Evidence Of Dynamical Coupling Between The Residual Layer And The Developing Convective Boundary Layer

The diurnal cycle of the atmospheric boundary layer (ABL) hasbeen documented on 8 August 1998 in the framework of the Étude et Simulation de la QUalité de l'air en Ile-de-France (ESQUIF) experiment that took place in the Paris area. The ABL structure was documented by means of a ground-based lidar, surface meteorological stations and soundings. The interaction between the residual layer and the convective boundary layer is investigated using the collected data as well as mesoscale modelling. As opposed to the generally accepted concept, we find evidence of entrainment at the top ofthe residual layer. High temporal simulations of the 8 August 1998 casemade with the mesoscale atmospheric model Meso-NH also show evidenceof mixing at the top of the residual layer (RL). This mixing is believed to be related to the presence of convective (gravity) waves in the RL.     

Growth Of The Summer Daytime Convective Boundary Layer At Anand

The heights of the daytime convective boundary layer (CBL), computed by a one-dimensional model for a bare soil surface at a semi-arid station,Anand, during the dry and hot summer month of May 1997, are presented. As input, the model requires surface heat flux, friction velocity and air temperature as functions of time. Temperature data at the one-metre level from a tower and sonic anemometer data at 9.5 m collected during the period 13–17 May 1997 in the Land Surface Processes Experiment (LASPEX-97) are used to compute hourly values of surface heat flux, friction velocity and Obukhov length following the operational method suggested by Holtslag and Van Ulden [J. Climate Appl. Meteorol. 22,517–529 (1983)]. The model has been tested with different values for the potential temperature gradient ( ) above the inversion. The model-estimated CBL heights comparefavourably with observed heights obtained from radiosonde ascents.     

Observations Of The Morning Transition Of The Convective Boundary Layer

The morning transition between the stable nocturnal situation and the daytime convective boundary layer (CBL) is of interest both for basic understanding and for initializing prognostic models. While the morning growth phase of the CBL has been studied in detail, relatively little has been published on the transition itself. In this paper, conventional observations of surface temperature, humidity, and turbulent fluxes,and data from a meteorological tower, are combined with measurements of the onset of convection by boundary-layer wind profilers to explore the timing and behaviour of the transition period. The transition is defined here as the period between sunrise and the time at which the depth ofconvection reaches about 200 m AGL. Diagnostic relationships based on surface heat flux, the temperature difference between 2 m and 200 m, and bulk Richardson number are explored. The transition is foundto be enabled by surface heating relaxing the surface stability, while the warming of the layerbetween 2 m and 200 m is in large part due to shear-driven entrainment.     

A Comparison Of Aerosol-Layer And Convective Boundary-Layer Structure Over A Mountain Range During Staaarte '97

The temporal evolution and spatial structure of the aerosol layer (AL) height as observed with an airborne downlooking lidar over the Swiss Alps were investigated with a three-dimensional mesoscale numerical model and a particle dispersion model. Convective boundary-layer (CBL) heights were derived from the mesoscale model output, and the behaviour of surface-released particles was investigated with the particle dispersion model. While a previous investigation, using data from the same field study, equated the observed AL height with the CBL height, the results of the current investigation indicate that there is a considerable difference between AL and CBL heights caused by mixing and transport processes between the CBL and the free atmosphere. CBL heights show a more terrain-following behaviour and are lower than AL heights. We argue that processes causing the difference between AL and CBL heights are common over mountainous terrain and that the AL height is a length scale that needs to be considered in air pollution studies in mountainous terrain.     

Fluid Modelling Of Atmospheric Dispersion In The Convective Boundary Layer

A laboratory convection tank has been established following thepioneering work of Willis and Deardorff, but with many improvements and enhancements thattake advantage of modern technology. The main emphasis in the current design was toprovide the ability to conduct a virtually unlimited number of realizations under essentiallyidentical conditions in order to obtain reliable statistics on the dispersion of plumes and puffsreleased within the simulated atmospheric convective boundary layer. Described herein is the tankitself and its auxiliary systems, including a laser-induced-fluorescence and video-imaging system for makingnon-intrusive, full-field measurements of concentrations, and the interfacing of varioussubsystems with a master controller that automates essentially all operation and measurement functions.The current system provides unprecedented resolution, control, and data volumes. Exampleresults are presented from two types of releases: continuous plumes and instantaneous puffs.These data sets clearly show penetration of the highly buoyant plumes and puffs into theinversion above the convective boundary layer, gravity spreading within the inversion, andrapid diffusion within the mixed layer. They also show extreme `spottiness' in the instantaneousconcentration cross-sections.     

Aircraft Observations Of The Mean And Turbulent Structure Of A Shallow Boundary Layer Over The Persian Gulf

Stable internal boundary layers form when warm air isadvected over a cooler surface, a common occurrence incoastal areas. The internal boundary layer deepenswith distance along-wind, eventually reachingequilibrium with the surface and becoming a fullydeveloped marine boundary layer. We presentobservations of the late stages of internalboundary-layer evolution made bythe U.K. Meteorological Office'sC-130 Hercules research aircraft over the Persian Gulfin April 1996. Northwesterly winds brought warm dryair from the surrounding desert landmass across thecooler waters of the Gulf. Loss of heat to the surfaceresulted in the formation of a shallow, stableinternal boundary layer downwind of the coast. The aircraftmeasurements were made several hundred kilometresdownwind, by which point the original deep convectiveboundary layer had been eroded away and the internalboundary layer was well developed, effectively a newmarine atmospheric boundary layer. Throughout most ofits depth the boundary layer was statically stable anda downward heat flux of approximately 15 W m^-2was observed; however, an exceptionally strong latentheat flux, in excess of 250 W m^-2 near thesurface, was sufficient to overcome the downwards heatflux and maintain weak buoyant convection in the lower30–50% of the boundary layer.Scaling of boundary-layer turbulence statistics usinglocal similarity theory produces results in agreementwith previous studies. Because of the strong humiditycontribution to the buoyancy flux, however, care isrequired with the definition of the similarity scales.It is usual for either the sensible heat or buoyancyflux to be used in the definitions of both thetemperature and length scales; the latter being usedover water where humidity plays a significant role indetermining stability. In the present case we findthat while the buoyancy flux is appropriate in thedefinition of the length scale, the temperature scalemust be defined in terms of the sensible heat flux.     

Forward-in-time and Backward-in-time Dispersion in the Convective Boundary Layer: the Concentration Footprint

The turbulence field obtained using a large-eddy simulation model is used to simulate particle dispersion in the convective boundary layer with both forward-in-time and backward-in-time modes. A Lagrangian stochastic model is used to treat subgrid-scale turbulence. Results of forward dispersion match both laboratory experiments and previous numerical studies for different release heights in the convective boundary layer. Results obtained from backward dispersion show obvious asymmetry when directly compared to results from forward dispersion. However, a direct comparison of forward and backward dispersion has no apparent physical meaning and might be misleading. Results of backward dispersion can be interpreted as three-dimensional or generalized concentration footprints, which indicate that sources in the entire boundary layer, not only sources at the surface, may influence a concentration measurement at a point. Footprints at four source heights in the convective boundary layer corresponding to four receptors are derived using forward and backward dispersion methods. The agreement among footprints derived with forward and backward methods illustrates the equivalence between both approaches. The paper shows explicitly that Lagrangian simulations can yield identical footprints using forward and backward methods in horizontally homogeneous turbulence.     

A Simple Model Of The Convective Internal Boundary Layer And Its Application To Surface Heat Flux Estimates Within Polynyas

A simple model of the convective (thermal) internalboundary layer has been developed for climatologicalstudies of air-sea-ice interaction, where in situobservations are scarce and first-order estimates ofsurface heat fluxes are required. It is amixed-layer slab model, based on a steady-statesolution of the conservation of potentialtemperature equation, assuming a balance betweenadvection and turbulent heat-flux convergence. Boththe potential temperature and the surface heat fluxare allowed to vary with fetch, so the subsequentboundary-layer modification alters the fluxconvergence and thus the boundary-layer growth rate.For simplicity, microphysical and radiativeprocesses are neglected.The model is validated using several case studies.For a clear-sky cold-air outbreak over a coastalpolynya the observed boundary-layer heights,mixed-layer potential temperatures and surface heatfluxes are all well reproduced. In other cases,where clouds are present, the model still capturesmost of the observed boundary-layer modification,although there are increasing discrepancies withfetch, due to the neglected microphysical andradiative processes. The application of the model toclimatological studies of air-sea interaction withincoastal polynyas is discussed.     

The Influence Of Vertical Wind Direction Shear On Dispersion In The Convective Boundary Layer, And Its Incorporation In Coastal Fumigation Models

The mean concentration distributionwithin a plume released from a point source in the atmosphericboundary layer can be greatly influenced by the systematic turningof wind with height (i.e. vertical wind direction shear). Such aninfluence includes a deflection of the plume centroid, with anassociated shearing of the vertical plume cross-section, and anenhancement of dispersion, in the horizontal plane. Wind directionshear is normally not accounted for in coastal fumigation models,although dispersion observations with shear acting as acontrolling parameter are not uncommon. A three-dimensionalLagrangian stochastic model is used to investigate the influenceof uniform wind direction shear on the diffusion of a point-sourceplume within the horizontally homogeneous convective boundarylayer, with the source located at the top of the boundary layer.Parameterisations are developed for the plume deflection andenhanced dispersion due to shear within the framework of aprobability density function (PDF) approach, and compared with theLagrangian model results. These parameterisations are thenincorporated into two applied coastal fumigation models: a PDFmodel, and a commonly used model that assumes uniform andinstantaneous mixing in the vertical direction. The PDF modelrepresents the vertical mixing process more realistically. A moreefficient version of the PDF model, which assumes a well-mixedconcentration distribution in the vertical at large times, isapplied to simulate sulfur dioxide data from the Kwinana CoastalFumigation Study. A comparison between the model results and thedata show that the model performs much better when the wind-sheareffects are included.     

Turbulence Characteristics Of The Stable Boundary Layer Over A Mid-Latitude Glacier. Part Ii: Pure Katabatic Forcing Conditions

Observations obtained over a glacier surface in a predominantlykatabatic flow and with a distinctwind maximum below 13-m height are presented. The data werecollected using a 13-m high profilemast and two sonic anemometers (at about 2.5-m and 10-m heights).The spectra at frequencies belowthat of the turbulence range appear to deviate considerably fromthe curves obtained by Kaimal andco-workers during the 1968 Kansas experiment. The characteristicsof these deviations are compared tothe observations of others in surface-layers disturbed by anykind of large-scale outer-layer (orinactive) turbulence. In our case the disturbances arelikely to be induced by the highmountain ridges that surround the glacier. Moreover, the deviationsobserved in the cospectra seemto result from an, as yet, unspecified interaction between theinactive outer-layer turbulenceand the local surface-layer turbulence. Near the distinctwind maximum turbulence production ceasedwhile turbulence itself did not, probably the result ofturbulence transport from other levels. Consequently, we studied thelocal similarity relations using _w instead of u_* as an alternative velocity scale. Wellbelow the wind maximum, and for relatively low stability(0< Ri_g <0.2), the flow behaves accordingto well established local-scaling similarity relationshipsin the stable boundary layer. For higherstability (Ri_g > 0.2), and near or above the wind maximum, the boundary-layer structure conforms tothat of z-less stratification suggesting that the eddy sizeis restricted by the local stability ofthe flow. In line with this we observed that the sensibleheat fluxes relate remarkably well to thelocal flow parameters.