Shelf-edge deltas and drowned barrier–island complexes on the northwest Florida outer continental shelf

A high-resolution multibeam survey of the northwest Florida shelf mapped six relict shelf-edge deltas, each with a drowned barrier–island system developed on its south and southwestern rims. The deltas appear to have formed during periods of sea-level stasis that occurred between 58,000 and 28,000 years ago. The barrier islands formed on the deltas during periods of slow regression during this same time interval. Large fields of asymmetric dunes are found on the delta surfaces as well as on the south and southwestern flanks of the deltas. The asymmetry and orientation of the dunes suggest that a northward-flowing current was sheared by the presence of the delta topography, and as a result, the upper layer of the flow continued to the north, whereas the lower layer was steered by the topography. The topographic steering accelerated the northward flow around the south and southwestern flanks with speeds adequate to form large dunes. The flow slowed after rounding southwestern flank but accelerated again as it encountered the next delta flank to the north. The age of the dune formation is unknown, and no northward-flowing geostrophic flow has been reported in the literature from this area.     

What is the topset of a shelf-margin prism?

The siliciclastic topset of a continental margin, or a shelf-margin prism in subsiding nonplate-margin deepwater basins, is the flat-lying upper part of the margin succession; it is coeval basinwards with deepwater slope clinoforms. Topsets develop by the aggradation of repeated, cross-shelf, shoreline regressions and transgressions, thereby hosting the shelf portion of stacked, fourth-order stratigraphic sequences. Sediment spreading downdip and along strike during the cross-shelf transit of the sediment delivery system, as well as process regime changes of deltas and shorefaces (regressive) and of estuaries, barrier–lagoon systems and shelf ridges (transgressive) are highly variable over short distances, so that correlation within a single stratigraphic sequence is far more difficult than correlation of the cross-shelf maximum flooding surface boundaries. Thickness of individual regressive–transgressive, fourth-order sequences is given by shelf accommodation, typically <10 m in embayment or on the inner shelf and up to 200 m on outer shelf. Tectonic subsidence and compaction will enhance this thickness only if rates are very high compared to shelf-transit time. In very high subsidence rate settings, the transgressive tracts are well preserved and often thickly developed. Topset sequences in an Icehouse climate setting tend to have a high proportion and greater landward development of marine vs nonmarine deposits, compared to Greenhouse sequences, because of the importance of eustatic rise of sea level in the former. Previous numerical experiments show that even for very wide shelves and irrespective of Icehouse or Greenhouse conditions, deltas rarely take more than 10 s of ky to reach their shelf edge, suggesting that it is fourth-order (or higher) sequences that are the fundamental ones in sequence stratigraphy.     

Field observations of recent transgression on northern and eastern Melville Island, western Canadian Arctic Archipelago

After ~ 11,000 years of glacio-isostatically induced forced regression, geomorphological evidence indicates that the coastline of eastern Melville Island, western Canadian Arctic Archipelago, is now being transgressed. Recently developed coastal features associated with this transgression include: drowned gullies and small estuaries, barriers and lagoons, barrier islands, erosional notches, backstepping beaches, and drowned tundra vegetation and vehicle tracks dating from the 1970s. We mainly attribute this relative sea-level rise to the eastward migration of a peripheral crustal forebulge. Furthermore, the reported transgression also includes a component from recent eustatic sea-level rise during the 20th century. Recent earthquakes recorded in the Gustav-Lougheed Arch Seismic Zone located in Byam Martin Channel, 70 km east of Melville Island, suggest that neotectonics could also be involved in local relative sea-level adjustments. Other factors associated with global warming, especially the formation of an earlier shore-ice lead coupled with increased storm activity might also be responsible for some of the coastal changes. Our study indicates that the current zero isobase, separating areas of net transgression from those of net regression, is now located off the east coast of the island. Our field observations support recent glacio-isostatic modelling that shows the island is presently undergoing a transgression.     

Criteria for recognizing shelf-slope clinoforms in outcrop; Jurassic Lajas and Los Molles formations,S. Neuquén Basin,Argentina

Seismic-reflection data show that most deepwater (>200 m water depth) basins are filled by sand and mud dispersed across clinoformal geometries characterized by gently dipping topsets, steeper foresets and gently dipping bottomsets. However, the entire geometry of these ubiquitous clinoforms is not always recognized in outcrops. Sometimes the infill is erroneously interpreted as “layer cake” or “ramp” stratigraphy because the topset-foreset-bottomset clinoforms are not well exposed. Regional 2-D seismic lines show clinoforms in the Lower to Middle Jurassic Challaco, Lajas, and Los Molles formations in S. Neuquén Basin in Argentina. Time equivalent shelf, slope and basin-floor segments of clinoforms are exposed, and can be walked out in hundreds of metres thick and kilometres-wide outcrops. The studied margin-scale clinoforms are not representing a continental-margin but a deepwater shelf margin that built out in a back-arc basin. Lajas-Los Molles clinoforms have been outcrop-mapped by tracing mudstones interpreted as flooding surfaces on the shelf and abandonment surfaces (low sedimentation rate) in the deepwater basin. The downslope and lateral facies variability in the outcrops is also consistent with a clinoform interpretation. The Lajas topset (shelf) is dominated by fluvial and tidal deposits. The shelf-edge rollover zone is occasionally occupied by a 40–50-m-thick coarse-grained shelf-edge delta, sometimes incising into the underlying slope mudstones, producing oblique clinoforms expressing toplap erosion on seismic. A muddy transgressive phase capping the shelf-edge deltas contains tidal sandbodies. Shelf-edge deltas transition downslope into turbidite- and debris flow-filled channels that penetrate down the mud-prone Los Molles slope. At the base-of-slope, some 300m below the shelf edge, there are basin-floor fan deposits (>200 m thick) composed of sandy submarine-fan lobes separated by muddy abandonment intervals. The large-scale outcrop correlation between topset–foreset–bottomset allows facies and depositional interpretation and sets outcrop criteria recognition for each clinoform segment.     

Miocene shelf‐edge deltas and their impact on deepwater slope progradation and morphology,Northwest Shelf of Australia

Late‐middle Miocene to Pliocene siliciclastics in the Northern Carnarvon Basin, Northwest Shelf of Australia, are interpreted as having been deposited by deltas. Some delta lobes deposited sediments near and at the shelf break (shelf‐edge deltas), whereas other lobes did not reach the coeval shelf break before retreating landward or being abandoned. Shelf‐margin mapview morphology changes from linear to convex‐outward in the northern part of the study area where shelf‐edge deltas were focused. Location and character of shelf‐edge deltas also had significant impact on along‐strike variability of margin progradation and shelf‐edge trajectory. Total late‐middle and late Miocene margin progradation is ca. 13 km in the south, where there were no shelf‐edge deltas, vs. ca. 34 km in the north where shelf‐edge deltas were concentrated. In the central area, the deltas were arrested and accumulated a few kilometres landward of the shelf break, resulting in an aggradational shelf‐edge trajectory, in contrast to the more progradational trajectory farther north. This illustrates a potential limitation of shelf‐edge trajectory analysis: only where shelf‐edge deltas occur, there is sufficient sediment available for the shelf‐edge trajectory to record relative sea‐level fluctuations reliably. Small‐scale (ca. 400 m wide) incisions were already conspicuous on the coeval slope even before deltas reached the shelf break. However, slope gullies immediately downdip from active shelf‐edge deltas display greater erosion of underlying strata and are wider and deeper (>1 km wide, ca. 100 m deep) than coeval incisions that are laterally offset from the deltaic depocenter (ca. 0.7 km wide, ca. 25 m deep). We interpret this change in slope‐gully dimensions as the result of greater erosion by sediment gravity flows sourced from the immediately adjacent shelf‐edge deltas. Similarly, gullies also incised further (up to 6 km) into the outer shelf in the region of active shelf‐edge deltas.     

Stratigraphic evolution of the upper slope and shelf edge in the Karoo Basin, South Africa

The Permian Ecca Group of the Karoo Basin, South Africa preserves an extensive well-exposed siliciclastic basin floor, slope and shelf-edge delta succession. The Kookfontein Formation includes multiple sedimentary cycles that display clinoform geometries and are interpreted to represent the deposits of a slope to shelf succession. The succession exhibits progradational followed by aggradational stacking of deltaic cycles that is related to a change in shelf-edge trajectory, and lies within two depositional sequences. Sediment was transferred to the slope via overextension of deltas onto and over the shelf edge, resulting in failure and re-adjustment of local slope gradients. The depositional facies and architecture of the Kookfontein Formation record the change from a bypass- to accretion-dominated margin, which is interpreted to reflect a decrease in sediment transport efficiency as the slope gradient decreased, slope length increased and shelf-edge trajectory rose. During this time the delivery system changed from point-sourced basin-floor fans fed by slope channels to starved basin-floor with sand-rich slope clinoforms. This is an example of a progradational margin in which the younger slope system is interpreted to be of a different style to the older slope system that fed the underlying sand-rich basin floor fans.     

Geomorphic evidence of major sea-level fluctuations during marine isotope substage-5e, Cape Cuvier, Western Australia

A detailed geomorphologic and morphostratigraphic investigation of raised marine terraces at Cape Cuvier, Western Australia, reveals two morphologically distinct units. A lower, well-developed accretional reef terrace between 3 and 5.5 m above MLWS (mean low-water springs; hereafter denoted as “+”) represents an extended interval of stable sea level. An upper erosional terrace and incipient coralgal rim between + 8.5 to 10.5 m represents a brief sea-level stillstand at this higher elevation. These features suggest the lower and upper terraces developed during discrete sea-level events. In an attempt to better define the timing of emplacement of each marine unit, 20 coral samples collected along vertical and lateral reef growth axis from both terraces were analysed with U-series dating. Unfortunately, all coral samples exhibited elevated δ²³⁴U_initial values, suggesting that pervasive uptake of ²³⁴U-enriched uranium and ²³⁰Th thorium had occurred. Despite the shortcomings of absolute dating, a succession of events can be resolved though morphostratigraphic relationships. Comparison of the facies relationships, coral growth, and morphostratigraphic features between the lower and upper terraces indicates that an early to mid MIS 5e stillstand at + 3 to 5 m was followed by a late rise to + 8.5 to 10.5 m. This agrees with an emerging global view of MIS 5e sea-level history derived from stable carbonate platforms, rejecting the hypothesis that these higher sea-level benchmarks are an artefact of localized tectonic processes.     

华南末次冰期盛期最低海面问题

本文从陆架残留砂、水下海滩岩、陆架残留地貌、海底岩芯、珊瑚礁沉积间断、陆域侵蚀沉积反映等方面，综合考虑海面下降、陆架均衡沉降、构造活动、海流潮流波浪的再造作用等多种因素，认为华南末次冰期盛期的最低海南可能是－８０ｍ左右。     

Influence of point-source sediment-supply on modern shelf-slope morphology: implications for interpretation of ancient shelf margins

Present sea-floor bathymetry indicates that the continental-shelf and shelf-break morphology have some unique and predictable characteristics in areas with and without high sediment supply. Using a global bathymetry dataset in open shelf areas in front of rivers that discharge over 25 × 10⁶ tons of sediment per year, five distinct accretionary types of shelf-break are distinguished based on along-shelf gradient variability and inferred shelf-break trajectory. Morphological characteristics of river-mouth shelves (compared with adjacent areas lateral to the immediate fairway of the river) are: (1) an overall lower gradient and greater width, and (2) a relatively high slope gradient/shelf gradient ratio. The exceptions are shelves with active shelf-edge deltas; these are narrower, steeper and have an attenuated shelf break in front of rivers. These observations are at seismic scale and have direct implications for the recognition and positioning of principal cross-shelf, supply fairways on ancient shelves or shelf margins, and therefore the potential by-pass routes for deepwater sands. Higher slope/shelf gradient ratios in areas of actively accreting margins, where the shelf-break is more prominent and easier to recognize on seismic data compared with adjacent areas, predict areas with high sediment supply. Along-strike morphological changes on supply-dominated shelves suggest that identification of the sediment-feed route and depocenter relative to the shelf break during a relative sea level cycle are critical for understanding/predicting the 3-D architecture of the shelf-slope-basin floor clinoform.     

Middle Miocene–Pliocene siliciclastic influx across a carbonate shelf and influence of deltaic sedimentation on shelf construction,Northern Carnarvon Basin,Northwest Shelf of Australia

Middle Miocene to Pliocene siliciclastics of the Bare Formation represent a long‐lived (ca. 11 Myr) break in the otherwise carbonate‐dominated shelf of the Northern Carnarvon Basin, Northwest Shelf of Australia. The quartz‐sandstone interval is correlated with the appearance of spectacular clinoform sets mapped on 3D and dense 2D seismic data. Twenty‐seven clinoform sets are interpreted as delta lobes primarily based on their plan‐view morphology (strike‐elongate to lobate features) and their 40–100‐m‐high clinoform amplitudes. The delta lobes were deposited on outer‐shelf to shelf‐edge positions, and the older deltas show evidence of a higher degree wave reworking than the younger deltas. Measurements of the along‐strike (migration) and down‐dip (progradation) movement of these deltas are compared with relative sea‐level behaviour inferred from shelf‐edge trajectory analysis. Delta lobes exhibit greater lateral shifting during relative sea‐level rise, whereas delta lobes are more restricted to dip‐oriented fairways during sea‐level fall, although no major incised valleys have been identified. Long‐term (cumulative) progradation of this delta system and subsequent backstepping correlates with long‐term sea‐level fall and rise during the late middle and late Miocene. In addition, a long‐term northeastward migration trend for these delta lobes was likely a result of localized uplift of an inversion anticline in the Rosemary–Legendre Trend; the growth of this anticline probably steered the fluvial source for the delta system towards the northeast. The Bare Formation siliciclastic influx correlates with other middle Miocene increases in siliciclastic sediment supply worldwide. Global cooling and a shift to more arid conditions, negatively influencing vegetation cover, may have combined with more seasonally variable rainfall to generate the high sediment supply that built the deltas. Retreat of the siliciclastics could correlate with ice‐sheet growth in the Northern Hemisphere and/or increase in the Indonesian Throughflow and Leeuwin Current (ca. 1.6 Ma), which might have modified climate regionally.     

Internal structure of a barrier beach as revealed by ground penetrating radar (GPR): Chesil beach, UK

Chesil Beach (Dorset) is one of the most famous coastal landforms on the British coast. The gravel beach is over 18 km long and is separated for much of its length from land by a tidal lagoon known as The Fleet. The beach links the Isle of Portland in the east to the mainland in the west. Despite its iconic status there is little available information on its internal geometry and evolutionary history. Here we present a three-fold model for the evolution of Chesil Beach based on a series of nine ground penetrating radar (GPR) traverses located at three sites along its length at Abbotsbury, Langton Herring and at Ferry Bridge. The GPR traverses reveal a remarkably consistent picture of the internal structure of this barrier beach. The first phase of evolution involves the landward transgression of a small sand and gravel beach which closed upon the coast leading to deposition of freshwater peat between 5 and 7 k yr BP. The second evolutionary phase involves the ‘bulking-out’ of the beach during continued sea level rise, but in the presence of abundant gravel supplied by down-drift erosion of periglacial slope deposits. This episode of growth was associated with a series of washover fans which accumulated on the landward flank of the barrier increasing its breadth and height but without significant landward transgression of the barrier as a whole. The final phase in the evolution of Chesil Beach involves the seaward progradation of the beach crest and upper beach face associated with continued sediment abundance, but during a still-stand or slight fall in relative sea level. This phase may provide further evidence of a slight fall in relative sea level noted elsewhere along the South Coast of Britain and dated to between 1.2 and 2.4 k yr BP. Subsequently the barrier appears to have become largely inactive, except for the reworking of sediment on the beach face during storm events. The case study not only refines the evolutionary picture of Chesil Beach, but illustrates the importance of the subtle interplay between relative sea level and sediment supply in the evolution of a barrier system. In addition, it also illustrates the potential of GPR in resolving the evolutionary history of gravel-rich coastal landforms such as Chesil Beach.     

Sequence architecture and depositional evolution of the northern continental slope of the South China Sea: responses to tectonic processes and changes in sea level

The continental slopes of the South China Sea (SCS), the largest marginal sea on the continental shelf of Southeast Asia, are among the most significant shelf‐margin basins in the world because of their abundant petroleum resources and a developmental history related to sea floor spreading since Late Oligocene time. Based on integrated analyses of seismic, well‐logging and core data, we systematically document the sequence architecture and depositional evolution of the northern continental slope of the SCS and reveal its responses to tectonism, sea‐level change and sediment supply. The infill of this shelf‐margin basin can be divided into seven composite sequences (CS1–CS7) that are bounded by regional unconformities. Composite sequences CS3 to CS7 have formed since Late Oligocene time, and each of them generally reflects a regional transgressive–regressive cycle. These large cycles can be further divided into 20 sequences that are defined by local unconformities or transgressive–regressive boundaries. Depositional–geomorphological systems represented on the continental slope mainly include shelf‐edge deltas, prodelta‐slope fans, clinoforms of the shelf‐margin slope, unidirectionally migrating slope channels, incised slope valleys, muddy slope fans, slope slump‐debris‐flow complexes and large‐scale soft‐sediment deformation of bedding. Changing sea levels, reflected by evidence from sequence architecture in the study area, are generally comparable with those of the Haq (1987) global sea level curve, whereas the regional transgressions and regressions were apparently controlled by tectonic uplift and subsidence. Composite sequences CS3 and CS4 formed from Late Oligocene to Middle Miocene time and represent continental‐slope deposition during a time of northwest‐northeast seafloor spreading and subsequent development of sub‐basins in the southwest‐central SCS. The development of composite sequences CS5 to CS7 after Middle Miocene time was obviously influenced by the Dongsha Movement during convergence between the SCS and Philippine Sea plates. Climatic variations and monsoon intensification may have enhanced sediment supply during Late Oligocene‒Early Miocene (25–21 Ma) and Late Pliocene‒Pleistocene (3–0.8 Ma) times. This study indicates that shelf‐edge delta and associated slope fan systems are the most important oil/gas‐bearing reservoirs in the SCS continental‐slope area.     

Quantifying sand delivery to deep water during changing sea-level: Numerical models from the Quaternary Brazos Icehouse continental margin

Sequence stratigraphy for clastic continental margins predicts the development of sand-rich turbidite deposits during specific times in relation to base-level cycles. It is now widely understood that deltas can extend to the shelf-edge forced by high sediment flux and/or base level, providing a direct connection to transfer sediment and sand to the slope and basin floor even during high base level periods. Herein, we build a stratigraphic forward model for the last 120 kyr of the fluvio-deltaic to deep-water Brazos system (USA) where sediment partitioning along an Icehouse continental margin can be evaluated. The reduced-complexity stratigraphic forward model employs geologically constrained input parameters and mass balance. The modelled architecture is consistent with the location of depositional units previously mapped in the shelf. Sand bypasses the shelf and upper slope between 35 to 15 kyr before present and only about 20%–30% of all the sediment and sand supplied to the system is transferred to deep water. Several scenarios based on the initial Brazos model investigate the relationships between base level and deep-water sand ratio (DWSR). DWSR is defined as the relative amount of sand transferred to the deep-water portions of the system subdivided by the total sand input to the model. Linear correlations between DWSR and base level change rates or base level are very poor. Short-term variability due to local processes (for example avulsions) is superimposed to the long-term trends and mask the base level signal. DWSR for an entire base-level cycle is mainly controlled by the proportion of time the delta stays docked at the shelf-edge. Stratigraphic forward models are useful to complement field observations and quantify how different processes control stratigraphy, which is important for making predictions in areas with limited information.     

Chronology of relict lake deposits in the Spiti River, NW Trans Himalaya: Implications to Late Pleistocene–Holocene climate-tectonic perturbations

The Spiti River that drains through the arid Trans-Himalayan region is studied here. The relict deposits exposed along the river provide an opportunity to understand the interaction between the phases of intense monsoon and surface processes occurring in the cold and semi arid to-arid Trans-Himalayan region. Based on geomorphological observation the valley is broadly divided into the upper and lower Spiti Valley. The braided channel and the relict fluvio-lacustrine deposits rising from the present riverbed characterize the upper valley. The deposits in the lower valley occur on the uplifted bedrock strath and where the channel characteristics are mainly of meandering nature. Conspicuous is the occurrence of significantly thick lacustrine units within the relict sedimentary sequences of Spiti throughout the valley. The broad sedimentary architecture suggests the formation of these palaeolakes due landslide-driven river damming. The Optically Stimulated Luminescence (OSL) dating of quartz derived from the bounding units of the lacustrine deposits suggests that the upper valley preserves the phase of deposition around 14–6 ka and in the lower valley around 50–30 ka. The review of published palaeoclimatic palaeolake chronology of Spiti Valley indicates that the lakes were probably formed during the wetter conditions related to Marine Isotope Stage III and II. The increased precipitation during these phases induced excessive landsliding and formation of dammed lakes along the Spiti River. The older lacustrine phase being preserved on the uplifted bedrock strath in the lower valley indicates late Pleistocene tectonic activity along the Kaurick Chango normal fault.     

Theoretical constraints and chronological evidence of Holocene coastal development in central and southern New South Wales, Australia

Holocene coastal evolution in New South Wales has been interpreted essentially as the unfolding of the impact of marine transgression. Sea level on this coast supposedly reached its present height at 6–6.5 ka, and varied < 1 m since then. The early Holocene rise of the sea has been considered the key factor (“forcing function”) in dune migration, coastal sand barrier development, and the evolution of estuaries. Episodic storminess during the late Holocene has been seen as an important, though secondary, factor in beach erosion and dune mobilisation. An alternate interpretation presented here challenges the concept of the marine transgression as the primary “forcing function”. It (a) attributes early Holocene dune mobilisation to climate rather than the rising sea; (b) shows that the sea reached its present level by 7 ka and rose to at least + 2 m until 1.5 ka; (c) links late Holocene dune activity to local disruption of vegetation rather than to regional episodic storminess; (d) demonstrates a fall of 2°C in sea surface temperature after 3 ka that coincides with the onset of barrier erosion; (e) recognises the imprint of at least three tsunamis in the coastal sedimentary record.     

Deep-seated failure propagation in a fractured rock slope over 10,000 years: The La Clapière slope, the south-eastern French Alps

The “La Clapière” area (Tinée valley, Alpes Maritimes, France) is a typical large, complex, unstable rock slope affected by Deep Seated Gravitational Slope Deformations (DGSD) with tension cracks, scarps, and a 60 × 10⁶ m³ rock slide at the slope foot that is currently active. The slope surface displacements since 10 ka were estimated from ¹⁰Be ages of slope gravitational features and from morpho-structural analyses. It appears that tensile cracks with a strike perpendicular to the main orientation of the slope were first triggered by the gravitational reactivation of pre-existing tectonic faults in the slope. A progressive shearing of the cracks then occurred until the failure of a large rock mass at the foot of the slope. By comparing apertures, variations and changes in direction between cracks of different ages, three phases of slope surface displacement were identified: 1) an initial slow slope deformation, spreading from the foot to the top, characterized by an average displacement rate of 4 mm yr^− 1, from 10–5.6 ka BP; 2) an increase in the average displacement rate from 13 to 30 mm yr^− 1 from the foot to the middle of the slope, until 3.6 ka BP; and 3) development of a large failure at the foot of the slope with fast displacement rates exceeding 80 mm yr^− 1 for the last 50 years. The main finding of this study is that such a large fractured slope destabilization had a very slow displacement rate for thousands of years but was followed by a recent acceleration. The results obtained agree with several previous studies, indicating that in-situ monitoring of creep of a fractured rock slope may be useful for predicting the time and place of a rapid failure.     

Rock varnish microlamination dating of late Quaternary geomorphic features in the drylands of western USA

Varnish microlamination (VML) dating is a correlative age determination technique that can be used to date and correlate various geomorphic features in deserts. In this study, we establish a generalized late Quaternary (i.e., 0–300 ka) varnish layering sequence for the drylands of western USA and tentatively correlate it with the SPECMAP oxygen isotope record. We then use this climatically correlated varnish layering sequence as a correlative dating tool to determine surface exposure ages for late Quaternary geomorphic features in the study region. VML dating of alluvial fan deposits in Death Valley of eastern California indicates that, during the mid to late Pleistocene, 5–15 ky long aggradation events occurred during either wet or dry climatic periods and that major climate shifts between glacial and interglacial conditions may be the pacemaker for alteration of major episodes of fan aggradation. During the Holocene interglacial time, however, 0.5–1 ky long brief episodes of fan deposition may be linked to short periods of relatively wet climate. VML dating of alluvial desert pavements in Death Valley and the Mojave Desert reveals that pavements can be developed rapidly (< 10 ky) during the Holocene (and probably late Pleistocene) in the arid lowlands (< 800 m msl) of these regions; but once formed, they may survive for 74–85 ky or even longer without being significantly disturbed by geomorphic processes operative at the pavement surface. Data from this study also support the currently accepted, “being born at the surface” model of desert pavement formation. VML dating of colluvial boulder deposits on the west slope of Yucca Mountain, southern Nevada, yields a minimum age of 46 ka for the emplacement of these deposits on the slope, suggesting that they were probably formed during the early phase of the last glaciation or before. These results, combined with those from our previous studies, demonstrate that VML dating has great potential to yield numerical age estimates for various late Quaternary geomorphic features in the western USA drylands.     

The Svalbard Eocene‐Oligocene (?) Central Basin succession: Sedimentation patterns and controls

A synthesis has been undertaken based on regionally compiled data from the post early Eocene foreland basin succession of Svalbard. The aim has been to generate an updated depositional model and link this to controlling factors. The more than kilometer thick progradational succession includes the offshore shales of the Gilsonryggen Member of the Frysjaodden Formation, the shallow marine sandstones of the Battfjellet Formation and the predominantly heterolithic Aspelintoppen Formation, together recording the progressive eastwards infill of the foredeep flanking the West Spitsbergen fold‐and‐thrust belt. Here we present a summary of the paleo‐environmental depositional systems across the basin, their facies and regional distribution and link these together in an updated depositional model. The basin‐margin system prograded with an ascending shelf‐edge trajectory in the order of 1°. The basin fill was bipartite, with offset stacked shelf and shelf‐edge deltas, slope clinothems and basin floor fans in the western and deepest part and a simpler architecture of stacked shelf‐deltas in the shallower eastern part. We suggest a foredeep setting governed by flexural loading, likely influenced by buckling, and potentially developing into a wedge top basin in the mature stage of basin filling. High‐subsidence rates probably counteracted eustatic falls with the result that relative sea‐level falls were uncommon. Distance to the source terrain was small and sedimentation rates was temporarily high. Time‐equivalent deposits can be found outbound of Stappen High in the Vestbakken Volcanic Province and the Sørvestsnaget Basin 300 km further south on the Barents Shelf margin. We cannot see any direct evidence of coupling between these more southerly systems and the studied one; southerly diversion of the sediment‐routing, if any, may have taken place beyond the limit of the preserved deposits.     

Transverse Aeolian Ridges (TARs) on Mars

Aeolian processes are probably the dominant ongoing surface process on Mars; Large Dark Dunes (LDDs), particularly common aeolian landforms, were first recognized in the early 1970s. Recent, higher resolution images have revealed another, morphologically distinct, large population of smaller, ripple-like aeolian bedforms that have been termed “Transverse Aeolian Ridges” (TARs) as it is unknown whether they formed as large ripples or small dunes. We have begun a new study of TARs that examines their distribution, orientation, and morphology using > 10,000 high-resolution Mars Orbiter Camera (1.5 to 8 m/pixel resolution) images in a 45° longitude wide, pole-to-pole survey. The aim of this study is to assess whether TARs are active, to identify possible sediment sources and pathways, and to determine the volumes of sediment that they comprise. We present results from the first half of this study, in which we examine the northern hemisphere, and describe a new three-part classification scheme used to aid the survey.Our results show that TARs are abundant but not ubiquitous: preferentially forming proximal to friable, layered terrains such as those found in Terra Meridiani — the location of the ongoing Mars Exploration Rover “Opportunity” mission. TAR distribution in the northern hemisphere shows a strong latitudinal dependence with very few TARs being found north of  30° N. We also find that in most cases TARs are less mobile than LDDs, a conclusion possibly explained by Mars Exploration Rover Opportunity observations that show TAR-like ripples to have a core of fine material armored by a monolayer of granule-sized particles. This could disallow significant bedform movement under the current wind regime. That TARs are essentially inactive is confirmed by superposition relations with slope streaks and LDDs and by observations of superposed impact craters. We suggest that observations made by the Opportunity Rover in Terra Meridiani indicate that the small aeolian bedforms common here are ripples and not small dunes. Farther south, these bedforms transition into larger features indistinguishable from TARs, suggesting that TARs (in the Meridiani area at least) are ripples and not dunes.     

Flux and fate of Yangtze River sediment delivered to the East China Sea

Numerous cores and dating show the Yangtze River has accumulated about 1.16 × 10¹² t sediment in its delta plain and proximal subaqueous delta during Holocene. High-resolution seismic profiling and coring in the southern East China Sea during 2003 and 2004 cruises has revealed an elongated ( 800 km) distal subaqueous mud wedge extending from the Yangtze River mouth southward off the Zhejiang and Fujian coasts into the Taiwan Strait. Overlying what appears to be a transgressive sand layer, this distal clinoform thins offshore, from  40 m thickness between the 20 and 30 m water depth to < 1–2 m between 60 and 90 m water depth, corresponding to an across shelf distance of less than 100 km. Total volume of this distal mud wedge is about 4.5 × 10¹¹ m³, equivalent to  5.4 × 10¹¹ t of sediment. Most of the sediment in this mud wedge comes from the Yangtze River, with some input presumably coming from local smaller rivers. Thus, the total Yangtze-derived sediments accumulated in its deltaic system and East China Sea inner shelf have amounted to about 1.7 × 10¹² t. Preliminary analyses suggest this longshore and across-shelf transported clinoform mainly formed in the past 7000 yrs after postglacial sea level reached its mid-Holocene highstand, and after re-intensification of the Chinese longshore current system. Sedimentation accumulation apparently increased around 2000 yrs BP, reflecting the evolution of the Yangtze estuary and increased land erosion due to human activities, such as farming and deforestation. The southward-flowing China Coastal Current, the northward-flowing Taiwan Warm Current, and the Kuroshio Current appear to have played critical roles in transporting and trapping most of Yangtze-derived materials in the inner shelf, and hence preventing the sediment escape into the deep ocean.