Initiation of large-volume silicic centers in the Yellowstone hotspot track: insights from H<Subscript>2</Subscript>O- and F-rich quartz-hosted rhyolitic melt inclusions in the Arbon Valley Tuff of the Snake River Plain

During the onset of caldera cluster volcanism at a new location in the Snake River Plain (SRP), there is an increase in basalt fluxing into the crust and diverse silicic volcanic products are generated. The SRP contains abundant and compositionally diverse hot, dry, and often low-δ¹⁸O silicic volcanic rocks produced through time during the formation of individual caldera clusters, but more H₂O-rich eruptive products are rare. We report analyses of quartz-hosted melt inclusions from pumice clasts from the upper and lower Arbon Valley Tuff (AVT) to gain insight into the initiation of caldera cluster volcanism. The AVT, a voluminous, caldera-forming rhyolite, represents the commencement of volcanism (10.44 Ma) at the Picabo volcanic field of the Yellowstone hotspot track. This is a normal δ¹⁸O rhyolite consisting of early and late erupted members (lower and upper AVT, respectively) with extremely radiogenic Sr isotopes and unradiogenic Nd isotopes, requiring that ~50 % of the mass of these elements is derived from melts of Archean upper crust. Our data reveal distinctive features of the early erupted lower AVT melt including: variable F concentrations up to 1.4 wt%, homogenous and low Cl concentrations (~0.08 wt%), H₂O contents ranging from 2.3 to 6.4 wt%, CO₂ contents ranging from 79 to 410 ppm, and enrichment of incompatible elements compared to the late erupted AVT, subsequent Picabo rhyolites, SRP rhyolites, and melt inclusions from other metaluminous rhyolites (e.g., Bishop Tuff, Mesa Falls Tuff). We couple melt inclusion data with Ti measurements and cathodoluminescence (CL) imaging of the host quartz phenocrysts to elucidate the petrogenetic evolution of the AVT rhyolitic magma. We observe complex and multistage CL zoning patterns, the most critical being multiple truncations indicative of several dissolution–reprecipitation episodes with bright CL cores (higher Ti) and occasional bright CL rims (higher Ti). We interpret the high H₂O, F, F/Cl, and incompatible trace element concentrations in the context of a model involving melting of Archean crust and mixing of the crustal melt with basaltic differentiates, followed by multiple stages of fractional crystallization, remelting, and melt extraction. This multistage process, which we refer to as distillation, is further supported by the complex CL zoning patterns in quartz. We interpret new Δ¹⁸O(Qz-Mt) isotope measurements, demonstrating a 0.4 ‰ or ~180 °C temperature difference, and strong Sr isotopic and chemical differences between the upper and lower AVT to represent two separate eruptions. Similarities between the AVT and the first caldera-forming eruptions of other caldera clusters in the SRP (Yellowstone, Heise and Bruneau Jarbidge) suggest that the more evolved, lower-temperature, more H₂O-rich rhyolites of the SRP are important in the initiation of a caldera cluster during the onset of plume impingement.     

Local and regional variation of MORB parent magmas: evidence from melt inclusions from the Endeavour Segment of the Juan de Fuca Ridge

The development of petrogenetic models of igneous processes in the mantle is dependent on a detailed knowledge of the diversity of magmas produced in the melting regime. These primary magmas, however, undergo significant mixing and fractionation during transport to the surface, destroying much of the evidence of their primary diversity. To circumvent this problem and to determine the diversity of melts produced in the mantle, we used melt inclusions hosted in primitive plagioclase phenocrysts from eight mid-ocean ridge basalts from the axial and West Valleys of the Endeavour Segment, Juan de Fuca Ridge. This area was selected for study because of the demonstrated close association of enriched (E-MORB) lavas and incompatible element enriched depleted (N-MORB) lavas. Rehomogenized melt inclusions from E-MORB, T-MORB, and N-MORB lavas have been analyzed by electron and ion microprobe for major and trace elements. The depleted and enriched lavas, as well as their melt inclusions, have very similar compatible element concentrations (major elements, Sr, Ni and Cr). Inclusion compositions are more primitive than, yet collinear with, the host lava suites. In contrast, the minor and trace element characteristics of melt inclusions from depleted and enriched lavas are different both in range and absolute concentration. N-MORB lavas contain both depleted and enriched melt inclusions, and therefore exhibit the largest compositional range (K₂O: 0.01 to 0.4 oxide wt%, P₂O₅: <0.01 to 0.2 oxide wt%, La_N: 7 to 35, Yb_N: 1 to 13, and Ti/Zr: <100 to 1300). E-MORB lavas contain only enriched inclusions, and are therefore relatively homogeneous (K₂O: 0.32 to 0.9 oxide wt %, P₂O₅: 0.02 to 0.35 oxide wt%, La_N: 11 to 60, Yb_N: 4 to 21, and Ti/Zr: ∼100). In addition, the most primitive E-32 inclusions are similar in composition to the most enriched inclusions from the depleted hosts. Major element data for melt inclusions from both N-MORB and E-MORB lavas suggest that the magmas lie on a low pressure cotectic, consistent with a petrogenesis including fractional crystallization. However, the minor and trace element compositions in melt inclusions vary independently of the major element composition implying an alternative history. When fractionation-corrected, inclusion compositions correlate with their host glass composition. Hence, the degree of enrichment of the lavas is a function of the composition of aggregated melts, not of processing in the upper mantle or lower crust. Based on this fact, the lava suites are not produced from a single parent magma, but from a suite of primary magmas. The chemistry of the melt inclusions from the enriched lavas is consistent with a derivation from variable percentages of partial melting within the spinel stability field by a process of open system (continuous or critical) melting assuming a depleted lherzolite source veined with clinopyroxenite. The low percentage melts are dominantly enriched melts of the clinopyroxenite. In contrast, the depleted lavas were created by melting of a harzburgite source, possibly fluxed with a fluid enriched in K, Ba and the LREE. Such a source was likely melted up to or past the point at which all of its clinopyroxene was consumed. This set of characteristics is consistent with a scenario by which diverse melts produced at different depths travel through the melting regime to the base of the crust without homogenizing en route. The homogeneous major element characteristics are created in the lower crust by fractional crystallization and reaction with lower crustal gabbros. Therefore, the degree of decoupling between major and trace element characteristics of the melt inclusions (and lavas) is dictated by the reaction rate of the melts with the materials in the conduit walls, as well as the residence times and flux rate, in the upper mantle and lower crust. Received: 2 December 1997 / Accepted: 27 August 1998     

Melt inclusions in scoria and associated mantle xenoliths of Puy Beaunit Volcano,Chaîne des Puys,Massif Central,France

In order to characterize the composition of the parental melts of intracontinental alkali-basalts, we have undertaken a study of melt and fluid inclusions in olivine crystals in basaltic scoria and associated upper mantle nodules from Puy Beaunit, a volcano from the Chaîne des Puys volcanic province of the French Massif Central (West-European Rift system). Certain melt inclusions were experimentally homogenised by heating-stage experiments and analysed to obtain major- and trace-element compositions. In basaltic scoria, olivine-hosted melt inclusions occur as primary isolated inclusions formed during growth of the host phase. Some melt inclusions contain both glass and daughter minerals that formed during closed-system crystallisation of the inclusion and consist mainly of clinopyroxene, plagioclase and rhönite crystals. Experimentally rehomogenised and naturally quenched, glassy inclusions have alkali-basalt compositions (with SiO₂ content as low as 42 wt%, MgO>6 wt%, Na₂O+K₂O>5 wt%, Cl~1,000–3,000 ppm and S~400–2,000 ppm), which are consistent with those expected for the parental magmas of the Chaîne des Puys magmatic suites. Their trace-element signature is characterized by high concentration(s) of LILE and high LREE/HREE ratios, implying an enriched source likely to have incorporated small amounts of recycled sediments. In olivine porphyroclasts of the spinel peridotite nodules, silicate melt inclusions are secondary in nature and form trails along fracture planes. They are generally associated with secondary CO₂ fluid inclusions containing coexisting vapour and liquid phases in the same trail. This observation and the existence of multiphase inclusions consisting of silicate glass and CO₂-rich fluid suggest the former existence of a CO₂-rich silicate melt phase. Unheated glass inclusions have silicic major-element compositions, with normative nepheline and olivine components, ~58 wt% SiO₂, ~9 wt% total alkali oxides, <3 wt% FeO and MgO. They also have high chlorine levels (>3,000 ppm) but their sulphur concentrations are low (<200 ppm). Comparison with experimental isobaric trends for peridotite indicates that they represent high-pressure (~1.0 GPa) trapped aliquots of near-solidus partial melts of spinel peridotite. Following this hypothesis, their silica-rich compositions would reflect the effect of alkali oxides on the silica activity coefficient of the melt during the melting process. Indeed, the silica activity coefficient decreases with addition of alkalis around 1.0 GPa. For mantle melts coexisting with an olivine-orthopyroxene-bearing mineral assemblage buffering SiO₂ activity, this decrease is therefore compensated by an increase in the SiO₂ content of the melt. Because of their high viscosity and the low permeability of their matrix, these near-solidus peridotite melts show limited ability to segregate and migrate, which can explain the absence of a chemical relationship between the olivine-hosted melt inclusions in the nodules and in basaltic scoria.     

Carbon Enrichment in the Lithospheric Mantle: Evidence from the Melt Inclusions in Mantle Xenoliths from the Hainan Basalts

It is generally believed that the lithospheric mantle and the mantle transition zone are important carbon reservoirs. However, the location of carbon storage in Earth’s interior and the reasons for carbon enrichment remain unclear. In this study, we report CO₂-rich olivine-hosted melt inclusions in the mantle xenoliths of late Cenozoic basalts from the Penglai area, Hainan Province, which may shed some light on the carbon enrichment process in the lithospheric mantle. We also present ...     

Constraining magma sources using primitive olivine-hosted melt inclusions from Puñalica and Sangay volcanoes (Ecuador)

Constraining arc magma sources at continental arc settings is a delicate task, because chemical signatures from crustal processes obscure the slab and mantle signatures. Here, we present major, trace, and volatile element compositions of olivine-hosted melt inclusions (Fo_82–89) selected from the most primitive lavas (Mg# >?60) from two Ecuadorian volcanoes (Puñalica and Sangay) situated at the southern termination of the Andean Northern Volcanic Zone. Melt inclusions (MI) from Puñalica are nepheline normative and have basaltic-to-basaltic-andesite compositions (45–56 wt% SiO₂) similar to peridotite-derived melts. Sangay MI is also nepheline normative, with high CaO (up to 16 wt% and CaO/Al₂O₃?<?1) and low silica contents (41.9–44.5 wt%) pointing out an amphibole-bearing clinopyroxenite source. Both volcanoes display volatile-rich compositions (up to 6100 ppm Cl, 2200 ppm F, and 6700 ppm S). These MI cannot be related to their host lavas by fractional crystallization, implying that they represent true primitive liquids. The source of Puñalica MI was metasomatized by slab-derived melts that imprints its low Ba/Th, Sr/Th, and high Th/La (average values of 66, 129, and 0.22, respectively). On the contrary, the slab component added to the source of Sangay MI has a higher Ba/Th, Sr/Th, and low Th/La (average values of 261, 517, and 0.11, respectively) which could suggest a relative contribution of aqueous fluids. This dichotomy is related to the presence of the Grijalva Fracture Zone that separates a younger and hotter oceanic crust to the north (below Puñalica) from a colder and older oceanic crust to the south (below Sangay).     

Revisiting the compositions and volatile contents of olivine-hosted melt inclusions from the Mount Shasta region: implications for the formation of high-Mg andesites

Primitive chemical characteristics of high-Mg andesites (HMA) suggest equilibration with mantle wedge peridotite, and they may form through either shallow, wet partial melting of the mantle or re-equilibration of slab melts migrating through the wedge. We have re-examined a well-studied example of HMA from near Mt. Shasta, CA, because petrographic evidence for magma mixing has stimulated a recent debate over whether HMA magmas have a mantle origin. We examined naturally quenched, glassy, olivine-hosted (Fo_87–94) melt inclusions from this locality and analyzed the samples by FTIR, LA-ICPMS, and electron probe. Compositions (uncorrected for post-entrapment modification) are highly variable and can be divided into high-CaO (>10 wt%) melts only found in Fo > 91 olivines and low-CaO (<10 wt%) melts in Fo 87–94 olivine hosts. There is evidence for extensive post-entrapment modification in many inclusions. High-CaO inclusions experienced 1.4–3.5 wt% FeO^T loss through diffusive re-equilibration with the host olivine and 13–28 wt% post-entrapment olivine crystallization. Low-CaO inclusions experienced 1–16 wt% olivine crystallization with <2 wt% FeO^T loss experienced by inclusions in Fo > 90 olivines. Restored low-CaO melt inclusions are HMAs (57–61 wt% SiO₂; 4.9–10.9 wt% MgO), whereas high-CaO inclusions are primitive basaltic andesites (PBA) (51–56 wt% SiO₂; 9.8–15.1 wt% MgO). HMA and PBA inclusions have distinct trace element characteristics. Importantly, both types of inclusions are volatile-rich, with maximum values in HMA and PBA melt inclusions of 3.5 and 5.6 wt% H₂O, 830 and 2,900 ppm S, 1,590 and 2,580 ppm Cl, and 500 and 820 ppm CO₂, respectively. PBA melts are comparable to experimental hydrous melts in equilibrium with harzburgite. Two-component mixing between PBA and dacitic magma (59:41) is able to produce a primitive HMA composition, but the predicted mixture shows some small but significant major and trace element discrepancies from published whole-rock analyses from the Shasta locality. An alternative model that involves incorporation of xenocrysts (high-Mg olivine from PBA and pyroxenes from dacite) into a primary (mantle-derived) HMA magma can explain the phenocryst and melt inclusion compositions but is difficult to evaluate quantitatively because of the complex crystal populations. Our results suggest that a spectrum of mantle-derived melts, including both PBA and HMA, may be produced beneath the Shasta region. Compositional similarities between Shasta parental melts and boninites imply similar magma generation processes related to the presence of refractory harzburgite in the shallow mantle.     

Geochemical characteristics of the La Réunion mantle plume source inferred from olivine-hosted melt inclusions from the adventive cones of Piton de la Fournaise volcano (La Réunion Island)

Major and trace element compositions were obtained for bulk rocks and melt inclusions hosted in olivine crystals (Fo > 85) from the adventive cones of the Piton de La Fournaise volcano (La Réunion Island). Ratios of highly incompatible trace elements for these magmas are used to identify the nature of the La Réunion mantle plume source. Although adventive cone lavas display unusual major element compositions compared to the historical lavas of the volcano (e.g., lower CaO/Al₂O₃), trace element data suggest that the magmas emitted by the adventive cones originate from a common chemical source. This source may correspond to either a homogeneous mixed source of different mantle components or a near-primitive less-differentiated mantle source. The melt inclusions display ratios of highly incompatible elements (e.g., Th/La, Nb/La) which are similar to primitive mantle values, and lower Nb/U ratios compared to most oceanic basalts. These results and previous isotopic and trace element data suggest that La Réunion plume samples a source which is intermediate between a primitive-like mantle domain and a slightly depleted one almost unaffected by the recycling processes. This source could have originated from early depletion of the primitive mantle. Assuming a depletion 4.45 Gyr ago, ~10% melting of this slightly depleted source could explain the enriched trace element concentrations of the melt inclusions.     

The water and trace element contents of melt inclusions across an active subduction zone

Water concentrations of olivine-hosted melt inclusions show no consistent variation across the northern part of the Central American subduction zone in southeastern Guatemala. Magmatic water contents remain moderately high (~2 wt%) throughout the back-arc region. Melt inclusions from some of these back-arc basalts also have notably high CO₂ contents (>900 ppm CO₂). The B and B/Ce ratios of melt inclusions systematically decline across the arc, the first parameters to exhibit systematic changes across southeastern Guatemala. It appears, therefore, that dehydration-driven, flux-melting persists across the arc, although decompression melting is of approximately equal importance in the back-arc region. Dehydration of the slab/wedge region is regarded as semi-continuous down-dip, to depths of at least 175–200 km. Moderate water contents are maintained by stepwise dehydration reactions, while truly incompatible fluid mobile elements are progressively stripped from the Cocos plate. The notably high CO₂ contents of some back-arc basalts may indicate increasing devolatilization of subducted carbonate sediments with slab depth. The moderate H₂O contents of back-arc basaltic magmas has likely contributed to their early fractionation of clinopyroxene around the Moho.Editorial responsibility: T.L. Grove     

Variations in melting dynamics and mantle compositions along the Eastern Volcanic Zone of the Gakkel Ridge: insights from olivine-hosted melt inclusions

We present major element, trace element, and volatile concentrations from 66 naturally glassy, olivine-hosted melt inclusions erupted along the Eastern Volcanic Zone (EVZ) of the ultraslow-spreading Gakkel Ridge. Melt inclusion compositions suggest that there are systematic variations in the mantle source composition and melting dynamics from the eastern to the western end of the EVZ. This includes increasing water contents and highly incompatible trace element concentrations (e.g., Ba and Nb) and decreasing light and middle rare earth element concentrations. Ratios of light to heavy rare earth elements in the easternmost melt inclusions are relatively homogeneous, but become more variable to the west. To determine the source of the geochemical variability observed along the EVZ, we model trace elements associated with mantle melting in one- and two-component systems. We consider four possible mantle sources and a range of melting regime shapes, from a full melting triangle to a vertical melting column centered beneath the ridge axes. The observed geochemical variations can be explained by melting of a heterogeneous mantle source composed of depleted MORB mantle plus a metasomatized mantle, where the proportion of the metasomatized component and the extent of melting increases toward the west. Lower rare earth element concentrations and trace element ratios in the westernmost sites also suggest inefficient melt focusing from the outer edges of the melting region. Our results indicate that despite variations in the size of the melting zone and the composition of the mantle source along the ridge axis, the region over which the melts are pooled back to the ridge axis is relatively constant (~10–20 km), suggesting that there is a limit to the distance melts can be transported from off-axis in ultraslow-spreading environments.     

Two mantle sources, two plumbing systems: tholeiitic and alkaline magmatism of the Maymecha River basin, Siberian flood volcanic province

Rocks of two distinctly different magma series are found in a ∼4000-m-thick sequence of lavas and tuffs in the Maymecha River basin which is part of the Siberian flood-volcanic province. The tholeiites are typical low-Ti continental flood basalts with remarkably restricted, petrologically evolved compositions. They have basaltic MgO contents, moderate concentrations of incompatible trace elements, moderate fractionation of incompatible from compatible elements, distinct negative Ta(Nb) anomalies, and _Nd values of 0 to +2. The primary magmas were derived from a relatively shallow mantle source, and evolved in large crustal magma chambers where they acquired their relatively uniform compositions and became contaminated with continental crust. An alkaline series, in contrast, contains a wide range of rock types, from meymechite and picrite to trachytes, with a wide range of compositions (MgO from 0.7 to 38 wt%, SiO₂ from 40 to 69 wt%, Ce from 14 to 320 ppm), high concentrations of incompatible elements and extreme fractionation of incompatible from compatible elements (Al₂O₃/TiO₂∼1; Sm/Yb up to 11). These rocks lack Ta(Nb) anomalies and have a broad range of _Nd values, from −2 to +5. The parental magmas are believed to have formed by low-degree melting at extreme mantle depths (>200 km). They bypassed the large crustal magma chambers and ascended rapidly to the surface, a consequence, perhaps, of high volatile contents in the primary magmas. The tholeiitic series dominates the lower part of the sequence and the alkaline series the upper part; at the interface, the two types are interlayered. The succession thus provides evidence of a radical change in the site of mantle melting, and the simultaneous operation of two very different crustal plumbing systems, during the evolution of this flood-volcanic province. Received: 6 January 1998 / Accepted: 29 June 1998     

Sixty thousand years of magmatic volatile history before the caldera-forming eruption of Mount Mazama, Crater Lake, Oregon

The well-documented eruptive history of Mount Mazama, Oregon, provides an excellent opportunity to use pre-eruptive volatile concentrations to study the growth of an explosive silicic magmatic system. Melt inclusions (MI) hosted in pyroxene and plagioclase crystals from eight dacitic–rhyodacitic eruptive deposits (71–7.7?ka) were analyzed to determine variations in volatile-element concentrations and changes in magma storage conditions leading up to and including the climactic eruption of Crater Lake caldera. Temperatures (Fe–Ti oxides) increased through the series of dacites, then decreased, and increased again through the rhyodacites (918–968 to ~950 to 845–895?°C). Oxygen fugacity began at nickel–nickel-oxide buffer (NNO) +0.8 (71?ka), dropped slightly to NNO +0.3, and then climbed to its highest value with the climactic eruption (7.7?ka) at NNO +1.1 log units. In parallel with oxidation state, maximum MI sulfur concentrations were high early in the eruptive sequence (~500?ppm), decreased (to ~200?ppm), and then increased again with the climactic eruption (~500?ppm). Maximum MI sulfur correlates with the Sr content (as a proxy for LREE, Ba, Rb, P₂O₅) of recharge magmas, represented by basaltic andesitic to andesitic enclaves and similar-aged lavas. These results suggest that oxidized Sr-rich recharge magmas dominated early and late in the development of the pre-climactic dacite–rhyodacite system. Dissolved H₂O concentrations in MI do not, however, correlate with these changes in dominant recharge magma, instead recording vapor solubility relations in the developing shallow magma storage and conduit region. Dissolved H₂O concentrations form two populations through time: the first at 3–4.6 wt% (with a few extreme values up to 6.1 wt%) and the second at ≤2.4 wt%. CO₂ concentrations measured in a subset of these inclusions reach up to 240?ppm in early-erupted deposits (71?ka) and are below detection in climactic deposits (7.7?ka). Combined H₂O and CO₂ concentrations and solubility models indicate a dominant storage region at 4–7?km (up to 12?km), with drier inclusions that diffusively re-equilibrated and/or were trapped at shallower depths. Boron and Cl (except in the climactic deposit) largely remained in the melt, suggesting vapor–melt partition coefficients and gas fractions were low. Modeled Li, F, and S vapor–melt partition coefficients are higher than those of B and Cl. The decrease in maximum MI CO₂ concentration following the earliest dacitic eruptions is interpreted to result from a broadening of the shallow storage region to greater than the diameter of subjacent feeders, so that greater proportions of reservoir magma were to the side of CO₂-bearing vapor bubbles ascending vertically from the locus of recharge magma injection, thereby escaping recarbonation by streaming vapor bubbles. The Mazama melt inclusions provide a picture of a growing magma storage region, where chemical variations in melt and magma occur due to changes in the nature and supply rate of magma recharge, the timing of degassing, and the possible degree of equilibration with gases from below.     

Fluid and melt inclusions in the Mesozoic Fangcheng basalt from North China Craton: implications for magma evolution and fluid/melt-peridotite reaction

Melt inclusions and fluid inclusions in the Fangcheng basalt were investigated to understand the magma evolution and fluid/melt-peridotite interaction. Primary silicate melt inclusions were trapped in clinopyroxene and orthopyroxene phenocrysts in the Fangcheng basalt. Three types of melt inclusions (silicate, carbonate, and sulfide) coexisting with fluid inclusions occur in clinopyroxene xenocrysts and clinopyroxene in clinopyroxenite xenoliths. In situ laser-ablation ICP-MS analyses of major and trace element compositions on individual melt inclusions suggest that the silicate melt inclusions in clinopyroxene and orthopyroxene phenocrysts were trapped from the same basaltic magma. The decoupling of major and trace elements in the melt inclusions indicates that the magma evolution was controlled by melt crystallization and contamination from entrapped ultramafic xenoliths. Trace element patterns of melt inclusions are similar to those of the average crust of North China Craton and Yangtze Craton, suggesting a considerable crustal contribution to the magma source. Calculated parental melt of the Fangcheng basalt has features of low MgO (5.96 wt%), high Al₂O₃ (16.81 wt%), Sr (1,670 ppm), Y (>35 ppm), and high Sr/Y (>40), implying that subducted crustal material was involved in the genesis of the Fangcheng basalt. The coexisting fluid and melt inclusions in clinopyroxene xenocrysts and in clinopyroxene of xenoliths record a rare melt-peridotite reaction, that is olivine + carbonatitic melt₁ (rich in Ca) = clinopyroxene + melt₂ ± CO₂. The produced melt₂ is enriched in LREE and CO₂ and may fertilize the mantle significantly, which we consider to be the cause for the rapid replacement of lithospheric mantle during the Mesozoic in the region.     

Variations in Melt Productivity and Melting Conditions along SWIR (70{degrees}E-49{degrees}E): Evidence from Olivine-hosted and Plagioclase-hosted Melt Inclusions

Melt inclusion and host glass compositions from the easternend of the Southwest Indian Ridge show a progressive depletionin light rare earth elements (LREE), Na₈ and (La/Sm)_n, but anincrease in Fe₈, from the NE (64°E) towards the SW (49°E).These changes indicate an increase in the degree of mantle meltingtowards the SW and correlate with a shallowing of the ridgeaxial depth and increase in crustal thickness. In addition,LREE enrichment in both melt inclusions and host glasses fromthe NE end of the ridge are compatible with re-fertilizationof a depleted mantle source. The large compositional variations(e.g. P₂O₅ and K₂O) of the melt inclusions from the NE end ofthe ridge (64°E), coupled with low Fe₈ values, suggest thatmelts from the NE correspond to a variety of different batchesof melts generated at shallow levels in the mantle melting column.In contrast, the progressively more depleted compositions andhigher Fe₈ values of the olivine- and plagioclase-hosted meltinclusions at the SW end of the studied region (49°E), suggestthat these melt inclusions represent batches of melt generatedby higher degrees of melting at greater mean depths in the mantlemelting column. Systematic differences in Fe₈ values betweenthe plagioclase- and the olivine-hosted melt inclusions in theSW end (49°E) of the studied ridge area, suggest that theplagioclase-hosted melt inclusions represent final batches ofmelt generated at the top of the mantle melting column, whereasthe olivine-hosted melt inclusions correspond to melts generatedfrom less depleted, more fertile mantle at greater depths. KEY WORDS: basalt; melt inclusions; olivine; plagioclase; Southwest Indian Ridge     

Constraints from melt inclusions and their host olivines on the petrogenesis of Oligocene-Early Miocene Xindian basalts, Chifeng area, North China Craton

The geochemical characteristics of melt inclusions and their host olivines provide important information on the processes that create magmas and the nature of their mantle and crustal source regions. We report chemical compositions of melt inclusions, their host olivines and bulk rocks of Xindian basalts in Chifeng area, North China Craton. Compositions of both bulk rocks and melt inclusions are tholeiitic. Based on petrographic observations and compositional variation of melt inclusions, the crystallizing sequence of Xindian basalts is as follows: olivine (at MgO > ~5.5 wt%), plagioclase (beginning at MgO = ~5.5 wt%), clinopyroxene and ilmenite (at MgO < 5.0 wt%). High Ni contents and Fe/Mn ratios, and low Ca and Mn contents in olivine phenocrysts, combining with low CaO contents of relatively high MgO melt inclusions (MgO > 6 wt%), indicate that Xindian basalts are possibly derived from a pyroxenite source rather than a peridotite source. In the CS-MS-A diagram, all the high MgO melt inclusions (MgO > 6.0 wt%) project in the field between garnet + clinopyroxene + liquid and garnet + clinopyroxene + orthopyroxene + liquid near 3.0 GPa, further suggesting that residual minerals are mainly garnet and clinopyroxene, with possible presence of orthopyroxene, but without olivine. Modeling calculations using MELTS show that the water content of Xindian basalts is 0.3–0.7 wt% at MgO = 8.13 wt%. Using 20–25 % of partial melting estimated by moderately incompatible element ratios, the water content in the source of Xindian basalts is inferred to be ≥450 ppm, much higher than 6–85 ppm in dry lithospheric mantle. The melting depth is inferred to be ~3.0 GPa, much deeper than that of tholeiitic lavas (<2.0 GPa), assuming a peridotite source with a normal mantle potential temperature. Such melting depth is virtually equal to the thickness of lithosphere beneath Chifeng area (~100 km), suggesting that Xindian basalts are derived from the asthenospheric mantle, if the lithospheric lid effect model is assumed.     

Lead isotope variability in olivine-hosted melt inclusions from Iceland

The lead isotope and trace element compositions of a suite of olivine-hosted melt inclusions in primitive lava flows from the Reykjanes Peninsula in Iceland show extreme variability. Much of this variability is present in the composition of inclusions from one hand specimen of Háleyjabunga, a depleted picrite lava shield that erupted 13 ka. ²⁰⁸Pb/²⁰⁶Pb compositions in this sample span 50-90% of the total range found in Atlantic MORB, indicating that high-amplitude compositional heterogeneity is present in the mantle source of melts that aggregated to form a single eruption. The trace element and isotopic trends in the melt inclusions are coincident with those in whole rock samples from young lava flows of the Reykjanes Peninsula, and extend the total range of variation towards more depleted compositions. The incompatible trace element and lead isotope compositions of the inclusions are strongly coupled and lie close to binary mixing trends between the extreme melt inclusion compositions. These relationships indicate that the trace element variation in the melt inclusions reflects heterogeneity in the composition of the mantle source entering the melting region under the Reykjanes Peninsula. Large positive Sr concentration anomalies are present in three of the inclusions, but do not correlate with indicators of mantle melting or source variations and are likely to arise by reaction with plagioclase during crustal storage. Fractional melting of heterogeneous mantle is predicted to generate melts with a wide range of compositions, filling a large volume in trace element-isotope space. However, the compositional variations observed in the melt inclusions lie close to binary mixing curves. These observations may be accounted for by a two-stage model of melt mixing. The first stage occurs in porous channels that transport melt in the mantle and takes place before inclusion entrapment. This mixing stage generates a bimodal distribution of melt compositions that is supplied from the channels to sub-Moho and lower crustal magma lenses. The second stage of mixing occurs in these chambers, producing the binary mixing trends recorded in the inclusion compositions. The distribution of isotopic compositions observed in the melt inclusions and whole rock samples from the Reykjanes Peninsula is therefore controlled by melt mixing. These results have important implications for the interpretation of basalt composition in terms of distinct compositional entities within the upwelling solid mantle under mid-ocean ridges and ocean islands.     

Genesis and evolution of subduction-zone andesites: evidence from melt inclusions

Andesite magmatism plays a major role in continental crustal growth, but its subduction-zone origin and evolution is still a hotly debated topic. Compared with whole-rock analyses, melt inclusions (MIs) can provide important direct information on the processes of magma evolution. In this article, we synthesize data for melt inclusions hosted by phenocrysts in andesites, extracted from the GEOROC global compilation. These data show that melt inclusions entrapped by different phenocrysts have distinct compositions: olivine-hosted melt inclusions have basalt and basaltic andesite compositions, whereas melt inclusions in clinopyroxene and othopyroxene are mainly dacitic to rhyolitic. Hornblende-hosted melt inclusions have rhyolite composition. The compositions of melt inclusions entrapped by plagioclase are scattered, spanning from andesite to rhyolite. On the basis of the compositional data, we propose a mixing model for the genesis of the andesite, and a two-chamber mechanism to account for the evolution of the andesite. First, andesite melt is generated in the lower chamber by mixing of a basaltic melt derived from the mantle and emplaced in the lower crust with a felsic melt resulting from partial melting of crustal rocks. Olivine and minor plagioclase likely crystallize in the lower magma chamber. Secondly, the andesite melt ascends into the upper chamber where other phenocrysts crystallize. According to SiO₂-MgO diagrams of the MIs, evolution of the andesite in the upper chamber can be subdivided into two distinct stages. The early stage (I) is characterized by a phenocrystal assemblage of clinopyroxene + othopyroxene + plagioclase, whereas the late stage (II) is dominated by crystallization of plagioclase + hornblende.     

Shallow-level decompression crystallisation and deep magma supply at Shiveluch Volcano

Recent petrological studies indicate that some crustal magma chambers may be built up slowly by the intermittent ascent and amalgamation of small packets of magma generated in a deep-seated source region. Despite having little effect on whole-rock compositions, this process should be detectable as variable melt trace element composition, preserved as melt inclusions trapped in phenocrysts. We studied trace element and H₂O contents of plagioclase- and hornblende-hosted melt inclusions from andesite lavas and pumices of Shiveluch Volcano, Kamchatka. Melt inclusions are significantly more evolved than the whole rocks, indicating that the whole rocks contain a significant proportion of recycled foreign material. H₂O concentrations indicate trapping at a wide range of pressures, consistent with shallow decompression-driven crystallisation. The variation of trace element concentrations indicates up to ∼30% decompression crystallisation, which accounts for crystallisation of the groundmass and rims on phenocrysts. Trace element scatter could be explained by episodic stalling during shallow magma ascent, allowing incompatible element concentrations to increase during isobaric crystallisation. Enrichment of Li at intermediate pH₂O reflects influx and condensation of metal-rich vapours. A set of “exotic melts”, identified by their anomalous incompatible trace element characteristics, indicate variable source chemistry. This is consistent with evolution of individual magma batches with small differences in trace element chemistry, and intermittent ascent of magma pulses. Electronic supplementary material The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

Magmatic processes and mantle heterogeneity beneath the slow-spreading northern Kolbeinsey Ridge segment,North Atlantic

We present new data on mineralogical, major and trace element compositions of lavas from the northernmost segment of the Kolbeinsey Ridge (North Kolbeinsey Ridge, NKR). The incompatible element enriched North Kolbeinsey basalts lie on a crystal fractionation trend which differs from that of the other Kolbeinsey segments, most likely due to higher water contents (~0.2%) in the NKR basalts. The most evolved NKR magmas erupt close to the Jan Mayen Fracture Zone, implying increased cooling and fractionation of the ascending magmas. Mainly incompatible element-enriched basalts, as well as some slightly depleted lavas, erupt on the NKR. They show evidence for mixing between different mantle sources and magma mixing. North Kolbeinsey Ridge magmas probably formed by similar degrees of melting to other Kolbeinsey basalts, implying that no lateral variation in mantle potential temperature occurs on the spreading axis north of the Iceland plume and that the Jan Mayen Fracture Zone does not have a cooling effect on the mantle. Residual garnet from deep melting in garnet peridotite or from enriched garnet pyroxenite veins does not play a role. The incompatible element-enriched source has high Ba/La and Nb/Zr, but must be depleted in iron. The iron-depleted mantle is less dense than surrounding mantle and leads to the formation of the North Kolbeinsey segment and its shallow bathymetry. The enriched NKR source formed from a relatively refractory mantle, enriched by a small degree melt rather than by recycling of enriched basaltic crust. The depleted mantle source resembles the mantle of the Middle Kolbeinsey segment with a depletion in incompatible elements, but a fertile major element composition.     

Multi-stage evolution of the picritic Mælifell rocks,SW Iceland: constraints from mineralogy and inclusions of glass and fluid in olivine

The picritic Mælifell pillow lava series contains olivine macrocrysts (Fo 83.0–91.7) and microphenocrysts (Fo 86.8–88.5), resorbed Cr–Al endiopside, ± plagioclase, and microphenocrysts of Cr-spinel. The most primitive olivine cores (Fo 90–91.7) are probably derived from a peridotitic mantle. Gabbroic adcumulus xenoliths in the lavas contain plagioclase, Cr–Al endiopside and olivine (Fo 85.5–87.5) which overlap compositionally with lava minerals, ± Cr-spinel. This suggests that all pyroxene and much of the olivine ± feldspar in the lavas are xenocrysts. Olivines from the pillow lavas and from the gabbroic xenoliths contain inclusions of Cr-spinel, silicate glass and pure or nearly pure CO₂. Early (type 1) silicate melt inclusions which occur in lava-olivine only, have crystalized 0.1 to 4 vol.% daughter spinel and unknown amounts of olivine during pre-eruptive cooling. Later (type 2) glass inclusions in olivine from the lavas do not contain daughter minerals; similar type 2 inclusions also occur in the xenoliths. High-temperature microthermometry at buffered oxygen fugacity (f _{O 2}) gives a plagioclaseout temperature of about 1230°C for both types of silicate melt inclusions; this was interpreted as the liquidus temperature for type 2 inclusions. Molar volumes of undisturbed CO₂ inclusions in olivine from both lavas and xenoliths correspond to a depth of trapping of 7–10 km (2.2–3.0 kbar) at 1230°C. This is interpreted as a minimum depth to a partially molten layer near the crust/mantle boundary in the rift zone. The xenoliths are thus probably derived from a layered olivine-gabbro complex similar to those occurring in ophiolite complexes.     

Compositional and thermal evolution of olivine-hosted melt inclusions in small-volume basaltic eruptions: a “simple” example from Dotsero Volcano,NW Colorado

Olivine-hosted melt inclusions have been analyzed from the young (4,150 ± 300 ybp) Dotsero basaltic (48.2 wt% SiO₂) lava flow in Northwest Colorado, USA. Silicate melt-inclusion compositions have a bimodal distribution (41–46 wt% SiO₂ and 47–50 wt% SiO₂). Low-Si melt inclusions record high pre-eruptive sulfur concentrations (>1,000 ppm S) and variations in their major- and trace-element compositions appears to be related to shallow assimilation of local basement sandstone. Whole-rock compositions are modeled as a contamination of low-Si inclusion compositions with ~10 wt% sandstone. Host olivine crystallization may have accompanied magma injection into a shallow storage chamber. In contrast to the low-Si melt inclusions, the high-Si population is relatively degassed and records late-stage rapid crystallization either during or post-eruption. Hopper or skeletal olivine grains in conjunction with the bimodal inclusion compositions suggest relatively rapid cooling rates at the time of eruption and inclusion entrapment. Inclusion compositions, in conjunction with mineral textures, therefore provide a more complete picture of shallow magma processes, coupling the relative timing of undercooling and crystallization, assimilation and melt compositional evolution. Most of the inclusion and host textural and compositional data indicates late and very shallow petrogenetic processes and does not appear to record deeper (mid-, lower-crustal) processes.