, while in the western part, the superficial compression and expansion are alternatively distributed from the south to the north. In the Chinese mainland, most EW-trending or proximate EW-trending faults have the left-lateral or left-lateral strike-slip relative movements along both sides, and most NS-trending faults have the right-lateral or right-lateral strike-slip relative movements along both sides. According to the data from GPS measurements the left-lateral strike-slip rate is 4.8±1.3 mm/a in the central part of Altun fault and 9.8±2.2 mm/a on Xianshuihe fault. The movement of the fault along the block boundary has provided the condition for block movement, so the movements of the block and its boundary are consistent, but the movement levels of the blocks are different. The statistic results indicate that the relative movement between most blocks is quite significant, which proves that active blocks exist. Himalayas, Tianshan, Qiangtang and SW Yunnan blocks have the most intensive movement; China-Mongolia, China-Korea (China-Korea), Alxa and South China blocks are rather stable. The mutual action of India, Pacific and Philippine Sea plates versus Eurasia plate is the principal driving force to the block movement in the Chinese mainland. Under the NNE-trending intensive press from India plate, the crustal matter of Qingzang plateau moves to the NNE and NE directions, then is hindered by the blocks located in the northern, northeastern and eastern parts. The crustal matter moves towards the Indian Ocean by the southeastern part of the plateau.     

Movement and strain conditions of active blocks in the Chinese mainland

The definition of active block is given from the angles of crustal deformation and strain. The movement and strain parameters of active blocks are estimated according to the unified velocity field composed of the velocities at 1598 GPS stations obtained from GPS measurements carried out in the past years in the Chinese mainland and the surrounding areas. The movement and strain conditions of the blocks are analyzed. The active blocks in the Chinese mainland have a consistent E-trending movement component, but its N and S components are not consistent. The blocks in the western part have a consistent N-trending movement and the blocks in the eastern part have a consistent S-trending movement. In the area to the east of 90°E, that is the area from Himalayas block towards NE, the movement direction of the blocks rotates clockwisely and the movement rates of the blocks are different. Generally, the movement rate is large in the west and south and small in the east and north with a difference of 3 to 4 times between the rates in the west and east. The distributions of principal compressive strain directions of the blocks are also different. The principal strain of the blocks located to the west of 90°E is basically in the SN direction, the principal compressive strain of the blocks in the northeastern part of Qingzang plateau is roughly in the NE direction and the direction of principal compressive strain of the blocks in the southeastern part of Qingzang plateau rounds clockwisely the east end of Himalayas structure. In addition, the principal strain and shear strain rates of the blocks are also different. The Himalayas and Tianshan blocks have the largest principal compressive strain and the maximum shear strain rate. Then, Lhasa, Qiangtang, Southwest Yunnan (SW Yunnan), Qilian and Sichuan-Yunan (Chuan-Dian) blocks followed. The strain rate of the blocks in the eastern part is smaller. The estimation based on the stain condition indicates that Himalayas block is still the area with the most intensive tectonic activity and it shortens in the NS direction at the rate of 15.2 ± 1.5 mm/a. Tianshan block ranks the second and it shortens in the NS direction at the rate of 10.1 ± 0.9 mm/a. At present, the two blocks are still uprising. It can be seen from superficial strain that the Chinese mainland is predominated by superficial expansion. Almost the total area in the eastern part of the Chinese mainland is expanded, while in the western part, the superficial compression and expansion are alternatively distributed from the south to the north. In the Chinese mainland, most EW-trending or proximate EW-trending faults have the left-lateral or left-lateral strike-slip relative movements along both sides, and most NS-trending faults have the right-lateral or right-lateral strike-slip relative movements along both sides. According to the data from GPS measurements the left-lateral strike-slip rate is 4.8 ± 1.3 mm/a in the central part of Altun fault and 9.8 ± 2.2 mm/a on Xianshuihe fault. The movement of the fault along the block boundary has provided the condition for block movement, so the movements of the block and its boundary are consistent, but the movement levels of the blocks are different. The statistic results indicate that the relative movement between most blocks is quite significant, which proves that active blocks exist. Himalayas, Tianshan, Qiangtang and SW Yunnan blocks have the most intensive movement; China-Mongolia, China-Korea (China-Korea), Alxa and South China blocks are rather stable. The mutual action of India, Pacific and Philippine Sea plates versus Eurasia plate is the principal driving force to the block movement in the Chinese mainland. Under the NNE-trending intensive press from India plate, the crustal matter of Qingzang plateau moves to the NNE and NE directions, then is hindered by the blocks located in the northern, northeastern and eastern parts. The crustal matter moves towards the Indian Ocean by the southeastern part of the plateau.     

On the sensitivity of tidal residuals off the west coast of Britain to mesh resolution

An irregular mesh model of the west coast of Britain is used to examine the sensitivity of tidal residuals to mesh resolution in the region. Computed residuals are compared with earlier published results determined with a high resolution (1 km grid) finite difference model of the eastern Irish Sea. Initial calculations show that tidal residuals are largest in nearshore regions particularly in the vicinity of headlands. Local refinement of the mesh in these regions leads to a more detailed picture of the flow field, particularly adjacent to the coast. Although large scale offshore features of the flow can be resolved using the high resolution finite difference model, such an approach leads to a “stair case” representation of the coastal boundary with an adjacent near coastal region of spurious tidal residuals. By using an irregular mesh that follows the coast, this effect is removed. In the Mersey river region the tidal residual is resolved with a mesh resolution of 120 m, although calculations show that its distribution is particularly sensitive to small scale features of the topography. A variable mesh that can accurately represent the lateral variations in river width and details of topography in both the nearshore and estuarine environment appears essential in modelling the coastal spread of freshwater plumes from rivers and pollutants discharged into the near coastal environment.     

Decadal record of sediment export to the deep sea via Eel Canyon

An active upper-canyon system, Eel Canyon, was studied to determine its role as a conduit and/or sink for terrigenous material over decadal timescales and to assess the sedimentary record preserved by transport processes. These data are used to (1) link seasonal fluctuations in sediment transport and deposition to preserved stratigraphic signatures, and (2) assess sediment storage and removal in the upper Eel Canyon (100–850 m water depth) over decadal timescales. Previous research has shown that upper thalwegs commonly experience gravity-driven flows during winter (November–March), due to increased sediment supply from Eel River flooding and intense storms that produce energetic wave/current conditions. Thick winter deposits composed of recently discharged fluvial sediment are formed in upper thalwegs, with distinct short- and long-lived radioisotopic and textural signatures (detectable ⁷Be and ²³⁴Th_xs, lowered ²¹⁰Pb activity, elevated clay content, and physical structures). Box and kasten cores were collected in the upper canyon (thalwegs and walls) to measure these signatures in recent and preserved winter deposits, and to calculate 100-yr accumulation rates. Non-bioturbated deposits (that have signatures indicative of rapid accretion by gravity-driven flows during the winter) are common in the upper canyon thalwegs. Short-lived radioisotopes (⁷Be and ²³⁴Th) show that sediment delivery to the upper thalweg varies temporally, sometimes beginning at the onset of river flooding, and at other times beginning during fall/early winter dry-storm events. In contrast, bioturbated deposits (which do not have signatures indicative of rapid deposition) are found on canyon walls.Non-bioturbated winter deposits are easily identified in the decadal record of thalwegs by decreases in ²¹⁰Pb activity and increases in clay content. Stacking of multiple years of winter deposits (∼10 cm preserved per winter) results in non-steady-state ²¹⁰Pb profiles and high decadal accumulation rates. However, down-core changes in ²¹⁰Pb profiles show that slope failures are actively redistributing these winter deposits. Partial or total removal of multiple winter deposits appears to happen periodically (every ∼13 yr), which will inhibit preservation of the longer decadal record. 100-yr accumulation rates were calculated in the thalwegs from the resulting ²¹⁰Pb profiles (i.e., the result of winter accretion and decadal removal by failures). Accumulation rates are much higher in thalwegs (1–6 cm/yr) than walls (0.1–0.8 cm/yr), which is likely the result of differing sediment delivery processes (via gravity-driven flows and nepheloid layers, respectively). At least 2.6±1.4% of the Eel River sediment budget is accumulating in the upper canyon over 100-yr timescales. However, this value greatly underestimates the total amount entering the canyon system because minimum accumulation rates were used in many areas (due to limited core length) and slope failures are moving sediment out of the budget area.     

Effects of environmental regulations on heavy metal pollution decline in core sediments from Manila Bay

We investigated the high-resolution heavy metal pollution history of Manila Bay using heavy metal concentrations and Pb isotope ratios together with ²¹⁰Pb dating to find out the effects of environmental regulations after the 1990s. Our results suggested that the rate of decline in heavy metal pollution increased dramatically from the end of the 1990s due to stricter environmental regulations, Administrative Order No. 42, being enforced by the Philippines government. The presented data and methodology should form the basis for future monitoring, leading to pollution control, and to the generation of preventive measures at the pollution source for the maintenance of environmental quality in the coastal metropolitan city of Manila. Although this is the first report of a reduction in pollution in Asian developing country, our results suggest that we can expect to find similar signs of pollution decline in other parts of the world as well.     

Improving estimates of oil pollution to the sea from land-based sources

This paper presents improvements to calculation methods used in the National Research Council’s (NRC) Oil in the Sea reports from 2003 and 1985 to estimate land-based contributions of petroleum hydrocarbons to the sea from North America. Using procedures similar to the 2003 report, but with more robust methods for handling non-detections, estimated land-based contributions for 1977 and 2000 were over 50% lower than the best 1996 estimate in the NRC report. The largest loads were from the northeastern United States and the Gulf of Mexico region for both the 2003 report and updated calculations. Calculations involved many sources of uncertainty, including lack of available data, variable methods of measuring and reporting data, and variable methods of reporting values below detection limits. This updated analysis of land-based loads of petroleum hydrocarbons to the sea highlights the continued need for more monitoring and research on inputs, fates and effects of these sources.     

Interrelations between secular sea level variations and subsidence of coastal areas in the North sea

Summary The effect of secular sea level variations on coastal levelling nets was considered for some parts of the North West European Lowlands levelling. On neglecting local geological influences a simplified global model was used for treating the following problems: (1) Magnitude of secular tilt effects in NWELL due to possible sea level variations; (2) Levelling errors due to sea tide loadings.     

A 130 year record of pollution in the Suances estuary (southern Bay of Biscay): implications for environmental management

Geochemical composition (Al, Zn, Pb, Cd, Cu, Ni, Cr and As) and foraminiferal assemblages in surface and core sediments were determined to assess the current situation and the recent environmental transformation of the Suances estuary (southern Bay of Biscay, Spain). Dating of the historical record has been achieved using isotopic analysis (²¹⁰Pb, ¹³⁷Cs) and two benchmark events such as the beginning of the mineral exploitation in the Reocín Pb-Zn deposits and the evolution of the chlor-alkali industry (inputs of Hg). Concentrations of Zn, Pb and Cd in both surface and core samples are remarkably higher than background values, reflecting the existence of significant amounts of polluted materials. The dramatic environmental impact of this pollution is clearly recorded by the change of the foraminiferal assemblages that even reach an afaunal stage during recent decades. Application of two different sets of Sediment Quality Guidelines confirm that they exert potential risk to the environment, and therefore if dredged they should need specific management measures.The results provide a reference database to monitor future environmental changes in the Suances estuary, particularly as regards the contaminated sediment storage and the re-colonization by autochtonous meiofauna.     

环境条件对极大螺旋藻金属元素吸收的影响

研究卫不同微量元素浓度和不同ＥＤＴＡ加入量对极大螺旋藻金属元素吸收的影响。结果显示,增加培养基中的微量元素含量有利于藻细胞对金属元素的吸收。少量ＥＤＴＡ的加入,有助于部分金属元素的吸收,较大量的ＥＤＴＡ可阻碍金属元素的吸收。藻细胞的吸附实验表明,极大螺旋藻对Ｃｏ、Ｎｉ、Ｃｕ、Ｚｎ、Ｐｂ有很强的吸附能力,死细胞与活细胞的吸附能力相近,表明这一吸附过程不依赖于生理活动。     

Mine-derived metal pollution in the Isle of Man

The sediments of rivers draining areas of past mining activity in the Isle of Man contained greatly enhanced levels of zinc, lead and, to a lesser extent, copper and cadmium. This contamination extended into the estuarine harbours where it was reflected in the metal content of four species of bivalve molluscs. Of the latter, Mytilus edulis was the most useful indicator species in that it occurred in all five estuarine harbours but Scrobicularia plana, although of more limited distribution, concentrated much higher levels of zinc and lead. Individual variation of metal levels was high in all species of bivalves examined; a negative correlation of dry weight: metal content was demonstrated in many cases, but other factors may also contribute to such variation.     

综合应力遥感扩大勘探海西陆缘水溶气创新能源环保防灾

本文分析当前国际社会经济快速发展,面临能源、环保危机,正在发展绿色能源、可再生能源、水能、风能、太阳能、生物质能等代替矿物燃料煤、石油、天然气,但当前各项新能源都受到各自的自然条件、科技理论实践、成本等多方面制约,还不能满足需求.为拯救当前危机,寻找低碳、无碳水溶气能源应召而出.本科研组应用经典的地质、物化探和自主创新的卫星应力遥感、生物化学综合法勘探海西陆缘连江盆地水溶气能源,获得中温型水溶气能源(已用多年),并继续深入研究开发高温、低温型水溶气能源.其实验报告,文内阐明.     

Trace metal pollution and its influence on the community structure of soft bottom molluscs in intertidal areas of the Dar es Salaam coast, Tanzania

The influence of trace metal pollution on the community structure of soft bottom molluscs was investigated in intertidal areas of the Dar es Salaam coast. Significant enrichment of As, Mn, Mo, Sb, and Zn in sediments was recorded. Redundancy analysis indicated that trace metal pollution contributed 68% of the variation in community structure. Monte Carlo permutation test showed that As and Sb contributed significantly to variation in species composition. T-value biplots and van Dobben circles showed that the gastropods Acteon fortis, Assiminea ovata, and Littoraria aberrans, were negatively affected by As and Sb, while the bivalve Semele radiata and the gastropod Conus litteratus were only negatively affected by As. Bioaccumulation of As, Cd, Cu, Mo and Zn occurred in the bivalve Mactra ovalina and the gastropod Polinices mammilla. This calls for regular monitoring and management measures.     

An approach to the assessment of local trace metal pollution in the Mediterranean marine atmosphere

Assessing the extent of local trace metal pollution in marine atmospheric particulates presents a number of difficulties, and one potential approach to the problem has been evaluated by reference to a series of aerosols from the lower troposphere over the Eastern Mediterranean. This region, which is less remote from the continents than open-ocean areas, has two significantly different atmospheric particulate catchments: being bordered in the north by nations having industrialized, semi-industrialized and rural economies, and in the south by the North African desert belt. The elemental chemistry of the particulates is illustrated in terms of the distributions of Fe and Pb, which are presented in the form of enrichment factor diagrams, and is shown to be essentially controlled by the dilution of a ‘European’ background material, common to ‘remote’ regions of the latitudinal belt, with crust-derived, desert components. Major local perturbations in the dilution relationship can occur when either crust-derived or pollutant components strongly dominate the total particulate population. The extent of these local perturbations can be tentatively assessed using appropriate enrichment factor diagrams, which offer a framework within which to interpret the elemental chemistry of marine atmospheric particulates providing sufficient data is available for their construction. By using such an EF diagram it is suggested that the Eastern Mediterranean atmospheric particulates have not suffered local pollution on a gross scale with respect to Pb.     

Distribution characteristics of Rayleigh wave group velocity in China mainland and its adjacent sea areas

Making use of 75 earthquake data of China mainland and adjacent areas recorded by long period seismometers of 27 stations of China and 3 stations of WWSSN and processed by match-filtering frequency-time analysis technique and grid dispersion inversion, the authors obtain pure-path dispersion curves of Rayleigh surface wave in 147 grids in this paper. The distribution characteristics of group velocity are as follows:the China mainland and its adjacent sea areas are divided into two parts of east and west by South-North belt and are separated in blocks of south and north with boundaries of 44°–44°N,28°N (in the west part) and 28°–32°N (in the east part), the first and third boundaries may extend eastward into sea regions, in the west side of island arc and continental shelves, appears belt-form distribution of group velocity striping NE direction. These distribution characteristics correspond to zonation of tectonic structure. In addition, the results also indicate that the differences of group velocity dispersion curves exist between tectonic elements of next order. It is revealable for the differences of group velocity among different tectonic elements until periodT = 113s (corresponding depth is about 170km). The Chinese version of this paper appeared in the Chinese edition ofActa Seismologica Sinica,15, 32–38, 1993.     

Nematode response to metal, PAHs and organic enrichment in tourist marinas of the mediterranean sea

The structure of nematode assemblages was investigated in the sediments of two different tourist marinas in the Mediterranean Sea and related to pollution variables. Nematode densities and generic compositions were determined, as were concentrations of heavy metals, PAHs and organic matter. Results showed different assemblages at the two marinas, with a dominance of the genera Paralongicyatholaimus and Daptonema. Significant correlations between nematodes and concentrations of environmental contaminants were found. In particular, Paralongicyatholaimus showed a significant negative correlation with Cu concentrations and was almost absent at the stations where higher Cu concentrations were found. The presence of sensitive/tolerant nematode genera represents a promising tool to identify areas subjected to a higher level of disturbance and to define the correct environmental management strategy for harbors.     

Physiological disturbance of the Manila clam,Ruditapes philippinarum,by altered environmental conditions in a tidal flat on the west coast of Korea

To examine the influence of habitat alteration by tideflat reclamation on the physiological ecology of Ruditapes philippinarum, seasonal variations in its condition, gross biochemical composition, and reproductive cycle were compared for a yearly cycle between a reclaimed flat (Gomsohang, GS) and a natural flat (Hajun, HJ) in Gomso Bay, Korea. Concentrations of chlorophyll a and seston (as well as its energy value as food available to the clam) were consistently higher at HJ than at GS. Condition, dry tissue weight, and energy reserves (proteins and carbohydrates) of the clams were much higher at HJ than at GS during spring–summer, when fast growth and gametogenic development occur. Furthermore, their spring gametogenic development and spawning were advanced at HJ compared with GS. Our results suggest that the Manila clam encounters nutritionally stressful environmental conditions in altered habitats after tideflat reclamation that lead to lowered nutrient accumulation and a changing reproductive cycle.