THE LATE QUATERNARY ACTIVITY AND FORMATION MECHANISM OF BAOERTU FAULT ZONE,EASTERN TIANSHAN SEGMENT

Influenced by the far-field effect of India-Eurasia collision, Tianshan Mountains is one of the most intensely deformed and seismically active intracontinental orogenic belts in Cenozoic. The deformation of Tianshan is not only concentrated on its south and north margins, but also on the interior of the orogen. The deformation of the interior of Tianshan is dominated by NW-trending right-lateral strike-slip faults and ENE-trending left-lateral strike-slip faults. Compared with numerous studies on the south and north margins of Tianshan, little work has been done to quantify the slip rates of faults within the Tianshan Mountains. Therefore, it is a significant approach for geologists to understand the current tectonic deformation style of Tianshan Mountains by studying the late Quaternary deformation characteristics of large fault and fold zones extending through the interior of Tianshan. In this paper, we focus on a large near EW trending fault, the Baoertu Fault (BETF) in the interior of Tianshan, which is a large fault in the eastern Tianshan area with apparent features of deformation, and a boundary fault between the central and southern Tianshan. An M_S5.0 earthquake event occurred on BETF, which indicates that this fault is still active. In order to understand the kinematics and obtain the late Quaternary slip rate of BETF, we made a detailed research on its late Quaternary kinematic features based on remote sensing interpretation, drone photography, and field geological and geomorphologic survey, the results show that the BETF is of left-lateral strike-slip with thrust component in late Quaternary. In the northwestern Kumishi basin, BETF sinistrally offsets the late Pleistocene piedmont alluvial fans, forming fault scarps and generating sinistral displacement of gullies and geomorphic surfaces. In the bedrock region west of Benbutu village, BETF cuts through the bedrock and forms the trough valley. Besides, a series of drainages or rivers which cross the fault zone and date from late Pleistocene have been left-laterally offset systematically, resulting in a sinistral displacement ranging 0.93~4.53km. By constructing the digital elevation model (DEM) for the three sites of typical deformed morphologic units, we measured the heights of fault scarps and left-lateral displacements of different gullies forming in different times, and the result shows that BEFT is dominated by left-lateral strike-slip with thrust component. We realign the bended channels across the fault at BET01 site and obtain the largest displacement of 67m. And we propose that the abandon age of the deformed fan is about 120ka according to the features of the fan. Based on the offsets of channels at BET01 and the abandon age of deformed fan, we estimate the slip rate of 0.56mm/a since late Quaternary. The Tianshan Mountains is divided into several sub-blocks by large faults within the orogen. The deformation in the interior of Tianshan can be accommodated or absorbed by relative movement or rotation. The relative movement of the two sub-blocks surrounded by Boa Fault, Kaiduhe Fault and BETF is the dominant cause for the left-lateral movement of BETF. The left-lateral strike-slip with reverse component of BETF in late Quaternary not only accommodates the horizontal stain within eastern Tianshan but also absorbs some SN shortening of the crust.     

钻探揭示的黄河断裂北段活动性和滑动速率

黄河断裂是银川盆地内展布最长、切割最深的一条深大断裂,也是银川盆地的东边界。由于其北段呈隐伏状,因此,该段的活动性和滑动速率长期未知,影响了对盆地演化和地震危险性的认识。文中选择具有石油地震勘探基础的陶乐镇为研究场点,以人工浅层地震勘探结果为依据,在黄河断裂北段布设了一排钻孔联合剖面,并对标志层进行年代测试,获得了断裂的活动时代和滑动速率。结果表明,黄河断裂北段在晚更新世末期或全新世有过活动,在（28.16±0.12）ka BP 以来的累积位移为0.96m,晚第四纪以来的平均滑动速率为0.04mm/a,该值明显低于南段灵武断层（0.24mm/a）;尽管向下切割了莫霍面,黄河断裂晚第四纪活动强度和发震能力均要低于切割相对浅的贺兰山东麓断裂;黄河断裂可能在新生代之前已经强烈活动并深切莫霍面,新生代以来,银川盆地的构造活动迁移分解到以贺兰山东麓断裂为主的多条断裂之上,地壳双层伸展模型可解释银川盆地现今深浅部构造活动间的联系。     

ESR dating of the Eupchon fault, South Korea

We investigated temporal pattern of Quaternary fault activity of the Eupchon fault zone in the southeastern part of the Korean peninsula, using ESR dating of fault rocks. The counterfeit E′ signal significantly affected the equivalent dose on some samples. In particular, the counterfeit E′ signal tends to affect samples with E′ intensity close to saturation level. Storage at room temperature for 360 days and heating at 170 °C for 15 min. after γ-ray irradiation did not change significantly the intensities, the dose responses and ESR ages for OHC, Al, and Ti signals. ESR ages from the Eupchon fault zone range from 2000 to 500 ka. The fault rocks were reactivated at least five times 2000, 1300, 900–1100, 700–800, and 500–600 ka ago. These data indicate that long-term cyclic fault activity of this fault zone continued into the Quaternary. The results from this study suggest that the Eupchon fault zone can be classified as a potentially active fault and presents some potential seismic hazards to the nuclear power plant in its vicinity.     

西秦岭北缘断裂带黄香沟段晚第四纪水平位移特征及其微地貌响应

西秦岭北缘断裂带是青藏高原东北部一条左旋走滑为主的活动断裂带,其在黄香沟一段活动性较强,活动现象典型。对沿断裂带分布的地貌、地质体等晚第四纪位移量的研究表明,在黄香沟一带,断裂晚更新世晚期以来的水平位移量最大为40~60m;最小为6~8m,可能是一次滑动事件的特征位错量。断裂带上的位移具有分组特征,各组位移值之间具有6~8m的稳定增量。位移值的分组性和增量特征反映了该段断裂具有特征地震的活动特征,而7组位错值则反映了断裂7次特征活动事件。关于黄香沟一带与断裂相关的微地貌分析,也获得了大致相对应的事件次数。并由此初步推测,晚更新世晚期以来,该断裂带有过多次强烈活动,活动期次明显     

阿拉善地块南缘的左旋走滑断裂与阿尔金断裂带的东延

阿拉善地块南缘发育了由5条走向近EW、向西收敛、向东撒开的断裂组成的断裂束,每条断裂长度一般>100km,控制第四纪盆地呈EW向长条状展布,卫片上线性影像清晰,晚第四纪以来表现出左旋走滑活动的特点。断裂束西段的金塔南山断裂与阿尔金断裂带东段的宽滩山段趋于交会,并与文殊山构造隆起之间构成构造转换关系。分析认为金塔南山断裂以及整个阿拉善南缘断裂束是阿尔金断裂左旋运动的东延部分,断裂束在平面上“帚状”的、向东撒开的构造样式有利于走滑运动量的分解、消减和吸收,符合走滑断裂末端的构造特点。阿拉善南缘断裂束的左旋走滑活动有可能是阿尔金断裂带进一步向东扩展的结果,其时代可能发生于早更新世末—中更新世初     

临潼-长安断裂带晚第四纪以来的活动性

对临潼-长安断裂带进行了详细的野外调查,以期掌握其最新活动年代和第四纪以来的活动特征。该断裂总体走向NE,以张性垂直运动为主,断面明显错断了黄土中的第1层古土壤S1,说明其晚更新世以来仍在活动,并且北段和中段的活动性比南段强,但是错距大多<2m,滑动速率较小,考虑到临潼-长安断裂带由多条次级断层组成,其整体活动性应该比我们计算得到的局部断层滑动速率大得多。断层错距自上而下成递增趋势,并且根据不同地层年代计算出的滑动速率基本一致,因此该断裂带自中更新世晚期以来极可能以垂向蠕滑活动为主     

荥经-马边-盐津逆冲构造带断裂运动组合及地震分段特征

逆冲构造带的分段性研究是评价该类发震构造地震危险性的基础工作。荥经-马边-盐津逆冲构造带是青藏高原东南边缘重要的NW向强震构造带,该构造带以逆冲错动为主要活动形式,其组合形式与逆冲强度存在南北差异。通过NE向横向断裂的构造地貌分析,发现横向断裂以右旋走滑活动为主,兼有倾滑活动。根据其与纵向断裂的交接关系,将横向断裂概括为横向分割断裂、横向撕裂断裂和横向转换断裂3种类型,讨论了3类横向断裂在逆冲构造带分段中所起的不同作用,进而将荥经-马边-盐津逆冲构造带分为独立的3段,并分析了各段的地震活动特征。研究表明,荥经-马边-盐津逆冲构造带以横向断裂为标志的3分段特点,既体现了段与段之间断裂活动强度、地震破裂强度与步调的差异,又体现了段内地震破裂步调的一致性,表明横向断裂在一定程度上控制了逆冲构造带的破裂分段,只是横向断裂的类型不同,其所起的作用也不同     

ANALYSIS OF EVOLUTION OF THE RIYUESHAN FAULT SINCE LATE PLEISTOCENE USING STRUCTURAL GEOMORPHOLOGY

The northeastern margin of Tibetan plateau is an active block controlled by the eastern Kunlun fault zone, the Qilian Shan-Haiyuan fault zone, and the Altyn Tagh fault zone. It is the frontier and the sensitive area of neotectonic activity since the Cenozoic. There are widespread folds, thrust faults and stike-slip faults in the northeastern Tibetan plateau produced by the intensive tectonic deformation, indicating that this area is suffering the crustal shortening, left-lateral shear and vertical uplift. The Riyueshan Fault is one of the major faults in the dextral strike-slip faults systems, which lies between the two major large-scale left-lateral strike-slip faults, the Qilian-Haiyuan Fault and the eastern Kunlun Fault. In the process of growing and expanding of the entire Tibetan plateau, the dextral strike-slip faults play an important role in regulating the deformation and transformation between the secondary blocks. In the early Quaternary, because of the northeastward expansion of the northeastern Tibetan plateau, tectonic deformations such as NE-direction extrusion shortening, clockwise rotation, and SEE-direction extrusion occurred in the northeastern margin of the Tibetan plateau, which lead to the left-lateral slip movement of the NWW-trending major regional boundary faults. As the result, the NNW-trending faults which lie between these NWW direction faults are developed. The main geomorphic units developed within the research area are controlled by the Riyueshan Fault, formed due to the northeastward motion of the Tibet block. These geomorphic units could be classified as:Qinghai Lake Basin, Haiyan Basin, Datonghe Basin, Dezhou Basin, and the mountains developed between the basins such as the Datongshan and the Riyueshan. Paleo basins, alluvial fans, multiple levels of terraces are developed at mountain fronts. The climate variation caused the formation of the geomorphic units during the expansion period of the lakes within the northeastern Tibetan plateau. There are two levels of alluvial fans and three levels of fluvial terrace developed in the study area, the sediments of the alluvial fans and fluvial terraces formed by different sources are developed in the same period. The Riyueshan Fault connects with the NNW-trending left-lateral strike-slip north marginal Tuoleshan fault in the north, and obliquely connects with the Lajishan thrust fault in the south. The fault extends for about 180km from north to south, passing through Datonghe, Reshui coal mine, Chaka River, Tuole, Ketu and Xicha, and connecting with the Lajishan thrusts near the Kesuer Basin. The Riyueshan Fault consists of five discontinuous right-step en-echelon sub-fault segments, with a spacing of 2~3km, and pull-apart basins are formed in the stepovers. The Riyueshan Fault is a secondary fault located in the Qaidam-Qilian active block which is controlled by the major boundary faults, such as the East Kunlun Fault and the Qilian-Haiyuan Fault. Its activity characteristics provide information of the outward expansion of the northeastern margin of Tibet. Tectonic landforms are developed along the Riyueshan Fault. Focusing on the distinct geomorphic deformation since late Pleistocene, the paper obtains the vertical displacement along the fault strike by RTK measurement method. Based on the fault growth-linkage theory, the evolution of the Riyueshan Fault and the related kinetic background are discussed. The following three conclusions are obtained:1)According to the characteristics of development of the three-stage 200km-long steep fault scarp developed in the landforms of the late Pleistocene alluvial fans and terraces, the Riyueshan Fault is divided into five segments, with the most important segment located in the third stepover(CD-3); 2)The three-stage displacement distribution pattern of the Riyueshan Fault reveals that the fault was formed by the growths and connections of multiple secondary faults and is in the second stage of fault growth and connection. With CD-3 as the boundary, the faults on the NW side continue to grow and connect; the fault activity time on the SE side is shorter, and the activity intensity is weaker; 3)The extreme value of the fault displacement distribution curve indicates the location of strain concentration and stress accumulation. With the stepover CD-3 as the boundary, the stress and strain on NW side are mainly concentrated in the middle and fault stepovers. The long-term accumulation range of stress on the SE side is relatively dispersed. The stress state may be related to the counterclockwise rotation inside the block under the compression of regional tectonic stress.     

Neotectonic activity and formation mechanism of the Yishu Fault Zone

On the basis of comprehensive analyses of fault textures and geometry, the active methods, stress field, mechanism and time of the Yishu Fault Zone during the neotectonic period are discussed in this paper. The results show that the Yishu Fault Zone is a major mobile belt since the Quaternary. It consists of four major active faults with reverse dextral slip. Their active intensity increases eastwards and southwards. Fault-slip data from many active faults in the fault zone demonstrate that ENE-WSW compression predominated in the neotectonic period. Detailed field investigation shows that formation mechanism of shallow, active faults in the Yishu Fault Zone includes direct boundary fault reactivity, buried fault propagation, and reactivity of antithetic and truncating faults. In most cases, shallow, active faults in the fault zone are developed through direct reactivity or upward propagation of the previous four graben boundary faults.     

山东半岛东北部新发现近EW向活断层

山东半岛东北部地区晚第四纪的构造活动以整体性抬升为主,内部的断裂活动相对较弱,晚更新世以来的断裂活动仅分布在局部地区,新发现的东殿后断裂是其中的1条。断裂总体走向近EW,全长约20km,地貌上表现为由3条河流上游组成的谷地。断裂错断的最新地层的热释光年龄为84～75kaBP,上覆坡积角砾层的热释光年龄为64kaBP,断裂发育的松软断层泥的热释光年龄为82kaBP。断裂的剖面特征和断盖地层的年龄表明,东殿后断裂的最新活动时代是晚更新世早中期,垂直活动速率不<016mm/a,晚更新世晚期以来停止活动;断裂的最大潜在地震为6级     

宁夏吴忠地区北部的浅部结构和隐伏断裂——地震反射剖面结果

应用浅层地震勘探法对宁夏吴忠地区北部的浅部地壳结构和隐伏活动断裂进行研究。结果表明,该区存在2条隐伏断裂,分别为银川主断层南段和新华桥断层。推测银川主断层南段为近SN走向的W倾正断层,断层下盘地层界面一般呈近水平状展布,而在断层上盘,T_Q及其以下的地层界面向断面方向倾伏并显示出逆牵引现象,断层向上错断了第四系内部。钻孔联合地质剖面及浅层地震探测结果共同揭示新华桥断层为一条走向NE,倾向SW的正断层,深、浅地震测线控制的新华桥断层延伸长度9 km左右,向上错断了第四系内部的T_(02)界面。     

阿尔金主断裂东端第四纪左行走滑的新证据

通过对阿尔金主断裂东端早更新世冲积相砾岩的追踪,发现疏勒河古冲积扇沉积的西边界距现今疏勒河河口约 10km,由此提出了阿尔金主断裂东端第四纪以来左行走滑错动 10km的沉积学新证据。通过对疏勒河河口阶地的分析,认为疏勒河河道沿阿尔金主断裂 2 8km的肘状弯曲除主要反映了断裂的左行走滑外,可能还包含了河流弯折段侧向侵蚀因素的影响。对阿尔金主断裂东端第四纪期间的位错量和走滑速率进行了讨论     

川滇地区断层相互作用的地震活动证据及有限元模拟

对川滇地区主要活动断裂地震活动性的分析表明 ,该区主要活动断裂间存在地震活动的相关性 :1)强震活跃期沿着鲜水河断裂、小江断裂、红河断裂、龙陵 -澜沧断裂及NE向的龙门山 -瑞丽断裂依次迁移 ;2 )鲜水河断裂与龙陵 -澜沧断裂不仅在强震活动上 ,而且在b值变化上存在较强的相关性 ,是平行断裂在区域应力场作用下相互作用的结果 ;3)龙门山 -瑞丽断裂与上述川滇地区其它近NW向断裂间存在地震交替活动的现象 ;4 )龙门山 -瑞丽断裂的地震具有分段活动的特征 ,是断块差异活动的体现。有限元分析显示 ,上述断层相互作用现象是块体非均匀运动过程中应力场调整的反映 ,是块体运动的结果。研究表明川滇地区主要断层地震活动间存在 3种相互作用的现象 ,即块体边界迁移型、旋向相反平行断层交替型和交叉断层交替型     

GEOMORPHIC FEATURES AND LATE QUATERNARY SLIP RATE OF THE SOUTHERN ZONGWULONG SHAN FAULT

With the continuous collision of the India and Eurasia plate in Cenozoic, the Qilian Shan began to uplift strongly from 12Ma to 10Ma. Nowadays, Qilian Shan is still uplifting and expanding. In the northern part of Qilian Shan, tectonic activity extends to Hexi Corridor Basin, and has affected Alashan area. In the southern part of Qilian Shan, tectonic activity extends to Qaidam Basin, forming a series of thrust faults in the northern margin of Qaidam Basin and a series of fold deformations in the basin. The southern Zongwulong Shan Fault is located in the northeastern margin of Qaidam Basin, it is the boundary thrust fault between the southern margin of Qilian Shan and Qaidam Basin. GPS studies show that the total crustal shortening rate across the Qilian Shan is 5~8mm/a, which absorbs 20% of the convergence rate of the Indian-Eurasian plate. Concerning how the strain is distributed on individual fault in the Qilian Shan, previous studies mainly focused on the northern margin of the Qilian Shan and the Hexi Corridor Basin, while the study on the southern margin of the Qilian Shan was relatively weak. Therefore, the study of late Quaternary activity of southern Zongwulong Shan Fault in southern margin of Qilian Shan is of great significance to understand the strain distribution pattern in Qilian Shan and the propagation of the fault to the interior of Qaidam Basin. At the same time, because of the strong tectonic activity, the northern margin of Qaidam Basin is also a seismic-prone area. Determining the fault slip rate is also helpful to better understand the movement behaviors of faults and seismic risk assessment.Through remote sensing image interpretation and field geological survey, combined with GPS topographic profiling, cosmogenic nuclides and optically stimulated luminescence dating, we carried out a detailed study at Baijingtu site and Xujixiang site on the southern Zongwulong Shan Fault. The results show that the southern Zongwulong Shan Fault is a Holocene reverse fault, which faulted a series of piedmont alluvial fans and formed a series of fault scarps.The 43ka, 20ka and 11ka ages of the alluvial fan surfaces in this area can be well compared with the ages of terraces and alluvial fan surfaces in the northeastern margin of Tibetan Plateau, and its formation is mainly controlled by climatic factors. Based on the vertical dislocations of the alluvial fans in different periods in Baijingtu and Xujixiang areas, the average vertical slip rate of the southern Zongwulong Shan Fault since late Quaternary is(0.41±0.05)mm/a, and the average horizontal shortening rate is 0.47~0.80mm/a, accounting for about 10% of the crustal shortening in Qilian Shan. These results are helpful to further understand the strain distribution model in Qilian Shan and the tectonic deformation mechanism in the northern margin of Qaidam Basin. The deformation mechanism of the northern Qaidam Basin fault zone, which is composed of the southern Zongwulong Shan Fault, is rather complicated, and it is not a simple piggy-back thrusting style. These faults jointly control the tectonic activity characteristics of the northern Qaidam Basin.     

Kinematical and Structural Patterns of the Yingjing-Mabian- Yanjin Thrust Fault Zone, Southeast of the Qinghai-Xizang （Tibet） Plateau and Its Segmentation from Earthquakes

INTRODUCTIONThe Yingjing-Mabian-Yanjinthrust fault zone lies on the southeastern margin of Tibet .It startsfromthe south of Tianquaninthe north,and it extends southwards through Yingjing, Emei , Ebian,Mabian,Lidian to the north of Yanjin of Yunnan, with a total length of 275 km. The fault zoneintersects withthe southernsegment of the Longmengshanthrust fault zone onits northernsegment andborders the Huayingshan-Lianfengfault zone onits southernsegment .It is a 30 km-wide NW-trendin…     

GEOMETRY AND DEFORMATION TRANSFORMATION OF THE XIMALIN FAULT

The Ximalin fault is the northwest section of the Ximalin-Shuiquan fault, which is part of the north-edge fault zone of the Yanghe Basin, located in the conjunction of the Zhangjiakou-Bohai fault zone and Shanxi fault-depression basin, and its structural geometry and deformation characteristics can facilitate the research on the interaction of the two tectonic belts. In this paper, data of geological surveys and geophysical exploration are used to study this fault exhaustively, concerning its geometry, structural features and activity as well as its relationship with adjacent faults and rule in the deformation transform of the north-edge fault zone of the Yanghe Basin. The results show that the Ximalin Fault is a strike-slip feature with thrust component. Its vertical slip rates are 0.17mm/a and 0.25~0.38mm/a, and the horizontal slip rate is 0.58~0.67mm/a and 0.50mm/a during the late Middle Pleistocene and Holocene, respectively. It is formed alternately by the NW-trending main faults and secondary NE-trending faults, of which the former is characterized by high-angle reverse with sinistral strike-slip, and the latter shows normal faulting. The two sets of structures have specific structural geometry relations, and the motion manners and deformation characteristics match each other. During the active process of the north-edge fault of the Yanghe Basin, the NW trending Ximalin fault played a role similar to a transform fault in deformation change and stress transfer, and its sinistral strike slip activity accommodated the NE trending normal faulting at the both ends.     

1966年邢台强震群震前、 同震和震后断层运动特征分析

在1966年3月邢台强震群水准观测基础上, 本文首先对同震位移和数值模拟结果进行了对比, 认为邢台强震群发震断层浅层是牛家桥阳断层和永福庄断层, 深部发震断层是倾向北西的北东向断层; 然后以区域水准观测为约束, 通过反演给出了邢台强震群震前断层无震滑移、 同震断层位错和震后断层余滑空间分布。 结果表明, 震前显著无震滑移主要发生在3月8日6.8级前震的发震断层上, 而3月20日宁晋7.2级和6.7级地震发震断层深部同震位错相对弱的断层段, 震前也存在较为明显的无震滑移; 震后断层余滑主要分布在束鹿凹陷西侧的牛家桥阳断层。 从邢台强震群过程中断层运动时空演化特征可以看出, 强震破裂成核过程中震前断层无震滑移既可能发生于前震发震断层, 也可能发生于主震发震断层, 震后断层位移空间分布与同震位错具有互补性; 而震前断层无震滑移是否为有关震前前兆的真正原因, 是值得进一步深入研究的问题。     

late quaternary activity of the qujiang fault and analysis of the slip rate

The Qujiang Fault is one of the most seismically active faults in western Yunnan, China and is considered to be the seismogenic fault of the 1970 M_S7.7 Tonghai earthquake. The Qujiang Fault is located at the southeastern tip of the Sichuan-Yunnan block. In this study, we examine the geometry, kinematics, and geomorphology of this fault through field observations and satellite images. The fault is characterized by dextral strike-slip movements with dip-slip components and can be divided into northwest and southeast segments according to different kinematics. The northwest segment shows right-lateral strike-slip with normal components, whereas it is characterized by dextral movements with the northeast wall thrusting over the opposite in the southeast segment. The offset landforms are well developed along the strike of the fault with displacements ranging from 3.7m to 830m. The Late Quaternary right-lateral slip rate was determined to be 2.3～4.0mm/a through dating and measuring on the offset features. The variation of the slip and uplift rates along the fault strike corresponds well to the fault kinematics segmentation: the slip rate on the northwest segment is above 3mm/a with an uplift rate of 0.6～0.8mm/a; however, influenced by the Xiaojiang Fault, the southeast segment shows apparent thrust components. The slip rate decreases to below 3.0mm/a with an uplift rate of 1.1mm/a, indicating different uplift between the northwest and southeast segments.     

郯庐断裂带白山-卅铺段第四纪以来的活动习性

根据构造地貌遥感解析,发现郯庐断裂带沿庐江白山到桐城卅铺一线显示1组平行断层,现场地震地质调查验证其为1组活动断层。通过断层剖面观测、样品采集及样品测试分析和宏微观构造分析,结果表明,郯庐断裂带在白山—卅铺一带第四纪以来仍具有黏滑、蠕滑交替的变形活动。其中,在柯坦—卅铺一带,最年轻的水系被NE向断层组右旋扭折,其断层物质的微观观测和测龄结果表明该断裂段第四纪时的活动具有脆、塑性过渡变形特征,强烈活动时间处于早、中更新世;而白山剖面断层泥年龄测试结果则反映相应断层段在中、晚更新世曾有过较强烈的活动。断层泥超微(SEM)和显微观测结果亦表明该断裂段曾发生黏滑、蠕滑交替的构造变形事件,且表现为先黏滑后蠕滑;结合水系呈现缓慢扭折表征,近年来沿断裂有不少微震发生,表明郯庐断裂带在白山—卅铺段的最新滑移方式主要表现为蠕滑,也就是说,该段积累的应力以蠕滑或微震等方式缓慢释放,据此推测未来一定时期内不易孕育强烈地震     

Internal structures and high-velocity frictional properties of a bedding-parallel carbonate fault at Xiaojiaqiao outcrop activated by the 2008 Wenchuan earthquake

This paper reports internal structures of a bedding-parallel fault in Permian limestone at Xiaojiaqiao outcrop that was moved by about 0.5 m during the 2008 M_W7.9 Wenchuan earthquake. The fault is located about 3 km to the south from the middle part of Yingxiu-Beichuan fault, a major fault in the Longmenshan fault system that was moved during the earthquake. The outcrop is also located at Anxian transfer zone between the northern and central segments of Yingxiu-Beichuan fault where fault system is complex. Thus the fault is an example of subsidiary faults activated by Wenchuan earthquake. The fault has a strike of 243° or N63°E and a dip of 38°NW and is nearly optimally oriented for thrust motion, in contrast to high-angle coseismic faults at most places. Surface outcrop and two shallow drilling studies reveal that the fault zone is several centimeters wide at most and that the coseismic slip zone during Wenchuan earthquake is about 1 mm thick. Fault zone contains foliated cataclasite, fault breccia, black gouge and yellowish gouge. Many clasts of foliated cataclasite and black gouge contained in fault breccia indicate multiple slip events along this fault. But fossils on both sides of fault do not indicate clear age difference and overall displacement along this fault should not be large. We also report results from high-velocity friction experiments conducted on yellowish gouge from the fault zone using a rotary shear low to high-velocity frictional testing apparatus. Dry experiments at normal stresses of 0.4 to 1.8 MPa and at slip rates of 0.08 to 1.35 m/s reveal dramatic slip weakening from the peak friction coefficient of around 0.6 to very low steady-state friction coefficient of 0.1-0.2. Slip weakening parameters of this carbonate fault zone are similar to those of clayey fault gouge from Yingxiu-Beichuan fault at Hongkou outcrop and from Pingxi fault zone. Our experimental result will provide a condition for triggering movement of subsidiary faults or off-fault damage during a large earthquake.