共查询到18条相似文献,搜索用时 171 毫秒
1.
研究了在建阶段导管架圆管发生风致涡激振动对整体疲劳性能的影响。建立了圆管动力学模型,分析了圆管的动力学特性;固定系数取值0.7模拟实际工程中圆管两端的焊接约束形式,计算了圆管的振动响应;基于线性累积损伤准则和S-N曲线计算了圆管发生风致涡激振动的疲劳损伤度,并根据规范计算出圆管在位阶段的疲劳损伤度,对比总结风致涡激振动对总体疲劳性能的影响以及振动抑制措施对疲劳性能的改善。研究表明,在建阶段导管架圆管发生风致涡激振动会明显地影响圆管的疲劳特性,降低疲劳寿命,因此可以通过绑定绳索、安装防振锤等手段减少结构的疲劳损伤。 相似文献
2.
研究了大型导管架平台卧式建造时出现单边约束圆管的风致涡激振动问题。将建造过程中单边约束的导管架圆管简化成悬臂梁模型,采用van der Pol尾流振子模型模拟圆管受到的流体力,建立了圆管风致涡激振动动力学方程。使用伽辽金方法对建立的运动方程进行求解,数值分析了圆管在特定约化风速下的涡激振动特性。在圆管上附加非线性能量阱(NES)作为被动减振装置对圆管进行减振,并采用粒子群优化算法对NES的非线性刚度和阻尼参数进行了优化。结果表明,在约化速度为4.8时,得到的NES优化的非线性刚度和阻尼参数组合可以有效减小悬臂梁自由端风致涡激振动位移。本研究说明采用NES和粒子群优化算法可以有效减小圆管的风致涡激振动,为导管架安全建造提供一定的参考。 相似文献
3.
由于深水浮式平台的运动幅度较固定式平台增大,其运动与下部立管的动力耦合变得更加明显。研究了上部平台运动对水下立管涡激振动的影响,基于有限元数值模拟,建立了与结构运动耦合的立管尾迹流场的涡激升力、流体阻力模型,进行了"平台运动-立管涡激振动"整体系统的动响应数值模拟,分析了平台横荡运动的幅值、频率等因素对水下立管涡激振动的影响。结果表明,上部平台的振动会在沿着立管展向传播的过程中被放大(称为响应放大);与不考虑平台运动相比,立管的动响应位移增大了多倍,而且振幅放大倍数随着模态阶数的降低而增大;平台横荡振幅越大,立管振动幅值也越大,但是振幅放大倍数的变化不明显。 相似文献
4.
《中国海洋大学学报(自然科学版)》2015,(6)
考虑内流作用利用功能原理建立顶张力立管涡激振动响应数值模型,采用尾流振子模型模拟涡激振动升力,利用Hermit插值函数将其离散得到立管振动响应的矩阵方程形式,运用Newmark-β法在时域内迭代求解其动力响应。在山东省海洋工程重点实验室进行了阶段流作用下的大长细比海洋立管涡激振动试验,对比数值模拟和试验结果表明该模型对于考虑内流作用的大长细比海洋立管涡激振动响应预报是有效的,为深水立管涡激振动研究提供一定的借鉴。 相似文献
5.
螺旋列板——深水立管涡激振动抑制装置 总被引:4,自引:0,他引:4
立管是海洋油气开采中必不可少的组成部分,它承担着流体输送和钻探的重要功能。深水立管在来流作用下容易产生涡激振动,涡激振动是造成立管疲劳破坏的主要原因之一,它会加速立管的疲劳破坏,因此需要采取适当的措施抑制深水立管涡激振动。海洋工程中涡激振动的削弱方法多是在立管外侧添加抑制装置,螺旋列板作为一种广泛应用的深水立管涡激振动抑制装置,在墨西哥湾、北海、西非等深水项目中有多年的应用。文中介绍了螺旋列板的设计、加工制作及安装方法,着重阐述了列板形状尺寸、海洋生物、包覆比例等对其抑制效率的影响,最后对螺旋列板的未来发展方向进行了展望。 相似文献
6.
圆柱涡激振动问题一直以来备受关注,分离盘作为涡激振动抑制装置得到广泛研究。分离盘长度L与圆柱直径D之比L/D是影响抑制效果的主要因素。运用有限体积法结合RANS方程与一定的湍流模式离散和求解流场,通过编写自定义程序,使用动网格模拟结构物的运动带来的流域边界的变化,针对弹性支撑的圆柱及附加长度为0.5 D的分离盘模型,在约化速度Ur为2.5~13的情况下,对涡激振动及其抑制进行研究。结果表明:分离盘可以抑制甚至消除圆柱涡激振动,99%以上的振幅被抑制;锁定区始点被推后,锁定区变窄;附加分离盘的圆柱阻力和升力被抑制;其斯特鲁哈数(St)稍高于单圆柱St但差别不大。 相似文献
7.
《中国海洋大学学报(自然科学版)》2015,(10)
涡激振动潮流能转换装置是适用于低流速、浅水地区的海洋潮流能资源开发的一种新型装置。本文对涡激振动装置的工作机理进行研究,利用涡激振动流体力分解模型,建立了涡激振动方程和预测模型并对预测模型进行了验证。建立涡激振动的数学耦合模型,结合理论分析和预测模型设计了模型实验样机,进行水槽实验,测试流速、弹性系数等参数对涡激振动响应的影响,实验数据验证了数学耦合模型的合理性。 相似文献
8.
基于自主研发的紧致插值曲线CIP (Constrained Interpolation Profile)方法数学模型,对均匀来流条件时不同运动自由度组合下的串列双圆柱涡激振动问题开展二维数值模拟。模型针对雷诺数Re=100,质量比m*=2的串列双圆柱涡激振动问题,选取上、下游圆柱不同运动自由度组合工况进行模拟。重点分析圆柱的升阻力系数、运动位移随折合速度Ur变化的响应。研究表明:当上游圆柱双自由度运动时,随着下游圆柱运动自由度的增加,下游圆柱对上游圆柱涡激振动响应的影响减弱;当下游圆柱双自由度运动时,随着上游圆柱运动自由度的增加,上游圆柱对下游圆柱涡激振动响应的影响变强。研究结果表明圆柱运动自由度组合形式对串列双圆柱涡激振动的影响不可忽略。 相似文献
9.
深水浮式平台垂荡运动与水下柔性立管涡激振动的动力耦合 总被引:1,自引:0,他引:1
基于有限元数值模拟,进行了"平台垂荡-顶张力立管涡激振动"整体系统的动响应数值模拟。动响应模型考虑了立管尾迹流场的水动力与结构动力的耦合和垂荡引起的立管结构刚度的时变特性;分析了平台垂荡运动的频率、模态阶数等因素对水下顶张力立管涡激振动的影响。数值结果表明:与不考虑平台运动相比,立管的动响应位移会增大;立管响应幅值随着模态阶数的降低而增大;在响应过程中,尤其对于低阶模态,会出现响应的模态转换现象。鉴于在平台垂荡和涡激振动的共同作用下,立管的动响应会大于涡激振动、参数激励分别单独作用的响应,建议在立管实际工程设计中应该考虑平台运动和涡激振动耦合激励作用下的结构动响应。 相似文献
10.
11.
12.
Since permanent wave-induced vibrations of offshore jacket platforms reduce the service life of the jacket structure and deck equipment and increase the fatigue failure of the welded connections, this research has used SMA (shape memory alloy) dampers to control the jacket platform oscillations. Superelasticity, high durability, and energy dissipation capability make SMA elements good nominees for the design of vibration control devices. In this research, to model the force-displacement hysteretic behavior of SMA elements their idealized multi-linear constitutive model has been implemented and the time history responses of vibration equations have been evaluated by direct integration method. To analyze the SMA damper effects on the vibration suppression of the jacket platforms, a 90 (m) high jacket located 80 (m) deep in water has been selected as a case study. Numerical results have shown that optimized SMA dampers with constant-geometry SMA bars will improve the dynamic behavior of the jacket platform under the action of an extreme regular wave. However, under the action of two irregular waves, SMA dampers with varying-geometry SMA bars will cause significant reduction in the dynamic responses of the jacket platform. The power spectral density function of the deck displacements have shown that the previously mentioned SMA dampers avoid resonance by shifting the natural frequencies of the jacket structure away from the excitation frequencies. 相似文献
13.
Numerical simulation of a short flexible pipe subject to forced motion and vortex-induced vibration 总被引:2,自引:0,他引:2
A series of numerical simulations about a small scale(aspect ratio:63.2) flexible pipe undergoing forced harmonious oscillation and vortex-induced vibration(VIV) have been taken into account.The wake hydrodynamics and pipe deformation were accomplished by ANSYS MFX solution strategy designed for fluid-structure interaction(FSI) problem with well-performed LES model.The configuration of structured mesh,multi-domain design,different mesh stiffness admeasured by User Fortran ensured that the numerical task was competent to deal with large deformation related to this case.The introduction of instantaneous amplitude definition and modeless component decomposition method(Chen and Kim,2008) was helpful to reveal much more information from modal analysis.Most results from numerical simulation are generally consistent with those from model test(Choi and Hong,2000) via the comparison between them.As supplementary to model test,visualization of the vortex wake was also provided.It has been proved that the forced oscillation doesn't only excite a complicated dumbbell-like wake pattern around the outer thimble,but also results in inner flow inside the PVC pipe.The velocity of the inner flow increases with the frequency of forced oscillation. 相似文献
14.
基于控制尾流,阻止立管尾流漩涡脱落转换路径的涡激振动抑制机理,设计三角形尾翼、片状尾翼及交错尾翼等三种抑振装置。三种抑振装置分别安装于立管模型表面,立管模型采用外径为18 mm的透明有机玻璃管。通过在均匀流场中进行安装有该抑振装置的立管模型涡激振动试验,研究三种抑振装置对立管涡激振动的抑制效率,并通过与配重裸管的涡激振动数据对比,分析抑振装置对立管动力响应的影响规律。研究结果表明,三种抑振装置均取得了明显的抑振效果,与配重裸管相比,安装片状尾翼及交错尾翼的立管模型抑制效率可达90%以上,安装三角形尾翼后立管模型振动频率略有减小,而安装片状尾翼及交错尾翼的立管模型没有明显的主导频率。 相似文献
15.
细长海洋立管在复杂来流作用下的涡激振动(VIV)是海洋工程领域备受关注的热点问题。采用双向流—固耦合方法,对立管在指数剪切来流作用下的涡激振动实施了数值仿真研究。基于均方根振幅包络图的显性模态分析发现,与线性剪切流工况相比,当流速较小时,立管模型在指数剪切流作用下振幅最大值相对较小;流速较大时,指数剪切流的非线性分布致使立管的振动响应增强。通过对立管模型均方根振幅包络峰、谷处的振动响应频率分析发现,在波峰位置处振动频率单一且较为稳定,而在相邻波谷位置处多频共存现象显著,两者有显著差异。沿管的轴向波形主要表现为驻波主导和驻波—行波混合模式,行波一般间歇发生,流速越大发生频次愈高,其在横流向的传播方向通常由高流速区段传递至低流速区段。指数剪切流作用下,沿管体轴向各截面位置处的旋涡脱落模式差异显著,高流速段尾流区的旋涡发放具有较强的周期性,涡管完整且与管轴存在一定偏离角度,低流速段蜂窝状离散涡旋较多。 相似文献
16.
Prediction of streamwise flow-induced vibration of a circular cylinder in the first instability range 总被引:1,自引:0,他引:1
The streamwise flow-induced vibration of a circular cylinder with symmetric vortex shedding in the first instability range is investigated, and a wake oscillator model for the dynamic response prediction is proposed. An approach is applied to calibrate the empirical parameters in the present model; the numerical and experimental results are compared to validate the proposed model. It can be found that the present prediction model is accurate and sufficiently simple to be easily applied in practice. 相似文献
17.
Control of Vortex Shedding at Moderate Reynolds Numbers 总被引:1,自引:0,他引:1
The suppression method of vortex shedding from a circular cylinder has been studied experimentally in the Reynolds number range from 300 to 1600. The test is performed in a water channel. The model cylinder is 1 cm in diameter and 38 cm in length. A row of small rods of 0.18 cm in diameter and 1 .5 cm in length are perpendicularly connected to the surface of the model cylinder and distributed along the meridian. The distance between the neighboring rods and the angle of attack of the rods can be changed so that the suppression effect on vortex shedding can be adjusted. The results show that vortex shedding can be suppressed effectively if the distance betvveen the neighboring rods is smaller than 3 times and the cylinder diameter and the angle of attack is in the range of 30°≤β < 90° 相似文献
18.
The dynamics of jacket supported offshore wind turbine (OWT) in earthquake environment is one of the progressing focuses in the renewable energy field. Soil-structure interaction (SSI) is a fundamental principle to analyze stability and safety of the structure. This study focuses on the performance of the multiple tuned mass damper (MTMD) in minimizing the dynamic responses of the structures objected to seismic loads combined with static wind and wave loads. Response surface methodology (RSM) has been applied to design the MTMD parameters. The analyses have been performed under two different boundary conditions: fixed base (without SSI) and flexible base (with SSI). Two vibration modes of the structure have been suppressed by multi-mode vibration control principle in both cases. The effectiveness of the MTMD in reducing the dynamic response of the structure is presented. The dynamic SSI plays an important role in the seismic behavior of the jacket supported OWT, especially resting on the soft soil deposit. Finally, it shows that excluding the SSI effect could be the reason of overestimating the MTMD performance. 相似文献