The Thermodynamics of Ordered Perovskites on the CaTiO3-FeTiO3 Join

The enthalpies of formation from ilmenite, FeTiO₃, and perovskite, CaTiO₃, of two intermediate ordered perovskite phases, CaFeTi₂O₆ and CaFe₃Ti₄O₁₂, have been measured at 801°C using oxide melt solution calorimetry. These data, in combination with experiments at high pressure and temperature, indicate that below 1518±50°C CaFe₃Ti₄O₁₂ is stable at lower pressures (∼7 GPa at 1200°C) than CaFeTi₂O₆ (∼13 GPa at 1200°C). This relationship should be reversed, and CaFeTi₂O₆ should become stable at lower pressures than CaFe₃Ti₄O₁₂, at temperatures above 1518±50°C. These intermediate phases are of petrological interest because they form as a reaction between two minerals, ilmenite and perovskite, which are commonly associated in kimberlites, and because their pressure-temperature range of formation overlaps that of origin of kimberlites. Received: 10 November 1997 / Revised; accepted: 15 January 1998     

Determination of the phase boundary between ilmenite and perovskite in MgSiO3 by in situ X-ray diffraction and quench experiments

Determination of the phase boundary between ilmenite and perovskite structures in MgSiO₃ has been made at pressures between 18 and 24 GPa and temperatures up to 2000 °C by in situ X-ray diffraction measurements using synchrotron radiation and quench experiments. It was difficult to precisely define the phase boundary by the present in situ X-ray observations, because the grain growth of ilmenite hindered the estimation of relative abundances of these phases. Moreover, the slow reaction kinetics between these two phases made it difficult to determine the phase boundary by changing pressure and temperature conditions during in situ X-ray diffraction measurements. Nevertheless, the phase boundary was well constrained by quench method with a pressure calibration based on the spinel-postspinel boundary of Mg₂SiO₄ determined by in situ X-ray experiments. This yielded the ilmenite-perovskite phase boundary of P (GPa) = 25.0 (±0.2) – 0.003 T (°C) for a temperature range of 1200–1800 °C, which is generally consistent with the results of the present in situ X-ray diffraction measurements within the uncertainty of ∼±0.5 GPa. The phase boundary thus determined between ilmenite and perovskite phases in MgSiO₃ is slightly (∼0.5 GPa) lower than that of the spinel-postspinel transformation in Mg₂SiO₄. Received: 19 May 1999 / Accepted: 21 March 2000     

A study of phase transformation in hedenbergite to 40 GPa at ∼1200° C

Phase transformations in a natural sample of hedenbergite ((Ca_0.93Fe_0.61Mn_0.34Mg_0.08Na_0.01Zn_0.02Al_0.003)Si₂O₆) have been studied by X-ray diffraction up to 40 GPa at ∼ 1200°C in a diamond anvil cell interfaced with a laser heating system. The starting hedenbergite phase decomposed into a garnet plus γ-spinel and stishovite at ∼ 14 GPa; then into garnet plus stishovite and wüstite at ∼ 18 GPa; and finally into perovskite plus stishovite and wüstite at pressures higher than ∼ 24 GPa. On decompression to 0.1 MPa, all the high pressure phases are retained except for the cubic perovskite, which reverts back into the ɛ-CaSiO₃ phase, in accordance with previous reports. Energy-dispersive SEM analyses show that the garnet is present as a calcium-rich ABO ₃-type phase. As no garnet phase has been previously observed either in pure CaSiO₃ or in pure CaMgSi₂O₆, it appears that the observed calcium-rich garnet phase has been stabilized by the presence of other cations such as the Na⁺, Zn²⁺, Mn²⁺, Fe²⁺, Mn³⁺, Fe³⁺ and Al³⁺.     

Dissociation of CAS phase in the uppermost lower mantle

The high-pressure stability limit of calcium aluminosilicate (CAS) phase has been examined in its end-member CaAl₄Si₂O₁₁ composition at 18–39 GPa and 1,670–2,300 K in a laser-heated diamond-anvil cell (LHDAC). The in-situ synchrotron X-ray diffraction measurements revealed that the CAS phase decomposes into three-phase assemblage of cubic Al-bearing CaSiO₃ perovskite, Al₂O₃ corundum, and SiO₂ stishovite above 30 GPa and 2,000 K with a positive pressure–temperature slope. Present results have important implications for the subsolidus mineral assemblage of subducted sediment and the melting phase relation of basalt in the lower mantle.     

Decomposition of kyanite and solubility of Al2O3 in stishovite at high pressure and high temperature conditions

In order to constrain the high-pressure behavior of kyanite, multi-anvil experiments have been carried out from 15 to 25 GPa, and 1,350 to 2,500°C. Both forward and reversal approaches to phase equilibria were adopted in these experiments. We find that kyanite breaks down to stishovite + corundum at pressures above ∼15 GPa, and stishovite + corundum should be the stable phase assemblage at the pressure–temperature conditions of the transition zone and the uppermost part of the lower mantle of the Earth, in agreement with previous multi-anvil experimental studies and ab initio calculation results, but in disagreement with some of the diamond-anvil cell experimental studies in the literature. The Al₂O₃ solubility in nominally dry stishovite has been tightly bracketed by forward and reversal experiments; it is slightly but consistently reduced by pressure increase. Its response to temperature increase, however, is more complicated: increases at low temperatures, maximizes at around 2,000°C, and perhaps decreases at higher temperatures. Consequently, the Al₂O₃ solubility in dry stishovite at conditions of high temperature–high pressure is very limited.     

Phase boundary between ilmenite and perovskite structures in MnGeO3 determined by in situ X-ray diffraction measurements

In situ X-ray observations of the phase transition from ilmenite to perovskite structure in MnGeO₃ were carried out in a Kawai-type high-pressure apparatus interfaced with synchrotron radiation. The phase boundary between the ilmenite and perovskite structures in the temperature range of 700–1,400°C was determined to be P (GPa) = 16.5(±0.6) − 0.0034(±0.0006)T (°C) based on Anderson’s gold pressure scale. The Clapeyron slope, dP/dT, determined in this study is consistent with that for the transition boundary between the ilmenite and the perovskite structure in MgSiO₃.     

High-pressure phase transformations in the MgFe2O4 and Fe2O3–MgSiO3 systems

 The crystal structure of MgFe₂O₄ was investigated by in situ X-ray diffraction at high pressure, using YAG laser annealing in a diamond anvil cell. Magnesioferrite undergoes a phase transformation at about 25 GPa, which leads to a CaMn₂O₄-type polymorph about 8% denser, as determined using Rietveld analysis. The consequences of the occurrence of this dense MgFe₂O₄ form on the high-pressure phase transformations in the (MgSi)_0.75(Fe^III)_0.5O₃ system were investigated. After laser annealing at about 20 GPa, we observe decomposition to two phases: stishovite and a spinel-derived structure with orthorhombic symmetry and probably intermediate composition between MgFe₂O₄ and Mg₂SiO₄. At pressures above 35 GPa, we observe recombination of these products to a single phase with Pbnm perovskite structure. We thus conclude for the formation of Mg₃Fe₂Si₃O₁₂ perovskite. Received: 27 March 2000 / Accepted: 1 October 2000     

Study on Al2O3 content and phase stability of aluminous-CaSiO3 perovskite at high pressure and temperature

 In order to clarify Al₂O₃ content and phase stability of aluminous CaSiO₃-perovskite, high-pressure and high-temperature transformations of Ca₃Al₂Si₃O₁₂ garnet (grossular) were studied using a MA8-type high-pressure apparatus combined with synchrotron radiation. Recovered samples were examined by analytical transmission electron microscopy. At pressures of 23–25 GPa and temperatures of 1000–1600 K, grossular garnet decomposed into a mixture of aluminum-bearing Ca-perovskite and corundum, although a metastable perovskite with grossular composition was formed when the heating duration was not long enough at 1000 K. On release of pressure, this aluminum-bearing CaSiO₃-perovskite transformed to the “LiNbO₃-type phase” and/or amorphous phase depending on its Al₂O₃ content. The structure of this LiNbO₃-type phase is very similar to that of LiNbO₃ but is not identical. CaSiO₃-perovskite with 8 to 25 mol% Al₂O₃ was quenched to alternating lamellae of amorphous layer and LiNbO₃-type phase. On the other hand, a quenched product from CaSiO₃-perovskite with less than 6 mol% consisted only of amorphous phase. Most of the inconsistencies amongst previous studies could be explained by the formation of perovskite with grossular composition, amorphous phase, and the LiNbO₃-type phase. Received: 11 April 2001 / Accepted: 5 July 2002     

Trace-element partitioning between garnet,clinopyroxene and Fe-rich picritic melts at 3 to 7 GPa

We have determined mineral-melt partition coefficients (D values) for 20 trace elements in garnet-pyroxenite run products, generated in 3 to 7 GPa, 1,425–1,750°C experiments on a high-Fe mantle melt (97SB68) from the Paraná-Etendeka continental-flood-basalt (CFB) province. D values for both garnet (∼Py₆₃Al₂₅Gr₁₂) and clinopyroxene (∼Ca_0.2Mg_0.6Fe_0.2Si₂O₆) show a large variation with temperature but are less dependent on pressure. At 3 GPa, D ^cpx/liq values for pyroxenes in garnet-pyroxenite run products are generally lower than those reported from Ca-rich pyroxenes generated in melting experiments on eclogites and basalts (∼Ca_0.3–0.5Mg_0.3–0.6Fe_0.07–0.2Si₂O₆) but higher than those for Ca-poor pyroxenes from peridotites (∼Ca_0.2Mg_0.7Fe_0.1Si₂O₆). D ^grt/liq values for light and heavy rare-earth elements are ≤0.07 and >0.8, respectively, and are similar to those for peridotitic garnets that have comparable grossular but higher pyrope contents (Py_70–88Al_l7–20Gr_8–14). 97SB68 D _LREE^grt/liq values are higher and D _HREE^grt/liq values lower than those for eclogitic garnets which generally have higher grossular contents but lower pyrope contents (Py_20–70Al_10–50Gr_10–55). D values agree with those predicted by lattice strain modelling and suggest that equilibrium was closely approached for all of our experimental runs. Correlations of D values with lattice-strain parameters and major-element contents suggest that the wollastonite component and pyrope:grossular ratio exert major controls on 97SB68 clinopyroxene and garnet partitioning, respectively. These are controlled by the prevailing pressure and temperature conditions for a given bulk-composition. The composition of co-existing melt was found to have a relatively minor effect on 97SB68 D values. The variations in D values displayed by different mantle lithologies are subtle and our study confirms previous investigations which have suggested that the modal proportions of garnet and clinopyroxene are by far the most influential factor in determining incompatible trace-element concentrations in mantle melts. The trace-element partition coefficients we have determined may be used to place high-pressure constraints on garnet-pyroxenite melting models.     

Phase equilibria for the Fe2SiO4–Fe3O4 system under high pressure

High pressure phase relation of the system Fe₂SiO₄–Fe₃O₄ was investigated by synthesis experiments using multi-anvil high pressure apparatus. A complete solid solution with spinel structure along Fe₂SiO₄–Fe₃O₄ join occurs above 9 GPa at 1200 °C. Lattice constants of the solid solution show almost linear variation with composition. A spinelloid phase is stable for intermediate compositions in the pressure range from 3 to 9 GPa. the synthesized spinelloid phase is successfully indexed assuming nickel aluminosilicate V type structure. Received: October 16, 1995 / Revised, accepted: March 19, 1997     

High temperature stability limit of phase egg, AlSiO3(OH)

The stability relations of phase egg, AlSiO₃(OH), have been investigated at pressures from 7 to 20 GPa, and temperatures from 900 to 1700 °C in a multi-anvil apparatus. At the lower pressures phase egg breaks down according to the univariant reaction, phase egg = stishovite + topaz-OH, which extends from 1100 °C at 11 GPa to 1400 °C at 13 GPa where it terminates at an invariant point involving corundum. At pressures above the invariant point, the stability of phase egg is limited by the breakdown reaction, phase egg = stishovite + corundum + fluid, which extends from the invariant point to 1700 °C at 20 GPa. Stishovite crystallized in the Al₂O₃-SiO₂-H₂O system contains Al₂O₃, and the amount of Al₂O₃ increases with increasing temperature. It is inferred that the Al₂O₃ content is controlled by the charge-balanced substitution of Si⁴⁺ by Al³⁺ and H⁺. Aluminum-bearing stishovite coexisting with an H₂O-rich fluid may contain a certain amount of water. Therefore, phase egg and stishovite in a subducting slab could transport some H₂O into the deep Earth. Received: 14 October 1998 / Accepted: 19 May 1999     

Mantle melting in equilibrium with an Iron–Wüstite–Graphite buffered COH-fluid

Partial melting experiments on a San Carlos peridotite were done in a Walker type multi-anvil press at pressures from 5 to 12.5 GPa. Experiments were done in the presence of a COH-fluid and at oxygen fugacity controlled by the Fe–FeO buffer. Olivine, clinopyroxene, garnet and orthopyroxene are stable in all but the highest temperature 10 GPa experiments where olivine and garnet coexist, and the highest temperature 5 GPa experiments where olivine is the single crystalline phase. The solidus at 5 GPa was found to be at approximately 1,200°C and the liquidus was estimated to be at 1,325°C, which is ∼500°C lower than has been reported for dry melting of peridotite. The aluminum concentration of the melts decreases with increasing melt fraction and decreases also with increasing pressure. At 5 GPa the melts have a CaO/Al₂O₃-ratio of 0.85–1.0, which is similar to that of undepleted komatiites; major element concentrations are also identical to those of undepleted komatiites such as the Munro komatiites. At 10 and 12.5 GPa the partial melts have CaO/Al₂O₃-ratios above 1.5 and major element composition almost identical to aluminum depleted komatiites such as the Barberton komatiites. We therefore conclude that in the presence of a reducing COH-fluid both aluminum-depleted and -undepleted komatiites could have formed at temperatures much lower than generally accepted.     

Pressure dependence of electrical conductivity of (Mg,Fe)SiO<Subscript>3</Subscript> ilmenite

The electrical conductivity of (Mg_0.93Fe_0.07)SiO₃ ilmenite was measured at temperatures of 500–1,200 K and pressures of 25–35 GPa in a Kawai-type multi-anvil apparatus equipped with sintered diamond anvils. In order to verify the reliability of this study, the electrical conductivity of (Mg_0.93Fe_0.07)SiO₃ perovskite was also measured at temperatures of 500–1,400 K and pressures of 30–35 GPa. The pressure calibration was carried out using in situ X-ray diffraction of MgO as pressure marker. The oxidation conditions of the samples were controlled by the Fe disk. The activation energy at zero pressure and activation volume for ilmenite are 0.82(6) eV and −1.5(2) cm³/mol, respectively. Those for perovskite were 0.5(1) eV and −0.4(4) cm³/mol, respectively, which are in agreement with the experimental results reported previously. It is concluded that ilmenite conductivity has a large pressure dependence in the investigated P–T range.     

High-pressure transformations of ilmenite to perovskite, and lithium niobate to perovskite in zinc germanate

In-situ X-ray powder diffraction measurements conducted under high pressure confirmed the existence of an unquenchable orthorhombic perovskite in ZnGeO₃. ZnGeO₃ ilmenite transformed into perovskite at 30.0 GPa and 1300±150 K in a laser-heated diamond anvil cell. After releasing the pressure, the lithium niobate phase was recovered as a quenched product. The perovskite was also obtained by recompression of the lithium niobate phase at room temperature under a lower pressure than the equilibrium phase boundary of the ilmenite–perovskite transition. Bulk moduli of ilmenite, lithium niobate, and perovskite phases were calculated on the basis of the refined X-ray diffraction data. The structural relations among these phases are considered in terms of the rotation of GeO₆ octahedra. A slight rotation of the octahedra plays an important role for the transition from lithium niobate to perovskite at ambient temperature. On the other hand, high temperature is needed to rearrange GeO₆ octahedra in the ilmenite–perovskite transition. The correlation of quenchability with rotation angle of GeO₆ octahedra for other germanate perovskites is also discussed.     

Hydrostatic compression and crystal structure of pyrope to 33 GPa

The equation of state and crystal structure of pyrope were determined by single crystal X-ray diffraction under hydrostatic conditions to 33 GPa, a pressure that corresponds to a depth of about 900 km in the lower mantle. The bulk modulus K _T0 and its pressure derivative K ^' _T0 were determined simultaneously from an unweighted fit of the volume data at different pressures to a third order Birch-Murnaghan equation of state. They are 171(2) GPa and 4.4(2), respectively. Over the whole pressure range, MgO₈ polyhedra showed the largest compression of 18.10(8)%, followed by AlO₆ and SiO₄ polyhedra, with compression of 11.7(1)% and 4.6(1)%, respectively. The polyhedral bulk moduli for MgO₈, AlO₆ and SiO₄ are 107(1), 211(11) and 580(24) GPa, respectively, with K ^' _T0 fixed to 4. Significant compression of up to 1.8(1)% in the very rigid Si−O bonding in pyrope could be detected to 33 GPa. Changes in the degree of polyhedral distortion for all three types of polyhedra could also be observed. These changes could be found for the first time for AlO₆ and SiO₄ in pyrope. It seems that the compression of pyrope crystal structure is governed by the kinking of the Al−O−Si angle between the octahedra and tetrahedra. No phase transition could be detected to 33 GPa. Received: 24 March 1997 / Revised, accepted: 29 July 1997     

Stability range and decomposition of potassic richterite and phlogopite end members at 5–15 GPa

Summary The phase relations of K-richterite, KNaCaMg₅Si₈O₂₂(OH)₂, and phlogopite, K₃Mg₆ Al₂Si₆O₂₀(OH)₂, have been investigated at pressures of 5–15 GPa and temperatures of 1000–1500 °C. K-richterite is stable to about 1450 °C at 9–10 GPa, where the dp/dT-slope of the decomposition curve changes from positive to negative. At 1000 °C the alkali-rich, low-Al amphibole is stable to more than 14 GPa. Phlogopite has a more limited stability range with a maximum thermal stability limit of 1350 °C at 4–5 GPa and a pressure stability limit of 9–10 GPa at 1000 °C. The high-pressure decomposition reactions for both of the phases produce relatively small amounts of highly alkaline water-dominated fluids, in combination with mineral assemblages that are relatively close to the decomposing hydrous phase in bulk composition. In contrast, the incongruent melting of K-richterite and phlogopite in the 1–3 GPa range involves a larger proportion of hydrous silicate melts. The K-richterite breakdown produces high-Ca pyroxene and orthoenstatite or clinoenstatite at all pressures above 4 GPa. At higher pressures additional phases are: wadeite-structured K₂Si^VISi^IV ₃O₉ at 10 GPa and 1500 °C, wadeite-structured K₂Si^VISi^IV ₃O₉ and phase X at 15 GPa and 1500 °C, and stishovite at 15 GPa and 1100 °C. The solid breakdown phases of phlogopite are dominated by pyrope and forsterite. At 9–10 GPa and 1100–1400 °C phase X is an additional phase, partly accompanied by clinoenstatite close to the decomposition curve. Phase X has variable composition. In the KCMSH-system (K₂CaMg₅Si₈O₂₂(OH)₂) investigated by Inoue et al. (1998) and in the KMASH-system investigated in this report the compositions are approximately K₄Mg₈Si₈O₂₅(OH)₂ and K_3.7Mg_7.4Al_0.6Si_8.0O₂₅(OH)₂, respectively. Observations from natural compositions and from the phlogopite-diopside system indicate that phlogopite-clinopyroxene assemblages are stable along common geothermal gradients (including subduction zones) to 8–9 GPa and are replaced by K-richterite at higher pressures. The stability relations of the pure end member phases of K-richterite and phlogopite are consistent with these observations, suggesting that K-richterite may be stable into the mantle transition zone, at least along colder slab geotherms. The breakdown of moderate proportions of K-richterite in peridotite in the upper part of the transition zone may be accompanied by the formation of the potassic and hydrous phase X. Additional hydrogen released by this breakdown may dissolve in wadsleyite. Therefore, very small amounts of hydrous fluids may be released during such a decomposition. Received April 10, 2000; revised version accepted November 6, 2000     

Single-crystal hydrostatic compression of synthetic pyrope, almandine, spessartine, grossular and andradite garnets at high pressures

The compression of synthetic pyrope Mg₃Al₂ (SiO₄)₃, almandine Fe₃Al₂(SiO₄)₃, spessartine Mn₃Al₂ (SiO₄)₃ grossular Ca₃Al₂(SiO₄)₃ and andradite Ca₃Fe₂ (SiO₄)₃ was studied by loading the crystals together in a diamond anvil cell. The unit-cell parameters were determined as a function of pressure by X-ray diffraction up to 15 GPa using neon as a pressure transmitting medium. The unit-cell parameters of pyrope and almandine were measured up to 33 and 21 GPa, respectively, using helium as a pressure medium. The bulk moduli, K _{T 0}, and their first pressure derivatives, K _{T 0} ^′, were simultaneously determined for all five garnets by fitting the volume data to a third order Birch-Murnaghan equation of state. Both parameters can be further constrained through a comparison of volume compressions between pairs of garnets, giving for K _{T 0} and K _{T 0} ^′ 171(2) GPa and 4.4(2) for pyrope, 185(3) GPa and 4.2(3) for almandine, 189(1) GPa and 4.2 for spessartine, 175(1) GPa and 4.4 for grossular and 157(1) GPa and 5.1 for andradite, where the K _{T 0} ^′ are fixed in the case of spessartine, grossular and andradite. Direct comparisons of the unit-cell volumes determined at high pressures between pairs of garnets reveal anomalous compression behavior for Mg²⁺ in the 8-fold coordinated triangular dodecahedron in pyrope. This agrees with previous studies concerning the compression behaviors of Mg²⁺ in 6-fold coordinated polyhedra at high pressures. The results show that simple bulk modulus–volume systematics are not obeyed by garnets. Received: 29 July 1998 / Revised, accepted: 7 April 1999     

Phase relations and formation of sodium-rich majoritic garnet in the system Mg3Al2Si3O12–Na2MgSi5O12 at 7.0 and 8.5 GPa

The pseudo-binary system Mg₃Al₂Si₃O₁₂–Na₂MgSi₅O₁₂ modelling the sodium-bearing garnet solid solutions has been studied at 7 and 8.5 GPa and 1,500–1,950°C. The Na-bearing garnet is a liquidus phase of the system up to 60 mol% Na₂MgSi₅O₁₂ (NaGrt). At higher content of NaGrt in the system, enstatite (up to ∼80 mol%) and then coesite are observed as liquidus phases. Our experiments provided evidence for a stable sodium incorporation in garnet (0.3–0.6 wt% Na₂O) and its control by temperature and pressure. The highest sodium contents were obtained in experiments at P = 8.5 GPa. Near the liquidus (T = 1,840°C), the equilibrium concentration of Na₂O in garnet is 0.7–0.8 wt% (∼6 mol% Na₂MgSi₅O₁₂). With the temperature decrease, Na concentration in Grt increases, and the maximal Na₂MgSi₅O₁₂ content of ∼12 mol% (1.52 wt% Na₂O) is gained at the solidus of the system (T = 1,760°С). The data obtained show that most of natural diamonds, with inclusions of Na-bearing garnets usually containing <0.4 wt% Na₂O, could be formed from sodium-rich melts at pressures lower than 7 GPa. Majoritic garnets with higher sodium concentrations (>1 wt% Na₂O) may crystallize at a pressure range of 7.0–8.5 GPa. However the upper pressure limit for the formation of naturally occurring Na-bearing garnets is restricted by the eclogite/garnetite bulk composition.     

Mineral inclusions in pyrope crystals from Garnet Ridge, Arizona, USA: implications for processes in the upper mantle

Mineral inclusions in pyrope crystals from Garnet Ridge in the Navajo Volcanic Field on the Colorado Plateau are investigated in this study with emphasis on the oxide minerals. Each pyrope crystal is roughly uniform in composition except for diffusion halos surrounding some inclusions. The pyrope crystals have near constant Ca:Fe:Mg ratios, 0.3 to 5.7 wt% Cr₂O_3, and 20 to 220 ppm H₂O. Thermobarometric calculations show that pyrope crystals with different Cr contents formed at different depths ranging from 50 km (where T ≈ 600 °C and P = 15 kbar) to 95 km (where T ≈ 800 °C and P = 30 kbar) along the local geotherm. In addition to previously reported inclusions of rutile, spinel and ilmenite, we discovered crichtonite series minerals (AM₂₁O₃₈, where A = Sr, Ca, Ba and LREE, and M mainly includes Ti, Cr, Fe and Zr), srilankite (ZrTi₂O₆), and a new oxide mineral, carmichaelite (MO_2−x(OH)_x, where M = Ti, Cr, Fe, Al and Mg). Relatively large rutile inclusions contain a significant Nb (up to 2.7 wt% Nb₂O₅), Cr (up to ∼6 wt% Cr₂O₃), and OH (up to ∼0.9 wt% H₂O). The Cr and OH contents of rutile inclusions are positively related to those of pyrope hosts, respectively. Needle- and blade-like oxide inclusions are commonly preferentially oriented. Composite inclusions consisting mainly of carbonate, amphibole, phlogopite, chlorapatite, spinel and rutile are interpreted to have crystallized from trapped fluid/melt. These minerals in composite inclusions commonly occur at the boundaries between garnet host and large silicate inclusions of peridotitic origin, such as olivine, enstatite and diopside. The Ti-rich oxide minerals may constitute a potential repository for high field strength elements (HFSE), large ion lithophile elements and light rare earth elements (LREE) in the upper mantle. The composite and exotic oxide inclusions strongly suggest an episode of metasomatism in the depleted upper mantle beneath the Colorado Plateau, contemporaneous with the formation of pyrope crystals. Our observations show that mantle metasomatism may deplete HFSE in metasomatic fluids/melts. Such fluids/melts may subsequently contribute substantial trace elements to island arc basalts, providing a possible mechanism for HFSE depletion in these rocks. Received: 20 December 1997 / Accepted: 15 October 1998     

Macrocryst Fe - Ti oxides in olivine melilitites from Namaqualand-Bushmanland South Africa

Ilmenite macrocrysts in olivine melilitites from Namaqualand-Bushmanland, South Africa, have decomposed by subsolidus reduction to form oriented Mg-titanomagnetite along {0001} ilmenite planes. Residual ilmenite contains 10–11 wt% MgO, 1 wt% MnO, and 0.1 wt% Cr₂O₃. This macrocryst assemblage is mantled by an annulus of Mg-titanomagnetite, followed by an overgrowth of radiating magnetite + perovskite. Terminal compositions of these magnetites are similar to groundmass spinels, and to the outermost margins of magnetite macrocrysts that have very high Fe³⁺ core contents. The assemblages are remarkably similar to oxide intergrowths in kimberlites and an upper mantle derivation is proposed for ilmenite macrocrysts in these melilitites. Oxidation states in the source regions are also very similar, whether on-or off-craton, being slightly above FMQ (NNO), but reduced to FMQWM with the onset of decompression, volatile loss, and carbonate immiscibility. In the case of the melilitites, late stage, low pressure crystallization above NNO precipated abundant magnetite + perovskite. The oxide fO₂ data are consistent with, and refine the fO₂ estimates obtained previously for the behavior of Fe/Mg and Ni contents in olivine from the same suite of samples.