塑性混凝土弹性模量室内试验研究

通过4种变形标距的弹性模量试验,研究了塑性混凝土弹性模量的合适测试方法。塑性混凝土棱柱体试件设置300mm、200mm、150mm和100mm共4种测试标距,其中300mm标距下的力和位移数据采用计算机自动采集,其余标距采用人工读数。结果表明,利用自动采集数据模式测得塑性混凝土弹性模量值最稳定,且其值远远小于人工读数模式下的值;一般而言,测试标距小,弹性模量值大,全长标距下弹性模量值最小;利用自动采集数据模式下得到单轴压缩应力应变曲线具有典型初始压缩弯曲段、较长的下降段,而人工读数下几乎不能测出初始压缩弯曲段,而主要表现为较长直线上升段。分析了塑性混凝土利用普通混凝土弹性模量计算公式的不足,提出利用其单轴峰值强度的0.3倍、0.7倍对应的点计算其弹性模量。同时提出室内测试塑性混凝土弹性模量试验时不需预压。     

Numerical study of the biaxial compressive strength of high strength concrete based on a yield design micromechanical approach

This paper presents a numerical study of high strength concrete microstructure effects on its uniaxial and biaxial compressive strengths. Concrete is first represented as a set of angular aggregates interacting within a cement paste matrix. Then, a yield design kinematic approach is conducted at the mesoscopic scale in order to determine the concrete compressive strength for a given loading path. The proposed model, having a low computational cost, is able to capture the main microstructure effects already observed in literature on concrete uniaxial compressive strength, in particular, the aggregates volume fraction and maximal size effects. Finally, the proposed model also predicts the biaxial failure envelope of high strength concrete and confirms some experimental trends observed in literature.     

岩体变形模量的尺寸效应

岩土工程中,现场岩体的承压板试验和变形试验可看作是不同尺寸岩体的变形试验。在某工程的现场岩石力学试验中,对同一组试点的岩体先后进行了承压板变形试验和承载力试验,研究了岩体变形模量的尺寸效应,结果表明,岩体变形模量主要受岩体中的裂隙发育状况控制,当岩体质量较好时,可以由承载力试验曲线来确定岩体的变形特性,这一做法具有一举两得的效果。     

细粒含量对饱和砂土动弹性模量与阻尼比的影响研究

利用GDS循环三轴试验系统,进行一系列不同细粒含量砂土的不排水动三轴试验,研究细粒含量对饱和砂土动弹性模量与阻尼比的影响。试验结果表明,砂土的动弹性模量随细粒含量的增加而减小,但当超过细粒含量的临界值30%后,变化趋势则相反;阻尼比随着细粒含量的增加呈现先增大后减小的趋势,其细粒含量的临界值也为30%。当细粒含量小于30%时,砂土的动力特性主要由粗粒决定,粗粒间形成的骨架孔隙比随细粒含量的增加而增大,相同应变水平下抵抗变形的能力随之减弱,从而使动弹性模量减小。同时,土颗粒间接触点的减少使应力波在土中传播速度变慢,使得土体对动荷载反应的滞后性增强,阻尼比随之增加;当细粒含量大于30%后,砂土的动力特性主要由细粒决定,细粒间孔隙比随着细粒含量的增加而减小,从而使砂土的动弹性模量与阻尼比呈现出相反的变化趋势     

风积沙轻骨料混凝土冻融损伤及寿命预测研究

基于浮石轻骨料混凝土为基础, 将不同质量的风积沙作为细骨料替代部分河砂, 研究风积沙轻骨料混凝土冻融损伤机理及服役寿命. 通过室内快速冻融循环试验, 定量分析风积沙轻骨料混凝土的抗冻耐久性能. 在整个冻融循环期内, 相对动弹性模量的变化规律可分为直线下降阶段、 直线+曲线下降阶段、 曲线下降阶段. 以此为基础, 建立轻骨料混凝土直线和曲线双段式相对动弹性模量衰减方程, 依据5组混凝土的抗冻试验结果对方程进行了验证, 并预测其在西部地区的服役寿命. 结果表明: 直线和曲线双段式的相对动弹性模量衰减方程能够准确的反应混凝土冻融损伤劣化规律. 风积沙最优替代率为20%, 可以满足25 a的使用寿命. 损伤模型可为沙漠地区混凝土使用提供一定的理论依据.     

钢纤维煤矸石混凝土抗冻性能及损伤模型研究

为研究钢纤维煤矸石混凝土的抗冻性能,以冻融循环次数和钢纤维掺量为主要变量,通过快速冻融试验,研究不同掺量的钢纤维煤矸石混凝土的表观形貌、质量损失、相对动弹性模量和抗压强度的变化规律;并依据钢纤维煤矸石混凝土动弹性模量的变化,定义钢纤维煤矸石混凝土的损伤变量,建立冻融环境下钢纤维煤矸石混凝土的损伤模型。研究结果表明：在冻融环境作用下掺入适量的钢纤维能够降低煤矸石混凝土的质量损失和减缓相对动弹性模量的下降,提高煤矸石混凝土的抗冻性能;依据损伤变量提出的损伤模型与试验数据符合较好,可以为冻融环境下钢纤维煤矸石混凝土的耐久性研究提供理论参考。     

应力松弛作用对未固结砂岩等效弹性性质的影响

未固结碎屑砂岩储层是国内外重要的油气储层类型之一,其物理本质是由离散颗粒组成的软凝聚态物质.在地震勘探中通常使用Hertz-Mindlin等效介质模型来计算未固结砂岩的地震弹性特征,但该模型在使用中通常会得到明显偏高的剪切模量值.基于3D离散元技术,对颗粒介质在单轴压缩与纯剪两种过程中的力学响应进行离散元数值模拟,从微...     

Study of bond stress–slip relationship and radial dilation in prestressed concrete

This paper presents two test procedures for evaluating the bond stress–slip and the slip–radial dilation relationships when the prestressing force is transmitted by releasing the steel (wire or strand) in precast prestressed elements. The bond stress–slip relationship is obtained with short length specimens, to guarantee uniform bond stress, for three depths of the wire indentation (shallow, medium and deep). An analytical model for bond stress–slip relationship is proposed and compared with the experimental results. The model is also compared with the experimental results of other researchers. Since numerical models for studying bond‐splitting problems in prestressed concrete require experimental data about dilatancy angle (radial dilation), a test procedure is proposed to evaluate these parameters. The obtained values of the radial dilation are compared with the prior estimated by numerical modelling and good agreement is reached. Copyright © 2012 John Wiley & Sons, Ltd.     

钢管混凝土叠合柱弹性波CT空洞与脱空缺陷检测分析

钢管混凝土叠合柱是在钢筋混凝土柱中部设置钢管混凝土的一种叠合构件,其缺陷检测已是工程检测领域面临的重要问题。弹性波CT技术是一种发展迅速的工程无损检测技术,能够直观、准确地显示出物体的内部缺陷。针对影响叠合柱性能的空洞与脱空缺陷,探索了弹性波CT无损检测技术,设计了带空洞素混凝土柱、带空洞叠合柱、带脱空叠合柱三个试件,并开展了叠合柱弹性波CT缺陷检测试验。研究结果表明,弹性波CT能够有效地检测叠合柱的空洞与脱空缺陷,填补了叠合柱缺陷检测领域的空白。     

Modelling the flow of self‐compacting concrete

A Lagrangian particle‐based method, smooth particle hydrodynamics (SPH), is used in this paper to model the flow of self‐compacting concretes (SCC) with or without short steel fibres. An incompressible SPH method is presented to simulate the flow of such non‐Newtonian fluids whose behaviour is described by a Bingham‐type model, in which the kink in the shear stress vs shear strain rate diagram is first appropriately smoothed out. The viscosity of the SCC is predicted from the measured viscosity of the paste using micromechanical models in which the second phase aggregates are treated as rigid spheres and the short steel fibres as slender rigid bodies. The basic equations solved in the SPH are the incompressible mass conservation and Navier–Stokes equations. The solution procedure uses prediction–correction fractional steps with the temporal velocity field integrated forward in time without enforcing incompressibility in the prediction step. The resulting temporal velocity field is then implicitly projected on to a divergence‐free space to satisfy incompressibility through a pressure Poisson equation derived from an approximate pressure projection. The results of the numerical simulation are benchmarked against actual slump tests carried out in the laboratory. The numerical results are in excellent agreement with test results, thus demonstrating the capability of SPH and a proper rheological model to predict SCC flow and mould‐filling behaviour. Copyright © 2010 John Wiley & Sons, Ltd.     

弹性模量和泊松比对边坡稳定安全系数的影响

根据土的弹性模量和泊松比满足双曲线关系，给出了弹性模量和泊松比折减的基本原理。通过算例分析表明，调整泊松比对安全系数的求解是有影响的，而弹性模量的影响一般较小。算例亦表明，位移控制方法具有较高的稳定性和收敛性，在运用有限元强度折减方法求解边坡的安全系数时，建议采用位移控制方法来控制其收敛性。     

A coupled damage–plasticity model for concrete based on thermodynamic principles: Part I: model formulation and parameter identification

The development of a coupled damage‐plasticity constitutive model for concrete is presented. Emphasis is put on thermodynamic admissibility, rigour and consistency both in the formulation of the model, and in the identification of model parameters based on experimental tests. The key feature of the thermodynamic framework used in this study is that all behaviour of the model can be derived from two specified energy potentials, following procedures established beforehand. Based on this framework, a constitutive model featuring full coupling between damage and plasticity in both tension and compression is developed. Tensile and compressive responses of the material are captured using two separate damage criteria, and a yield criterion with a multiple hardening rule. A crucial part of this study is the identification of model parameters, with these all being shown to be identifiable and computable based on standard tests on concrete. Behaviour of the model is assessed against experimental data on concrete. Copyright © 2007 John Wiley & Sons, Ltd.     

现浇X形混凝土桩沉桩挤土效应现场试验研究

挤土型桩的挤土效应一直是工程界研究和关注的热点问题之一。结合南京长江四桥北接线段现浇X形桩软基处理工程,首次开展现浇X形混凝土桩（简称X形桩）沉桩过程现场试验,测得不同X形横截面方向、不同距离及深度处的水平位移、侧向土压力以及孔隙水压力的分布规律,研究X形桩挤土效应规律。研究结果表明,最大水平位移发生在桩顶,距离5倍等效桩径处的土体水平位移可以忽略不计;随着桩中心距的增加,挤土压力和孔隙水压力逐渐减小,并且尖角方向的挤土压力大于凹弧方向的挤土压力。现场试验数据为X形桩的布置形式以及桩间距的选择提供有力的设计参考依据。     

堆石料湿化对混凝土面板堆石坝应力变形特性影响研究

心墙堆石坝的湿化变形已经为人们认识和重视,面板堆石坝由于上游有混凝土面板挡水,其湿化变形很少引起重视,但由湿化变形比较明显的堆石料填筑的坝体,在降雨过程中往往产生较大湿化变形,影响混凝土面板的工作性状。本文研究提出了大气降水引起堆石体达到一定饱和度情况下湿化变形的计算方法。进行了滩坑水电站混凝土面板堆石坝堆石料湿化变形试验,采用弹塑性平面有限单元法,分析研究了堆石料浸水湿化对坝体应力变形以及混凝土面板应力变形性状的影响。     

Computational mechanics of the steel–concrete interface

Concrete cracking in reinforced concrete structures is governed by two mechanisms: the activation of bond forces at the steel–concrete interface and the bridge effects of the reinforcement crossing a macro‐crack. The computational modelling of these two mechanisms, acting at different scales, is the main objective of this paper. The starting point is the analysis of the micro‐mechanisms, leading to an appropriate choice of (measurable) state variables describing the energy state in the surface systems: on the one side the relative displacement between the steel and the concrete, modelling the bond activation; on the other hand, the crack opening governing the bridge effects. These displacement jumps are implemented in the constitutive model using thermodynamics of surfaces of discontinuity. On the computational side, the constitutive model is implemented in a discrete crack approach. A truss element with slip degrees of freedom is developed. This degree of freedom represents the relative displacement due to bond activation. In turn, the bridge effect is numerically taken into account by modifying the post‐cracking behaviour of the contact elements representing discrete concrete cracks crossed by a rebar. First simulation results obtained with this model show a good agreement in crack pattern and steel stress distribution with micro‐mechanical results and experimental results. Copyright © 2001 John Wiley & Sons, Ltd.     

DUT-1合成模型冰的弯曲强度和弹性模量实验分析

依据渤海海冰物理和力学特征值和国内水池实验室能力,以1:10～1:30比尺要求,发展了DUT-1合成模型冰.文中简介该模型冰的理想参数、成分和制备过程.就其弯曲强度和弹性模量进行系统的实验分析.通过500多次弯曲实验,获得该模型冰在不同加载速度下的破坏方式,各向同性证据和弯曲强度为35～65kPa和弹性模量平均53MPa的结果.并且得到弯曲强度和弹性模量在实测湿密度范围内呈递增关系,浸水模型冰性能稳定时间超过4h,弹性模量与弯曲强度之比82%超过2000.     

堆载作用下桩体弹性模量对负摩阻力性状的影响

简要分析了桩体弹性模量对于桩体负摩阻力特性的影响机制。低弹性模量桩身压缩是桩顶位移的主要组成部分。在这种情况下桩身压缩对桩的荷载传递影响很大。在复合地基中常用的低刚度桩的桩-土相互作用分析中应当考虑桩身压缩的影响。有限元分析表明,影响桩体负摩阻力特性的桩体弹性模量存在一个临界值,当桩体弹性模量大于此值时,可以忽略桩体弹性模量对桩体负摩阻力性状的影响;桩体弹性模量小于此值时,桩身压缩变形增大,会造成中性点位置上移,桩身中最大附加应力降低。这些变化随着桩体弹性模量的降低而加剧     

甘肃大佛寺、金佛寺花岗岩体的锆石U-Pb年龄、Hf-O同位素和全岩地球化学特征及地质意义

走廊过渡带大佛寺花岗岩为弱过铝质(A/CNK=1.03~1.06),SiO_2(76.7%~78.9%)、全碱(Na2O+K2O=7.7%~8.3%)、Rb(303×10~(-6)~383×10~(-6))、Nb(32×10~(-6)~42×10~(-6))、重稀土(Yb~8×10~(-6))含量以及和FeOT/MgO(6.3~7.6)、Ga/Al(3×10-4)、Rb/Ba(3.0~6.2)比值较高,MgO(~0.1%)、CaO(0.5%~0.6%)含量较低,Ba、Sr、Eu、Ti强烈亏损,属A型花岗岩,其源岩可能为泥质岩。大佛寺花岗岩中锆石δ18O和εHf(t)值分别为7.8‰~8.6‰(平均8.24±0.13‰)和-4.8~-2.0,Hf同位素两阶段亏损地幔模式年龄1540~1717Ma,岩浆温度达到~820℃以上。北祁连造山带北缘金佛寺花岗岩为过铝质(A/CNK=1.0~1.1),SiO_2(65.5%~75.0%)、MgO(0.6%~2.2%)、Fe2O3(1.9%~5.2%)、TiO_2(0.3%~0.8%)含量变化较大,其主量和微量元素特征与北祁连造山带的柴达诺花岗岩相似,源岩可能包括杂砂岩和角闪岩。金佛寺花岗岩的锆石δ18O为7.4%~9.7‰(平均8.03±0.36‰),εHf(t)在-0.5~+1.9之间,Hf同位素两阶段亏损地幔模式年龄为1289~1439Ma,岩浆温度达到800~900℃。走廊过渡带大佛寺花岗岩、北祁连造山带北缘金佛寺花岗岩的锆石U-Pb SIMS年龄分别为426.1±2.8Ma、424.0±1.6Ma,不同构造单元发育同时期岩浆活动以及A型花岗岩的出现,表明在~425Ma北祁连洋盆已经闭合,北祁连造山带及邻区进入到后碰撞拉伸阶段。     

A coupled chemo‐thermo‐hygro‐mechanical model of concrete at high temperature and failure analysis

A hierarchical mathematical model for analyses of coupled chemo‐thermo‐hygro‐mechanical behaviour in concretes at high temperature is presented. The concretes are modelled as unsaturated deforming reactive porous media filled with two immiscible pore fluids, i.e. the gas mixture and the liquid mixture, in immiscible–miscible levels. The thermo‐induced desalination process is particularly integrated into the model. The chemical effects of both the desalination and the dehydration processes on the material damage and the degradation of the material strength are taken into account. The mathematical model consists of a set of coupled, partial differential equations governing the mass balance of the dry air, the mass balance of the water species, the mass balance of the matrix components dissolved in the liquid phases, the enthalpy (energy) balance and momentum balance of the whole medium mixture. The governing equations, the state equations for the model and the constitutive laws used in the model are given. A mixed weak form for the finite element solution procedure is formulated for the numerical simulation of chemo‐thermo‐hygro‐mechanical behaviours. Special considerations are given to spatial discretization of hyperbolic equation with non‐self‐adjoint operator nature. Numerical results demonstrate the performance and the effectiveness of the proposed model and its numerical procedure in reproducing coupled chemo‐thermo‐hygro‐mechanical behaviour in concretes subjected to fire and thermal radiation. Copyright © 2005 John Wiley & Sons, Ltd.     

Platinum group elements zoning and mineralogy of chromitites from the cumulate sequence of the Nurali massif (Southern Urals, Russia)

The Nurali lherzolite massif is one of the dismembered ophiolite bodies associated with the Main Uralian Fault (Southern Urals, Russia). It comprises a mainly lherzolitic mantle section, an ultramafic clinopyroxene-rich cumulate sequence (Transition Zone), and an amphibole gabbro unit.The cumulate section hosts small chromitite bodies at different stratigraphic heights within the sequence. Chromitite bodies from three different levels along a full section of the cumulate sequence and two from other localities were investigated. They differ in the host lithology, chromitite texture and composition, and PGE content and mineralogy. Chromitites at the lowest level, which are hosted by clinopyroxenite, form cm-scale flattened lenses. They have high Cr# and low Mg# chromites and are enriched in Pt and Pd relative to Os and Ir. At a higher, intermediate level, the chromitites are hosted by dunite. They form meter thick lenses, contain low Cr# and high Mg# chromites, have high PGE contents (up to 26,700 ppb), and are enriched in Os, Ir and Ru relative to Pt and Pd, reflecting a mineralogy dominated by laurite–erlichmanite and PGE–Fe alloys. At the highest level are chromitites hosted by olivine–enstatite rocks. These chromitites have high Cr# and relatively low Mg# chromites and very low PGE content, with laurite as the dominant PGE mineral.The platinum group minerals (PGMs) show extreme zoning, with compositions ranging from erlichmanite to almost pure laurite and from Os-rich to Ru-rich alloys, with variable and irregular zoning patterns.Two chromitite bodies up to 6 km from the main sequence can be correlated with the latter based on geochemistry and mineralogy, implying that the variations in chromitite geochemistry are due to processes that operated on the scale of the massif rather than those that operated on the scale of the outcrop.Pertsev et al. [Pertsev, A.N., Spadea, P., Savelieva, G.N., Gaggero, L., 1997. Nature of the transition zone in the Nurali ophiolite, Southern Urals. Tectonophysics 276, 163–180.] propose that the Transition Zone formed by solidification of a series of small magma bodies that partially overlapped in time and space. The magmas formed by successive partial melting of the underlying mantle. We suggest that this process determined the changing PGE geochemistry of the successive batches of magma. The PGE distribution fits a model of selected extraction from the mantle, where monosulphide solid solution–sulphide liquid equilibrium was attained until complete melting of the monosulphide solid solution. Later and localized variations in fS₂ resulted in the formation of different PGMs with complex zoning patterns.