Mineralogy and petrology of the diabasic rocks in a differentiated olivine diabase sill complex,Sierra Ancha,Arizona

The Precambrian Sierra Ancha sill complex, more than 700 feet thick, is a multiple intrusion with a central layer of feldspathic olivine-rich diabase, and upper and lower layers of olivine diabase derived from a high-alumina basalt magma. Minor rock types include albite diabase and albite-diabase pegmatite. Deuteric alteration was extensive. Principal primary minerals are plagioclase (An₇₂ to An₁₆), augite (Wo₄₃En₄₄Fs₁₃ to Wo₄₀En₃₈Fs₂₂), olivine (Fo₇₄ to Fo₅₄), orthopyroxene (En₇₇ to En₄₄), magnetite (Mgt₆₆Usp₃₄ to Mgt₈₉Usp₁₁), and ilmenite (Ilm₈₆Hem₁₄ to Ilm₉₆Hem₄). Ilmenite formed by reaction-exsolution from magnetite_ss is consistently different in compositon from primary ilmenite. Primary ilmenite became enriched in Mn and depleted in Mg as crystallization proceded. A systematic Fe-Mg partition between contacting olivine and orthopyroxene suggests that equilibrium prevailed on an extremely local scale during crystallization. Albite-diabase pegmatite contains a mineral assemblage including augite, ferrosalite (Wo₄₉En₂₈Fs₂₃ to Wo₄₉En₁₄Fs₃₇), albite (An₂ to An₀), and iron-rich chlorite. Altered diabase and albite diabase also have unusually calcium-rich pyroxenes. The calcium-rich pyroxenes, which occur in assemblages like those characterizing some spilites, are richer in calcium and lower in aluminum and titanium than basaltic augite.Contribution No. 1712 of the Division of Geological Sciences, California Institute of Technology, Pasadena, California.     

Northwest Africa 773: lunar mare breccia with a shallow-formed olivine-cumulate component, inferred very-low-Ti (VLT) heritage, and a KREEP connection

Lunar meteorite Northwest Africa 773 (herein referred to as NWA773) is a breccia composed predominantly of mafic volcanic components, including a prominent igneous clast lithology. The clast lithology is an olivine-gabbro cumulate, which, on the basis of mineral and bulk compositions, is a hypabyssal igneous rock related compositionally to volcanic components in the meteorite. The olivine-gabbro lithology exhibits cumulus textures and, in our largest section of it, includes some 48% olivine (Fo₆₄ to Fo₇₀, average Fo₆₇), 27% pigeonite (En₆₀Fs₂₄Wo₁₆ to En₆₇Fs₂₇Wo₆), 11% augite (En₅₀Fs₁₇Wo₃₃ to En₄₇Fs₁₃Wo₄₀), 2% orthopyroxene (En₇₀Fs₂₆Wo₄), 11% plagioclase (An₈₀ to An₉₄), and trace barian K-feldspar, ilmenite, Cr-spinel, RE-merrillite, troilite, and Fe-Ni metal. The Mg/Fe ratios of the mafic silicates indicate equilibration of Fe and Mg; however, the silicates retain compositional variations in minor and trace elements that are consistent with intercumulus crystallization. Accessory mineralogy reflects crystallization of late-stage residual melt. Both lithologies (breccia and olivine cumulate) of the meteorite have very-low-Ti (VLT) major-element compositions, but with an unusual trace-element signature compared to most lunar VLT volcanic compositions, i.e., relative enrichment in light REE and large-ion-lithophile elements, and greater depletion in Eu than almost all other known lunar volcanic rocks. The calculated composition of the melt that was in equilibrium with pyroxene and plagioclase of the cumulate lithology exhibits a KREEP-like REE pattern, but at lower concentrations. Melt of a composition calculated to have been in equilibrium with the cumulate assemblage, plus excess olivine, yields a major-element composition that is similar to known green volcanic glasses. One volcanic glass type from Apollo 14 in particular, green glass B, type 1, has a very low Ti concentration and REE characteristics, including extremely low Eu concentration, that make it a candidate parent melt for the olivine-gabbro cumulate. We infer an origin for the parent melt of NWA773 volcanic components by assimilation of a trace-element-rich partial or residual melt by a magnesian, VLT magma deep in the lunar crust or in the mantle prior to transportation to the near-surface, accumulation of olivine and pyroxene in a shallow chamber, eruption onto a volcanic surface, and incorporation of components into local, predominantly volcanic regolith, prior to impact mixing of the volcanic terrain and related hypabyssal setting, and ejection from the surface of the Moon. Volcanic components such as these probably occur in the Oceanus Procellarum region near the site of origin of the green volcanic glasses found in the Apollo 14 regolith.     

Present condition of Mt. Elbrus volcano

The Freetown layered complex, located on the western coast of Sierra Leone, is a rift-related tholeiitic intrusion associated with the Jurassic (～193 Ma) opening of the Atlantic Ocean at midlatitude. The complex is ～ 60 km long, 14 km wide, and 7 km thick along a major E-W traverse extending from Waterloo to York. Gravity data and dips of laminations in the layered rocks suggest that the intrusive complex is lopolithic in shape, with some parts presently being submarine.

The exposed rocks consist of a rhythmically layered sequence of troctolite, olivine gabbro, gabbronorite, gabbro, and anorthosite. The complex has been divided into four zones delineated by (1) topographic expression, whereby the base of each zone forms a scarp, and the top forms dip slopes and strike valleys; and (2) cyclical repetition of rock types (Wells, 1962). A new detailed stratigraphic section along the Waterloo-York traverse is presented, in which Zone 3 is subdivided into an upper 2000-m-thick anorthosite-gabbro interval and a lower 1700-m-thick rhythmically layered subzone.

Inverted pigeonite first became a cumulus phase at the bottom of Zone 2, before disappearing near the middle of Zone 3 at the anorthosite-gabbro interval, only to reappear at the top of Zone 4 with cumulus titanomagnetite. Mineral compositions in the complex range from An₇₂ to An₇₂ plagioclase, Fo₅₆ to Fo₇₅ olivine, En_38.5 to En_44.8 augite, and En_54.9 to En_74.6 orthopyroxene. The compositions of plagioclase and olivine in Zone 2 vary irregularly, although the overall trend is toward reverse differentiation. By contrast, Zone 4 is characterized by a rapid decrease in Fo and An from the base of the zone upward, followed by an increase. Cryptic variation also is shown by the Ni content of olivine and Cr content of clinopyroxene.

The overall pattern of cryptic variation in the complex suggests continual leakage of fresh magma into the chamber, followed by oscillatory spikes in the rhythmically layered subzone of Zone 3, where major influxes of new magma occurred. The changes in mineral compositions and modal abundances as a function of stratigraphic height are the result of magma recharge, followed by mixing of new and evolved resident magmas in the Freetown magma chamber. This probably resulted in the expansion of the chamber and crystallization in situ without any discharge. The inferred crystallization sequence for each zone is different, reflecting different magma compositions and changes that occur in the magmas during crystallization. The alternative hypotheses that the Freetown Complex formed from a single parental magma, or that mineral layering was the result of the crystallization sequence Fe-Ti oxides→olivine→pyroxene→plagioclase, are not supported by the evidence.     

Thick chromitite of the Jacurici Complex (NE Craton São Francisco,Brazil): Cumulate chromite slurry in a conduit

The Jacurici Complex, located in the NE part of the São Francisco Craton, hosts the largest chromite deposit in Brazil. The mineralized intrusion is considered to be a single N-S elongated layered body, disrupted into many segments by subsequent deformation. The ore is hosted in a thick, massive layer. Two segments, Ipueira and Medrado, have been previously studied. We provide new geological information, and chromite composition results from the Monte Alegre Sul and Várzea do Macaco segments located farther north, and integrate these with previous results. The aim of this study is to determine and discuss the magma chamber process that could explain the formation of the thick chromitite layer. All segments exhibit similar stratigraphic successions with an ultramafic zone (250 m thick) hosting a 5–8 m thick main chromitite layer (MCL), and a mafic zone (40 m thick). The chromite composition of the MCL, Mg-numbers (0.48–0.72) and Cr-numbers (0.59–0.68), is similar to chromites from layered intrusions and other thick chromitites. Previous work concluded that the parental magma of the mineralized intrusion was very primitive based on olivine composition (up to Fo₉₃) and orthopyroxene composition (up to En₉₄) from harzburgite samples, and that it originated from an old subcontinental lithospheric mantle. We estimate that the melt from which the massive chromitite layer crystallized was similar to a boninite, or low siliceous high-Mg basalt, with a higher Fe/Mg ratio. The petrologic evidence from the mafic-ultramafic rocks suggests that a high volume of magma flowed through the sill, which acted as a dynamic conduit. Crustal contamination has previously been considered as the trigger for the chromite crystallization, based on isotope studies, as the more radiogenic signatures correlate with an increase in the volumetric percentage of amphibole (up to 20%). The abundant inclusions of hydrous silicate phases in the chromites from the massive ore suggest that the magma was hydrated during chromite crystallization. Fluids may have played an important role in the chromite formation and/or accumulation. However, the trigger for chromite crystallization remains debatable. The anomalous thickness of the chromitite is a difficult feature to explain. We suggest a combined model where chromite crystallized along the margins of the magma conduit, producing a semi-consolidated chromite slurry that slumped through the conduit forming a thick chromitite layer in the magma chamber where layered ultramafic rocks were previously formed. Subsequently, the conduit was obstructed and the resident magma fractionated to produce a more evolved composition.     

Igneous Petrology of the Synorogenic Fongen-Hyllingen Layered Basic Complex, South-Central Scandinavian Caledonides

The 160 km² Caledonian Fongen-Hyllingen complex is an extremelydifferentiated, layered, basic intrusion, synorogenically emplacedat 5–6 kb in the allochthonous Trondheim nappe complex,situated in the Trondheim region of Norway. A zone of gabbroic rocks without rythmic layering usually occursalong the margin and a supposed feeder to at least part of thecomplex is preserved. A wide variety of magmatic sedimentarystructures are present in the c. 10,000 m thick sequence ofrhythmically layered rocks which vary from olivine-picotitecumulates at the base to quartz-bearing ferrosyenites at thetop. Mineral compositions, fractionation trends, and the compositionof feeder rocks suggest a tholeiitic parent. Mineral compositions cover extreme ranges. Olivine varies fromFo_86·2 to Fo_0·2 with a hiatus between about Fo₇₁and Fo₆₁. Plagioclase ranges from An_79·5 to An_1·5,albite coexisting with orthoclase microperthite in the finaldifferentiates. Cumulus Ca-poor pyroxene (Wo_2.4En_66.8Fs_30.8-Wo_2·0En_17·0Fs_81·0)first shows sporadic inversion from pigeonite at the Fe-richcomposition of Fs₆₇ and the final Ca-poor pyroxenes are replacedby magmatic grunerite which reaches an Mg: Fe ratio of 12:88.Ca-rich pyroxenes (Wo_44·7En_43·8Fs_11·5-Wo_47·0En₀Fs_53·0)are highly calcic and have a slight Ca-minimum in the earlystages, unrelated to the disappearance of Ca-poor pyroxene.Calcic amphibole, a constant intercumulus phase in most of thecomplex, becomes a cumulus phase in the later stages and variesfrom titanian-pargasite to ferro-edenite. Magnetite and ilmenitejoin the cumulate assemblage at Fo₅₅ and ilmenite persists intothe final quartz-bearing ferrosyenite where it shows replacementby sphene. Apatite, biotite, zircon, quartz, K-feldspar andallanite join the final extreme differentiates in the namedsequence. The fractionation trend is, in many respects, transitionalbetween those typical of the tholeiitic and calc-alkaline series,and is interpreted as reflecting crystallization under moderate,increasing P_H2O. Cryptic layering shows several reversals to higher temperatureassemblages with increasing stratigraphic height. Successivereversals are to irregular compositions and measured in termsof olivine composition, can be up to about 30 mole per centFo. The minimum stratigraphic thickness to include the entirefractionation range is reduced to about 2200 m after ‘removal’of the compositional overlaps due to the reversals. Thus roughlythree-quarters of the present cumulate stratigraphic sequencerepresents magma replenishment. A mechanism involving the mixingof fresh magma batches with the residual, differentiated magmafrom the previous influx, is envisaged. The periodic influxof fresh magma took place into a chamber which was probablyclosed to the exit of material.     

Bulk rock composition and geochemistry of olivine-hosted melt inclusions in the Grey Porri Tuff and selected lavas of the Monte dei Porri volcano, Salina, Aeolian Islands, southern Italy

The Aeolian Islands are an arcuate chain of submarine seamounts and volcanic islands, lying just north of Sicily in southern Italy. The second largest of the islands, Salina, exhibits a wide range of compositional variation in its erupted products, from basaltic lavas to rhyolitic pumice. The Monte dei Porri eruptions occurred between 60 ka and 30 ka, following a period of approximately 60,000 years of repose. The bulk rock composition of the Monte dei Porri products range from basaltic-andesite scoria to andesitic pumice in the Grey Porri Tuff (GPT), with the Monte dei Porri lavas having basaltic-andesite compositions. The typical mineral assemblage of the GPT is calcic plagioclase, clinopyroxene (augite), olivine (Fo_72?84) and orthopyroxene (enstatite) ± amphibole and Ti-Fe oxides. The lava units show a similar mineral assemblage, but contain lower Fo olivines (Fo_57?78). The lava units also contain numerous glomerocrysts, including an unusual variety that contains quartz, K-feldspar and mica. Melt inclusions (MI) are ubiquitous in all mineral phases from all units of the Monte dei Porri eruptions; however, only data from olivine-hosted MI in the GPT are reported here. Compositions of MI in the GPT are typically basaltic (average SiO₂ of 49.8 wt %) in the pumices and basaltic-andesite (average SiO₂ of 55.6 wt %) in the scoriae and show a bimodal distribution in most compositional discrimination plots. The compositions of most of the MI in the scoriae overlap with bulk rock compositions of the lavas. Petrological and geochemical evidence suggest that mixing of one or more magmas and/or crustal assimilation played a role in the evolution of the Monte dei Porri magmatic system, especially the GPT. Analyses of the more evolved mineral phases are required to better constrain the evolution of the magma.     

西藏罗布莎蛇绿岩中不同产出的纯橄岩及成因探讨

罗布莎蛇绿岩中的纯橄岩有三种产出情况,除了与豆荚状铬铁矿伴生的薄壳状纯橄岩外,还有产在方辉橄榄岩底部被认为是堆晶岩的厚层状纯橄岩和方辉橄榄岩中的透镜状纯橄岩。厚层状纯橄岩约700～1000m厚,以橄榄石富镁(Fo93～95),单斜辉石低铝富镁(Al2O30.47%～0.85%,Mg#95～97),铬尖晶石高铬低镁(Cr#值平均77,Mg#平均51)为特征。该纯橄岩中的浸染状铬铁矿也是高铬低镁型,但Mg#值(平均59)高于厚层状纯橄岩的副矿物铬尖晶石。薄壳状纯橄岩与厚层状纯橄岩成分相近,其橄榄石Fo92～94,单斜辉石Al2O3<1%和Mg#95～97;铬尖晶石的Cr#值平均71,Mg#值平均52。与薄壳状纯橄岩伴生的块状铬铁矿为高镁高铬型,但Mg#值(平均68)相对更高些,Cr#值平均79。透镜状纯橄岩的特征是橄榄石Fo(91～92)和铬尖晶石Cr#(60左右)均低于前两类纯橄岩,但单斜辉石的Al2O3(1.41%～1.71%)则高于前两者。透镜状纯橄岩的矿物成分与方辉橄榄岩重叠,两者为渐变过渡关系。研究对比表明,罗布莎厚层状纯橄岩不同于经典的蛇绿岩的超镁铁质堆晶岩,认为将其成因解释为拉斑玄武质熔体与地幔橄榄岩的反应较为合理。透镜状纯橄岩与方辉橄榄岩存在成生联系,可能是地幔橄榄岩高度部分熔融的产物,或熔体和方辉橄榄岩在原位发生反应的产物;薄壳状纯橄岩成因与厚层状纯橄岩相同,但与其相伴的块状铬铁矿是否由拉斑玄武质熔体与方辉橄榄岩反应形成,值得商榷。     

Mineralogical variations in the Delakhari sill,Deccan trap intrusion,central India

The Delakhari sill (maximum thickness cf. 200 m) is the most extensive Deccan Trap instrusion which occurs in central India, between longitutdes 78°3835 to 78°2240 and latitudes 22°26 and 22°2230. Based on petrographic examination, the sill is divided, from bottom to top, into (1) the Lower Chilled Zone (LCZ), up to 8 m thick, marked by abundant interstitial glass and an overall fine grain size, (2) the Olivine-Rich Zone (ORZ), 27 m thick, enriched in olivine (relative to the other zones in the sill), (3) the Central Zone (CZ), 70 m thick, marked by depletion in olivine and overall coarse grain size, (4) the Upper Zone (UZ), 55 m thick, marked by the presence of two chemically and morphologically distinct olivine types and abundant interstitial granophyre, and (5) the Upper Chilled Zone (UCZ), 10–25m thick, marked by abundant interstitial glass.Compositions of the pyroxenes and olivines show an overall increase in Fe/Mg with crystallization, but extensive interzonal and intrazonal variations and overlaps exist. Olivine ranges from Fa₂₄ (ORZ) to Fa₉₅ (UZ). In the UZ and inner UCZ, an equant (Fa_44–50, called type-A olivine) and interstitial skeletal olivine (Fa_70–95, called type-B olivine) occur together. Compositions of the Ca-rich and Ca-poor pyroxenes fall in the range Wo₃₈En₃₄Fs₂₈ to Wo₃₃En₈Fs₅₉ and Wo₁₄En₄₁Fs₄₅ to Wo₁₆En₁₉Fs₆₅, respectively. Overall, the two pyroxene trends converge with Fe-enrichment except for one anomalous sample from the UZ which contains a Ca-rich (Wo₃₄En₈Fs₅₈) and a Ca-poor (Wo₁₀En₁₈Fs₇₂) pyroxene well within the Forbidden Zone of Smith (1972).Compositions of coexisting oxide minerals indicate that the sill crystallized at oxygen fugacities from 10^–10 atm (ORZ) to 10^–13 (UZ). The magma prior to intrusion appears to have been derived from a more primitive melt from which a considerable amount of olivine and plagioclase have fractionated out. A model of open, interrupted fractional crystallization in the sill is proposed to explain the compositional variations exhibited by the major mineral phases.A previous study (Crookshank 1936) concluded that the sill is actually a multiple intrusion and has given rise to the lowermost (flow I) and the topmost (flow III) lava flows in the neighboring area around Tamia (78°4015, 22°2035). The olivines of flows I and III have compositions Fo₈₇ and Fo₈₈ respectively, and are much more Mg-rich than the maximum Mg-rich olivine (Fo₇₆) of the Delakhari sill, refuting the possibility of the sill being the feeder of the lava flows I and III.Geosciences Department, University of Texas at Dallas Contribution No. 338     

The detailed mineralogy and significance of an Olivine-two pyroxene gabbro nodule from lanzarote,Canary Islands

A gabbro inclusion typical of the gabbroic xenolith suite in alkalic basalts on Lanzarote is composed of essentially four minerals. Olivine (5 vol.%) and plagioclase An₈₁ (60%) were first to crystallize. The olivine, Fo₇₆ with 0.02% CaO, was subsequently subjected to high-temperature oxidation followed by hydrolysis, resulting in its partial alteration to Fo₉₂ and Fe-oxide-hydroxide plus (free?) silica. Clinopyroxene (30%) Ca₄₃Mg₄₆Fe₁₁ has exsolved orthopyroxene Ca_1.6Mg_76.0Fe_22.4 with 2.10% A1₂O₃ in lamellae ∥ {100}. Orthopyroxene (5%) of the same composition also occurs as discrete crystals and petrographic and chemical criteria suggest that it formed by reaction of olivine with melt. The xenolith probably crystallized from a tholeiitic melt at a depth less than 9 km, i.e. above the Moho discontinuity under Lanzarote. The existence of basalts of olivine-tholeiitic chemistry on Lanzarote suggests a source for the gabbro nodules. Separation of calcic plagioclase from a tholeiitic melt may explain the relatively high alkali contents (Na₂O+ K₂O= 3.2 to 3.7%) of the Lanzarote olivine-tholeiitic basalts.     

Boninite primary magmas: Evidence from the Cape Vogel Peninsula,PNG

Boninites from Cape Vogel, PNG, are dominantly pyroxene-glass rocks, but many contain olivine, sometimes as refractory as Fo₉₄. We derive a parental magma for this suite (in equilibrium with Fo₉₄) which contains 20 wt.% MgO and is quartz-normative. This liquid is hydrous, and from petrographie evidence and whole rock H₂O⁺ values, we estimate it to contain 2–3 wt.% H₂O. These data suggest olivine fractionation and primary magmatic water are important in boninite genesis, but both are often obscured by later alteration. The derived parental magma has probably formed at 1,250–1,300° C and low pressures (< ?10kB) and is similar to those which gave rise to olivine-clinoenstatite phyric boninites from New Caledonia and from Howqua, Australia, and possibly to a proposed parental magma for the Bushveld Complex.     

Evolution of major mineral compositions and trace element abundances during fractional crystallization of a model lunar composition

The evolution of major mineral compositions and trace element abundances during fractional crystallization of a model lunar magma ocean have been calculated. A lunar bulk composition consistent with petrological constraints has been selected. Major mineral compositions have been calculated using published studies of olivine-melt, plagioclase-melt, and pyroxene-olivine equilibria. Trace element abundances have been calculated using experimentally-determined partition coefficients where possible. In the absence of experimental determinations, published partition coefficients obtained by analyzing phase separates from porphyritic volcanic rocks have been used. Trace elements studied are La, Sm, Eu, Lu, Rb, Sr( Eu²⁺), Ni, Co, and Cr.The first mineral to crystallize is olivine, which varies in composition from Fo₉₈ at the liquidus to Fo₉₅ at 50% solidification. Orthopyroxene crystallizes from 50 to 60% solidification with a restricted composition range of En₉₅-En₉₃. Plagioclase and Ca-rich clinopyroxene (X_Wo arbitrarily set equal to 0.5) co-crystallize during the final 40% solidification. Plagioclase changes in composition from An₉₇ to approximately An₉₃, while clinopyroxene evolves from En₄₆ to approximately En₄₀. The concomitant evolution of major element abundances in the melt is also discussed.The concentration of Ni in the melt decreases rapidly because solid-melt partition coefficients are significantly greater than unity at all stages of crystallization. The concentration of Cr in the melt increases slowly during olivine crystallization, then drops precipitously during the crystallization of orthopyroxene and clinopyroxene. The concentration of Co in the melt decreases slowly during olivine and orthopyroxene crystallization, after which it returns slowly to its initial concentration. Rubidium and Sr are not fractionated relative to one another until the onset of plagioclase crystallization. Ratios of Rb/Sr, normalized to their initial concentrations in the magma, do not rise above 10 until 95% of the magma has solidified. The ratios of Eu/Sm and La/Lu, normalized to their initial concentrations in the magma, remain essentially unfractionated until the onset of crystallization of clinopyroxene plus plagioclase, at which point the normalized La/Lu ratio increases to approximately 1.3 at 100% solidification and the normalized Eu/Sm ratio decreases to approximately 0.2 at 100% solidification.The model calculations are used to place approximate constraints on the bulk composition of the primitive Moon. Consideration of the effect on plagioclase composition of the activities of NaO_0.5 and SiO₂ in the melt suggests that the primitive Moon contained less than 0.4 wt % NaO_0.5 and approximately 42–43 wt % SiO₂. Concentrations of the REE in model lunar anorthosites are consistent with the returned samples. Concentrations of the REE in several model ‘highland basalts’ (considered to be representative of the average lunar terrae) are too low when compared with returned samples. Several possible explanations of this discrepancy are considered. The possible role of spinel in a twostage geochemical evolution of mare basalt liquids is discussed.     

Serpentinization at Burro Mountain,California

The Burro Mountain ultramafic complex, Monterey County, California, consists of dunites and peridotites which are partially or wholly serpentinized. Primary minerals in both rock types are olivine, enstatite, diopside, and picotite which upon alteration yield chrysotile, lizardite, brucite, magnetite, talc, tremolite, and carbonate. Electron microprobe analyses show that enstatite, En_85.8 to En_90.8, alters to “bastite” composed only of lizardite (5.0–12.0 weight percent FeO), whereas olivine, Fo_90.8 to Fo_91.6, forms lizardite+chrysotile+brucite with or without magnetite. The chrysotile ranges from 3.0 to 5.0 weight percent FeO, the brucite from 16.0 to 43.0 weight percent FeO. As Serpentinization proceeds, the alteration products are enriched in FeO relative to MgO. Serpentinization probably originates in a changing \(P_{O_2 }\)-T environment by two different reactions:

1. (a)
   Olivine+enstatite+H₂O+O₂?Mg, Fe⁺² chrysotile+Mg, Fe⁺³, Fe⁺² lizardite with or without magnetite.     
   
   

Elasticity of tetragonal end-member majorite and solid solutions in the system Mg4Si4O12-Mg3Al2Si3O12

 The adiabatic elastic moduli of polycrystalline En₅₀Py₅₀ and En₈₀Py₂₀ majorite-garnet solid solutions (where En=4MgSiO₃, Py=Mg₃Al₂Si₃O₁₂) and the end-member En₁₀₀ tetragonal majorite were determined at ambient conditions using Brillouin spectroscopy. The adiabatic bulk modulus, K, and shear modulus, μ, of En₅₀Py₅₀ were found to be K=173.1 (20) and μ=92.3 (10) GPa, and are indistinguishable from those of the end-member pyrope, Py₁₀₀. The moduli of the more majorite-rich samples are significantly lower and are virtually identical to each other (K=162.6(11) and μ=85.7(7) for En₈₀Py₂₀; K=166(5) and μ=88(2) for En₁₀₀). In combination with previously reported moduli for this system, we conclude that both K and μ are constant over the compositional range from Py₁₀₀ to a majorite content of about 70–80%, whereupon the moduli decrease substantially. For compositions ranging from En₈₀Py₂₀ to the end-member majorite, the moduli are also approximately independent of composition, but at a lower value. An alternative model with a continuous decrease in moduli with increasing majorite content cannot be excluded, within the uncertainties of existing measurements. The contrast in moduli between aluminous pyrope garnet and Al-free majorite are small compared with the modulus changes accompanying the pyroxene – majorite phase transformation. Received August 16, 1995 /Revised, accepted January 12, 1996     

Crystallization, melt inclusion, and redox history of a Martian meteorite: Olivine-phyric shergottite Larkman Nunatak 06319

The Larkman Nunatak (LAR) 06319 olivine-phyric shergottite is composed of zoned megacrysts of olivine (Fo_76-55 from core to rim), pyroxene (from core to rim En₇₀Fs₂₅Wo₅, En₅₀Fs₂₅Wo₂₅, and En₄₅Fs₄₅Wo₁₀), and Cr-rich spinel in a matrix of maskelynite (An₅₂Ab₄₅), pyroxene (En_30-40Fs_40-55Wo_10-25,), olivine (Fo₅₀), Fe-Ti oxides, sulfides, phosphates, Si-rich glass, and baddeleyite. LAR 06319 experienced equilibration shock pressures of 30-35 GPa based on the presence of localized shock melts, mechanical deformation of olivine and pyroxene, and complete transformation of plagioclase to maskelynite with no relict birefringence. The various phases and textures of this picritic basalt can be explained by closed system differentiation of a shergottitic melt. Recalculated parent melt compositions obtained from melt inclusions located in the core of the olivine megacrysts (Fo_>72) resemble those of other shergottite parent melts and whole-rock compositions, albeit with a lower Ca content. These compositions were used in the MELTS software to reproduce the crystallization sequence. Four types of spinel and two types of ilmenite reflect changes in oxygen fugacity during igneous differentiation. Detailed oxybarometry using olivine-pyroxene-spinel and ilmenite-titanomagnetite assemblages indicates initial crystallization of the megacrysts at 2 log units below the Fayalite-Magnetite-Quartz buffer (FMQ - 2), followed by crystallization of the groundmass over a range of FMQ - 1 to FMQ + 0.3. Variation is nearly continuous throughout the differentiation sequence.LAR 06319 is the first member of the enriched shergottite subgroup whose bulk composition, and that of melt inclusions in its most primitive olivines, approximates that of the parental melt. The study of this picritic basalt indicates that oxidation of more than two log units of FMQ can occur during magmatic fractional crystallization and ascent. Some part of the wide range of oxygen fugacities recorded in shergottites may consequently be due to this process. The relatively reduced conditions at the beginning of the crystallization sequence of LAR 06319 may imply that the enriched shergottite mantle reservoir is slightly more reduced than previously thought. As a result, the total range of Martian mantle oxygen fugacities is probably limited to FMQ − 4 to − 2. This narrow range could have been generated during the slow crystallization of a magma ocean, a process favored to explain the origin of shergottite mantle reservoirs.     

Intrinsic oxygen fugacities of diogenites and mesosiderite clasts

Oxygen fugacities of diogenite and mesosiderite clast material were measured with the double ZrO₂ cell technique between 800° and 1150°C. The samples were taken from large clasts in the diogenites Johnstown (En₇₃) and Tatahouine (En₇₅), and the mesosiderites Estherville (En₈₁), West Point (Fo₈₈) and Emery (En₆₈). Fugacity values for all except Emery plot near the wüstite-iron buffer curve and are interpreted as indicating similar source regions and environments of crystallization for the two suites. Emery orthopyroxene records a lower fugacity, close to the fayalite-quartz-iron buffer curve, probably as a result of equilibration with the mesosiderite matrix assemblage. The similarity of redox conditions experienced by mesosiderite orthopyroxenite and diogenites is not sufficient to require a single parent body and, if the common achondrites were derived from Vesta, mesosiderites probably came from a different body.     

Vermicular orthopyroxene-magnetite symplectites from the Wateranga layered mafic intrusion,Queensland, Australia

Orthopyroxene-magnetite intergrowths (symplectites), partly or completely surrounding olivine, are described from the Wateranga layered mafic intrusion, Queensland, Australia. The texture occurs in unmetamorphosed plagioclase-rich norites, olivine gabbros and troctolites in which the primary minerals are olivine (Fo_63–69) orthopyroxene (En_66–72), clinopyroxene (Wo₄₂En₄₂Fs₁₆), plagioclase (An_49–65), hornblende, ilmenite, magnetite and sulphides. Symplectites range from incipient fine grained developments around corroded olivine grains to intricately formed pseudomorphs after olivine and slow a consistent orthopyroxene/magnetite ratio. Orthopyroxene in symplectites is commonly in optical continuity with surrounding magnetite-free orthopyroxene rims. Later intercumulus hornblended has replaced orthopyroxene. There is marked chemical similarity between primary and simplectite, orthopyroxenes and magnetites. Textures similar to those described here are considered elsewhere to have formed at a late magmatic stage or by solid state reactions involving subsolidus oxidation of olivine. In the Wateranga intrusion textural relations, the chemical similarity between primary and symplectite phases, and the consistent volume proportions of magnetite and orthopyroxene in the intergrowths suggest that they developed during late magmatic crystallization.     

Growth of multilayered polycrystalline reaction rims in the MgO–SiO<Subscript>2</Subscript> system,part II: modelling

Part I of this contribution (Gardés et al. in Contrib Mineral Petrol, 2010) reported time- and temperature-dependent experimental growth of polycrystalline forsterite-enstatite double layers between single crystals of periclase and quartz, and enstatite single layers between forsterite and quartz. Both double and single layers displayed growth rates decreasing with time and pronounced grain coarsening. Here, a model is presented for the growth of the layers that couples grain boundary diffusion and grain coarsening to interpret the drop of the growth rates. It results that the growth of the layers is such that (Δx)² ∝ t ^1−1/n , where Δx is the layer thickness and n the grain coarsening exponent, as experimentally observed. It is shown that component transport occurs mainly by grain boundary diffusion and that the contribution of volume diffusion is negligible. Assuming a value of 1 nm for the effective grain boundary width, the following Arrhenius laws for MgO grain boundary diffusion are derived: log D _gb,0^Fo (m²/s) = −2.71 ± 1.03 and E _gb^Fo = 329 ± 30 kJ/mol in forsterite and log D _gb,0^En (m²/s) = 0.13 ± 1.31 and E _gb^En = 417 ± 38 kJ/mol in enstatite. The different activation energies are responsible for the changes in the enstatite/forsterite thickness ratio with varying temperature. We show that significant biases are introduced if grain boundary diffusion-controlled rim growth is modelled assuming constant bulk diffusivities so that differences in activation energies of more than 100 kJ/mol may arise. It is thus important to consider grain coarsening when modelling layered reaction zones because they are usually polycrystalline and controlled by grain boundary transport.     

Development of orthopyroxene-Fe/Mg ferrite symplectites by continuous olivine oxidation

The development of orthopyroxene-Fe/Mg ferrite symplectites associated with olivine is discussed with respect to the chemical reactions by which they form. Previously proposed reactions are presented graphically and the differences between them are reviewed. With the exception of exsolution, these are all discontinuous reactions in the sense that olivine is replaced by the two-phase symplectite assemblage.Olivine-hosted symplectites developed in the margins of lherzolite xenoliths from Kauai, Hawaii, demonstrate a reaction mechanism which has not been previously documented from natural samples. Original Fo₉₀ olivine in these samples oxidized to a new assemblage consisting of orthopyroxene (En_92–95)-Fe/Mg ferrite (Mf_35–50) symplectites developed within more magnesian olivine (Fo_92–96) hosts. Thus, by this mechanism, olivine of a different composition persists as part of a final three-phase assemblage. As oxidation advanced, the compositions of all three product phases became continuously more magnesian and the stoichiometric coefficients of the orthopyroxene and Fe/Mg ferrite continuously increased, whereas those of the product olivine decreased in the mass-balance equations. These characteristics demonstrate that the reaction was controlled by oxygen diffusion into the xenoliths from the highly oxidized alkali picrite melt in which they were entrained. Thermodynamic calculations suggest that a gradient in oxygen fugacity of 10^0.9 bars existed across the xenolith rims and resulted in compositional gradients of 4 mol% fayalite and ferrosilite and 15 mol% magnetite.     

Mineralogy and partial melt textures within an ultramafic-mafic body,Greece

Ultramafic-mafic rocks from Makrirrakhi, Central Greece exhibit features of an original ophiolite sequence which contains depleted mantle material, ultramafic containing partial melt textures and possibly the mafic pluton which resulted from the coalescing of these partial melt segregations. Considerable mineralogical variation exists: unzoned olivine crystals range in composition from Fo_78–84 (mafics) to Fo_88–92 (ultramafics), plagioclases An_64–79 (mafics) to An_80–90 (ultramafics) and spinel varies from a chromian spinel (ultramafics) to a more aluminous-titaniferous spinel (mafics). Pyroxenes from the ultramafics display a limited range: En_89–92 Fs_9–8 Wo_0–2 (orthopyroxene) and En_48–54 Fs_1–10 Wo_38–50 (clinopyroxene). Mafic rocks display a greater range being richer in ferrosilite En_36–65 Fs_3–20 Wo_33–51. Pyroxenes from within the partial melt segregations have chemical affinities with those from the gabbrotroctolite series. A model of partial melt within the upper mantle, and, a set of criteria to distinguish partial melt textures from cumulate textures, are developed from analytical data and textural evidence.     

Seawater-peridotite interaction at 300°C and 500 bars: implications for the origin of oceanic serpentinites

An experiment has been performed reacting seawater with fresh peridotite (80% olivine, Fo₉₀ and ～- 15% enstatitic orthopyroxene En₉₅ and minor clinopyroxene and spinel) at 300°C, 500 bars and water/rock mass ratio of 20. The duration of the experiment was approximately 1500 hr.Seawater chemistry was appreciably modified during the experiment. Mg, Ca, Sr, SO₄ and H₂O were removed, while H₂S_(aq), Fe, Mn and Zn were added. H₂S_(aq) resulted from the inorganic reduction of seawater SO₄. pH was initially acid (2.8), but then rose slowly to a value of 5.2. The aqueous concentrations of Na, K, Cl and boron (B) changed little from that in seawater prior to reaction. However, as the solution was cooled to room temperature at the end of the experiment, the B concentration decreased. This suggests that the B content of oceanic serpentinites may be the result of retrograde reactions between a previously serpentinized body and ‘cold’ seawater.The primary minerals in the peridotite were replaced to varying degrees by serpentine (lizardite), magnetite. Mg-hydroxysulfate, anhydrite and possibly pyrite and sphalerite. Mg-hydroxysulfate and much anhydrite dissolved on quench.The alteration mineral assemblage generated during this experiment is consistent with that predicted from equilibrium phase relations and is similar in chemical composition, mineralogy and paragenesis to that reported for oceanic serpentinites.