Soluble ferric iron as an effective protective agent against UV radiation: Implications for early life

Some recent MER Rover Opportunity results on ancient sedimentary rocks from Mars describe sandstones originated from the chemical weathering of olivine basalts by acidic waters [Squyres, S.W., Knoll, A.H., 2005. Earth Planet. Sci. Lett. 240, 1-10]. The absence of protective components in early Mars atmosphere forced any possible primordial life forms to deal with high doses of UV radiation. A similar situation occurred on the primitive Earth during the development of early life in the Archean [Berkner, L.V., Marshall, L.C., 1965. J. Atmos. Sci. 22 (3), 225-261; Kasting, J.F., 1993. Science 259, 920-926]. It is known that some cellular and/or external components can shield organisms from damaging UV radiation or quench its toxic effects [Olson, J.M., Pierson, B.K., 1986. Photosynth. Res. 9, 251-259; García-Pichel, F., 1998. Origins Life Evol. B 28, 321-347; Cockell, C., Rettberg, P., Horneck, G., Scherer, K., Stokes, M.D., 2003. Polar Biol. 26, 62-69]. The effectiveness of iron minerals for UV protection has also been reported [Phoenix, V.R., Konhauser, K.O., Adams, D.G., Bottrell, S.H., 2001. Geology 29 (9), 823-826], but nothing is known about the effect of iron in solution. Here we demonstrate the protective effect of soluble ferric iron against UV radiation on acidophilic photosynthetic microorganisms. These results offer an interesting alternative means of protection for life on the surface of early Mars and Earth, especially in light of the geochemical conditions in which the sedimentary minerals, jarosite and goethite, recently reported by the MER missions, were formed [Squyres, S.W., Arvidson, R.E., Bell III, J.F., Brückner, J., Cabrol, N.A., Calvin, W., Carr, M.H., Christensen, P.R., Clark, B.C., Crumpler, L., Des Marais, D.J., d'Uston, C., Economou, T., Farmer, J., Farrand, W., Folkner, W., Golombek, M., Gorevan, S., Grant, J.A., Greeley, R., Grotzinger, J., Haskin, L., Herkenhoff, K.E., Hviid, S., Johnson, J., Klingelhöfer, G., Knoll, A.H., Landis, G., Lemmon, M., Li, R., Madsen, M.B., Malin, M.C., McLennan, S.M., McSween, H.Y., Ming, D.W., Moersch, J., Morris, R.V., Parker, T., Rice Jr., J.W., Richter, L., Rieder, R., Sims, M., Smith, M., Smith, P., Soderblom, L.A., Sullivan, R., Wänke, H., Wdowiak, T., Wolff, M., Yen, A., 2004. Science 306, 1698-1703; Klingelhöfer, G., Morris, R.V., Bernhardt, B., Schröder, C., Rodionov, D.S., de Souza Jr., P.A., Yen, A., Gellert, R., Evlanov, E.N., Zubkov, B., Foh, J., Bonnes, U., Kankeleit, E., Gütlich, P., Ming, D.W., Renz, F., Wdowiak, T., Squyres, S.W., Arvidson, R.E., 2004. Science 306, 1740-1745].     

Fossilization potential of iron-bearing minerals in acidic environments of Rio Tinto, Spain: Implications for Mars exploration

Acidic waters of the Rio Tinto, southwestern Spain, evaporate seasonally, precipitating a variety of iron sulfide and oxide minerals. Schwertmannite and nanophase goethite form thin laminae on biological and detrital grain surfaces, replicating, among other things, the morphologies of insect cuticle, plant tissues, fungi, algae, and bacteria. Intergrain cements also incorporate bacterial cells and filaments. Other sulfate minerals precipitated in Rio Tinto environments are transient and contribute little to short-term preservation. Because the Rio Tinto has been cutting its current valley for several million years, terrace deposits provide a window on longer term fossil preservation. Early and later diagenesis are recorded in terrace deposits formed about one thousand and two million years ago, respectively. The sedimentary structures and mineralogies of these deposits suggest that they formed under physical and chemical conditions comparable to those of modern Rio Tinto sediments. The terrace deposits show quantitative loss of sulfate minerals, increasing crystallinity of goethite and, in the older terrace, replacement of goethite by hematite. Fossils formed originally by schwertmannite and nanophase goethite replication persist through diagenesis, preserving a long term record of local biological diversity. Fossil preservation by iron oxides in the acidic environment of Rio Tinto suggests that if life was present when sedimentary rocks formed at Meridiani Planum, Mars, precipitated minerals could record their presence.     

Multiple techniques for mineral identification on Mars:: a study of hydrothermal rocks as potential analogues for astrobiology sites on Mars

Spectroscopic studies of Mars analog materials combining multiple spectral ranges and techniques are necessary in order to obtain ground truth information for interpretation of rocks and soils on Mars. Two hydrothermal rocks from Yellowstone National Park, Wyoming, were characterized here because they contain minerals requiring water for formation and they provide a possible niche for some of the earliest organisms on Earth. If related rocks formed in hydrothermal sites on Mars, identification of these would be important for understanding the geology of the planet and potential habitability for life. XRD, thermal properties, VNIR, mid-IR, and Raman spectroscopy were employed to identify the mineralogy of the samples in this study. The rocks studied here include a travertine from Mammoth Formation that contains primarily calcite with some aragonite and gypsum and a siliceous sinter from Octopus Spring that contains a variety of poorly crystalline to amorphous silicate minerals. Calcite was detected readily in the travertine rock using any one of the techniques studied. The small amount of gypsum was uniquely identified using XRD, VNIR, and mid-IR, while the aragonite was uniquely identified using XRD and Raman. The siliceous sinter sample was more difficult to characterize using each of these techniques and a combination of all techniques was more useful than any single technique. Although XRD is the historical standard for mineral identification, it presents some challenges for remote investigations. Thermal properties are most useful for minerals with discrete thermal transitions. Raman spectroscopy is most effective for detecting polarized species such as CO₃, OH, and CH, and exhibits sharp bands for most highly crystalline minerals when abundant. Mid-IR spectroscopy is most useful in characterizing Si-O (and metal-O) bonds and also has the advantage that remote information about sample texture (e.g., particle size) can be determined. Mid-IR spectroscopy is also sensitive to structural OH, CO₃, and SO₄ bonds when abundant. VNIR spectroscopy is best for characterizing metal excitational bands and water, and is also a good technique for identification of structural OH, CO₃, SO₄, or CH bonds. Combining multiple techniques provides the most comprehensive information about mineralogy because of the different selection rules and particle size sensitivities, in addition to maximum coverage of excitational and vibrational bands at all wavelengths. This study of hydrothermal rocks from Yellowstone provides insights on how to combine information from multiple instruments to identify mineralogy and hence evidence of water on Mars.     

Lidar and the mobile Scene Modeler (mSM) as scientific tools for planetary exploration

With the continued success of the Mars Exploration Rovers and the return of humans to the Moon within the next decade, a considerable amount of research is being done on the technologies required to provide surface mobility and the tools required to provide scientific capability. Here, we explore the utility of lidar and the mobile Scene Modeler (mSM) - which is based on a stereo camera system - as scientific tools. Both of these technologies have been, or are being considered for, technological applications such as autonomous satellite rendezvous and rover navigation. We carried out a series of field tests at the 23 km diameter, 39 Ma, Haughton impact structure located on Devon Island in the Canadian Arctic. Several sites of geological interest were investigated, including polygonal terrain, gullies and channels, slump/collapse features, impact melt breccia hills, and a site of impact-associated hydrothermal mineralization. These field tests show that lidar and mSM provide a superior visual record of the terrain, from the regional (km) to outcrop (m to cm) scale and in 3-D, as compared to standard digital photography. Thus, a key strength of these technologies is in situ reconnaissance and documentation. Lidar scans also provide a wealth of geometric and structural information about a site, accomplishing the equivalent of weeks to months of manual surveying and with much greater accuracy than traditional tools, making this extremely useful for planetary exploration missions. An unexpected result of these field tests is the potential for lidar and mSM to provide qualitative, and potentially quantitative, composition information about a site. Given the high probability of lidar and mSM being used on future lunar missions, we suggest that it would be beneficial to further investigate the potential for these technologies to be used as science tools.     

Free-floating planets as potential seats for aqueous and non-aqueous life

Bodies with water, ammonia or ethane oceans are possible in interstellar space. This may happen for optically thick atmospheres of methane, ethane and carbon dioxide.     

Antarctic Dry Valleys and indigenous weathering in Mars meteorites: Implications for water and life on Mars

The Dry Valleys of Antarctica are an excellent analog of the environment at the surface of Mars. Soil formation histories involving slow processes of sublimation and migration of water-soluble ions in polar desert environments are characteristic of both Mars and the Dry Valleys. At the present time, the environment in the Dry Valleys is probably the most similar to that in the mid-latitudes on Mars although similar conditions may be found in areas of the polar regions during their respective Mars summers. It is thought that Mars is currently in an interglacial period, and that subsurface water ice is sublimating poleward. Because the Mars sublimation zones seem to be the most similar to the Antarctic Dry Valleys, the Dry Valleys-type Mars climate is migrating towards the poles. Mars has likely undergone drastic obliquity changes, which means that the Dry Valleys analog to Mars may be valid for large parts of Mars, including the polar regions, at different times in geologic history. Dry Valleys soils contain traces of silicate alteration products and secondary salts much like those found in Mars meteorites. A martian origin for some of the meteorite secondary phases has been verified previously; it can be based on the presence of shock effects and other features which could not have formed after the rocks were ejected from Mars, or demonstrable modification of a feature by the passage of the meteorite through Earth's atmosphere (proving the feature to be pre-terrestrial). The martian weathering products provide critical information for deciphering the near-surface history of Mars. Definite martian secondary phases include Ca-carbonate, Ca-sulfate, and Mg-sulfate. These salts are also found in soils from the Dry Valleys of Antarctica. Results of earlier Wright Valley work are consistent with what is now known about Mars based on meteorite and orbital data. Results from recent and current Mars missions support this inference. Aqueous processes are active even in permanently frozen Antarctic Dry Valleys soils, and similar processes are probably also occurring on Mars today, especially at the mid-latitudes. Both weathering products and life in Dry Valleys soils are distributed heterogeneously. Such variations should be taken into account in future studies of martian soils and also in the search for possible life on Mars.     

The science behind the vision for U.S. space exploration: the value of a human–robotic partnership

The Vision for U.S. Space Exploration offers new opportunities for aggressively increasing the pace of scientific discoveries across the Solar System by empowering an on-site partnership between humans and robotics, enhanced by new technology-enabled capabilities. In particular, the early emphasis of this new Vision will be on development of new scientific activities on the Moon, and later on Mars. Integration of in situ traditional science activities with creative new types of applied scientific research on the Moon and Mars is a key ingredient in the US Vision. The Apollo era record of achievement involving human exploration is particularly informative, as it demonstrates the accelerated pace of scientific discovery and understanding that resulted from human “on site” activities, however briefly, on planetary surfaces. An example of how integrated human and robotic exploration can enable breakthrough science on the planet Mars is provided in order to illustrate these points. The scientific opportunities associated with the Vision for US Space Exploration are many, and with the incorporation of human-based capabilities on the Moon and Mars, an accelerated pace of discovery and understanding will be possible.     

The Manicouagan impact structure as a terrestrial analogue site for lunar and martian planetary science

The 90 km diameter, late Triassic Manicouagan impact structure of Québec, Canada, is a well-preserved, undeformed complex crater possessing an anorthositic central uplift and a 55 km diameter melt sheet. As such, it provides a valuable terrestrial analogue for impact structures developed on other planetary bodies, especially the Moon and Mars, which are currently the focus of exploration initiatives. The scientific value of Manicouagan has recently been enhanced due to the production, between 1994 and 2006, of ∼18 km of drill core from 38 holes by the mineral exploration industry. Three of these holes are in excess of 1.5 km deep, with the deepest reaching 1.8 km. Here we combine recent field work, sampling and the drill core data with previous knowledge to provide insight into processes occurring at Manicouagan and, by inference, within extraterrestrial impact structures. Four areas of comparative planetology are discussed: impact melt sheets, central uplifts, impact-generated hydrothermal regimes and footwall breccias. Human training and instrument testing opportunities are also considered. The drill core reveals that the impact melt and clast-bearing impact melts in the centre of the structure reach thicknesses of 1.4 km. The 1.1 km thick impact melt has undergone differentiation to yield a lower monzodiorite, a transitional quartz monzodiorite and an upper quartz monzonite sequence. This calls into question the previous citing of Manicouagan as an exemplar of a relatively large crater possessing an undifferentiated melt sheet, which was used as a rationale for assigning different composition lunar impact melts and clast-bearing impact melts to separate cratering events. The predominantly anorthositic central uplift at Manicouagan is comparable to certain lunar highlands material, with morphometric analogies to the King, Tycho, Pythagoras, Jackson, and Copernicus impact structures, which have similar diameters and uplift structure. Excellent exposure of the Manicouagan uplift facilitates mapping and an appraisal of its formation and collapse mechanisms, enhanced by drill core data from the centre of the structure. Recent field studies at the edge of the central island at Manicouagan, and multiple drill core sections through footwall lithologies, provide insight into allochthonous (clastic and suevitic) and autochthonous breccia formation, as well as shock effects. The hydrothermal regimes developed at Manicouagan are akin to systems proposed for Noachian (>3.5 Ga) Mars that involve alteration of impact melts via meteoritic and surface waters, with the generation of phyllosilicates, zeolites, hematite, sulfates and sulfides that can contribute to martian soil formation and sedimentation processes.     

Ancient heat flow and crustal thickness at Warrego rise, Thaumasia highlands, Mars: Implications for a stratified crust

Heat flow calculations based on geological and/or geophysical indicators can help to constrain the thickness, and potentially the geochemical stratification, of the martian crust. Here we analyze the Warrego rise region, part of the ancient mountain range referred to as the Thaumasia highlands. This region has a crustal thickness much greater than the martian average, as well as estimations of the depth to the brittle-ductile transition beneath two scarps interpreted to be thrust faults. For the local crustal density (2900 kg m⁻³) favored by our analysis of the flexural state of compensation of the local topography, the crustal thickness is at least 70 and 75 km at the scarp locations. However, for one of the scarp locations our nominal model does not obtain heat flow solutions permitting a homogeneous crust as thick as required. Our results, therefore, suggest that the crust beneath the Warrego rise region is chemically stratified with a heat-producing enriched upper layer thinner than the whole crust. Moreover, if the mantle heat flow (at the time of scarp formation) was higher than 0.3 of the surface heat low, as predicted by thermal history models, then a stratified crust rise seems unavoidable for this region, even if local heat-producing element abundances lower than average or hydrostatic pore pressure are considered. This finding is consistent with a complex geological history, which includes magmatic-driven activity.     

Thermal alteration of nontronite and montmorillonite: Implications for the martian surface

To test the effects of meteorite impacts on martian phyllosilicate deposits, we heated two smectites (nontronite and montmorillonite) to temperatures ranging from 350 °C to 1150 °C for durations of 4-24 h in two different atmospheres, under air and a steady flow of CO₂. Samples were analyzed using X-ray diffraction (XRD) and near-infrared (NIR) and mid-infrared (MIR) reflectance spectroscopy. Interlayer water was lost after heating to temperatures of ∼400 °C. Between 400 °C and 700 °C, nontronite converted to an intermediary phase which conserved the XRD pattern of untreated nontronite with the exception of the 0 0 1 peak. Nanocrystalline high-temperature phases formed for both smectites at temperatures between 700 °C and 1000 °C. Finally, after being heated to temperatures above ∼1100 °C, the samples melted and recrystallized into secondary phases. Secondary high-temperature phases included sillimanite and cristobalite for both smectites plus hematite for nontronite. NIR and MIR reflectance spectra significantly evolved with increasing temperature. NIR spectra of smectites showed that 1.4 and 1.9 μm bands decrease in intensity and disappear above 700 °C. Similarly, the 2.2-2.3 μm metal-OH band showed a decrease in intensity as well as an overall shift towards lower wavelengths (for nontronite) due to the thermal resistance of the Al-OH bond compared to the Fe-OH bond. NIR spectra of montmorillonite showed a gradual increase in band depth up to temperatures between 500 °C and 600 °C, then decreased with increasing temperature. In the MIR spectra of samples heated to temperatures above ∼1100 °C, newly formed bands confirmed the secondary phases identified by XRD. Similarities between the NIR spectra of our heated samples and the phyllosilicates in some martian craters imply that these phyllosilicates were altered by the impact-generated heat and thus were not formed post-impact. In addition, NIR reflectance spectra provide a proxy for shock temperatures of smectites up to 700 °C while MIR is optimum for identification of high-temperature phases of smectites above 700 °C.     

The nitrogen cycle on Mars: Impact decomposition of near-surface nitrates as a source for a nitrogen steady state

Nitrogen isotopes appear to be escaping from Mars at approximately the primordial ratio ¹⁴N/¹⁵N ≈ 275 and to have an atmospheric nitrogen depletion time scale of about 800 Myr. For the standard model of a progressive decline of an initial inventory of atmospheric nitrogen, having no source of N, the agreement of the isotopic ratio of escaping N with primitive nitrogen would be coincidental. Here we propose a steady state model in which nitrates, produced early in Mars' history, are later decomposed by the current impact flux. The detection of near-surface nitrates can discriminate between the standard and the steady state models. Based on current estimates of N loss to space, we predict a quantity of nitrates equivalent to 60 ± 30 mbars for a steady state, or a global layer of about 3 m of pure NaNO₃.     

Morphology, stratigraphy, and mineralogical composition of a layered formation covering the plateaus around Valles Marineris, Mars: Implications for its geological history

An extensive layered formation covers the high plateaus around Valles Marineris. Mapping based on HiRISE, CTX and HRSC images reveals these layered deposits (LDs) crop out north of Tithonium Chasma, south of Ius Chasma, around West Candor Chasma, and southwest of Juventae Chasma and Ganges Chasma. The estimated area covered by LDs is ∼42,300 km². They consist of a series of alternating light and dark beds, a 100 m in total thickness that is covered by a dark unconsolidated mantle possibly resulting from their erosion. Their stratigraphic relationships with the plateaus and the Valles Marineris chasmata indicate that the LDs were deposited during the Early- to Late Hesperian, and possibly later depending on the region, before the end of the backwasting of the walls near Juventae Chasma, and probably before Louros Valles sapping near Ius Chasma. Their large spatial coverage and their location mainly on highly elevated plateaus lead us to conclude that LDs correspond to airfall dust and/or volcanic ash. The surface of LDs is characterized by various morphological features, including lobate ejecta and pedestal craters, polygonal fractures, valleys and sinuous ridges, and a pitted surface, which are all consistent with liquid water and/or water ice filling the pores of LDs. LDs were episodically eroded by fluvial processes and were possibly modified by sublimation processes. Considering that LDs correspond to dust and/or ash possibly mixed with ice particles in the past, LDs may be compared to Dissected Mantle Terrains currently observed in mid- to high latitudes on Mars, which correspond to a mantle of mixed dust and ice that is partially or totally dissected by sublimation. The analysis of CRISM and OMEGA hyperspectral data indicates that the basal layer of LDs near Ganges Chasma exhibits spectra with absorption bands at ∼1.4 μm, and ∼1.9 μm and a large deep band between ∼2.21 and ∼2.26 μm that are consistent with previous spectral analysis in other regions of LDs. We interpret these spectral characteristics as an enrichment of LDs in opaline silica or by Al-phyllosilicate-rich layers being overlain by hydroxylated ferric sulfate-rich layers. These alteration minerals are consistent with the aqueous alteration of LDs at low temperatures.     

Mars low-latitude neutron distribution: Possible remnant near-surface water ice and a mechanism for its recent emplacement

The Mars Odyssey Gamma-Ray Spectrometer/Neutron Spectrometer/High Energy Neutron Detector has provided measurements of near-surface hydrogen, generally interpreted as resulting from water, in the equatorial and mid-latitudes. Water abundances as great as 10% by mass are inferred. Although such high abundances could be present as adsorbed water in clays or water of hydration of magnesium salts, other measurements suggest that this is not likely. The spatial pattern of where the water is located is not consistent with a dependence on composition, topography, present-day atmospheric water abundance, latitude, or thermophysical properties. The zonal distribution of water shows two maxima and two minima, which is very reminiscent of a distribution that is related to an atmospheric phenomenon. We suggest that the high water abundances could be due to transient ground ice that is present in the top meter of the surface. Ice would be stable at tens-of-centimeters depth at these latitudes if the atmospheric water abundance were more than about several times the present value, much as ice is stable poleward of about ±60° latitude for current water abundances. Higher atmospheric water abundances could have resulted relatively recently, even with the present orbital elements, if the south-polar cap had lost its annual covering of CO₂ ice; this would have exposed an underlying water-ice cap that could supply water to the atmosphere during southern summer. If this hypothesis is correct, then (i) the low-latitude water ice is unstable today and is in the process of sublimating and diffusing back into the atmosphere, and (ii) the current configuration of perennial CO₂ ice being present on the south cap but not on the north cap might not be representative of the present epoch over the last, say, ten thousand years.     

Spectral characterization of weathering products of elemental iron in a Martian atmosphere: Implications for Mars hyperspectral studies

Visible and near-infrared spectroscopic properties have been measured on elemental iron experimentally weathered in simulated Martian atmosphere and correlated to mineralogical compositions determined by X-ray diffraction. Two main features are observed in the reflectance spectra, corresponding to two deep bands located at 0.9 and 3.1 μm, respectively the iron band and the hydration band. In early weathering stages both Fe²⁺ and Fe³⁺ bands are identified. In addition, whereas the water band position does not change with time, the Fe²⁺ band disappears, and the Fe³⁺ band shifts towards longer wavelength (from 0.88 to 0.92 μm) because of transition from Fe²⁺ phases (siderite) to Fe³⁺ phases (ferrihydrite and goethite). Apart from these spectral signatures, other bands more specific of each phase are not clearly evidenced, especially for siderite. This is due to relatively low abundance of siderite (<20 wt%), but also to the very small grain size of secondary phase as well as surface coatings of iron (oxy)hydroxides. Therefore, our results suggest that carbonates, even if not detected, could be present in the form of very small grains in the surface of Mars.     

Volcaniclastic habitats for early life on Earth and Mars: A case study from ∼3.5 Ga-old rocks from the Pilbara, Australia

Within the context of present and future in situ missions to Mars to investigate its habitability and to search for traces of life, we studied the habitability and traces of past life in ∼3.5 Ga-old volcanic sands deposited in littoral environments an analogue to Noachian environments on Mars. The environmental conditions on Noachian Mars (4.1-3.7 Ga) and the Early Archaean (4.0-3.3 Ga) Earth were, in many respects, similar: presence of liquid water, dense CO₂ atmosphere, availability of carbon and bio-essential elements, and availability of energy. For this reason, information contained in Early Archaean terrestrial rocks concerning habitable conditions (on a microbial scale) and traces of past life are of relevance in defining strategies to be used to identify past habitats and past life on Mars.One such example is the 3.446 Ga-old Kitty’s Gap Chert in the Pilbara Craton, NW. Australia. This formation consists of volcanic sediments deposited in a coastal mudflat environment and is thus a relevant analogue for sediments deposited in shallow water environments on Noachian Mars. Two main types of habitat are represented, a volcanic (lithic) habitat and planar stabilized sediment surfaces in sunlit shallow waters. The sediments hosted small (<1 μm in size) microorganisms that formed colonies on volcanic particle surfaces and in pore waters within the volcanic sediments, as well as biofilms on stabilised sediment surfaces. The microorganisms included coccoids, filaments and rare rod-shaped organisms associated with microbial polymer (EPS). The preserved microbial community was apparently dominated by chemotrophic organisms but some locally transported filaments and filamentous mat fragments indicate that possibly photosynthetic mats formed nearby. Both microorganisms and sediments were silicified during very early diagenesis.There are no macroscopic traces of fossilised life in these volcanic sediments and sophisticated instrumentation and specialized sample preparation techniques are required to establish the biogenicity and syngenicity of the traces of past life. The fact that the traces of life are cryptic, and the necessity of using sophisticated instrumentation, reinforces the challenges and difficulties of in situ robotic missions to identify past life on Mars. We therefore recommend the return of samples from Mars to Earth for a definitive search for traces of life.     

Aluminum‐26 in H4 chondrites: Implications for its production and its usefulness as a fine‐scale chronometer for early solar system events

Abstract— In order to investigate whether or not ²⁶Al can be used as a fine‐scale chronometer for early solar system events we measured, with an ion microprobe, Mg isotopes and Al/Mg ratios in separated plagioclase, olivine, and pyroxene crystals from the H4 chondrites Ste Marguerite (SM), Forest Vale (FV), Beaver Creek and Quenggouk and compared the results with the canonical ²⁶Al/²⁷Al ratio for calcium‐aluminum‐rich inclusions (CAIs). For SM and FV, Pb/Pb and Mn‐Cr ages have previously been determined (Göpel et al., 1994; Polnau et al., 2000; Polnau and Lugmair, 2001). Plagioclase grains from these two meteorites show clear excesses of ²⁶Mg. The ²⁶Al/²⁷Al ratios inferred from these excesses and from isotopically normal Mg in pyroxene and olivine are (2.87 ± 0.64) × 10^?7 for SM and (1.52 ± 0.52) × 10^?7 for FV. The differences between these ratios and the ratio of 5 times 10^?5 in CAIs indicate time differences of 5.4 ± 0.1 Ma and 6.1 ± 0.2 Ma for SM and FV, respectively. These differences are in agreement with the absolute Pb/Pb ages for CAIs and SM and FV phosphates but there are large discrepancies between the U‐Pb and Mn‐Cr system for the relative ages for CAIs, SM and FV. For example, Mn‐Cr ages of carbonates from Kaidun are older than the Pb/Pb age of CAIs. However, even if we require that CAIs are older than these carbonates, the time difference between this “adjusted” CAI age and the Mn‐Cr ages of SM and FV require that ²⁶ Al was widely distributed in the early solar system at the time of CAI formation and was not mostly present in CAIs, a feature of the X‐wind model proposed by Shu and collaborators (Gounelle et al., 2001; Shu et al., 2001). From this we conclude that there was enough ²⁶Al to melt small planetary bodies as long as they formed within 2 Ma of CAIs, and that ²⁶Al can serve as a fine‐scale chronometer for early solar system events.