Evidence for different scaling of earthquake source parameters for large earthquakes depending on faulting mechanism

Scaling relationships between seismic moment, rupture length, and rupture width have been examined. For this purpose, the data from several previous studies have been merged into a database containing more than 550 events. For large earthquakes, a dependence of scaling on faulting mechanism has been found. Whereas small and large dip-slip earthquakes scale in the same way, the self-similarity of earthquakes breaks down for large strike-slip events. Furthermore, no significant differences in scaling could be found between normal and reverse earthquakes and between earthquakes from different regions. Since the thickness of the seismogenic layer limits fault widths, most strike-slip earthquakes are limited to rupture widths of between 15 and 30 km while the rupture length is not limited. The aspect ratio of dip-slip earthquakes is similar for all earthquake sizes. Hence, the limitation in rupture width seems to control the maximum possible rupture length for these events. The different behaviour of strike-slip and dip-slip earthquakes can be explained by rupture dynamics and geological fault growth. If faults are segmented, with the thickness of the seismogenic layer controlling the length of each segment, strike-slip earthquakes might rupture connected segments more easily than dip-slip events, and thus could produce longer ruptures than dip-slip events of the same width     

Applying the relative hypocentre location approach: where was the 1980 November 23 Irpinia earthquake?

The purpose of this work is to evaluate under what conditions it is feasible and with what accuracy it is possible to locate the nucleation point of a large earthquake, given the availability of aftershocks located with high precision by the deployment of a local network. We experiment with several approaches and apply them lo the location of the epicentre of the 1980 November 23 Irpinia earthquake ( M ^w= 6.9).
First we use local P ^g phases selected to optimize the azimuthal coverage, obtaining a well-constrained location with a small statistical error, which typically underestimates the true hypocentre uncertainty.
We then exploit the relative location technique, obtaining stable, almost coincident solutions under three conditions: (1) using multiple independent master events to derive an average epicentre; (2) fitting simultaneously the larger data set for all available master events, using a forward approach; (3) conducting an a priori evaluation of the statistics of station and master events to separate model uncertainties and improve the statistical accuracy of the relative locations. Moreover, only by introducing station statistics can we achieve the desired accuracy of ≅ 1 km in constraining the rupture nucleation point of this large earthquake, and we show that the application of the relative location technique to uncleaned, unweighted data for a single master event provides only a crude epicentre with a confidence ellipse deceivingly smaller than the true hypocentre uncertainty.
The revised epicentre for the 1980 November 23 Irpinia earthquake (48.803 °N-15.302°E) validates the class of multidisciplinary reconstructions of the source process such as the model of Valensise et al. (1989), based on the hypocentre of Westaway & Jackson (1987), and is shifted by almost 13 km to the NW of the epicentre recently proposed by Westaway (1992).     

Lower-crustal rifting in the Rukwa Graben, East Africa

An M_w 5.9 earthquake occurred in the Lake Rukwa rift, Tanzania, on 1994 August 18, and was well recorded by 20 broad-band seismic stations at distances of 160 to 800 km and 21 broad-band stations at teleseismic distances. The regional and teleseismic waveforms have been used to investigate the source characteristics of the main shock, and also to locate aftershocks that occurred within three weeks of the main shock. Teleseismic body-wave modelling yields the following source parameters for the main shock: source depth of 25 ± 2 km, a normal fault orientation, with a horizontal tension axis striking NE-SW and an almost vertical pressure axis (Nodal Plane I: strike 126°–142°, dip 63°–66°, and rake 280°–290°; Nodal Plane II: strike 273°–289°, dip 28°–31°, and rake 235°–245°), a scalar moment of 4.1 times 10¹⁷ N m, and a 2 s impulsive source time function. Four of the largest aftershocks also nucleated at depths of 25 km, as deduced from regional sPmp–Pmp times. The nodal planes are broadly consistent with the orientation of both the Lupa and Ufipa faults, which bound the Rukwa rift to the northeast and southwest, respectively. The rupture radius of the main shock, assuming a circular fault, is estimated to be 4 km with a corresponding stress drop of 6.5 MPa. Published estimates of crustal thickness beneath the Rukwa rift indicate that the foci of the main shock and aftershocks lie at least 10 km above the Moho. The presence of lower-crustal seismicity beneath the Rukwa rift suggests that the pre-rift thermal structure of the rifted crust has not been strongly modified by the rifting, at least to depths of 25 km.     

Aseismic fault movement before the 1995 Kobe earthquake detected by a GPS survey: implication for preseismic stress localization?

By inversion analysis of the baseline changes and horizontal displacements observed with GPS (Global Positioning System) during 1990–1994, a high-angle reverse fault was detected in the Shikoku-Kinki region, southwest Japan. The active blind fault is characterized by reverse dip-slip (0.7±0.2  m yr⁻¹ within a layer 17–26  km deep) with a length of 208±5  km, a (down-dip) width of 9±2  km, a dip-angle of 51°±2° and a strike direction of 40°±2° (NE). Evidence from the geological investigation of subfaults close to the southwestern portion of the fault, two historical earthquakes ( M _L=7.0, 1789 and 6.4, 1955) near the centre of the fault, and an additional inversion analysis of the baseline changes recorded by the nationwide permanent GPS array from 18 January to 31 December 1995 partially demonstrates the existence of the fault, and suggests that it might be a reactivation of a pre-existing fault in this region. The fact that hardly any earthquakes ( M _L>2.0) occurred at depth on the inferred fault plane suggests that the fault activity was largely aseismic. Based on the parameters of the blind fault estimated in this study, we evaluated stress changes in this region. It is found that shear stress concentrated and increased by up to 2.1 bar yr⁻¹ at a depth of about 20  km around the epicentral area of the 1995 January 17  Kobe earthquake ( M _L=7.2, Japan), and that the earthquake hypocentre received a Coulomb failure stress of about 5.6 bar yr⁻¹ during 1990–1994. The results suggest that the 1995  Kobe earthquake could have been induced or triggered by aseismic fault movement.     

A conjugate strike-slip fault system within the extensional tectonics of Western Turkey

Three main shocks M-1, M-2 and M-3 (17 October 2005 at 05:45 UTC, M _w 5.4; 17 October at 09:46 UTC, M _w 5.8 and 20 October at 21:40 UTC, M _w 5.9) and their associated aftershocks within the Gulf of S i ğac i k, 50 km southwest of Izmir, Turkey were studied in detail. A temporary seismic network deployed during the activity allowed the hypocentre of M-3 and subsequent aftershocks to be determined with high accuracy. A relative relocation technique was used to improve the epicentres of M-1 and M-2. All three main shocks have strike-slip mechanisms which agree with the linear trends of the aftershock locations. Two distinct zones were illuminated by the aftershock locations. The zones contain clear echelon patterns with slightly different orientations from the trend of the aftershock distribution. M-2 and M-3 ruptured along of the eastern rupture zone which aligns N45°E. However the strike direction of M-1 is not clearly identified. The alignment of the two rupture zones intersect at their southern terminus at an angle of 90°. The fault zones form conjugate pair system and static triggering is considered as a probable mechanism for the sequential west to east occurrence of M-1, M-2 and M-3. This earthquake sequence provides seismological evidence for conjugate strike-slip faulting co-existing within a region dominated by north–south extension and well-developed east–west trending normal faults.     

Source process and tectonic implications of the great 1975 North Atlantic earthquake

Summary. The Atlantic segment of the Africa–Europe plate boundary has usually been interpreted as a transform boundary on the basis of the bathymetric expression of the Gloria fault and dextral strike-slip first-motion mechanisms aligned along the Azores–Gibraltar line of seismicity. The 1975 May 26 earthquake ( M _s=7.9) was assumed to fit into this framework because it occurred in the general area of this line and has a similar first-motion focal mechanism (strike=288°, dip=72°, slip angle=184°). However, several anomalies cast doubt on this picture: the event is abnormally large for an oceanic transform event; a sizeable tsunami was excited; the aftershock area is unusually small for such a large event; and most significantly, the epicentre is 200 km south of the presumed plate boundary. The Rayleigh wave radiation pattern indicates a change in focal mechanism to one with a significant dip-slip component. The short duration of the source time history (20 s, as deconvolved from long-period P -waves), the lack of directivity in the Rayleigh waves, and the small one-day aftershock area suggest a fault length less than 80 km. One nodal plane of the earthquake is approximately aligned with the trace of an ancient fracture zone.
We have compared the Pasadena 1-90 record of the 1975 earthquake to that of the 1941 North Atlantic strike-slip earthquake (200 km to the NNW) and confirmed the large size of the 1941 event ( M =8.2). The non-colinear relationship of the 1975 and 1941 events suggests that there is no well-defined plate boundary between the Azores and Gibraltar. This interpretation is supported by the intraplate nature of both the 1975 event and the large 1969 thrust event 650 km to the east. This study also implies that the largest oceanic strike-slip earthquakes occur in old lithosphere in a transitional tectonic regime.     

Source mechanism of the deep Colombian earthquake of 1970 July 31 from the free oscillation data

Summary. The method proposed by Mendiguren to determine the source parameters from free oscillation data is applied to the 1970 July 31 deep Colombian earthquake. The results indicate a source propagating horizontally for about 150 km along the lithosphere and cutting across its width. The slab behaves as a guide for source propagation. The horizontal propagation velocity is determined as 3.8 km/s. The intensity of the source grew proportionately to the second power of the propagation distance. This rate of source intensity growth may be interpreted either by a fan-shaped fault model or by a cone-shaped volume source. The average slip and stress drop are estimated as 360 cm and 300 bar for the fault model. For the volume source model the transformational shear strain and stress are estimated as 11 × 10⁻⁵ and 160 bar. There is no evidence of a double couple radiation preceding the P origin time. It is shown that the isotropic and deviatoric components of the moment tensor cannot be uniquely resolved when only observations of a single mode are available. It is observed that, from a statistical basis, the available ₀ S_n data for Colombian shock can be equally well explained by a pure deviatoric source model or by a source model including an isotropic component. Numerical experiments indicate that the inclusion of higher mode data does not change this situation. But, on the other hand, numerical experiments show that the available data and the scheme used for the inversion would not result in a solution including an artificial implosive component if the actual source were pure deviatoric. If the departure from a pure deviatoric source is produced by noise, it has to be non-random, as it could be produced by lateral heterogeneities not included in the inversion scheme.     

Crustal structure of the Faeroe–Shetiand Channel

Summary. The deep structure of the Faeroe–Shetland Channel has been investigated as part of the North Atlantic Seismic Project. Shot lines were fired along and across the axis of the Channel, with recording stations both at sea and on adjacent land areas. At 61°N, 1.7 km of Tertiary sediments overlies a 3.9–4.5 km s^-1 basement interpreted as the top of early Tertiary volcanics. A main 6.0–6.6 km s^-1 crustal refractor interpreted as old oceanic crust occurs at about 9 km depth. The Moho (8.0 ° 0.2 km s^-1) is at about 15–17 km depth. There is evidence that P _n may be anisotropic beneath the Faeroe–Shetland Channel. Arrivals recorded at land stations show characteristics best explained by scattering at an intervening boundary which may be the continent–ocean crustal contact or the edge of the volcanics.
The Moho delay times at the shot points, determined by time-term analysis, show considerable variation along the axis of the Channel. They correlate with the basement topography, and the greatest delays occur over the buried extension of the Faeroe Ridge at about 60° 15'N, where they are nearly 1 s more than the delays at 61°N after correction for the sediments. The large delays are attributed to thickening of the early Tertiary volcanic layer with isostatic downsagging of the underlying crust and uppermost mantle in response to the load, rather than to thickening of the main crustal ayer.
The new evidence is consistent with deeply buried oceanic crust beneath the Faeroe–Shetland Channel, forming a northern extension of Rockall Trough. The seabed morphology has been grossly modified by the thick and laterally variable pile of early Tertiary volcanic rocks which swamped the region, accounting for the anomalous shallow bathymetry, the transverse ridges and the present narrowness of the Channel.     

New seismogenic source and deep structures revealed by the 1999 Chia-yi earthquake sequence in southwestern Taiwan

In a tectonically active setting large earthquakes are always threats; however, they may also be useful in elucidating the subsurface geology. Instrumentally recorded seismicity is, therefore, widely utilized to extend our knowledge into the deeper crust, especially where basement is involved. It is because the earthquakes are triggered by underground stress changes that usually corresponding to the framework of geological structures. Hidden faults, therefore, can be recognized and their extension as well as orientation can be estimated. Both above are of relevance for assessment on seismic hazard of a region, since the active faults are supposed to be re-activated and cause large earthquakes. In this study, we analysed the 1999 October 22 earthquake sequence that occurred in southwestern Taiwan. Two major seismicity clusters were identified with spatial distribution between depths of 10 and 16 km. One cluster is nearly vertical and striking 032°, corresponding to the strike-slip Meishan fault (MSF) that generated the 1906 surface rupture. Another cluster strikes 190° and dips 64° to the west, which is interpreted as west-vergent reverse fault, in contrast to previous expectation of east vergence. Our analysis of the focal solutions of all the larger earthquakes in the 1999 sequence with the 3-D distribution of all the earthquakes over the period 1990–2004 allows us reinterpret the structural framework and suggest previously unreognized seismogenic sources in this area. We accordingly suggest: (1) multiple detachment faults are present in southwestern Taiwan coastal plain and (2) additional seismogenic sources consist of tear faults and backthrust faults in addition to sources associated with west-vergent fold-and-thrust belt.     

Upper-crustal structure of the Benevento area (southern Italy): fault heterogeneities and potential for large earthquakes

The Benevento region is part of the southern Apennines seismogenic belt, which experienced large destructive seismic events both in historical and in recent times. The study area lies at the northern end of the Irpinia fault, which ruptured in 1980 with a M_s = 6.9 normal faulting event, which caused about 3000 casualties. The aims of this paper are to image lateral heterogeneities in the upper crust of the Benevento region, and to try to identify the fault segments that are expected to generate such large earthquakes. This work is motivated by the recognition that lithological heterogeneities along major fault zones, inferred from velocity anomalies, reflect the presence of fault patches that behave differently during large rupture episodes. In this paper, we define the crustal structure of the Benevento region by using the background seismicity recorded during 1991 and 1992 by a local seismic array. These data offer a unique opportunity to investigate the presence of structural discontinuities of a major seismogenic zone before the occurrence of the next large earthquake. The main result that we obtained is the delineation of two NW-trending high-velocity zones (HVZs) in the upper crust beneath the Matese limestone massif. These high velocities are interpreted as high-strength regions that extend for 30-40 km down to at least 12 km depth. The correspondence of these HVZs with the maximum intensity regions of historical earthquakes (1688 AD, 1805 AD) suggests that these anomalies delineate the extent of two fault segments of the southern Apenninic belt capable of generating M = 6.5⁻⁷ earthquakes. The lateral offset observed between the two segments from tomographic results and isoseismal areas is possibly related to transverse right-lateral faults.     

Travel-time anomalies in the mantle under the North Atlantic

Summary. Lateral heterogeneity exists in the Earth's mantle, and may result in seismic velocity anomalies up to several per cent. If convection cells and plumes extend down to the core, then these features may be associated with local inhomogeneities observed in the lower mantle.
Published data for direct and core-reflected P -wave residuals are used to delineate velocity anomalies in the middle—lower mantle under the North Atlantic. Differential ( PcP — P ) residuals indicate travel-time anomalies near the core—mantle transition, and may be due to core topography or lateral variations in velocity. It is assumed that the anomalies occur near the midpoints of the ray paths. The main source of error in the data set may arise from phases which have been identified incorrectly. Hence trend-surfaces are fitted to the residual data to show only the large-scale trends in anomaly values, with wavelengths of the order of 1000 km.
The Azores and Colorado hot spots occur in a region covered by the data. A possible interpretation of the trend maps is that an anomalous zone extends from a relatively fast region at the core boundary at 35° N, 50° W up to these hot spots, at about 30 degrees from the vertical. This may agree with the suggestion of Anderson that plumes are chemical rather than thermal in origin. If inclⁱned plumes do exist, the deviation from the ideal vertical plume or convection cell boundary may imply that lateral shear or other distortion effects exist in the mantle.     

A method for the near-source anisotropy by the pair-event inversion of Rayleigh-wave radiation patterns

Summary. A novel method is proposed for retrieving the 3-D orientation of axes of symmetry of near-source anisotropy by a non-linear inversion of observed radiation patterns of seismic displacement spectra of Rayleigh waves.
If faulting is generated within an anisotropic source region, body force equivalents for the faulting are in general not a double couple but the sum of three orthogonal dipole forces (Kosevich; Kawasaki & Tanimoto). As a result of the third dipole force, radiation patterns of Rayleigh waves are deformed, the deformation amounting to several per cent of those for an isotropic source medium. The non-linear inversion is carried out to find the optimum fault plane solutions giving the minimum square residual between observed and theoretical radiation patterns in some period range. In order to remove effects of heterogeneity along propagation paths, a pair-event scheme is involved in the inversion, which denotes taking spectral amplitude ratios and differential phases of the seismic displacement spectra of the pair-events having close hypocentres and different fault plane solutions. The uniqueness of the fault plane solutions of the non-linear inversion is afforded a proof by the Monte-Carlo experiment.
The non-linear inversion is repeated for some possible types of symmetry of the near-source orthotropic anisotropy due to the preferred orientation of olivine crystals as mantle materials. Square residuals thus obtained are compared with each other to see which orientation gives the minimum.
The method is applied to pair-events which occurred in the anomalous mantle beneath the Mid-Atlantic Ridge. This leads to a discovery that one type of symmetry of the preferred orientations with a -, b - and c-axes aligned vertical, parallel to and perpendicular to the trend (N11E) of the ridge axis, respectively, is most likely existing in the anomalous mantle.     

Viscoelastic relaxation and long-lasting after-slip following the 1997 Umbria-Marche (Central Italy) earthquakes

We combine Global Positioning System (GPS) measurements with forward modelling of viscoelastic relaxation and after-slip to study the post-seismic deformation of the 1997 Umbria-Marche (Central Apennines) moderate shallow earthquake sequence. Campaign GPS measurements spanning the time period 1999–2003 are depicting a clear post-seismic deformation signal. Our results favour a normal faulting rupture model where most of the slip is located in the lower part of the seismogenic upper crust, consistent with the rupture models obtained from the inversion of strong motion data. The preferred rheological model, obtained from viscoelastic relaxation modelling, consists of an elastic upper crust, underlain by a transition zone with a viscosity of 10¹⁸ Pa s, while the rheology of deeper layers is not relevant for the observed time-span. Shallow fault creep and after-slip at the base of the seismogenic upper crust are the first order processes behind the observed post-seismic deformation. The deep after-slip, below the fault zone at about 8 km depth, acting as a basal shear through localized time-dependent deformation, identifies a rheological discontinuity decoupling the seismogenic upper crust from the low-viscosity transition zone.     

Dynamic rupture and stress change in a normal faulting earthquake in the subducting Cocos plate

A large nearly vertical, normal faulting earthquake ( M _w = 7.1) took place in 1997 in the Cocos plate, just beneath the ruptured fault zone of the great 1985 Michoacan thrust event ( M _w = 8.1). Dynamic rupture and resultant stress change during the 1997 earthquake have been investigated on the basis of near-source strong-motion records together with a 3-D dynamic model.
Dynamically consistent waveform inversion reveals a highly heterogeneous distribution of stress drop, including patch-like asperities and negative stress-drop zones. Zones of high stress drop are mainly confined to the deeper, southeastern section of the vertical fault, where the maximum dynamic stress drop reaches 280 bars (28 MPa). The dynamically generated source time function varies with location on the fault, and yields a short slip duration, which is caused by a short scalelength of stress-drop heterogeneities. The synthetic seismograms calculated from the dynamic model are generally consistent with the strong-motion velocity records in the frequency range lower than 0.5 Hz.
The pattern of stress-drop distribution appears, in some sense, to be consistent with that of coseismic changes in shear stress resulting from the 1985 thrust event. This consistency suggests that the stress transfer from the 1985 event to the subducting plate could be one of the possible mechanisms that increased the chance of the occurrence of the 1997 earthquake.     

Upper-mantle structure of the Baltic Shield below the Swedish National Seismological Network (SNSN) resolved by teleseismic tomography

Upper-mantle structure under the Baltic Shield is studied using non-linear high resolution teleseismic P -phase tomography. Observed relative arrival-time residuals from 52 teleseismic earthquakes recorded by the Swedish National Seismological Network (SNSN) are inverted to delineate the structure of the upper mantle. The network consists of 47 (currently working) three-component broad-band stations located in an area about 450 km wide and 1450 km long. In order to reduce complications due to possible significant three-dimensionality of Earth structure, events chosen for this study lay close to in-line with the long-axis of the array  (±30°)  . Results indicate P -wave velocity perturbations of ±3 per cent down to at least 470 km below the network. The size of the array allows inversion for structures even at greater depths, and lateral variations of velocity at depths of up to 680 km appear to be resolved. Below the central part of the array (60°–64° N), where ray coverage is best, the data reveals a large region of relatively low velocity at depths of over about 300 km. At depths less than about 250–300 km, the models include a number of features, including an apparent slab-like structure dipping gently towards the north.     

High-resolution structures of the Landers fault zone inferred from aftershock waveform data

High-frequency body waves recorded by a temporary seismic array across the surface rupture trace of the 1992 Landers, California, earthquake were used to determine fault-zone structures down to the seismogenic depth. We first developed a technique to use generalized ray theory to compute synthetic seismograms for arbitrarily oriented tabular low-velocity fault-zone models. We then generated synthetic waveform record sections of a linear array across a vertical fault zone. They show that both arrival times and waveforms of P and S waves vary systematically across the fault due to transmissions and reflections from boundaries of the low-velocity fault zone. The waveform characteristics and arrival-time patterns in the record sections allow us to locate the boundaries of the fault zone and to determine its P - and S -wave velocities independently as well as its depth extent. Therefore, the trade-off between the fault-zone width and velocities can be avoided. Applying the method to the Landers waveform data reveals a low-velocity zone with a width of 270–360 m and a 35–60 per cent reduction in P and S velocities relative to the host rock. The analysis suggests that the low-velocity zone extends to a depth of ∼7 km. The western boundary of the low-velocity zone coincides with the observed main surface rupture trace.     

Earthquake processes of the Himalayan collision zone in eastern Nepal and the southern Tibetan Plateau

Focal mechanisms determined from moment tensor inversion and first motion polarities of the Himalayan Nepal Tibet Seismic Experiment (HIMNT) coupled with previously published solutions show the Himalayan continental collision zone near eastern Nepal is deforming by a variety of styles of deformation. These styles include strike-slip, thrust and normal faulting in the upper and lower crust, but mostly strike-slip faulting near or below the crust–mantle boundary (Moho). One normal faulting earthquake from this experiment accommodates east–west extension beneath the Main Himalayan Thrust of the Lesser Himalaya while three upper crustal normal events on the southern Tibetan Plateau are consistent with east–west extension of the Tibetan crust. Strike-slip earthquakes near the Himalayan Moho at depths >60 km also absorb this continental collision. Shallow plunging P -axes and shallow plunging EW trending T -axes, proxies for the predominant strain orientations, show active shearing at focal depths ∼60–90 km beneath the High Himalaya and southern Tibetan Plateau. Beneath the southern Tibetan Plateau the plunge of the P -axes shift from vertical in the upper crust to mostly horizontal near the crust–mantle boundary, indicating that body forces may play larger role at shallower depths than at deeper depths where plate boundary forces may dominate.     

2001 August earthquake swarm at Shadwan Island, Gulf of Suez, Egypt

The earthquake swarm that struck Shadwan Island at the entrance of the Gulf of Suez in 2001 August included 408 events. Almost all of these events (94 per cent) were microearthquakes and only 6 per cent had small measurable magnitudes  (5.0 > M _L≥ 3.0)  . Most of the earthquakes were weak and followed each other so closely in time that they could not be identified at more distant stations. The fault plane solutions of the strongest events of the swarm show almost identical focal mechanisms, predominately normal faulting with a significant sinistral strike-slip component for nodal planes trending NW–SE. A comparison with the mechanisms of the 1969 and 1972 events which took place 20 km north of the swarm epicentral region shows similarities in faulting type and orientation of nodal planes. The azimuths of T -axes determined from focal mechanisms in this study are oriented in the NNE–SSW direction. This direction is consistent with the present-day stress field derived from borehole breakouts in the southern Gulf of Suez and the last phase of stress field changes in the Late Pleistocene, as well as with recent GPS results.
The source parameters of the largest  ( M _L≥ 3.0)  events of the 2001 August Shadwan swarm have been estimated from the P -wave spectra of the Egyptian National Seismograph Network (ENSN). Averaging of the values obtained at different stations shows relatively similar source parameters, including a fault length of  0.65 ≤ L ≤ 2 km  , a seismic moment of  7.1 × 10¹²≤ Mo ≤ 3.0 × 10¹⁴ N m  and a stress drop of  0.4 ≤Δσ≤ 10  bar.     

Post-seismic reloading and temporal clustering on a single fault

Geological studies show evidence for temporal clustering of large earthquakes on individual fault systems. Since post-seismic deformation due to the inelastic rheology of the lithosphere may result in a variable loading rate on a fault throughout the interseismic period, it is reasonable to expect that the rheology of the non-seismogenic lower crust and mantle lithosphere may play a role in controlling earthquake recurrence times. We study this phenomenon using a 2-D, finite element method continuum model of the lithosphere containing a single strike-slip fault. This model builds on a previous study using a 1-D spring-dashpot-slider analogue of a single fault system to study the role of Maxwell viscoelastic relaxation in producing non-periodic earthquakes. In our 2-D model, the seismogenic portion of the fault slips when a predetermined yield stress is exceeded; stress accumulated on the seismogenic fault is shed to the viscoelastic layers below and recycled back to the seismogenic fault through viscoelastic relaxation. We find that random variation of the fault yield stress from one earthquake to the next can cause the earthquake sequence to be clustered; the amount of clustering depends on a non-dimensional number, W , called the Wallace number defined as the standard deviation of the randomly varied fault yield stress divided by the effective viscosity of the system times the tectonic loading rate. A new clustering metric based on the bimodal distribution of interseismic intervals allows us to investigate clustering behaviour of systems over a wide range of model parameters and those with multiple viscoelastic layers. For models with   W ≥ 1  clustering increases with increasing W , while those with   W ≤ 1  are unclustered, or quasi-periodic.     

Focal mechanisms of recent earthquakes in the Southern Korean Peninsula

We evaluate the stress field in and around the southern Korean Peninsula with focal mechanism solutions, using the data collected from 71 earthquakes ( M_L = 1.9–5.2) between 1999 and 2004. For this, the hypocentres were relocated and well-constrained fault plane solutions were obtained from the data set of 1270 clear P -wave polarities and 46 SH / P amplitude ratios. The focal mechanism solutions indicate that the prevailing faulting types in South Korea are strike-slip-dominant-oblique-slip faultings with minor reverse-slip component. The maximum principal stresses (σ₁) estimated from fault-slip inversion analysis of the focal mechanism solutions show a similar orientation with E–W trend (269°–275°) and low-angle plunge (10°–25°) for all tectonic provinces in South Korea, consistent with the E–W trending maximum horizontal stress (σ_Hmax) of the Amurian microplate reported from in situ stress measurements and earthquake focal mechanisms. The directions of the intermediate (σ₂) and minimum (σ₃) principal stresses of the Gyeongsang Basin are, however, about 90 deg off from those of the other tectonic provinces on a common σ₂–σ₃ plane, suggesting a permutation of σ₂ and σ₃. Our results incorporated with those from the kinematic studies of the Quaternary faults imply that NNW- to NE-striking faults (dextral strike-slip or oblique-slip with a reverse-slip component) are highly likely to generate earthquakes in South Korea.