Synthesis and characterization of Mn-bearing ilvaite CaFe 2−x 2+ MnxFe3+ [Si2O7/O/(OH)]

Summary Synthesis of Mn-bearing ilvaites, CaFe _2–x ²⁺ Mn_xFe³⁺ [Si₂O₇/O/(OH)], with 0 x 0.19, have been performed under hydrothermal conditions at 2 and 3 kbars, T = 300 -400°C and at oxygen fugacities defined by the Fe₂O₃/Fe₃O₄ - and the Ni/NiO -buffer. As shown by X-ray diffraction, the substitution of Fe²⁺ by Mn²⁺ decreases the monoclinic angle and causes a phase transition from monoclinic to orthorhombic at x = 0.19. The Fe-distribution has been determined by Mössbauer spectroscopy.

---

Synthese und Charakterisierung von Mn-haltigem Ilvait CaFe _2–x ²⁺ Mn_xFe³⁺ [Si₂O₇/O/(OH)]

Zusammenfassung Mn-haltiger Ilvait CaFe _2–x ²⁺ Mn_x Fe³⁺ [Si₂O₇/O/(OH)] wurde unter hydrothermalen Bedingungen bei Drucken von 2 und 3 kbar, Temperaturen zwischen 300 und 400°C und bei Sauerstoff Fugazitäten, die durch Festkörperpuffer (Fe₂O₃/Fe₃O₄ und Ni/NiO) kontrolliert wurden, hergestellt. Röntgenbeugungsuntersuchungen zeigen, daß mit steigendem Mn-Einbau der monokline Winkel kleiner wird, und daß bei x = 0.19 ein Phasenübergang von der monoklinen zur orthorhombischen Struktur erfolgt. Die Fe-Verteilung wurde mit Mössbauer-Spektroskopie bestimmt.

---

---

With 4 Figures     

High pressure X-ray diffraction study of ilvaite CaFe 2 2+ Fe3+[Si2O7/O/(OH)]

An in situ high pressure X-ray diffraction study on synthetic pure ilvaite powder has been performed using a diamond anvil cell. A phase transition from monoclinic to orthorhombic (Pbnm) has been observed at 2.25 Gpa, which can be described as a λ-transition.     

Crystallographic phase transition and valence fluctuation in synthetic mn-bearing ilvaite CaFe2+ 2-x Mn2+ xFe3+ [Si2O7/O/(OH)]

The dependence of the electronic and the crystallographic structure on temperature of synthetic Mnbearing ilvaites CaFe²⁺ _2-xMn²⁺ _xFe³⁺ [Si₂O₇/O/OH] with 0≤x≤0.19 has been investigated. The change of the electronic structure was studied by ⁵⁷Fe Mössbauer spectroscopy. The spectra show an increasing valence fluctuation rate between Fe²⁺ and Fe³⁺ in the double chain of edge-sharing octahedra with increasing temperature resulting in a mixed valent state of iron. The valence fluctuation rate is distinctly increased by the Mnsubstitution. The temperature of the crystallographic phase transition T _x as studied by a high temperature Guinier method is distinctly lowered by the Mn-substitution (x = 0.0, T _x=390K; x = 0.12, T _x =370K; x = 0.19, T _x=295K). The reasons for this behaviour are discussed in terms of Fe^{2 +}, Fe^{3 +} cation order-disorder, electronic relaxation rate, and relaxation of the lattice. In the monoclinic phase there is electron hopping between Fe^{2 +}, Fe^{3 +} pairs whereas in the orthorhombic phase there is extended electron delocalization via a narrow, d-band mechanism.     

Thermophysical properties of ilvaite CaFe 2 2+ Fe3+Si2O7O (OH); heat capacity from 7 to 920 K and thermal expansion between 298 and 856 K

The heat capacity of ilvaite from Seriphos, Greece was measured by adiabatic shield calorimetry (6.4 to 380.7 K) and by differential scanning calorimetry (340 to 950 K). The thermal expansion of ilvaite was also investigated, by X-ray methods, between 308 and 853 K. At 298.15 K the standard molar heat capacity and entropy for ilvaite are 298.9±0.6 and 292.3±0.6 J/(mol. K) respectively. Between 333 and 343 K ilvaite changes from monoclinic to orthorhombic. The antiferromagnetic transition is shown by a hump in C _p ⁰ with a Néel temperature of 121.9±0.5 K. A rounded hump in C _p ⁰ between 330 and 400 K may possibily arise from the thermally activated electron delocalization (hopping) known to take place in this temperature region.     

Synthesis and physical properties of piemontite Ca2Al3-pMn p 3+ (Si2O7/SiO4/O/OH)

Mn³⁺-bearing piemontites and orthozoisites, Ca₂(Al_3-pMn³⁺ _p)-(Si₂O₇/SiO₄/O/OH), have been synthesized on the join Cz (p = 0.0)-Pm (p = 3.0) of the system CaO-Al₂O₃-(MnO·MnO₂)-SiO₂-H₂O atP = 15 kb,T= 800 °C, and \(f_{O_2 } \) of the Mn₂O₃/MnO₂ buffer. Pure Al-Mn³⁺-piemontites were obtained with 0.5≦p≦1.75, whereas atp=0.25 Mn³⁺-bearing orthozoisite (thulite) formed as single phase product. The limit of piemontite solid solubility is found near p=1.9 at the above conditions. Withp>1.9, the maximum piemontite coexisted with a new high pressure phase CMS-X1, a Ca-bearing braunite (Mn _0.2 ²⁺ Ca_0.8)Mn ₆ ³⁺ O₈(SiO₄), and quartz. Al-Mn³⁺-piemontite lattice constants (LC),b ₀,c ₀,V ₀, increase with increasingp:

Sodium trisilicate: A new high-pressure silicate structure (Na2Si[Si2O7])

Crystals of sodium trisilicate (Na₂Si₃O₇) have been grown in the presence of melt at 9 GPa, 1200 °C using the MA6/8 superpress at Edmonton, and the X-ray structure determined at room pressure (R=2.0%). Na₂Si₃O₇ is monoclinic with a=8.922(2) Å, b= 4.8490(5) Å, c=11.567(1) Å, β=102.64(1)° (C2/c), D _x = 3.295 g·cm^-3. Silicon occurs in both tetrahedral and octahedral coordination (^[6]Si∶^[4]Si = l∶2). The SiO₄ tetrahedra form a diorthosilicate [Si₂O₇] group and are linked by the isolated SiO₆ octahedra via shared corners into a framework of 6-membered (^[4]Si-^[4]Si-^[6]Si^[4]Si-^[4] Si-^[6]Si) and 4-membered (^[4]Si-^[6]Si-^[4]Sr-^[6]Si) rings: 〈^[6]Si-O〉=1.789 Å, 〈^[4]Si-O〉= 1.625 Å, ^[4]Si-O-^[4]Si=132.9° and the bridging oxygen is overbonded (s = 2.22). Channels parallel to b-axis and [110] accommodate Na in irregular 6-fold coordination: 〈Na-O〉 = 2.511 Å.     

Synthesis and crystal structure of a triple chain silicate,Na2Mg4Si6O16(OH)2

In the system Na₂CO₃-MgO-SiO₂-H₂O a new sodium magnesium silicate was synthesized under hydrothermal conditions; 450–600 ° C and 300–1000 Kg/cm₂. The structure of the specimen was determined by X-ray powder methods, and its properties were studied by chemical, infrared and TG analyses. The specimen has a triple chain structure (space group, C2/c) with the ideal chemical composition, 4 (Na₂Mg₄Si₆O₁₆(OH)₂) and lattice parameters, a= 10.152(2), b=27.137(4), c=5.276(1) Å, and = 106.97(3) °.The essential feature of the structure is shown by the presence of SiO₄ tetrahedra linked to form chains which have three times the width of those in pyroxene. These triple chains have a periodicity, 5.27 Å, along their lengths, and are bonded to each other laterally by the brucite layer made up by eight Mg cations and sandwiched between two inward pointing bands of tetrahedra. These units are linked back to back by cations (Mg or Na) in the Na(2) site and by a large cation (Na) at the Na(1) site.     

Ab initio quantum-mechanical modeling of pyrophyllite [Al2Si4O10(OH)2] and talc [Mg3Si4O10(OH)2] surfaces

Bulk and slab geometry optimizations and calculations of the electrostatic potential at the surface of both pyrophyllite [Al₂Si₄O₁₀(OH)₂] and talc [Mg₃Si₄O₁₀(OH)₂] were performed at Hartree–Fock and DFT level. In both pyrophyllite and talc cases, a modest (001) surface relaxation was observed, and the surface preserves the structural features of the crystal: in the case of pyrophyllite the tetrahedral and octahedral sheets are strongly distorted with respect to the ideal hexagonal symmetry (and basal oxygen are located at different heights along the direction normal to the basal plane), whereas the structure of talc deviates slightly from the ideal hexagonal symmetry (almost co-planar basal oxygen). The calculated distortions are fully consistent with those experimentally observed. Although the potentials at the surface of pyrophyllite and talc are of the same order of magnitude, large topological differences were observed, which could possibly be ascribed to the differences between the surface structures of the two minerals. Negative values of the potential are located above the basal oxygen and at the center of the tetrahedral ring; above silicon the potential is always positive. The value of the potential minimum above the center of the tetrahedral ring of pyrophyllite is ?0.05 V (at 2 Å from the surface), whereas in the case of talc the minimum is ?0.01 V, at 2.7 Å. In the case of pyrophyllite the minimum of potential above the higher basal oxygen is located at 1.1 Å and it has a value of ?1.25 V, whereas above the lower oxygen the value of the potential at the minimum is ?0.2 V, at 1.25 Å; the talc exhibits a minimum of ?0.75 V at 1.2 Å, above the basal oxygen.     

Synthesis, properties and stability of end member boromuscovite, KAl2[BSi3O10](OH)2

End member boromuscovite, with nearly the ideal composition, was synthesized as a single phase from mixtures of its own composition, or with excess boron and water, at high pressures of between 15 and 30 kbar at 700 °C. The mica synthesized consists of a mixture of 2M₁ and 1M polytypes with the cell dimensions of 2M₁: a=5.071(4), b=8.786(4), c=19.830(89) Å, #=95.84(12)°, V=878.5(1.4) ų; and 1M: a=5.059(5), b=8.819(6), c=10.025(17) Å, #=101.39(57)°, V=438.4(1.3) Å. The IR spectrum shows characteristic differences relative to that of muscovite. DTA registers an endothermic peak due to dehydration breakdown above 680 °C. Seeded experiments indicate that boromuscovite is a high-pressure phase requiring minimum pressures of 3 to 10 kbar at temperatures that concomitantly increase from 300 to 750 °C. At lower pressures, the anhydrous solid assemblage K-feldspar + Al-borate (probably Al₄B₂O₉) coexists with a vapor rich in boric acid. The conversion of this assemblage to boromuscovite is connected with increases in the coordination number of B from [3] to [4], and of Al from [4] to [6]. Above 10 kbar, the boromuscovite stability field is limited along its high-temperature side by congruent (or incongruent?) melting of the mica, starting near 750 °C and 10 kbar and increasing to about 900 °C at 50 kbar, although, at such very high pressures a supercritical fluid may be present. Because, even in the presence of excess-boron fluid, the synthetic mica shows invariable X-ray properties, it is concluded that one B atom per formula unit represents the maximum, and - contrary to olenitic tourmalines - no further substitution of Si by B linked with addition of hydrogen takes place. In contrast to muscovite, KAl₂[AlSi₃O₁₀](OH)₂, end member boromuscovite is not stable under normal P-T conditions of the Continental Crust along a 30 °C/km geotherm, and especially not during the intrusion of acidic igneous rocks including their pegmatites, which may explain its scarcity in nature. However, it may form in the waning hydrothermal stages of deep-seated (>10.5 km) pegmatites and - providing sufficient boron is available - in HP/LT subduction zone environments, where it may carry boron to considerable depths.     

High-pressure synthesis and properties of magnesiocarpholite,MgAl2[Si2O6] (OH)4

Magnesiocarpholite has been synthesized on its own composition between 15 and 25 kb water pressure and 415°–600° C. Best conditions are 25 kb-550° C, starting from a mixture of oxides and synthetic cordierite. Within the MgO-Al₂O₃-SiO₂-H₂O system, possible substitutions appear to be very limited in magnesiocarpholite. Cell-parameters are a=13.706(3), b= 20.075(3), c=5.107(l) Å, space group Ccca. The larger cell, as compared with the most magnesian natural carpholites, is tentatively ascribed to structural disorder. Preliminary stability data confirm the low-temperature character of this mineral which is shown to be a high-pressure equivalent of sudoite+quartz.     

Electron delocalization and magnetic behavior in a single crystal of ilvaite,a mixed valence iron silicate

Ilvaite, Ca(Fe²⁺, Fe³⁺)Fe²⁺Si₂O₈(OH), a black mixed valence iron silicate shows considerable Fe²⁺?Fe³⁺ electron delocalization above 400 K, reminiscent of magnetite. A crystallographic phase transition from orthorhombic (Pnam) to monoclinic (P2 ₁/a) symmetry takes place on cooling at 343 K induced by electron ordering. In both phases, Fe²⁺ and Fe³⁺ occur in double octahedral chains parallel to the c axis. The thermal characteristics of the magnetic susceptibilities and their anisotropies in different crystallographic planes have been measured in the temperature range 400?21 K. Below 343±1K, a continuous rotation of the molar susceptibility K _∥ in the ab plane down to 90±2 K is observed, where the symmetry of the magnetic ellipsoid remains unchanged. X _a, X _b and X _c increase abruptly below 123±0.5 K, although antiferromagnetic ordering of Fe²⁺ and Fe³⁺ spins on A sites was suggested in previous Mössbauer and neutron powder diffraction studies. In addition, 1/X _a shows an antiferromagnetic maximum at 50±3 K, whereas 1/X _b and 1/X _c at first increase sharply below 123 K, followed by antiferromagnetic curvatures in the lowest temperature region. This behavior is consistent with the antiferromagnetic ordering of Fe²⁺ spins in the B sites. The observed magnetic phenomena suggest charge delocatization effects between adjacent Fe²⁺(A)-Fe³⁺(A) pairs not only along c, but also along a and b directions. The negative sign of the molar anisotropy (K _∥-K_⊥) suggests a singlet ground State ⁵A₁ for the Fe²⁺ ions, in agreement with previous Mössbauer studies.     

Carbon in silicate liquids: the systems NaAlSi3O8-CO2, CaAl2Si2O8-CO2, and KAlSi3O8-CO2

To further our knowledge of the effects of volatile components on phase relationships in aluminosilicate systems, we determined the vapor saturated solidi of albite, anorthite, and sanidine in the presence of CO₂ vapor. The depression of the temperature of the solidus of albite by CO₂ decreases from 30° C at 10 kbar, to 10° C at 20 kbar, to about 0 at 25 kbar, suggesting that the solubility of CO₂ in NaAlSi₃O₈ liquid in equilibrium with solid albite decreases with increasing pressure and temperature. In contrast, CO₂ lowers the temperature of the solidus of anorthite by 30° C at 14 kbar, and by 70dg C at 25 kbar. This contrasting behavior of albite and anorthite is also reflected in the behavior of melting in the absence of volatile components. Whereas albite melts congruently to a liquid of NaAl-Si₃O₈ composition to pressures of 35 kbar, anorthite melts congruently to only about 10 kbar and, at higher pressures, incongruently to corundum plus a liquid that is enriched in SiO₂ and CaO and depleted in Al₂O₃ relative to CaAl₂Si₂O₈.The tendency toward incongruent melting with increasing pressure in albite and anorthite produces an increase in the activity of SiO₂ component in the liquid ( ). We predict that this increases the ratio of molecular CO₂/CO ₃ ^2– in these liquids, but the experimental results from other workers are mutually contradictory. Because of the positive dP/dT of the albite solidus and the negative dP/dT of the anorthite solidus, we propose that a negative temperature derivative of the solubility of molecular CO₂ in plagioclase liquids may partly explain the decrease in solubility of carbon with increasing pressure in near-solidus NaAlSi₃O₈ liquids, which is in contrast to that in CaAl₂Si₂O₈ liquid. Also, reaction of CO₂ with NaAlSi₃O₈ liquid to form CO ₃ ^2– that is complexed with Na⁺ must be accompanied by a change in Al³⁺ from network-former to network-modifier, as Na⁺ is no longer abailable to charge-balance Al³⁺ in a network-forming role. However, when anorthite melts incongruently to corundum plus a CaO-rich liquid, the complexing of CO ₃ ^2– with the excess Ca²⁺ in the liquid does not require a change in the structural role of aluminum, and it may be more energetically favorable.The depression of the temperature of the solidus of sanidine resulting from the addition of CO₂ increases from 50° C at 5 kbar to 170° C at 15 kbar. In marked contrast to the plagioclase feldspars, sanidine melts incongruently to leucite plus a SiO₂-rich liquid up to the singular point at 15 kbar. Above this pressure, sanidine melts congruently, resulting in a decrease in the with increasing pressure in the interval up to 15 kbar. Above this pressure, the congruent melting of sanidine results in a lower and nearly constant relative to those of albite and anorthite, and CO₂ produces a nearly constant freezing-point depression of about 170° C. Because of the low at pressures above the singular point, we infer that most of the carbon dissolves as CO ₃ ^2– , resulting in a low CO₂/ CO ₃ ^2– , but a high total carbon content.The principles derived from the studies of phase equilibria in these chemically simple systems provide some information on the structural and thermal properties of magmas. We propose that the is an important parameter in controlling the speciation of carbon in these feldspathic liquids, but it certainly is not the only factor, and it may be relatively less significant in more complex compositions. In addition, our phase-equilibria approach does not provide direct thermal and structural information as do calorimetry and spectroscopy, but the latter have been used primarily on glasses (quenched liquids) and cannot be used in situ to derive direct information on liquids at elevated pressures, as can our method. Hopefully, the results of all of these approaches can be integrated to yield useful results.Institute of Geophysics and Planetary Physics, Contribution No. 2744     

The low-pressure stability of phase A,Mg7Si2O8(OH)6

 Phase A, Mg₇Si₂O₈(OH)₆, is a dense hydrous magnesium silicate whose importance as a host of H₂O in the Earth’s mantle is a subject of debate. We have investigated the low-pressure stability of phase A in experiments on the reaction phase A=brucite+forsterite. Experiments were conducted in piston-cylinder and multi-anvil apparatus, using mixtures of synthetic phase A, brucite and forsterite. The reaction was bracketed between 2.60 and 2.75 GPa at 500° C, between 3.25 and 3.48 GPa at 600° C and between 3.75 and 3.95 GPa at 650^° C. These pressures are much lower than observed in the synthesis experiments of Yamamoto and Akimoto (1977). At 750^° C the stability field of brucite + chondrodite was entered. The enthalpy of formation and entropy of phase A at 1 bar (10⁵ Pa), 298 K, were derived from the experimental brackets on the reaction phase A=brucite+forsterite using a modified version of the thermodynamic dataset THERMOCALC of Holland and Powell (1990), which includes a new equation of state of H₂O derived from the molecular dynamics simulations of Brodholt and Wood (1993). The data for phase A are: ΔH ^o _f =−7126±8 kJ mol^-1, S ^o=351 J K^-1 mol^-1. Incorporating these data into THERMOCALC allows the positions of other reactions involving phase A to be calculated, for example the reaction phase A + enstatite=forsterite+vapour, which limits the stability of phase A in equilibrium with enstatite. The calculated position of this reaction (753° C at 7 GPa to 937° C at 10 GPa) is in excellent agreement with the experimental brackets of Luth (1995) between 7 and 10 GPa, supporting the choice of equation of state of H₂O used in THERMOCALC. Comparison of our results with calculated P-T paths of subducting slabs (Peacock et al. 1994) suggests that, in the system MgO–SiO₂–H₂O, phase A could crystallise in compositions with Mg/Si>2 at pressures as low as 3 GPa. In less Mg rich compositions phase A could crystallise at pressures above approximately 6 GPa. Received: 3 July 1995/Accepted: 14 December 1995     

The P-T-fO 2 stability of deerite,Fe 12 2+ Fe 6 3+ [Si12O40](OH)10

New equilibrium experiments have been performed in the 20–27 kbar range to determine the upper thermal stability limit of endmember deerite, Fe ₁₂ ²⁺ Fe ₆ ³⁺ [Si₁₂O₄₀](OH)₁₀. In this pressure range, the maximum thermal stability limit is represented by the oxygen-conserving reaction: deerite(De)=9 ferrosilite(Fs)+3 magnetite(Mag)+3 quartz(Qtz)+5 H₂O(W) (1). Under the oxygen fugacities of the Ni-NiO buffer the breakdown-reduction reaction: De=12 Fs+2 Mag+5 W+1/2 O₂ (10) takes place at lower temperatures (e.g. T=63° at 27 kbar). The experimental brackets can be fitted using thermodynamic data for ferrosilite, magnetite and quartz from Berman (1988) and the following 1 bar, 298 K data for deerite (per gfw): V^o=55.74 J.bar^-1, S^o=1670 J.K^-1, H _f ^o =-18334 kJ, =2.5x10^-5K^-1, =-0.18x10^-5 bar^-1. Using these data in conjunction with literature data on coesite, grunerite, minnesotaite, and greenalite, the P-T stability field of endmember deerite has been calculated for P _s=P _{H 2}O. This field is limited by 6 univariant oxygenconserving dehydration curves, from which three have positive dP/dT slopes, the other three negative slopes. The lower pressure end of the stability field of endmember deerite is thus located at an invariant point at 250±70°C and 10+-1.5 kbar. Deerite rich in the endmember can thus appear only in environments with geothermal gradients lower than 10°C/km and at pressures higher than about 10 kbar, which is in agreement with 4 out of 5 independent P-T estimates for known occurrences. The presence of such deerite places good constraints on minimum pressure and maximum temperature conditions. From log f _{O 2}-T diagrams constructed with the same data base at different pressures, it appears that endmember deerite is, at temperatures near those of its upper stability limit, stable only over a narrow range of oxygen fugacities within the magnetite field. With decreasing temperatures, deerite becomes stable towards slightly higher oxygen fugacities but reaches the hematite field only at temperatures more than 200°C lower than the upper stability limit. This practically precludes the coexistence deerite-hematite with near-endmember deerite in natural environments.     

我国发现的一种含锂新矿物——纤钡锂石 BaMg2LiAl3[Si2O6]2（OH）8

纤钡锂石产于湖南临武香花岭地区一水晶矿锂云母石英脉晶洞中,与锂云母、石英等矿物共生。矿物为浅黄白色,丝绢光泽,呈针状、纤维状、放射状或平行束状集合体,纤维长达1厘米。经X射线单晶及粉晶衍射测定:该矿物属斜方晶系,空间群Ccca,晶胞参数:a=13.60(?),b=20.24(?),e=5.16(?)。最强衍射线为:10.12(?)(100) 4.05(?)(78) 3.39(?)(91) 2.605(?)(31)2.390(?)(28)。     

Hydrogen bonding interactions in phase A [Mg7Si2O8(OH)6] at ambient and high pressure

Neutron powder diffraction data of phase A (Mg₇Si₂O₈(OH)₆) were collected at ambient pressure and 3.2?GPa (calculated from the compressibility of phase A) from the deuterated compound, and the structure was refined using the Rietveld method. The derived crystal structure implies that hydrogen atoms occupy two distinct sites in phase A, both forming hydrogen bonds of different lengths with the same oxygen atom. This picture is supported by IR spectra, which exhibit two absorption bands at 3400 and 3513?cm^?1 corresponding to OH stretching vibrations, and proton NMR spectra, which display two peaks with equal intensities and isotropic chemical shifts of 3.7 and 5?ppm. The D-D distance [D(1)-D(2) distance] at ambient pressure was found to be 2.09?±?0.02?Å from the neutron diffraction data and 2.09?±?0.05?Å from the NMR spectra. At 3.2?GPa, there is no statistically significant increase in the O-D interatomic distance while the hydrogen bonding interaction D···O appears to increase for one of the hydrogen sites, D(1), which has the stronger hydrogen bonding interaction compared with the other hydrogen, D(2), at ambient pressure. The O-D bond valences, determined indirectly from the D···O distances were 0.86 and 0.91 at ambient pressure, and 0.83 and 0.90?at 3.2?GPa, for D(1) and D(2), respectively.     

Synthesis and stability of deerite,Fe 12 2+ Fe 6 3+ [Si12O40](OH)10, and Fe3+⇋Al3+ substitutions at 15–28 kb

Deerite, Fe ₁₂ ²⁺ Fe ₆ ³⁺ [Si₁₂O₄₀](OH)₁₀, thus far known from ten localities in glaucophane schist terranes, was synthesized at water pressures of 20–25 kb and temperatures of 550–600 °C under the of the Ni/NiO buffer. The X-ray powder diagram, lattice constants and infrared spectrum of the synthetic phase are closely similar to those of the natural mineral. A solid solution series extends from this ferri-deerite end member to some 20 mole % of a hypothetical alumino-deerite, Fe ₁₂ ²⁺ Al ₆ ³⁺ [Si₁₂O₄₀](OH)₁₀. The upper temperature breakdown of ferri-deerite to the assemblage ferrosilite +magnetite+quartz+water occurs at about 490 °C at 15 kb, and 610 °C at 25 kb fluid pressure for the of the Ni/NiO buffer. Extrapolation of these data to lower water pressures indicates that deerite can be a stable mineral only in very low-temperature, high-pressure environments.     

Synthesis and Stability Relations of Epidote, Ca2Al2FeSi3O12 (OH)

Hydrothermal investigation of the bulk composition 2CaO·Al₂O₃·l/2Fe₂O₂·3SiO₂+excessH₂O (Ps 33 +excess H₂O) has been conducted using conventionalapparatus and solid oxygen buffer techniques. Coarse-grainedepidotes (over 150 microns in some cases) were readily synthesizedfrom oxide mixtures with a 98 per cent yield as well as fromtheir high temperature equivalents at 600–700 °C and5 kb P_fluid and over a range of oxygen fugacities. Electronmicroprobe analyses show that maximum Fe⁺³ content of syntheticepidotes varies as a function of fo₂. Epidote is most iron-rich(Ps 33 ± 2) at high (HM and CCO) oxygen buffers and becomesprogressively more aluminous (Ps 25 ± 3) with decreasingfo₂ values and temperatures. Such variation is consistent withthe change of refractive indices and cell dimensions. The meanrefractive indices and cell dimensions for synthetic epidote(Ps 33) are N = 1.745 ± 0.005, N = l.786±0.005,a = 8.920±0.005 Å, b = 5.645±0.004 Å,c = 10.190 ű0.006 Å, and ß = 115°31'±4' and for epidote (Ps 25) are N = 1.735±0.005,N = 1.775±0.005, a = 8.891±0.005 Å, b =5.625±0.004 Å, c = 10.177±0.006 Å,and ß = 115° 30'±3'. Mössbauer spectraindicate synthetic epidotes are relatively disordered. Garnets of intermediate composition in the grossular-andraditeseries were synthesized and the cell dimensions and refractiveindices vary linearly with composition. With successive decreasein fo₂, garnet synthesized on the Ps 33 bulk composition movestoward the grossular end member with simultaneously increasingalmandine component; concomitantly the hercynite component ofthe coexistent magnetite increases. The fo₂-T-P_fluid relations were determined by employing mineralmixtures of synthetic epidote and its high temperature equivalentin subequal proportions. Equilibrium was demonstrated for thereactions (1) epidote (Ps 33) = anorthite+grandite+FeO_x+quartz+ fluid, and (2) epidote (Ps 25) (+quartz) = garnet₃₈+anorthite+magnetitc+fluid.With fo₂ defined by the HM buffer, epidote (Ps 33) is stableup to 748 °C, 5 kb, 678 °C, 3 kb, and 635 °C, 2kb P_fluid. With fo₂ defined by the NNO buffer, the epidote (Ps25) high temperature stability limit is reduced about 100 °Cat 5kb P_fluid. At slightly lower fo₂, than defined by the QFMbuffer, epidote is not stable at any temperatures; the assemblagehedenbergite+anorthite+garnet₃₈+fluid replaces epidote in thepresence of excess quartz. Combined with previously determined equilibria for prehnite,andradite, and hedenbergite, isobaric fo,-T relations were furtherinvestigated by chemographic analysis interrelating the phasesprehnite, epidote, grandite, hedenbergite, wollastonite, anorthite,and magnetite in the system CaO-Fe₂O₃-Al₂O₃-SiO₂-H₂0. Such analysisallowed the construction of a semi-quantitative petrogeneticgrid applicable to natural parageneses in low µCO₂ environments,and the delineation of the low temperature stability limit ofepidote as a function of fo₂. Enlargement of the epidote stabilityrange toward both high and low temperatures with increasingfo₂, is consistent with widespread occurrences of epidote inlow- and mediumgrade metamorphic rocks.