U–Pb SHRIMP monazite ages of the giant Morro Velho and Cuiabá gold deposits, Rio das Velhas greenstone belt, Quadrilátero Ferrífero, Minas Gerais, Brazil

U–Pb SHRIMP results of 2672 ± 14 Ma obtained on hydrothermal monazite crystals, from ore samples of the giant Morro Velho and Cuiabá Archean orogenic deposits, represent the first reliable and precise age of gold mineralization associated with the Rio das Velhas greenstone belt evolution, in the Quadrilátero Ferrífero, Brazil. In the basal Nova Lima Group, of the Rio das Velhas greenstone belt, felsic volcanic and volcaniclastic rocks have been dated between 2792 ± 11 and 2751 ± 9 Ma, coeval with the intrusion of syn-tectonic tonalite and granodiorite plutons, and also with the metamorphic overprint of older tonalite–trondhjemite–granodiorite crust. Since cratonization and stable-shelf sedimentation followed intrusion of Neoarchean granites at 2612 + 3/− 2 Ma, it is clear that like other granite–greenstone terranes in the world, gold mineralization is constrained to the latest stages of greenstone evolution.     

The Archean BIF-hosted Cuiabá Gold deposit, Quadrilátero Ferrífero, Minas Gerais, Brazil

The Cuiabá Gold Deposit is located in the northern part of the Quadrilátero Ferrífero, Minas Gerais State, Brazil. The region constitutes an Archean granite–greenstone terrane composed of a basement complex (ca. 3.2 Ga), the Rio das Velhas Supergroup greenstone sequence, and related granitoids (3.0–2.7 Ga), which are overlain by the Proterozoic supracrustal sequences of the Minas (< 2.6–2.1  Ga) and Espinhaço (1.7 Ga) supergroups.The stratigraphy of the Cuiabá area is part of the Nova Lima Group, which forms the lower part of the Rio das Velhas Supergroup. The lithological succession of the mine area comprises, from bottom to top, lower mafic metavolcanics intercalated with carbonaceous metasedimentary rocks, the gold-bearing Cuiabá-Banded Iron Formation (BIF), upper mafic metavolcanics and volcanoclastics and metasedimentary rocks. The metamorphism reached the greenschist facies. Tectonic structures of the deposit area are genetically related to deformation phases D₁, D₂, D₃, which took place under crustal compression representing one progressive deformational event (E_n).The bulk of the economic-grade gold mineralization is related to six main ore shoots, contained within the Cuiabá BIF horizon, which range in thickness between 1 and 6 m. The BIF-hosted gold orebodies (> 4 ppm Au) represent sulfide-rich segments of the Cuiabá BIF, which grade laterally into non-economic mineralized or barren iron formation. Transitions from sulfide-rich to sulfide-poor BIF are indicated by decreasing gold grades from over 60 ppm to values below the fire assay detection limit in sulfide-poor portions. The deposit is “gold-only”, and shows a characteristic association of Au with Ag, As, Sb and low base-metal contents. The gold is fine grained (up to 60 μm), and is generally associated with sulfide layers, occurring as inclusions, in fractures or along grain boundaries of pyrite, the predominant sulfide mineral (> 90 vol.%). Gold is characterized by an average fineness of 0.840 and a large range of fineness (0.759 to 0.941).The country rocks to the mineralized BIF show strong sericite, carbonate and chlorite alteration, typical of greenschist facies metamorphic conditions. Textures observed on microscopic to mine scales indicate that the mineralized Cuiabá BIF is the result of sulfidation involving pervasive replacement of Fe-carbonates (siderite–ankerite) by Fe-sulfides. Gold mineralization at Cuiabá shows various features reported for Archean gold–lode deposits including the: (1) association of gold mineralization with Fe-rich host rocks; (2) strong structural control of the gold orebodies, showing remarkable down-plunge continuity (> 3 km) relative to strike length and width (up to 20 m); (3) epigenetic nature of the mineralization, with sulfidation as the major wall–rock alteration and directly associated with gold deposition; (4) geochemical signature, with mineralization showing consistent metal associations (Au–Ag–As–Sb and low base metal), which is compatible with metamorphic fluids.     

Geochronological framework of the Quadrilátero Ferrífero, with emphasis on the age of gold mineralization hosted in Archean greenstone belts

Archean terrains of the Quadrilátero Ferrífero comprise a greenstone belt association surrounded by granitoid–gneiss complexes, mainly composed of banded TTG gneisses whose igneous protoliths are older than 2900 Ma. This early continental crust was affected by three granitic magmatic episodes during the Neoarchean: ca. 2780 to 2760 Ma; 2720 to 2700 Ma; and 2600 Ma. Dating of felsic volcanic and volcaniclastic rocks defines a felsic magmatic event within the greenstone belt association around 2772 Ma, contemporaneous with emplacement of several of the granitic plutons and constrains a major magmatic and tectonic event in the Quadrilátero Ferrífero. Lead isotopic studies of lode–gold deposits indicate that the main mineralization episode occurred at about 2800 to 2700 Ma.Proterozoic evolution of the Quadrilátero Ferrífero comprises deposition of a continental-margin succession hosting thick, Lake Superior-type banded iron formations, at ca. 2500 to 2400 Ma, followed by deposition of syn-orogenic successions after 2120 Ma. The latter is related to the Transamazonian Orogeny. The western part of the Quadrilátero Ferrífero was also affected by the Brasiliano Orogeny (600 to 560 Ma).     

U–Pb SHRIMP monazite ages of the giant Morro Velho and Cuiabá gold deposits,Rio das Velhas greenstone belt,Quadrilátero Ferrífero,Minas Gerais,Brazil

U–Pb SHRIMP results of 2672 ± 14 Ma obtained on hydrothermal monazite crystals, from ore samples of the giant Morro Velho and Cuiabá Archean orogenic deposits, represent the first reliable and precise age of gold mineralization associated with the Rio das Velhas greenstone belt evolution, in the Quadrilátero Ferrífero, Brazil. In the basal Nova Lima Group, of the Rio das Velhas greenstone belt, felsic volcanic and volcaniclastic rocks have been dated between 2792 ± 11 and 2751 ± 9 Ma, coeval with the intrusion of syn-tectonic tonalite and granodiorite plutons, and also with the metamorphic overprint of older tonalite–trondhjemite–granodiorite crust. Since cratonization and stable-shelf sedimentation followed intrusion of Neoarchean granites at 2612 + 3/− 2 Ma, it is clear that like other granite–greenstone terranes in the world, gold mineralization is constrained to the latest stages of greenstone evolution.     

Lithofacies associations and structural evolution of the Archean Rio das Velhas greenstone belt, Quadrilátero Ferrífero, Brazil: A review of the setting of gold deposits

The Rio das Velhas greenstone belt is located in the Quadrilátero Ferrífero region, in the southern extremity of the São Francisco Craton, central-southern part of the State of Minas Gerais, SE Brazil. The metavolcano–sedimentary rocks of the Rio das Velhas Supergroup in this region are subdivided into the Nova Lima and Maquiné Groups. The former occurs at the base of the sequence, and contains the major Au deposits of the region. New geochronological data, along with a review of geochemical data for volcanic and sedimentary rocks, suggest at least two generations of greenstone belts, dated at 2900 and 2780 Ma. Seven lithofacies associations are identified, from bottom to top, encompassing (1) mafic–ultramafic volcanic; (2) volcano–chemical–sedimentary; (3) clastic–chemical–sedimentary, (4) volcaniclastic association with four lithofacies: monomictic and polymictic breccias, conglomerate–graywacke, graywacke–sandstone, graywacke–argillite; (5) resedimented association, including three sequences of graywacke–argillite, in the north and eastern, at greenschist facies and in the south, at amphibolite metamorphic facies; (6) coastal association with four lithofacies: sandstone with medium- to large-scale cross-bedding, sandstone with ripple marks, sandstone with herringbone cross-bedding, sandstone–siltstone; (7) non-marine association with the lithofacies: conglomerate–sandstone, coarse-grained sandstone, fine- to medium-grained sandstone. Four generations of structures are recognized: the first and second are Archean and compressional, driven from NNE to SSW; the third is extensional and attributed to the Paleoproterozoic Transamazonian Orogenic Cycle; and the fourth is compressional, driven from E to W, is related to the Neoproterozoic Brasiliano Orogenic Cycle. Gold deposits in the Rio das Velhas greenstone belt are structurally controlled and occur associated with hydrothermal alterations along Archean thrust shear zones of the second generation of structures.Sedimentation occurred during four episodes. Cycle 1 is interpreted to have occurred between 2800 and 2780 Ma, based on the ages of the mafic and felsic volcanism, and comprises predominantly chemical sedimentary rocks intercalated with mafic–ultramafic volcanic flows. It includes the volcano–chemical–sedimentary lithofacies association and part of the mafic–ultramafic volcanic association. The cycle is related to the initial extensional stage of the greenstone belt formation, with the deposition of sediments contemporaneous with volcanic flows that formed the submarine mafic plains. Cycle 2 encompasses the clastic–chemical–sedimentary association and distal turbidites of the resedimented association, in the eastern sector of the Quadrilátero Ferrífero. It was deposited in the initial stages of the felsic volcanism. Cycle 2 includes the coastal and resedimented associations in the southern sector, in advanced stages of subduction. In this southern sedimentary cycle it is also possible to recognize a stable shelf environment. Following the felsic volcanism, Cycle 3 comprises sedimentary rocks of the volcaniclastic and resedimented lithofacies associations, largely in the northern sector of the area. The characteristics of both associations indicate a submarine fan environment transitional to non-marine successions related to felsic volcanic edifices and related to the formation of island arcs. Cycle 4 is made up of clastic sedimentary rocks belonging to the non-marine lithofacies association. They are interpreted as braided plain and alluvial fan deposits in a retroarc foreland basin with the supply of debris from the previous cycles.     

The geology of the Morro Velho gold deposit in the Archean Rio das Velhas greenstone belt, Quadrilátero Ferrífero, Brazil

The Morro Velho gold deposit, Quadrilátero Ferrífero region, Minas Gerais, Brazil, is hosted by rocks at the base of the Archean Rio das Velhas greenstone belt. The deposit occurs within a thick carbonaceous phyllite package, containing intercalations of felsic and intermediate volcaniclastic rocks and dolomites. Considering the temporal and spatial association of the deposit with the Rio das Velhas orogeny, and location in close proximity to a major NNW-trending fault zone, it can be classified as an orogenic gold deposit. Hydrothermal activity was characterized by intense enrichment in alteration zones of carbonates, sulfides, chlorite, white mica±biotite, albite and quartz, as described in other Archean lode-type gold ores. Two types of ore occur in the deposit: dark gray quartz veins and sulfide-rich gold orebodies. The sulfide-rich orebodies range from disseminated concentrations of sulfide minerals to massive sulfide bodies. The sulfide assemblage comprises (by volume), on average, 74% pyrrhotite, 17% arsenopyrite, 8% pyrite and 1% chalcopyrite. The orebodies have a long axis parallel to the local stretching lineation, with continuity down the plunge of fold axis for at least 4.8 km. The group of rocks hosting the Morro Velho gold mineralization is locally referred to as lapa seca. These were isoclinally folded and metamorphosed prior to gold mineralization. The lapa seca and the orebodies it hosts are distributed in five main tight folds related to F1 (the best examples are the X, Main and South orebodies, in level 25), which are disrupted by NE- to E-striking shear zones. Textural features indicate that the sulfide mineralization postdated regional peak metamorphism, and that the massive sulfide ore has subsequently been neither metamorphosed nor deformed. Lead isotope ratios indicate a model age of 2.82 ± 0.05 Ga for both sulfide and gold mineralization. The lapa seca are interpreted as the results of a pre-gold alteration process and may be divided into carbonatic, micaceous and quartzose types. The carbonatic lapa seca is subdivided into gray and brown subtypes. Non-mineralized, gray carbonatic lapa seca forms the hanging wall to the orebodies, and is interpreted as the product of extreme CO₂ metasomatism during hydrothermal alteration. This dolomitic lapa seca ranges in composition from relatively pure limestone and dolomite to silty limestone and dolomite. The brown carbonatic and micaceous lapa secas are the host rocks to gold. These units are interpreted to correspond to the sheared and hydrothermal products of metamorphosed volcaniclastic and/or volcanic rocks of varying composition from dacitic to andesitic, forming various types of schists and phyllites. The high-grade, massive sulfide orebodies occur at the base of the gray carbonatic lapa seca. Both disseminated mineralization and quartz veins are hosted by micaceous lapa seca. The data are consistent with a model of epigenetic mineralization for the lapa seca, from a hydrothermal fluid derived in part from the Archean basement or older crust material.     

Geochemistry of a sedimentary lateritic kaolin deposit in Quadrilátero Ferrífero, Brazil

The present study deals with the mineralogy and geochemistry of the clayey facies of the Água Limpa kaolin deposit, situated in the Moeda Syncline, Quadrilátero Ferrífero, Minas Gerais, Brazil. Kaolinite, quartz, oxides and iron hydroxides (hematite and goethite) represent the mineral assembly of the five facies of the deposit. White mica, rutile, anatase and gibbsite are heterogeneously distributed along the profile. Despite the variable behavior of the chemical elements along the profile, the geochemical patterns for major and rare earth elements enable to define the filiations generated by the laterization process that affected the sediments.     

An epigenetic origin for the Passagem de Mariana gold deposit, Quadrilátero Ferrífero, Minas Gerais, Brazil

The gold–tourmaline quartz–vein deposit of Passagem de Mariana, in the southeastern part of the Quadrilátero Ferrífero, produced more than 60 tonne of gold, from the end of the 17th Century until 1954. The mine has not operated since 1985. Orebodies are veins composed of white quartz (> 60 vol.%), carbonate (ankerite), tourmaline, sericite and sulfides. Tourmaline (dravite), up to 10 vol.% of the vein, occurs as subhedral, coarse, commonly zoned crystals, and is concentrated along vein boundaries and on the edges of host rock inclusions in the veins. Tourmaline is present in all rock types in the mine, but the chemical composition of the host rocks determinates the intensity of tourmalinization, with the alteration being greater in sericitic phyllites, graphite–sericite phyllites, and calcareous rocks. The most abundant sulfide is arsenopyrite, which is normally associated with pyrite and pyrrhotite. Minor amounts of chalcopyrite, galena, löllingite, berthierite, and maldonite are present throughout the deposit. Sulfides are concentrated at veins boundary or are dispersed in the veins. Arsenopyrite is associated, most commonly, with calcareous rocks, and graphite–sericite phyllite. Pyrrhotite is usually found at the base of itabirites. Gold abundance is directly proportional to sulfide concentration. Hydrothermal alteration associated with the veins includes silicification, tourmalinization, and sulfidation. The mineralized zone is a shear zone associated with a bedding-parallel thrust fault that juxtaposes the itabirite (Lower Proterozoic Minas Supergroup) over other units. This shear zone/thrust fault extends for tens of km beyond the Passagem mine and hosts numerous gold deposits. The richest orebodies are along the itabirite footwall contact and within the graphite–sericite phyllite (Main orebody). Although many lithologic units were mineralized the graphite–sericite phyllite appears to have been most favorable for gold deposition.The area underwent three phases of deformation, D₁, D₂ and D₃. Mineral assemblages indicate upper-greenschist to lower-amphibolite conditions of regional metamorphism. Retrograde metamorphism, characterized by chloritization of biotite and chloritization and biotitization of garnet, developed locally. The gold-bearing veins crosscut the main foliation and lithologic contacts at low angle and occur within, or are in contact with, all lithotypes. Field and laboratory data indicate that gold mineralization at Passagem de Mariana is epigenetic. Gold deposition occurred after the peak of metamorphism, within the late- to post-D₂ period of deformation, which is correlated with second set of structures of Trasamazonian age of Alkmim and Marshak [Alkmim, F.F., Marshak, S., 1998. Transamazonian Orogeny in the Southern São Francisco Craton Region, Minas Gerais, Brazil: evidence for Paleoproterozoic collision and collapse in the Quadrilátero Ferrífero. Precambrian Research 90, 29-58.], indicating that the gold mineralization occurred between 2.124 and 2.04 Ga. We choose to regard Passagem de Marina as an orogenic gold deposit as defined by Groves et al. [Groves, D. I., Goldfarb, R.J., Gebre-Mariam, M., Hagemann, S.G., Robert, F., 1998. Orogenic gold deposits: A proposed classification in the context of their crustal distribution and relationship to other gold deposit types. Ore Geology Reviews 13, 7-27.], i.e., an epigenetic, structurally-hosted lode–gold vein system in a deformed metamorphic terrane.     

Nature and origin of the BIF-hosted São Bento gold deposit, Quadrilátero Ferrífero, Brazil, with special emphasis on structural controls

The orogenic banded iron formation (BIF)-hosted Au mineralization at São Bento is a structurally-controlled, hydrothermal deposit hosted by Archean rocks of the Rio das Velhas greenstone belt, Quadrilátero Ferrífero region, Brazil. The deposit has reserves of 14.3 t Au and historical (underground) production of 44.6 t Au between 1987 and 2001. The oxide-facies São Bento BIF is mineralized at its lower portion, where in contact with carbonaceous, pelitic schists, particularly in the proximity of sulfide-bearing quartz veins. Shear-related Au deposition is associated with the pervasive, hydrothermal sulfidation (mainly arsenopyrite) of the Fe-rich bands of the São Bento BIF. Auriferous, sulfide- and quartz-rich zones represent proximal alteration zones. They are enveloped by ankerite-dominated haloes, which reflect progressive substitution of siderite and magnetite within the BIF by ankerite and pyrrhotite, respectively. The São Bento BIF was intensely and extensively deformed, first into open, upright folds that evolved into tight, asymmetric, isoclinal folds. The inverse limb of these folds attenuated and gave way to sheath folds and the establishment of ductile thrusts. Mineralized horizons at São Bento result from early structural modifications imposed by major transcurrent and thrusts faults, comprising the Conceição, Barão de Cocais and São Bento shear zones. Dextral movement on the SW–NE-directed Conceição shear zone may have generated splays at a compressional side-stepping zone, such as the São Bento shear zone, which is the structural locus for the São Bento gold mineralization. Relaxation of the Conceição shear zone under more brittle conditions resulted in the development of dilatational zones where gold–sulfide–quartz veins formed. These structures are considered to have been generated in the Archean. Geochronological data are scarce, with Pb–Pb analyses of refractory arsenopyrite and pyrite from bedded and remobilized ore plotting on a single-stage growth curve at 2.65 Ga. A later compressional, ductile deformation of unknown age overprinted, rotated and flattened the original, N60E-directed structure of the whole rock succession, with development of planar and linear fabrics that appear similar to Proterozoic-aged structures. Fluid inclusion studies indicate low salinity, aqueous fluids, with or without CO₂ and/or CH₄, with extremely variable CO₂/CH₄ ratios, of probable metamorphic origin. Fluid evolution shows a paragenetic decrease in the carbonic phase from 10–15% to 5%, and increase in the H₂O/(CO₂ + CH₄) and CO₂/CH₄ ratios, suggesting important interaction with carbonaceous sediment. Trapping conditions indicate a temperature of 300 °C at 3.2 kbar.     

Structural control of Au–Pd mineralization (Jacutinga): An example from the Cauê Mine, Quadrilátero Ferrífero, Brazil

Precambrian banded iron formations (BIFs) in the Quadrilátero Ferrífero host a special kind of Au–Pd mineralization known as Jacutinga. The main orebodies are hosted within the Cauê Syncline, a SW-verging fold that involves Paleoproterozoic metasedimentary rocks in the Itabira District, a regional synclinorium with BIFs in the core of synclinal folds in the northeastern part of Quadrilatéro Ferrífero, Minas Gerais. Structural analysis reveals two important features of the district: the polydeformed character of the rocks and the importance of brittle structures in the control of the orebodies. Two deformational events are recognized in this area. The first event developed the main foliation, S1, that is the enveloping surface of the Cauê Syncline. The second event is better defined in the northern boundary of the structure where it is represented by a right-lateral wrench fault zone that has developed a foliation, S2, that truncates S1. This wrench fault was also responsible for the development of a system of fractures (Frm) that host the Au–Pd mineralization. The auriferous bodies of Cauê Syncline (Y, X, Área Central, Aba Norte, Noroeste and Aba Leste/Aba Leste Inferior) were generated during this second event. Shear fractures (R, R′ and P) and tension fractures (T) developed in response to the wrench fault system under brittle conditions. The best-developed, and most commonly mineralized fractures are R and T in all auriferous bodies. Elsewhere, the best mineralization occurs in the contacts of hematite bodies (soft/hard) and intrusive rocks with fractured itabirites. Other mineralization (Aba Norte, Área Central and X) is hosted on the contacts of other units.A system of fractures, as well as their intersections, thus represents the structural control on Jacutinga bodies and is responsible for the geometry of the orebodies. Of importance, there is no control by mineral/stretching lineations, fold axes and other ductile structure on the geometry and plunge of the orebodies.     

The copper–gold and gold deposits of the Neoproterozoic Mara Rosa magmatic arc, central Brazil

Mineral exploration in the Neoproterozoic Goiás Magmatic Arc, central Brazil, dates back to the beginning of the 1970s. The Goiás Magmatic Arc extends for more than 1000 km in the western and northern parts of Goiás, into Tocantins, and disappears under the Phanerozoic Parnaíba Basin. Two main areas of Neoproterozoic juvenile crust, the Arenópolis and the Mara Rosa arcs, are identified. They lie in the southern and northern sectors of the Goiás Arc, respectively, and are relatively well studied.The Goiás Magmatic Arc dominantly comprises tonalitic/dioritic orthogneisses and narrow NNE-striking volcano-sedimentary belts. Recent U–Pb zircon data indicate crystallization of the tonalite protoliths in two main episodes: the older between ca. 890 and 790 Ma and the younger at 670–600 Ma. Nd isotopic data indicate the very primitive nature of the original magmas, with T_DM model ages mostly within the interval between 0.9 and 1.0 Ga and _Nd(T) values between +3.0 and +4.6. In the Chapada–Mara Rosa area, the supracrustal rocks form three individual NNE belts, known as the eastern, central and western belts, separated from each other by metatonalites/metadiorites.Gold and Cu–Au deposits of the Mara Rosa area occur in four main associations: (i) Au–Ag–Ba (e.g., Zacarias), which are interpreted as stratiform, disseminated volcanogenic deposits, (ii) Cu–Au (e.g., Chapada) which has been interpreted either as volcanogenic or as a porphyry-type deposit, (iii) Au-only deposits (e.g., Posse), interpreted as an epigenetic disseminated deposit controlled by a mesozonal shear zone and (iv) Au–Cu–Bi (e.g., the Mundinho occurrence), which are considered as vein-type deposits controlled by magnetite-rich diorites.The gold and Cu–Au deposits located within the Goiás Magmatic Arc can be spatially and temporally related to the magmatic evolution of a collisional belt or, in other words, to an orogenic gold deposit model. These models are based on the continuous evolution of collisional plates, which can be subdivided into four stages with distinct magmatic characteristics: (i) subduction stage, (ii) syntectonic collisional magmatism stage, (iii) post-tectonic collisional magmatism stage and (iv) post-orogenic extension stage.     

Santa Bárbara Formation (Early Paleozoic, Caçapava do Sul, southern Brazil): Petrographic and Sm–Nd isotopic provenance parameters

Integrated petrographic and Sm–Nd isotopic data were applied in order to constrain the provenance of the Early Paleozoic Santa Bárbara Formation, Sul-rio-grandense Shield, southern Brazil. This unit comprises continental sandstones, conglomerates and siltstones deposited under semi-arid climate in a rift or pull-apart basin. Samples were collected within a stratigraphic framework composed of three sequences, in which the two basal ones present northeastwards paleoflow, and the third one marks the inversion of basin filling. Samples from sequence I show, in the south, a strong influence of intermediate volcanic (Hilário Formation) sources, and a significant increase in quartz and metamorphic fragments upsection. In the northern deposits, there is a possible influence of juvenile units (Cambaí/Vacacaí), and a more significant input of Paleoproterozoic-sourced sedimentary rocks (e.g. Maricá Formation) upsection. Samples collected from the topmost deposits of sequence II present a clear increase in the amount of volcanic fragments (mostly acidic), reflecting denudation of the “Caçapava high”. Data obtained in sequence III (Pedra do Segredo) show a progressive decrease in quartz content and a significant increase in feldspathic, plutonic fragments. A more evolved phase of denudation of the “Caçapava high”, exposing leucogranitoids of the Caçapava do Sul complex, is proposed for this interval.     

Denudation rates of the Quadrilátero Ferrífero (Minas Gerais, Brazil): Preliminary results from measurements of solute fluxes in rivers and in situ-produced cosmogenic Be

This paper investigates the denudation rates in the Quadrilátero Ferrífero, Minas Gerais State (Brazil). The aim is to compare chemical weathering rates from measurements of solute fluxes in rivers and long-term mean erosion rates deduced from in situ-produced cosmogenic ¹⁰Be concentrations measured in fluvial sediments. Both water samples and sediments were collected in fifteen stations (checkpoints) located in four hydrographic basins with low anthropogenic perturbations.Depending of the type of substratum, three degrees of chemical denudation rates from water samples are observed: (i) high rates in marbles; (ii) medium rates in schists, phyllites, granites, gneisses and migmatites; (iii) low rates in quartzites and itabirites. Preliminary results of long-term erosion rates deduced from in situ-produced ¹⁰Be are comparable with those of chemical rates.     

Non-Critical Precursory Accelerating Seismicity Theory (NC PAST) and limits of the power-law fit methodology

Iron formation rocks of Quadrilátero Ferrífero, Brazil, were deformed at greenschist facies. Quartz grains in bedding parallel veins were sheared and deformed by a combination of mechanisms assisted by aqueous fluids. Veins in the outcrop appear to be stretched parallel to the compositional layering. The overall vein shapes resemble those of boundinage and pinch and swell. In thin sections, veins show microstructures similar to those observed in hand samples, where domains of large quartz crystals are pulled apart for several millimeters. The voids between quartz fragments are filled with domains of polycrystalline quartz. The microstructural and orientation data show that the strain imposed on the vein as a rigid and competent layer was not accommodated in the quartz polycrystals exclusively by crystal plastic deformation or dynamic recrystallization. The new grains are strain-free, with straight boundaries and with weak to random crystallographic fabrics. We interpret these features to have resulted from a combination of processes, which included grain boundary sliding accomplished by solution transfer. We propose that the coeval operation of both mechanisms allows the aggregate to deform at higher strain rates without necking of the vein layer in a type of flow similar to those described in superplastic regimes.     

Alkali element mobility as a vector for gold mineralization: An example from Central Brazil

The Brazilian Pilar and Três Buracos Paleoproterozoic mid-tier gold deposits are located in the south western Pilar de Goiás greenstone belt, containing 61,688 kg and 7,144 kg of gold, respectively, in addition to approximately 30,000 kg of past production (1736–2018). This research aimed to assess the hypothesis that the mobility of alkali elements may be used to facilitate the discovery of new gold deposits in hydrothermal systems by creating geochemical vectors based on alkali element mobility. The hypothesis was first proposed for the mafic rocks in the West Australian Goldfields and has been adopted in other deposits worldwide (E.g., Andorinhas greenstone belt, Brazil, Pataz gold field, Peru, and Rio das Velhas gold deposit, Brazil).The procedures consisted in the analysis of metasedimentary and mafic rock types from two drill holes from the Pilar de Goiás greenstone belt, central Brazil. These drill holes have intercepted mineralized and barren rock types. The petrographic and energy dispersive spectrometric results indicated that the host rocks around the orebodies present intense sericitization, albitization, and sulfidation. The chemical results reveal that the mobile elements Cs, Rb and Ba tend to be enriched in gold-bearing rock units and depleted in barren rock units. These elements are carried by fluids and can replace K in the structure of the newly formed hydrothermal phyllosilicates forming a halo of alkali-rich elements of up to 50 m around the orebodies.The upper continental crust normalized ratio ((Cs + Rb)/Th)_UCC was adopted as an alteration index to evaluate and distinguish possible mineralized zones, with ((Cs + Rb)/Th)_UCC > 3, from barren zones, with ((Cs + Rb)/Th)_UCC < 3. The ratio ((Cs + Rb)/Th)_UCC increases towards mineralization, providing a vector to possible gold mineralization, with a threshold value > 3 indicating high prospectivity.     

The geology of the Morro Velho gold deposit in the Archean Rio das Velhas greenstone belt,Quadrilátero Ferrífero,Brazil

The Morro Velho gold deposit, Quadrilátero Ferrífero region, Minas Gerais, Brazil, is hosted by rocks at the base of the Archean Rio das Velhas greenstone belt. The deposit occurs within a thick carbonaceous phyllite package, containing intercalations of felsic and intermediate volcaniclastic rocks and dolomites. Considering the temporal and spatial association of the deposit with the Rio das Velhas orogeny, and location in close proximity to a major NNW-trending fault zone, it can be classified as an orogenic gold deposit. Hydrothermal activity was characterized by intense enrichment in alteration zones of carbonates, sulfides, chlorite, white mica±biotite, albite and quartz, as described in other Archean lode-type gold ores. Two types of ore occur in the deposit: dark gray quartz veins and sulfide-rich gold orebodies. The sulfide-rich orebodies range from disseminated concentrations of sulfide minerals to massive sulfide bodies. The sulfide assemblage comprises (by volume), on average, 74% pyrrhotite, 17% arsenopyrite, 8% pyrite and 1% chalcopyrite. The orebodies have a long axis parallel to the local stretching lineation, with continuity down the plunge of fold axis for at least 4.8 km. The group of rocks hosting the Morro Velho gold mineralization is locally referred to as lapa seca. These were isoclinally folded and metamorphosed prior to gold mineralization. The lapa seca and the orebodies it hosts are distributed in five main tight folds related to F1 (the best examples are the X, Main and South orebodies, in level 25), which are disrupted by NE- to E-striking shear zones. Textural features indicate that the sulfide mineralization postdated regional peak metamorphism, and that the massive sulfide ore has subsequently been neither metamorphosed nor deformed. Lead isotope ratios indicate a model age of 2.82 ± 0.05 Ga for both sulfide and gold mineralization. The lapa seca are interpreted as the results of a pre-gold alteration process and may be divided into carbonatic, micaceous and quartzose types. The carbonatic lapa seca is subdivided into gray and brown subtypes. Non-mineralized, gray carbonatic lapa seca forms the hanging wall to the orebodies, and is interpreted as the product of extreme CO₂ metasomatism during hydrothermal alteration. This dolomitic lapa seca ranges in composition from relatively pure limestone and dolomite to silty limestone and dolomite. The brown carbonatic and micaceous lapa secas are the host rocks to gold. These units are interpreted to correspond to the sheared and hydrothermal products of metamorphosed volcaniclastic and/or volcanic rocks of varying composition from dacitic to andesitic, forming various types of schists and phyllites. The high-grade, massive sulfide orebodies occur at the base of the gray carbonatic lapa seca. Both disseminated mineralization and quartz veins are hosted by micaceous lapa seca. The data are consistent with a model of epigenetic mineralization for the lapa seca, from a hydrothermal fluid derived in part from the Archean basement or older crust material.     

Biostratigraphic characterization by means of ammonoids of the lower Aptian Oceanic Anoxic Event (OAE 1a) in the eastern Iberian Chain (Maestrat Basin, eastern Spain)

It is now generally accepted that the Oceanic Anoxic Event 1a [OAE 1a] correlates with the lower part of the Leupoldina cabri planktonic foraminiferal Zone. Its calibration against the standard ammonite scale, however, seems to be more problematic. This is due, in part, to the fact that ammonites are scarce and/or of little diagnostic value from a biochronological viewpoint in the lower Aptian pelagic successions where the black shale horizons are better developed.We have been able to characterize OAE 1a geochemically in the relatively shallow water deposits of the eastern Iberian Chain (Maestrat Basin, eastern Spain), where ammonite faunas are rich. The interval corresponding to this event is dominated by the genera Roloboceras and Megatyloceras, accompanied by Deshayesites forbesi and Deshayesites gr. euglyphus/spathi. This assemblage is characteristic of the middle/upper part of the Deshayesites weissi Zone. The first occurrence of the species Deshayesites deshayesi (d'Orbigny), which marks the base of the overlying zone, takes place in our sections some metres above the OAE 1a interval.In the historical stratotype region of Cassis-La Bédoule (southern Provence Basin, southeastern France), the OAE 1a interval is also characterized by the presence of Roloboceras and Megatyloceras. Nevertheless, it has usually been correlated with the D. deshayesi Zone. In our opinion, this discrepancy is due to divergences in the taxonomic assignments of the deshayesitids present in these beds. In fact, the specimens attributed by French authors [Ropolo, P., Conte, G., Gonnet, R., Masse, J.P., Moullade, M., 2000. Les faunes d'Ammonites du Barrémien supérieur/Aptien inférieur (Bédoulien) dans la région stratotypique de Cassis-La Bédoule (SE France): état des connaissances et propositions pour une zonation par Ammonites du Bédoulien-type. Géologie Méditerranéenne 25, 167–175; Ropolo, P., Moullade, M., Gonnet, R., Conte, G., Tronchetti, G., 2006. The Deshayesitidae Stoyanov, 1949 (Ammonoidea) of the Aptian historical stratotype region at Cassis-La Bédoule (SE France), Carnets de Géologie / Notebooks on Geology Memoir 2006/01, 1–46.] to D. deshayesi and D. dechyi can be reinterpreted as belonging to D. forbesi.Following this reinterpretation, the Roloboceras beds (equivalent of OAE 1a) of Cassis-La Bédoule would also correspond to the D. weissi Zone. This age is additionally corroborated by data from southern England [Casey, R., 1961a. The stratigraphical palaeontology of the Lower Greensand. Palaeontology 3, 487–621; Casey, R., 1961b. A Monograph of the Ammonoidea of the Lower Greensand, part III. Palaeontographical Society, London, pp. 119–216], and by our recent observations in Le Teil (Ardèche Platform, southeastern France), where the Roloboceras faunas are also associated with Deshayesites consobrinus and Deshayesites gr. euglyphus, taxa that are characteristic of the D. weissi Zone.     

The genesis and tectonic control on archaean gold deposits of the Western Australian Shield — A metamorphic replacement model

Gold deposits occur in greenstone belts world wide, and contribute to anomalously high gold production from Archaean terranes. As in other cratons, Archaean gold mineralization of Western Australia represents a complex array of deposit styles. Despite this, most deposits are clearly epigenetic, and large deposits have a number of features in common, including their strong structural controls, distinctive wallrock alteration (Fe-sulphide, K-mica±albite, Ca---Mg---Fe carbonates), consistent metal associations (Au---Ag---As---Sb---W---B; low base metals), commonly Fe-rich host rocks, great depth extension and lack of appreciable vertical zonation. These shared characteristics, combined with their ubiquitous occurrence, indicate that Archaean gold deposits had a common origin related to the tectonic evolution of greenstone belts.Auriferous hydrothermal systems were broadly synchronous with regional metamorphism and emplacement of synkinematic granitoids and felsic (porphyry) intrusions. Although these gold systems involved low-salinity, lowdensity, reduced, near-neutral H₂O---CO₂ fluids carrying gold as reduced sulphur complexes, the origin of the fluids is equivocal. Most timing evidence and stable isotope data cannot distinguish metamorphic from magmatic (granitoid or felsic porphyry) orggins, but the lack of consistent spatial relationships between specific, volumetrically significant intrusive phases and large gold deposits in a number of cratons strongly favours metamorphic derivation of fluids.The metamorphic-replacement model for gold mineralization involves devolatilization of the lower portions of the greenstone pile, with high geothermal gradients inhibiting significant melting. CO₂ possibly formed by the decarbonation of early alteration, related to mantle degassing along crustal-scale, synbasinal fault zones. Auriferous fluids were channelled along greenstone-scale faults, in part developed during reactivation of crustal-scale faults in a strike-slip regime. Gold deposition occurred largely under greenschist facies conditions (about 300–400°C, 1–2 kb) in response to decreasing gold solubility with declining temperature. However, a major control on gold deposition was fluid/wallrock interaction. Many large deposits formed by sulphidation of Fe-rich host rocks, with synchronous deposition of Fe-sulphides and gold. However, the variable nature of gold-depositing reactions, including lowering of fO₂ and pH, allowed a multitude of small, and some large, deposits to form wherever that fluid circulation occurred. In consequence, several of the relatively small deposits currently worked from open pit are hosted by ultramafic and felsic rocks. There are few constraints on the source of components (Au, S, K, CO₂) added to gold deposits, but even giant deposits such as the Golden Mile, Kalgoorlie could have formed from a realistic greenstone source volume (ca. 8×8×5 km). Convective circulation of fluids could have contributed to the generation of high fluid-rock ratios.On the regional scale, the markedly heterogeneous distribution of large gold deposits, gold productivity and host rocks to deposits can be accommodated by the metamorphic-replacement model. The most favourable conditions for development of auriferous hydrothermal systems operated in younger (ca. 2.7±0.1 Ga) rift-phase greenstones where greatest extension and crustal thinning produced high geothermal gradients, crustal-scale synbasinal faults, and rapid extrusion and burial of volcanics, including abundant komatiites. Iron-rich tholeiitic basalts and dolerites were preferred host rocks for large gold deposits. The least favourable conditions existed in older (ca. 3.5-3.4 Ga) platformphase greenstones, where gentle sagging on submerged continental crust produced eruption of mainly mafic volcanics with few komatiites, commonly in very shallow-water environments. This allowed intense synvolcanic alteration of both gold source rocks and potential host rocks. The generally smaller gold deposits formed mainly in ultramafic or greywacke hosts. Younger (ca. 3.0 Ga) platform-phase greenstones appear intermediate in nature but, unlike other greenstones, have significant epigenetic gold deposits in originally oxide-facies BIF, which were deposited on relatively deep-water platforms. Similar controls appear to exist on a world scale, with gold mineralization peaking at ca. 2.7±0.1 Ga in response to development of major rift zones in thickened, relatively mature continental crust. Interestingly, the giant Witwatersrand goldfield formed at about the same time.     

Nature, diversity of deposit types and metallogenic relations of South China

The South China Region is rich in mineral resources and has a wide diversity of deposit types. The region has undergone multiple tectonic and magmatic events and related metallogenic processes throughout the earth history. These tectonic and metallogenic processes were responsible for the formation of the diverse styles of base and precious metal deposits in South China making it one of the resource-rich regions in the world. During the Proterozoic, the South China Craton was characterised by rifting of continental margin before eruption of submarine volcanics and development of platform carbonate rocks, and the formation of VHMS, stratabound copper and MVT deposits. The Phanerozoic metallogeny of South China was related to opening and closing of the Tethyan Ocean involving multiple orogenies by subduction, back-arc rifting, arc–continent collision and post-collisional extension during the Indosinian (Triassic), Yanshanian (Jurassic to Cretaceous) and Himalayan (Tertiary) Orogenies. The Late Palaeozoic was a productive metallogenic period for South China resulting from break-up and rifting of Gondwana. Significant stratabound base and precious metal deposits were formed during the Devonian and Carboniferous (e.g., Fankou and Dabaoshan deposits). These Late Palaeozoic SEDEX-style deposits have been often overprinted by skarn systems associated with Yanshanian magmatism (e.g., Chengmenshan, Dongguashan and Qixiashan). A number of Late Palaeozoic to Early Mesozoic VHMS deposits also developed in the Sanjiang fold belt in the western part of South China (e.g., Laochang and Gacun).South China has significant sedimentary rock-hosted Carlin-like deposits, which occur in the Devonian- to Triassic-aged accretionary wedge or rift basins at the margin of the South China Craton. They are present in a region at the junction of Yunnan, Guizhou, and Guangxi Provinces called the ‘Southern Golden Triangle’, and are also present in NW Sichuan, Gansu and Shaanxi, in an area known as the ‘Northern Golden Triangle’ of China. These deposits are mostly epigenetic hydrothermal micron-disseminated gold deposits with associated As, Hg, Sb + Tl mineralisation similar to Carlin-type deposits in USA. The important deposits in the Southern Golden Triangle are Jinfeng (Lannigou), Zimudang, Getang, Yata and Banqi in Guizhou Province, and the Jinya and Gaolong deposits in Guangxi District. The most important deposits in the Northern Golden Triangle are the Dongbeizhai and Qiaoqiaoshang deposits.Many porphyry-related polymetallic copper–lead–zinc and gold skarn deposits occur in South China. These deposits are related to Indosinian (Triassic) and Yanshanian (Jurassic to Cretaceous) magmatism associated with collision of the South China and North China Cratons and westward subduction of the Palaeo-Pacific Plate. Most of these deposits are distributed along the Lower to Middle Yangtze River metallogenic belt. The most significant deposits are Tonglushan, Jilongshan, Fengshandong, Shitouzui and Jiguanzui. Au–(Ag–Mo)-rich porphyry-related Cu–Fe skarn deposits are also present (Chengmenshan and Wushan in Jiangxi Province and Xinqiao, Mashan-Tianmashan, Shizishan and Huangshilaoshan in Anhui Province). The South China fold belt extending from Fujian to Zhejiang Provinces is characterised by well-developed Yanshanian intrusive to subvolcanic rocks associated with porphyry to epithermal type mineralisation and mesothermal vein deposits. The largest porphyry copper deposit in China, Dexing, occurs in Jiangxi Province and is hosted by Yanshanian granodiorite. The high-sulphidation epithermal system occurs at the Zijinshan district in Fujian Province and epithermal to mesothermal vein-type deposits are also found in the Zhejiang Province (e.g., Zhilingtou). Part of Shandong Province is located at the northern margin of the South China Craton and the province has unique world class granite-hosted orogenic gold deposits. Occurrences of Pt–Pd–Ni–Cu–Co are found in Permian-aged Emeishan continental flood basalt (ECFB) in South China (Jinbaoshan and Baimazhai in Yunnan Province and Yangliuping in Sichuan Province). South China also has major vein-type tungsten–tin–bismuth–beryllium–sulphide and REE deposits associated with Yanshanian magmatism (e.g., Shizhuyuan and Xihuashan), important world class stratabound base metal–tin deposits (Dachang deposit), and the large antimony deposits (Xikuangshan and Woxi). During the Himalayan Orogeny, many giant deposits were formed in South China including the recently emerging Yulong and Gangdese porphyry copper belts in Tibet and the Ailaoshan orogenic gold deposits in Yunnan.     

The Archean BIF-hosted Cuiabá Gold deposit,Quadrilátero Ferrífero,Minas Gerais,Brazil

The Cuiabá Gold Deposit is located in the northern part of the Quadrilátero Ferrífero, Minas Gerais State, Brazil. The region constitutes an Archean granite–greenstone terrane composed of a basement complex (ca. 3.2 Ga), the Rio das Velhas Supergroup greenstone sequence, and related granitoids (3.0–2.7 Ga), which are overlain by the Proterozoic supracrustal sequences of the Minas (< 2.6–2.1  Ga) and Espinhaço (1.7 Ga) supergroups.The stratigraphy of the Cuiabá area is part of the Nova Lima Group, which forms the lower part of the Rio das Velhas Supergroup. The lithological succession of the mine area comprises, from bottom to top, lower mafic metavolcanics intercalated with carbonaceous metasedimentary rocks, the gold-bearing Cuiabá-Banded Iron Formation (BIF), upper mafic metavolcanics and volcanoclastics and metasedimentary rocks. The metamorphism reached the greenschist facies. Tectonic structures of the deposit area are genetically related to deformation phases D₁, D₂, D₃, which took place under crustal compression representing one progressive deformational event (E_n).The bulk of the economic-grade gold mineralization is related to six main ore shoots, contained within the Cuiabá BIF horizon, which range in thickness between 1 and 6 m. The BIF-hosted gold orebodies (> 4 ppm Au) represent sulfide-rich segments of the Cuiabá BIF, which grade laterally into non-economic mineralized or barren iron formation. Transitions from sulfide-rich to sulfide-poor BIF are indicated by decreasing gold grades from over 60 ppm to values below the fire assay detection limit in sulfide-poor portions. The deposit is “gold-only”, and shows a characteristic association of Au with Ag, As, Sb and low base-metal contents. The gold is fine grained (up to 60 μm), and is generally associated with sulfide layers, occurring as inclusions, in fractures or along grain boundaries of pyrite, the predominant sulfide mineral (> 90 vol.%). Gold is characterized by an average fineness of 0.840 and a large range of fineness (0.759 to 0.941).The country rocks to the mineralized BIF show strong sericite, carbonate and chlorite alteration, typical of greenschist facies metamorphic conditions. Textures observed on microscopic to mine scales indicate that the mineralized Cuiabá BIF is the result of sulfidation involving pervasive replacement of Fe-carbonates (siderite–ankerite) by Fe-sulfides. Gold mineralization at Cuiabá shows various features reported for Archean gold–lode deposits including the: (1) association of gold mineralization with Fe-rich host rocks; (2) strong structural control of the gold orebodies, showing remarkable down-plunge continuity (> 3 km) relative to strike length and width (up to 20 m); (3) epigenetic nature of the mineralization, with sulfidation as the major wall–rock alteration and directly associated with gold deposition; (4) geochemical signature, with mineralization showing consistent metal associations (Au–Ag–As–Sb and low base metal), which is compatible with metamorphic fluids.