Architecture and formation of transgressive–regressive cycles in marginal marine strata of the John Henry Member,Straight Cliffs Formation,Upper Cretaceous of Southern Utah,USA

Marginal marine deposits of the John Henry Member, Upper Cretaceous Straight Cliffs Formation, were deposited within a moderately high accommodation and high sediment supply setting that facilitated preservation of both transgressive and regressive marginal marine deposits. Complete transgressive–regressive cycles, comprising barrier island lagoonal transgressive deposits interfingered with regressive shoreface facies, are distinguished based on their internal facies architecture and bounding surfaces. Two main types of boundaries occur between the transgressive and regressive portions of each cycle: (i) surfaces that record the maximum regression and onset of transgression (bounding surface A); and (ii) surfaces that place deeper facies on top of shallower facies (bounding surface B). The base of a transgressive facies (bounding surface A) is defined by a process change from wave‐dominated to tide‐dominated facies, or a coaly/shelly interval indicating a shift from a regressive to a transgressive regime. The surface recording such a process change can be erosional or non‐erosive and conformable. A shift to deeper facies occurs at the base of regressive shoreface deposits along both flooding surfaces and wave ravinement surfaces (bounding surface B). These two main bounding surfaces and their subtypes generate three distinct transgressive – regressive cycle architectures: (i) tabular, shoaling‐upward marine parasequences that are bounded by flooding surfaces; (ii) transgressive and regressive unit wedges that thin basinward and landward, respectively; and (iii) tabular, transgressive lagoonal shales with intervening regressive coaly intervals. The preservation of transgressive facies under moderately high accommodation and sediment supply conditions greatly affects stratigraphic architecture of transgressive–regressive cycles. Acknowledging variation in transgressive–regressive cycles, and recognizing transgressive successions that correlate to flooding surfaces basinward, are both critical to achieving an accurate sequence stratigraphic interpretation of high‐frequency cycles.     

Late Quaternary core stratigraphy of the northern New South Wales continental shelf

On the southeast Australian continental margin, mixed siliciclastic and temperate carbonate sediments are presently forming along the narrow 20–35 km‐wide northern New South Wales shelf over an area of 4960 km². Here, year‐round, highly energetic waves rework inner and mid‐shelf clastic sediments by northward longshore currents or waning storm flows. The strong East Australian Current flows south, sweeping clastic and outer shelf biogenic sands and gravels. Quaternary siliciclastic inner shelf cores consist of fine to medium, lower shoreface sand and graded storm beds of fine to coarse sand. Physically abraded, disarticulated molluscs such as Donacidae and Glycymeridae form isolated gravel lags. Highstand inner shelf clastics accumulate at 0.53 m/10³ y in less than 50 m water depth. Clastic mid‐shelf cores contain well‐sorted, winnowed, medium shoreface sands, with a fine sand component. Fine sand and mud in this area is discharged mainly from New South Wales’ largest river, the Clarence. The seaward jutting of Byron Bay results in weakened East Australia Current flows through the mid‐shelf from Ballina to Yamba allowing the fine sediments to accumulate. Quaternary carbonate outer shelf cores have uniform and graded beds forming from the East Australian Current and are also influenced by less frequent storm energy. Modern clastic‐starved outer shelf hardgrounds are cemented by coralline algae and encrusting bryozoans. Clay‐sized particles are dominantly high‐Mg calcite with minor aragonite and smectite/kaolinite. Carbonate sands are rich in bryozoan fragments and sponge spicules. Distinctive (gravel‐sized) molluscs form isolated shells or shell lag deposits comprising Limopsidae and Pectinidae. The upper slope sediments are the only significant accumulation of surficial mud on the margin (18–36 wt%), filling the interstices of poorly sorted, biogenic gravels. Pectinid molluscs form a basal gravel lag. During highstand the outer shelf accumulates sediment at 0.40 m/10³ y, with the upper slope accumulating a lower 0.23 m/10³ y since transgression. Transgression produced a diachronous (14–10 ka) wave‐ravinement surface in all cores. Relict marine hardgrounds overlie the wave‐ravinement surface and are cemented by inorganic calcite from the shallow and warm East Australian Current. Transgressive estuarine deposits, oxygen isotope Stage 3–5 barriers or shallow bedrock underlie the wave‐ravinement surface on the inner and mid shelf. Northern New South Wales is an example of a low accommodation, wave‐ and oceanic current‐dominated margin that has produced mixed siliciclastic‐carbonate facies. Shelf ridge features that characterise many storm‐dominated margins are absent.     

Lithostratigraphy and depositional environment of the Permian Nowra Sandstone in the southwestern Sydney Basin,Australia

Lithofacies in the mid‐Permian Nowra Sandstone indicate a middle/upper shoreface to foreshore environment of deposition under the influence of storm‐generated waves and north‐northeasterly directed longshore currents. Palaeogeographic reconstruction for the Nowra Sandstone portrays a sand‐dominated high energy shelf and offshore shoal forming a sequence thickening seaward away from the western shore of the Sydney Basin. The shoal‐crest at the outer edge of the shelf trends north‐northeast. It is characterized by fine‐ to medium‐grained sandstone with upper flow regime structures and a high proportion of conglomerate, whereas coarser sandstone with lower energy bedforms occurs along the seaward side of the shoal. In the deeper water to the east, the lower Nowra Sandstone becomes rapidly thinner as it passes seaward, via bioturbated storm redeposited sandstone beds, into the shelf deposits of the Wandrawandian Siltstone. This sequence accumulated during a regressive event and the base of the formation becomes progressively younger eastward. The sand may have been supplied by rivers along the western coast but the major source was south of the study area. The lower Nowra Sandstone is separated from the upper part of the formation by an extensive ravinement surface overlain by the Purnoo Conglomerate Member. In contrast to the lower unit, the upper Nowra Sandstone forms a westward thickening wedge that represents a backstepping nearshore sand facies that accumulated during a transgression. The upper Nowra Sandstone passes vertically and laterally eastward into the Berry Siltstone. Thus both boundaries of the Nowra Sandstone are diachronous, first younging eastward and then westward as a response to a regressive‐transgressive episode.     

Sequence stratigraphy in the context of rapid regional uplift and high‐amplitude glacio‐eustatic changes: the Pleistocene Cutro Terrace (Calabria,southern Italy)

The Cutro Terrace is a mixed marine to continental terrace, where deposits up to 15 m thick discontinuously crop out in an area extending for ca 360 km² near Crotone (southern Italy). The terrace represents the oldest and highest terrace of the Crotone area, and it has been ascribed to marine isotope stage 7 (ca 200 kyr bp ). Detailed facies and sequence‐stratigraphic analyses of the terrace deposits allow the recognition of a suite of depositional environments ranging from middle shelf to fluvial, and of two stacked transgressive–regressive cycles (Cutro 1 and Cutro 2) bounded by ravinement surfaces and by surfaces of sub‐aerial exposure. In particular, carbonate sedimentation, consisting of algal build‐ups and biocalcarenites, characterizes the Cutro 1 cycle in the southern sector of the terrace, and passes into shoreface and foreshore sandstones and calcarenites towards the north‐west. The Cutro 2 cycle is mostly siliciclastic and consists of shoreface, lagoon‐estuarine, fluvial channel fill, floodplain and lacustrine deposits. The Cutro 1 cycle is characterized by very thin transgressive marine strata, represented by lags and shell beds upon a ravinement surface, and thicker regressive deposits. Moreover, the cycle appears foreshortened basinwards, which suggests that the accumulation of its distal and upper part occurred during forced regressive conditions. The Cutro 2 cycle displays a marked aggradational component of transgressive to highstand paralic and continental deposits, in places strongly influenced by local physiography, whereas forced regressive sediments are absent and probably accumulated further basinwards. The maximum flooding shoreline of the second cycle is translated ca 15 km basinward with respect to that of the first cycle, and this reflects a long‐term regressive trend mostly driven by regional uplift. The stratigraphic architecture of the Cutro Terrace deposits is the result of the interplay between regional uplift and high amplitude, Late Quaternary glacio‐eustatic changes. In particular, rapid transgressions, linked to glacio‐eustatic rises that outpaced regional uplift, favoured the accumulation of thin transgressive marine strata at the base of the two cycles. In contrast, the combined effect of glacio‐eustatic falls and regional uplift led to high‐magnitude forced regressions. The superposition of the two cycles was favoured by a relatively flat topography, which allowed relatively complete preservation of stratal geometries that record large shoreline displacements during transgression and regression. The absence of a palaeo‐coastal cliff at the inner margin of the terrace supports this interpretation. The Cutro Terrace provides a case study of sequence architecture developed in uplifting settings and controlled by high‐amplitude glacio‐eustatic changes. This case study also demonstrates how the interplay of relative sea‐level change, sediment supply and physiography may determine either the superposition of cycles forming a single terrace or the formation of a staircase of terraces each recording an individual eustatic pulse.     

The Sedimentary Sequence and Palaeogeographic Changes of the South Yellow Sea Since the Olauvai Subchron1

Abstract According to the alternation of terrestrial beds and transgressive beds, the sedimentary sequence of the South Yellow Sea since the Olduvai subchron can be divided into 15 strdatigraphical intervals. According to the facies analysis, there are 7 transgressive beds an one bed with transgression marks, and classical transgressive-regressive facies sequence also appears in the major transgressive beds. Palaeogeographic evolution in the shelf area involved 4 periods: (1) 1.70-0.5 Ma B. P. was the stage for the development of the Palaeo-Yangtze River alluvial plain and delta. Tide influenced-river channel sediments formed during the Olduvai have been found in borehole QC2. The river mouth was located near 124° E and during the transgressive stage from 0.97-0.73 Ma B.P. to the east of 122.2° E, a large-scale undersea delta was formed. In the regressive stage, the shelf area became an alluvial plain. (2) 0.50-0.75 Ma B.P. was a multi-transgressive fluctuation stage during which 3 transgressive beds (HVI, HV, HIV)developed, being dated as 0.50-0.30 Ma B.P., 0.27-0.20 Ma B.P. and 127-75 Ka B.P. respectively, with the extent of transgression increasing gradually. Influenced by southeast monsoons, the eastern China continent began to have a larger moisture source. (3) 75–14 Ka B.P. was the lower sea-level stage during the last glacial period. The downcuttihg depth of rivers was up to -133 m. The palaeo-Yangtze River system flowed northeastwards into the Sea of Japan through the Sea of Japan through the Tsushima and Korean Straits. The interfluvial area became an eroded, weathered high land. In the cores, two short-lived, relatively high sea-level stages were recorded, corresponding to two interstades in the last glacial period. (4) The period since 14 Ka B.P. is the stage for “Holocene transgression” and the development of the Yellow River-Huaihe River delta. Before 14 Ka the sea level rose to -68 m, and before 11 Ka to -50 m, and the sea-level was once at a standstill or slightly got down, which is coincident with the Younger Dryas event. The Yellow River-Huaihe River delta developed on transgressive bed HI and consists of the superimpositions of 6 deltaic complexes.     

Late-Quaternary paleoenvironmental evolution of Lesina lagoon (southern Italy) from subsurface data

Integrated sedimentological and micropaleontological (foraminifers and ostracods) analyses of two 55 m long borehole cores (S3 and S4) drilled in the subsurface of Lesina lagoon (Gargano promontory—Italy) has yielded a facies distribution characteristic of alluvial, coastal and shallow-marine sediments. Stratigraphic correlation between the two cores, based on strong similarity in facies distribution and AMS radiocarbon dates, indicates a Late Pleistocene to Holocene age of the sedimentary succession.Two main depositional sequences were deposited during the last 60-ky. These sequences display poor preservation of lowstand deposits and record two major transgressive pulses and subsequent sea-level highstands. The older sequence, unconformably overlying a pedogenized alluvial unit, consists of paralic and marine units (dated by AMS radiocarbon at about 45–50,000 years BP) that represent the landward migration of a barrier-lagoon system. These units are separated by a ravinement surface (RS1). Above these tansgressive deposits, highstand deposition is characterised by progradation of the coastal sediments.The younger sequence, overlying an unconformity of tectonic origin, is a 10 m-thick sedimentary body, consisting of fluvial channel sediments overlain by transgressive–regressive deposits of Holocene age. A ravinement surface (RS2), truncating the transgressive (lagoonal and back-barrier) deposits in core S4, indicates shoreface retreat and landward migration of the barrier/lagoon system. The overlying beach, lagoon and alluvial deposits are the result of mid-Holocene highstand sedimentation and coastal progradation.     

Non-uniform across-shelf variations in thickness, grain size, and frequency of turbidites in a transgressive outer-shelf, the Middle Pleistocene Kakinokidai Formation, Boso Peninsula, Japan

Across-shelf variations in thickness, grain size, and frequency of sandstone beds in a transgressive outer-shelf succession were investigated from the Middle Pleistocene (ca. 0.7 Ma) Kakinokidai Formation on the Boso Peninsula, Japan. The transgressive deposits are generally muddy and contain slumps and slump scars. The intercalated sandstone beds are interpreted to have been formed from turbidity currents as a response to erosion and resuspension of sandridge-complex deposits in the southwestern upslope area during storm events. Mapping of volcanic ash beds and a transgressive surface in the base of the formation permits detailed bed-by-bed correlation of the outer-shelf sandstone beds. Although, overall, thickness, grain size, and frequency of sandstone beds decrease in the downslope direction, some sandstone beds locally thin out and coarsen in association with slump scars in the surrounding muddy deposits. These sandstone beds subsequently thicken and fine, and finally thin out in the farther downslope area. In addition to the local thinning of sandstone beds, the frequency of sandstone beds first decreases and then increases in the farther offshore direction. From this evidence, we concluded that these non-uniform patterns of across-outer-shelf variations in thickness, grain size, and frequency of sandstone beds were caused by the local increases in flow speeds and subsequent expansion and reduced speeds of turbidity currents, along with a local increase in the seafloor gradient that was induced by the development of slump scars in the transgressive outer-shelf floor. These physiographic features in the outer shelf are interpreted not to have permitted monotonous downslope thinning and fining of sandstone beds, compared with the bed-shape models of depletive turbidity currents and with the proximality trend of shelf sandstones from modern and ancient highstand-stage shelf systems.     

Holocene transgression of the Rhine river mouth area,The Netherlands/Southern North Sea: palaeogeography and sequence stratigraphy

This study presents a detailed reconstruction of the palaeogeography of the Rhine valley (western Netherlands) during the Holocene transgression with systems tracts placed in a precise sea‐level context. This approach permits comparison of actual versus conceptual boundaries of the lowstand, transgressive and highstand systems tracts. The inland position of the highstand Rhine river mouth on a wide, low‐gradient continental shelf meant that base‐level changes were the dominant control on sedimentation for a relatively short period of the last glacial cycle. Systems in such inland positions predominantly record changes in the balance between river discharge and sediment load, and preserve excellent records of climatic changes or other catchment‐induced forcing. It is shown here that the transgressive systems tract‐part of the coastal prism formed in three stages: (i) the millennium before 8·45 ka bp , when the area was dominated by fluvial environments with extensive wetlands; (ii) the millennium after 8·45 ka, characterized by strong erosion, increasing tidal amplitudes and bay‐head delta development; and (iii) the period between 7·5 and 6·3 ka bp when the Rhine avulsed multiple times and the maximum flooding surface formed. The diachroneity of the transgressive surface is strongly suppressed because of a pulse of accelerated sea‐level rise at 8·45 ka bp . That event not only had a strong effect on preservation, but has circum‐oceanic stratigraphical relevance as it divides the early and middle Holocene parts of coastal successions worldwide. The palaeogeographical reconstruction offers a unique full spatial–temporal view on the coastal and fluvial dynamics of a major river mouth under brief rapid forced transgression. This reconstruction is of relevance for Holocene and ancient transgressive systems worldwide, and for next‐century natural coasts that are predicted to experience a 1 m sea‐level rise.     

香港海域全新世地层及风暴潮的建造作用

香港全新世地层中发现有6种沉积构造类型,包括:1)隐构造淤泥层(SM型)、2)砂质粒序层(GS型)、3)层理状沉积层(L型)、4)贝屑粒序层(GSh型)、5)无序贝屑层(USh型)和6)均一粉砂层(SS型)。其中,后5种类型与风暴潮有关。沉积物的粒度分布有7种类型。其中,双峰型粒度分布与风暴潮对海底沉积物的悬浮和再分配密切相关。贝壳的破碎度可指示沉积物受改造的程度。沉积构造受改造的程度主要取决于沉积速率和生物扰动。     

唐古拉山中侏罗统缅甸光牡蛎(Liostrea birmanica REED)壳层的事件沉积成因及其环境意义

唐古拉山地区中侏罗统产出丰富的牡蛎类化石,特别是缅甸光牡蛎Liostrea bir—manica Reed分布更为广泛,而且多以介壳层形式产出。在唐古拉山的冬曲,窝布茸曲及青藏公路108道班等地剖面上,栖息于软基底的表生底栖双壳类Liostrea birmanica形成近原地埋葬的介壳层堆积;内生的Ceratomya动物群则多散布于沉积物中,形成原地埋葬的化石群．它们和以丛藻迹Chondrites为主体的遗迹化石群依次重复出现,构成一个和风暴沉积事件相关的底栖动物群替代序列。Liostrea birmanica介壳层是风暴高峰期的侵蚀和再沉积所形成的,风暴期以后水下沉积间断所形成的轻度固化的软基底则迅速地被潜穴生物占领(丛藻迹Chondrites ich—nosp．和根珊瑚迹Rhizocorallium ichnoSp．);而以深挖穴滤食类型为主的Ceralomya组合则是好天气时的原地埋葬。在大多数情况下,它们指示着介于正常浪基面以下,风暴浪基面以上的低沉积速率浅水碳酸岩台地沉积环境。     

Postglacial stratigraphic evolution of a current-influenced sandy shelf: offshore Kujukuri strandplain,central Japan

Sandy shelf sediments are important elements of clastic sedimentary systems because of their wide distribution in the geological record and their significance as hydrocarbon reservoirs. Although many studies have investigated shelf sediments influenced by waves or tidal currents, little is known about shelf sediments influenced by oceanic currents, particularly their lithofacies characteristics and stratigraphic evolution. This study investigated the stratigraphic evolution of shelf sediments off the Kujukuri strandplain facing the Pacific Ocean, which is influenced by the strong Kuroshio Current. Sediment cores were obtained from six locations on the Kujukuri shelf (34 to 124 m water depth) using a vibrocorer. The dominant lithofacies is mud-free sand with low-angle cross-lamination associated with alternating beds of finer and coarser sand with cross-lamination. These display depositional processes influenced by storm waves and the Kuroshio Current, respectively. This finding is consistent with the previously presented modern and historical observations of the Kuroshio Current and estimates of the storm-wave base. Radiocarbon dates show that the sediment succession formed during the last transgressive and highstand stages after 13·1 ka. The depositional processes during the stages represent a transition from storm waves with abundant sediment supply to both storm waves and the Kuroshio Current with sediment starvation mainly due to its trapping in the strandplain. Comparison to other Holocene–Modern shelf systems suggests that the sandy shelf successions are strongly influenced by oceanic currents under conditions of limited riverine input and open coastal geometry. The resultant sand-dominated succession is characterized by reversal of the proximal to distal grain-size trend compared to the fining for most other recognized wave/storm-dominated shelf successions. This is because of seaward increase in the influence of the Kuroshio Current. Thus, shelf deposits are naturally complex, and these may be further complicated by the additional influence of oceanic currents above the usual wave-dominated and tide-dominated end members.     

High resolution stratigraphy and facies differentiation of the shallow marine Annot Sandstones, south-east France

High resolution stratigraphical analysis divides a rock succession into the basic genetic units of stratigraphy which are here termed small scale stratigraphical cycles. Each cycle records the sedimentological response to an episode of shallowing and deepening. Assuming that these changes in water depth reflect changes in the shoreline position, they can be considered as regressive/transgressive episodes. Each cycle comprises a regressive and transgressive facies tract which will be variably proportioned; in some examples a facies tract may only be represented by a hiatal surface of no deposition, erosion and/or bypass. In the Annot Sandstones of south-east France, variations in facies types, proportions and associations can be demonstrated both laterally and vertically through the succession. First, it is demonstrated that facies variations occur within regressive or transgressive facies tracts as a function of the stratigraphical stacking pattern of the cycles (i.e. landward, vertical or seaward stacked); this is termed ‘vertical facies differentiation’. Second, the proportions of facies tracts and their constituent facies types within an individual cycle vary between more landward and more seaward palaeogeographical locations; this is termed ‘lateral facies differentiation'. The upper Eocene/lower Oligocene Annot sandstones outcrop in the Maritime Alps of south-east France, within the thin skinned outer fold and thrust belt of the Alpine arc. The sandstones are well exposed in the area of the Col de la Cayolle on the north-west margin of the Argentera Massif, where lithostratigraphical correlations are possible over 3·5 km in a NNW/SSE direction, perpendicular to the edge of the depositional basin. Traditionally, these outcrops have been interpreted as deep marine turbidite lobe sediments; this study reflects a significant reinterpretation of this succession as having been deposited in a shallow marine environment. Seven sedimentary sections were measured through the succession, which is divided into 10 small scale stratigraphical cycles. These cycles are described in terms of eight facies which are separated into their transgressive or regressive facies tracts. In eight of the 10 cycles, the regressive facies tracts reflect the progradation of storm influenced braid deltas over shelf muds and silts. In two of the 10 cycles, the regressive facies tracts reflect barrier inlet and wash-over sands interfingering with back barrier deposits. These latter two cycles are located within landward stepping cycle sets; this is an example of vertical facies differentiation. Transgressive facies tracts locally reworked the upper surface of the regressive facies tract and also comprise barrier and back barrier deposits. The facies succession within each cycle varies according to its position with respect to the palaeoshoreline. The more landward portion of an individual cycle comprises a deltaic shoaling upward succession, culminating in coarse distributary channel conglomerates, overlain by a transgressive barrier/inlet system with extensive back barrier deposits. Beyond the delta front, the more seaward equivalent of individual cycles comprises an erosive base, with aggradational massive pebbly sandstones sitting directly upon offshore heterolithics; these sandstones are interpreted as hyperconcentrated fluvial efflux into the nearshore environment. This grades upward into offshore heterolithics and graded storm deposits representing the products of ravinement, which are then overlain by shelf mudstones. In summary, the more landward portions of cycles preserve predominantly regressive facies tracts, whereas the more seaward portions preserve aggradational to retrogradational strata of the transgressive facies tract; this is an example of lateral facies differentiation.     

Sedimentary response to Late Quaternary sea-level changes in the Romagna coastal plain (northern Italy)

Data from 17 continuously cored boreholes, 40–170 m deep, reveal the subsurface stratigraphy of the Romagna coastal plain. Sedimentological and microfaunal data allow the distinction of eight facies associations of Late Pleistocene–Holocene age, including 18 lithofacies and 16 faunal associations. Ten ¹⁴C dates provide the basis to establish a sequence stratigraphic framework for the succession corresponding to the upper part 35 ky BP of the last glacio-eustatic cycle. The eight facies associations can be grouped into lowstand, transgressive and highstand systems tracts. The upper part of the lowstand systems tract consists of alluvial plain deposits. These accumulated during the Late Pleistocene when the shoreline was ≈250 km south of its present-day position. A pronounced stratigraphic hiatus (between 25 and 8·8 ky BP) is invariably recorded at the upper boundary (transgressive surface) of these Pleistocene, indurated and locally pedogenized alluvial deposits. The succeeding postglacial history is represented by a well developed transgressive–regressive cycle. Transgressive deposits, interpreted to reflect the rapid landward migration of a barrier–lagoon system, include two wedge-shaped, paralic and marine units. These thicken in opposite directions and are separated by a ravinement surface. Above the transgressive deposits, the maximum flooding surface (MFS) marks the change from a transgressive barrier–lagoon complex to a prograding, wave-dominated delta system (early Po delta). The MFS can be traced landwards, where it constitutes the base of lagoonal deposits. An aggradational to progradational stacking pattern of upper delta plain (marsh), lower delta plain (lagoon/bay), and delta front (beach ridge) deposits reflects the progressive increase in the sediment supply/accommodation ratio during the following highstand. The alluvial deposits capping the sequence accumulated by the 13th century AD, in response to an avulsion event that caused abandonment of the former Po delta lobe and the northward migration of the Po River towards its present position.     

Signatures of storms, oceanic floods and forearc tectonism in marine shelf strata of the Quinault Formation (Pliocene), Washington, USA

Marine shelf strata of the Quinault Formation reflect the influences of storm–flood processes and convergent margin tectonism on sedimentation and palaeocommunity distributions in an active forearc basin of Early Pliocene age, western Washington, USA. The sedimentologic, ichnologic and invertebrate megafaunal character of coastal sea cliff exposures in the Pratt Cliff–Duck Creek area, Quinault Indian Nation, reveal five different sedimentary facies – scoured, Rosselia, bioturbated, mixed and Acharax. These facies document the shifting interplay and intensities among storms, waves and river‐flood plumes during transgression in inner to mid‐shelf settings. Storm sedimentation on the inner shelf is recorded north of Pratt Cliff by amalgamated, proximal tempestites of the scoured facies, which grade up‐section to thick deposits of hummocky cross‐stratified sandstone, indicative of strong wave influences. These hummocky beds alternate, in metre‐scale packages, with banded mudstone and siltstone that have distinctive sedimentologic and ichnofaunal characteristics (Rosselia facies). In particular the mudstone and siltstone occur as 1–15 cm‐thick, rhythmic, parallel beds that are laterally continuous, internally homogeneous to faintly laminated, and thus similar in nature to fine‐grained, oceanic flood deposits reported from shelf settings offshore the modern Eel River, northern California. The Quinault flood deposits are dominated by the ubiquitous trace fossil Rosselia socialis, comprising vertical, mud‐packed, flaring burrows with a sand‐filled central shaft which has been inferred as the feeding‐dwelling structure of a vermiform invertebrate adapted to high sedimentation rates in inner‐shelf settings. Fairweather conditions in between the higher energy periods of storms, waves and floods are recorded north of Pratt Cliff by the mixed facies, which is interpreted as representing the sand and mud zone of the inner‐ to mid‐shelf transition. Quieter, deeper, mid‐shelf, fairweather settings are typified by the bioturbated facies south of Pratt Cliff, where lower sedimentation rates and lower physical energies produced extensively bioturbated deposits of sandy siltstone punctuated, in places, by isolated sandy beds of distal tempestites. Quinault strata also chronicle stratigraphic signatures of subduction of the Juan de Fuca plate beneath western Washington during the Pliocene. For example, the imprint of geochemically unusual authigenic carbonates and a chemosynthetic palaeocommunity (Acharax facies) have been interpreted as a methane seep on the Quinault seafloor. Furthermore, a mobile rockground epifauna of pholadid bivalves became established on abundant, dark mudstone cobbles and pebbles sourced from the Hoh Assemblage, a Miocene accretionary prism that was actively deforming as well as interacting with Quinault forearc sediments during the Pliocene. Hoh mudstone clasts were supplied to the Quinault shelf via seafloor‐piercing diapirs and eroding mélange shear zones, exposures of which today occur in fault contact with Quinault strata along the coast from Taholah to the Raft River.     

Sedimentology and stratigraphy of a transgressive, muddy gravel beach: Waterside Beach, Bay of Fundy, Canada

Sediments exposed at low tide on the transgressive, hypertidal (>6 m tidal range) Waterside Beach, New Brunswick, Canada permit the scrutiny of sedimentary structures and textures that develop at water depths equivalent to the upper and lower shoreface. Waterside Beach sediments are grouped into eleven sedimentologically distinct deposits that represent three depositional environments: (1) sandy foreshore and shoreface; (2) tidal‐creek braid‐plain and delta; and, (3) wave‐formed gravel and sand bars, and associated deposits. The sandy foreshore and shoreface depositional environment encompasses the backshore; moderately dipping beachface; and a shallowly seaward‐dipping terrace of sandy middle and lower intertidal, and muddy sub‐tidal sediments. Intertidal sediments reworked and deposited by tidal creeks comprise the tidal‐creek braid plain and delta. Wave‐formed sand and gravel bars and associated deposits include: sediment sourced from low‐amplitude, unstable sand bars; gravel deposited from large (up to 5·5 m high, 800 m long), landward‐migrating gravel bars; and zones of mud deposition developed on the landward side of the gravel bars. The relationship between the gravel bars and mud deposits, and between mud‐laden sea water and beach gravels provides mechanisms for the deposition of mud beds, and muddy clast‐ and matrix‐supported conglomerates in ancient conglomeratic successions. Idealized sections are presented as analogues for ancient conglomerates deposited in transgressive systems. Where tidal creeks do not influence sedimentation on the beach, the preserved sequence consists of a gravel lag overlain by increasingly finer‐grained shoreface sediments. Conversely, where tidal creeks debouch onto the beach, erosion of the underlying salt marsh results in deposition of a thicker, more complex beach succession. The thickness of this package is controlled by tidal range, sedimentation rate, and rate of transgression. The tidal‐creek influenced succession comprises repeated sequences of: a thin mud bed overlain by muddy conglomerate, sandy conglomerate, a coarse lag, and capped by trough cross‐bedded sand and gravel.     

Gravelly spit deposits in a transgressive systems tract: the Pleistocene Higashikanbe Gravel, central Japan

The Pleistocene Higashikanbe Gravel, which crops out along the Pacific coast of the Atsumi Peninsula, central Japan, consists of well‐sorted, pebble‐ to cobble‐size gravel beds with minor sand beds. The gravel includes large‐scale foreset beds (5–10 m high) and overlying subhorizontal beds (0·5–3 m thick), showing foreset and topset structure, from which the gravel has previously been interpreted as deposits of a Gilbert‐type delta. However, (1) the gravel beds lack evidence of fluvial activity, such as channels in the subhorizontal beds; (2) the foresets incline palaeolandwards; (3) the gravels fill a fluvially incised valley; and (4) the gravels overlie low‐energy deposits of a restricted environment, such as a bay or an estuary. The foresets generally dip towards the inferred palaeoshoreline, indicating landward accretion of gravel. Reconstruction of the palaeogeography of the peninsula indicates that the Higashikanbe Gravel was deposited as a spit similar to that developed at the western tip of the present Atsumi Peninsula, rather than as a delta. According to the new interpretation, the large‐scale foreset beds are deposits on the slopes of spit platforms and accreted in part to the sides of small islets that are fragments of the submerging spit during relative sea‐level rise. The subhorizontal beds include nearshore deposits on the spit platform topsets and deposits of gravel shoals or bars, which are reworked sediments of the spit beach gravels during a transgression. The lack of spit beach facies in the subhorizontal beds results from truncation by shoreface erosion. Dome structure, which is a cross‐sectional profile of a recurved gravel spit at its extreme point, and sandy tidal channel deposits deposited between the small islets were also identified in the Higashikanbe Gravel. The Higashikanbe Gravel fills a fluvially incised valley and occupies a significant part of a transgressive systems tract, suggesting that gravelly spits are likely to be well developed during transgressions. The large‐scale foreset beds and subhorizontal beds of gravelly spits in transgressive systems tracts contrast with the foreset and topset beds of deltas, characteristic of highstand, lowstand and shelf‐margin systems tracts.     

Estuarine, barrier-island to strand-plain sequence and related ravinement surface developed during the last interglacial in the Paleo-Tokyo Bay, Japan

Recognition of sequence boundaries and transgressive surfaces (i.e. ravinement surfaces, RS) is now known to be of great importance in stratigraphy. The sedimentary features of deposits immediately above a transgressive surface are well exposed in the Upper Pleistocene Kioroshi Formation of the Kanto Plain in central Japan. The formation comprises mainly coastal and shallow-marine deposits (estuarine, barrier-island and the strand-plain systems) which accumulated along a wavedominated coast in the Late Pleistocene, i.e., the last interglacial to last glacial period. The Kioroshi Formation is bounded above and below by sequence boundaries that formed in the lowstand periods correlative to the glacial periods of oxygen isotope stages 4 and 6, respectively. A significant transgressive surface that was formed by landward migration of barrier islands during the transgressive interval, the ravinement surface (RS), is found within the deposits of the upper shelf environment.

This ravinement surface is characterized by the exotic nature of the overlying sediment veneer (pebbles, shells and scattered mud clasts) which is poorly sorted. The RS shows a very flattened erosional surface in the shore-parallel sense, and the gradient of the surface in shore-normal sense is calculated as 0.0021, where the syndepositional tectonic movement is revised. The RS commonly cuts through the lower sequence boundary. However, in the places where the river or tidal channel valleys incised, the valley-filling sediment shows a deepening-upward sequence recognized as a transgressive systems tract and the RS can be clearly distinguished from the lower sequence boundary.     

Facies analysis of a Toarcian–Bajocian shallow marine/coastal succession (Bardas Blancas Formation) in northern Neuquén Basin,Mendoza province,Argentina

Strata of the Bardas Blancas Formation (lower Toarcian–lower Bajocian) are exposed in northern Neuquén Basin. Five sections have been studied in this work. Shoreface/delta front to offshore deposits predominate in four of the sections studied exhibiting a high abundance of hummocky cross-stratified, horizontally bedded and massive sandstones, as well as massive and laminated mudstones. Shell beds and trace fossils of the mixed Skolithos-Cruziana ichnofacies appear in sandstone beds, being related with storm event deposition. Gravel deposits are frequent in only one of these sections, with planar cross-stratified, normal graded and massive orthoconglomerates characterizing fan deltas interstratified with shoreface facies. A fifth outcrop exhibiting planar cross-stratified orthoconglomerates, pebbly sandstones with low-angle stratification and laminated mudstones have been interpreted as fluvial channel deposits and overbank facies. The analysis of the vertical distribution of facies and the recognition of stratigraphic surfaces in two sections in Río Potimalal area let recognized four transgressive–regressive sequences. Forced regressive events are recognized in the regressive intervals. Comparison of vertical distribution of facies also shows differences in thickness in the lower interval among the sections studied. This would be related to variations in accommodation space by previous half-graben structures. The succession shows a retrogradational arrangement of facies related with a widespread transgressive period. Lateral variation of facies let recognize the deepening of the basin through the southwest.     

Sedimentation on a wave-dominated, open-coast tidal flat, south-western Korea: summer tidal flat – winter shoreface

Sedimentation on the open-coast tidal flats of south-western Korea is controlled by seasonal variation in the intensity of onshore-directed winds and waves. As a result, an environmental oscillation takes place between tide-dominated conditions in summer and wave-dominated conditions in winter. In summer, thick muddy deposits, including sporadic storm deposits, accumulate in response to low wave energy, weak currents, and intense solar insolation that promotes consolidation of the mud at low tide. Bioturbation is minimal because of rapid sedimentation and soft substrate. During the autumn, the summer mud deposits experience erosion due to increasingly strong onshore winds and waves, until only small mud patches and mud pebbles remain. The concentration of ebb runoff between the mud patches produces small, ephemeral tidal creeks. In winter, storm waves occur frequently (ca 10 days a month) and dominate sedimentation in the intertidal zone, producing extensive wave-generated parallel lamination and short-wavelength (0·3–2 m) hummocky cross-stratification. The prevalence of strong onshore winds decreases in spring, allowing longer and more frequent intervals of calm weather, during which time muddy sediments are deposited by tidal processes. Over the long term, winter storm waves dominate sedimentation and the preserved deposits consist of amalgamated storm beds that resemble those generally associated with shorefaces. This raises the question of how many ancient ‘shorefaces’ are, in fact, open-coast tidal flats.     

Complex coastal change in response to autogenic basin infilling: An example from a sub‐tropical Holocene strandplain

Thick bay‐fill sequences that often culminate in strandplain development serve as important sedimentary archives of land–ocean interaction, although distinguishing between internal and external forcings is an ongoing challenge. This study employs sediment cores, ground‐penetrating radar surveys, radiocarbon dates, palaeogeographic reconstructions and hydrodynamic modelling to explore the role of autogenic processes – notably a reduction in wave energy in response to coastal embayment infilling – in coastal evolution and shoreline morphodynamics. Following a regional 2 to 4 m highstand at ca 5·8 ka, the 75 km² Tijucas Strandplain in southern Brazil built from fluvial sediments deposited into a semi‐enclosed bay. Holocene regressive deposits are underlain by fluvial sands and a Pleistocene transgressive–regressive sequence, and backed by a highstand barrier‐island. The strandplain is immediately underlain by 5 to 16 m of seaward‐thickening, fluvially derived, Holocene‐age, basin‐fill mud. Several trends are observed from the landward (oldest) to the seaward (youngest) sections of the strandplain: (i) the upper shoreface and foreshore become finer and thinner and shift from sand‐dominated to mud‐dominated; (ii) beachface slopes decrease from >11° to ca 7°; and (iii) progradation rates increase from 0·4 to 1·8 m yr^?1. Hydrodynamic modelling demonstrates a correlation between progressive shoaling of Tijucas Bay driven by sea‐level fall and sediment infilling and a decrease in onshore wave‐energy transport from 18 to 4 kW m^?1. The combination of allogenic (sediment supply, falling relative sea‐level and geology) and autogenic (decrease in wave energy due to bay shoaling) processes drove the development of a regressive system with characteristics that are rare, if not unique, in the Holocene and rock records. These findings demonstrate the complexities in architecture styles of highstand and regressive systems tracts. Furthermore, this article highlights the diverse internal and external processes and feedbacks responsible for the development of these intricate marginal marine sedimentary systems.